Date: Mon, 28 Aug 2006 12:00:04 +0200 From: "felix.schalck" <felix.schalck@gmx.net> To: freebsd-acpi@freebsd.org Subject: Missing battery life Status by moving from 5.4 to 6.1 Message-ID: <44F2BEA4.6070003@gmx.net>
next in thread | raw e-mail | index | archive | help
Hi,
After a few months "sleeping" I finally decided to upgrade my BSD system
on my little CLEVO M120 W, moving from 5.4 to 6-STABLE.
I was quite happy, discovering the long-awaited WPA support working
without problems, but I lost battery current voltage information,
although it worked fine within my former release (5.4). I played around
a few days, without success: quite a lot of work might have been done,
since 5.4, on acpi code; so I'm kind of lost...
Any Help to get it working again would be appreciated.
Thanks a lot,
Felix
PS: There is another thing I do not understand: after boot, ac
adapter's status always shows 'offline' although it IS runing on AC
power. But after un & re-plugging the adapter, status seems to work fine.
----------------------------------------------------
Here dmesg's output: (whith hw.acpi.verbose on )
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #11: Mon Aug 28 09:18:01 CEST 2006
chaman@sacha.free.fr:/usr/obj/usr/src/sys/M120_CW
ACPI set debug layer 'ACPI_ALL_COMPONENTS ACPI_ALL_DRIVERS' level
'ACPI_LV_ERRORS'
ACPI APIC Table: <INTEL MONTARA >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1039007744 (990 MB)
avail memory = 1007763456 (961 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
ichwd module loaded
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD \M-p> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807
mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 16 at device 2.0 on pci0
agp0: detected 32636k stolen memory
agp0: aperture size is 128M
drmsub0: <Intel i852GM/i855GM GMCH>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized i915 1.4.0 20060119
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem
0xe0100000-0xe01003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem
0xe0201000-0xe02010ff irq 18 at device 6.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:90:f5:37:1a:8c
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 7.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xe0200000-0xe0200fff irq 16 at
device 8.0 on pci2
iwi0: Ethernet address: 00:0e:35:9d:66:ba
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem
0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 17 at device 31.5 on pci0
pcm0: <Avance Logic ALC202 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xcc800-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596004776 Hz quality 800
Timecounters tick every 1.000 msec
acpi_acad0: acline initialization start
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ad0: 57231MB <HTE726060M9AT00 MH4OA6AA> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/SB00> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L532A SB00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
iwi0: link state changed to UP
battery0: battery initialization failed, giving up
-------------------------------------------
acpiconf -i batt:
Design capacity: 2400 mAh
Last full capacity: 1401 mAh
Technology: secondary (rechargeable)
Design voltage: 11100 mV
Capacity (warn): 160 mAh
Capacity (low): 100 mAh
Low/warn granularity: 64 mAh
Warn/full granularity: 64 mAh
Model number: M12XX-4
Serial number: 00872
Type: LION
OEM info: EONEMOLI
State: not present
Voltage: unknown
---------------------------------------------
sysctl -a | grep acpi
acpi_perf 0 0K - 2 64
acpidev 62 2K - 62 32
acpisem 84 6K - 84 64
acpitask 0 0K - 138 32
acpica 1533 164K - 21731 16,32,64,128,256,512,1024,2048
debug.acpi.level: NONE
debug.acpi.layer: ACPI_UTILITIES ACPI_HARDWARE ACPI_EVENTS ACPI_TABLES
ACPI_NAMESPACE ACPI_PARSER ACPI_DISPATCHER ACPI_EXECUTER ACPI_RESOURCES
ACPI_CA_DEBUGGER ACPI_OS_SERVICES ACPI_CA_DISASSEMBLER
ACPI_ALL_COMPONENTS ACPI_AC_ADAPTER ACPI_BATTERY ACPI_BUS ACPI_BUTTON
ACPI_EC ACPI_FAN ACPI_POWERRES ACPI_PROCESSOR ACPI_THERMAL ACPI_TIMER
ACPI_ALL_DRIVERS
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 0x20041119
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85 C4/185
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00% 0.00%
hw.acpi.acline: 0
hw.acpi.battery.life: -1
hw.acpi.battery.time: -1
hw.acpi.battery.state: 7
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 55.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 0
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 94.8C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 99.8C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1011424
dev.acpi.0.%desc: PTLTD ð
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.PCI0.LPCB.MBD0
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C02 _UID=1
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c
dev.acpi_ec.0.%driver: acpi_ec
dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPCB.H_EC
dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
dev.acpi_ec.0.%parent: acpi0
dev.pci_link.0.%parent: acpi0
dev.pci_link.1.%parent: acpi0
dev.pci_link.2.%parent: acpi0
dev.pci_link.3.%parent: acpi0
dev.pci_link.4.%parent: acpi0
dev.pci_link.5.%parent: acpi0
dev.pci_link.6.%parent: acpi0
dev.pci_link.7.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.acpi_throttle.0.%desc: ACPI CPU Throttling
dev.acpi_throttle.0.%driver: acpi_throttle
dev.acpi_throttle.0.%parent: cpu0
dev.acpi_throttle.0.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1
5000/-1 3750/-1 2500/-1 1250/-1
dev.acpi_acad.0.%desc: AC Adapter
dev.acpi_acad.0.%driver: acpi_acad
dev.acpi_acad.0.%location: handle=\_SB_.ADP1
dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
dev.acpi_acad.0.%parent: acpi0
dev.battery.0.%parent: acpi0
dev.acpi_lid.0.%desc: Control Method Lid Switch
dev.acpi_lid.0.%driver: acpi_lid
dev.acpi_lid.0.%location: handle=\_SB_.LID0
dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
dev.acpi_lid.0.%parent: acpi0
dev.acpi_button.0.%desc: Power Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.PWRB
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_button.1.%desc: Sleep Button
dev.acpi_button.1.%driver: acpi_button
dev.acpi_button.1.%location: handle=\_SB_.SLPB
dev.acpi_button.1.%pnpinfo: _HID=PNP0C0E _UID=0
dev.acpi_button.1.%parent: acpi0
dev.acpi_button.1.wake: 1
dev.pcib.0.%parent: acpi0
dev.acpi_tz.0.%desc: Thermal Zone
dev.acpi_tz.0.%driver: acpi_tz
dev.acpi_tz.0.%location: handle=\_TZ_.THRM
dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
dev.acpi_tz.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.atpic.0.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
dev.psmcpnp.0.%parent: acpi0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44F2BEA4.6070003>