Date: Sun, 30 Jul 2006 17:37:32 GMT From: MArtin <happy@xboxnews.de> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/101062: Freeze on detect Intel 900 VGA on boot with ACPI Message-ID: <200607301737.k6UHbWEB010314@www.freebsd.org> Resent-Message-ID: <200607301740.k6UHeDrI054808@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 101062 >Category: i386 >Synopsis: Freeze on detect Intel 900 VGA on boot with ACPI >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jul 30 17:40:12 GMT 2006 >Closed-Date: >Last-Modified: >Originator: MArtin >Release: 6.1 >Organization: fbinet >Environment: FreeBSD sam.local 6.1-RELEASE-p3 FreeBSD 6.1-RELEASE-p3 #4: Sun Jul 30 17:51:36 CEST 2006 root@sam.local:/usr/obj/usr/src/sys/SAM i386 >Description: I have Samsung Q30 plus, Freeze on detect VGA on boot with ACPI but without going without right VGAcard intel 900 The bios is uptodate http://notebook.samsung.de/article.asp?artid=B5EBC2DD-17F8-43A6-8D6D-B4222464CA1D&show=specs Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p3 #4: Sun Jul 30 17:51:36 CEST 2006 root@sam.local:/usr/obj/usr/src/sys/SAM Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.20GHz (1196.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 1332609024 (1270 MB) avail memory = 1296105472 (1236 MB) wlan: mac acl policy registered kbd1 at kbdmux0 cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard pci0: <PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 10 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 10 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff at device 29.7 on pci0 $PIR: No matching entry for 0.29.INTD ehci0: Could not allocate irq device_attach: ehci0 attach returned 6 pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib1 cbb0: <RF5C476 PCI-CardBus Bridge> at device 3.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> at device 3.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xe0203000-0xe02037ff irq 5 at device 3.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:f0:41:20:0b:51:ad fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:f0:0b:51:ad fwe0: Ethernet address: 02:00:f0:0b:51:ad fwe0: if_start running deferred for Giant fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xe0200000-0xe0201fff irq 5 at device 5.0 on pci2 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:00:f0:7a:29:42 iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xe0202000-0xe0202fff irq 11 at device 7.0 on pci2 iwi0: Ethernet address: 00:12:f0:dd:a6:98 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 11 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd8000-0xdbfff,0xdc000-0xdffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) ums0: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0, rev 1.10/2.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1196143713 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38147MB <TOSHIBA MK4006GAH BY201A> at ata0-master UDMA100 Trying to mount root from ufs:/dev/ad0s2a iwi0: Please load firmware iwi0: link state changed to UP drmsub1: <Intel i852GM/i855GM GMCH> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0 info: [drm] AGP at 0xe8000000 128MB info: [drm] Initialized i915 1.2.0 20041217 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff at device 29.7 on pci0 $PIR: No matching entry for 0.29.INTD ehci0: Could not allocate irq device_attach: ehci0 attach returned 6 root@sam:/home/happy# >How-To-Repeat: Th sam problem with Current BootOnly Freebsd 7 , >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200607301737.k6UHbWEB010314>