Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 22 Oct 2006 22:20:08 +0200
From:      Anders Nordby <anders@FreeBSD.org>
To:        Peter Blok <pblok@bsd4all.org>
Cc:        freebsd-acpi@freebsd.org, freebsd-smp@freebsd.org
Subject:   Re: Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360 ACPIboot problem)
Message-ID:  <20061022202008.GA32530@fupp.net>
In-Reply-To: <000901c6e7a9$0b32b680$8a01a8c0@beast>
References:  <20061004104415.GB23653@fupp.net> <000901c6e7a9$0b32b680$8a01a8c0@beast>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

Nope. This system takes only two processors. It's a 1U system, with not
much space.

I could however get SMP working by switching to another OS profile
(Linux) in the system configuration. The server is old enough to require
a (SmartStart) CD for this to happen, I can not access that
configuration without it. After I did the change, I can see that the CPU
has the feature APIC:

CPU: Intel Pentium III (797.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>

Before that, it did not:

CPU: Intel Pentium III (797.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

PS: Sorry it took some time to check up on this. The server is in a
co-location facility, and I don't go there often.

On Wed, Oct 04, 2006 at 01:34:24PM +0200, Peter Blok wrote:
> According to the acpidump you have CPU=0 and CPU=3. CPU 1 and CPU 2 are
> marked disabled. Are you able to move the CPU hardware wise?
> 
> Peter
> 
> -----Original Message-----
> From: owner-freebsd-smp@freebsd.org [mailto:owner-freebsd-smp@freebsd.org]
> On Behalf Of Anders Nordby
> Sent: Wednesday, October 04, 2006 12:44 PM
> To: John Baldwin
> Cc: freebsd-acpi@freebsd.org; freebsd-smp@freebsd.org
> Subject: Re: Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360
> ACPIboot problem)
> 
> Hi,
> 
> And old mail here, but I still have this problem getting SMP to work on
> the machine.
> 
> On Fri, Jan 06, 2006 at 07:53:17AM -0500, John Baldwin wrote:
> >>  How can I get SMP running? This worked in 5.x and 4.x, I believe.
> > 2) Re: SMP, just to make sure, do you have 'device apic' and 'options SMP'
> in 
> > your kernel?   Also, can you provide the output of 'acpidump -t' so I can
> see 
> > what your APIC table (MADT) looks like.  Also, does the kernel find SMP if
> 
> > you disable ACPI?
> 
> Yes, apic is enabled in the kernel that I run. ACPI is loaded as a
> kernel module. If I disable ACPI, FreeBSD also finds only one processor.
> 
> I still use the custom dsdt as modified after getting instructions by
> you in this PR http://www.freebsd.org/cgi/query-pr.cgi?pr=89545. The
> modifications are:
> 
> --- vm.asl      Sat Jan  7 12:06:14 2006
> +++ vm-fixed.asl        Sat Jan  7 12:08:04 2006
> @@ -5,13 +5,13 @@
>  /*
>    RSDT: Length=52, Revision=1, Checksum=69,
>         OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
> -       Creator ID=Ò, Creator Revision=0x162e
> +       Creator ID=ASL Creator Revision=0x162e
>         Entries={ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 }
>   */
>  /*
>    FACP: Length=116, Revision=1, Checksum=110,
>         OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2,
> -       Creator ID=Ò, Creator Revision=0x162e
> +       Creator ID=ASL Creator Revision=0x162e
>         FACS=0x67ffc0c0, DSDT=0x67ffc200
>         INT_MODEL=APIC
>         Preferred_PM_Profile=Unspecified (0)
> @@ -84,7 +84,7 @@
>  /*
>    SPCR: Length=80, Revision=1, Checksum=14,
>         OEMID=COMPAQ, OEM Table ID=SPCR_ROM, OEM Revision=0x1,
> -       Creator ID=Ò, Creator Revision=0x162e
> +       Creator ID=ASL Creator Revision=0x162e
>   */
>  /*
>   * Intel ACPI Component Architecture
> @@ -1573,7 +1573,7 @@
>          Else
>          {
>              Store ("PCI0._PRT in PIC mode", Debug)
> -            Return (Package (0x08)
> +            Return (Package (0x07)
>              {
>                  Package (0x04)
>                  {
> @@ -1588,14 +1588,6 @@
>                      0x0001FFFF, 
>                      0x01, 
>                      ITR2, 
> -                    0x00
> -                }, 
> -
> -                Package (0x04)
> -                {
> -                    0x0004FFFF, 
> -                    0x00, 
> -                    FAKE, 
>                      0x00
>                  }, 
> 
> I'm running 6.1 on the system now, but still FreeBSD sees only one CPU.
> When booting the system it lists two:
> 
> Processor 1 initialized at 800/133 MHz with 256 Kbyte Cache
> 
> Processor 2 initialized at 800/133 MHz with 256 Kbyte Cache
> 
> 
> If I try to run with acpi but without the modified dsdt, I get these
> pci/cpu/apic/acpi messages on boot:
> 
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
> acpi0: <COMPAQ MICRO> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci_link0: apparently invalid index 0
> pci0: <ACPI PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid
> pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid
> pci3: <ACPI PCI bus> on pcib2
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc6bfffff irq 9 at device 6.0 on pci3
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> 
> With the custom dsdt, I get:
> 
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
>     ACPI-0377: *** Info: Table [SSDT] replaced by host OS
> ACPI: overriding DSDT/SSDT with custom table
>     ACPI-0377: *** Info: Table [DSDT] replaced by host OS
> acpi0: <COMPAQ MICRO> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc
> 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x17
> 7,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid
> pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid
> pci3: <ACPI PCI bus> on pcib2
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6fffff
> f,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dffff
> f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc
> 6bfffff irq 9 at device 6.0 on pci3
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> 
> If I run without ACPI, I get:
> 
> CPU: Intel Pentium III (797.48-MHz 686-class CPU)
> cpu0 on motherboard
> pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on
> motherboard
> pci0: <PCI bus> on pcib0
> ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
> 0xc5000000-0xc
> 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0
> pci0: <display, VGA> at device 3.0 (no driver attached)
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pcib1: <PCI-PCI bridge> at device 5.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci0: <memory> at device 5.1 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x17
> 7,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 3 on
> motherboard
> pci3: <PCI bus> on pcib3
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
> 0xc6fff000-0xc6fffff
> f,0xc6e00000-0xc6efffff irq 7 at device 4.0 on pci3
> fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
> 0xc6dff000-0xc6dffff
> f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3
> ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem
> 0xc6bff000-0xc
> 6bfffff irq 3 at device 6.0 on pci3
> 
> In any case, I only get one CPU. How to fix?
> 
> Acpidump attached.
> 
> Bye,
> 
> -- 
> Anders.
> 
> _______________________________________________
> freebsd-smp@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe@freebsd.org"


-- 
Anders.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061022202008.GA32530>