Date: Sun, 14 Oct 2007 16:43:55 +0300 From: "=?WINDOWS-1251?Q?Tapac_=DF=ED=F7=F3=EA?=" <dtla307045@ukr.net> To: bugbusters@FreeBSD.org Subject: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) Message-ID: <E1Ih3l5-000LOa-H5@ffe6.ukr.net>
next in thread | raw e-mail | index | archive | help
Hello, Bugbsters! After a series of sudden reboots, it became necessary to check the temperature of processor and chipset, voltage, and the work of fans. But that was not the driver for SMBus (S5000VSA INTEL) После серии внезапных перезагрузок, возникла необходимость проверять температуру процессоров и чипсета, напряжение, и работу вентиляторов. Но оказалось что нет драйвера для SMBus (INTEL S5000VSA) gala-net# dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #1: Thu Jan 25 12:20:13 EET 2007 taras@gala-net.poltava.ua:/usr/src/sys/i386/compile/GATE-SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (2002.99-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2143289344 (2044 MB) avail memory = 2090860544 (1994 MB) ACPI APIC Table: <INTEL S5000VSA> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 acpi0: <INTEL S5000VSA> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: <ACPI CPU> on acpi0 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: <ACPI CPU> on acpi0 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci5: <ACPI PCI bus> on pcib5 em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5 em0: Ethernet address: 00:15:17:0c:be:e4 em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5 em1: Ethernet address: 00:15:17:0c:be:e5 pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci6: <ACPI PCI bus> on pcib6 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xb8900000-0xb891ffff,0xb8920000-0xb893ffff irq 27 at device 2.0 on pci6 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.15.0 mpt0: Capabilities: ( RAID-0 SAFTE ) mpt0: 1 Active Volume (1 Max) mpt0: 2 Hidden Drive Members (6 Max) pcib7: <PCI-PCI bridge> at device 3.0 on pci0 pci7: <PCI bus> on pcib7 pci0: <base peripheral> at device 8.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci8: <ACPI PCI bus> on pcib8 uhci0: <UHCI (generic) USB controller> port 0x4080-0x409f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x4060-0x407f irq 22 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x4040-0x405f irq 23 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x4020-0x403f irq 22 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <display, VGA> at device 12.0 (no driver attached) em2: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x1400-0x143f mem 0xb8b20000-0xb8b3ffff,0xb8b00000-0xb8b1ffff irq 16 at device 13.0 on pci9 em2: Ethernet address: 00:0e:0c:d8:60:23 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging unlimited ad4: 238475MB <Seagate ST3250620AS 3.AAE> at ata2-master SATA150 Waiting 5 seconds for SCSI devices to settle mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares ) mpt0:vol0(mpt0:0:0): 2 Members: (mpt0:0:0): Stripe Position 0 (mpt0:0:2): Stripe Position 1 mpt0:vol0(mpt0:0:0): RAID-0 - Optimal mpt0:vol0(mpt0:0:0): Status ( Enabled ) (mpt0:vol0:0): Physical (mpt0:0:0), Pass-thru (mpt0:1:0) (mpt0:vol0:0): Online (mpt0:vol0:1): Physical (mpt0:0:2), Pass-thru (mpt0:1:1) (mpt0:vol0:1): Online lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic7: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! da0 at mpt0 bus 0 target 0 lun 0 da0: <LSILOGIC 1030 IS 1000> Fixed Direct Access SCSI-2 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 139756MB (286220288 512 byte sectors: 255H 63S/T 17816C) Trying to mount root from ufs:/dev/da0s1a WARNING: / was not properly dismounted WARNING: /backup1 was not properly dismounted WARNING: /backup2 was not properly dismounted WARNING: /datas was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: mount pending error: blocks 128 files 4 em2: link state changed to UP em1: link state changed to UP ipfw: pullup failed ipfw: pullup failed HELP ME!!!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1Ih3l5-000LOa-H5>