From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 00:19:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 668B416A417 for ; Sun, 23 Dec 2007 00:19:29 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from smtp.infidyne.com (ds9.infidyne.com [88.80.6.206]) by mx1.freebsd.org (Postfix) with ESMTP id 3627713C461 for ; Sun, 23 Dec 2007 00:19:29 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se (c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se [85.229.22.130]) by smtp.infidyne.com (Postfix) with ESMTP id 964EE77FD4; Sun, 23 Dec 2007 01:19:27 +0100 (CET) From: Peter Schuller To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 01:19:21 +0100 User-Agent: KMail/1.9.7 References: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> In-Reply-To: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2614645.98ls3eoqfJ"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200712230119.30705.peter.schuller@infidyne.com> Cc: Robe Subject: Re: Updating ports X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 00:19:29 -0000 --nextPart2614645.98ls3eoqfJ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline > What's the difference between them? The main difference that is relevant to me personally is that portmanager=20 makes no attempt to be too smart about avoiding compilation, and it is full= y=20 restartable without affecting the results. It rebuilds ports in such a way that the result is, in theory, supposed to = be=20 equivalent to what you would have gotten had you installed them all from=20 scratch with your current ports tree. In particular, given a re-build (e.g. upgraded) port X, all ports depending= on=20 X will also be re-built regardless of whether that is required according to= =20 the dependency relation. This is handled in such a way that it is not=20 dependent on the entire procedure completing in one session, as you are wit= h=20 portupgrade (meaning it's restartable, as mentioned above). In practice, I find this is the most useful upgrading method. I have never= =20 been able to use portupgrade for more than a week or two on a real machine= =20 without running into issues (stale dependencies, failed builds due to weak= =20 dependency information, etc). That said, it's not perfect. The implementation is buggy in some ways, and= =20 there are fundamental problems with that upgrading approach (e.g., files=20 moving between packages can cause problems). In the end I tend to either build binary packages from scratch and use=20 portupgrade -afPP to upgrade, or do in-place upgrading with portmanager. =2D-=20 / Peter Schuller PGP userID: 0xE9758B7D or 'Peter Schuller ' Key retrieval: Send an E-Mail to getpgpkey@scode.org E-Mail: peter.schuller@infidyne.com Web: http://www.scode.org --nextPart2614645.98ls3eoqfJ Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQBHbamSDNor2+l1i30RAtV2AJwLzC5wN1K4SlkoeqBpw/4y8AipMACZAVrr XWxRUXKk0H4tBFyOzuZIXRo= =xpWI -----END PGP SIGNATURE----- --nextPart2614645.98ls3eoqfJ-- From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 00:43:59 2007 Return-Path: Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id ABD3516A420 for ; Sun, 23 Dec 2007 00:43:59 +0000 (UTC) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.freebsd.org (Postfix) with ESMTP id 6DC0D13C469 for ; Sun, 23 Dec 2007 00:43:59 +0000 (UTC) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (localhost [127.0.0.1]) by tao.thought.org (8.13.8/8.13.1) with ESMTP id lBN0hwBS064784 for ; Sat, 22 Dec 2007 16:43:58 -0800 (PST) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.13.8/8.13.1/Submit) id lBN0hw91064783 for freebsd-questions@FreeBSD.ORG; Sat, 22 Dec 2007 16:43:58 -0800 (PST) (envelope-from kline) Date: Sat, 22 Dec 2007 16:43:58 -0800 From: Gary Kline To: FreeBSD Mailing List Message-ID: <20071223004357.GA64755@thought.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: With 21 of service to the Unix community. Cc: Subject: recommendations wanted for best audioo wwebsite. slightly OT. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 00:43:59 -0000 A couple months ago I happened upon what appeared to be a high end website for audiophiles. All nature of sound clips, in various formats. Looks like I did not bookmark the site and now I can't locate it. Does anybody on-list have some preferred audio site. This is, obviously, for when/if I get a working sound card swapped back it! tia, guys, gary -- Gary Kline kline@thought.org www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 00:47:57 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D682816A46B for ; Sun, 23 Dec 2007 00:47:57 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from smtp3.utdallas.edu (smtp3.utdallas.edu [129.110.10.49]) by mx1.freebsd.org (Postfix) with ESMTP id CB5A613C461 for ; Sun, 23 Dec 2007 00:47:57 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from [192.168.2.102] (unknown [24.175.90.48]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp3.utdallas.edu (Postfix) with ESMTP id E9C3D654A6 for ; Sat, 22 Dec 2007 18:47:56 -0600 (CST) Date: Sat, 22 Dec 2007 18:47:52 -0600 From: Paul Schmehl To: freebsd-questions@freebsd.org Message-ID: <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> In-Reply-To: <200712230119.30705.peter.schuller@infidyne.com> References: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> <200712230119.30705.peter.schuller@infidyne.com> X-Mailer: Mulberry/4.0.8 (Mac OS X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Re: Updating ports X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 00:47:57 -0000 --On December 23, 2007 1:19:21 AM +0100 Peter Schuller wrote: > > In particular, given a re-build (e.g. upgraded) port X, all ports > depending on X will also be re-built regardless of whether that is > required according to the dependency relation. This is handled in such > a way that it is not dependent on the entire procedure completing in > one session, as you are with portupgrade (meaning it's restartable, as > mentioned above). > I don't understand this statement. I have killed portupgrade on numerous occasions, both locally and remotely, and have never had a problem restarting later. If you mean portupgrade doesn't restart where it left off, then yes, that's true, but only in the sense that it goes through all the ports checking for upgrades before returning to the build you left off at. > In practice, I find this is the most useful upgrading method. I have > never been able to use portupgrade for more than a week or two on a > real machine without running into issues (stale dependencies, failed > builds due to weak dependency information, etc). > I *really* don't understand this. I can count on one hand the number of times that I've run into dependency problems with portupgrade, and all of those were addressed in /usr/port/UPDATING or by simply deinstalling and reinstalling the port in question. Paul Schmehl (pauls@utdallas.edu) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 02:57:01 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1929F16A417 for ; Sun, 23 Dec 2007 02:57:01 +0000 (UTC) (envelope-from fbsd06+RO=f6cc4b1f@mlists.homeunix.com) Received: from turtle-out.mxes.net (turtle-out.mxes.net [216.86.168.191]) by mx1.freebsd.org (Postfix) with ESMTP id F2AE113C465 for ; Sun, 23 Dec 2007 02:57:00 +0000 (UTC) (envelope-from fbsd06+RO=f6cc4b1f@mlists.homeunix.com) Received: from mxout-04.mxes.net (mxout-04.mxes.net [216.86.168.179]) by turtle-in.mxes.net (Postfix) with ESMTP id 32739163F6B for ; Sat, 22 Dec 2007 21:39:00 -0500 (EST) Received: from gumby.homeunix.com. (unknown [87.81.140.128]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp.mxes.net (Postfix) with ESMTP id 3280AD04FF for ; Sat, 22 Dec 2007 21:38:57 -0500 (EST) Date: Sun, 23 Dec 2007 02:38:53 +0000 From: RW To: freebsd-questions@freebsd.org Message-ID: <20071223023853.11ab60e6@gumby.homeunix.com.> In-Reply-To: <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> References: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> <200712230119.30705.peter.schuller@infidyne.com> <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.3; i386-portbld-freebsd7.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Updating ports X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 02:57:01 -0000 On Sat, 22 Dec 2007 18:47:52 -0600 Paul Schmehl wrote: > --On December 23, 2007 1:19:21 AM +0100 Peter Schuller > wrote: > > > > In particular, given a re-build (e.g. upgraded) port X, all ports > > depending on X will also be re-built regardless of whether that is > > required according to the dependency relation. This is handled in > > such a way that it is not dependent on the entire procedure > > completing in one session, as you are with portupgrade (meaning > > it's restartable, as mentioned above). > > > > I don't understand this statement. I have killed portupgrade on > numerous occasions, both locally and remotely, and have never had a > problem restarting later. Something like portupgrade -fr perl is pretty hard to restart efficiently. > > In practice, I find this is the most useful upgrading method. I have > > never been able to use portupgrade for more than a week or two on a > > real machine without running into issues (stale dependencies, > > failed builds due to weak dependency information, etc). > > > > I *really* don't understand this. I can count on one hand the number > of times that I've run into dependency problems with portupgrade, and > all of those were addressed in /usr/port/UPDATING or by simply > deinstalling and reinstalling the port in question. It was really intended to handle major upgrades where multiple UPDATING instructions run together. And back in the days when Gnome upgrades involved wrapping portupgrade in a shell script run in single-user mode with a 50:50 chance of success, portmanager just took it in its stride. I think it is a useful approach because it trades a lot of cpu cycle for me not having to sober-up and think about things - and that always a win. Unfortunately, it's gone without developer support for too long now and I'm getting a bit wary about it. From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 03:09:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6FFE716A417 for ; Sun, 23 Dec 2007 03:09:49 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: from web57011.mail.re3.yahoo.com (web57011.mail.re3.yahoo.com [66.196.97.115]) by mx1.freebsd.org (Postfix) with SMTP id 3586813C458 for ; Sun, 23 Dec 2007 03:09:49 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: (qmail 89813 invoked by uid 60001); 23 Dec 2007 03:09:48 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=U9ZD8J32nKT39pOY/fnRbLIhkG+URetb/OkmefwT+ZwHNTZ7TL66oey6IxrIYcwGkk61ct5Pf58im5vga7WAKnOJRy8L4Wf4w3KIsbmaIZqfzz+/ixgWNPW+yx7541xlcpoERNucC/MDFsL0CFQa+7RzzpWDwQlADoSqJgYjslE=; X-YMail-OSG: SEWFWhoVM1mZnJMZzwjeIcU8JzMxQRxFgUEQlZ9d.QGObENNcn0oNUQYnZLZBZ13J7Me.1.8RSagfhSRUu4lezB7l4eValDBKlgTr3urBEGRfIdUZX8- Received: from [165.21.154.15] by web57011.mail.re3.yahoo.com via HTTP; Sat, 22 Dec 2007 19:09:47 PST Date: Sat, 22 Dec 2007 19:09:47 -0800 (PST) From: Unga To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <514379.74969.qm@web57011.mail.re3.yahoo.com> Subject: Understand process priority X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 03:09:49 -0000 Hi all $ ps -o pri,ni,rtprio,command -p `pgrep amarok` PRI NI RTPRIO COMMAND 20 0 normal amarokapp 1) Are there are 3 priority values per process, or just one? 2) How should I read above? Is it Priority=20, ie. NI=0, RTPRIO=normal? Does it all mean the same thing, like the bytes=1048576 and KB=1024 and MB=1? 3) The rtprio(1) says "Priority is an integer between 0 and RTP_PRIO_MAX (usually 31). 0 is the highest priority". But when I run following command: $ ps aux -o pri,ni,rtprio,command USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND PRI NI RTPRIO COMMAND root 10 99.2 0.0 0 8 ?? RL 7:40PM 0:00.00 [idle: cpu1] 171 0 idle:25 [idle: cpu1] root 26 0.0 0.0 0 8 ?? WL 7:40PM 0:00.02 [irq18: envy24ht -80 0 intr:4 [irq18: envy24ht test 1212 0.0 9.3 58544 48176 ?? S 8:06PM 0:06.15 amarokapp 20 0 normal amarokapp That is, PID PRI NI RTPRIO 10 171 0 idle:25 26 -80 0 intr:4 1212 20 0 normal This shows priority ranges at least from -80 to 171 contrary to the range mentioned in rtprio(1). Does this means PID=26 has a higher priority than PID=1212? 4) Can a PRI=0 be considered Realtime? 5) What is the meaning of priority=0 in /etc/login.conf? Is it Realtime? 6) What is the value should I set for priority in /etc/login.conf if I want Realtime? Kind Regards Unga ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 03:21:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EC42516A419 for ; Sun, 23 Dec 2007 03:21:31 +0000 (UTC) (envelope-from jbolivar@cantv.net) Received: from rs26s12.datacenter.cha.cantv.net (rs26s12.datacenter.cha.cantv.net [200.44.33.42]) by mx1.freebsd.org (Postfix) with ESMTP id 9A93013C442 for ; Sun, 23 Dec 2007 03:21:31 +0000 (UTC) (envelope-from jbolivar@cantv.net) Received: from [192.168.0.9] (dC9F23F1E.dslam-02-5-20-02-1-01.sag.dsl.cantv.net [201.242.63.30]) by rs26s12.datacenter.cha.cantv.net (8.13.8/8.13.0/3.0) with ESMTP id lBN3LUCu004754 for ; Sat, 22 Dec 2007 22:51:30 -0430 X-Matched-Lists: [] Message-ID: <476DD439.3060405@cantv.net> Date: Sat, 22 Dec 2007 22:51:29 -0430 From: Julian Bolivar User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: User Questions Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV version 0.92, clamav-milter version 0.92 on 10.128.1.88 X-Virus-Status: Clean Subject: FreeBSD 6.3 or 7.0 Release? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 03:21:32 -0000 Hi everyone, Mi question is because checking the FreeBSD 6.3 and 7.0 Release schedule, I note that version 6.3 is upcoming and few days later 7.0 will be releaced, anyone know if this schedule is updated or is in time? or only one of both will be released? Thanks and Regards, ----------------------- Julian Bolivar From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 03:26:12 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 14DC216A418 for ; Sun, 23 Dec 2007 03:26:12 +0000 (UTC) (envelope-from cperciva@freebsd.org) Received: from pd3mo2so.prod.shaw.ca (idcmail-mo1so.shaw.ca [24.71.223.10]) by mx1.freebsd.org (Postfix) with ESMTP id F3F1813C43E for ; Sun, 23 Dec 2007 03:26:11 +0000 (UTC) (envelope-from cperciva@freebsd.org) Received: from pd3mr2so.prod.shaw.ca (pd3mr2so-qfe3.prod.shaw.ca [10.0.141.178]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with ESMTP id <0JTH002RGG7NH080@l-daemon> for freebsd-questions@freebsd.org; Sat, 22 Dec 2007 20:26:11 -0700 (MST) Received: from pn2ml10so.prod.shaw.ca ([10.0.121.80]) by pd3mr2so.prod.shaw.ca (Sun Java System Messaging Server 6.2-7.05 (built Sep 5 2006)) with ESMTP id <0JTH00FA0G7NMD20@pd3mr2so.prod.shaw.ca> for freebsd-questions@freebsd.org; Sat, 22 Dec 2007 20:26:11 -0700 (MST) Received: from hexahedron.daemonology.net ([24.82.201.197]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with SMTP id <0JTH00IYEG7MHSA0@l-daemon> for freebsd-questions@freebsd.org; Sat, 22 Dec 2007 20:26:10 -0700 (MST) Received: (qmail 2546 invoked from network); Sun, 23 Dec 2007 03:26:08 +0000 Received: from unknown (HELO hexahedron.daemonology.net) (127.0.0.1) by localhost with SMTP; Sun, 23 Dec 2007 03:26:08 +0000 Date: Sat, 22 Dec 2007 19:26:07 -0800 From: Colin Percival In-reply-to: <476DD439.3060405@cantv.net> To: Julian Bolivar Message-id: <476DD54F.5030809@freebsd.org> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7bit X-Enigmail-Version: 0.95.5 References: <476DD439.3060405@cantv.net> User-Agent: Thunderbird 2.0.0.9 (X11/20071117) Cc: User Questions Subject: Re: FreeBSD 6.3 or 7.0 Release? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 03:26:12 -0000 Julian Bolivar wrote: > Mi question is because checking the FreeBSD 6.3 and 7.0 Release > schedule, I note that version 6.3 is upcoming and few days later 7.0 > will be releaced, anyone know if this schedule is updated or is in time? > or only one of both will be released? My guess, informed only by knowledge of where things are currently at and how these things usually go, is that we'll see 6.3-RELEASE some time in the first week of January, and 7.0-RELEASE two or three weeks later. Colin Percival From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 03:45:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2DE5B16A419 for ; Sun, 23 Dec 2007 03:45:09 +0000 (UTC) (envelope-from jhall@vandaliamo.net) Received: from trueband.net (director.trueband.net [216.163.120.8]) by mx1.freebsd.org (Postfix) with SMTP id CB4D713C43E for ; Sun, 23 Dec 2007 03:45:08 +0000 (UTC) (envelope-from jhall@vandaliamo.net) Received: (qmail 4506 invoked by uid 1006); 23 Dec 2007 03:45:07 -0000 Received: from jhall@vandaliamo.net by rs0 by uid 1003 with qmail-scanner-1.16 (spamassassin: 3.1.4. Clear:SA:0(-1.4/100.0):. Processed in 0.945508 secs); 23 Dec 2007 03:45:07 -0000 X-Spam-Status: No, hits=-1.4 required=100.0 X-Spam-Level: Received: from unknown (HELO trueband.net) (172.16.0.15) by -v with SMTP; 23 Dec 2007 03:45:06 -0000 Received: (qmail 6292 invoked from network); 23 Dec 2007 03:45:06 -0000 Received: from unknown (HELO admintool.trueband.net) (127.0.0.1) by -v with SMTP; 23 Dec 2007 03:45:06 -0000 Received: from 12.170.206.13 (SquirrelMail authenticated user jhall@vandaliamo.net) by admintool.trueband.net with HTTP; Sun, 23 Dec 2007 03:45:06 -0000 (GMT) Message-ID: <50368.12.170.206.13.1198381506.squirrel@admintool.trueband.net> In-Reply-To: <964986422.20071222105204@bk.ru> References: <51935.12.170.206.13.1198248568.squirrel@admintool.trueband.net> <1044977630.20071221175247@bk.ru> <49254.65.117.48.155.1198256367.squirrel@admintool.trueband.net> <863400045.20071221201413@bk.ru> <49457.65.117.48.155.1198258492.squirrel@admintool.trueband.net> <964986422.20071222105204@bk.ru> Date: Sun, 23 Dec 2007 03:45:06 -0000 (GMT) From: jhall@vandaliamo.net To: "Michael Lednev" User-Agent: SquirrelMail/1.4.4 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: jhall@vandaliamo.net, freebsd-questions@freebsd.org Subject: Re: Redirecting STDOUT X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 03:45:09 -0000 > # command >& file > > this will redirect both STDERR and STDOUT to file > > -- > Best regards, > Michael mailto:liettneff@bk.ru > > Thank you to everyone for their help. I have this working now. Jay From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 05:10:06 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 884AD16A418 for ; Sun, 23 Dec 2007 05:10:06 +0000 (UTC) (envelope-from dan@nyi.unixathome.org) Received: from nyi.unixathome.org (nyi.unixathome.org [64.147.113.42]) by mx1.freebsd.org (Postfix) with ESMTP id 73DDE13C46A for ; Sun, 23 Dec 2007 05:10:06 +0000 (UTC) (envelope-from dan@nyi.unixathome.org) Received: from localhost (localhost [127.0.0.1]) by nyi.unixathome.org (Postfix) with ESMTP id 86C00508CC for ; Sun, 23 Dec 2007 05:10:04 +0000 (GMT) X-Virus-Scanned: amavisd-new at unixathome.org Received: from nyi.unixathome.org ([127.0.0.1]) by localhost (nyi.unixathome.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 482TVM1sdXoV for ; Sun, 23 Dec 2007 05:10:01 +0000 (GMT) Received: by nyi.unixathome.org (Postfix, from userid 1001) id 8F223508C3; Sun, 23 Dec 2007 05:10:01 +0000 (GMT) From: Dan Langille To: freebsd-questions@freebsd.org Message-Id: <20071223051001.8F223508C3@nyi.unixathome.org> Date: Sun, 23 Dec 2007 05:10:01 +0000 (GMT) Subject: The FreeBSD Diary: 2007-12-02 - 2007-12-22 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 05:10:06 -0000 The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives and/or The FreeBSD Diary . These are the articles posted during this period: 17-Dec : PC-BSD PC-BSD has a lot going for it http://freebsddiary.org/pcbsd.php?2 9-Dec : IMAP - getting Dovecot running POP implies one computer. IMAP allows many. http://freebsddiary.org/dovecot.php?2 -- Dan Langille BSDCan - http://www.BSDCan.org/ - BSD Conference From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 07:40:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 28A1C16A418 for ; Sun, 23 Dec 2007 07:40:54 +0000 (UTC) (envelope-from erikt@midgard.homeip.net) Received: from ch-smtp01.sth.basefarm.net (ch-smtp01.sth.basefarm.net [80.76.149.212]) by mx1.freebsd.org (Postfix) with ESMTP id BC02F13C45B for ; Sun, 23 Dec 2007 07:40:53 +0000 (UTC) (envelope-from erikt@midgard.homeip.net) Received: from c83-253-25-183.bredband.comhem.se ([83.253.25.183]:56791 helo=falcon.midgard.homeip.net) by ch-smtp01.sth.basefarm.net with esmtp (Exim 4.68) (envelope-from ) id 1J6LS8-00047L-53 for freebsd-questions@freebsd.org; Sun, 23 Dec 2007 08:40:52 +0100 Received: (qmail 74836 invoked from network); 23 Dec 2007 08:40:47 +0100 Received: from owl.midgard.homeip.net (10.1.5.7) by falcon.midgard.homeip.net with ESMTP; 23 Dec 2007 08:40:47 +0100 Received: (qmail 98194 invoked by uid 1001); 23 Dec 2007 08:40:47 +0100 Date: Sun, 23 Dec 2007 08:40:47 +0100 From: Erik Trulsson To: Unga Message-ID: <20071223074047.GA97604@owl.midgard.homeip.net> Mail-Followup-To: Unga , freebsd-questions@freebsd.org References: <514379.74969.qm@web57011.mail.re3.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <514379.74969.qm@web57011.mail.re3.yahoo.com> User-Agent: Mutt/1.5.16 (2007-06-09) X-Originating-IP: 83.253.25.183 X-Scan-Result: No virus found in message 1J6LS8-00047L-53. X-Scan-Signature: ch-smtp01.sth.basefarm.net 1J6LS8-00047L-53 7d12cbb870fe5fd8f2da0b2c781d7234 Cc: freebsd-questions@freebsd.org Subject: Re: Understand process priority X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 07:40:54 -0000 On Sat, Dec 22, 2007 at 07:09:47PM -0800, Unga wrote: > Hi all > > $ ps -o pri,ni,rtprio,command -p `pgrep amarok` > PRI NI RTPRIO COMMAND > 20 0 normal amarokapp > > 1) Are there are 3 priority values per process, or > just one? There is really only one priority that is used when scheduling processes. The other two fields (nice and rtprio) modifies how the priority is set, but do not directly affect the priority. The actual priority is handled internally in the kernel and cannot be modified directly from userland. It is always the case that if two (or more) processes both want to use the CPU at the same time, then it is the one with the highest priority which gets to use it. (The term 'highest priority' can be slightly confusing, since it is normally the process with the lowest value in the 'PRI' field which has the highest priority.) For those processes that has a real time priority (rtprio) of 'normal', i.e. most normal processes, the priority is adjusted dynamically depending on how long it has waited for CPU, and how much CPU it used the last time it ran, etc. The 'nice' value affects how quickly the priority is adjusted up or down. A high nice value means that the priority will only increase slowly and decrease quickly, while it is the other way around for processes with a low nice value. Note however that even a process with a high nice value will get at least a little CPU time now and then, even if there are processes around that are much less nice that want the CPU too. For processes with a real time priority of something other than 'normal' the priority is not adjusted dynamically. Processes with rtprio=idle always have lower priority than all other processes. Processes with an actual real time priority set will always have higher priority than non-real time processes. > > 2) How should I read above? Is it Priority=20, ie. > NI=0, RTPRIO=normal? It is: Priority=20; Nice=0; Real time priority=normal > Does it all mean the same thing, > like the bytes=1048576 and KB=1024 and MB=1? No. > > 3) The rtprio(1) says "Priority is an integer between > 0 and RTP_PRIO_MAX (usually 31). 0 is the highest > priority". But when I run following command: > > $ ps aux -o pri,ni,rtprio,command > > USER PID %CPU %MEM VSZ RSS TT STAT STARTED > TIME COMMAND PRI NI RTPRIO COMMAND > > root 10 99.2 0.0 0 8 ?? RL 7:40PM > 0:00.00 [idle: cpu1] 171 0 idle:25 [idle: cpu1] > > root 26 0.0 0.0 0 8 ?? WL 7:40PM > 0:00.02 [irq18: envy24ht -80 0 intr:4 [irq18: > envy24ht > > test 1212 0.0 9.3 58544 48176 ?? S 8:06PM > 0:06.15 amarokapp 20 0 normal amarokapp > > That is, > PID PRI NI RTPRIO > 10 171 0 idle:25 > 26 -80 0 intr:4 > 1212 20 0 normal > > This shows priority ranges at least from -80 to 171 > contrary to the range mentioned in rtprio(1). Does > this means PID=26 has a higher priority than PID=1212? rtprio(1) does not set the PRI field directly. It sets the RTPRIO field. In your example these are 'idle:25' 'intr:4' and 'normal' indicating that these are run with idle priority, interrupt priority, and normal priority respectively. (The 'intr' value in the rtprio field can probably only be set directly by the kernel for interrupt threads, and is a bit outside the normal real time priorities.) The actual idel/real time priority value set by rtprio(1)/idprio(1) is not displayed by ps(1), but can be shown by rtprio(1)/idprio(1). Yes, PID=26 has a much higher priority than PID=1212, as it should considering that PID=26 is an interrupt thread, while PID=1212 is just an ordinary, non-real time, process. > > 4) Can a PRI=0 be considered Realtime? No, not really. If a process does not have rtprio set to something other than 'normal' or 'idle' it is not a real time process. > > 5) What is the meaning of priority=0 in > /etc/login.conf? Is it Realtime? No, the 'priority' field in /etc/login.conf sets the nice value. > > 6) What is the value should I set for priority in > /etc/login.conf if I want Realtime? You can't do that. You should also not set any process to a real-time priority unless you know exactly what you are doing and why you are doing it. The normal way of setting the relative priorities of processes on Unix systems is by setting the nice value (and only root is allowed to lower the nice value.) -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 11:03:20 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 81C8F16A420 for ; Sun, 23 Dec 2007 11:03:20 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [IPv6:2001:8b0:151:1::1]) by mx1.freebsd.org (Postfix) with ESMTP id 06A2B13C468 for ; Sun, 23 Dec 2007 11:03:18 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.14.2/8.14.2) with ESMTP id lBNB3Bjr018509; Sun, 23 Dec 2007 11:03:12 GMT (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <476E406F.2040200@infracaninophile.co.uk> Date: Sun, 23 Dec 2007 11:03:11 +0000 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: RW References: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> <200712230119.30705.peter.schuller@infidyne.com> <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> <20071223023853.11ab60e6@gumby.homeunix.com.> In-Reply-To: <20071223023853.11ab60e6@gumby.homeunix.com.> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (smtp.infracaninophile.co.uk [IPv6:::1]); Sun, 23 Dec 2007 11:03:12 +0000 (GMT) X-Virus-Scanned: ClamAV version 0.92, clamav-milter version 0.92 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.0 required=5.0 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on happy-idiot-talk.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: Updating ports X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 11:03:20 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 RW wrote: > Something like > > portupgrade -fr perl > > is pretty hard to restart efficiently. A good trick is to use the date comparison functionality portupgrade provides. So you can do something like: portupgrade -fr perl -x '>=perl' meaning: update everything that depends on perl except any packages installed after perl. That is restartable. When you're doing forced upgrades of everything, as is necessary for example when upgrading from 6.x to 7.0 then instead of doing portupgrade -fa it's better to do: portupgrade -f '<2007-12-23' where 2007-12-23 is the date you did the system update. That command can be restarted without wastefully re-recompiling a bunch of stuff -- although you should avoid updating any ports prior to but on the same day as the system upgrade. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHbkBv8Mjk52CukIwRCI8qAJ4wIIonoNf2QTeNcNvEhVrU+QnKtACeL/m/ T3UifmkMWme9wj9Q4J4ol7E= =you9 -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 13:43:18 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5FEE416A46E for ; Sun, 23 Dec 2007 13:43:18 +0000 (UTC) (envelope-from mbaki@whywire.net) Received: from starfish.geekisp.com (mail.geekisp.com [216.168.135.169]) by mx1.freebsd.org (Postfix) with ESMTP id 01CD613C467 for ; Sun, 23 Dec 2007 13:43:17 +0000 (UTC) (envelope-from mbaki@whywire.net) Received: (qmail 609 invoked by uid 1003); 23 Dec 2007 13:43:53 -0000 Received: from 67.100.188.210 (proxying for 67.100.188.210) (SquirrelMail authenticated user mbaki@whywire.net) by www.geekisp.com with HTTP; Sun, 23 Dec 2007 08:43:13 -0500 (EST) Message-ID: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> Date: Sun, 23 Dec 2007 08:43:13 -0500 (EST) From: "Monah Baki" To: freebsd-questions@freebsd.org User-Agent: SquirrelMail/1.4.14 [SVN] MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Subject: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 13:43:18 -0000 Hi All, I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). Applications that I run on it is MySQL and Apache. I have no problem with server uptime but I am not able to update because once I run the command: make buildkernel KERNCONF=SMP Server crashes here mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm cd /usr/src/sys/modules/aic7xxx/aicasm; MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS all cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c aicasm_gram.c This happens everytime, is there anywhere I can look to see what's going on, or if it's a hardware problem, where is the cause so I can replace. Thanks BSD Networking, Microsoft Notworking From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 14:05:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CB05316A420 for ; Sun, 23 Dec 2007 14:05:03 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from smtp.utwente.nl (unknown [IPv6:2001:610:1908:1000:204:23ff:feb7:ef56]) by mx1.freebsd.org (Postfix) with ESMTP id 1E11C13C478 for ; Sun, 23 Dec 2007 14:05:02 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from lux.student.utwente.nl (lux.student.utwente.nl [130.89.170.81]) by smtp.utwente.nl (8.12.10/SuSE Linux 0.7) with ESMTP id lBNE4o0k006171; Sun, 23 Dec 2007 15:04:51 +0100 From: Pieter de Goeje To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 15:04:50 +0100 User-Agent: KMail/1.9.7 References: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> In-Reply-To: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712231504.50561.pieter@degoeje.nl> X-UTwente-MailScanner-Information: Scanned by MailScanner. Contact helpdesk@ITBE.utwente.nl for more information. X-UTwente-MailScanner: Found to be clean X-UTwente-MailScanner-From: pieter@degoeje.nl X-Spam-Status: No Cc: Monah Baki Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 14:05:03 -0000 On Sunday 23 December 2007, Monah Baki wrote: > Hi All, > > I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). > Applications that I run on it is MySQL and Apache. I have no problem with > server uptime but I am not able to update because once I run the command: > > make buildkernel KERNCONF=SMP > > Server crashes here > > mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symb >ol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c > echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm > cd /usr/src/sys/modules/aic7xxx/aicasm; > MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS > all > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symb >ol.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > aicasm_gram.c > > This happens everytime, is there anywhere I can look to see what's going > on, or if it's a hardware problem, where is the cause so I can replace. If it happens every time at exactly the same point it is probably not a hardware problem. Please include the actual error message and to what sources (RELENG_6? RELENG_7?) you are updating along with uname -a. Pieter de Goeje. From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 14:15:58 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 876BC16A418 for ; Sun, 23 Dec 2007 14:15:58 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from betty.computinginnovations.com (mail.computinginnovations.com [64.81.227.250]) by mx1.freebsd.org (Postfix) with ESMTP id 3689D13C461 for ; Sun, 23 Dec 2007 14:15:58 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from p28.computinginnovations.com (dhcp-10-20-30-100.computinginnovations.com [10.20.30.100]) (authenticated bits=0) by betty.computinginnovations.com (8.13.8/8.13.8) with ESMTP id lBNEFmXi098998; Sun, 23 Dec 2007 08:15:48 -0600 (CST) (envelope-from derek@computinginnovations.com) Message-Id: <6.0.0.22.2.20071223081432.0251ee98@mail.computinginnovations.com> X-Sender: derek@mail.computinginnovations.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 23 Dec 2007 08:15:36 -0600 To: "Monah Baki" , freebsd-questions@freebsd.org From: Derek Ragona In-Reply-To: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> References: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> Mime-Version: 1.0 X-ComputingInnovations-MailScanner-Information: Please contact the ISP for more information X-ComputingInnovations-MailScanner: Found to be clean X-ComputingInnovations-MailScanner-From: derek@computinginnovations.com X-Spam-Status: No Content-Type: text/plain; charset="us-ascii"; format=flowed X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 14:15:58 -0000 At 07:43 AM 12/23/2007, Monah Baki wrote: >Hi All, > >I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). >Applications that I run on it is MySQL and Apache. I have no problem with >server uptime but I am not able to update because once I run the command: > >make buildkernel KERNCONF=SMP > >Server crashes here > >mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. >-I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm >/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c >/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c >aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c >echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm >cd /usr/src/sys/modules/aic7xxx/aicasm; >MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS >all >cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >-I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c >cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >-I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c >cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >-I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >aicasm_gram.c > >This happens everytime, is there anywhere I can look to see what's going >on, or if it's a hardware problem, where is the cause so I can replace. > >Thanks Have you tried pulling down all new sources? You could have a corrupt source file. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 14:41:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C245C16A421 for ; Sun, 23 Dec 2007 14:41:29 +0000 (UTC) (envelope-from ismail@EnderUNIX.org) Received: from istanbul.enderunix.org (freefall.marmara.edu.tr [193.140.143.23]) by mx1.freebsd.org (Postfix) with ESMTP id E401213C4F4 for ; Sun, 23 Dec 2007 14:41:28 +0000 (UTC) (envelope-from ismail@EnderUNIX.org) Received: (qmail 26291 invoked by uid 1040); 23 Dec 2007 14:41:52 -0000 Received: from unknown (HELO ISMAIL) (ismail@127.0.0.1) by 0 with ESMTPA; 23 Dec 2007 14:41:51 -0000 Date: Sun, 23 Dec 2007 16:41:14 +0200 From: Ismail YENIGUL X-Mailer: The Bat! (v3.99.3) Professional Organization: EnderUNIX X-Priority: 3 (Normal) Message-ID: <892749461.20071223164114@EnderUNIX.org> To: "Ivan Voras" In-Reply-To: <9bbcef730712221435o1f1227a1l1ca840e1474aacfb@mail.gmail.com> References: <1605513356.20071219221424@EnderUNIX.org> <879443695.20071222190910@EnderUNIX.org> <9bbcef730712221435o1f1227a1l1ca840e1474aacfb@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-SMTP-Filter: SurGATE SMTP Filter Engine Release 1.0.1 http://www.endersys.com X-SurGATE-Result: Clean (Content eval: -4.40 points) Cc: freebsd-database@freebsd.org, freebsd-questions@freebsd.org Subject: Re[4]: Turkish character sorting on PostgreSQL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Ismail YENIGUL List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 14:41:29 -0000 Hello, I am volunteer for this issue. But, I don't know how to create a locale Can someone give me hints(url, howto etc) about this issue? Thanks in advance. Sunday, December 23, 2007, 12:35:08 AM, you wrote: > On 22/12/2007, Ismail YENIGUL wrote: >> By the way, LC_COLLATE is link to the ../la_LN.US-ASCII/LC_COLLATE >> in /usr/share/locale/tr_TR.ISO8859-9 directory. Does this mean that >> LC_COLLATE is missing for tr_TR.ISO8859-9 ? > Yes. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" --=20 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + http://www.enderunix.org/ismail http://www.endersys.com.tr + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + ismail ~ enderunix.org ismail.yenigul ~ endersys.com.tr + + Volunteer, Core Team Member Project Manager + +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ TCP/IP ve A=C4=9F g=C3=BCvenli=C4=9Fi kitab=C4=B1n=C4=B1n 2. bask=C4=B1s=C4= =B1 =C3=A7=C4=B1kt=C4=B1! http://dukkan.acikakademi.com From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 15:49:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D354016A419 for ; Sun, 23 Dec 2007 15:49:11 +0000 (UTC) (envelope-from mbaki@whywire.net) Received: from starfish.geekisp.com (mail.geekisp.com [216.168.135.169]) by mx1.freebsd.org (Postfix) with ESMTP id 818DB13C44B for ; Sun, 23 Dec 2007 15:49:11 +0000 (UTC) (envelope-from mbaki@whywire.net) Received: (qmail 27068 invoked by uid 1003); 23 Dec 2007 15:49:43 -0000 Received: from 67.100.188.210 (proxying for 67.100.188.210) (SquirrelMail authenticated user mbaki@whywire.net) by www.geekisp.com with HTTP; Sun, 23 Dec 2007 10:49:03 -0500 (EST) Message-ID: <5616.67.100.188.210.1198424943.squirrel@www.geekisp.com> In-Reply-To: <200712231504.50561.pieter@degoeje.nl> References: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> <200712231504.50561.pieter@degoeje.nl> Date: Sun, 23 Dec 2007 10:49:03 -0500 (EST) From: "Monah Baki" To: "Pieter de Goeje" User-Agent: SquirrelMail/1.4.14 [SVN] MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: freebsd-questions@freebsd.org Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 15:49:11 -0000 Hello, Thing is no error pops up on screen during the make buildinstall, computer just freezes and I have to reboot. Isn't there any command that might help figuring if any hardware is acting flaky? uname -a storm.whywire.com 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0: Wed Oct 31 08:02:11 EDT 2007 mbaki@storm.whywire.com:/usr/obj/usr/src/sys/GENERIC i386 and from the stable-supfile Trying to upgrade source tag=RELENG_6 storm# dmesg | more Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-PRERELEASE #0: Wed Oct 31 08:02:11 EDT 2007 mbaki@storm.whywire.com:/usr/obj/usr/src/sys/GENERIC MPTable: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (596.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387fbff real memory = 1073741824 (1024 MB) avail memory = 1041743872 (993 MB) ioapic0: Assuming intbase of 0 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 agp0: mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0xffa0-0xffaf at device 7.1 on pci0 ata0: on atapci0 ata1: on atapci0 uhci0: port 0xef80-0xef9f at device 7. 2 on pci0 uhci0: Could not allocate irq device_attach: uhci0 attach returned 6 pci0: at device 7.3 (no driver attached) fxp0: port 0xef00-0xef3f mem 0xfebff000-0xfebffff f,0xfea00000-0xfeafffff irq 10 at device 17.0 on pci0 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:a8:00:66:aa fxp1: port 0xee80-0xeebf mem 0xfebfe000-0xfebfeff f,0xfe800000-0xfe8fffff irq 5 at device 18.0 on pci0 miibus1: on fxp1 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:d0:a8:00:66:ab pcib2: at device 20.0 on pci0 pci2: on pcib2 ahc0: port 0xd800-0xd8ff mem 0xfe2ff000-0xfe2 fffff irq 11 at device 15.0 on pci2 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs pmtimer0 on isa0 orm0: at iomem 0xc9800-0xcefff,0xcf000-0xd8fff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) Timecounter "TSC" frequency 595997921 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDROM at ata1-slave PIO4 (probe0:ahc0:0:0:1): AutoSense Failed (probe0:ahc0:0:0:2): AutoSense Failed (probe0:ahc0:0:0:3): AutoSense Failed (probe0:ahc0:0:0:4): AutoSense Failed (probe0:ahc0:0:0:5): AutoSense Failed (probe0:ahc0:0:0:6): AutoSense Failed (probe0:ahc0:0:0:7): AutoSense Failed da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C) Trying to mount root from ufs:/dev/da0s1a > On Sunday 23 December 2007, Monah Baki wrote: >> Hi All, >> >> I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). >> Applications that I run on it is MySQL and Apache. I have no problem >> with >> server uptime but I am not able to update because once I run the >> command: >> >> make buildkernel KERNCONF=SMP >> >> Server crashes here >> >> mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. >> -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm >> /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c >> /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symb >>ol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c >> echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm >> cd /usr/src/sys/modules/aic7xxx/aicasm; >> MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS >> all >> cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >> -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >> /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c >> cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >> -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >> /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symb >>ol.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. >> -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c >> aicasm_gram.c >> >> This happens everytime, is there anywhere I can look to see what's going >> on, or if it's a hardware problem, where is the cause so I can replace. > > If it happens every time at exactly the same point it is probably not a > hardware problem. > > Please include the actual error message and to what sources (RELENG_6? > RELENG_7?) you are updating along with uname -a. > > Pieter de Goeje. > BSD Networking, Microsoft Notworking From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 17:01:04 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 27CB516A41B for ; Sun, 23 Dec 2007 17:01:04 +0000 (UTC) (envelope-from SRS0=/4QvhO8c=RO=asarian-host.net=admin@asarian-host.net) Received: from mail.asarian-host.net (mail.asarian-host.net [194.109.160.70]) by mx1.freebsd.org (Postfix) with ESMTP id 8F59013C44B for ; Sun, 23 Dec 2007 17:01:03 +0000 (UTC) (envelope-from SRS0=/4QvhO8c=RO=asarian-host.net=admin@asarian-host.net) Received: from anonymizer.asarian-host.net (localhost [127.0.0.1]) (authenticated bits=0) by mail.asarian-host.net (8.14.2/8.14.2) with ESMTP id lBNH11bY005450 for ; Sun, 23 Dec 2007 18:01:01 +0100 (CET) (envelope-from admin@asarian-host.net) DomainKey-Signature: q=dns; a=rsa-sha1; h=from:received-spf:message-id:date:subject:x-trace:organization:to:mime-version:content-type; q=dns; c=nofws; s=anon; d=asarian-host.net; b=kkhojEyh9+6C8+7MtsMv9VpqldIO0q2NU8H2Y5TvvkEpJWvvnkzZIvtWv13b5mLUtKslbtboyaRfCT/zLUhTMW5LoJmk1sxWdlw/6bUS8+dsaUYQKigm/ayDpTG24tOucblWejQvUz1yPX9VnZkJk8InMiOBbEKirU9AnL1OcLs= From: Mark Received-SPF: pass (asarian-host.net: 127.0.0.1 is authenticated by a trusted mechanism) receiver=anonymizer.asarian-host.net; client-ip=127.0.0.1; envelope-from=; helo=clientrunner.asarian-host.net; Message-Id: <200712231701.lBNGV12E004727@asarian-host.net> Date: Sun, 23 Dec 2007 17:01:00 GMT X-Trace: A/qylPPxY2ZOnukaggwZo8DDFtfyVu/QuXNloyMuQk4= X-Complaints-To: abuse@asarian-host.net X-Abuse-Info: Please be sure to forward a copy of ALL headers, otherwise we are unable to process your complaint X-Virus-Checked: Checked by ClamAV on asarian-host.net Organization: Asarian-host To: MIME-Version: 1.0 Content-Language: nl Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: New disk woes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 17:01:04 -0000 On an older 4.11 FreeBSD system I need to replace a disk. Matthew Seaman once explained how: http://lists.freebsd.org/pipermail/freebsd-questions/2003-July/011733.html For one, he said to start with: fdisk -I ad4 But when I re-do that, it says: "No such file or directory" And, indeed, I have: crw-r----- 2 root operator 116, 0x00020022 May 19 2004 /dev/ad4s1 crw-r----- 2 root operator 116, 0x00020020 May 19 2004 /dev/ad4s1a crw-r----- 2 root operator 116, 0x00020021 May 19 2004 /dev/ad4s1b crw-r----- 2 root operator 116, 0x00020022 May 19 2004 /dev/ad4s1c crw-r----- 2 root operator 116, 0x00020023 May 19 2004 /dev/ad4s1d crw-r----- 2 root operator 116, 0x00020024 May 19 2004 /dev/ad4s1e crw-r----- 2 root operator 116, 0x00020025 May 19 2004 /dev/ad4s1f crw-r----- 2 root operator 116, 0x00020026 May 19 2004 /dev/ad4s1g crw-r----- 2 root operator 116, 0x00020027 May 19 2004 /dev/ad4s1h But no ad4, it seems. How quaint! So, is there a way to recreate it? The backup disk is failing, and I need to have it replaced soon. Thanks, - Mark From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 17:40:04 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 18E4316A418 for ; Sun, 23 Dec 2007 17:40:04 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp.infracaninophile.co.uk [IPv6:2001:8b0:151:1::1]) by mx1.freebsd.org (Postfix) with ESMTP id 734C913C457 for ; Sun, 23 Dec 2007 17:40:03 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.14.2/8.14.2) with ESMTP id lBNHdM8u079719; Sun, 23 Dec 2007 17:39:23 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: Sendmail DKIM Filter v2.4.1 smtp.infracaninophile.co.uk lBNHdM8u079719 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=infracaninophile.co.uk; s=200708; t=1198431563; bh=DXX32vk7mZ+LT/ B/Rebt7gNgXQ1RZ47VCuX+h1q/vQ8=; h=Message-ID:Date:From:Organization: User-Agent:MIME-Version:To:CC:Subject:References:In-Reply-To: X-Enigmail-Version:Content-Type:Content-Transfer-Encoding:Cc: Content-Type:Date:From:In-Reply-To:Message-ID:Mime-Version: References:To; z=Message-ID:=20<476E9D4A.5050301@infracaninophile. co.uk>|Date:=20Sun,=2023=20Dec=202007=2017:39:22=20+0000|From:=20Ma tthew=20Seaman=20|Organization:=20 Infracaninophile|User-Agent:=20Thunderbird=202.0.0.9=20(X11/2007112 2)|MIME-Version:=201.0|To:=20Mark=20|CC:=20 questions@freebsd.org|Subject:=20Re:=20New=20disk=20woes|References :=20<200712231701.lBNGV12E004727@asarian-host.net>|In-Reply-To:=20< 200712231701.lBNGV12E004727@asarian-host.net>|X-Enigmail-Version:=2 00.95.0|Content-Type:=20text/plain=3B=20charset=3DISO-8859-1|Conten t-Transfer-Encoding:=207bit; b=Z9y8+4g+h3lagU2V2YmAKMWSbHGqhWk8w93H /Ynodkle+29derp1i4jVPtaymmHGM+D2p8Q/R6/YoeXNWhS32YoO0cAuffRSaToUzh1 hVdJdrn5N2Y19jAmWmp/hmf5+4AMVUE5TZTDDls4/XPbCvAPuGl1mPsdgRH6JVcn82+ M= Message-ID: <476E9D4A.5050301@infracaninophile.co.uk> Date: Sun, 23 Dec 2007 17:39:22 +0000 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: Mark References: <200712231701.lBNGV12E004727@asarian-host.net> In-Reply-To: <200712231701.lBNGV12E004727@asarian-host.net> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (smtp.infracaninophile.co.uk [IPv6:::1]); Sun, 23 Dec 2007 17:39:23 +0000 (GMT) X-Virus-Scanned: ClamAV version 0.92, clamav-milter version 0.92 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.0 required=5.0 tests=AWL,BAYES_00,DKIM_SIGNED, DKIM_VERIFIED,NO_RELAYS autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on happy-idiot-talk.infracaninophile.co.uk Cc: questions@freebsd.org Subject: Re: New disk woes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 17:40:04 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Mark wrote: > On an older 4.11 FreeBSD system I need to replace a disk. [...] > But no ad4, it seems. How quaint! So, is there a way to recreate it? The > > backup disk is failing, and I need to have it replaced soon. /dev/MAKEDEV ad4 I believe will recreate the device for you, although ICBW as I haven't had much to do with any 4.x systems for quite some time, and what with the dynamic /dev/ stuff nowadays, those neurons are beeing fairly rapidly recycled. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHbp1K8Mjk52CukIwRCHXrAJ91QGqUByLtFx8L/CUF9Iri361JagCeLat1 jV25qTgBU4k3zLhSacCU4hY= =yQr4 -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 17:42:32 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0270416A419 for ; Sun, 23 Dec 2007 17:42:32 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: from web57001.mail.re3.yahoo.com (web57001.mail.re3.yahoo.com [66.196.97.105]) by mx1.freebsd.org (Postfix) with SMTP id C9CAE13C442 for ; Sun, 23 Dec 2007 17:42:31 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: (qmail 29308 invoked by uid 60001); 23 Dec 2007 17:42:31 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=OgbcNeFUSDwA/2DtYuKOen915roHzqeKWsIQ3alezf6y7bJPWu99ScJ3Aacq+2gNwKFZUh98txqS3efJZ42jxIXhV6Zx7w6pVO+xeKju17I7f8WYrgahNA5xF6qK/HC53iOQBlFOdzMcaaXCVeELkEFNBm1TDM1GXbb3KhSeCq4=; X-YMail-OSG: LWj5R8cVM1loT49.wCYfDp5bFz4G4xcJrllkfP.rbob6M96iiGY73_RwZR1Aa5b_4qNAcMmJMoxTbHiEseQS9oiWHuD85ItUaFB_gtyct3kxuSwCyme_Cy7nH1Lk2ZU2xc2BdJuzV0n6yDiiWGcVYwzKSg-- Received: from [165.21.155.76] by web57001.mail.re3.yahoo.com via HTTP; Sun, 23 Dec 2007 09:42:30 PST Date: Sun, 23 Dec 2007 09:42:30 -0800 (PST) From: Unga To: Erik Trulsson In-Reply-To: <20071223074047.GA97604@owl.midgard.homeip.net> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <952494.17060.qm@web57001.mail.re3.yahoo.com> Cc: freebsd-questions@freebsd.org Subject: Re: Understand process priority X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 17:42:32 -0000 --- Erik Trulsson wrote: > On Sat, Dec 22, 2007 at 07:09:47PM -0800, Unga > wrote: > > Hi all > > > > $ ps -o pri,ni,rtprio,command -p `pgrep amarok` > > PRI NI RTPRIO COMMAND > > 20 0 normal amarokapp > > > > 1) Are there are 3 priority values per process, or > > just one? > > There is really only one priority that is used when > scheduling > processes. The other two fields (nice and rtprio) > modifies how > the priority is set, but do not directly affect the > priority. > > The actual priority is handled internally in the > kernel and cannot > be modified directly from userland. > > > It is always the case that if two (or more) > processes both want > to use the CPU at the same time, then it is the one > with the highest > priority which gets to use it. > > (The term 'highest priority' can be slightly > confusing, since it is normally > the process with the lowest value in the 'PRI' > field which has the highest > priority.) > > For those processes that has a real time priority > (rtprio) of 'normal', > i.e. most normal processes, the priority is adjusted > dynamically > depending on how long it has waited for CPU, and how > much CPU it used the > last time it ran, etc. The 'nice' value affects how > quickly the priority > is adjusted up or down. A high nice value means > that the priority will > only increase slowly and decrease quickly, while it > is the other way around > for processes with a low nice value. > Note however that even a process with a high nice > value will get at least a > little CPU time now and then, even if there are > processes around that are > much less nice that want the CPU too. > > > For processes with a real time priority of something > other than 'normal' the > priority is not adjusted dynamically. > Processes with rtprio=idle always have lower > priority than all other > processes. > Processes with an actual real time priority set will > always have higher > priority than non-real time processes. > > > > > > > 2) How should I read above? Is it Priority=20, ie. > > NI=0, RTPRIO=normal? > > It is: Priority=20; Nice=0; Real time > priority=normal > > > > Does it all mean the same thing, > > like the bytes=1048576 and KB=1024 and MB=1? > > No. > > > > > 3) The rtprio(1) says "Priority is an integer > between > > 0 and RTP_PRIO_MAX (usually 31). 0 is the highest > > priority". But when I run following command: > > > > $ ps aux -o pri,ni,rtprio,command > > > > USER PID %CPU %MEM VSZ RSS TT STAT > STARTED > > TIME COMMAND PRI NI RTPRIO COMMAND > > > > root 10 99.2 0.0 0 8 ?? RL > 7:40PM > > 0:00.00 [idle: cpu1] 171 0 idle:25 [idle: > cpu1] > > > > root 26 0.0 0.0 0 8 ?? WL > 7:40PM > > 0:00.02 [irq18: envy24ht -80 0 intr:4 [irq18: > > envy24ht > > > > test 1212 0.0 9.3 58544 48176 ?? S 8:06PM > > > 0:06.15 amarokapp 20 0 normal amarokapp > > > > That is, > > PID PRI NI RTPRIO > > 10 171 0 idle:25 > > 26 -80 0 intr:4 > > 1212 20 0 normal > > > > This shows priority ranges at least from -80 to > 171 > > contrary to the range mentioned in rtprio(1). Does > > this means PID=26 has a higher priority than > PID=1212? > > rtprio(1) does not set the PRI field directly. It > sets the RTPRIO > field. In your example these are 'idle:25' 'intr:4' > and 'normal' > indicating that these are run with idle priority, > interrupt priority, > and normal priority respectively. (The 'intr' value > in the rtprio field > can probably only be set directly by the kernel for > interrupt threads, and > is a bit outside the normal real time priorities.) > > The actual idel/real time priority value set by > rtprio(1)/idprio(1) is not > displayed by ps(1), but can be shown by > rtprio(1)/idprio(1). > > > Yes, PID=26 has a much higher priority than > PID=1212, as it should > considering that PID=26 is an interrupt thread, > while PID=1212 is just > an ordinary, non-real time, process. > > > > > > 4) Can a PRI=0 be considered Realtime? > > No, not really. If a process does not have rtprio > set to something > other than 'normal' or 'idle' it is not a real time > process. > > > > > 5) What is the meaning of priority=0 in > > /etc/login.conf? Is it Realtime? > > No, the 'priority' field in /etc/login.conf sets the > nice value. > > > > > 6) What is the value should I set for priority in > > /etc/login.conf if I want Realtime? > > You can't do that. > > You should also not set any process to a real-time > priority unless > you know exactly what you are doing and why you are > doing it. > > The normal way of setting the relative priorities of > processes on Unix > systems is by setting the nice value (and only root > is allowed to lower the > nice value.) > > Thanks for the detailed explanation. Following is from /usr/include/sys/priority.h: /* * Priorities range from 0 to 255, but differences of less then 4 (RQ_PPQ) * are insignificant. Ranges are as follows: * * Interrupt threads: 0 - 63 * Top half kernel threads: 64 - 127 * Realtime user threads: 128 - 159 * Time sharing user threads: 160 - 223 * Idle user threads: 224 - 255 * * XXX If/When the specific interrupt thread and top half thread ranges * disappear, a larger range can be used for user processes. */ ps aux -o pri,ni,rtprio,command shows following: USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND PRI NI RTPRIO COMMAND root 12 91.0 0.0 0 8 ?? RL 9:50AM 830:41.81 [idle: cpu0] 171 0 idle:25 [idle: cpu0] root 13 0.0 0.0 0 8 ?? WL 9:50AM 3:28.96 [swi4: clock sio -32 0 intr:52 [swi4: clock sio root 696 0.0 0.1 3240 764 ?? Is 9:51AM 0:00.06 /usr/sbin/moused 96 0 normal /usr/sbin/moused 1. Can I further understand how to interpret above numbers? 1a) 171 0 idle:25 What is 171? Has is upgraded to “Time sharing user threads” range to be executed? What is idle:25? Is it its default priority 224+25=249? 1b) -32 0 intr:52 What is -32? What is 52? Is it its default priority 52 in the “Interrupt threads” range? 1c) 96 0 normal The “normal” is what? Is it priority 160 or 223? 2. What is the value range can be specified for priority in /etc/login.conf? Regards Unga ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 18:01:03 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 64B1B16A418 for ; Sun, 23 Dec 2007 18:01:03 +0000 (UTC) (envelope-from SRS0=/4QvhO8c=RO=asarian-host.net=admin@asarian-host.net) Received: from mail.asarian-host.net (mail.asarian-host.net [194.109.160.70]) by mx1.freebsd.org (Postfix) with ESMTP id 0455013C448 for ; Sun, 23 Dec 2007 18:01:02 +0000 (UTC) (envelope-from SRS0=/4QvhO8c=RO=asarian-host.net=admin@asarian-host.net) Received: from anonymizer.asarian-host.net (localhost [127.0.0.1]) (authenticated bits=0) by mail.asarian-host.net (8.14.2/8.14.2) with ESMTP id lBNI11fe007089 for ; Sun, 23 Dec 2007 19:01:01 +0100 (CET) (envelope-from admin@asarian-host.net) DomainKey-Signature: q=dns; a=rsa-sha1; h=from:received-spf:message-id:date:x-authenticated-sender:subject:x-trace:organization:to:references:in-reply-to:mime-version:content-type:content-transfer-encoding; q=dns; c=nofws; s=anon; d=asarian-host.net; b=Sz9Equ9hqMxISDcQewlb8wRXDWTIlgyVjdd4qICS5gX6LHLmCut8aXFbwAh0AMTAkXW6RPndCyaJn2WzPk2QlCEtKd/VUhIowbxFBv9TDg/YBbbl90q3fltVCzaOFAznFzNSJlBdaHa8B5qEwMiPc/WI+Hn/4TNbJvyk5gsfLUg= From: Mark Received-SPF: pass (asarian-host.net: 127.0.0.1 is authenticated by a trusted mechanism) receiver=anonymizer.asarian-host.net; client-ip=127.0.0.1; envelope-from=; helo=clientrunner.asarian-host.net; Message-Id: <200712231801.lBNI1013007066@asarian-host.net> Date: Sun, 23 Dec 2007 18:01:01 GMT X-Authenticated-Sender: admin@asarian-host.net X-Trace: 260DBccJoPh0Kzb8ktvnj2uW9OVIw/5XutG3ZI7L2x+8AZZEZavxxDKuaSPTz+7Z X-Complaints-To: abuse@asarian-host.net X-Abuse-Info: Please be sure to forward a copy of ALL headers, otherwise we are unable to process your complaint X-Virus-Checked: Checked by ClamAV on asarian-host.net Organization: Asarian-host To: References: <200712231701.lBNGV12E004727@asarian-host.net> <476E9D4A.5050301@infracaninophile.co.uk> In-Reply-To: <476E9D4A.5050301@infracaninophile.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Language: nl Cc: Subject: RE: New disk woes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 18:01:03 -0000 -----Original Message----- From: Matthew Seaman [mailto:m.seaman@infracaninophile.co.uk] Sent: zondag 23 december 2007 18:40 To: Mark Cc: questions@freebsd.org Subject: Re: New disk woes > > But no ad4, it seems. How quaint! So, is there a way to recreate it? > > The > > > backup disk is failing, and I need to have it replaced soon. > /dev/MAKEDEV ad4 > I believe will recreate the device for you, although ICBW as I haven't > had much to do with any 4.x systems for quite some time, and what with > the dynamic /dev/ stuff nowadays, those neurons are beeing fairly > rapidly recycled. Oops! Yes, the ol' /dev/MAKEDEV script. Panic has a way of wiping one's memory. :) Thanks anyway! - Mark From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 18:24:28 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0F25A16A417 for ; Sun, 23 Dec 2007 18:24:28 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from bene1.itea.ntnu.no (bene1.itea.ntnu.no [IPv6:2001:700:300:3::56]) by mx1.freebsd.org (Postfix) with ESMTP id 619BC13C45B for ; Sun, 23 Dec 2007 18:24:27 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from localhost (localhost [127.0.0.1]) by bene1.itea.ntnu.no (Postfix) with ESMTP id 2B7AC3C47E for ; Sun, 23 Dec 2007 19:24:25 +0100 (CET) Received: from maren.thelosingend.net (maren.math.ntnu.no [129.241.211.48]) by bene1.itea.ntnu.no (Postfix) with SMTP id 9FFBC3C45B for ; Sun, 23 Dec 2007 19:24:19 +0100 (CET) Received: (qmail 68367 invoked by uid 88); 23 Dec 2007 19:24:19 +0100 Received: from maren.math.ntnu.no (HELO weld.ej2.thelosingend.net) (129.241.211.48) by maren.thelosingend.net (qpsmtpd/0.31.1) with ESMTP; Sun, 23 Dec 2007 19:24:19 +0100 Message-ID: <476EA7CE.9040705@lvor.halvorsen.cc> Date: Sun, 23 Dec 2007 19:24:14 +0100 From: Svein Halvor Halvorsen User-Agent: Thunderbird 2.0.0.9 (X11/20071209) MIME-Version: 1.0 To: questions@freebsd.org X-Enigmail-Version: 0.95.0 OpenPGP: id=9198BB40; url=mailto:pgpkey@svein.halvorsen.cc Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Virus-Scanned: Debian amavisd-new at bene1.itea.ntnu.no Cc: Subject: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 18:24:28 -0000 I'm switching to UTF-8, and everything seems to work flawlessly, except for Opera. If I type one of the norwegian letters æøå into a text input box all I get is a square box. If I type backspace over it, it gets converted to a questionmark on the first stroke of backspace, and deleted on the second. If I copy the square box into another program, the propper letter is paced. Svein Halvor From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 18:53:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4EEC616A417 for ; Sun, 23 Dec 2007 18:53:15 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from smtp.utwente.nl (unknown [IPv6:2001:610:1908:1000:204:23ff:feb5:7e66]) by mx1.freebsd.org (Postfix) with ESMTP id 9A03913C4CC for ; Sun, 23 Dec 2007 18:53:14 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from lux.student.utwente.nl (lux.student.utwente.nl [130.89.170.81]) by smtp.utwente.nl (8.12.10/SuSE Linux 0.7) with ESMTP id lBNIr4fr009984; Sun, 23 Dec 2007 19:53:05 +0100 From: Pieter de Goeje To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 19:53:04 +0100 User-Agent: KMail/1.9.7 References: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> <200712231504.50561.pieter@degoeje.nl> <5616.67.100.188.210.1198424943.squirrel@www.geekisp.com> In-Reply-To: <5616.67.100.188.210.1198424943.squirrel@www.geekisp.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712231953.04320.pieter@degoeje.nl> X-UTwente-MailScanner-Information: Scanned by MailScanner. Contact helpdesk@ITBE.utwente.nl for more information. X-UTwente-MailScanner: Found to be clean X-UTwente-MailScanner-From: pieter@degoeje.nl X-Spam-Status: No Cc: Monah Baki Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 18:53:15 -0000 On Sunday 23 December 2007, Monah Baki wrote: > Hello, > > > Thing is no error pops up on screen during the make buildinstall, computer > just freezes and I have to reboot. Can you still ping your computer? Also, if you're on the first terminal (not in X) do you see any messages while or before your computer freezes? > > Isn't there any command that might help figuring if any hardware is acting > flaky? You could try to run memtest86 (http://www.memtest.org/). It will detect memory errors. > > > uname -a > > storm.whywire.com 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0: Wed Oct 31 > 08:02:11 EDT 2007 mbaki@storm.whywire.com:/usr/obj/usr/src/sys/GENERIC > i386 From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 20:14:12 2007 Return-Path: Delivered-To: FreeBSD-Questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 28FA016A419 for ; Sun, 23 Dec 2007 20:14:12 +0000 (UTC) (envelope-from WD@US-Webmasters.com) Received: from server1.grabweb.com (split.grabweb.net [67.15.22.16]) by mx1.freebsd.org (Postfix) with ESMTP id D95DC13C442 for ; Sun, 23 Dec 2007 20:14:11 +0000 (UTC) (envelope-from WD@US-Webmasters.com) Received: (qmail 23167 invoked from network); 23 Dec 2007 14:14:08 -0600 Received: from batv-01-192.dsl.netins.net (HELO Sabrina.US-Webmasters.com) (207.199.193.192) by uswdns.net with (DHE-RSA-AES256-SHA encrypted) SMTP; 23 Dec 2007 14:14:08 -0600 X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Sun, 23 Dec 2007 14:13:51 -0600 To: FreeBSD-Questions@FreeBSD.org From: "W. D." Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <20071223201411.D95DC13C442@mx1.freebsd.org> Cc: trashy_bumper@yahoo.com Subject: Fwd: Re: IPFW: Blocking me out. How to debug? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 20:14:12 -0000 >Date: Sun, 23 Dec 2007 06:04:02 -0800 (PST) >From: Nash Nipples >To: freebsd-security@freebsd.org >Subject: Re: IPFW: Blocking me out. How to debug? > >Dear W.D. > >oh come on. i have the same problem.=20 Which problem are we talking about? >cut and paste logic: > >#!/bin/sh >#1. count packets >#2. allow everything on lo0 (loopback) >#3. slow down and deny packets to buffer overflow enabled daemons >#3.5 to list all the buffer overflow enabled daemons use this sockstat= -46ul >#4. allow everything in and out on the Ethernet interface fxp0.=20 >Remember - wires are long things! What does this mean? >#5. switch sshd to a different port like 55 and use keys to authenticate=20 >#6. do ipfw show every morning Why? >#7. do ipfw zero every evening or as often as your boss wants that How about a cron job that sends out a report then zero's ipfw? >#8. learn how to modify this script quickly just to plumb all the=20 >other things that leak What other things? =20 >#9. you cant block yourself out if you run this script with a trailing=20 >'&' e.g. sh /etc/ipfw.rules & Hmmm. I'll have to try that. Would something like this=20 work to reload the rules? ipfw disable firewall; sh /etc/ipfw.rules & >#TODO: write a program that sends bills to customers >#BUGS: it cant smile > >cmd=3D"/sbin/ipfw" >ext1=3D"fxp0" >gentleports=3D"21,25,514" Why are these ports "gentle"? > >#accounting >#i need these figures to see how bad things are going >$cmd 100 count ip from any to any in via lo0 >$cmd 110 count ip from any to any out via lo0 >$cmd 120 count ip from any to any in via $ext1 > > > >$cmd 130 count ip from any to any out via $ext1 > >#if counters below grow too high u are screwed How so? > #this counter should not vary much comparing to the next one >$cmd 210 count icmp from any to any out via $ext1=20 > #if there is an obvious difference someone's digging holes in the yard What does this mean? > $cmd 220 count icmp from any to any in via $ext1 =20 > #too much of dns. >$cmd 230 count ip from any to any 53 out via $ext1 >$cmd 240 count ip from any to any 53 in via $ext1 Why too much? > >#if counters below grow too high you have screwed someone else Who? Why? >#oh yes. someone's got mail. >$cmd 300 count ip from any to any 25 out via $ext1 >#which way did it go >$cmd 310 count ip from any to any 25 via lo0 > >#policy >$cmd 1000 allow all from any to any via lo0 >/sbin/ipfw add 1110 pipe 1 ip from any to me $gentleports in via $ext1 >/sbin/ipfw pipe 1 config bw 1Kbit/s queue 1Kbytes > >$cmd 1120 deny ip from any to me $gentleports in via $ext1 >$cmd 1130 allow all from any to any via ext1 >#you will wonder but the next rule still has a match >$cmd 1140 deny log all from any to any What is it? > >I'm sorry but i cant draw pretty pictures to make it any more obvious To make what more obvious? =20 > >Nash > > >----- Original Message ---- >From: W. D. >To: FreeBSD-Security@FreeBSD.org >Cc: Ian Smith >Sent: Friday, December 21, 2007 9:30:11 AM >Subject: Re: IPFW: Blocking me out. How to debug? > > >At 05:45 12/20/2007, Ian Smith, wrote: > >Thanks for your reply Ian. This is the kind of=20 >information I am looking for. > > >>Firstly, this really belongs over on freebsd-net@ if not=20 >>freebsd-questions@, but anyway .. > >I'll be glad to move it there if you would like. I >figured that since IPFW/Firewalls are security >related, that FreeBSD-Security would be the most >appropriate place. > > >>On Thu, 20 Dec 2007, W. D. wrote: >> >> > At 03:49 12/17/2007, Tuomo Latto wrote: >> > >W. D. wrote: >> > >> How do I tell which rule is blocking me out? SSH *is* working, >> > >> but others are not. >> > > >> > >It all depends on what you mean by "blocking you out" and > "others". >> >>True; it's not really clear what you're trying to do, whether this is > a >>single server with a single net interface with no NAT or what, but > based >>on your present rules I'll have to make that assumption. > >OK, sorry. I guess I just assumed that it would be obvious=20 >that this is a Web server. ("Never assume anything, my good=20 >fellow" - Sherlock Holmes). =20 > >By the way, it is/will be running Plesk server management >software, if it matters: >http://www.swsoft.com/en/products/plesk/reqs/ > >Also, this server is on an internal LAN before I subject >it to the wild, untamed, InterWeb, with its dangerous >internets darting back and forth inside all of the tubes. > > >> > >> # Loopback: >> > >> # Allow anything on the local loopback: >> > >> add allow all from any to any via lo0 >> > >> add deny ip from any to 127.0.0.0/8 >> > >> add deny ip from 127.0.0.0/8 to any >> >>Meaning, these rules are ok and not the problem. Ignore Mr. Nipples. > >With a name like that, it's hard to take him seriously. ;^) > > >> >> > >> # Allow established connections: >> > >> add allow tcp from any to any established >> >>That's ok. It may help you in debugging what's happening to use: >> >> allow [log] tcp from any to any in established >> allow [log] tcp from any to any out established > >I assume here that "[log]" means to insert "log" for >debugging like this: > > allow log tcp from any to any in established > allow log tcp from any to any out established > =20 >rather than including the square brackets, "[" & "]", >correct? > >I have done that and have included my latest ruleset >below. > > > >>and really, using 'any to any' without specifying on which interfaces > or >>whether 'any' is your box or the outside world is a bit too general, > but >>moving on ..=20 > >OK. What should I do? I only plan on having one >Ethernet interface. What would be more secure? > > > >> > >> # Deny fragmented packets: >> > >> add deny ip from any to any frag > >> > >> # Show pings: >> > >> add count icmp from any to any icmptypes 8 in >> > > >> >>That's inbound ping requests. Don't forget that 'inbound' means > coming >>into the firewall, not necessarily from the outside world. Your own >>ping requests _from_ this box also have to both come in, and go out.=20 > >Hmmm. OK. Outbound Ping will be rarely used, but should >be allowed. Isn't that included in the next rule? > > >> > >> # Allow pings, ping replies, and host unreach: >> > >> add allow icmp from any to any icmptypes 0,8,3 >> > > >> >>Add icmptype 11 as well if you want traceroutes to work .. >> >> > >> # Allow UDP traceroutes: >> > >> add allow udp from any to any 33434-34458 in >> > >> add allow udp from any 33434-34458 to any out >> > > >> >>Ok, though udp rules are often better done statefully. See below. >> >> > >> # Allow DNS with name server >> > >> add allow udp from any to any domain out >> > >> add allow udp from any domain to any in >> > >Nope. >> >>You want to watch out here. This allows udp packets from any address >>with source port 53 to connect with any open udp port on your system, >>and allows the responses as well. It's a simple matter using such as >>netcat to source packets from port 53.=20 > >Should I restrict it by specifically stating the service? >How can I be safe? What would the rule look like?=20 > > >>I gather from this that you're not running a DNS server yourself, but >>using upstream server/s? In that case a stateful rule is safer: > >Again, I apologize for not being clear. I will be running >DNS on this box for the domains being hosted. So, it will >be polled whenever a request for a hosted domain is needed. > > > >> allow udp from me to any 53 keep-state=20 >> >>which allows after the return packets but denies connections not >>initiated from your box.=20 >> >> > >> # SSH >> > >> # Note that /etc/hosts.allow has restrictions >> > >> # on which IP addresses are allowed. >> > >> # >> > >> # Allow SSH: >> > >> add allow tcp from any to any ssh in setup >> > > >> >>By 'ssh working', I guess you mean ssh connections to this box from >>elsewhere, rather than ssh connections from this box? Not clear. > >Sorry! I am using SSH into this box, since it is easier to >cut and paste for editing and configuration. > >I can't really see a situation where I would normally need to SSH >outbound, can you? I use the Windoze boxes for that. > > >> > >> # HTTP & HTTPS: >> > >> add allow tcp from any to any https in setup >> > >> add allow tcp from any to any http in setup >> > > >> >>So, you have a webserver running on this box, listening on ports 80 > and >>443? You've verified with 'netstat -finet -a' that this is the case? > >Yes: > ># netstat -finet -a >Active Internet connections (including servers) >Proto Recv-Q Send-Q Local Address Foreign Address =20 > (state) >tcp4 0 0 192.168.1.109.ssh 192.168.1.107.3502 =20 > ESTABLISHED >tcp4 0 52 192.168.1.109.ssh 192.168.1.107.2266 =20 > ESTABLISHED >tcp4 0 0 *.poppassd *.* =20 > LISTEN >tcp4 0 0 *.ftp *.* =20 > LISTEN >tcp4 0 0 *.smtps *.* =20 > LISTEN >tcp4 0 0 *.smtp *.* =20 > LISTEN >tcp4 0 0 localhost.locald.3000 *.* =20 > LISTEN >tcp4 0 0 *.pop3s *.* =20 > LISTEN >tcp4 0 0 *.pop3 *.* =20 > LISTEN >tcp4 0 0 *.imaps *.* =20 > LISTEN >tcp4 0 0 *.imap *.* =20 > LISTEN >tcp4 0 0 *.8443 *.* =20 > LISTEN >tcp4 0 0 *.8880 *.* =20 > LISTEN >tcp4 0 0 *.3306 *.* =20 > LISTEN >tcp4 0 0 localhost.locald.8005 *.* =20 > LISTEN >tcp4 0 0 *.9008 *.* =20 > LISTEN >tcp4 0 0 *.8009 *.* =20 > LISTEN >tcp46 0 0 *.https *.* =20 > LISTEN >tcp46 0 0 *.http *.* =20 > LISTEN >tcp4 0 0 *.9080 *.* =20 > LISTEN >tcp4 0 0 *.8180 *.* =20 > LISTEN >tcp4 0 0 localhost.locald.postg *.* =20 > LISTEN >tcp4 0 0 localhost.locald.rndc *.* =20 > LISTEN >tcp4 0 0 localhost.locald.domai *.* =20 > LISTEN >tcp4 0 0 192.168.1.109.domain *.* =20 > LISTEN >tcp4 0 0 *.ssh *.* =20 > LISTEN >udp4 0 0 192.168.1.109.24889 ns1.ournameserver.net.53 >udp4 0 0 *.51750 *.* >udp4 0 0 localhost.locald.domai *.* >udp4 0 0 192.168.1.109.domain *.* >udp4 0 0 *.syslog *.* > > > > >> >> > >> # Mail: SMTP & IMAP: >> > >> add allow tcp from any to any smtp in setup >> > >> add allow tcp from any to any imap in setup >> > > >> >>You're running SMTP and IMAP servers, verified as above? >> >>You see, this also allows you (as 'any') to connect to any outside > SMTP >>server too. It really helps to differentiate connections into your > box >>from those you're making to outside boxes, which these don't do. >>=20 >>Have a close look at the 'simple' section in rc.firewall. =20 > >I have scanned various versions of "rc.firewall". I kinda understand >what is going on, but there are so many places that seem anti-intuitive >to me. > >Also, what are the differences between running a script and loading >these rules on bootup?=20 > > > >>There are >>advantages to running a script such as that rather than rules in a > file, >>like variable substitution, at least while getting it all working > right.=20 > >I have mixed feelings about variables. I guess they make >it easier if you change a network card or IP addresses--you >only have to do it in one place. =20 > >However, a search and replace command doesn't take much >time at all. Also, they add a level of complexity to >a situation that (to me) is complex enough already. >And, I wonder if by not using variables, I can save a >few microseconds when processing traffic. ;^) > > > >> > >> # FTP: >> > >> add allow tcp from any to any ftp in setup >> > >> add allow tcp from any to any ftp\-data in setup >> > >> add allow tcp from any ftp\-data to any setup out >> > > >> >>Mmm, I prefer using and enforcing FTP passive mode, but YMMV. > >How would I do that? This guy doesn't think it's even=20 >possible: >http://tinyurl.com/2z6ynr >=20 > >> > >> # Allow NTP in and out >> > >> add allow udp from any ntp to 128.252.19.1 ntp out >> > >> add allow udp from 128.252.19.1 ntp to any ntp in >> > > >> >>Unless running a time service for other boxes, something like: >> >> allow udp from me to any ntp keep-state # or to a specific server > >Well, I think that since NTP is such a minimal user >of resources, that I would like to rely on this >box for the correct time. That way, I don't have >to bug the stratum 1 boxes. Shall I use my original? > > >> >> > >> # Deny and log everything else: >> > >> add deny log all from any to any >> > >Bingo! >> >>Ok, so you got rid of interface 'all', great. > >Is this better? > > add deny log ip from any to any > =20 >If so, I just don't understand this. Here is what the >"Fine Manual" says: > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > protocol: [not] protocol-name | protocol-number > An IP protocol specified by number or name (for a complete list > see /etc/protocols), or one of the following keywords: > > ip4 | ipv4 > Matches IPv4 packets. > > ip6 | ipv6 > Matches IPv6 packets. > > ip | all > Matches any packet. > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > =20 >According to this, "ip" and "all" are synonymous. Criminy! >What am I missing here? > =20 > > >> > >"ipfw -a list" may also help (packet counts). >> >>It's only a short ruleset, it may help us if you show the output of > say >>'ipfw -t show' (or ipfw -at list, same thing), if you're still having >>problems, but see below re 'inness' and 'outness'. >> >> > I've been banging my head against this for the past few >> > days. I don't get it. =20 >> >=20 >> > My understanding of the way this is supposed to work is >> > that: >> >=20 >> > # HTTP & HTTPS: >> > add allow tcp from any to any https in setup >> > add allow tcp from any to any http in setup >> >=20 >> > should let initial HTTP & HTTPS requests through, >> > and that: >> >=20 >> > # Allow established connections: >> > add allow tcp from any to any established >> >>Not quite. Looks like you're allowing http/https setup packets in > (ie, >>into the firewall) but not letting them out (of the firewall, to the >>webserver). For example in the 'simple' ruleset mentioned, we have: >> >> # Allow access to our WWW >> ${fwcmd} add pass tcp from any to ${oip} 80 setup >> >> # Reject&Log all setup of incoming connections from the > outside >> ${fwcmd} add deny log tcp from any to any in via ${oif} setup >> >> # Allow setup of any other TCP connection >> ${fwcmd} add pass tcp from any to any setup > >I really don't get the above rule. Isn't it saying that >*any* kind of TCP connection can come in or go out initially? > > > >>Note there's no 'in' or 'out' on the port 80 rule, so this allows the >>packets on both the in and out pass of the firewall. Also, the IP is >>specified as our IP - 'me' will do fine if it's just this box.=20 > >In my set, should I include some "out" rules like this: > > add allow tcp from any to any https out setup > add allow tcp from any to any http out setup >=20 > >> >> > should allow connections that are "setup" to=20 >> > continue. Do I need a "check-state" or "keep-state" >> > statement somewhere? >> >>No, though you can use stateful TCP rules if you want to, in which > case >>you'll want to DENY established connections. Personally I find > relying >>on the TCP state established by using 'setup' and 'established' fine > for >>TCP, but tend to use keep-state for UDP and some ICMP rules.=20 > >That sounds reasonable. > > >> > I don't understand what is wrong with the last rule: >> >=20 >> > # Deny and log everything else: >> > add deny log all from any to any >> >=20 >> > My understanding is that anything that doesn't match >> > the previous rules will match this one and hence >> > be logged and denied. Is this not correct? >> >>That's correct. Aren't you seeing any? Try show rather than tell. > >Showing: > ># ipfw -a -S -N -t list >00100 688 173384 Thu Dec 20 15:32:17 2007 set 0 allow log logamount > 10 ip from any to any via lo0 >00200 0 0 set 0 deny log logamount 10 > ip from any to 127.0.0.0/8 >00300 0 0 set 0 deny log logamount 10 > ip from 127.0.0.0/8 to any >00400 4344 1712050 Fri Dec 21 00:23:37 2007 set 0 allow log logamount > 10 tcp from any to any established >00500 0 0 set 0 deny log logamount 10 > ip from any to any frag >00600 4 240 Wed Dec 19 23:05:31 2007 set 0 count icmp from any > to any icmptypes 8 in >00700 8 480 Wed Dec 19 23:05:31 2007 set 0 allow log logamount > 10 icmp from any to any icmptypes 0,3,8 >00800 0 0 set 0 allow log logamount 10 > udp from any to any dst-port 33434-34458 in >00900 0 0 set 0 allow log logamount 10 > udp from any 33434-34458 to any out >01000 366 24038 Fri Dec 21 00:02:00 2007 set 0 allow log logamount > 10 udp from any to any dst-port domain out >01100 364 59582 Fri Dec 21 00:02:00 2007 set 0 allow log logamount > 10 udp from any domain to any in >01200 1 48 Thu Dec 20 16:49:47 2007 set 0 allow log logamount > 10 tcp from any to any dst-port ssh in setup >01300 0 0 set 0 allow log logamount 10 > tcp from any to any dst-port https in setup >01400 6 288 Thu Dec 20 14:43:38 2007 set 0 allow log logamount > 10 tcp from any to any dst-port http in setup >01500 98 6272 Fri Dec 21 00:02:00 2007 set 0 allow log logamount > 10 tcp from any to any dst-port http >01600 1 64 Thu Dec 20 15:25:01 2007 set 0 allow log logamount > 10 tcp from any to any dst-port https >01700 0 0 set 0 allow log logamount 10 > tcp from any to any dst-port smtp in setup >01800 0 0 set 0 allow log logamount 10 > tcp from any to any dst-port imap in setup >01900 43 2064 Wed Dec 19 23:16:18 2007 set 0 allow log logamount > 10 tcp from any to any dst-port ftp in setup >02000 0 0 set 0 allow log logamount 10 > tcp from any to any dst-port ftp-data in setup >02100 0 0 set 0 allow log logamount 10 > tcp from any ftp-data to any setup out >02200 100 7600 Thu Dec 20 23:47:00 2007 set 0 allow log logamount > 10 udp from any ntp to navobs1.wustl.edu dst-port ntp out >02300 100 7600 Thu Dec 20 23:47:00 2007 set 0 allow log logamount > 10 udp from navobs1.wustl.edu ntp to any dst-port ntp in >02400 2058 226123 Fri Dec 21 00:17:20 2007 set 0 deny log logamount 10 > ip from any to any >65535 7 909 Wed Dec 19 22:58:29 2007 set 31 deny ip from any to > any > >Lot of stuff being denied. I think some of that >is my HTTP and HTTPS initial requests. What to do? > >> >> > Again, I am having a great deal of difficulty >> > understanding why these rules don't work as expected. >> > I've scoured the 'Net and printed out just about >> > every coherent ruleset out there. >> >=20 >> > Besides adding the "log" keyword on all of the rules, >> > these are the debugging tools I have been using: >> >=20 >> > ipfw disable firewall >> > ipfw -f flush >> > ipfw enable firewall >> > /etc/rc.d/ipfw start >> > ipfw -a -S -N -t list >> > ipfw list =20 >> > tail -f /var/log/ipfw/ipfw.log >> > tcpdump -i nve0 'proto \tcp && port http' > netstat -finet -a >> >=20 >> > Could anyone please throw this tired dog a bone? >> >>Getting the two-pass nature of ipfw understood seems to be your main >>difficulty. =20 > >I would definitely agree with you. I am completely lost. > >By "two-pass" do you mean "in" to the firewall, and then >"in" to the webserver, and another "two-pass": "out" from the >webserver, and "out" from the firewall? > > >>I know it was for me back then. Have a look at the section >>in ipfw(8) regarding packet flows, and although it sounds trite, RTFM >>about 10 times :) >> >>Cheers, Ian > >Love the "Fine Manual" --not! Just not enough examples for >me to understand everything. Too much abstraction--AAArrrrgh! > >Am using this link, since "man ipfw" doesn't work on 6.2. (I dare >someone to explain to me how to get it to work): >http://www.freebsd.org/cgi/man.cgi?query=3Dipfw&sektion=3D8 > >Thanks for your help, Ian. Would appreciate it if you would >kick my butt in the proper direction again. > >Any other takers/kickers? > > >Latest grope in the dark: >=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ># ipfw.rules ># ipfw firewall ruleset ># 2007 Dec 20 > ># By default, everything is denied access. You ># need to specifically allow something for it ># to work. > ># Loopback:=20 ># Allow anything on the local loopback: >add allow log all from any to any via lo0 > ># Disallow spoofed access to local: >add deny log ip from any to 127.0.0.0/8 >add deny log ip from 127.0.0.0/8 to any > ># Allow established connections: >add allow log tcp from any to any established > ># Deny fragmented packets: >add deny log ip from any to any frag > ># Show pings: >add count icmp from any to any icmptypes 8 in > ># Allow pings, ping replies, and host unreach: >add allow log icmp from any to any icmptypes 0,8,3 > ># Allow UDP traceroutes: >add allow log udp from any to any 33434-34458 in >add allow log udp from any 33434-34458 to any out > ># Allow DNS with name server >add allow log udp from any to any domain out >add allow log udp from any domain to any in > ># SSH ># Note that /etc/hosts.allow has restrictions ># on which IP addresses are allowed. ># ># Allow SSH: >add allow log tcp from any to any ssh in setup > ># HTTP & HTTPS: >add allow log tcp from any to any https in setup >add allow log tcp from any to any http in setup > >add allow log tcp from any to any dst-port 80 >add allow log tcp from any to any dst-port 443 > ># Mail: SMTP & IMAP: >add allow log tcp from any to any smtp in setup >add allow log tcp from any to any imap in setup > ># FTP: >add allow log tcp from any to any ftp in setup >add allow log tcp from any to any ftp\-data in setup >add allow log tcp from any ftp\-data to any setup out > ># Allow NTP in and out >add allow log udp from any ntp to 128.252.19.1 ntp out >add allow log udp from 128.252.19.1 ntp to any ntp in > > ># Deny and log everything else: ># add deny log all from any to any >add deny log ip from any to any >=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > > > >Start Here to Find It Fast!=99 -> > http://www.US-Webmasters.com/best-start-page/ >$8.77 Domain Names -> http://domains.us-webmasters.com/ > >_______________________________________________ >freebsd-security@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-security >To unsubscribe, send any mail to > "freebsd-security-unsubscribe@freebsd.org" > > > > > > > =20 >______________________________________________________________________ >______________ >Never miss a thing. Make Yahoo your home page.=20 >http://www.yahoo.com/r/hs >_______________________________________________ >freebsd-security@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-security >To unsubscribe, send any mail to "freebsd-security-unsubscribe@freebsd.org" Start Here to Find It Fast!=99 ->= http://www.US-Webmasters.com/best-start-page/ $8.77 Domain Names -> http://domains.us-webmasters.com/ From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 20:40:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2054E16A41B for ; Sun, 23 Dec 2007 20:40:29 +0000 (UTC) (envelope-from ismail@EnderUNIX.org) Received: from istanbul.enderunix.org (freefall.marmara.edu.tr [193.140.143.23]) by mx1.freebsd.org (Postfix) with ESMTP id 19F7813C465 for ; Sun, 23 Dec 2007 20:40:27 +0000 (UTC) (envelope-from ismail@EnderUNIX.org) Received: (qmail 36573 invoked by uid 1040); 23 Dec 2007 20:40:51 -0000 Received: from unknown (HELO ISMAIL) (ismail@127.0.0.1) by 0 with ESMTPA; 23 Dec 2007 20:40:49 -0000 Date: Sun, 23 Dec 2007 22:40:12 +0200 From: Ismail YENIGUL X-Mailer: The Bat! (v3.99.3) Professional Organization: EnderUNIX X-Priority: 3 (Normal) Message-ID: <1601099540.20071223224012@EnderUNIX.org> To: "Ivan Voras" In-Reply-To: <9bbcef730712221435o1f1227a1l1ca840e1474aacfb@mail.gmail.com> References: <1605513356.20071219221424@EnderUNIX.org> <879443695.20071222190910@EnderUNIX.org> <9bbcef730712221435o1f1227a1l1ca840e1474aacfb@mail.gmail.com> MIME-Version: 1.0 Content-Type: multipart/mixed;boundary="----------5AF21BB1FFA4DC7" X-SMTP-Filter: SurGATE SMTP Filter Engine Release 1.0.1 http://www.endersys.com X-SurGATE-Result: Clean (Content eval: -4.40 points) Cc: freebsd-database@freebsd.org, freebsd-questions@freebsd.org Subject: Re[4]: Turkish character sorting on PostgreSQL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Ismail YENIGUL List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 20:40:29 -0000 ------------5AF21BB1FFA4DC7 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hello, I think, I managed to give full Turkish locale support by modifying /usr/src/share/colldef/la_LN.ISO8859-1.src file. I made some tests, It is working fine. I will submit a new PR. Also please find the attached patch for the people who want to test it. Sunday, December 23, 2007, 12:35:08 AM, you wrote: > On 22/12/2007, Ismail YENIGUL wrote: >> By the way, LC_COLLATE is link to the ../la_LN.US-ASCII/LC_COLLATE >> in /usr/share/locale/tr_TR.ISO8859-9 directory. Does this mean that >> LC_COLLATE is missing for tr_TR.ISO8859-9 ? > Yes. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" --=20 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + http://www.enderunix.org/ismail http://www.endersys.com.tr + + EnderUNIX SDT @ Tr Endersys Consultancy Ltd. + + ismail ~ enderunix.org ismail.yenigul ~ endersys.com.tr + + Volunteer, Core Team Member Project Manager + +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ TCP/IP ve A=C4=9F g=C3=BCvenli=C4=9Fi kitab=C4=B1n=C4=B1n 2. bask=C4=B1s=C4= =B1 =C3=A7=C4=B1kt=C4=B1! http://dukkan.acikakademi.com ------------5AF21BB1FFA4DC7 Content-Type: application/octet-stream; name="tr_TR.ISO8859-9.diff" Content-transfer-encoding: base64 Content-Disposition: attachment; filename="tr_TR.ISO8859-9.diff" ZGlmZiAtcnVOIC91c3Ivc3JjL3NoYXJlL2NvbGxkZWYub3JpZy9NYWtlZmlsZSAvdXNyL3Ny Yy9zaGFyZS9jb2xsZGVmL01ha2VmaWxlCi0tLSAvdXNyL3NyYy9zaGFyZS9jb2xsZGVmLm9y aWcvTWFrZWZpbGUJU3VuIERlYyAyMyAyMjozNjowMiAyMDA3CisrKyAvdXNyL3NyYy9zaGFy ZS9jb2xsZGVmL01ha2VmaWxlCVN1biBEZWMgMjMgMjI6MzU6NDIgMjAwNwpAQCAtMzQsNiAr MzQsNyBAQAogCQlzcl9ZVS5JU084ODU5LTUgXAogCQlzdl9TRS5JU084ODU5LTEgXAogCQlz dl9TRS5JU084ODU5LTE1IFwKKwkJdHJfVFIuSVNPODg1OS05IFwKIAkJdWtfVUEuQ1AxMjUx IFwKIAkJdWtfVUEuSVNPODg1OS01IFwKIAkJdWtfVUEuS09JOC1VCkBAIC03OSw3ICs4MCw2 IEBACiBVUy1BU0NJSV9HQjE4MDMwPSBsYV9MTjp6aF9DTgogVVMtQVNDSUlfR0IyMzEyPSBs YV9MTjp6aF9DTgogVVMtQVNDSUlfR0JLPQlsYV9MTjp6aF9DTgotVVMtQVNDSUlfSVNPODg1 OS05PSBsYV9MTjp0cl9UUgogVVMtQVNDSUlfU0pJUz0JbGFfTE46amFfSlAKIAogQVNDSUlM SU5LUz0JZW5fQVUgZW5fQ0EgZW5fR0IgZW5fTlogZW5fVVMKZGlmZiAtcnVOIC91c3Ivc3Jj L3NoYXJlL2NvbGxkZWYub3JpZy90cl9UUi5JU084ODU5LTkuc3JjIC91c3Ivc3JjL3NoYXJl L2NvbGxkZWYvdHJfVFIuSVNPODg1OS05LnNyYwotLS0gL3Vzci9zcmMvc2hhcmUvY29sbGRl Zi5vcmlnL3RyX1RSLklTTzg4NTktOS5zcmMJVGh1IEphbiAgMSAwMjowMDowMCAxOTcwCisr KyAvdXNyL3NyYy9zaGFyZS9jb2xsZGVmL3RyX1RSLklTTzg4NTktOS5zcmMJU3VuIERlYyAy MyAyMjoyNjowNCAyMDA3CkBAIC0wLDAgKzEsMzYgQEAKKyMgbGF0aW4xIChiYWNrd2FyZCBj b21wYXRpYmxlIHdpdGggQVNDSUkpCisjCisjICRGcmVlQlNEOiBzcmMvc2hhcmUvY29sbGRl Zi9sYV9MTi5JU084ODU5LTEuc3JjLHYgMS4xMCAyMDAxLzA2LzEwIDEzOjQzOjQ3IGFjaGUg RXhwICQKKyMKK2NoYXJtYXAgbWFwLklTTzg4NTktMQorb3JkZXIgXAorIyBjb250cm9scwor CTxOVT47Li4uOzxVUz47PFBBPjsuLi47PEFDPjtcCisjCisJPE5TPjs8U1A+OyE7PCFJPjtc Ijs8PDw+OzwvPi8+Pjs8TmI+O1wKKwk8Q3U+OzxDdD47PERPPjs8UGQ+OzxZZT47XAorCSU7 Jjs8Jyw+Oyc7XCg7XCk7KjsrOzwrLT47PC06Pjs8Klg+O1wsOzwtLT47LTsuOy87XAorIyBk aWdpdHMKKwkoMCw8MTQ+LDwxMj4sPDM0Pik7KDEsPDFTPik7KDIsPDJTPik7KDMsPDNTPik7 NDsuLi47OTtcCisjCisJOjtcOztcPDs9Oz47Pzs8P0k+OzxTRT47PFBJPjs8Q28+OzxSZz47 PEF0PjtcCisjIGNhcGl0YWwKKwkoQSw8QSc+LDxBIT4sPEEvPj4sPEFBPiw8QTo+LDxBPz4s PEFFPik7XAorCUI7KEMsPEMsPik7RDsoRSw8RSc+LDxFIT4sPEUvPj4sPEU6Pik7XAorCUY7 Rzs8RC0+O0g7KEksPEknPiw8SSE+LDxJLz4+LDxJOj4pOzxZJz47XAorCUo7Li4uO007KE4s PE4/Pik7KE8sPE8nPiw8TyE+LDxPLz4+LDxPOj4sPE8/Piw8Ty8vPik7XAorCVA7Li4uO1M7 PFRIPjtUOyhVLDxVJz4sPFUhPiw8VS8+Piw8VTo+KTtcCisJVjtXO1g7WTtaO1wKKyMKKwlb O1xcO107Xjs8Jzo+O187PCdtPjs8Jyc+O2A7XAorIyBzbWFsbAorCShhLDxhJz4sPGEhPiw8 YS8+Piw8YWE+LDxhOj4sPGE/Piw8YWU+KTtcCisJYjsoYyw8Yyw+KTtkOyhlLDxlJz4sPGUh Piw8ZS8+Piw8ZTo+KTtcCisJZjtnOzxkLT47aDs8eSc+OyhpLDxpJz4sPGkhPiw8aS8+Piw8 aTo+KTtcCisJajsuLi47bTsobiw8bj8+KTsobyw8byc+LDxvIT4sPG8vPj4sPG86Piw8bz8+ LDxvLy8+KTtcCisJcDsuLi47czs8dGg+O3Q7KHUsPHUnPiw8dSE+LDx1Lz4+LDx1Oj4pO1wK Kwl2O3c7eDsoeSw8eTo+KTt6Ozxzcz47XAorIworCVx7OzxOTz47fDs8QkI+O1x9O347PC5N Pjs8REc+OzxNeT47PERUPjtcCisjIHJlbWFpbnMKKwk8LWE+Ozwtbz4K ------------5AF21BB1FFA4DC7-- From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 21:11:41 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BAF2716A417 for ; Sun, 23 Dec 2007 21:11:41 +0000 (UTC) (envelope-from merlyn500@gmail.com) Received: from fk-out-0910.google.com (fk-out-0910.google.com [209.85.128.189]) by mx1.freebsd.org (Postfix) with ESMTP id 2A37C13C4FB for ; Sun, 23 Dec 2007 21:11:40 +0000 (UTC) (envelope-from merlyn500@gmail.com) Received: by fk-out-0910.google.com with SMTP id b27so2000938fka.11 for ; Sun, 23 Dec 2007 13:11:40 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=LZh+IHElw3Cxrvl3e4rTNQnTfRxPUdNXjnrmv5Nhlps=; b=PwrOecnJU9yGbZl/jRTGxI7o+npgpnmWOZXu71C66soCOX+PCeXsx/tdUfAQMJ4AzsNRtz0JO0/UInEwhDwENg1nHgzrCE0M/hVkHMBpTCYgDf529X2uAKMYexFpDOCkjtc1NvxKMe9+eiknRuQLeNbj1X0H2W37pmQUJoryCsQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=T43Fg7yXa33ay6UvdiavilmjmCSYytN2R+AyiU21D01I68WlHc56CQJYc3LqBeTuczwC+mqFFavQMHN4x4RLWGUM1p8a6giOhdLfA3pyngm1nZ1QVlM2oB2t1ie/l3RqB+W67eCrIPxyxy7gdm1Lq7la6qbsiFntyCyK9GAUhsw= Received: by 10.78.159.7 with SMTP id h7mr4872210hue.8.1198442565307; Sun, 23 Dec 2007 12:42:45 -0800 (PST) Received: from ?192.168.1.3? ( [85.207.232.114]) by mx.google.com with ESMTPS id i8sm3564970nfh.30.2007.12.23.12.42.42 (version=SSLv3 cipher=OTHER); Sun, 23 Dec 2007 12:42:43 -0800 (PST) From: Milan Bartos To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 21:41:27 +0100 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712232141.28535.merlyn500@gmail.com> Subject: Module pci/ichss_pci failed to register: 17 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 21:11:41 -0000 Hello, i am running: --- FreeBSD Vallhala 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sun Dec 23 20:00:55 CET 2007 merlyn@Vallhala:/usr/obj/usr/src/sys/VALLHALA i386 --- on, --- Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Sun Dec 23 20:00:55 CET 2007 merlyn@Vallhala:/usr/obj/usr/src/sys/VALLHALA WARNING: WITNESS option enabled, expect reduced performance. module_register: module pci/ichss_pci already exists! Module pci/ichss_pci failed to register: 17 module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/smist already exists! Module cpu/smist failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf Features2=0x180 real memory = 536281088 (511 MB) avail memory = 515215360 (491 MB) kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 cpu0: on acpi0 est0: on cpu0 p4tcc0: on cpu0 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci_link3: BIOS IRQ 11 for 0.29.INTB is invalid pci0: on pcib0 agp0: on hostb0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 11 at device 0.0 on pci1 uhci0: port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 10 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xd0000000-0xd00003ff irq 10 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pci_link3: BIOS IRQ 11 for 2.5.INTA is invalid pci2: on pcib2 bfe0: mem 0xd0200000-0xd0201fff irq 10 at device 5.0 on pci2 miibus0: on bfe0 bmtphy0: PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: using obsoleted if_watchdog interface bfe0: Ethernet address: 00:0a:e4:b6:20:82 bfe0: [ITHREAD] pci2: at device 6.0 (no driver attached) cbb0: at device 9.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] cbb1: irq 10 at device 9.1 on pci2 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [ITHREAD] fwohci0: mem 0xd0203000-0xd02037ff irq 11 at device 9.2 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 06:e4:0a:00:69:4f:10:03 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwip0: on firewire0 fwip0: Firewire address: 06:e4:0a:00:69:4f:10:03 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 06:e4:0a:4f:10:03 fwe0: Ethernet address: 06:e4:0a:4f:10:03 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x107c000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] pci0: at device 31.3 (no driver attached) pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0000c00-0xd0000dff,0xd0000800-0xd00008ff irq 10 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: pci0: at device 31.6 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ukbd0: on uhub0 kbd2 at ukbd0 uhid0: on uhub0 Timecounter "TSC" frequency 1694510135 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 57231MB at ata0-master UDMA100 acd0: DVDR at ata1-master UDMA33 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 WARNING: WITNESS option enabled, expect reduced performance. cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s1a --- And i have a little problem. In dmesg appears: --- module_register: module pci/ichss_pci already exists! Module pci/ichss_pci failed to register: 17 module_register: module cpu/ichss already exists! Module cpu/ichss failed to register: 17 module_register: module cpu/est already exists! Module cpu/est failed to register: 17 module_register: module cpu/p4tcc already exists! Module cpu/p4tcc failed to register: 17 module_register: module cpu/powernow already exists! Module cpu/powernow failed to register: 17 module_register: module cpu/smist already exists! Module cpu/smist failed to register: 17 -- I tried rm -rf /usr/src (if some problem in configuration e.g. src/sys/i386/conf/VALLHALA (GENERIC)) and rebuild world & kernel, but it does not disappeared. What is it? And how can i repair it? Thank you, for your help Milan Bartos From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 21:23:48 2007 Return-Path: Delivered-To: FreeBSD-Questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E0A616A417 for ; Sun, 23 Dec 2007 21:23:48 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from postfix1-g20.free.fr (postfix1-g20.free.fr [212.27.60.42]) by mx1.freebsd.org (Postfix) with ESMTP id 1260213C458 for ; Sun, 23 Dec 2007 21:23:48 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from smtp1-g19.free.fr (smtp1-g19.free.fr [212.27.42.27]) by postfix1-g20.free.fr (Postfix) with ESMTP id CB40220890BC for ; Sun, 23 Dec 2007 21:52:01 +0100 (CET) Received: from smtp1-g19.free.fr (localhost.localdomain [127.0.0.1]) by smtp1-g19.free.fr (Postfix) with ESMTP id E781F1AB2DF for ; Sun, 23 Dec 2007 21:51:59 +0100 (CET) Received: from [192.168.1.5] (fluoxetine.oxalate.org [82.66.233.195]) by smtp1-g19.free.fr (Postfix) with ESMTP id C020D1AB2EF for ; Sun, 23 Dec 2007 21:51:59 +0100 (CET) Message-ID: <476ECA9B.4090805@free.fr> Date: Sun, 23 Dec 2007 21:52:43 +0100 From: QADMOS User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: FreeBSD-Questions@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 21:23:48 -0000 Hi everyone, i'm having a hard time with bind9. I'm trying to set up an authoritative dns server. Unfortunately when i try to launch it with an 'rndc start' i get this error message : > rndc: connect failed: 127.0.0.1#953: connection refused I've reviewed my conf files but frankly i couldn't see what was wrong. I've actually rewritten them from scratch several times to really check that nothing was missing and couldn't see anything was wrong. The localhost.rev file is configured correctly. I've also tried to regenerate new rndc.keys and edit named.conf accordingly but to no avail. I've also considered a possible file permissions in /etc/namedb and in /var/run/named issue but that didn't yield much either. Finally the biggest trouble is that nothing is logged in any log file ! nothing in /var/log/messages nothing in /var/log/all.log nothing anywhere so i'm really confused here about what direction to investigate. Has anyone ever encountered such an issue ? Thx in advance for any help. From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 21:48:18 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3B72C16A41A for ; Sun, 23 Dec 2007 21:48:18 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from pollux.dfwlp.com (rrcs-64-183-212-244.sw.biz.rr.com [64.183.212.244]) by mx1.freebsd.org (Postfix) with ESMTP id 22D2A13C455 for ; Sun, 23 Dec 2007 21:48:18 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from athena.dfwlp.com (athena.dfwlp.com [192.168.125.82]) (authenticated bits=0) by pollux.dfwlp.com (8.13.8/8.13.8) with ESMTP id lBNLmFQV033241 for ; Sun, 23 Dec 2007 15:48:15 -0600 (CST) (envelope-from freebsd@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 15:48:14 -0600 User-Agent: KMail/1.9.7 References: <476ECA9B.4090805@free.fr> In-Reply-To: <476ECA9B.4090805@free.fr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712231548.14320.freebsd@dfwlp.com> X-Spam-Status: No, score=-4.4 required=3.6 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on pollux.dfwlp.com Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 21:48:18 -0000 On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: > Hi everyone, > > i'm having a hard time with bind9. > > I'm trying to set up an authoritative dns server. > > Unfortunately when i try to launch it with an 'rndc start' i get this > > error message : > > rndc: connect failed: 127.0.0.1#953: connection refused > > I've reviewed my conf files but frankly i couldn't see what was wrong. > I've actually rewritten them from scratch several times to really check > that nothing was missing and couldn't see anything was wrong. The > localhost.rev file is configured correctly. I've also tried to > regenerate new rndc.keys and edit named.conf accordingly but to no avail. > > I've also considered a possible file permissions in /etc/namedb and in > /var/run/named issue but that didn't yield much either. > > Finally the biggest trouble is that nothing is logged in any log file ! > nothing in /var/log/messages nothing in /var/log/all.log nothing > anywhere so i'm really confused here about what direction to investigate. > > Has anyone ever encountered such an issue ? > > Thx in advance for any help. do you get same problem with: /etc/rc.d/named start ? -- Jonathan Horne http://dfwlpiki.dfwlp.org freebsd@dfwlp.com From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 22:04:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 39CA716A417 for ; Sun, 23 Dec 2007 22:04:15 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from smtp1-g19.free.fr (smtp1-g19.free.fr [212.27.42.27]) by mx1.freebsd.org (Postfix) with ESMTP id E244F13C4CE for ; Sun, 23 Dec 2007 22:04:14 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from smtp1-g19.free.fr (localhost.localdomain [127.0.0.1]) by smtp1-g19.free.fr (Postfix) with ESMTP id A2CD41AB2E0 for ; Sun, 23 Dec 2007 23:04:13 +0100 (CET) Received: from [192.168.1.5] (fluoxetine.oxalate.org [82.66.233.195]) by smtp1-g19.free.fr (Postfix) with ESMTP id 5A60E1AB2D8 for ; Sun, 23 Dec 2007 23:04:13 +0100 (CET) Message-ID: <476EDB8B.5060301@free.fr> Date: Sun, 23 Dec 2007 23:04:59 +0100 From: QADMOS User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> In-Reply-To: <200712231548.14320.freebsd@dfwlp.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 22:04:15 -0000 Jonathan Horne a écrit : > On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: > >> Hi everyone, >> >> i'm having a hard time with bind9. >> >> I'm trying to set up an authoritative dns server. >> >> Unfortunately when i try to launch it with an 'rndc start' i get this >> >> error message : >> > rndc: connect failed: 127.0.0.1#953: connection refused >> >> I've reviewed my conf files but frankly i couldn't see what was wrong. >> I've actually rewritten them from scratch several times to really check >> that nothing was missing and couldn't see anything was wrong. The >> localhost.rev file is configured correctly. I've also tried to >> regenerate new rndc.keys and edit named.conf accordingly but to no avail. >> >> I've also considered a possible file permissions in /etc/namedb and in >> /var/run/named issue but that didn't yield much either. >> >> Finally the biggest trouble is that nothing is logged in any log file ! >> nothing in /var/log/messages nothing in /var/log/all.log nothing >> anywhere so i'm really confused here about what direction to investigate. >> >> Has anyone ever encountered such an issue ? >> >> Thx in advance for any help. >> > > do you get same problem with: > > /etc/rc.d/named start > > ? > > Well i've also tried that actually and when i do that : 1/ nothing is logged 2/ nothing is launched either there's just no error message despite that the named is not running (checked with ps waux | grep named ) From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 22:14:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4D6AD16A417 for ; Sun, 23 Dec 2007 22:14:49 +0000 (UTC) (envelope-from gelsemap@superhero.nl) Received: from superman.superhero.nl (superhero.nl [82.95.198.17]) by mx1.freebsd.org (Postfix) with ESMTP id B0ADB13C4D9 for ; Sun, 23 Dec 2007 22:14:48 +0000 (UTC) (envelope-from gelsemap@superhero.nl) Received: (qmail 79575 invoked by uid 80); 23 Dec 2007 22:14:31 -0000 Received: from robin.ad.superhero.nl ([10.202.77.197]) (SquirrelMail authenticated user gelsemap) by webmail.superhero.nl with HTTP; Sun, 23 Dec 2007 23:14:31 +0100 (CET) Message-ID: <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> In-Reply-To: <476EDB8B.5060301@free.fr> References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> <476EDB8B.5060301@free.fr> Date: Sun, 23 Dec 2007 23:14:31 +0100 (CET) From: "Gelsema, P \(Patrick\)" To: "QADMOS" User-Agent: SquirrelMail/1.4.8 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: freebsd-questions@freebsd.org Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 22:14:49 -0000 On Sun, December 23, 2007 23:04, QADMOS wrote: > > > Jonathan Horne a écrit : >> On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: >> >>> Hi everyone, >>> >>> i'm having a hard time with bind9. >>> >>> I'm trying to set up an authoritative dns server. >>> >>> Unfortunately when i try to launch it with an 'rndc start' i get this >>> >>> error message : >>> > rndc: connect failed: 127.0.0.1#953: connection refused >>> >>> I've reviewed my conf files but frankly i couldn't see what was wrong. >>> I've actually rewritten them from scratch several times to really check >>> that nothing was missing and couldn't see anything was wrong. The >>> localhost.rev file is configured correctly. I've also tried to >>> regenerate new rndc.keys and edit named.conf accordingly but to no >>> avail. >>> >>> I've also considered a possible file permissions in /etc/namedb and in >>> /var/run/named issue but that didn't yield much either. >>> >>> Finally the biggest trouble is that nothing is logged in any log file ! >>> nothing in /var/log/messages nothing in /var/log/all.log nothing >>> anywhere so i'm really confused here about what direction to >>> investigate. >>> >>> Has anyone ever encountered such an issue ? >>> >>> Thx in advance for any help. >>> >> >> do you get same problem with: >> >> /etc/rc.d/named start >> >> ? >> >> > > Well i've also tried that actually and when i do that : > 1/ nothing is logged > 2/ nothing is launched either Do you have the following in rc.conf? hulk# cat /etc/rc.conf | grep named named_enable="YES" To me it seems your problem lies in the fact that named is not starting, so rndc can not control anything. Rgds, Patrick > > there's just no error message despite that the named is not running > (checked with ps waux | grep named ) > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 22:45:18 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5127616A417 for ; Sun, 23 Dec 2007 22:45:18 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from smtp1-g19.free.fr (smtp1-g19.free.fr [212.27.42.27]) by mx1.freebsd.org (Postfix) with ESMTP id 0522E13C469 for ; Sun, 23 Dec 2007 22:45:17 +0000 (UTC) (envelope-from qadmos@free.fr) Received: from smtp1-g19.free.fr (localhost.localdomain [127.0.0.1]) by smtp1-g19.free.fr (Postfix) with ESMTP id C03C11AB2D4 for ; Sun, 23 Dec 2007 23:45:16 +0100 (CET) Received: from [192.168.1.5] (fluoxetine.oxalate.org [82.66.233.195]) by smtp1-g19.free.fr (Postfix) with ESMTP id 70A881AB2AD for ; Sun, 23 Dec 2007 23:45:16 +0100 (CET) Message-ID: <476EE526.2000501@free.fr> Date: Sun, 23 Dec 2007 23:45:58 +0100 From: QADMOS User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 CC: freebsd-questions@freebsd.org References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> <476EDB8B.5060301@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> In-Reply-To: <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 22:45:18 -0000 Gelsema, P (Patrick) a écrit : > On Sun, December 23, 2007 23:04, QADMOS wrote: > >> Jonathan Horne a écrit : >> >>> On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: >>> >>> >>>> Hi everyone, >>>> >>>> i'm having a hard time with bind9. >>>> >>>> I'm trying to set up an authoritative dns server. >>>> >>>> Unfortunately when i try to launch it with an 'rndc start' i get this >>>> >>>> error message : >>>> > rndc: connect failed: 127.0.0.1#953: connection refused >>>> >>>> I've reviewed my conf files but frankly i couldn't see what was wrong. >>>> I've actually rewritten them from scratch several times to really check >>>> that nothing was missing and couldn't see anything was wrong. The >>>> localhost.rev file is configured correctly. I've also tried to >>>> regenerate new rndc.keys and edit named.conf accordingly but to no >>>> avail. >>>> >>>> I've also considered a possible file permissions in /etc/namedb and in >>>> /var/run/named issue but that didn't yield much either. >>>> >>>> Finally the biggest trouble is that nothing is logged in any log file ! >>>> nothing in /var/log/messages nothing in /var/log/all.log nothing >>>> anywhere so i'm really confused here about what direction to >>>> investigate. >>>> >>>> Has anyone ever encountered such an issue ? >>>> >>>> Thx in advance for any help. >>>> >>>> >>> do you get same problem with: >>> >>> /etc/rc.d/named start >>> >>> ? >>> >>> >>> >> Well i've also tried that actually and when i do that : >> 1/ nothing is logged >> 2/ nothing is launched either >> > > Do you have the following in rc.conf? > > hulk# cat /etc/rc.conf | grep named > named_enable="YES" > > To me it seems your problem lies in the fact that named is not starting, > so rndc can not control anything. > > Rgds, > > Patrick > > >> there's just no error message despite that the named is not running >> (checked with ps waux | grep named ) >> Well Patrick i followed your suggestion and rebooted (it didn't do much after just editing rc.conf) the box and now "/etc/rc.d/named start" works fine annd named is running, 'rndc' still has the same problem though (???) I'm a bit befuddled though, because i don't understand why it's necessary to use the named_enable directive to have named running ? I understand this is necessary if you want the daemon to run at boot time but why is this necessary if you want to run it manually once the box is on ? In any case thx a lot for your help :) From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 23:26:45 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CA9B816A417 for ; Sun, 23 Dec 2007 23:26:45 +0000 (UTC) (envelope-from glen.j.barber@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.244]) by mx1.freebsd.org (Postfix) with ESMTP id 9E15113C45B for ; Sun, 23 Dec 2007 23:26:45 +0000 (UTC) (envelope-from glen.j.barber@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so298013anc.13 for ; Sun, 23 Dec 2007 15:26:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=zB/mBfljIFMy91DqbTchoexiykM7Lm2tsC3a/wW+Fmc=; b=n2jaX1Y899jZ2kmxlvCNB1ttDJ+acojANkygzbtbqQ0WZAbQPlw5t3MVXiXi94rOtTBs5nSRgiEVeexTYD9AQsdbDNQFFB5RfcSXJ4pj1U9ce1KLz6Q25ygCGJn1elZ9KR3q68mqvNJKaAw/rrTcu4qTQXGSaqoekAGZ1nIe4wY= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=ixh/n8TrsIsB2e6h0ILb6zokuTwq8Dr0RLPjSzurnOSTa7aAJj8gBh6q5pxmYKJ8eoGZhp7zR/DiyDDdrYxNlzkpxlU1S4mXbFeWCfqgzdvS2O5IO6iKybFV9qWiVs0+g23MeDGaBvWH6GfWrNQL7v3VyCNdxmLoDNcusc+IY7Y= Received: by 10.100.215.5 with SMTP id n5mr8181540ang.20.1198452023240; Sun, 23 Dec 2007 15:20:23 -0800 (PST) Received: from ?192.168.1.4? ( [24.229.62.9]) by mx.google.com with ESMTPS id h17sm14461440wxd.24.2007.12.23.15.20.21 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 23 Dec 2007 15:20:22 -0800 (PST) From: Glen Barber To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 18:20:09 -0500 User-Agent: KMail/1.9.7 References: <476ECA9B.4090805@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> <476EE526.2000501@free.fr> In-Reply-To: <476EE526.2000501@free.fr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712231820.09870.glen.j.barber@gmail.com> Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 23:26:45 -0000 My apologies for the blank post. Apparently, I became a bit trigger happy while setting up Kmail for mailing lists. From owner-freebsd-questions@FreeBSD.ORG Sun Dec 23 23:42:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6080E16A41B for ; Sun, 23 Dec 2007 23:42:52 +0000 (UTC) (envelope-from glen.j.barber@gmail.com) Received: from wx-out-0506.google.com (wx-out-0506.google.com [66.249.82.235]) by mx1.freebsd.org (Postfix) with ESMTP id ED3F213C4CC for ; Sun, 23 Dec 2007 23:42:51 +0000 (UTC) (envelope-from glen.j.barber@gmail.com) Received: by wx-out-0506.google.com with SMTP id i29so449006wxd.7 for ; Sun, 23 Dec 2007 15:42:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=azYCtZOSlsqLXs0nCFfKlwpbdPIXy8qNSTGq+J3X1AY=; b=wDEaWPKTtSeNX+MRvUrYQJH7L7g+cXLz71Mt0Anw0Nt7n91U9XXqjGMZTjfIOzB+crcTLad2207LZ5KcVm1ksIZ9PsTs8STAl4DqjI3w8FJPdofh5szvljDuH3horGLAsdoJ0iyJtljU0vtFYrzqyTcr21/uklHJGZAhYEMdXOs= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=KErAhygQ/8sCMXISY10s5+eIzJ622ZyyCsRDwJgiR1K+n2MOK5fWnq0YN8a4SwR6NAdec9+lfKH2gJOxY077VRma3rqZWxqX0NyisYqNcdxXu9VptXaspO51zYLZD39B96ijmlz3APRjYGCw4+CWl22EC7NO3PcdjGC7YsCW2UA= Received: by 10.70.53.1 with SMTP id b1mr1059326wxa.80.1198451713693; Sun, 23 Dec 2007 15:15:13 -0800 (PST) Received: from ?192.168.1.4? ( [24.229.62.9]) by mx.google.com with ESMTPS id i15sm5936371wxd.17.2007.12.23.15.15.11 (version=TLSv1/SSLv3 cipher=OTHER); Sun, 23 Dec 2007 15:15:12 -0800 (PST) From: Glen Barber To: freebsd-questions@freebsd.org Date: Sun, 23 Dec 2007 18:15:01 -0500 User-Agent: KMail/1.9.7 References: <476ECA9B.4090805@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> <476EE526.2000501@free.fr> In-Reply-To: <476EE526.2000501@free.fr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712231815.01734.glen.j.barber@gmail.com> Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 23 Dec 2007 23:42:52 -0000 On Sunday 23 December 2007 05:45:58 pm QADMOS wrote: -- Glen Barber (570)328-0318 From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 00:15:08 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AFCC916A500 for ; Mon, 24 Dec 2007 00:15:08 +0000 (UTC) (envelope-from jhorne@dfwlp.org) Received: from pollux.dfwlp.com (rrcs-64-183-212-244.sw.biz.rr.com [64.183.212.244]) by mx1.freebsd.org (Postfix) with ESMTP id 9155113C4D5 for ; Mon, 24 Dec 2007 00:15:08 +0000 (UTC) (envelope-from jhorne@dfwlp.org) Received: from miaplacidus.dfwlp.com (miaplacidus.dfwlp.com [192.168.125.80]) (authenticated bits=0) by pollux.dfwlp.com (8.13.8/8.13.8) with ESMTP id lBO0F3ud036179; Sun, 23 Dec 2007 18:15:03 -0600 (CST) (envelope-from jhorne@dfwlp.org) Message-ID: <476EFA07.4010306@dfwlp.org> Date: Sun, 23 Dec 2007 18:15:03 -0600 From: Jonathan Horne User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: QADMOS , freebsd-questions@freebsd.org References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> <476EDB8B.5060301@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> <476EE526.2000501@free.fr> In-Reply-To: <476EE526.2000501@free.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-4.4 required=3.6 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on pollux.dfwlp.com Cc: Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 00:15:08 -0000 QADMOS wrote: > Gelsema, P (Patrick) a écrit : >> On Sun, December 23, 2007 23:04, QADMOS wrote: >> >>> Jonathan Horne a écrit : >>> >>>> On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: >>>> >>>> >>>>> Hi everyone, >>>>> >>>>> i'm having a hard time with bind9. >>>>> >>>>> I'm trying to set up an authoritative dns server. >>>>> >>>>> Unfortunately when i try to launch it with an 'rndc start' i get this >>>>> >>>>> error message : >>>>> > rndc: connect failed: 127.0.0.1#953: connection refused >>>>> >>>>> I've reviewed my conf files but frankly i couldn't see what was >>>>> wrong. >>>>> I've actually rewritten them from scratch several times to really >>>>> check >>>>> that nothing was missing and couldn't see anything was wrong. The >>>>> localhost.rev file is configured correctly. I've also tried to >>>>> regenerate new rndc.keys and edit named.conf accordingly but to no >>>>> avail. >>>>> >>>>> I've also considered a possible file permissions in /etc/namedb >>>>> and in >>>>> /var/run/named issue but that didn't yield much either. >>>>> >>>>> Finally the biggest trouble is that nothing is logged in any log >>>>> file ! >>>>> nothing in /var/log/messages nothing in /var/log/all.log nothing >>>>> anywhere so i'm really confused here about what direction to >>>>> investigate. >>>>> >>>>> Has anyone ever encountered such an issue ? >>>>> >>>>> Thx in advance for any help. >>>>> >>>>> >>>> do you get same problem with: >>>> >>>> /etc/rc.d/named start >>>> >>>> ? >>>> >>>> >>>> >>> Well i've also tried that actually and when i do that : >>> 1/ nothing is logged >>> 2/ nothing is launched either >>> >> >> Do you have the following in rc.conf? >> >> hulk# cat /etc/rc.conf | grep named >> named_enable="YES" >> >> To me it seems your problem lies in the fact that named is not starting, >> so rndc can not control anything. >> >> Rgds, >> >> Patrick >> >> >>> there's just no error message despite that the named is not running >>> (checked with ps waux | grep named ) >>> > > Well Patrick i followed your suggestion and rebooted (it didn't do > much after just editing rc.conf) the box and now "/etc/rc.d/named > start" works fine annd named is running, 'rndc' still has the same > problem though (???) > > I'm a bit befuddled though, because i don't understand why it's > necessary to use the named_enable directive to have named running ? I > understand this is necessary if you want the daemon to run at boot > time but why is this necessary if you want to run it manually once the > box is on ? > > In any case thx a lot for your help :) the entries in the rc.conf are there for system security. [something] might be installed, but its not supposed to be allowed to run unless the system admin knows about it. otherwise, there is always 'forcestart' intead of 'start'. cheers, -- Jonathan Horne http://www.dfwlp.org jhorne@dfwlp.org From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 00:27:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1B23816A478 for ; Mon, 24 Dec 2007 00:27:52 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id 0C39013C4EB for ; Mon, 24 Dec 2007 00:27:51 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so2387178waf.3 for ; Sun, 23 Dec 2007 16:27:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=7B02at/i12v85iX8lKrg7jXi2qL336WD6O+qTYGhayo=; b=vY+Exqghto5yy0uQKF0pnajeqlXe+wZWd4vF8hm7GYWzi7++KeLZJRE+MWFMZz8OklJm5eW42HhIGZlJ1c4gE1o+1JqDI/eb/ayj57FQR69Qp2oSp3RKcdk5PCMkddh0DJJOyIer2Xtd6IeuyfGMdSF7EeJx9ooxTDzSxnfVwbk= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=TzDEKvoxgYhIIOyO1B6yzg9llxF16Kgr7f9HN4aXjPaAIcaZzEJ4pOG62yc2/7GEOrZDOkameR3qOH8LZSkBKb8oH94rfKE4GXJoOPIKs5XfHLxUxFggUqVhlSeHMYoDWlyTmsz6HsrE9aznF3oT+54/D436degeTVXV4p8ML50= Received: by 10.115.60.1 with SMTP id n1mr3058172wak.37.1198456070953; Sun, 23 Dec 2007 16:27:50 -0800 (PST) Received: by 10.114.47.12 with HTTP; Sun, 23 Dec 2007 16:27:50 -0800 (PST) Message-ID: <839aec700712231627k4457c65dx45791c76cd01b2fa@mail.gmail.com> Date: Sun, 23 Dec 2007 17:27:50 -0700 From: "Darren Spruell" To: QADMOS In-Reply-To: <476EE526.2000501@free.fr> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> <476EDB8B.5060301@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> <476EE526.2000501@free.fr> Cc: freebsd-questions@freebsd.org Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 00:27:52 -0000 On Dec 23, 2007 3:45 PM, QADMOS wrote: > Gelsema, P (Patrick) a =E9crit : > > > On Sun, December 23, 2007 23:04, QADMOS wrote: > > > >> Jonathan Horne a =E9crit : > >> > >>> On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: > >>> > >>> > >>>> Hi everyone, > >>>> > >>>> i'm having a hard time with bind9. > >>>> > >>>> I'm trying to set up an authoritative dns server. > >>>> > >>>> Unfortunately when i try to launch it with an 'rndc start' i get thi= s > >>>> > >>>> error message : > >>>> > rndc: connect failed: 127.0.0.1#953: connection refused > >>>> >>>> > >>> do you get same problem with: > >>> > >>> /etc/rc.d/named start > >>> > >> Well i've also tried that actually and when i do that : > >> 1/ nothing is logged > >> 2/ nothing is launched either > >> > > > > Do you have the following in rc.conf? > > > > hulk# cat /etc/rc.conf | grep named > > named_enable=3D"YES" > > > > To me it seems your problem lies in the fact that named is not starting= , > > so rndc can not control anything. > > > > Rgds, > > > > Patrick > > > > > >> there's just no error message despite that the named is not running > >> (checked with ps waux | grep named ) > >> > > Well Patrick i followed your suggestion and rebooted (it didn't do much > after just editing rc.conf) the box and now "/etc/rc.d/named start" > works fine annd named is running, 'rndc' still has the same problem > though (???) > > I'm a bit befuddled though, because i don't understand why it's > necessary to use the named_enable directive to have named running ? I > understand this is necessary if you want the daemon to run at boot time > but why is this necessary if you want to run it manually once the box is > on ? /etc/rc.d/named is the rc script to control (start, stop etc.) named, and this script is "inactive" unless you've specified that named is to be enabled using the named_enable variable. You can get around the need to activate the variable by prefixing your commands with the 'force' keyword (e.g. /etc/rc.d/named forcestart, etc.) Use sockstat(1) to figure out if the control port (953/tcp) is listening. 'sockstat -4l' should show a listener on 127.0.0.1:953. Also, 'start' is not a valid command to rndc. You would have a chicken and egg problem; if named has not been started, then there is no service to handle the start command to rndc. Use the rc script to start named and rndc to control its runtime operation. DS From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 01:08:33 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7513116A417 for ; Mon, 24 Dec 2007 01:08:33 +0000 (UTC) (envelope-from bv@bilver.wjv.com) Received: from wjv.com (fl-65-40-24-38.sta.embarqhsd.net [65.40.24.38]) by mx1.freebsd.org (Postfix) with ESMTP id 2659B13C468 for ; Mon, 24 Dec 2007 01:08:32 +0000 (UTC) (envelope-from bv@bilver.wjv.com) Received: from bilver.wjv.com (localhost.wjv.com [127.0.0.1]) by wjv.com (8.14.1/8.13.1) with ESMTP id lBO18Vfj007034 for ; Sun, 23 Dec 2007 20:08:31 -0500 (EST) (envelope-from bv@bilver.wjv.com) Received: (from bv@localhost) by bilver.wjv.com (8.14.1/8.13.1/Submit) id lBO18Qi1007033 for freebsd-questions@freebsd.org; Sun, 23 Dec 2007 20:08:26 -0500 (EST) (envelope-from bv) Date: Sun, 23 Dec 2007 20:08:26 -0500 From: Bill Vermillion To: freebsd-questions@freebsd.org Message-ID: <20071224010826.GB6840@wjv.com> References: <20071223234303.05F7416A4AB@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20071223234303.05F7416A4AB@hub.freebsd.org> User-Agent: Mutt/1.4.2.2i Organization: W.J.Vermillion / Orlando - Winter Park ReplyTo: bv@wjv.com Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: bv@wjv.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 01:08:33 -0000 Deep in the forest in the dark of night on Sun, Dec 23, 2007 at 23:43 with a cackle and an evil grin freebsd-questions-request@freebsd.org cast another eye of newt into the brew and chanted: > Date: Sun, 23 Dec 2007 08:43:13 -0500 (EST) > From: "Monah Baki" > Subject: Server crashes > Hi All, > I'm running a very old server (P3, dual 600Mhz, SCSI 9GB > harddrive). Applications that I run on it is MySQL and Apache. I > have no problem with server uptime but I am not able to update > because once I run the command: > make buildkernel KERNCONF=SMP > Server crashes here > mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c > aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c > echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm > cd /usr/src/sys/modules/aic7xxx/aicasm; > MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS > all > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > aicasm_gram.c > This happens everytime, is there anywhere I can look to see what's going > on, or if it's a hardware problem, where is the cause so I can replace. > Thanks You said things just stopped and you had to reboot. Often that is memory related and compiling the OS and kernel is one of the best ways to find bad memory :-(. It puts a stress on the machine that few other things will. Someone else asked if you could ping the machine. I have found that even when a machine is literaly dead you can still ping it, as the NIC cards seem not to notice that everything else is dead. I don't consdier a returned ping to be a test of much of anything. Bill -- Bill Vermillion - bv @ wjv . com From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 02:29:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AAFA816A417 for ; Mon, 24 Dec 2007 02:29:31 +0000 (UTC) (envelope-from bounces@nabble.com) Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158]) by mx1.freebsd.org (Postfix) with ESMTP id ACEBA13C442 for ; Mon, 24 Dec 2007 02:29:31 +0000 (UTC) (envelope-from bounces@nabble.com) Received: from isper.nabble.com ([192.168.236.156]) by kuber.nabble.com with esmtp (Exim 4.63) (envelope-from ) id 1J6d4N-00009q-3C for freebsd-questions@freebsd.org; Sun, 23 Dec 2007 18:29:31 -0800 Message-ID: <14484012.post@talk.nabble.com> Date: Sun, 23 Dec 2007 18:29:31 -0800 (PST) From: OpenBlanchy To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Nabble-From: dvdrom_box@yahoo.com Subject: Disable cdrom open/close buttons X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 02:29:31 -0000 My wife's dog keeps bumping into my file server and ejecting either one of the two cdrom trays. My concern is she will snap the trays off or steal/eat a cd inside the tray. My initial fix of getting rid of the dog was rejected so I'm coming here for a software solution. Basically, I was wondering if there's a setting, script, or even a program that will make it so the drive will only eject if I tell it to and the physical buttons are of no use. I run FreeBSD 6.2 without a gui. Thanks. -- View this message in context: http://www.nabble.com/Disable-cdrom-open-close-buttons-tp14484012p14484012.html Sent from the freebsd-questions mailing list archive at Nabble.com. From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 02:47:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B4A9C16A419 for ; Mon, 24 Dec 2007 02:47:09 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: from smtpgate1.pacific.net.sg (smtpgate1.pacific.net.sg [203.120.90.31]) by mx1.freebsd.org (Postfix) with SMTP id 1638713C455 for ; Mon, 24 Dec 2007 02:47:08 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: (qmail 6502 invoked from network); 24 Dec 2007 02:47:05 -0000 Received: from adsl2.dyn234.pacific.net.sg (HELO P2120.somewherefaraway.com) (oceanare@210.24.234.2) by smtpgate1.pacific.net.sg with ESMTPA; 24 Dec 2007 02:47:03 -0000 Message-ID: <476F1D9E.8010205@pacific.net.sg> Date: Mon, 24 Dec 2007 10:46:54 +0800 From: Erich Dollansky User-Agent: Thunderbird 2.0.0.6 (X11/20070826) MIME-Version: 1.0 To: Monah Baki References: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> In-Reply-To: <6516.67.100.188.210.1198417393.squirrel@www.geekisp.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Server crashes X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 02:47:09 -0000 Hi, if it is this easy to reproduce, go to the second or third console, start the compilation and switch to the first console. Do you get any error messages there? Also, do not run X while doing this. X is currently - depending on your graphics card - also a good candidate for crashes. Erich Monah Baki wrote: > Hi All, > > I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). > Applications that I run on it is MySQL and Apache. I have no problem with > server uptime but I am not able to update because once I run the command: > > make buildkernel KERNCONF=SMP > > Server crashes here > > mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c > aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c > echo aicasm: /usr/lib/libc.a /usr/lib/libl.a >> .depend_aicasm > cd /usr/src/sys/modules/aic7xxx/aicasm; > MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS > all > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c > cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. > -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c > aicasm_gram.c > > This happens everytime, is there anywhere I can look to see what's going > on, or if it's a hardware problem, where is the cause so I can replace. > > Thanks > > > > > BSD Networking, Microsoft Notworking > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 03:27:19 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 74F3F16A418 for ; Mon, 24 Dec 2007 03:27:19 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id 5749113C44B for ; Mon, 24 Dec 2007 03:27:19 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDESK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id lBO3RHZb061663; Sun, 23 Dec 2007 19:27:18 -0800 (PST) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Velja Kalik" , Date: Sun, 23 Dec 2007 19:28:32 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <425876.97873.qm@web31005.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 Importance: Normal Cc: Subject: RE: Realtek 8101E NIC and FreeBSD 4.11 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 03:27:19 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Velja Kalik > Sent: Saturday, December 22, 2007 12:29 PM > To: freebsd-questions@freebsd.org > Subject: Realtek 8101E NIC and FreeBSD 4.11 > > I guess all would be easy if I had used FreeBSD 5.x or 6.x, but > all nodes have to be 4.11 (comercial compiler on system for > FreeBSD 4.x) so its not like I can choose other verions :) NIC is > integrated Realtek 8101E (PCIEx). > > No reply from Bill Paul or Yves... > I would suggest you budget some money to pay a driver developer to back-port the NIC driver. Even then your going to have a bit of trouble finding someone to do it unless you are offering a lot of money. Unless you are doing this for some kind of mass-produced device, it would likely be cheaper to just disable the NIC and use a supported one. Ted From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 05:37:02 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8481816A41A for ; Mon, 24 Dec 2007 05:37:02 +0000 (UTC) (envelope-from jonathan+freebsd-questions@hst.org.za) Received: from hermes.hst.org.za (onix.hst.org.za [209.203.2.133]) by mx1.freebsd.org (Postfix) with ESMTP id A063E13C459 for ; Mon, 24 Dec 2007 05:37:00 +0000 (UTC) (envelope-from jonathan+freebsd-questions@hst.org.za) Received: from [10.1.11.1] ([10.1.11.1]) (authenticated bits=0) by hermes.hst.org.za (8.13.8/8.13.8) with ESMTP id lBO5WUXA021677 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Mon, 24 Dec 2007 07:32:32 +0200 (SAST) (envelope-from jonathan+freebsd-questions@hst.org.za) From: Jonathan McKeown To: freebsd-questions@freebsd.org Date: Mon, 24 Dec 2007 07:43:37 +0200 User-Agent: KMail/1.9.4 References: <476ECA9B.4090805@free.fr> <476EE526.2000501@free.fr> <839aec700712231627k4457c65dx45791c76cd01b2fa@mail.gmail.com> In-Reply-To: <839aec700712231627k4457c65dx45791c76cd01b2fa@mail.gmail.com> X-Face: $@VrUx^RHy/}yu]jKf/<4T%/d|F+$j-Ol2"2J$q+%OK1]&/G_S9(=?iso-8859-1?q?HkaQ*=60!=3FYOK=3FY!=27M=60C=0A=09aP=5C9nVPF8Q=7DCilHH8l?= =?iso-8859-1?q?=3B=7E!42HK6=273lg4J=7Daz?=@1Dqqh:J]M^"YPn*2IWrZON$1+G?oX3@ =?iso-8859-1?q?k=230=0A=0954XDRg=3DYn=5FF-etwot4U=24b?=dTS{i X-Spam-Score: -4.336 () ALL_TRUSTED,AWL,BAYES_00 X-Scanned-By: MIMEDefang 2.61 on 209.203.2.133 Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 05:37:02 -0000 On Monday 24 December 2007 02:15, Jonathan Horne wrote: > otherwise, there is always 'forcestart' intead of 'start'. and Darren Spruell wrote: > You can get around the need to activate the variable by=20 > prefixing your commands with the 'force' keyword (e.g. > /etc/rc.d/named forcestart, etc.)=20 To start a service which isn't enabled in rc.conf, it's better to use onestart =46rom the rc.subr(8) manpage: force Skip the checks for rcvar being set to ``YES'', and sets rc_force=3DYES. This ignores argument_precmd returning non-zero, and ignores any of the required_* tests failing, and always returns a zero exit status. one Skip the checks for rcvar being set to ``YES'', but performs all the other prerequisite tests. Jonathan From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 06:23:21 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 48DB516A418 for ; Mon, 24 Dec 2007 06:23:21 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id 03E2213C442 for ; Mon, 24 Dec 2007 06:23:20 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so2571541waf.3 for ; Sun, 23 Dec 2007 22:23:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=i5fj0aI9cMzE1VCKveHuTpcXyFvCPPui6tN1M1fRG94=; b=ONqsLWJYR4fZuqLVmTGTjUN8oFKFanE+U00jEQwNnDNafvjJFN7cSF9eBwcXw70+u3zHv0TWmHMuOc0ztcRjn8lBewFxv55na4lMs5Okg7Hg5xqc4DCJ8ENJ0J2YYHuQrw3hNoZQ03CfFTSrHhHwGvMdbTBNVe2Dk1PdXQEhC4M= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=owA8tdA2lEQhYsQnDOLrBbha+uG158ya+5Dwz0BrIDkYbzSlQ7XSrfTBtXiQQ3k6+TJVR5SvV8MHaTQvGhtEF2zfXqzFx/Q0YY6tkoku+fr5H+01a4yhRQzO3Nm2e++0e4/DeDDP1RQVc/8N+Iqin95gLQka1xuufgVBiXFuxew= Received: by 10.114.190.6 with SMTP id n6mr3372353waf.51.1198477398897; Sun, 23 Dec 2007 22:23:18 -0800 (PST) Received: by 10.114.47.12 with HTTP; Sun, 23 Dec 2007 22:23:18 -0800 (PST) Message-ID: <839aec700712232223h7e7cbb6kad67f8ff7368962b@mail.gmail.com> Date: Sun, 23 Dec 2007 23:23:18 -0700 From: "Darren Spruell" To: "Jonathan McKeown" In-Reply-To: <200712240743.37582.jonathan+freebsd-questions@hst.org.za> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <476ECA9B.4090805@free.fr> <476EE526.2000501@free.fr> <839aec700712231627k4457c65dx45791c76cd01b2fa@mail.gmail.com> <200712240743.37582.jonathan+freebsd-questions@hst.org.za> Cc: freebsd-questions@freebsd.org Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 06:23:21 -0000 On Dec 23, 2007 10:43 PM, Jonathan McKeown wrote: > On Monday 24 December 2007 02:15, Jonathan Horne wrote: > > > otherwise, there is always 'forcestart' intead of 'start'. > > and Darren Spruell wrote: > > > You can get around the need to activate the variable by > > prefixing your commands with the 'force' keyword (e.g. > > /etc/rc.d/named forcestart, etc.) > > To start a service which isn't enabled in rc.conf, it's better to use > > onestart > > From the rc.subr(8) manpage: > > force Skip the checks for rcvar being set to ``YES'', and > sets rc_force=YES. This ignores argument_precmd > returning non-zero, and ignores any of the required_* > tests failing, and always returns a zero exit status. > > one Skip the checks for rcvar being set to ``YES'', but > performs all the other prerequisite tests. Good to know, thx. DS From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 08:38:01 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F1EBE16A419 for ; Mon, 24 Dec 2007 08:38:01 +0000 (UTC) (envelope-from bernt@bah.homeip.net) Received: from feeder.usenet4all.se (1-1-1-38a.far.sth.bostream.se [82.182.32.53]) by mx1.freebsd.org (Postfix) with ESMTP id 5EA3813C4CE for ; Mon, 24 Dec 2007 08:38:00 +0000 (UTC) (envelope-from bernt@bah.homeip.net) Received: from [80.217.93.243] (c80-217-93-243.bredband.comhem.se [80.217.93.243]) by feeder.usenet4all.se (8.13.1/8.13.1) with ESMTP id lBO8bvgB094545; Mon, 24 Dec 2007 09:37:58 +0100 (CET) (envelope-from bernt@bah.homeip.net) Message-ID: <476F6FC7.5040407@bah.homeip.net> Date: Mon, 24 Dec 2007 09:37:27 +0100 From: B H User-Agent: Mozilla/5.0 (X11; U; FreeBSD-6.2-STABLE; sv-SE) MIME-Version: 1.0 To: OpenBlanchy References: <14484012.post@talk.nabble.com> In-Reply-To: <14484012.post@talk.nabble.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Disable cdrom open/close buttons X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 08:38:02 -0000 OpenBlanchy skrev: > My wife's dog keeps bumping into my file server and ejecting either one of > the two cdrom trays. My concern is she will snap the trays off or steal/eat > a cd inside the tray. My initial fix of getting rid of the dog was rejected > so I'm coming here for a software solution. > > Basically, I was wondering if there's a setting, script, or even a program > that will make it so the drive will only eject if I tell it to and the > physical buttons are of no use. Mount the cd. > I run FreeBSD 6.2 without a gui. Thanks. From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 10:29:30 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9018016A418 for ; Mon, 24 Dec 2007 10:29:30 +0000 (UTC) (envelope-from manikandan.x.balachandran@jpmchase.com) Received: from sb5.jpmchase.com (mailms.chase.com [170.148.48.205]) by mx1.freebsd.org (Postfix) with ESMTP id 4056813C467 for ; Mon, 24 Dec 2007 10:29:29 +0000 (UTC) (envelope-from manikandan.x.balachandran@jpmchase.com) Received: from si12.svr.bankone.net (internalhost.FCNBD.com [155.180.56.113] (may be forged)) by sb5.jpmchase.com (Switch-3.1.8/Switch-3.1.7) with ESMTP id lBOATSdx019351 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=FAIL) for ; Mon, 24 Dec 2007 05:29:29 -0500 Received: from svr.bankone.net ([172.18.0.50]) by si12.svr.bankone.net (Switch-3.1.8/Switch-3.1.7) with ESMTP id lBOAS1Bj006910 for ; Mon, 24 Dec 2007 05:28:01 -0500 Received: from ([10.246.2.175]) by imj2.svr.bankone.net with ESMTP id KP-BRCGF.55068684; Mon, 24 Dec 2007 04:27:11 -0600 In-Reply-To: <476BCF45.3020007@otenet.gr> To: Manolis Kiagias MIME-Version: 1.0 X-Mailer: Lotus Notes Release 6.5.4 CCH5 September 12, 2005 Message-ID: From: manikandan.x.balachandran@jpmchase.com Date: Mon, 24 Dec 2007 10:27:08 +0000 X-MIMETrack: Serialize by Router on MIUSCC006/JPMCHASE(Release 6.5.6FP1|April 24, 2007) at 12/24/2007 05:27:11 AM, Serialize complete at 12/24/2007 05:27:11 AM Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Customized FreeBSD CD (was: Can I install Free BSD latest version on my laptop with dual boot?) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 10:29:30 -0000 Thank you=0D=0A=0D=0AManikandan Balachandran=0D=0AJPMC IB T&O - Jupiter STS= =0D=0ATel: +44 1202-325271=0D=0ACell: +44 7891649680 =0D=0AEmail: manikanda= n=2Ex=2Ebalachandran@jpmchase=2Ecom=0D=0A----------------------------------= -------------------------=0D=0AJPMorgan Chase, 18 Christchurch Road=0D=0AFl= oor 1, Bournemouth, BH1 3BA , UK=0D=0A-------------------------------------= -----------------------=0D=0A=0D=0A=0D=0A=0D=0A=0D=0AManolis Kiagias =0D=0A21/12/2007 02:35 PM=0D=0A =0D=0A To: manikan= dan=2Ex=2Ebalachandran@jpmchase=2Ecom=0D=0A cc: freebsd-question= s@freebsd=2Eorg=0D=0A Subject: Re: Customized FreeBSD CD (was= : Can I install Free =0D=0ABSD latest version on my laptop with dual boo= t?)=0D=0A=0D=0A=0D=0Amanikandan=2Ex=2Ebalachandran@jpmchase=2Ecom wrote:=0D= =0A>=0D=0A> Hi,=0D=0A>=0D=0A> Thanks for your immediate response=0D=0A>=0D= =0A> Yes, I spend two days and found out there are lot of tips in your=0D= =0A> documentation thanks?=0D=0A>=0D=0A> After compiling the Free BSD Kerne= l and making some changes on my=0D=0A> system then how do I make the instal= lable CD/DVD from my source (My=0D=0A> Free BSD) to distribute to others?= =0D=0A>=0D=0A> One more question: Can I use ZFS on Free BSD?=0D=0A>=0D=0A> = Cheers,=0D=0A> B=2EManikandan=0D=0A> Bournemouth, UK=0D=0A> ---------------= ---------------------------------------------=0D=0A>=0D=0APlease do not top= post=2E=0D=0A=0D=0AThere are couple of ways to create a custom FreeBSD CD = and you will find=0D=0Athem by simply googling=2E I have not tried any, but= this one looks =0D=0Apromising:=0D=0A=0D=0Ahttp://livecd=2Esourceforge=2En= et/documentos=2Ephp=0D=0A=0D=0AIt is available in the ports collection too:= /usr/ports/sysutils/livecd=0D=0A=0D=0AZFS will be available on FreeBSD 7= =2E=0D=0A=0D=0A=0D=0A=0D=0A-----------------------------------------=0D=0AT= his communication is for informational purposes only=2E It is not=0Aintende= d as an offer or solicitation for the purchase or sale of=0Aany financial i= nstrument or as an official confirmation of any=0Atransaction=2E All market= prices, data and other information are not=0Awarranted as to completeness = or accuracy and are subject to change=0Awithout notice=2E Any comments or s= tatements made herein do not=0Anecessarily reflect those of JPMorgan Chase = & Co=2E, its subsidiaries=0Aand affiliates=2E=0D=0A=0D=0AThis transmission = may contain information that is privileged,=0Aconfidential, legally privile= ged, and/or exempt from disclosure=0Aunder applicable law=2E If you are not= the intended recipient, you=0Aare hereby notified that any disclosure, cop= ying, distribution, or=0Ause of the information contained herein (including= any reliance=0Athereon) is STRICTLY PROHIBITED=2E Although this transmissi= on and any=0Aattachments are believed to be free of any virus or other defe= ct=0Athat might affect any computer system into which it is received and=0A= opened, it is the responsibility of the recipient to ensure that it=0Ais vi= rus free and no responsibility is accepted by JPMorgan Chase &=0ACo=2E, its= subsidiaries and affiliates, as applicable, for any loss=0Aor damage arisi= ng in any way from its use=2E If you received this=0Atransmission in error,= please immediately contact the sender and=0Adestroy the material in its en= tirety, whether in electronic or hard=0Acopy format=2E Thank you=2E=0D=0A= =0D=0APlease refer to http://www=2Ejpmorgan=2Ecom/pages/disclosures for=0Ad= isclosures relating to UK legal entities=2E From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 10:54:55 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F04A916A41B for ; Mon, 24 Dec 2007 10:54:55 +0000 (UTC) (envelope-from bo-b0x3gu1az7gjxjapp6jgmaa8jb0xfd@b.email.getmeaticket.co.uk) Received: from mta502.email.getmeaticket.co.uk (mta502.email.getmeaticket.co.uk [207.251.70.98]) by mx1.freebsd.org (Postfix) with SMTP id F232213C474 for ; Mon, 24 Dec 2007 10:54:54 +0000 (UTC) (envelope-from bo-b0x3gu1az7gjxjapp6jgmaa8jb0xfd@b.email.getmeaticket.co.uk) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=200505; d=email.getmeaticket.co.uk; b=cOgD6Xaxpef4X0aTcAxT8gNNqnAk6cOWmsNGTNcKtyLzvl4eKmHV1JPL9EaewukD5YJyKNwWFmVhClVGH3kbPLOwdGMVMnUKH0QzwL/rCCUnUQM2P5rJCfX98z77/LDP74FOcI4ZJ78++DbNVyYa8fGEIO9GPqWjjVVelP0BiHQ=; h=Date:Message-ID:List-Unsubscribe:From:To:Subject:MIME-Version:Reply-To:Content-type; Date: Mon, 24 Dec 2007 10:55:15 -0000 Message-ID: From: =?iso-8859-1?q?Get_Me_A_Ticket?= To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Philbert Mang, get your ticket to win today X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?iso-8859-1?q?Get_Me_A_Ticket?= List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 10:54:56 -0000 If you are having problems viewing this electronic mail please try here : http://email.getmeaticket.co.uk/a/tBHb4yDAdT41pBLHJcoBpAZgMli/mailer Please add support@email.getmeaticket.co.uk to your address book http://email.getmeaticket.co.uk/a/tBHb4yDAdT41pBLHJcoBpAZgMli/comps?EMAIL=questions@freebsd.org&ADDRESS=j29q8Bd85 Dear Philbert, Thank you for joining Get Me A Ticket. You are only one click away from entering many fantastic prize draw competitions absolutely free, all you have to do is click on the link above. http://email.getmeaticket.co.uk/a/tBHb4yDAdT41pBLHJcoBpAZgMli/comps?EMAIL=questions@freebsd.org&ADDRESS=j29q8Bd85 You have received this electronic mail because you are a registered user on the Get Me A Ticket website. If you would like to stop receiving this electronic mail directly from us please send an email to unsubscribe : mailto:rm-0b0x3gu1az7gjxjapp6jgmaa8jb0xfd@email.getmeaticket.co.uk Getmeaticket practices permission based marketing. Get Me A Ticket is a part of Lifestyles Online Limited Lifestyles Online Limited. Registered Office: Gold Building, Bath and West Buildings, Lower Bristol Road, Bath, BA2 3EG. Registered Number: 5373447 (England and Wales). From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 13:50:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DA2D216A420 for ; Mon, 24 Dec 2007 13:50:34 +0000 (UTC) (envelope-from ml@netfence.it) Received: from parrot.aev.net (parrot.aev.net [212.31.247.179]) by mx1.freebsd.org (Postfix) with ESMTP id 1F9DF13C461 for ; Mon, 24 Dec 2007 13:50:33 +0000 (UTC) (envelope-from ml@netfence.it) Received: from soth.ventu ([151.77.240.163]) (authenticated bits=128) by parrot.aev.net (8.14.2/8.13.8) with ESMTP id lBODqfEi092539 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=FAIL) for ; Mon, 24 Dec 2007 14:52:48 +0100 (CET) (envelope-from ml@netfence.it) Received: from alamar.ventu (alamar.ventu [10.1.2.18]) by soth.ventu (8.14.2/8.13.8) with ESMTP id lBODqNfX040585; Mon, 24 Dec 2007 14:52:24 +0100 (CET) (envelope-from ml@netfence.it) Message-ID: <476FB919.1080500@netfence.it> Date: Mon, 24 Dec 2007 14:50:17 +0100 From: Andrea Venturoli User-Agent: Thunderbird 2.0.0.9 (X11/20071116) MIME-Version: 1.0 To: Cristian KLEIN References: <47469D3F.1070207@netfence.it> <474AA3E4.7020807@net.utcluj.ro> <4766EF3D.6030807@netfence.it> <4767185D.6040007@net.utcluj.ro> In-Reply-To: <4767185D.6040007@net.utcluj.ro> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.63 on 212.31.247.179 Cc: freebsd-questions@freebsd.org Subject: Re: portaudit in periodic [SOLVED] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 13:50:34 -0000 Cristian KLEIN ha scritto: > But have you tried running these commands from the shell? It is very important > to check the scripts with the above SHELL & PATH environment. If the above works > from the shell, I'm pretty much out of ideas too. Yes, and it did work. In the end I realized the problem was that I have to use a proxy: from the shell portaudit picked up HTTP_PROXY and FTP_PROXY from the environment, while it didn't when launched from cron. Obiously setting up portaudit.conf was the solution. bye & Thanks av. From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 14:00:05 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4AA3316A41A for ; Mon, 24 Dec 2007 14:00:05 +0000 (UTC) (envelope-from vcrobe@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id 1192013C448 for ; Mon, 24 Dec 2007 14:00:05 +0000 (UTC) (envelope-from vcrobe@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so2804587waf.3 for ; Mon, 24 Dec 2007 06:00:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=bS9sMbQ/hlH6Vdn4k4pq3G+OVh6JSj4ed197I0tFDDw=; b=LqEAZkqXaRMSKhvN6ECDBngZ237MzlfxhQtKk8XpQK9uUx1DzG74TZiC+CGzUkA7hBI4cZOC7Oycm0eqBLXv67L+j34DbD+3przolqOAMa+T8HC/Tintl/8hTm09QNVxDDLO4ijhXdfg4ND63TSSfHHZ4H26047qQBf6/Ujq56M= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=T8cRINlCcTueuurtP0LaGlDRnRvt9900GzTuKXFs79NDap6VBUOhq3rYVlyoEY5eWq2ua0Kf60smeHBXhTyy61AflYuQTB/ECf35CvX5GA6gRUnwQMAEap3p1F3mB2vcYOAh2llszcmPpDcWmCdAuS9XMbGg9jhTK5sFyrwPXog= Received: by 10.143.33.19 with SMTP id l19mr1395845wfj.85.1198504804898; Mon, 24 Dec 2007 06:00:04 -0800 (PST) Received: by 10.143.165.12 with HTTP; Mon, 24 Dec 2007 06:00:04 -0800 (PST) Message-ID: <221c791e0712240600p56abac39i9d4644e9138e424@mail.gmail.com> Date: Mon, 24 Dec 2007 09:00:04 -0500 From: Robe To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=WINDOWS-1252 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Upgrading firefox 1.5 to 2.0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 14:00:05 -0000 Hi, I'm using FreeBSD v6.2. It comes with FireFox 1.5 and I want to upgrade it to version 2.0. I've updated my ports collection with pkg_version -v. But I don't see the FireFox 2.0 in my ports. However I see a port for FireFox 2 in the ports collection in the web site of FreeBSD. Isn't supposed that it must appear i= n my ports collection once I've updated it? Then I try with portupgrade =96R firefox and I get the following message: Stale dependency: firefox-1.5.0.8,1 --> perl-5.8.8_1 =96 manually run 'pkgd= b =96F' to fix (-0 disallowed when =96R is given). Can someone help me? Thanks, --=20 Robe. En el verdadero amor, el alma oculta al cuerpo. From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 14:43:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9679C16A417 for ; Mon, 24 Dec 2007 14:43:15 +0000 (UTC) (envelope-from developer@rucci.org) Received: from mta1.srv.hcvlny.cv.net (mta1.srv.hcvlny.cv.net [167.206.4.196]) by mx1.freebsd.org (Postfix) with ESMTP id 6219813C448 for ; Mon, 24 Dec 2007 14:43:15 +0000 (UTC) (envelope-from developer@rucci.org) Received: from smurfbsd.warganizer.com (ool-182dc652.dyn.optonline.net [24.45.198.82]) by mta1.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTK00MUE4TXUUT0@mta1.srv.hcvlny.cv.net> for freebsd-questions@freebsd.org; Mon, 24 Dec 2007 09:13:09 -0500 (EST) Date: Mon, 24 Dec 2007 09:16:28 +0000 From: Daniel Rucci To: freebsd-questions@freebsd.org Message-id: <476F78EC.6070507@rucci.org> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT User-Agent: Thunderbird 2.0.0.9 (X11/20071117) Subject: mount & ntfs-3g X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 14:43:15 -0000 Hi, I'm trying to mount an ntfs-3g partition but get an error when using mount. mount -t ntfs-3g /dev/ad6s1 /win mount: /dev/ad6s1 : Operation not supported by device if i use mount_ntfs-3g ... it works fine but that won't help me with respect to mounting during boot. Is there anything special that needs to be done to get a non standard mount_* command to work via mount? I read somewhere to add a symlink to mount_ntfs-3g to /sbin/ but that did not seem to do anything. Thanks, Dan From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 14:57:32 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 86E9D16A41A for ; Mon, 24 Dec 2007 14:57:32 +0000 (UTC) (envelope-from alainfabry@belgacom.net) Received: from mailrelay011.isp.belgacom.be (mailrelay011.isp.belgacom.be [195.238.6.178]) by mx1.freebsd.org (Postfix) with ESMTP id 17A0B13C468 for ; Mon, 24 Dec 2007 14:57:31 +0000 (UTC) (envelope-from alainfabry@belgacom.net) X-Belgacom-Dynamic: yes Received: from 245.109-247-81.adsl-dyn.isp.belgacom.be (HELO belgacom.net) ([81.247.109.245]) by relay.skynet.be with ESMTP; 24 Dec 2007 15:57:26 +0100 Date: Mon, 24 Dec 2007 15:54:38 +0100 From: "Alain G. Fabry" To: freebsd-questions@freebsd.org Message-ID: <20071224145438.GA77369@ducati-748.3rdrock.kicks-ass.net> References: <221c791e0712240600p56abac39i9d4644e9138e424@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <221c791e0712240600p56abac39i9d4644e9138e424@mail.gmail.com> User-Agent: Mutt/1.4.2.1i Subject: Re: Upgrading firefox 1.5 to 2.0 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 14:57:32 -0000 On Mon, Dec 24, 2007 at 09:00:04AM -0500, Robe wrote: > Hi, > > I'm using FreeBSD v6.2. It comes with FireFox 1.5 and I want to upgrade it > to version 2.0. > > I've updated my ports collection with pkg_version -v. But I don't see the > FireFox 2.0 in my ports. However I see a port for FireFox 2 in the ports > collection in the web site of FreeBSD. Isn't supposed that it must appear in > my ports collection once I've updated it? > > Then I try with portupgrade ?R firefox and I get the following message: > > Stale dependency: firefox-1.5.0.8,1 --> perl-5.8.8_1 ? manually run 'pkgdb > ?F' to fix (-0 disallowed when ?R is given). > > Can someone help me? > Look in man at following commands -> update your ports portsnap fetch update -> verify outdated installed ports portversion -l "<" -> upgrade port portupgrade -R port -> update your pkgdb with new dependancies pkgdb -F Hope this helps > Thanks, > > -- > Robe. > > En el verdadero amor, el alma oculta al cuerpo. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 16:05:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 576BE16A420 for ; Mon, 24 Dec 2007 16:05:49 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from pollux.dfwlp.com (rrcs-64-183-212-244.sw.biz.rr.com [64.183.212.244]) by mx1.freebsd.org (Postfix) with ESMTP id F1D9013C45A for ; Mon, 24 Dec 2007 16:05:48 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from athena.dfwlp.com (athena.dfwlp.com [192.168.125.82]) (authenticated bits=0) by pollux.dfwlp.com (8.13.8/8.13.8) with ESMTP id lBOG5kAb054437 for ; Mon, 24 Dec 2007 10:05:46 -0600 (CST) (envelope-from freebsd@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Mon, 24 Dec 2007 10:05:45 -0600 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712241005.45959.freebsd@dfwlp.com> X-Spam-Status: No, score=-4.4 required=3.6 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on pollux.dfwlp.com Subject: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 16:05:49 -0000 i have been wanting to set up the ability to open an entirely new x session to another box, in a window of my currently running session. xnest is one way of doing this, but i was wondering if there are any others (perhaps, a little easier to configure and get going) ? cheers, -- Jonathan Horne http://dfwlpiki.dfwlp.org freebsd@dfwlp.com From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 16:29:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0F59116A468 for ; Mon, 24 Dec 2007 16:29:09 +0000 (UTC) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: from gizmo.acns.msu.edu (gizmo.acns.msu.edu [35.8.1.43]) by mx1.freebsd.org (Postfix) with ESMTP id B45F013C4EA for ; Mon, 24 Dec 2007 16:29:08 +0000 (UTC) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: from gizmo.acns.msu.edu (localhost [127.0.0.1]) by gizmo.acns.msu.edu (8.13.6/8.13.6) with ESMTP id lBOGS2Yc067540; Mon, 24 Dec 2007 11:28:02 -0500 (EST) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: (from jerrymc@localhost) by gizmo.acns.msu.edu (8.13.6/8.13.6/Submit) id lBOGS1IT067539; Mon, 24 Dec 2007 11:28:01 -0500 (EST) (envelope-from jerrymc) Date: Mon, 24 Dec 2007 11:28:01 -0500 From: Jerry McAllister To: Julian Bolivar Message-ID: <20071224162801.GB67475@gizmo.acns.msu.edu> References: <476DD439.3060405@cantv.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <476DD439.3060405@cantv.net> User-Agent: Mutt/1.4.2.2i Cc: User Questions Subject: Re: FreeBSD 6.3 or 7.0 Release? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 16:29:09 -0000 On Sat, Dec 22, 2007 at 10:51:29PM -0430, Julian Bolivar wrote: > Hi everyone, > > Mi question is because checking the FreeBSD 6.3 and 7.0 Release schedule, > I note that version 6.3 is upcoming and few days later 7.0 will be > releaced, anyone know if this schedule is updated or is in time? or only > one of both will be released? Yhe are not "scheduled" dates but rather are estimates made based on how it appears things are progressing. You might call them 'best guesses'. FreeBSD does not make release "schedules" per se. I am guessing from discussion that was posted a couple of weeks ago, that the actual releases will be a couple of weeks or so past those estimates, but it sounds like things are getting pretty close. ////jerry > > Thanks and Regards, > > ----------------------- > Julian Bolivar > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 16:38:39 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0B42E16A41B for ; Mon, 24 Dec 2007 16:38:39 +0000 (UTC) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: from gizmo.acns.msu.edu (gizmo.acns.msu.edu [35.8.1.43]) by mx1.freebsd.org (Postfix) with ESMTP id A68FA13C4D5 for ; Mon, 24 Dec 2007 16:38:38 +0000 (UTC) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: from gizmo.acns.msu.edu (localhost [127.0.0.1]) by gizmo.acns.msu.edu (8.13.6/8.13.6) with ESMTP id lBOGbWqe067570; Mon, 24 Dec 2007 11:37:32 -0500 (EST) (envelope-from jerrymc@gizmo.acns.msu.edu) Received: (from jerrymc@localhost) by gizmo.acns.msu.edu (8.13.6/8.13.6/Submit) id lBOGbW22067569; Mon, 24 Dec 2007 11:37:32 -0500 (EST) (envelope-from jerrymc) Date: Mon, 24 Dec 2007 11:37:32 -0500 From: Jerry McAllister To: QADMOS Message-ID: <20071224163732.GC67475@gizmo.acns.msu.edu> References: <476ECA9B.4090805@free.fr> <200712231548.14320.freebsd@dfwlp.com> <476EDB8B.5060301@free.fr> <1642.10.202.77.197.1198448071.squirrel@webmail.superhero.nl> <476EE526.2000501@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <476EE526.2000501@free.fr> User-Agent: Mutt/1.4.2.2i Cc: freebsd-questions@freebsd.org Subject: Re: BIND9 won't start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 16:38:39 -0000 On Sun, Dec 23, 2007 at 11:45:58PM +0100, QADMOS wrote: > Gelsema, P (Patrick) a écrit : > >On Sun, December 23, 2007 23:04, QADMOS wrote: > > > >>Jonathan Horne a écrit : > >> > >>>On Sunday 23 December 2007 02:52:43 pm QADMOS wrote: > >>> > >>> > >>>>Hi everyone, > >>>> > >>>>i'm having a hard time with bind9. > >>>> > >>>>I'm trying to set up an authoritative dns server. > >>>> > >>>>Unfortunately when i try to launch it with an 'rndc start' i get this > >>>> > >>>>error message : > >>>> > rndc: connect failed: 127.0.0.1#953: connection refused > >>>> > >>>>I've reviewed my conf files but frankly i couldn't see what was wrong. > >>>>I've actually rewritten them from scratch several times to really check > >>>>that nothing was missing and couldn't see anything was wrong. The > >>>>localhost.rev file is configured correctly. I've also tried to > >>>>regenerate new rndc.keys and edit named.conf accordingly but to no > >>>>avail. > >>>> > >>>>I've also considered a possible file permissions in /etc/namedb and in > >>>>/var/run/named issue but that didn't yield much either. > >>>> > >>>>Finally the biggest trouble is that nothing is logged in any log file ! > >>>>nothing in /var/log/messages nothing in /var/log/all.log nothing > >>>>anywhere so i'm really confused here about what direction to > >>>>investigate. > >>>> > >>>>Has anyone ever encountered such an issue ? > >>>> > >>>>Thx in advance for any help. > >>>> > >>>> > >>>do you get same problem with: > >>> > >>>/etc/rc.d/named start > >>> > >>>? > >>> > >>> > >>> > >>Well i've also tried that actually and when i do that : > >>1/ nothing is logged > >>2/ nothing is launched either > >> > > > >Do you have the following in rc.conf? > > > >hulk# cat /etc/rc.conf | grep named > >named_enable="YES" > > > >To me it seems your problem lies in the fact that named is not starting, > >so rndc can not control anything. > > > >Rgds, > > > >Patrick > > > > > >>there's just no error message despite that the named is not running > >>(checked with ps waux | grep named ) > >> > > Well Patrick i followed your suggestion and rebooted (it didn't do much > after just editing rc.conf) the box and now "/etc/rc.d/named start" > works fine annd named is running, 'rndc' still has the same problem > though (???) > > I'm a bit befuddled though, because i don't understand why it's > necessary to use the named_enable directive to have named running ? I > understand this is necessary if you want the daemon to run at boot time > but why is this necessary if you want to run it manually once the box is > on ? Well, if you use the rc script or any of the other scripts that might be supplied with it to start it, then that script checks that variable - namely 'named_enable' and if it is not set, the script exits without doing anything. ////jerry > > In any case thx a lot for your help :) > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 19:11:13 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BEA1616A417 for ; Mon, 24 Dec 2007 19:11:13 +0000 (UTC) (envelope-from jeremy.gransden@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id 7B4CF13C4CC for ; Mon, 24 Dec 2007 19:11:13 +0000 (UTC) (envelope-from jeremy.gransden@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so2960462waf.3 for ; Mon, 24 Dec 2007 11:11:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; bh=WZZaPJf88BQLok2ikmyUYap4l6b36lNdj1mjduutjrE=; b=TIVOzw9nKAtTQGcslUgwMnXCBLQUKwuzsn7YNcjeOl6+h4s5CcPCmnOoDk7ccS332Xdz5FVIt9wUSHlqLOztf1DOuQKvHOcqgfNFgpBZSbRTNeD7+c0jNDvzWS0WBlui5XokzdlnamLhNRfPkTx88ecTrq0cKqdXu/weYxqdhZo= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=hhNVnBaUcP2RDt3Fm7m72M7I8b7dOa1fpKcWWy7KiYOA7YsFKF8SMvCqs4ytTyD2gYNCTuBr6Qkc3heeeal39FtBFmrg1M0c8GXDynDn46n4plZ5i80s1yzH4pvERNCxVErR0s95CKOkV2mzRfK9NsWKg3BIFPV5y8aBf3MCJno= Received: by 10.115.22.1 with SMTP id z1mr4441057wai.48.1198523472052; Mon, 24 Dec 2007 11:11:12 -0800 (PST) Received: by 10.115.91.9 with HTTP; Mon, 24 Dec 2007 11:11:12 -0800 (PST) Message-ID: <87f7f4170712241111t157ad17cpf1c756f6db178d24@mail.gmail.com> Date: Mon, 24 Dec 2007 14:11:12 -0500 From: "Jeremy Gransden" To: "Jonathan Horne" In-Reply-To: <200712241005.45959.freebsd@dfwlp.com> MIME-Version: 1.0 References: <200712241005.45959.freebsd@dfwlp.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 19:11:13 -0000 On 12/24/07, Jonathan Horne wrote: > > i have been wanting to set up the ability to open an entirely new x > session to > another box, in a window of my currently running session. xnest is one > way > of doing this, but i was wondering if there are any others (perhaps, a > little > easier to configure and get going) ? > > cheers, > -- > Jonathan Horne > http://dfwlpiki.dfwlp.org > freebsd@dfwlp.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > Can you forward X through ssh? Or is that not what you are looking for? thanks, j From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 19:16:24 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 93C9416A419 for ; Mon, 24 Dec 2007 19:16:24 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from pollux.dfwlp.com (rrcs-64-183-212-244.sw.biz.rr.com [64.183.212.244]) by mx1.freebsd.org (Postfix) with ESMTP id 4DFB713C448 for ; Mon, 24 Dec 2007 19:16:24 +0000 (UTC) (envelope-from freebsd@dfwlp.com) Received: from athena.dfwlp.com (athena.dfwlp.com [192.168.125.82]) (authenticated bits=0) by pollux.dfwlp.com (8.13.8/8.13.8) with ESMTP id lBOJGMcG057979 for ; Mon, 24 Dec 2007 13:16:22 -0600 (CST) (envelope-from freebsd@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Mon, 24 Dec 2007 13:16:22 -0600 User-Agent: KMail/1.9.7 References: <200712241005.45959.freebsd@dfwlp.com> <87f7f4170712241111t157ad17cpf1c756f6db178d24@mail.gmail.com> In-Reply-To: <87f7f4170712241111t157ad17cpf1c756f6db178d24@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712241316.22157.freebsd@dfwlp.com> X-Spam-Status: No, score=-4.4 required=3.6 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on pollux.dfwlp.com Subject: Re: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 19:16:24 -0000 On Monday 24 December 2007 01:11:12 pm Jeremy Gransden wrote: > On 12/24/07, Jonathan Horne wrote: > > i have been wanting to set up the ability to open an entirely new x > > session to > > another box, in a window of my currently running session. xnest is one > > way > > of doing this, but i was wondering if there are any others (perhaps, a > > little > > easier to configure and get going) ? > > > > cheers, > > -- > > Jonathan Horne > > http://dfwlpiki.dfwlp.org > > freebsd@dfwlp.com > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to " > > freebsd-questions-unsubscribe@freebsd.org" > > Can you forward X through ssh? Or is that not what you are looking for? > > > thanks, > j > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" i did finally get ssh to forwared X, but it only worked with ssh -Y [host] im not sure yet why ssh -X doesnt work, but ive not yet finished reading about the ins and outs of what security settings im overriding with the -Y. i was able to start xclock as a test. but what i would really like to be able to accomplish, would be to get the entire 'startx' to work over an ssh session, and have it open as another window on my desktop. cheers, -- Jonathan Horne http://dfwlpiki.dfwlp.org freebsd@dfwlp.com From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 21:02:44 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E295616A417 for ; Mon, 24 Dec 2007 21:02:43 +0000 (UTC) (envelope-from bahamasfranks@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id AA8BD13C465 for ; Mon, 24 Dec 2007 21:02:43 +0000 (UTC) (envelope-from bahamasfranks@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so3019219waf.3 for ; Mon, 24 Dec 2007 13:02:43 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:reply-to:sender:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; bh=mYv16uisQdIwj9LTcYP38l1rHnXmz8Q8sTcXu8Tu5hg=; b=ko0tDV2Jp9JE8GasHNAfBIl2EC5sByYW7w0bm7ihx3pEbcGwKfXe4OeH/aAQCErQ7nOI7oKvsc/v8pNXJqpxC4gYeVJizRET5+bFJjHOcybN3e+1JGjgL2/BX5h7aPfI25JsBIwyQFEIe6V+kLL0tPJyciHLl/CRETCwRehCYoo= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:reply-to:sender:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; b=SU/voYtefpVZNkAYydNofKGsDIZ9f/qT6LqJ1xzeZSuGCG+hcCGcmMHPHlkALb/NJ7Py7idLra+r9VjJvCsAxlmupxcsB2AXe5qASeBhGXON9xx9/VXDrgEdgixU80l9w14P0FqNDB2wQq4uJjyD3+cbALoGyiT/CXpU2cOnxQQ= Received: by 10.142.155.4 with SMTP id c4mr1595008wfe.208.1198530163216; Mon, 24 Dec 2007 13:02:43 -0800 (PST) Received: by 10.142.194.10 with HTTP; Mon, 24 Dec 2007 13:02:43 -0800 (PST) Message-ID: <539c60b90712241302q273dadafif945276bbbe71050@mail.gmail.com> Date: Mon, 24 Dec 2007 14:02:43 -0700 From: "Steve Franks" Sender: bahamasfranks@gmail.com To: rsmith@xs4all.nl, "User Questions" In-Reply-To: <20071127221142.GA64385@slackbox.xs4all.nl> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <539c60b90711271248o6eb0b9fw757e40fbcdfdb3c2@mail.gmail.com> <20071127221142.GA64385@slackbox.xs4all.nl> X-Google-Sender-Auth: b8b87b2b681b0cc9 Cc: Subject: Re: how to compile and install a new driver X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: stevefranks@ieee.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 21:02:44 -0000 On Nov 27, 2007 3:11 PM, Roland Smith wrote: > On Tue, Nov 27, 2007 at 01:48:28PM -0700, Steve Franks wrote: > > Hi, > > > > I found this thread > > http://lists.freebsd.org/pipermail/freebsd-stable/2006-August/027445.html > > to a driver I need for my system. > > > > (1) The file extension > > (http://www.dons.net.au/~darius/ucp-0.01.diff.gz) is .diff, not .c, so > > what exactly do I do with it to compile it? > > First, use gunzip to extract it. This will leave a file ucp-0.01.diff. > Next, su to root and cd to /usr/src/sys. > To apply the patch, do 'patch > Note that the patch doesn't apply cleanly (/usr/src/sys/dev/usb/usbdevs) > on 7.0-BETA2. If that's also the case on the version you're using, > you'll have to look at /usr/src/sys/dev/usb/usbdevs.orig and > /usr/src/sys/dev/usb/usbdevs.rej to fix it manually. > > Next, build and install a kernel according to the handbook. ('make > kernel' in /usr/src) > > > (2) Assuming I can get it to compile, which I've never done, what do I > > do with the object/driver file? > > The 'make kernel' command will install the module automagically. > On the next boot, you should be able to load the ucp driver module with > kldload(8). > > > This driver is long overdue, the part has been in usb devices for > > several years, and support is in OpenBSD and Linux already (so I'm > > told by google). I'll happily document the process if someone holds > > my hand. > > If it works, submit a PR. It doesn't. From the directory structure and filenames, "ucp" appears to be nearly identical to "ucom", and the src/sys/modules/ucp/Makefile is identical to the one for ucom (except it points to ucp.c instead of ucom.c, of course), but I still get: cd /usr/src/sys/modules; MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/GENERIC/modules KMODDIR=/boot/kernel MODULES_OVERRIDE="ucp" DEBUG_FLAGS="-g" MACHINE=amd64 KERNBUILDDIR="/usr/obj/usr/src/sys/GENERIC" make depend "/usr/src/share/mk/bsd.subdir.mk", line 84: warning: duplicate script for target "files" ignored "/usr/src/share/mk/bsd.subdir.mk", line 84: warning: duplicate script for target "includes" ignored @ -> /usr/src/sys machine -> /usr/src/sys/amd64/include make: don't know how to make ucp.c. Stop *** Error code 2 Stop in /usr/obj/usr/src/sys/GENERIC. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Thanks, Steve From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 21:50:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6469A16A468 for ; Mon, 24 Dec 2007 21:50:54 +0000 (UTC) (envelope-from frankstaals@gmx.net) Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by mx1.freebsd.org (Postfix) with SMTP id C18DF13C4D3 for ; Mon, 24 Dec 2007 21:50:53 +0000 (UTC) (envelope-from frankstaals@gmx.net) Received: (qmail invoked by alias); 24 Dec 2007 21:50:51 -0000 Received: from ip176-173-59-62.adsl.versatel.nl (EHLO Rena.FStaals.net) [62.59.173.176] by mail.gmx.net (mp016) with SMTP; 24 Dec 2007 22:50:51 +0100 X-Authenticated: #25365336 X-Provags-ID: V01U2FsdGVkX19FNKERFv1FaP14o9UYd23/966OV02pDgF5Yi+uYI sYsV1GYVB4fkR4 Message-ID: <4770296A.5050209@gmx.net> Date: Mon, 24 Dec 2007 22:49:30 +0100 From: Frank Staals User-Agent: Thunderbird 2.0.0.6 (X11/20071107) MIME-Version: 1.0 To: Jonathan Horne References: <200712241005.45959.freebsd@dfwlp.com> <87f7f4170712241111t157ad17cpf1c756f6db178d24@mail.gmail.com> <200712241316.22157.freebsd@dfwlp.com> In-Reply-To: <200712241316.22157.freebsd@dfwlp.com> X-Y-GMX-Trusted: 0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 21:50:54 -0000 Jonathan Horne wrote: > On Monday 24 December 2007 01:11:12 pm Jeremy Gransden wrote: > >> On 12/24/07, Jonathan Horne wrote: >> >>> i have been wanting to set up the ability to open an entirely new x >>> session to >>> another box, in a window of my currently running session. xnest is one >>> way >>> of doing this, but i was wondering if there are any others (perhaps, a >>> little >>> easier to configure and get going) ? >>> >>> cheers, >>> -- >>> Jonathan Horne >>> http://dfwlpiki.dfwlp.org >>> freebsd@dfwlp.com >>> _______________________________________________ >>> freebsd-questions@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>> To unsubscribe, send any mail to " >>> freebsd-questions-unsubscribe@freebsd.org" >>> >> Can you forward X through ssh? Or is that not what you are looking for? >> >> >> thanks, >> j >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" >> > > i did finally get ssh to forwared X, but it only worked with > > ssh -Y [host] > > im not sure yet why ssh -X doesnt work, but ive not yet finished reading about > the ins and outs of what security settings im overriding with the -Y. > > i was able to start xclock as a test. but what i would really like to be able > to accomplish, would be to get the entire 'startx' to work over an ssh > session, and have it open as another window on my desktop. > > cheers, > Is vnc not an option then ? -- -Frank Staals From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 22:21:42 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 875D216A417 for ; Mon, 24 Dec 2007 22:21:42 +0000 (UTC) (envelope-from lists@webtent.net) Received: from esmtp.webtent.net (esmtp.webtent.net [208.38.145.5]) by mx1.freebsd.org (Postfix) with ESMTP id 56BC913C467 for ; Mon, 24 Dec 2007 22:21:42 +0000 (UTC) (envelope-from lists@webtent.net) Received: from localhost (localhost [127.0.0.1]) by esmtp.webtent.net (WebTent ESMTP Postfix Internet Mail Gateway) with ESMTP id B1CD77FA5E for ; Mon, 24 Dec 2007 17:21:41 -0500 (EST) Received: from esmtp.webtent.net ([127.0.0.1]) by localhost (mx1.webtent.net [127.0.0.1]) (amavisd-maia, port 10024) with ESMTP id 56875-10 for ; Mon, 24 Dec 2007 17:21:33 -0500 (EST) Received: from [70.110.70.43] (columbus.webtent.org [70.110.70.43]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by esmtp.webtent.net (WebTent ESMTP Postfix Internet Mail Gateway) with ESMTP id AF6687FC2A for ; Mon, 24 Dec 2007 17:21:33 -0500 (EST) From: Robert Fitzpatrick To: FreeBSD Content-Type: text/plain Organization: WebTent Networking, Inc. Date: Mon, 24 Dec 2007 17:21:32 -0500 Message-Id: <1198534892.11590.8.camel@columbus.webtent.org> Mime-Version: 1.0 X-Mailer: Evolution 2.12.1 Content-Transfer-Encoding: 7bit X-Virus-Scanned: WebTent Mailguard 1.0.2a Subject: 4GB memory and more X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: robert@webtent.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 22:21:42 -0000 I have a couple of Supermicro servers and upgraded both with more memory. I upgraded our ESMTP server from 1GB to 4GB and our MX server from 2GB to 5GB. Below are the dmesg memory findings and, yes, I get the memory over 4GB ignored when booting up. The ESMTP even says that about 130MB is ignored. I was reading about building into the kernel PAE options for using above 4GB of memory, but in the dmesg I see PAE in the Features. Does this mean the support is there and I just need some BIOS tweaking? esmtp# dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #1: Tue Dec 13 16:00:53 EST 2005 admin@esmtp.webtent.net:/usr/src/sys/i386/compile/WEBTENT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 4160225280 (3967 MB) avail memory = 4073279488 (3884 MB) mx1# dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p5 #0: Sat Jun 2 11:11:40 EDT 2007 root@mx1.webtent.net:/usr/obj/usr/src/sys/WEBTENT Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x641d> AMD Features=0x20100000 Logical CPUs per core: 2 real memory = 3220635648 (3071 MB) avail memory = 3150565376 (3004 MB) Thanks in advance. -- Robert From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 23:06:23 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E234116A419 for ; Mon, 24 Dec 2007 23:06:23 +0000 (UTC) (envelope-from wundram@beenic.net) Received: from mail.beenic.net (mail.beenic.net [83.246.72.40]) by mx1.freebsd.org (Postfix) with ESMTP id A4BA513C457 for ; Mon, 24 Dec 2007 23:06:23 +0000 (UTC) (envelope-from wundram@beenic.net) Received: from phoenix (hnvr-4dbbb5d6.pool.einsundeins.de [77.187.181.214]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.beenic.net (Postfix) with ESMTP id 135D9A44529; Mon, 24 Dec 2007 23:58:49 +0100 (CET) From: "Heiko Wundram (Beenic)" Organization: Beenic Networks GmbH To: robert@webtent.com Date: Tue, 25 Dec 2007 01:06:18 +0100 User-Agent: KMail/1.9.7 References: <1198534892.11590.8.camel@columbus.webtent.org> In-Reply-To: <1198534892.11590.8.camel@columbus.webtent.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712250106.19265.wundram@beenic.net> Cc: freebsd-questions@freebsd.org Subject: Re: 4GB memory and more X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 23:06:24 -0000 Am Montag, 24. Dezember 2007 23:21:32 schrieb Robert Fitzpatrick: > I have a couple of Supermicro servers and upgraded both with more > memory. I upgraded our ESMTP server from 1GB to 4GB and our MX server > from 2GB to 5GB. Below are the dmesg memory findings and, yes, I get the > memory over 4GB ignored when booting up. The ESMTP even says that about > 130MB is ignored. I was reading about building into the kernel PAE > options for using above 4GB of memory, but in the dmesg I see PAE in the > Features. Does this mean the support is there and I just need some BIOS > tweaking? Nope. This means that your CPU supports PAE, but says nothing about the operating system itself (whether it uses PAE or not). When you want a PAE-enabled kernel (i.e., one that uses PAE to see the "extra" memory), see the PAE kernel configuration in the sys/i386/conf directory of your sources tree, and build your own kernel with (for example, if you don't want to customize the kernel configuration): make kernconf=PAE buildworld buildkernel installkernel This builds a kernel which actually uses that interface to see the extra memory and allows you to access it in standard i386 mode. Generally, it's considered better practise to use the AMD64 architecture to access the high memory (because of performance considerations and driver compatability), but I don't know whether your CPUs actually support the x64 operating mode, so you may be stuck with using PAE. YMMV. -- Heiko Wundram Product & Application Development From owner-freebsd-questions@FreeBSD.ORG Mon Dec 24 23:58:37 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 196A516A477 for ; Mon, 24 Dec 2007 23:58:37 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from smtp.infidyne.com (ds9.infidyne.com [88.80.6.206]) by mx1.freebsd.org (Postfix) with ESMTP id 5B22F13C447 for ; Mon, 24 Dec 2007 23:58:35 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se (c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se [85.229.22.130]) by smtp.infidyne.com (Postfix) with ESMTP id 4B02F77E15; Tue, 25 Dec 2007 00:58:34 +0100 (CET) From: Peter Schuller To: freebsd-questions@freebsd.org Date: Tue, 25 Dec 2007 01:58:24 +0100 User-Agent: KMail/1.9.7 References: <221c791e0712220839v67a02e78q7cd5519f9b05a210@mail.gmail.com> <200712230119.30705.peter.schuller@infidyne.com> <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> In-Reply-To: <1922FF4D9B0F57F56811A4DC@paul-schmehls-powerbook59.local> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart25502341.JQUCCJaeLB"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200712250158.34124.peter.schuller@infidyne.com> Cc: Paul Schmehl Subject: Re: Updating ports X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Dec 2007 23:58:37 -0000 --nextPart25502341.JQUCCJaeLB Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline > I don't understand this statement. I have killed portupgrade on numerous > occasions, both locally and remotely, and have never had a problem > restarting later. If you mean portupgrade doesn't restart where it left > off, then yes, that's true, but only in the sense that it goes through all > the ports checking for upgrades before returning to the build you left off > at. Actually I was wrong because portupgrade doesn't do what I want at all to= =20 begin with, so because nothing was ever started "correctly", there is nothi= ng=20 to resume "correctly". The intended situation was: Mini-port tree contains: A B C D depends on C Now, C is updated in the tree. You issue: portupgrade -r C If all goes well, C is rebuilt followed by D. But if interrupted after C, D= =20 won't get upgraded on a subsequent run because portupgrade does not know C= =20 was upgraded. Of course, this is based on portupgrading doing that to begin with and AFAI= K=20 this is not the case. I am not sure if any such logic is possible at all in= =20 fact. portupgrade -rf C works of course, ***IF*** you know that C was upgraded. W= hat=20 I lack is a "portupgrade -a --force-if-dep-was-upgraded", and even if that= =20 existed, the re-start problem would remain unless the fundamental approach= =20 was changed. (I have been meaning to fix this with my own package manager, but the proje= ct=20 has been stalled for a while.) > I *really* don't understand this. I can count on one hand the number of > times that I've run into dependency problems with portupgrade, and all of > those were addressed in /usr/port/UPDATING or by simply deinstalling and > reinstalling the port in question. I would love to hear what I am doing wrong. I have just never ever had good= =20 experience with it. Everywhere you read on mailinglists or wherever, you have people recommendi= ng=20 various versions (portupgrade -a, portupgrade -arR, etc) but none of it eve= r=20 works over time for me. =46irstly,there are these stale dependencies that are never explained anywh= ere=20 as far as I can tell. I am also suspicious of the methology used that cause= s=20 any kind of database / dependency inconsistencies as a matter of expected=20 procedure. The job of the tool is to get my installed packages in synch wit= h=20 the ports tree; there is no possibilities for "stale dependencies" here as= =20 far as I can tell, except in some very specific cases. But everywhere I loo= k=20 in online resources these stale dependencies seem to be treated like some=20 kind of unexplained-yet-necessary fact of life that nobody understands but= =20 that everyone seem to have a vague sense about. (I do realize upgrading is difficult in several fundamental ways; I wrote=20 pkgmanager to do in-place upgrading for pkgsrc in a manner similar to=20 portmanager - so I do have some experience with this. The re-write of=20 pkgmanager to also support ports is what I refer to above. But with all the= =20 kinks of pkgmanager, the fundamental approach worked very well in practice,= =20 modulo some issues that have to do with lack of implementing particular=20 cases, or fundamental problems in the underlying package management system.) Secondly there are various magic failures that start happening as a result = of=20 some dependency X being upgraded (or NOT upgraded) such that the other=20 package Y depending on X breaks. This typically gets resolved by concluding= =20 that "ok, it's all borked, I'll portupgrade -rf Y" (or portupgrade -Rf X,=20 depending)). Generally, these failures can be characterized as being such=20 that they do not occurr if you 'make install' on a clean system with a=20 consistent ports tree, but only occurr as a side-effect of problems with th= e=20 upgrading procedure directly, or indirectly because packages are tested on= =20 fresh trees and do not stress dependency edge cases. Note that all this is specific to wanting to synch ALL packages. I never go= =20 around "sniping" at particular packages since i consider that to be a=20 fundamentally broken approach in most situations. I just want to have=20 everything upgraded to their latest versions (with security fixes), not hav= e=20 to micro-manage individual packages. Also, I do pay attention to /usr/ports/UPGRADING, but issues accounted for= =20 there definitely to not cover all the problems. Actually. Is there anyone heavly involved with ports that might be interest= ed=20 in discussing some of the issues having to do with upgrading? I have my own= =20 private little vision of what I want to see from ports/pkgsrc itself to=20 enable package managers to support seamless upgrading. If there could be so= me=20 cooperation going in terms fo enabling upgrading tools to work better, I=20 might be more motivated to finally resume work on that pkgmanager rewrite. =2D-=20 / Peter Schuller PGP userID: 0xE9758B7D or 'Peter Schuller ' Key retrieval: Send an E-Mail to getpgpkey@scode.org E-Mail: peter.schuller@infidyne.com Web: http://www.scode.org --nextPart25502341.JQUCCJaeLB Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQBHcFW5DNor2+l1i30RAnEZAKDI02TtbeknQx8hqJ8j0pYQtgv2/wCgw1Bj ZLPPSTEgrWuAci7RZY7z3Ww= =gK/M -----END PGP SIGNATURE----- --nextPart25502341.JQUCCJaeLB-- From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 02:07:37 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3BD1E16A419; Tue, 25 Dec 2007 02:07:37 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from mail.rwxrwxrwx.net (rwxrwxrwx.net [82.93.23.199]) by mx1.freebsd.org (Postfix) with ESMTP id E203013C46A; Tue, 25 Dec 2007 02:07:36 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from localhost (unknown [127.0.0.1]) by mail.rwxrwxrwx.net (Postfix) with ESMTP id ADEE56D486; Tue, 25 Dec 2007 02:59:10 +0100 (CET) Received: from mail.rwxrwxrwx.net ([127.0.0.1]) by localhost (mail.rwxrwxrwx.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 9AaidLEwP7tr; Tue, 25 Dec 2007 02:59:01 +0100 (CET) Received: by mail.rwxrwxrwx.net (Postfix, from userid 1001) id 47A846D485; Tue, 25 Dec 2007 02:59:01 +0100 (CET) Date: Tue, 25 Dec 2007 02:59:00 +0100 From: Martin Tournoij To: freebsd-questions@freebsd.org, questions@freebsd.org Message-ID: <20071225015900.GA44779@glitch.rwxrwxrwx.net> Mail-Followup-To: freebsd-questions@freebsd.org, questions@freebsd.org, svein.h@lvor.halvorsen.cc References: <476EA7CE.9040705@lvor.halvorsen.cc> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: <476EA7CE.9040705@lvor.halvorsen.cc> User-Agent: mutt-ng/devel-r804 (FreeBSD) Cc: svein.h@lvor.halvorsen.cc Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 02:07:37 -0000 On Sun 23 Dec 2007 19:12, Svein Halvor Halvorsen wrote: > I'm switching to UTF-8, and everything seems to work flawlessly, > except for Opera. If I type one of the norwegian letters =E6=F8=E5 into a > text input box all I get is a square box. If I type backspace over > it, it gets converted to a questionmark on the first stroke of > backspace, and deleted on the second. If I copy the square box into > another program, the propper letter is paced. The problem is that the font you're using doesn't support the character(s) you want to type. You'll have to change the font in the opera preferences dialog, I think the bitstream family supports most UTF-8 fonts. This site may be useful in testing: http://people.w3.org/rishida/scripts/uniview/ Regards, Martin Tournoij From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 02:07:37 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3BD1E16A419; Tue, 25 Dec 2007 02:07:37 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from mail.rwxrwxrwx.net (rwxrwxrwx.net [82.93.23.199]) by mx1.freebsd.org (Postfix) with ESMTP id E203013C46A; Tue, 25 Dec 2007 02:07:36 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from localhost (unknown [127.0.0.1]) by mail.rwxrwxrwx.net (Postfix) with ESMTP id ADEE56D486; Tue, 25 Dec 2007 02:59:10 +0100 (CET) Received: from mail.rwxrwxrwx.net ([127.0.0.1]) by localhost (mail.rwxrwxrwx.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 9AaidLEwP7tr; Tue, 25 Dec 2007 02:59:01 +0100 (CET) Received: by mail.rwxrwxrwx.net (Postfix, from userid 1001) id 47A846D485; Tue, 25 Dec 2007 02:59:01 +0100 (CET) Date: Tue, 25 Dec 2007 02:59:00 +0100 From: Martin Tournoij To: freebsd-questions@freebsd.org, questions@freebsd.org Message-ID: <20071225015900.GA44779@glitch.rwxrwxrwx.net> Mail-Followup-To: freebsd-questions@freebsd.org, questions@freebsd.org, svein.h@lvor.halvorsen.cc References: <476EA7CE.9040705@lvor.halvorsen.cc> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: <476EA7CE.9040705@lvor.halvorsen.cc> User-Agent: mutt-ng/devel-r804 (FreeBSD) Cc: svein.h@lvor.halvorsen.cc Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 02:07:37 -0000 On Sun 23 Dec 2007 19:12, Svein Halvor Halvorsen wrote: > I'm switching to UTF-8, and everything seems to work flawlessly, > except for Opera. If I type one of the norwegian letters =E6=F8=E5 into a > text input box all I get is a square box. If I type backspace over > it, it gets converted to a questionmark on the first stroke of > backspace, and deleted on the second. If I copy the square box into > another program, the propper letter is paced. The problem is that the font you're using doesn't support the character(s) you want to type. You'll have to change the font in the opera preferences dialog, I think the bitstream family supports most UTF-8 fonts. This site may be useful in testing: http://people.w3.org/rishida/scripts/uniview/ Regards, Martin Tournoij From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 03:07:06 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7C44B16A417 for ; Tue, 25 Dec 2007 03:07:06 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from comcast-smtp-02.tampflrdc.rr.com (comcast-smtp-02.tampflrdc.rr.com [65.32.5.157]) by mx1.freebsd.org (Postfix) with ESMTP id 44AE613C448 for ; Tue, 25 Dec 2007 03:07:06 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from [192.168.1.105] (c-98-199-18-87.hsd1.tx.comcast.net [98.199.18.87]) by comcast-smtp-02.tampflrdc.rr.com (8.13.6/8.13.6) with ESMTP id lBP36rYO015600; Mon, 24 Dec 2007 22:06:54 -0500 (EST) From: David J Brooks Organization: KC5WNK To: freebsd-questions@freebsd.org, questions@freebsd.org, svein.h@lvor.halvorsen.cc Date: Mon, 24 Dec 2007 21:06:53 -0600 User-Agent: KMail/1.9.7 References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> In-Reply-To: <20071225015900.GA44779@glitch.rwxrwxrwx.net> X-Face: +\{75whsIB]=i--WqkV^U>!y`<~%(FUd, DQs, &e1yLt==9%It?7#?n>%Splqb, =?utf-8?q?=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=0A=09lDIEu=25W?= =?utf-8?q?sB7o+6k2n=606Q5Fl?=, vJei{$-.KlHPHu/.~VuE=C[}lQmL}>V1t\yTn2iTwCfM`% MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200712242106.54215.freysman@comcast.net> X-Virus-Scanned: Symantec AntiVirus Scan Engine Cc: Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 03:07:06 -0000 On Monday 24 December 2007 07:59:00 pm Martin Tournoij wrote: > On Sun 23 Dec 2007 19:12, Svein Halvor Halvorsen wrote: > > I'm switching to UTF-8, and everything seems to work flawlessly, > > except for Opera. If I type one of the norwegian letters =E6=F8=E5 into= a > > text input box all I get is a square box. If I type backspace over > > it, it gets converted to a questionmark on the first stroke of > > backspace, and deleted on the second. If I copy the square box into > > another program, the propper letter is paced. > > The problem is that the font you're using doesn't support the > character(s) you want to type. > You'll have to change the font in the opera preferences dialog, I > think the bitstream family supports most UTF-8 fonts. > > This site may be useful in testing: > http://people.w3.org/rishida/scripts/uniview/ The DejaVu font set is based on BitstreamVera and supports an even wider ra= nge=20 of Unicode characters. /usr/ports/x11-fonts/dejavu David =2D-=20 This message is a stern warning of things to come. From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 03:49:41 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CF39416A418 for ; Tue, 25 Dec 2007 03:49:41 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from comcast-smtp-02.tampflrdc.rr.com (comcast-smtp-02.tampflrdc.rr.com [65.32.5.157]) by mx1.freebsd.org (Postfix) with ESMTP id 990CC13C448 for ; Tue, 25 Dec 2007 03:49:41 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from [192.168.1.105] (c-98-199-18-87.hsd1.tx.comcast.net [98.199.18.87]) by comcast-smtp-02.tampflrdc.rr.com (8.13.6/8.13.6) with ESMTP id lBP36rYO015600; Mon, 24 Dec 2007 22:06:54 -0500 (EST) From: David J Brooks Organization: KC5WNK To: freebsd-questions@freebsd.org, questions@freebsd.org, svein.h@lvor.halvorsen.cc Date: Mon, 24 Dec 2007 21:06:53 -0600 User-Agent: KMail/1.9.7 References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> In-Reply-To: <20071225015900.GA44779@glitch.rwxrwxrwx.net> X-Face: +\{75whsIB]=i--WqkV^U>!y`<~%(FUd, DQs, &e1yLt==9%It?7#?n>%Splqb, =?utf-8?q?=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=0A=09lDIEu=25W?= =?utf-8?q?sB7o+6k2n=606Q5Fl?=, vJei{$-.KlHPHu/.~VuE=C[}lQmL}>V1t\yTn2iTwCfM`% MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200712242106.54215.freysman@comcast.net> X-Virus-Scanned: Symantec AntiVirus Scan Engine Cc: Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 03:49:41 -0000 On Monday 24 December 2007 07:59:00 pm Martin Tournoij wrote: > On Sun 23 Dec 2007 19:12, Svein Halvor Halvorsen wrote: > > I'm switching to UTF-8, and everything seems to work flawlessly, > > except for Opera. If I type one of the norwegian letters =E6=F8=E5 into= a > > text input box all I get is a square box. If I type backspace over > > it, it gets converted to a questionmark on the first stroke of > > backspace, and deleted on the second. If I copy the square box into > > another program, the propper letter is paced. > > The problem is that the font you're using doesn't support the > character(s) you want to type. > You'll have to change the font in the opera preferences dialog, I > think the bitstream family supports most UTF-8 fonts. > > This site may be useful in testing: > http://people.w3.org/rishida/scripts/uniview/ The DejaVu font set is based on BitstreamVera and supports an even wider ra= nge=20 of Unicode characters. /usr/ports/x11-fonts/dejavu David =2D-=20 This message is a stern warning of things to come. From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 07:08:29 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5F0A516A419 for ; Tue, 25 Dec 2007 07:08:29 +0000 (UTC) (envelope-from sdavtaker@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.242]) by mx1.freebsd.org (Postfix) with ESMTP id 28C6E13C43E for ; Tue, 25 Dec 2007 07:08:28 +0000 (UTC) (envelope-from sdavtaker@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so404184anc.13 for ; Mon, 24 Dec 2007 23:08:28 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:user-agent:mime-version:to:subject:content-type:content-transfer-encoding; bh=9M/dorBBjQZcPnBV7QRCcjkeZhS6ff3VuP5Sbj19vag=; b=sDBc3WNgPUmLU6l5UZBg2ny7Py2jOzMgcskxUC5BsV8fXrH3QEQ3uq5pvmwv1nlmEPSq2gIRrppMHP/UZ3cD4xs+Dh1KuC98AIOQzMI3UMrIvWd1zjrOplBuvQLiQ3pAp6cnf+i8Cu+Xu83Wm0LSN3csM57KLCrxdRTcE6x20bI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:content-type:content-transfer-encoding; b=w37GILzaWsJ1RRCPeG/raSH3SBpchASMABKz4Qv9p8FSx1ULfpK8s5K5NiQdKzKWpvHa6hoY23s712DMrcGAPJ/gOXEY2khZEor3QdMheGB2FZz9+/4EAFUY7ltNRwGQYZFf6SDBSK8kShyDvOwuUoymldKsZ40sMdpuOdnvck0= Received: by 10.100.34.16 with SMTP id h16mr11041541anh.111.1198564774081; Mon, 24 Dec 2007 22:39:34 -0800 (PST) Received: from ?192.168.1.101? ( [190.18.36.119]) by mx.google.com with ESMTPS id i4sm6956666rng.7.2007.12.24.22.39.32 (version=TLSv1/SSLv3 cipher=RC4-MD5); Mon, 24 Dec 2007 22:39:33 -0800 (PST) Message-ID: <4770A5A3.6080605@gmail.com> Date: Tue, 25 Dec 2007 03:39:31 -0300 From: =?ISO-8859-1?Q?Sd=E4vtaker?= User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Problem setting up DNS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 07:08:29 -0000 Hello, im using FBSD 6.2 I got 2 domains registered in the local nic and I could get one working but the second one doesnt :-/ This is my first attemp to set up a real DNS, so im pretty sure i did something wrong, i copy/pasted here all the info i think can be usefull, i can add more data if necesary. BTW, sorry for my english, it is not my main language. Thanks for any help. Sdav Info: I got this in named.conf: (...) zone "unhost.com.ar" { type master; file "master/unhost.com.ar"; allow-transfer { 202.157.182.142; }; }; zone "sacrarium.com.ar" { type master; file "master/sacrarium.com.ar"; allow-transfer { 202.157.182.142; }; }; (...) The first one is working the second one is not. In nic.ar both point to ns1.unhost.com.ar and 202.157.182.142 (twisted4life free secondary) the Zone files are: master/unhost.com.ar: $TTL 86400 ; 1 day unhost.com.ar. IN SOA ns1.unhost.com.ar. admin.unhost.com.ar. ( 2007102801 ; Serial 10800 ; Refresh 3600 ; Retry 604800 ; Expire 86400 ; Minimum TTL ) ; DNS Servers IN NS ns1.unhost.com.ar. ; MX Records IN MX 10 mx.unhost.com.ar. IN A 190.2.50.197 ; Machine Names ns1 IN A 190.2.50.197 mx IN A 190.2.50.197 ftp IN A 190.2.50.197 ; Aliases www IN CNAME @ and master/sacrarium.com.ar say: $TTL 86400 ; 1 day sacrarium.com.ar. IN SOA ns1.unhost.com.ar. admin.unhost.com.ar. ( 2007102801 ; Serial 10800 ; Refresh 3600 ; Retry 604800 ; Expire 86400 ; Minimum TTL ) ; MX Records IN MX 10 mx.unhost.com.ar. ; Machine Names www IN A 190.2.50.197 When i do: nslookup www.unhost.com.ar Server: 200.69.193.1 Address: 200.69.193.1#53 Non-authoritative answer: www.unhost.com.ar canonical name = unhost.com.ar. Name: unhost.com.ar Address: 190.2.50.197 nslookup www.sacrarium.com.ar Server: 200.69.193.1 Address: 200.69.193.1#53 ** server can't find www.sacrarium.com.ar: SERVFAIL when dig: dig @unhost.com.ar www ; <<>> DiG 9.3.3 <<>> @unhost.com.ar www ; (1 server found) ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 38338 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;www. IN A ;; AUTHORITY SECTION: . 10437 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2007122401 1800 900 604800 86400 ;; Query time: 2 msec ;; SERVER: 190.2.50.197#53(190.2.50.197) ;; WHEN: Tue Dec 25 03:34:23 2007 ;; MSG SIZE rcvd: 96 dig @unhost.com.ar sacrarium.com.ar ; <<>> DiG 9.3.3 <<>> @unhost.com.ar sacrarium.com.ar ; (1 server found) ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 17321 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;sacrarium.com.ar. IN A ;; Query time: 2 msec ;; SERVER: 190.2.50.197#53(190.2.50.197) ;; WHEN: Tue Dec 25 03:34:40 2007 ;; MSG SIZE rcvd: 34 dig sacrarium.com.ar ; <<>> DiG 9.3.3 <<>> sacrarium.com.ar ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 62816 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;sacrarium.com.ar. IN A ;; Query time: 451 msec ;; SERVER: 200.69.193.1#53(200.69.193.1) ;; WHEN: Tue Dec 25 03:35:01 2007 ;; MSG SIZE rcvd: 34 From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 07:49:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 35F1716A41A for ; Tue, 25 Dec 2007 07:49:54 +0000 (UTC) (envelope-from bounces@nabble.com) Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158]) by mx1.freebsd.org (Postfix) with ESMTP id 185C913C4F9 for ; Tue, 25 Dec 2007 07:49:54 +0000 (UTC) (envelope-from bounces@nabble.com) Received: from isper.nabble.com ([192.168.236.156]) by kuber.nabble.com with esmtp (Exim 4.63) (envelope-from ) id 1J74Xx-00054x-Kl for freebsd-questions@freebsd.org; Mon, 24 Dec 2007 23:49:53 -0800 Message-ID: <14493715.post@talk.nabble.com> Date: Mon, 24 Dec 2007 23:49:53 -0800 (PST) From: RSean To: freebsd-questions@freebsd.org In-Reply-To: <20071212211015.439a673a@gumby.homeunix.com.> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Nabble-From: rseans@gmail.com References: <475E0190.7030909@pacific.net.sg> <200712111718.05876.nvass@teledomenet.gr> <475EAC9D.1020902@pacific.net.sg> <20071211084309.A16234@wonkity.com> <475EB887.6070902@pacific.net.sg> <475EC215.8060004@dial.pipex.com> <475F4209.8080507@pacific.net.sg> <200712120920.46626.nvass@teledomenet.gr> <475F9648.804@pacific.net.sg> <20071212085939.F21510@wonkity.com> <47600D2B.70306@dial.pipex.com> <20071212120214.C22244@wonkity.com> <20071212211015.439a673a@gumby.homeunix.com.> Subject: Re: performance impact of large /etc/hosts files X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 07:49:54 -0000 Hi guys, Just curious if anyone has tried regular expressions to handle ads and banners. We have a small network of about 10 users. We use SafeSquid as proxy and content filter. It supports the use of regex for defining rules. The URL Filter section has 2 default rules for blocking ads and banners - Hosts: (^ad(|s|v|server)\.|adtag\.|targetsearches.com|webconnect.net|imgis.com|atwola.com|fastclick.net|abz.com|tribalfusion.com|advertising.com|atdmt.com|sp inbox\.(com|net)|linkexchange.com|hitbox.com|doubleclick.net|valueclick.com|click2net.com|mediaplex.com|247media.com|clickagents.com|adbutler.com|qkim g.net|realmedia.com|us.a1.yimg.com|clickheretofind.com|images.cybereps.com|adbureau.net|sfads.osdn.com|adflow.com|adprofs.com|zedo.com|digitalmedianet .com|ad-flow.com|/adsync/|adtech.de|netdirect.nl|rcm-images.amazon.com|pamedia.com|msads.net|valuead.com|smartadserver.com|thisbanner.com|aaddzz.com|s cripps.com|ru4.com|adtrix.net|falkag.net) File: (/adimages/|/banner(|s)/|/ad(|s|v|(|_)banner(|s))/|/adx/|/sponsors/|/advert(ising|s|)/|/adcycle/|/track/|/promo/|/adspace/|/admentor/|/image\.ng/|/ajr otator/|/adview.php|/clickthru|/affiliates|banmat(\.cgi|.\.cgi)|/adproof/|/bannerfarm/|/BannerAds/|/banner_|sponsorid|/servfu.pl|/RealMedia/|/adsync/| _ad_|/adceptdelivery.cgi) I am not a very technical person, but the first rule, I think, is a regex that defines hosts that serve ads; while the second rule is a regex for words that the file part of a url may contain. These rules very efficiently block ads and banners at the gateway, saving b/w and improving surfing experience. Just thought I should mention this. Cheers! -- View this message in context: http://www.nabble.com/performance-impact-of-large--etc-hosts-files-tp14267018p14493715.html Sent from the freebsd-questions mailing list archive at Nabble.com. From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 09:37:56 2007 Return-Path: Delivered-To: questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A86B216A41A for ; Tue, 25 Dec 2007 09:37:56 +0000 (UTC) (envelope-from frankstaals@gmx.net) Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by mx1.freebsd.org (Postfix) with SMTP id 2DE5F13C4CC for ; Tue, 25 Dec 2007 09:37:55 +0000 (UTC) (envelope-from frankstaals@gmx.net) Received: (qmail invoked by alias); 25 Dec 2007 09:37:53 -0000 Received: from ip176-173-59-62.adsl.versatel.nl (EHLO Rena.FStaals.net) [62.59.173.176] by mail.gmx.net (mp006) with SMTP; 25 Dec 2007 10:37:53 +0100 X-Authenticated: #25365336 X-Provags-ID: V01U2FsdGVkX19KtCVKxM5KzJu5SiQLFMnDIINS7ZK+Na7PkcR0zj sMVmw/hboh9I7q Message-ID: <4770CF21.10705@gmx.net> Date: Tue, 25 Dec 2007 10:36:33 +0100 From: Frank Staals User-Agent: Thunderbird 2.0.0.9 (X11/20071224) MIME-Version: 1.0 To: questions@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Y-GMX-Trusted: 0 Cc: Subject: Buildworld to releng7 fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 09:37:56 -0000 Last night I started a buildworld to upgrade on one of my FreeBSD systems with the latest sources (RELENG_7), unfortunately buildworld crashes. What is going wrong ? System info: root@FStaals# uname -a FreeBSD FStaals.net 7.0-BETA3 FreeBSD 7.0-BETA3 #2: Mon Nov 19 19:50:46 CET 2007 root@FStaals.net:/usr/obj/usr/src/sys/PFSERVERKERNEL amd64 My /etc/make.conf: root@FStaals# cat /etc/make.conf ## X11 base X11BASE=${LOCALBASE} ### use a different workdir WRKDIRPREFIX=/usr/ports/obj NO_PROFILE=true # added by use.perl 2006-12-29 03:57:33 PERL_VER=5.8.8 PERL_VERSION=5.8.8 Last X lines of my buildworld output ( I have the complete log but I doubt it is interesting ) cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-modes.c cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-extract.c cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-opinit.c cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-output.c cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-peep.c cc -O2 -fno-strict-aliasing -pipe -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/tmp/usr\" -I/usr/obj/usr/src/tmp/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libcpp/include -I/usr/src/gnu/usr.bin/cc/cc_int/../../../../contrib/gcclibs/libdecnumber -I/usr/obj/usr/src/tmp/legacy/usr/include -c ../cc_tools/insn-recog.c {standard input}: Assembler messages: {standard input}:20169: Warning: end of file not at end of a line; newline inserted {standard input}:21608: Error: unknown pseudo-op: `.qu' cc: Internal error: Killed: 9 (program cc1) Please submit a full bug report. See for instructions. *** Error code 1 1 error *** Error code 2 1 error *** Error code 2 1 error *** Error code 2 1 error *** Error code 2 1 error -- -Frank Staals From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 11:53:41 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BC27F16A419 for ; Tue, 25 Dec 2007 11:53:41 +0000 (UTC) (envelope-from fbsd06+RQ=e6dbdde8@mlists.homeunix.com) Received: from turtle-out.mxes.net (turtle-out.mxes.net [216.86.168.191]) by mx1.freebsd.org (Postfix) with ESMTP id 8748D13C469 for ; Tue, 25 Dec 2007 11:53:41 +0000 (UTC) (envelope-from fbsd06+RQ=e6dbdde8@mlists.homeunix.com) Received: from mxout-04.mxes.net (mxout-04.mxes.net [216.86.168.179]) by turtle-in.mxes.net (Postfix) with ESMTP id 8E72816467D for ; Tue, 25 Dec 2007 06:23:40 -0500 (EST) Received: from gumby.homeunix.com. (unknown [87.81.140.128]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp.mxes.net (Postfix) with ESMTP id 6A929D05A3 for ; Tue, 25 Dec 2007 06:23:37 -0500 (EST) Date: Tue, 25 Dec 2007 11:23:34 +0000 From: RW To: freebsd-questions@freebsd.org Message-ID: <20071225112334.4c9a8b9e@gumby.homeunix.com.> In-Reply-To: <14493715.post@talk.nabble.com> References: <475E0190.7030909@pacific.net.sg> <200712111718.05876.nvass@teledomenet.gr> <475EAC9D.1020902@pacific.net.sg> <20071211084309.A16234@wonkity.com> <475EB887.6070902@pacific.net.sg> <475EC215.8060004@dial.pipex.com> <475F4209.8080507@pacific.net.sg> <200712120920.46626.nvass@teledomenet.gr> <475F9648.804@pacific.net.sg> <20071212085939.F21510@wonkity.com> <47600D2B.70306@dial.pipex.com> <20071212120214.C22244@wonkity.com> <20071212211015.439a673a@gumby.homeunix.com.> <14493715.post@talk.nabble.com> X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.3; i386-portbld-freebsd7.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: performance impact of large /etc/hosts files X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 11:53:41 -0000 On Mon, 24 Dec 2007 23:49:53 -0800 (PST) RSean wrote: > > Hi guys, > > Just curious if anyone has tried regular expressions to handle ads and > banners. That's what adzap and similar squid filters do. From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 11:53:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D509216A421 for ; Tue, 25 Dec 2007 11:53:52 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: from web57001.mail.re3.yahoo.com (web57001.mail.re3.yahoo.com [66.196.97.105]) by mx1.freebsd.org (Postfix) with SMTP id 877F013C461 for ; Tue, 25 Dec 2007 11:53:52 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: (qmail 55587 invoked by uid 60001); 25 Dec 2007 11:53:51 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=bt127lOlRFOHWmVDM9IA77AG5lmUmdP/3oBvrBvaQwwTZbYsclrR5Z3atRYLhwcD1hAANLwADOWCslYmcBabHI6e3peCGoPrH/MJbaZuf7GKiCykeL5LiqHjwg9mxvUWdkOPuL04ecr9Vsqh5wKBw0eSPvTOLeoK/xm0qo6sVgA=; X-YMail-OSG: FQE0ahwVM1mshNxnBB3DVb0CoL2ZGe2pd0dsRZSEbJSrqrHhCHoMotyZ3x6CS_MIv0dx3Ipx6r9yopgVu7qqvUmqDEbvCWqVB30if6eAMCP1jrStCcrsNfb071uYQw-- Received: from [165.21.154.8] by web57001.mail.re3.yahoo.com via HTTP; Tue, 25 Dec 2007 03:53:51 PST Date: Tue, 25 Dec 2007 03:53:51 -0800 (PST) From: Unga To: freebsd-questions@freebsd.org In-Reply-To: <4770A5A3.6080605@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <770996.55383.qm@web57001.mail.re3.yahoo.com> Subject: Re: Problem setting up DNS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 11:53:52 -0000 --- Sdävtaker wrote: > Hello, im using FBSD 6.2 > > I got 2 domains registered in the local nic and I > could get one working > but the second one doesnt :-/ > This is my first attemp to set up a real DNS, so im > pretty sure i did > something wrong, i copy/pasted here all the info i > think can be usefull, > i can add more data if necesary. > BTW, sorry for my english, it is not my main > language. > Thanks for any help. > Sdav > Hi Merry Christmas This can be used as a guide: https://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/en-US/RHEL510/Deployment_Guide/ch-bind.html You may need to adjust /etc/rc.d/named accordingly. Regards Unga ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 12:33:33 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0476816A468 for ; Tue, 25 Dec 2007 12:33:33 +0000 (UTC) (envelope-from wangyi6854@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id E35A913C4E1 for ; Tue, 25 Dec 2007 12:33:32 +0000 (UTC) (envelope-from wangyi6854@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so3517223waf.3 for ; Tue, 25 Dec 2007 04:33:32 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=46eOAr6+XbHT2n6sWGV/o7+CzdUYIiDwHCzM3/dYPy4=; b=wroT+iqItse9UzX7w52IHeaci16CFzPuxE9KheEAen/TcLur4SmbvsDIh2R2kApXUG+DKkIWuOEtJLlHJQD7V0LjM1msOkD66J/pMY1BZ4swTULaF3x9qYkVBkrbvyyBkXVYV9U6wdQelE2+tGvflY5qcuiF/NqCr7/mUb1Vbc0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Sn9tgkIIXdatxcbXe3rIPiTketi7DURFumBBTUbqqpzTX2CgXMtrLi5S6LuYkIZLx7wMx7Bcy79xbKHng5Ms4zG1AB5+ekaavGNYjF+YlBtdVBro4mg990XbjFGxAmLsEZrtcPkZqD1OYiyJedkQMJar5ly61kPtPNwpe3nhUbs= Received: by 10.142.213.9 with SMTP id l9mr1672172wfg.104.1198586012492; Tue, 25 Dec 2007 04:33:32 -0800 (PST) Received: by 10.142.44.10 with HTTP; Tue, 25 Dec 2007 04:33:32 -0800 (PST) Message-ID: <5ea5cca50712250433o707008d9k7fb4ebfdd1da0780@mail.gmail.com> Date: Tue, 25 Dec 2007 20:33:32 +0800 From: "Yi Wang" To: "Daniel Rucci" In-Reply-To: <476F78EC.6070507@rucci.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <476F78EC.6070507@rucci.org> Cc: freebsd-questions@freebsd.org Subject: Re: mount & ntfs-3g X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 12:33:33 -0000 Please read this mail: http://lists.freebsd.org/pipermail/freebsd-ports/2007-November/045153.html On 12/24/07, Daniel Rucci wrote: > Hi, > I'm trying to mount an ntfs-3g partition but get an error when using > mount. > > mount -t ntfs-3g /dev/ad6s1 /win > mount: /dev/ad6s1 : Operation not supported by device > > if i use mount_ntfs-3g ... it works fine but that won't help me with > respect to mounting during boot. > > Is there anything special that needs to be done to get a non standard > mount_* command to work via mount? I read somewhere to add a symlink to > mount_ntfs-3g to /sbin/ but that did not seem to do anything. > > Thanks, > Dan > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > -- Regards, Wang Yi From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 15:19:31 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E99CB16A418 for ; Tue, 25 Dec 2007 15:19:30 +0000 (UTC) (envelope-from gelsemap@superhero.nl) Received: from superman.superhero.nl (superhero.nl [82.95.198.17]) by mx1.freebsd.org (Postfix) with ESMTP id 28D2013C44B for ; Tue, 25 Dec 2007 15:19:29 +0000 (UTC) (envelope-from gelsemap@superhero.nl) Received: (qmail 80620 invoked by uid 80); 25 Dec 2007 14:52:32 -0000 Received: from robin.ad.superhero.nl ([10.202.77.197]) (SquirrelMail authenticated user gelsemap) by webmail.superhero.nl with HTTP; Tue, 25 Dec 2007 15:52:32 +0100 (CET) Message-ID: <1262.10.202.77.197.1198594352.squirrel@webmail.superhero.nl> In-Reply-To: <4770A5A3.6080605@gmail.com> References: <4770A5A3.6080605@gmail.com> Date: Tue, 25 Dec 2007 15:52:32 +0100 (CET) From: "Gelsema, P \(Patrick\)" To: =?iso-8859-1?Q?Sd=E4vtaker?= User-Agent: SquirrelMail/1.4.8 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: questions@freebsd.org Subject: Re: Problem setting up DNS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 15:19:31 -0000 On Tue, December 25, 2007 07:39, Sdävtaker wrote: > Hello, im using FBSD 6.2 > > I got 2 domains registered in the local nic and I could get one working > but the second one doesnt :-/ > This is my first attemp to set up a real DNS, so im pretty sure i did > something wrong, i copy/pasted here all the info i think can be usefull, > i can add more data if necesary. > BTW, sorry for my english, it is not my main language. > Thanks for any help. > Sdav Sounds like somewhere you got a }; on the wrong line. named-checkconf is your friend for checking the config file. named-checkzone for your zone files. Rgds, Patrick > > Info: > > I got this in named.conf: > (...) > zone "unhost.com.ar" { > type master; > file "master/unhost.com.ar"; > allow-transfer { > 202.157.182.142; > }; > }; > > zone "sacrarium.com.ar" { > type master; > file "master/sacrarium.com.ar"; > allow-transfer { > 202.157.182.142; > }; > }; > (...) > > The first one is working the second one is not. > In nic.ar both point to ns1.unhost.com.ar and 202.157.182.142 > (twisted4life free secondary) > > the Zone files are: > master/unhost.com.ar: > $TTL 86400 ; 1 day > unhost.com.ar. IN SOA ns1.unhost.com.ar. admin.unhost.com.ar. > ( > 2007102801 ; Serial > 10800 ; Refresh > 3600 ; Retry > 604800 ; Expire > 86400 ; Minimum TTL > ) > > ; DNS Servers > IN NS ns1.unhost.com.ar. > > ; MX Records > IN MX 10 mx.unhost.com.ar. > IN A 190.2.50.197 > > ; Machine Names > ns1 IN A 190.2.50.197 > mx IN A 190.2.50.197 > ftp IN A 190.2.50.197 > > ; Aliases > www IN CNAME @ > > > and master/sacrarium.com.ar say: > $TTL 86400 ; 1 day > sacrarium.com.ar. IN SOA ns1.unhost.com.ar. > admin.unhost.com.ar. ( > 2007102801 ; Serial > 10800 ; Refresh > 3600 ; Retry > 604800 ; Expire > 86400 ; Minimum TTL > ) > > ; MX Records > IN MX 10 mx.unhost.com.ar. > > ; Machine Names > www IN A 190.2.50.197 > > > When i do: > nslookup www.unhost.com.ar > Server: 200.69.193.1 > Address: 200.69.193.1#53 > > Non-authoritative answer: > www.unhost.com.ar canonical name = unhost.com.ar. > Name: unhost.com.ar > Address: 190.2.50.197 > > nslookup www.sacrarium.com.ar > Server: 200.69.193.1 > Address: 200.69.193.1#53 > > ** server can't find www.sacrarium.com.ar: SERVFAIL > > when dig: > dig @unhost.com.ar www > > ; <<>> DiG 9.3.3 <<>> @unhost.com.ar www > ; (1 server found) > ;; global options: printcmd > ;; Got answer: > ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 38338 > ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 > > ;; QUESTION SECTION: > ;www. IN A > > ;; AUTHORITY SECTION: > . 10437 IN SOA a.root-servers.net. > nstld.verisign-grs.com. 2007122401 1800 900 604800 86400 > > ;; Query time: 2 msec > ;; SERVER: 190.2.50.197#53(190.2.50.197) > ;; WHEN: Tue Dec 25 03:34:23 2007 > ;; MSG SIZE rcvd: 96 > > dig @unhost.com.ar sacrarium.com.ar > > ; <<>> DiG 9.3.3 <<>> @unhost.com.ar sacrarium.com.ar > ; (1 server found) > ;; global options: printcmd > ;; Got answer: > ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 17321 > ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 > > ;; QUESTION SECTION: > ;sacrarium.com.ar. IN A > > ;; Query time: 2 msec > ;; SERVER: 190.2.50.197#53(190.2.50.197) > ;; WHEN: Tue Dec 25 03:34:40 2007 > ;; MSG SIZE rcvd: 34 > > dig sacrarium.com.ar > > ; <<>> DiG 9.3.3 <<>> sacrarium.com.ar > ;; global options: printcmd > ;; Got answer: > ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 62816 > ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 > > ;; QUESTION SECTION: > ;sacrarium.com.ar. IN A > > ;; Query time: 451 msec > ;; SERVER: 200.69.193.1#53(200.69.193.1) > ;; WHEN: Tue Dec 25 03:35:01 2007 > ;; MSG SIZE rcvd: 34 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 15:28:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2373516A418 for ; Tue, 25 Dec 2007 15:28:34 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from gaia.nimnet.asn.au (nimbin.lnk.telstra.net [139.130.45.143]) by mx1.freebsd.org (Postfix) with ESMTP id 0AE3C13C43E for ; Tue, 25 Dec 2007 15:28:31 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from localhost (smithi@localhost) by gaia.nimnet.asn.au (8.8.8/8.8.8R1.5) with SMTP id CAA08381; Wed, 26 Dec 2007 02:28:23 +1100 (EST) (envelope-from smithi@nimnet.asn.au) Date: Wed, 26 Dec 2007 02:28:22 +1100 (EST) From: Ian Smith To: Sd?vtaker In-Reply-To: <20071225120014.3E3CD16A4C0@hub.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-questions@freebsd.org Subject: Re: Problem setting up DNS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 15:28:34 -0000 On Tue, 25 Dec 2007 03:39:31 -0300 Sd?vtaker wrote: > Hello, im using FBSD 6.2 > > I got 2 domains registered in the local nic and I could get one working > but the second one doesnt :-/ > This is my first attemp to set up a real DNS, so im pretty sure i did > something wrong, i copy/pasted here all the info i think can be usefull, > i can add more data if necesary. > BTW, sorry for my english, it is not my main language. > Thanks for any help. > Sdav > > Info: > > I got this in named.conf: > (...) > zone "unhost.com.ar" { > type master; > file "master/unhost.com.ar"; > allow-transfer { > 202.157.182.142; > }; > }; > > zone "sacrarium.com.ar" { > type master; > file "master/sacrarium.com.ar"; > allow-transfer { > 202.157.182.142; > }; > }; > (...) > > The first one is working the second one is not. > In nic.ar both point to ns1.unhost.com.ar and 202.157.182.142 > (twisted4life free secondary) > > the Zone files are: > master/unhost.com.ar: > $TTL 86400 ; 1 day > unhost.com.ar. IN SOA ns1.unhost.com.ar. admin.unhost.com.ar. ( > 2007102801 ; Serial > 10800 ; Refresh > 3600 ; Retry > 604800 ; Expire > 86400 ; Minimum TTL > ) > > ; DNS Servers > IN NS ns1.unhost.com.ar. You need to list your secondary nameserver here as well, by name not IP, to match the nameservers listed at your NIC. Make sure it's refreshing the zone whenever you update it, given up to 3+ hours (10800s) to do so. Don't forget to increment the Serial whenever you make any changes to your zone. You may also want to reduce your TTL down to say 3600 until it's all working fine and things have propogated out to the world. And each zone should have: localhost IN A 127.0.0.1 > ; MX Records > IN MX 10 mx.unhost.com.ar. > IN A 190.2.50.197 You'll want to make sure the reverse zone file has mx.unhost.com.ar. for 190.2.50.197 too, whether you or you service provider controls that. > ; Machine Names > ns1 IN A 190.2.50.197 > mx IN A 190.2.50.197 > ftp IN A 190.2.50.197 > > ; Aliases > www IN CNAME @ > > > and master/sacrarium.com.ar say: > $TTL 86400 ; 1 day > sacrarium.com.ar. IN SOA ns1.unhost.com.ar. > admin.unhost.com.ar. ( > 2007102801 ; Serial > 10800 ; Refresh > 3600 ; Retry > 604800 ; Expire > 86400 ; Minimum TTL > ) > > ; MX Records > IN MX 10 mx.unhost.com.ar. Oops, you've left out the NS records .. > ; Machine Names > www IN A 190.2.50.197 > > > When i do: > nslookup www.unhost.com.ar > Server: 200.69.193.1 > Address: 200.69.193.1#53 > > Non-authoritative answer: > www.unhost.com.ar canonical name = unhost.com.ar. > Name: unhost.com.ar > Address: 190.2.50.197 > > nslookup www.sacrarium.com.ar > Server: 200.69.193.1 > Address: 200.69.193.1#53 > > ** server can't find www.sacrarium.com.ar: SERVFAIL Yeah, no nameservers listed in the primary zone file. At least one and should be two .. [..] cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 20:45:55 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7A33616A41B for ; Tue, 25 Dec 2007 20:45:55 +0000 (UTC) (envelope-from lists-fbsd@shadypond.com) Received: from mx-outbound01.easydns.com (mailout1.easydns.com [205.210.42.66]) by mx1.freebsd.org (Postfix) with ESMTP id 2EE1D13C44B for ; Tue, 25 Dec 2007 20:45:54 +0000 (UTC) (envelope-from lists-fbsd@shadypond.com) Received: from lilypad.shadypond.com (69-12-173-117.static.humboldt1.com [69.12.173.117]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by mx-outbound01.easydns.com (Postfix) with ESMTP id 542AD4838E for ; Tue, 25 Dec 2007 15:45:26 -0500 (EST) Received: from slider.shadypond.com (slider.shadypond.com [192.168.1.11]) by lilypad.shadypond.com (Postfix) with ESMTP id 12941B841 for ; Tue, 25 Dec 2007 20:45:50 +0000 (UTC) From: Pollywog To: freebsd-questions@freebsd.org Date: Tue, 25 Dec 2007 20:45:16 +0000 MIME-Version: 1.0 Content-Disposition: inline X-Length: 1562 X-UID: 5 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Message-Id: <200712252045.18607.lists-fbsd@shadypond.com> Subject: portupgrade problem with openldap23-server upgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 20:45:55 -0000 I did a portupgrade but when the time comes to upgrade openldap23-server=20 (FreeBSD 6.2) I get this: Stop in /usr/ports/net/openldap23-server. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade.12586= =2E86=20 env UPGRADE_TOOL=3Dportupgrade UPGRADE_PORT=3Dopenldap-server-2.3.38=20 UPGRADE_PORT_VER=3D2.3.38 make reinstall =2D--> Restoring the old version pkg_add: package 'openldap-server-2.3.38' conflicts with=20 openldap-client-2.3.39 pkg_add: -f specified; proceeding anyway ** Fix the installation problem and try again. [Updating the pkgdb in /var/db/pkg ... - 892 packages fo= und=20 (-0 +1) . done] Total Paste Views: 1 =E2=80=94 Trackback (0) =E2=80=94 PermaLink =E2=80=94 = Remove Paste How do I fix this conflict between openldap server and client? BTW I am unable to remove either openldap server or client because they are= =20 required by other ports. From owner-freebsd-questions@FreeBSD.ORG Tue Dec 25 23:48:38 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 32E7916A421 for ; Tue, 25 Dec 2007 23:48:38 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from bene1.itea.ntnu.no (bene1.itea.ntnu.no [IPv6:2001:700:300:3::56]) by mx1.freebsd.org (Postfix) with ESMTP id 63B3113C45D for ; Tue, 25 Dec 2007 23:48:37 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from localhost (localhost [127.0.0.1]) by bene1.itea.ntnu.no (Postfix) with ESMTP id C13293C482 for ; Wed, 26 Dec 2007 00:48:34 +0100 (CET) Received: from maren.thelosingend.net (maren.math.ntnu.no [129.241.211.48]) by bene1.itea.ntnu.no (Postfix) with SMTP id 2C9253C42F for ; Wed, 26 Dec 2007 00:48:28 +0100 (CET) Received: (qmail 40358 invoked by uid 88); 26 Dec 2007 00:48:27 +0100 Received: from maren.math.ntnu.no (HELO weld.ej2.thelosingend.net) (129.241.211.48) by maren.thelosingend.net (qpsmtpd/0.31.1) with ESMTP; Wed, 26 Dec 2007 00:48:27 +0100 Message-ID: <477196C3.3070303@lvor.halvorsen.cc> Date: Wed, 26 Dec 2007 00:48:19 +0100 From: Svein Halvor Halvorsen User-Agent: Thunderbird 2.0.0.9 (X11/20071209) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> In-Reply-To: <20071225015900.GA44779@glitch.rwxrwxrwx.net> X-Enigmail-Version: 0.95.0 OpenPGP: id=9198BB40; url=mailto:pgpkey@svein.halvorsen.cc Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Virus-Scanned: Debian amavisd-new at bene1.itea.ntnu.no Cc: freysman@comcast.net, carpetsmoker@xs4all.nl Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Dec 2007 23:48:38 -0000 Martin Tournoij wrote: > The problem is that the font you're using doesn't support the > character(s) you want to type. > You'll have to change the font in the opera preferences dialog, I > think the bitstream family supports most UTF-8 fonts. > > This site may be useful in testing: > http://people.w3.org/rishida/scripts/uniview/ It doesn't seem to be a font problem. The letters in question (æøå) are visible. I read pages in my own native language on a daily basis, and have no problem viewing these letters. However, if I either enter one of them in the search box built-in Opera, or enter text into input fields on webpages, square boxes appear instead of the letter entered. Also if I enter these letter in eg. a blog comment, other people will read the squares. Svein Halvor From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 00:48:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E08E416A41B for ; Wed, 26 Dec 2007 00:48:15 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from mail.rwxrwxrwx.net (rwxrwxrwx.net [82.93.23.199]) by mx1.freebsd.org (Postfix) with ESMTP id 7BCA813C46E for ; Wed, 26 Dec 2007 00:48:15 +0000 (UTC) (envelope-from carpetsmoker@rwxrwxrwx.net) Received: from localhost (unknown [127.0.0.1]) by mail.rwxrwxrwx.net (Postfix) with ESMTP id 760756D442 for ; Wed, 26 Dec 2007 01:55:52 +0100 (CET) Received: from mail.rwxrwxrwx.net ([127.0.0.1]) by localhost (mail.rwxrwxrwx.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id nfnjm-nNpBVu for ; Wed, 26 Dec 2007 01:55:47 +0100 (CET) Received: by mail.rwxrwxrwx.net (Postfix, from userid 1001) id 6B1C06D43F; Wed, 26 Dec 2007 01:55:47 +0100 (CET) Date: Wed, 26 Dec 2007 01:55:46 +0100 From: Martin Tournoij To: freebsd-questions@freebsd.org Message-ID: <20071226005546.GA51610@glitch.rwxrwxrwx.net> Mail-Followup-To: freebsd-questions@freebsd.org References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> <477196C3.3070303@lvor.halvorsen.cc> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: <477196C3.3070303@lvor.halvorsen.cc> User-Agent: mutt-ng/devel-r804 (FreeBSD) Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 00:48:16 -0000 On Wed 26 Dec 2007 00:12, Svein Halvor Halvorsen wrote: > Martin Tournoij wrote: > > The problem is that the font you're using doesn't support the > > character(s) you want to type. > > You'll have to change the font in the opera preferences dialog, I > > think the bitstream family supports most UTF-8 fonts. > >=20 > > This site may be useful in testing: > > http://people.w3.org/rishida/scripts/uniview/ >=20 > It doesn't seem to be a font problem. The letters in question (=C3=A6=C3= =B8=C3=A5) > are visible. I read pages in my own native language on a daily > basis, and have no problem viewing these letters. > However, if I either enter one of them in the search box built-in > Opera, or enter text into input fields on webpages, square boxes > appear instead of the letter entered. Also if I enter these letter > in eg. a blog comment, other people will read the squares. >=20 > Svein Halvor It's a different setting, make sure that not only "web page normal text" but also the "text field single-line" font is set to a font which supports your Norwegian characters. =20 Regards, Martin Tournoij From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 01:27:39 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 48E9716A420 for ; Wed, 26 Dec 2007 01:27:39 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from bene2.itea.ntnu.no (bene2.itea.ntnu.no [IPv6:2001:700:300:3::57]) by mx1.freebsd.org (Postfix) with ESMTP id 76C9A13C474 for ; Wed, 26 Dec 2007 01:27:38 +0000 (UTC) (envelope-from svein.h@lvor.halvorsen.cc) Received: from localhost (localhost [127.0.0.1]) by bene2.itea.ntnu.no (Postfix) with ESMTP id 7B7D9160415 for ; Wed, 26 Dec 2007 02:27:36 +0100 (CET) Received: from maren.thelosingend.net (maren.math.ntnu.no [129.241.211.48]) by bene2.itea.ntnu.no (Postfix) with SMTP id 9AE27160416 for ; Wed, 26 Dec 2007 02:27:29 +0100 (CET) Received: (qmail 76246 invoked by uid 88); 26 Dec 2007 02:27:29 +0100 Received: from maren.math.ntnu.no (HELO weld.ej2.thelosingend.net) (129.241.211.48) by maren.thelosingend.net (qpsmtpd/0.31.1) with ESMTP; Wed, 26 Dec 2007 02:27:29 +0100 Message-ID: <4771ADF8.60105@lvor.halvorsen.cc> Date: Wed, 26 Dec 2007 02:27:20 +0100 From: Svein Halvor Halvorsen User-Agent: Thunderbird 2.0.0.9 (X11/20071209) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> <477196C3.3070303@lvor.halvorsen.cc> <20071226005546.GA51610@glitch.rwxrwxrwx.net> In-Reply-To: <20071226005546.GA51610@glitch.rwxrwxrwx.net> X-Enigmail-Version: 0.95.0 OpenPGP: id=9198BB40; url=mailto:pgpkey@svein.halvorsen.cc Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Virus-Scanned: Debian amavisd-new at bene2.itea.ntnu.no Cc: carpetsmoker@xs4all.nl Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 01:27:39 -0000 Martin Tournoij wrote: > It's a different setting, make sure that not only > "web page normal text" but also the "text field single-line" font > is set to a font which supports your Norwegian characters. I don't think it's a font issue. I have no trouble viewing æøå even in input fields--I have trouble /entering/ them. Svein Halvor From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 02:02:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AC56C16A419 for ; Wed, 26 Dec 2007 02:02:27 +0000 (UTC) (envelope-from nikola.lecic@anthesphoria.net) Received: from anthesphoria.net (anthesphoria.net [200.46.204.219]) by mx1.freebsd.org (Postfix) with ESMTP id 2046B13C459 for ; Wed, 26 Dec 2007 02:02:26 +0000 (UTC) (envelope-from nikola.lecic@anthesphoria.net) X-Bogosity: No, tests=bogofilter X-DKIM: Sendmail DKIM Filter v2.4.1 anthesphoria.net lBQ22GbS001115 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=anthesphoria.net; s=phero; t=1198634546; bh=TymbBDqsnvcPooY2bybudol/FGchec6MGS6QTX0tc 1g=; l=997; h=X-Bogosity:Date:From:To:Cc:Subject:Message-ID: In-Reply-To:References:X-Mailer:X-Face:X-Operating-System: Mime-Version:Content-Type:Content-Transfer-Encoding; b=Lkaya0n+V0Z Qf/tgDO4M+9CraCdIcjyV1dsPhJNNGh8gbLTY6oNCXSW1FFmu8DWBcqPRthKK+VNkiX CWgLxVGWE1su3jhW59jwagMktLXqzOiAfRgZXdW3X/DFz9oXL3N/k7QnipaZYrNJ8tE 9GJL8L8z/rx+3mJ83ZGiTxC3Ck= Received: from anthesphoria.net (adsl-230-157.eunet.yu [213.198.230.157]) (authenticated bits=0) by anthesphoria.net (8.14.1/8.14.1) with ESMTP id lBQ22GbS001115 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 26 Dec 2007 03:02:24 +0100 (CET) (envelope-from nikola.lecic@anthesphoria.net) Date: Wed, 26 Dec 2007 03:02:08 +0100 From: Nikola =?UTF-8?B?TGXEjWnEhw==?= To: Svein Halvor Halvorsen Message-ID: <20071226030208.5d4a94ab@anthesphoria.net> In-Reply-To: <4771ADF8.60105@lvor.halvorsen.cc> References: <476EA7CE.9040705@lvor.halvorsen.cc> <20071225015900.GA44779@glitch.rwxrwxrwx.net> <477196C3.3070303@lvor.halvorsen.cc> <20071226005546.GA51610@glitch.rwxrwxrwx.net> <4771ADF8.60105@lvor.halvorsen.cc> X-Mailer: Claws Mail 3.1.0 (GTK+ 2.12.1; i386-portbld-freebsd6.2) X-Face: pbl6-.[$G'Fi(Ogs2xlXP-V6{3||$Y[LOYs&~GJoikj'cVjcFC[V7du;;0~6nO= [Vi2?uU1Pq~,=Adj@,T:|"`$AF~il]J.Nz#2pU',Y7.{B;m/?{#sO^Dvo$rnmY6] X-Operating-System: FreeBSD 6.2-RELEASE-p8 Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: carpetsmoker@xs4all.nl, freebsd-questions@freebsd.org Subject: Re: UTF-8 in Opera/FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 02:02:27 -0000 =D0=A3 =D1=81=D1=80=D0=B5=D0=B4=D1=83, 26. =D0=B4=D0=B5=D1=86=D0=B5=D0=BC= =D0=B1=D1=80=D0=B0 2007. =D1=83 02:27:20 +0100 Svein Halvor Halvorsen =D1=98=D0=B5 =D0=BD=D0= =B0=D0=BF=D0=B8=D1=81=D0=B0=D0=BE(=D0=BB=D0=B0): =20 > I don't think it's a font issue. I have no trouble viewing =C3=A6=C3=B8= =C3=A5 even > in input fields--I have trouble /entering/ them. Hi Svein Halvor, I can't reproduce the behaviour you described (I'd agree that's not font problem: the fact that you need two deletes to remove =C3=A6=C3=B8=C3=A5 re= ally looks like a Unicode handling problem). Four ideas: 1. try mail/linux-opera (it's exactly the same version) and see if the same wrong behaviour occurs in it as well 2. try to change locale (mine is en_US.UTF-8) 3. try a fresh start by removing ~/.opera 4. (less likely) try to remove ~/.qt Regards. --=20 Nikola Le=C4=8Di=C4=87 :: =D0=9D=D0=B8=D0=BA=D0=BE=D0=BB=D0=B0 =D0=9B=D0=B5= =D1=87=D0=B8=D1=9B From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 04:21:12 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 33A8416A417 for ; Wed, 26 Dec 2007 04:21:12 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id E4A8913C4E5 for ; Wed, 26 Dec 2007 04:21:11 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBQ4L7JQ094774 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Tue, 25 Dec 2007 22:21:07 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <4771D6B2.6090608@tundraware.com> Date: Tue, 25 Dec 2007 22:21:06 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: FreeBSD Mailing List Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Subject: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: tundra@tundraware.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 04:21:12 -0000 I am building a new server out of both older and brand new components. It is based on a Pentium D 925 and ABIT LG-95Z mobo. The DVD-RW is a Lite-On about a year old with very low hours on it. So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the DVD. But attempting to do this with 6.x (I have tried 6.2R and 6.3-PRE disk #1) causes a hang during boot. The loader gets as far as showing the vertical bar that ordinarily "spins" to show intitial kernel loading progress and the the machine just sits there. There is some further activity on the optical drive at this point and then the cursor sort of jumps around a bit. I've not yet tried swapping the optical drive out - though I doubt this is the problem since I can load the other OSs. I've tried removing and moving memory sticks in case this is a flakey memory problem - no change. I've tried removing the only two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - no change. I have one last ditch thing I will try later tonight which is to force the DVD IDE port into PIO mode and out of DMA mode. But that's it. I am stumped. Ideas anyone? TIA, -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 04:50:04 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E0BC016A417 for ; Wed, 26 Dec 2007 04:50:04 +0000 (UTC) (envelope-from danm@prime.gushi.org) Received: from prime.gushi.org (prime.gushi.org [72.9.101.130]) by mx1.freebsd.org (Postfix) with ESMTP id 9426C13C459 for ; Wed, 26 Dec 2007 04:50:01 +0000 (UTC) (envelope-from danm@prime.gushi.org) Received: from prime.gushi.org (localhost [127.0.0.1]) by prime.gushi.org (8.14.1/8.14.1) with ESMTP id lBQ4nvhP086756 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Tue, 25 Dec 2007 23:49:58 -0500 (EST) (envelope-from danm@prime.gushi.org) DKIM-Signature: v=1; a=rsa-sha1; c=simple/simple; d=prime.gushi.org; s=primegushiorg; t=1198644599; bh=t42Kj4NdSPuQFwmEtEaUsBcLA3k=; h=DomainKey-Signature:Date:From:To:Subject:Message-ID:MIME-Version: Content-Type; b=mMyR+vV8VjSn+eRn/JR5g1HIyYln33oOlovU15Tuh0OlsqCaVr VOvFixvUBwDAFQgmbpII/Kdmh5m8GgbNYvaw== DomainKey-Signature: a=rsa-sha1; s=primegushiorg; d=prime.gushi.org; c=nofws; q=dns; h=received:date:from:to:subject:message-id:mime-version:content-type; b=FXWGcIk80uwebpZGFD8SWsKW/FyXoWNsLdA98KitUXyhdyZoDNHtH6y4iow99Lhyw yLdq4jzO8U3FB0xIL6/XA== Received: (from danm@localhost) by prime.gushi.org (8.14.1/8.13.8/Submit) id lBQ4nvE5086721; Tue, 25 Dec 2007 23:49:57 -0500 (EST) (envelope-from danm) Date: Tue, 25 Dec 2007 23:49:56 -0500 (EST) From: "Dan Mahoney, System Admin" To: questions@freebsd.org Message-ID: <20071225234859.F75015@prime.gushi.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (prime.gushi.org [127.0.0.1]); Tue, 25 Dec 2007 23:49:59 -0500 (EST) Cc: Subject: Portsnap -- update claims "up to date" but it's not. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 04:50:05 -0000 Maybe I'm just doing this completely wrong: prime# portsnap update Ports tree is already up to date. prime# portsnap fetch Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found. Fetching snapshot tag from portsnap3.FreeBSD.org... done. Fetching snapshot metadata... done. Updating from Mon Nov 12 18:16:16 EST 2007 to Tue Dec 25 21:36:54 EST 2007. Fetching 4 metadata patches... done. Applying metadata patches... done. Fetching 4 metadata files... [and so on] Am I using this thing wrong? -Dan -- "I can feel it, comin' back again...Like a rolling thunder chasin' the wind..." -Dan Mahoney, JS, JB & SL, May 10th, 1997, Approx 1AM --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org --------------------------- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 05:02:08 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B788016A417 for ; Wed, 26 Dec 2007 05:02:08 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from comcast-smtp-03.tampflrdc.rr.com (comcast-smtp-03.tampflrdc.rr.com [65.32.5.156]) by mx1.freebsd.org (Postfix) with ESMTP id 7911513C455 for ; Wed, 26 Dec 2007 05:02:08 +0000 (UTC) (envelope-from freysman@comcast.net) Received: from [192.168.1.105] (c-98-199-18-87.hsd1.tx.comcast.net [98.199.18.87]) by comcast-smtp-03.tampflrdc.rr.com (8.13.6/8.13.6) with ESMTP id lBQ52477021402 for ; Wed, 26 Dec 2007 00:02:05 -0500 (EST) From: David J Brooks Organization: KC5WNK To: freebsd-questions@freebsd.org Date: Tue, 25 Dec 2007 23:02:02 -0600 User-Agent: KMail/1.9.7 References: <20071225234859.F75015@prime.gushi.org> In-Reply-To: <20071225234859.F75015@prime.gushi.org> X-Face: +\{75whsIB]=i--WqkV^U>!y`<~%(FUd, DQs, &e1yLt==9%It?7#?n>%Splqb, =?utf-8?q?=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=0A=09lDIEu=25W?= =?utf-8?q?sB7o+6k2n=606Q5Fl?=, vJei{$-.KlHPHu/.~VuE=C[}lQmL}>V1t\yTn2iTwCfM`% MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712252302.02921.freysman@comcast.net> X-Virus-Scanned: Symantec AntiVirus Scan Engine Subject: Re: Portsnap -- update claims "up to date" but it's not. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 05:02:08 -0000 On Tuesday 25 December 2007 10:49:56 pm Dan Mahoney, System Admin wrote: > Maybe I'm just doing this completely wrong: > > prime# portsnap update > Ports tree is already up to date. > prime# portsnap fetch > Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found. > Fetching snapshot tag from portsnap3.FreeBSD.org... done. > Fetching snapshot metadata... done. > Updating from Mon Nov 12 18:16:16 EST 2007 to Tue Dec 25 21:36:54 EST > 2007. > Fetching 4 metadata patches... done. > Applying metadata patches... done. > Fetching 4 metadata files... > [and so on] > > Am I using this thing wrong? Try 'portsnap fetch update' David -- This message is not a substitute for human interaction. From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 05:17:22 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 88F5716A421 for ; Wed, 26 Dec 2007 05:17:22 +0000 (UTC) (envelope-from illoai@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.187]) by mx1.freebsd.org (Postfix) with ESMTP id 62B4C13C4D1 for ; Wed, 26 Dec 2007 05:17:22 +0000 (UTC) (envelope-from illoai@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so2807328rvb.43 for ; Tue, 25 Dec 2007 21:17:22 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=6HPQrDEzdyZsuHNK9uIrc801bpOQLHAPTJTVjK6/mdI=; b=eayqRctaOc3HtJwoU8Rl41a7DNSQYxk5lhrPhXBzl4HqwxXj2VRyyKyapu6BrMc+31GTBooqOao6uenNpNIsQMW2YnrsJ4v/pD9dEUVE/f+pWVUyEjoAQXqclPcXY1IEccBGLK8T3VJ3Gbq3yJfXkwa/b9MfNsCWG0e+4X0BVd8= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=SEryxPsRDeeCQJGT3y0h2hu+2t73NL01NuNC2nr1F6A0d2C9S0Kji/D28nL1G+Jk9Iu1AhETarz0LMCLJiRtObS5CIzDLRnfLUULKeO3jTM122mgkHCrK4wLilqJTr3ljldoA46tiPgeVrrKsZoYam31jHC13Zl9i7fOZpiPmEQ= Received: by 10.141.83.15 with SMTP id k15mr3079252rvl.120.1198644782489; Tue, 25 Dec 2007 20:53:02 -0800 (PST) Received: by 10.141.141.7 with HTTP; Tue, 25 Dec 2007 20:53:02 -0800 (PST) Message-ID: Date: Tue, 25 Dec 2007 22:53:02 -0600 From: "illoai@gmail.com" To: tundra@tundraware.com In-Reply-To: <4771D6B2.6090608@tundraware.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <4771D6B2.6090608@tundraware.com> Cc: FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 05:17:22 -0000 On 25/12/2007, Tim Daneliuk wrote: > I am building a new server out of both older and brand new > components. It is based on a Pentium D 925 and ABIT LG-95Z > mobo. The DVD-RW is a Lite-On about a year old with very > low hours on it. > > So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) > or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the > DVD. But attempting to do this with 6.x (I have tried 6.2R and > 6.3-PRE disk #1) causes a hang during boot. The loader gets > as far as showing the vertical bar that ordinarily "spins" > to show intitial kernel loading progress and the the machine > just sits there. There is some further activity on the optical > drive at this point and then the cursor sort of jumps around a bit. > > I've not yet tried swapping the optical drive out - though I doubt > this is the problem since I can load the other OSs. I've tried > removing and moving memory sticks in case this is a flakey > memory problem - no change. I've tried removing the only > two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - > no change. > > I have one last ditch thing I will try later tonight which is > to force the DVD IDE port into PIO mode and out of DMA mode. > But that's it. I am stumped. Ideas anyone? > If it is not hardware, check your bios settings (and mayhap set back to default or very conservative) (of which the PIO trick may work). Also, 7.0 ran extremely well for me back in Sept., you might try it as an alternative. HTH -- -- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 05:21:46 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 38B5416A46B for ; Wed, 26 Dec 2007 05:21:46 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from alcatraz.sequestered.net (alcatraz.sequestered.net [64.183.71.234]) by mx1.freebsd.org (Postfix) with ESMTP id 1E59C13C43E for ; Wed, 26 Dec 2007 05:21:46 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: singularity@sequestered.net) with ESMTP id B69A96783B ; Tue, 25 Dec 2007 21:03:28 -0800 (PST) Message-ID: <4771E0A0.60008@sequestered.net> Date: Tue, 25 Dec 2007 21:03:28 -0800 From: Jay Chandler User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: "Dan Mahoney, System Admin" References: <20071225234859.F75015@prime.gushi.org> In-Reply-To: <20071225234859.F75015@prime.gushi.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Portsnap -- update claims "up to date" but it's not. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 05:21:46 -0000 Dan Mahoney, System Admin wrote: > Maybe I'm just doing this completely wrong: > > prime# portsnap update > Ports tree is already up to date. > prime# portsnap fetch > Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found. > Fetching snapshot tag from portsnap3.FreeBSD.org... done. > Fetching snapshot metadata... done. > Updating from Mon Nov 12 18:16:16 EST 2007 to Tue Dec 25 21:36:54 EST > 2007. > Fetching 4 metadata patches... done. > Applying metadata patches... done. > Fetching 4 metadata files... > [and so on] > > Am I using this thing wrong? > > -Dan Yup. 'portsnap fetch update' is the command I use-- the reverse order that you're using 'em in. -- Jay Chandler / KB1JWQ Living Legend / Systems Exorcist Today's Excuse: no "any" key on keyboard From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 05:47:17 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 21DBC16A418 for ; Wed, 26 Dec 2007 05:47:17 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id BABD313C442 for ; Wed, 26 Dec 2007 05:47:16 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBQ5lEOb096789 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Tue, 25 Dec 2007 23:47:14 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <4771EAE1.4010501@tundraware.com> Date: Tue, 25 Dec 2007 23:47:13 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 CC: FreeBSD Mailing List References: <4771D6B2.6090608@tundraware.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: tundra@tundraware.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 05:47:17 -0000 illoai@gmail.com wrote: > On 25/12/2007, Tim Daneliuk wrote: >> I am building a new server out of both older and brand new >> components. It is based on a Pentium D 925 and ABIT LG-95Z >> mobo. The DVD-RW is a Lite-On about a year old with very >> low hours on it. >> >> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >> DVD. But attempting to do this with 6.x (I have tried 6.2R and >> 6.3-PRE disk #1) causes a hang during boot. The loader gets >> as far as showing the vertical bar that ordinarily "spins" >> to show intitial kernel loading progress and the the machine >> just sits there. There is some further activity on the optical >> drive at this point and then the cursor sort of jumps around a bit. >> >> I've not yet tried swapping the optical drive out - though I doubt >> this is the problem since I can load the other OSs. I've tried >> removing and moving memory sticks in case this is a flakey >> memory problem - no change. I've tried removing the only >> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >> no change. >> >> I have one last ditch thing I will try later tonight which is >> to force the DVD IDE port into PIO mode and out of DMA mode. >> But that's it. I am stumped. Ideas anyone? >> > > If it is not hardware, check your bios settings (and mayhap > set back to default or very conservative) (of which the PIO > trick may work). I just swapped out the optical drive with a CD-RW - exact same symptoms. Fiddling w/BIOS, seems to make no difference, though I am still poking at it. I am utterly lost - never seen very standard hardware like this that FreeBSD could/would not boot and run on ... -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 06:39:29 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A13A916A417 for ; Wed, 26 Dec 2007 06:39:29 +0000 (UTC) (envelope-from danm@prime.gushi.org) Received: from prime.gushi.org (prime.gushi.org [72.9.101.130]) by mx1.freebsd.org (Postfix) with ESMTP id 6114313C465 for ; Wed, 26 Dec 2007 06:39:29 +0000 (UTC) (envelope-from danm@prime.gushi.org) Received: from prime.gushi.org (localhost [127.0.0.1]) by prime.gushi.org (8.14.1/8.14.1) with ESMTP id lBQ6dPWG096008 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 26 Dec 2007 01:39:26 -0500 (EST) (envelope-from danm@prime.gushi.org) DKIM-Signature: v=1; a=rsa-sha1; c=simple/simple; d=prime.gushi.org; s=primegushiorg; t=1198651167; bh=oWTm8Nx3PS1atgvSFZwHdCDN+t4=; h=DomainKey-Signature:Date:From:To:cc:Subject:In-Reply-To: Message-ID:References:User-Agent:MIME-Version:Content-Type; b=k+/6 jKnTJmMwGc3Ub8IyJWDtZblBPfXeu2zEkazL5Sd99zT1PEdLYjcIgScT2F6XTlcQBJn fzwQdgWnLjbEVWQ== DomainKey-Signature: a=rsa-sha1; s=primegushiorg; d=prime.gushi.org; c=nofws; q=dns; h=received:date:from:to:cc:subject:in-reply-to:message-id: references:user-agent:mime-version:content-type; b=HHm+RNnQjiNs4l4L3p586tbSNe9VkYRM2QW5jBgWJHOmvhiuj/C9SjsZIZF6NF1U0 MDF00k1gmML0JQcrZ8vDw== Received: (from danm@localhost) by prime.gushi.org (8.14.1/8.13.8/Submit) id lBQ6dOUP096007; Wed, 26 Dec 2007 01:39:24 -0500 (EST) (envelope-from danm) Date: Wed, 26 Dec 2007 01:39:24 -0500 (EST) From: "Dan Mahoney, System Admin" To: Jay Chandler In-Reply-To: <4771E0A0.60008@sequestered.net> Message-ID: References: <20071225234859.F75015@prime.gushi.org> <4771E0A0.60008@sequestered.net> User-Agent: Alpine 0.99999 (BSF 796 2007-11-08) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (prime.gushi.org [127.0.0.1]); Wed, 26 Dec 2007 01:39:27 -0500 (EST) Cc: questions@freebsd.org Subject: Re: Portsnap -- update claims "up to date" but it's not. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 06:39:29 -0000 On Tue, 25 Dec 2007, Jay Chandler wrote: > Dan Mahoney, System Admin wrote: >> Maybe I'm just doing this completely wrong: >> >> prime# portsnap update >> Ports tree is already up to date. >> prime# portsnap fetch >> Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found. >> Fetching snapshot tag from portsnap3.FreeBSD.org... done. >> Fetching snapshot metadata... done. >> Updating from Mon Nov 12 18:16:16 EST 2007 to Tue Dec 25 21:36:54 EST 2007. >> Fetching 4 metadata patches... done. >> Applying metadata patches... done. >> Fetching 4 metadata files... >> [and so on] >> >> Am I using this thing wrong? >> >> -Dan > > Yup. 'portsnap fetch update' is the command I use-- the reverse order that > you're using 'em in. Shouldn't I just need one of the two? -Dan -- "You can't call yourself a dork if you don't use UNIX!" -Dan Mahoney, May 1997 --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org --------------------------- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 06:51:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DDFC716A469 for ; Wed, 26 Dec 2007 06:51:49 +0000 (UTC) (envelope-from benfell@lupin.parts-unknown.org) Received: from lupin.parts-unknown.org (lupin.cybernude.org [66.93.170.242]) by mx1.freebsd.org (Postfix) with SMTP id 9B86413C457 for ; Wed, 26 Dec 2007 06:51:49 +0000 (UTC) (envelope-from benfell@lupin.parts-unknown.org) Received: (qmail 86715 invoked by uid 501); 26 Dec 2007 06:25:08 -0000 Date: Tue, 25 Dec 2007 22:25:08 -0800 From: David Benfell To: freebsd-questions@freebsd.org Message-ID: <20071226062508.GA85141@parts-unknown.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="CE+1k2dSO48ffgeK" Content-Disposition: inline In-Reply-To: <200712260038.11546@aldan> X-gnupg-public-key: http://www.parts-unknown.org/gnupg/export-0DD1D1E3 X-stardate: [-29]8716.32 X-moon: The Moon is Waning Gibbous (94% of Full) User-Agent: Mutt/1.5.17 (2007-11-01) Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 06:51:49 -0000 --CE+1k2dSO48ffgeK Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, 26 Dec 2007 00:38:11 -0500, Mikhail Teterin wrote: >=20 > If we want people to give FreeBSD a try in good faith, it is both profoun= dly=20 > stupid and dishonest on our part to claim, we have a working USB-system..= =2E It=20 > does not matter, how great our buffer-sharing VM is, if a home user can't= =20 > process their photos with a FreeBSD-powered computer. >=20 While I have not experienced difficulty with umass, I would have to comment that as near as I can tell, *nothing* else on USB works. Not my scanner, n= or my Treo. Both have worked intermittently in the recent past, so I believe my configu= ration is not at issue. --=20 David Benfell, LCP benfell@parts-unknown.org --- Resume available at http://www.parts-unknown.org/ NOTE: I sign all messages with GnuPG (0DD1D1E3). --CE+1k2dSO48ffgeK Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFHcfPEUd+dMw3R0eMRAhM0AJ0QsQ7v//LCpl6muPHIB6McHVqN5wCfV4N4 OdrLOq8rKwyyb+icpsuTnJk= =B1+r -----END PGP SIGNATURE----- --CE+1k2dSO48ffgeK-- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 06:53:19 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B7BC616A419 for ; Wed, 26 Dec 2007 06:53:19 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id 737E213C4D3 for ; Wed, 26 Dec 2007 06:53:19 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBQ6rEDC098191 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Wed, 26 Dec 2007 00:53:14 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <4771FA59.7010402@tundraware.com> Date: Wed, 26 Dec 2007 00:53:13 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: FreeBSD Mailing List References: <4771D6B2.6090608@tundraware.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: tundra@tundraware.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 06:53:19 -0000 illoai@gmail.com wrote: > On 25/12/2007, Tim Daneliuk wrote: >> I am building a new server out of both older and brand new >> components. It is based on a Pentium D 925 and ABIT LG-95Z >> mobo. The DVD-RW is a Lite-On about a year old with very >> low hours on it. >> >> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >> DVD. But attempting to do this with 6.x (I have tried 6.2R and >> 6.3-PRE disk #1) causes a hang during boot. The loader gets >> as far as showing the vertical bar that ordinarily "spins" >> to show intitial kernel loading progress and the the machine >> just sits there. There is some further activity on the optical >> drive at this point and then the cursor sort of jumps around a bit. >> >> I've not yet tried swapping the optical drive out - though I doubt >> this is the problem since I can load the other OSs. I've tried >> removing and moving memory sticks in case this is a flakey >> memory problem - no change. I've tried removing the only >> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >> no change. >> >> I have one last ditch thing I will try later tonight which is >> to force the DVD IDE port into PIO mode and out of DMA mode. >> But that's it. I am stumped. Ideas anyone? >> > > If it is not hardware, check your bios settings (and mayhap > set back to default or very conservative) (of which the PIO > trick may work). Well ... no amount of BIOS fiddling fixes this problem. > > Also, 7.0 ran extremely well for me back in Sept., you might > try it as an alternative. > I downloaded 7.0-BETA4 and burned the CD - This exhibits the exact same boot time behavior as the earlier 6.x releases. In summary: 1) I can boot 4.x or Linux install CDs. I cannot boot 6.x or 7.x install CD - system hangs at the beginning of loading the kernel and the video cursor starts jumping around - presumably because the program has lost its way. (I am assuming that the "program" having trouble is the loader itself, since the kernel is not yet loaded at this point.) 2) Changing optical drives made no difference. 3) Reordering/removing memory sticks made no difference. I am running a memory test ATM just to be sure, but so far, the memory seems fine. 4) No amount of poking around in the BIOS settings seems to help either. I am starting to suspect the MOBO. If I stick a couple of cards in the two available PCI slots, the system has trouble taking me into the BIOS screen. I have to remove the cards to reliably get into the BIOS settings menu. I wonder if this is one of those situations where there are not enough IRQs to go around. I remain confused ... -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 07:09:41 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C26D216A419 for ; Wed, 26 Dec 2007 07:09:41 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id 7F4E013C46A for ; Wed, 26 Dec 2007 07:09:41 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDESK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id lBQ79d2S093260; Tue, 25 Dec 2007 23:09:40 -0800 (PST) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "FreeBSD Mailing List" Date: Tue, 25 Dec 2007 23:10:46 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 In-Reply-To: <4771FA59.7010402@tundraware.com> Importance: Normal Cc: Subject: RE: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 07:09:41 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Tim Daneliuk > Sent: Tuesday, December 25, 2007 10:53 PM > To: FreeBSD Mailing List > Subject: Re: CDROM Boot Hangs But Only Under 6.x > > > illoai@gmail.com wrote: > > On 25/12/2007, Tim Daneliuk wrote: > >> I am building a new server out of both older and brand new > >> components. It is based on a Pentium D 925 and ABIT LG-95Z > >> mobo. The DVD-RW is a Lite-On about a year old with very > >> low hours on it. > >> > >> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) > >> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the > >> DVD. But attempting to do this with 6.x (I have tried 6.2R and > >> 6.3-PRE disk #1) causes a hang during boot. The loader gets > >> as far as showing the vertical bar that ordinarily "spins" > >> to show intitial kernel loading progress and the the machine > >> just sits there. There is some further activity on the optical > >> drive at this point and then the cursor sort of jumps around a bit. > >> > >> I've not yet tried swapping the optical drive out - though I doubt > >> this is the problem since I can load the other OSs. I've tried > >> removing and moving memory sticks in case this is a flakey > >> memory problem - no change. I've tried removing the only > >> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - > >> no change. > >> > >> I have one last ditch thing I will try later tonight which is > >> to force the DVD IDE port into PIO mode and out of DMA mode. > >> But that's it. I am stumped. Ideas anyone? > >> > > > > If it is not hardware, check your bios settings (and mayhap > > set back to default or very conservative) (of which the PIO > > trick may work). > > Well ... no amount of BIOS fiddling fixes this problem. > > > > > Also, 7.0 ran extremely well for me back in Sept., you might > > try it as an alternative. > > > > I downloaded 7.0-BETA4 and burned the CD - This exhibits the > exact same boot time behavior as the earlier 6.x releases. > > In summary: > > 1) I can boot 4.x or Linux install CDs. I cannot boot 6.x or 7.x > install CD - system hangs at the beginning of loading the kernel > and the video cursor starts jumping around - presumably because > the program has lost its way. (I am assuming that the "program" > having trouble is the loader itself, since the kernel is not yet > loaded at this point.) > > 2) Changing optical drives made no difference. > The boot was changed from 4.x to the later series. I think it was changed from "floppy emulation boot" to "cd boot" or some such nonsense. You can get more info by reading up in the handbook where it talks about how to create a distribution CD. One of the options on the cdburn controls this. If your MB is new it should work. Older MB's have problems with the "new way" to boot off an optical cd. You can try BIOS/CMOS updates from the motherbard mfg if they are available. Sometimes even back-flashing to older BIOS fixes it. > 3) Reordering/removing memory sticks made no difference. I am running > a memory test ATM just to be sure, but so far, the memory seems fine. > > 4) No amount of poking around in the BIOS settings seems to help either. > > I am starting to suspect the MOBO. If I stick a couple of cards in the > two available PCI slots, the system has trouble taking me into the BIOS > screen. I have to remove the cards to reliably get into the BIOS > settings menu. I wonder if this is one of those situations where there > are not enough IRQs to go around. > If it's a new MB the PCI cards are probably too old/slow to work right. Another thing to check is if the MB has any overclock settings turned on, these will screw up booting, going into BIOS, and some PCI cards. Go to BIOS and select "reset to factory settings" which turns off all the go-fast stuff. And make sure you confirm the CPU speed in BIOS with the actual speed stamped on the CPU. Sometimes you just got to stick a floppy disk drive on the thing and boot from the 4 boot floppies then do an FTP install. I have about a dozen servers among the collection I manage that are like this - some are even newer ones. Ted From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 07:15:26 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 24B0016A419 for ; Wed, 26 Dec 2007 07:15:26 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id C1AE813C45B for ; Wed, 26 Dec 2007 07:15:25 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBQ7FKrO001994 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Wed, 26 Dec 2007 01:15:20 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <4771FF87.9030908@tundraware.com> Date: Wed, 26 Dec 2007 01:15:19 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: FreeBSD Mailing List References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: tundra@tundraware.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 07:15:26 -0000 Ted Mittelstaedt wrote: > > If your MB is new it should work. Older MB's have problems with > the "new way" to boot off an optical cd. You can try BIOS/CMOS > updates from the motherbard mfg if they are available. Sometimes > even back-flashing to older BIOS fixes it. This is a brand new ABIT mobo w/latest bios on board. > >> 3) Reordering/removing memory sticks made no difference. I am running >> a memory test ATM just to be sure, but so far, the memory seems fine. >> >> 4) No amount of poking around in the BIOS settings seems to help either. >> >> I am starting to suspect the MOBO. If I stick a couple of cards in the >> two available PCI slots, the system has trouble taking me into the BIOS >> screen. I have to remove the cards to reliably get into the BIOS >> settings menu. I wonder if this is one of those situations where there >> are not enough IRQs to go around. >> > > If it's a new MB the PCI cards are probably too old/slow to work right. I thought that even modern PCI busses would fall back to the old speeds. I've had not trouble with any of my other rather new mobos, running, say, old Adaptec controllers. > > Another thing to check is if the MB has any overclock settings turned > on, these will screw up booting, going into BIOS, and some PCI cards. > Go to BIOS and select "reset to factory settings" which turns off all > the go-fast stuff. And make sure you confirm the CPU speed in BIOS > with the actual speed stamped on the CPU. I've reset the BIOS to the most conservative mode, no overclocking, etc. > > Sometimes you just got to stick a floppy disk drive on the thing and > boot from the 4 boot floppies then do an FTP install. I have about > a dozen servers among the collection I manage that are like this - > some are even newer ones. I would *love* to know just where boot is getting lost. In the case of your servers, do you see the same symptoms I am seeing: The kernel loading progress prompt gets painted (most of the time, sometimes it does not even make it that far) and the booting seizes up? Thanks for your time, ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 08:05:51 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E800616A418 for ; Wed, 26 Dec 2007 08:05:51 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from alcatraz.sequestered.net (alcatraz.sequestered.net [64.183.71.234]) by mx1.freebsd.org (Postfix) with ESMTP id D7DB313C468 for ; Wed, 26 Dec 2007 08:05:51 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: singularity@sequestered.net) with ESMTP id 2F6E06783B ; Wed, 26 Dec 2007 00:05:51 -0800 (PST) Message-ID: <47720B5F.8090407@sequestered.net> Date: Wed, 26 Dec 2007 00:05:51 -0800 From: Jay Chandler User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: "Dan Mahoney, System Admin" References: <20071225234859.F75015@prime.gushi.org> <4771E0A0.60008@sequestered.net> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Portsnap -- update claims "up to date" but it's not. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 08:05:52 -0000 Dan Mahoney, System Admin wrote: > On Tue, 25 Dec 2007, Jay Chandler wrote: > >> Dan Mahoney, System Admin wrote: >>> Maybe I'm just doing this completely wrong: >>> >>> prime# portsnap update >>> Ports tree is already up to date. >>> prime# portsnap fetch >>> Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found. >>> Fetching snapshot tag from portsnap3.FreeBSD.org... done. >>> Fetching snapshot metadata... done. >>> Updating from Mon Nov 12 18:16:16 EST 2007 to Tue Dec 25 21:36:54 >>> EST 2007. >>> Fetching 4 metadata patches... done. >>> Applying metadata patches... done. >>> Fetching 4 metadata files... >>> [and so on] >>> >>> Am I using this thing wrong? >>> >>> -Dan >> >> Yup. 'portsnap fetch update' is the command I use-- the reverse >> order that you're using 'em in. > > Shouldn't I just need one of the two? > > -Dan Nope. fetch fetches the latest snapshot; update unpacks it. extract does the ENTIRE snapshot again, but that's generally not needed after the first time. -- Jay Chandler / KB1JWQ Living Legend / Systems Exorcist Today's Excuse: Vendor no longer supports the product From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 09:57:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A3CC616A41A for ; Wed, 26 Dec 2007 09:57:09 +0000 (UTC) (envelope-from akiril@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.190]) by mx1.freebsd.org (Postfix) with ESMTP id 8A28B13C447 for ; Wed, 26 Dec 2007 09:57:09 +0000 (UTC) (envelope-from akiril@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so2884601rvb.43 for ; Wed, 26 Dec 2007 01:57:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=; b=b4AbEbvJepM53L7+DYvRr9lIoFUuOyeKez93umPBBXAfc+vlolsooyAoh1CZlgr+4b70BRS6VuaDG+ndrSl/pkmlSLfIIp1YS9qKSQeRhaf8lqp3A9bVjyMRAVRwjubWNSHTvt+H134A9CkUtZROd8ngaMFchgAe+OiNSpLy2Vs= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=b/T48r2h3aIVQvoMhwLv7mQK3qXt6liccls3+SyZwkmLUJRUdRtP0c8sx9pyWkbfYJ3WU5khbOUu1QUWvL/6iJGlBEQwwUH55xSJmeoRglwQSANqzk6TahrCS5fiuqkd460arSRnrj31/9UDFA0NcmxTQOH66JJRdJpPErrbsVA= Received: by 10.141.90.17 with SMTP id s17mr3155832rvl.241.1198661422334; Wed, 26 Dec 2007 01:30:22 -0800 (PST) Received: by 10.141.33.5 with HTTP; Wed, 26 Dec 2007 01:30:22 -0800 (PST) Message-ID: <92d9fda70712260130x6f10a546gfa0c5a8b998992e0@mail.gmail.com> Date: Wed, 26 Dec 2007 12:30:22 +0300 From: "Anton Kirillov" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: (no subject) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 09:57:09 -0000 From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 10:54:24 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 533F616A418 for ; Wed, 26 Dec 2007 10:54:24 +0000 (UTC) (envelope-from b.movaqar@adempiere.org) Received: from kedah.mschosting.com (kedah.mschosting.com [202.75.42.90]) by mx1.freebsd.org (Postfix) with ESMTP id 16EAE13C45A for ; Wed, 26 Dec 2007 10:54:24 +0000 (UTC) (envelope-from b.movaqar@adempiere.org) Received: from [85.15.37.37] (port=54432 helo=movaqar) by kedah.mschosting.com with esmtpsa (TLSv1:AES256-SHA:256) (Exim 4.68) (envelope-from ) id 1J7Tu0-00046I-76 for freebsd-questions@freebsd.org; Wed, 26 Dec 2007 18:54:21 +0800 Date: Wed, 26 Dec 2007 14:22:08 +0330 From: Bahman Movaqar To: freebsd-questions@freebsd.org Message-ID: <20071226142208.6962fcf6@movaqar> X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.1; i386-portbld-freebsd6.2) Mime-Version: 1.0 Content-Type: multipart/signed; boundary="Sig_/_CG/uXV/4sf/W3LljyA.r69"; protocol="application/pgp-signature"; micalg=PGP-SHA1 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - kedah.mschosting.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - adempiere.org X-Source: X-Source-Args: X-Source-Dir: Subject: HP Proliant Series X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 10:54:24 -0000 --Sig_/_CG/uXV/4sf/W3LljyA.r69 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Hi all, Does anybody have some experience with HP Proliant DL380 G5? Is it compatible with FreeBSD (in particular 6.2)? Following is the hardware configuration: CPU: Intel Xeon 5160 (2 GHz, FSB 1333) RAM: HP 4GM PC2-5300 DDR2 HDD: 2 x 72GB 3G SAS (15K) Storage Ctrlr: HP Smart Array P400/256 NIC: Broadcom 5721 PCI-Express TIA, --=20 Bahman Movaqar PGP KeyID: 0x0CE28F5C (keyserver2.pgp.com) Give me six lines written by the most honourable of men, and I will find an excuse in them to hang him. -Cardinal Richelieu --Sig_/_CG/uXV/4sf/W3LljyA.r69 Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHcjJYpiYSTAzij1wRAh/3AJoD2Clm1iP+Ya/mtMvPaSmXK3+bDQCeLtDf TvxyLH5V5ZeHSf4KEWHyZYw= =Bk+K -----END PGP SIGNATURE----- --Sig_/_CG/uXV/4sf/W3LljyA.r69-- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 15:22:46 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 38C1516A41B for ; Wed, 26 Dec 2007 15:22:46 +0000 (UTC) (envelope-from ronw@bals.org) Received: from bal.bals.org (bal.bals.org [65.122.161.147]) by mx1.freebsd.org (Postfix) with ESMTP id B3CFB13C448 for ; Wed, 26 Dec 2007 15:22:45 +0000 (UTC) (envelope-from ronw@bals.org) Received: from [192.168.0.35] (cpe-72-185-201-149.tampabay.res.rr.com [72.185.201.149]) (authenticated bits=0) by bal.bals.org (8.14.2/8.14.2) with ESMTP id lBQEiYoT066885; Wed, 26 Dec 2007 09:44:38 -0500 (EST) (envelope-from ronw@bals.org) Message-ID: <477268CF.4060604@bals.org> Date: Wed, 26 Dec 2007 09:44:31 -0500 From: Ron Wilhoite Organization: Bay Area Legal Services, Inc. User-Agent: Thunderbird 2.0.0.9 (X11/20071031) MIME-Version: 1.0 To: Bahman Movaqar References: <20071226142208.6962fcf6@movaqar> In-Reply-To: <20071226142208.6962fcf6@movaqar> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (bal.bals.org [192.168.0.2]); Wed, 26 Dec 2007 09:44:38 -0500 (EST) X-Scanned-By: MIMEDefang 2.63 on 192.168.0.2 Cc: freebsd-questions@freebsd.org Subject: Re: HP Proliant Series X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: ronw@bals.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 15:22:46 -0000 On 12/26/2007 05:52 AM Bahman Movaqar wrote: > Hi all, > > Does anybody have some experience with HP Proliant DL380 G5? Is it > compatible with FreeBSD (in particular 6.2)? Following is the hardware > configuration: > CPU: Intel Xeon 5160 (2 GHz, FSB 1333) > RAM: HP 4GM PC2-5300 DDR2 > HDD: 2 x 72GB 3G SAS (15K) > Storage Ctrlr: HP Smart Array P400/256 > NIC: Broadcom 5721 PCI-Express > Same model, with slightly different CPU and NIC (2x E5355 and BCM5708), installed 6.2 with no problems. Ron Wilhoite From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 15:38:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8162616A418 for ; Wed, 26 Dec 2007 15:38:49 +0000 (UTC) (envelope-from omerfsen@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.183]) by mx1.freebsd.org (Postfix) with ESMTP id 4DF9813C442 for ; Wed, 26 Dec 2007 15:38:49 +0000 (UTC) (envelope-from omerfsen@gmail.com) Received: by py-out-1112.google.com with SMTP id u77so4575192pyb.3 for ; Wed, 26 Dec 2007 07:38:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=8jBDxNutR8bWXKElEFnGPLpxZjjqVHpltiPDCHodw3E=; b=aGgD2Dyo4dWwquu14gPPWYZCHoAprNN7nNYq1Cg/5gOnObB1QKR0gO/9sknJTr3QZoiWA2Ex1w34g/8GMc2pB2SX50tKCGLwFf6v5DUMxLd3QLctwSxlXsBhyxZ+E1M/LLsjkGqcyUx+3SoHYdpUK968iWu6E01FOaZX1CvFCf0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=eiPGjLQvh6+z2wgdaF2Bs/7GOLBHEwN/dLeK7o2/CAu4nz+GYeR9Zde1XSd/V82zA5pIB7s59jGfgQTZKLu6PtYVKlEoTGwml2BAfVmejMKhYepN2tZ4am6pQyIAXF5ZkXxOLgEW9Gwt/8asLR/q1IxLKd3K8YxRAMwAV0hnWoE= Received: by 10.142.230.11 with SMTP id c11mr1877790wfh.25.1198681941748; Wed, 26 Dec 2007 07:12:21 -0800 (PST) Received: by 10.143.12.12 with HTTP; Wed, 26 Dec 2007 07:12:21 -0800 (PST) Message-ID: <75a268720712260712r7ce719c8q9eefb9e6173b649d@mail.gmail.com> Date: Wed, 26 Dec 2007 17:12:21 +0200 From: "Omer Faruk Sen" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: adding diablo-jdk-1.5.0.07.01_8.tbz package in a script X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 15:38:49 -0000 Hi, Is there a way to add a package that requires the acceptance of the license (such as diablo-jdk-1.5.0.07.01_8.tbz) in a script. I have made a yes "yes" | pkg_add diablo-jdk-1.5.0.07.01_8.tbz but it didn't work. Maybe there is an option that can be used somewhere . Best Regards, From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 15:45:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id ADD2216A419 for ; Wed, 26 Dec 2007 15:45:27 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from mta2.srv.hcvlny.cv.net (mta2.srv.hcvlny.cv.net [167.206.4.197]) by mx1.freebsd.org (Postfix) with ESMTP id 93C6C13C459 for ; Wed, 26 Dec 2007 15:45:27 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from flosoft.no-ip.biz (ool-435559b8.dyn.optonline.net [67.85.89.184]) by mta2.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTN00A9XYFIS640@mta2.srv.hcvlny.cv.net> for freebsd-questions@freebsd.org; Wed, 26 Dec 2007 10:45:19 -0500 (EST) Received: from flosoft.no-ip.biz (localhost [IPv6:::1]) by flosoft.no-ip.biz (8.14.2/8.14.2) with ESMTP id lBQFjHBo000341; Wed, 26 Dec 2007 10:45:18 -0500 Date: Wed, 26 Dec 2007 10:45:17 -0500 From: "Aryeh M. Friedman" In-reply-to: <75a268720712260712r7ce719c8q9eefb9e6173b649d@mail.gmail.com> To: Omer Faruk Sen Message-id: <4772770D.2010505@gmail.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7BIT X-Enigmail-Version: 0.95.5 References: <75a268720712260712r7ce719c8q9eefb9e6173b649d@mail.gmail.com> User-Agent: Thunderbird 2.0.0.9 (X11/20071217) Cc: freebsd-questions@freebsd.org Subject: Re: adding diablo-jdk-1.5.0.07.01_8.tbz package in a script X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 15:45:27 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Omer Faruk Sen wrote: > Hi, > > Is there a way to add a package that requires the acceptance of the license > (such as diablo-jdk-1.5.0.07.01_8.tbz) in a script. > > I have made a yes "yes" | pkg_add diablo-jdk-1.5.0.07.01_8.tbz but it didn't > work. Maybe there is an option that can be used somewhere . For legal reasons unlikely... this is funny because I am the author (but not maintainer) an other port that has a similar restriction and was thinking about how to automate it for people who I know have already read and agreed to the license but force people who have not read it to read it (i.e. if your upgrading it doesn't bug you for license acceptance) - -- Aryeh M. Friedman FloSoft Systems http://www.flosoft-systems.com Developer, not business, friendly -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHcncNzIOMjAek4JIRArfSAJ492sV/9My15UCVxnCq2r2v2vCpGgCdFkLI VRafODrEcU0B/t1m2z6YVyA= =bntn -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 17:30:44 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1A35B16A420 for ; Wed, 26 Dec 2007 17:30:44 +0000 (UTC) (envelope-from tutors@k12academics.com) Received: from omr6.networksolutionsemail.com (omr6.networksolutionsemail.com [205.178.146.56]) by mx1.freebsd.org (Postfix) with ESMTP id DDE8413C467 for ; Wed, 26 Dec 2007 17:30:43 +0000 (UTC) (envelope-from tutors@k12academics.com) Received: from mail.networksolutionsemail.com (ns-omr6.mgt.netsol.com [10.49.6.69]) by omr6.networksolutionsemail.com (8.13.6/8.13.6) with SMTP id lBQH6PH4030168 for ; Wed, 26 Dec 2007 12:06:25 -0500 Received: (qmail 13694 invoked by uid 78); 26 Dec 2007 17:06:25 -0000 Received: from unknown (HELO MAIL.K12ACADEMICS.COM.NETSOLMAIL.NET) (75.146.222.110) by ns-omr6.lb.hosting.dc2.netsol.com with SMTP; 26 Dec 2007 17:06:25 -0000 Message-Id: <1198688773.953@K12ACADEMICS.COM.NETSOLMAIL.NET> Date: Wed, 26 Dec 2007 12:06:13 -0500 To: freebsd-questions@freebsd.org From: "Chris Glavin" MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII"; format=flowed Subject: Support Services Proposal X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 17:30:44 -0000 My name is Chris Glavin and I am the editor/owner of K12 Academics. I want to make this email as personal as possible to your business. I want to offer you a profile listing detailing your business to potential new students and their parents who frequent our website in our Support Services Directory. I understand that all money towards advertising must go to businesses who can produce results, and I want you to know K12 Academics has proven to produce referrals for other businesses. I hope that you will give me five minutes to read this email in hopes that you will register your business. I have made it a point to directly contact you and create an email proposal that is both professional and does not appear to seem like a generic email. The directory features Tutors, Educational Consultants, College Consultants, College Admission Consultants, Independent College Consultants, College Admissions Counseling, Learning & Developmental Disability Agencies, SAT Learning Center, SAT Tutors, Education Advisors & Advocates, Psychologists, Speech-Language Pathologists, Educational Diagnosticians, Occupational Therapists, Psychiatrists and Pediatric Neurologists in the U.S To avoid being considered spam I will not mention the pricing for profile listing. To see how much they are visit the directory below http://www.k12academics.com/supportservices.htm To register, visit the link below. Once registration is complete you will receive an automatic email with payment details. Once payment has been received your profile will appear in the directory within 24 hours http://www.k12academics.com/support_register.htm We have a very sophisticated form of marketing for each business. Here is how we promote your listing 1) For your listing we include very specific keywords in the source code of your profile which will attract search engine query's to pick up your listing 2) We have a referral page for those who wish to be emailed when a listing appears in the directory according to what they are looking for (i.e. Speech-Language Pathologist in Connecticut). 3) Your email is included in (1) weekly site update newsletter. Currently we have over 4,000+ members registered 4) Your email is included in (1) Monthly site update newsletter to all Principals, Superintendents & PTA Chapters presidents in your state. This newsletter includes all profile listings which appear in the various directories on our website for their according state. 5) You receive quarterly traffic reports for your profile listing. We have individuals who have created specific user reports which they update daily. Know that we will have a specific file on your business to track user activity. Here are some examples of listing, taken from those who have registered thus far this month: http://www.k12academics.com/clubz_in_home_tutoring.htm http://www.k12academics.com/dr_puff.htm http://www.k12academics.com/ebl_coaching.htm http://www.k12academics.com/enrichment_centers.htm http://www.k12academics.com/protected_tomorrows.htm http://www.k12academics.com/sign_language_people.htm http://www.k12academics.com/study_shack.htm What You Get When you Register! * Complete Business Information * Your Business logo in your listing * 3-4 Action shots of your business * Unlimited Service Listings * Hyperlink directly to your website * Direct link to your email address * Unlimited Word Limit Business Text Description * Professional Profile layout * Direct Target audience (Parents, Students, Schools) * Quarterly Traffic Reports for your profile listing Benefits to Registering * A guarantee of 80-100+ visitors per month (Over 1000 Unique Visitors per year to your profile). If you are a National Organization I guarantee 500-1000+ visitors per month * The Most Professional Business profile layout on the Internet * We are the only directory to provide profile listings for Disability Organizations * Strong Reputation: We are a recognized resource for many State Department of Education Bureaus' and the Library of Congress *Cheap Prices: We provide very cheap prices on the Internet and still provide high referral rates. * K12 Academics caters to your exact audience (Students, Parents) while helping you expand your audience beyond traditional means of advertising. * A large focus of our website is towards disabilities: ADD/HD, Angelman Syndrome, Asperger Syndrome, Autism, Blindness, Cerebral Palsy, C.D.D., Cluttering, Deafness, Downsyndrome, Dyscalculia, Dysgraphia, Dyslexia, Dyspraxia, Mental Retardation, Rett Syndrome, Stuttering, Touretts Syndrome Please let me know if you are interested in registering. I hope that you can trust in K12 Academics to help produce you results. We have established ourselves in 2006 as a very successful directory which produced results for all businesses who registered. In 2007 we plan to be the definitive directory for those who provide Support Services for the disabled. Together we can create a long-standing working relationship which will help produce results for both businesses. If not interested email me with the headline "remove". By sending this you are telling me you never wish to register in this directory, and I will never contact your business again. I strictly adhere to the CAN-Spam Act of 2003. From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 17:53:48 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 478A416A417 for ; Wed, 26 Dec 2007 17:53:48 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from alcatraz.sequestered.net (alcatraz.sequestered.net [64.183.71.234]) by mx1.freebsd.org (Postfix) with ESMTP id 39D1113C455 for ; Wed, 26 Dec 2007 17:53:48 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: singularity@sequestered.net) with ESMTP id C7E676783B ; Wed, 26 Dec 2007 09:53:47 -0800 (PST) Message-ID: <4772952B.3090909@sequestered.net> Date: Wed, 26 Dec 2007 09:53:47 -0800 From: Jay Chandler User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Chris Glavin References: <1198688773.953@K12ACADEMICS.COM.NETSOLMAIL.NET> In-Reply-To: <1198688773.953@K12ACADEMICS.COM.NETSOLMAIL.NET> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Support Services Proposal X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 17:53:48 -0000 Chris Glavin wrote: *snip* Reported as spam to his upstream provider. -- Jay Chandler / KB1JWQ Living Legend / Systems Exorcist Today's Excuse: Vendor no longer supports the product From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 18:30:30 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 18DBA16A418 for ; Wed, 26 Dec 2007 18:30:30 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: from nz-out-0506.google.com (nz-out-0506.google.com [64.233.162.232]) by mx1.freebsd.org (Postfix) with ESMTP id D5B3813C468 for ; Wed, 26 Dec 2007 18:30:29 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: by nz-out-0506.google.com with SMTP id l8so430261nzf.13 for ; Wed, 26 Dec 2007 10:30:29 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=ix7cqA4eMl/VmvrBJPnm/CXt/Jhg/4l3S65nf6dNQWM=; b=J6lI91co8r3Np3jPBe2G9TqNOkn71I/wh04kkCLVp3sm74dwgqgqXbKLai29DA12B0elIcqDdyY8rVE0ixUmgyiE2pfSVPtIkf6bVX76TC804ceQ7VxjyfeVVWqHl5FxuqC6MApPvtikqUrdSEjMvS7WeX656E5RXp83uJIJBek= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=YVyHC7uLv0Sk1qwghNLSHPCGoGlS27mVl2F5WnvZhQNx8w+dEqFD83q1SyTq9GbEBTVjJuSP5bT69HHENxhRX4lJ3u3CnzoUfrsTKCLQI0tZXBmV0YqnY3NQWQU0PRfBMQLPUT1nwrbelZECOLptj1a/PVqauPW9OOeZkSQcnPU= Received: by 10.142.232.20 with SMTP id e20mr2009740wfh.187.1198693828540; Wed, 26 Dec 2007 10:30:28 -0800 (PST) Received: by 10.142.87.9 with HTTP; Wed, 26 Dec 2007 10:30:28 -0800 (PST) Message-ID: Date: Wed, 26 Dec 2007 10:30:28 -0800 From: "Kurt Buff" To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Cc: Subject: Browser-based VPN? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 18:30:30 -0000 I've found this software: http://3sp.com/showSslExplorerCommunity.do but don't see that it's supported under FreeBSD, neither in the docs nor in my ports tree. Has anyone used it in FreeBSD, or has anyone found another package for FreeBSD that offers similar functionality? Thanks, Kurt From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 18:33:44 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C583916A418 for ; Wed, 26 Dec 2007 18:33:44 +0000 (UTC) (envelope-from mailman.msc@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.180]) by mx1.freebsd.org (Postfix) with ESMTP id A85E113C457 for ; Wed, 26 Dec 2007 18:33:44 +0000 (UTC) (envelope-from mailman.msc@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so4470543waf.3 for ; Wed, 26 Dec 2007 10:33:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:mime-version:content-type:content-transfer-encoding:content-disposition; bh=zlEHzzfj3bWrTMZigU1BNE/pjjtQp7e6TYp9Azzk0Rg=; b=Ngqh9EiY5UopGjF3D+Y3ojMJ23mi54sJLvqkuNzM5Nk5ZGYCUeVewLzRwjQDwG9Ro1h4gKObzuKJpQZotuvb86QYFgMxe7uiO/UZhUBq5ZxRfEv7DxC6DJlWWHK19jreSPlZrbJyIh31yffQib0EZSSMdAzvwMpwm9o+NBSPlGw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:mime-version:content-type:content-transfer-encoding:content-disposition; b=cp5HnBKwC8a/n2I73hMSVmbutYMsLNlUGyMtHJW4XOuOQcc1V0GcMXvtgzgdpSaRIGiwhUOfkQhrtKqRijy0+1JmgRrc7726I7qVml31G7pXdy1A+2TN5cnPTIskM8WvWSjxJtN98C8MOseZagD81ySwhKRQbS68woWg3R8Y8tg= Received: by 10.114.178.1 with SMTP id a1mr6375215waf.135.1198694024145; Wed, 26 Dec 2007 10:33:44 -0800 (PST) Received: by 10.115.110.4 with HTTP; Wed, 26 Dec 2007 10:33:44 -0800 (PST) Message-ID: Date: Thu, 27 Dec 2007 02:33:44 +0800 From: "Anjang Aki" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Cc: mailman.msc@gmail.com Subject: Additional flag after 6.2-RELEASE-xx X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 18:33:44 -0000 Hi! Can I know what is this flag after 6.2-RELEASE meaning? $ uname -r 6.2-RELEASE-p7 How come my box doesn't have the flag? $ uname -r 6.2-RELEASE if this is mean kernel updating/compiling hopefully someone can link me to the URL guide to upgrade my box. Thank you and regards, -- -- Anjang Aki -- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 19:16:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7B75E16A481 for ; Wed, 26 Dec 2007 19:16:28 +0000 (UTC) (envelope-from noc@hdk5.net) Received: from guam10.hdk5.net (guam10.hdk5.net [66.180.132.235]) by mx1.freebsd.org (Postfix) with ESMTP id 543C813C447 for ; Wed, 26 Dec 2007 19:16:27 +0000 (UTC) (envelope-from noc@hdk5.net) Received: from [192.168.1.29] (unknown [66.180.149.18]) by guam10.hdk5.net (Postfix) with ESMTP id 2D8815C22; Wed, 26 Dec 2007 09:18:03 -1000 (HST) Message-ID: <4772A88A.3000804@hdk5.net> Date: Wed, 26 Dec 2007 09:16:26 -1000 From: NetOpsCenter User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.9) Gecko/20061211 FreeBSD/i386 SeaMonkey/1.0.7 MIME-Version: 1.0 To: "illoai@gmail.com" References: <4771D6B2.6090608@tundraware.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: tundra@tundraware.com, FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: noc@hdk5.net List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 19:16:28 -0000 illoai@gmail.com wrote: > On 25/12/2007, Tim Daneliuk wrote: > >> I am building a new server out of both older and brand new >> components. It is based on a Pentium D 925 and ABIT LG-95Z >> mobo. The DVD-RW is a Lite-On about a year old with very >> low hours on it. >> >> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >> DVD. But attempting to do this with 6.x (I have tried 6.2R and >> 6.3-PRE disk #1) causes a hang during boot. The loader gets >> as far as showing the vertical bar that ordinarily "spins" >> to show intitial kernel loading progress and the the machine >> just sits there. There is some further activity on the optical >> drive at this point and then the cursor sort of jumps around a bit. >> >> I've not yet tried swapping the optical drive out - though I doubt >> this is the problem since I can load the other OSs. I've tried >> removing and moving memory sticks in case this is a flakey >> memory problem - no change. I've tried removing the only >> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >> no change. >> >> I have one last ditch thing I will try later tonight which is >> to force the DVD IDE port into PIO mode and out of DMA mode. >> But that's it. I am stumped. Ideas anyone? >> >> > > If it is not hardware, check your bios settings (and mayhap > set back to default or very conservative) (of which the PIO > trick may work). > > Also, 7.0 ran extremely well for me back in Sept., you might > try it as an alternative. > > HTH > > Aloha, I had the same problem with a couple of older mobo's . I ended up loading 6.* on a hd on a different machine that I knew worked. I physically moved it to the problem box and it Worked. I think the issue could be the size or the type of HD in my case. Some older mobo bios jam up when a HD is more than 60 gig I have found. ~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740 + http://hawaiidakine.com + http://freebsdinfo.org + noc@hdk5.net + + http://aloha50.net - Supporting - FreeBSD 6.* - 7.* + "All that's really worth doing is what we do for others."- Lewis Carrol From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 19:20:26 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9AA1E16A418 for ; Wed, 26 Dec 2007 19:20:26 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: from nz-out-0506.google.com (nz-out-0506.google.com [64.233.162.233]) by mx1.freebsd.org (Postfix) with ESMTP id 5F05A13C47E for ; Wed, 26 Dec 2007 19:20:26 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: by nz-out-0506.google.com with SMTP id l8so444093nzf.13 for ; Wed, 26 Dec 2007 11:20:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=cd7pieJfbB0l0Y5TqnkajCmgsY6JBxBldWftl3O++is=; b=lOxkAJANUGhj8OSQQ/B3+VQve8VzhFA7/SHGFhxuAR3JgRJPFKqleQRSvOc5Ldoa9fkwFMZdVaVrxYByG41dfjew00UYJYHgO+Ohrh/3d5JUgxsCx4pHT7qgQa+nNcGH50ykwoiGxiutVhrOzdZeXvBwTDdhq9CIYGfDJvzWzOM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KFmbFc2sykv32menK4eCDVBxwMR0k4JVwNwuqXIknp7/tV5cH2p3mOLM5c0sQBLyMVM7qMOBN3PUEZfPb4a10Xma9k/DY+gicKJU3gcN+eBPyw15zHmuAqUiFLCgrmJ1OzETompGXJDc3OLLl/luxUf5uDLdaG1enTWAE+Iezqc= Received: by 10.142.245.10 with SMTP id s10mr2069698wfh.12.1198696823146; Wed, 26 Dec 2007 11:20:23 -0800 (PST) Received: by 10.142.87.9 with HTTP; Wed, 26 Dec 2007 11:20:23 -0800 (PST) Message-ID: Date: Wed, 26 Dec 2007 11:20:23 -0800 From: "Kurt Buff" To: "Peter Boosten" In-Reply-To: <20071226194102.wn5sui6qogc000w4@www.boosten.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20071226194102.wn5sui6qogc000w4@www.boosten.org> Cc: questions@freebsd.org Subject: Re: Browser-based VPN? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 19:20:26 -0000 Cool. Got any notes from your install process, or can you identify where it got hairy? On 12/26/07, Peter Boosten wrote: > Quoting Kurt Buff : > > > I've found this software: > > > > http://3sp.com/showSslExplorerCommunity.do > > > > but don't see that it's supported under FreeBSD, neither in the docs > > nor in my ports tree. > > > > Has anyone used it in FreeBSD, or has anyone found another package for > > FreeBSD that offers similar functionality? > > > Yup, > > Using it right now... it's a bitch to install, but runs like charm. > All software comes from the ports, except sslexplorer itself. > > Peter > > -- > http://www.boosten.org > From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 19:34:14 2007 Return-Path: Delivered-To: questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4CE5416A417 for ; Wed, 26 Dec 2007 19:34:14 +0000 (UTC) (envelope-from darkglobe@rambler.ru) Received: from mxb.rambler.ru (mxb.rambler.ru [81.19.66.30]) by mx1.freebsd.org (Postfix) with ESMTP id 0F7F713C46B for ; Wed, 26 Dec 2007 19:34:13 +0000 (UTC) (envelope-from darkglobe@rambler.ru) Received: from mailc.rambler.ru (mailc.rambler.ru [81.19.66.27]) by mxb.rambler.ru (Postfix) with ESMTP id D61451B97E9 for ; Wed, 26 Dec 2007 22:16:37 +0300 (MSK) Received: from [192.168.0.2] (unknown [77.43.194.123]) (Authenticated sender: darkglobe@rambler.ru) by mailc.rambler.ru (Postfix) with ESMTP id BDCAD621C22 for ; Wed, 26 Dec 2007 22:16:37 +0300 (MSK) Message-ID: <4772A899.4030201@rambler.ru> Date: Thu, 27 Dec 2007 00:16:41 +0500 From: User Elph User-Agent: Thunderbird 2.0.0.6 (X11/20071113) MIME-Version: 1.0 To: questions@FreeBSD.org Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: make buildworld fails. Whats wrong? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 19:34:14 -0000 I have updated a /usr/src from cvs-repositary. But buildworld fails with error code 1 in /usr/src/lib/ libcomm_err/doc. com_err.info - not found. whats wrong? PS. I have installed a FreeBSD-7.0 - BETA4. From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 19:52:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 41AA516A417 for ; Wed, 26 Dec 2007 19:52:27 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from smtp3.utdallas.edu (smtp3.utdallas.edu [129.110.10.49]) by mx1.freebsd.org (Postfix) with ESMTP id 29E2F13C455 for ; Wed, 26 Dec 2007 19:52:27 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from [192.168.2.102] (cpe-24-175-90-48.tx.res.rr.com [24.175.90.48]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp3.utdallas.edu (Postfix) with ESMTP id 80A18654FD for ; Wed, 26 Dec 2007 13:52:26 -0600 (CST) Date: Wed, 26 Dec 2007 13:52:25 -0600 From: Paul Schmehl To: freebsd-questions@freebsd.org Message-ID: <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> In-Reply-To: <20071226062508.GA85141@parts-unknown.org> References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> <20071226062508.GA85141@parts-unknown.org> X-Mailer: Mulberry/4.0.8 (Mac OS X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 19:52:27 -0000 --On December 25, 2007 10:25:08 PM -0800 David Benfell wrote: > On Wed, 26 Dec 2007 00:38:11 -0500, Mikhail Teterin wrote: >> >> If we want people to give FreeBSD a try in good faith, it is both >> profoundly stupid and dishonest on our part to claim, we have a >> working USB-system... It does not matter, how great our buffer-sharing >> VM is, if a home user can't process their photos with a >> FreeBSD-powered computer. >> To the OP of this thread - generalized statements like this aren't very helpful. I have a USB mouse and a USB keyboard, both of which work fine and always have. I mount USB thumb drives frequently to copy and move files back and forth. I have a USB hard drive that is automounted at boot. None of these devices has ever given me problems. I'm not sure what you're referring to, but I suspect it's the "failure" to automount devices without first doing some configuration or to mount devices when you are not logged in as root. > While I have not experienced difficulty with umass, I would have to > comment that as near as I can tell, *nothing* else on USB works. Not my > scanner, nor my Treo. > > Both have worked intermittently in the recent past, so I believe my > configuration is not at issue. These I can't comment on, because I don't use them, although I note that there is a uscanner driver that *should* work for most scanners. Man (4) uscanner has a lenghty list of supported scanners. You might check to see if yours is on the list. Paul Schmehl (pauls@utdallas.edu) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 19:57:08 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DEA3916A417 for ; Wed, 26 Dec 2007 19:57:08 +0000 (UTC) (envelope-from hugo@barafranca.com) Received: from mail.barafranca.com (mail.barafranca.com [67.19.101.164]) by mx1.freebsd.org (Postfix) with ESMTP id C27F913C4E9 for ; Wed, 26 Dec 2007 19:57:08 +0000 (UTC) (envelope-from hugo@barafranca.com) Received: from localhost (localhost [127.0.0.1]) by mail.barafranca.com (Postfix) with ESMTP id 16555C38EA; Wed, 26 Dec 2007 20:04:54 +0000 (UTC) Received: from mail.barafranca.com ([67.19.101.164]) by localhost (mail.barafranca.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 78645-03-3; Wed, 26 Dec 2007 20:04:16 +0000 (UTC) Received: from [10.0.10.40] (adslfixo-b3-115-114.telepac.pt [213.13.115.114]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.barafranca.com (Postfix) with ESMTP id 851E8C39D9; Wed, 26 Dec 2007 19:24:37 +0000 (UTC) Message-ID: <4772A898.7060101@barafranca.com> Date: Wed, 26 Dec 2007 19:16:40 +0000 From: Hugo Silva User-Agent: Thunderbird 2.0.0.9 (X11/20071213) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: amavisd-new at barafranca.com X-Spam-Status: No, score=0 tagged_above=-1 required=4 tests=[none] X-Spam-Score: 0 X-Spam-Level: Cc: Anjang Aki Subject: Re: Additional flag after 6.2-RELEASE-xx X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 19:57:09 -0000 Anjang Aki wrote: > Hi! Can I know what is this flag after 6.2-RELEASE meaning? > > $ uname -r > 6.2-RELEASE-p7 > > How come my box doesn't have the flag? > $ uname -r > 6.2-RELEASE > > if this is mean kernel updating/compiling hopefully someone can link > me to the URL guide to upgrade my box. > > Thank you and regards, > > Hello, -pX is the patchlevel. Both your systems are on RELENG_6_2, one has been updated, the other has not. See http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html Regards, Hugo From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 20:10:13 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 719E916A417 for ; Wed, 26 Dec 2007 20:10:13 +0000 (UTC) (envelope-from peter@boosten.org) Received: from smtpq2.groni1.gr.home.nl (smtpq2.groni1.gr.home.nl [213.51.130.201]) by mx1.freebsd.org (Postfix) with ESMTP id 365DF13C4D3 for ; Wed, 26 Dec 2007 20:10:13 +0000 (UTC) (envelope-from peter@boosten.org) Received: from [213.51.130.188] (port=40663 helo=smtp3.groni1.gr.home.nl) by smtpq2.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7cZv-0006tV-G0; Wed, 26 Dec 2007 21:10:11 +0100 Received: from cp268254-a.landg1.lb.home.nl ([84.25.65.88]:4813 helo=ra.egypt.nl) by smtp3.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7cZu-0006oS-H0; Wed, 26 Dec 2007 21:10:11 +0100 Received: by ra.egypt.nl (Postfix, from userid 80) id D44E43988E; Wed, 26 Dec 2007 21:10:09 +0100 (CET) Received: from VAL00653.egypt.nl (VAL00653.egypt.nl [192.168.13.53]) by www.boosten.org (Horde MIME library) with HTTP; Wed, 26 Dec 2007 21:10:09 +0100 Message-ID: <20071226211009.pcjhazelqss44sck@www.boosten.org> Date: Wed, 26 Dec 2007 21:10:09 +0100 From: Peter Boosten To: Kurt Buff References: <20071226194102.wn5sui6qogc000w4@www.boosten.org> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (4.1.5) X-Spam-Score: 0.0 (/) Cc: questions@freebsd.org Subject: Re: Browser-based VPN? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 20:10:13 -0000 Quoting Kurt Buff : > Cool. > > Got any notes from your install process, or can you identify where =20 > it got hairy? > The main 'problem' is that the installation cannot be automated, since =20 you have to download the java jdk manually (because of the licensing). If you install diablo-jdk and apache-ant from ports you'll be in the =20 right direction. I cannot remember if I had to install anything else, =20 but that'll show automatically. I installed ssl-explorer in /usr/local, left the name of the directory =20 like the ones from the zip and created a link to the directory like =20 this: lrwxr-xr-x 1 root wheel 23 Dec 13 07:48 sslexplorer -> =20 sslexplorer-1.0.0_RC11/ drwxr-xr-x 23 root wheel 1024 Dec 13 07:48 sslexplorer-1.0.0_RC11 That's make upgrading easier. I started of at RC3, and today downloaded RC12= . Initial installation is done via 'ant install' in the main sslexplorer =20 directory (there's a sslexplorer subdir underneath), and sslexplorer =20 then will listen on some exotic port (which I found by accident), I =20 think it's 10080, but netstat will show. After configuring, 'ant =20 start' will start sslexplorer on the port of your settings. Especially =20 cool is the java rdp client! Peter --=20 http://www.boosten.org From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 20:12:54 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4B5E716A417 for ; Wed, 26 Dec 2007 20:12:54 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: from nz-out-0506.google.com (nz-out-0506.google.com [64.233.162.232]) by mx1.freebsd.org (Postfix) with ESMTP id 0D0F013C478 for ; Wed, 26 Dec 2007 20:12:53 +0000 (UTC) (envelope-from kurt.buff@gmail.com) Received: by nz-out-0506.google.com with SMTP id l8so458187nzf.13 for ; Wed, 26 Dec 2007 12:12:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=CPQPUspEeabUV5eUA6OQ4N67UFmxNYgGDwYPhW0FB/U=; b=MZTJPSZ46JwH4PZNr2UvMJwUwOWx9BzNcw4VAGrOI8ztEX35ooujjViQeGqOWTk1A2a7h3Dv6wsIu9n2Up0S0XBOS6cSn8JswNYl/gNb6Rov9gaVacnRqVPfHAaqom2P+ZkIzAhwAokxHGmntSvrAqGu48HXFLHY7VR896pqvMQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=XUpYcRCg+UsbAYHmN6IEtGeYkZ3zIHaCvL9P372Q0quFYMG66gD6iMpxNlWrsIjMPcfPSR5g6ROSfRJCJrNRVV94hEOMfDMr6rKHP+jVb9Ll/xN6L5wH0KQii7lDlW5QMxjfHvmMWFbktE+7C+IhB5xIJtkGTW4DzglHX/7fcnI= Received: by 10.142.194.1 with SMTP id r1mr812518wff.197.1198699971954; Wed, 26 Dec 2007 12:12:51 -0800 (PST) Received: by 10.142.87.9 with HTTP; Wed, 26 Dec 2007 12:12:51 -0800 (PST) Message-ID: Date: Wed, 26 Dec 2007 12:12:51 -0800 From: "Kurt Buff" To: "Peter Boosten" In-Reply-To: <20071226211009.pcjhazelqss44sck@www.boosten.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20071226194102.wn5sui6qogc000w4@www.boosten.org> <20071226211009.pcjhazelqss44sck@www.boosten.org> Cc: questions@freebsd.org Subject: Re: Browser-based VPN? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 20:12:54 -0000 On Dec 26, 2007 12:10 PM, Peter Boosten wrote: > Quoting Kurt Buff : > > > Cool. > > > > Got any notes from your install process, or can you identify where > > it got hairy? > > > The main 'problem' is that the installation cannot be automated, since > you have to download the java jdk manually (because of the licensing). > > If you install diablo-jdk and apache-ant from ports you'll be in the > right direction. I cannot remember if I had to install anything else, > but that'll show automatically. > > I installed ssl-explorer in /usr/local, left the name of the directory > like the ones from the zip and created a link to the directory like > this: > > lrwxr-xr-x 1 root wheel 23 Dec 13 07:48 sslexplorer -> > sslexplorer-1.0.0_RC11/ > drwxr-xr-x 23 root wheel 1024 Dec 13 07:48 sslexplorer-1.0.0_RC11 > > > That's make upgrading easier. I started of at RC3, and today downloaded RC12. > > Initial installation is done via 'ant install' in the main sslexplorer > directory (there's a sslexplorer subdir underneath), and sslexplorer > then will listen on some exotic port (which I found by accident), I > think it's 10080, but netstat will show. After configuring, 'ant > start' will start sslexplorer on the port of your settings. Especially > cool is the java rdp client! > > > Peter > > -- > http://www.boosten.org Thanks for the pointers! I'm going to gin up a new box and play with it this week. The list will probably see questions from me regarding this install... Kurt From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 20:13:30 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D9CA116A469 for ; Wed, 26 Dec 2007 20:13:30 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from mail0.rawbw.com (mail0.rawbw.com [198.144.192.41]) by mx1.freebsd.org (Postfix) with ESMTP id C968013C469 for ; Wed, 26 Dec 2007 20:13:30 +0000 (UTC) (envelope-from yuri@rawbw.com) Received: from mail0.rawbw.com (localhost [127.0.0.1]) by mail0.rawbw.com (8.13.8/8.13.8) with ESMTP id lBQKDKiE052491; Wed, 26 Dec 2007 12:13:20 -0800 (PST) Received: (from www@localhost) by mail0.rawbw.com (8.13.8/8.13.8/Submit) id lBQKDJIn052478; Wed, 26 Dec 2007 12:13:19 -0800 (PST) X-Authentication-Warning: mail0.rawbw.com: www set sender to yuri@rawbw.com using -f Received: from rrcs-74-62-234-29.west.biz.rr.com (rrcs-74-62-234-29.west.biz.rr.com [74.62.234.29]) by webmail.rawbw.com (IMP) with HTTP for ; Wed, 26 Dec 2007 12:13:19 -0800 Message-ID: <1198699999.4772b5df89d47@webmail.rawbw.com> Date: Wed, 26 Dec 2007 12:13:19 -0800 From: Yuri To: Warren Block References: <1197752487.476440a7d31a9@webmail.rawbw.com> <1197752816.476441f06b4b5@webmail.rawbw.com> <20071219173159.S37466@wonkity.com> In-Reply-To: <20071219173159.S37466@wonkity.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.1 X-Originating-IP: 74.62.234.29 Cc: freebsd-questions@freebsd.org Subject: Re: Anybody connected Nikon D300 to FreeBSD as umass? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 20:13:30 -0000 > Shouldn't need that. The camera has to have the USB port set to MSC > ("Mass Storage") instead of MTP/PTP in the menus. My D40 works that > way. Yes, but if umass driver doesn't know about your device it isn't going to attach to it. D40 is already added to umass, D300 should be added in the same way. I already filed a patch for this. Yuri From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 21:00:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5D32E16A418 for ; Wed, 26 Dec 2007 21:00:03 +0000 (UTC) (envelope-from benfell@lupin.parts-unknown.org) Received: from lupin.parts-unknown.org (lupin.cybernude.org [66.93.170.242]) by mx1.freebsd.org (Postfix) with SMTP id 257DB13C4DD for ; Wed, 26 Dec 2007 21:00:03 +0000 (UTC) (envelope-from benfell@lupin.parts-unknown.org) Received: (qmail 75087 invoked by uid 501); 26 Dec 2007 21:00:02 -0000 DomainKey-Status: no signature Date: Wed, 26 Dec 2007 13:00:02 -0800 From: David Benfell To: freebsd-questions@freebsd.org Message-ID: <20071226210002.GA31557@parts-unknown.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> <20071226062508.GA85141@parts-unknown.org> <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="4Ckj6UjgE2iN1+kY" Content-Disposition: inline In-Reply-To: <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> X-gnupg-public-key: http://www.parts-unknown.org/gnupg/export-0DD1D1E3 "From: David Benfell " X-stardate: [-29]8719.26 X-moon: The Moon is Waning Gibbous (90% of Full) User-Agent: Mutt/1.5.17 (2007-11-01) Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 21:00:03 -0000 --4Ckj6UjgE2iN1+kY Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, 26 Dec 2007 13:52:25 -0600, Paul Schmehl wrote: > --On December 25, 2007 10:25:08 PM -0800 David Benfell=20 > wrote: >=20 >=20 > To the OP of this thread - generalized statements like this aren't very= =20 > helpful. I have a USB mouse and a USB keyboard, both of which work fine= =20 > and always have. I mount USB thumb drives frequently to copy and move=20 > files back and forth. I have a USB hard drive that is automounted at boo= t. >=20 Your thumb drives and hard drives are -- duh -- umass. Okay, so the original poster is even having problems with that. I'll concede to an over-generalization, but it is also rather frustrating when I--as an end user--encounter problems with USB that I can't get any response on. When I first posted about problems with my Treo, the suggestion was to try upgrading to 7.0-BETA. I've worked with CURRENT in the past, and have generally had a positive experience, so I cheerfully complied, though I did note that I was moving onto the bleeding edge. I have had serious problems ever since and I will not repeat this mistake. I initially had a little better luck with the Treo, but encountered the "nasty IP bug" (and it was a doozy--I almost spent several hundred dollars that I don't have on another router box from my ISP because all of a sudden my system was both unreliable and my Internet access was unreliable). I ha= ve had to uninstall or disable pieces of software that, in one case, prevented the system from coming all the way up, and in several cases, slowed the sys= tem to less than a crawl. And for all that, connectivity with the Treo is now non-existent, and I've lost the functionality of my scanner. Information on my system can be found at: Inquiries to this list or to freebsd-current have generally yielded no resp= onse. At least with 7.0-RC1, Xorg appears to be more stable. (I noticed my port upgrades rebuilding numerous gnome ports repeatedly.) > None of these devices has ever given me problems. >=20 > I'm not sure what you're referring to, but I suspect it's the "failure" t= o=20 > automount devices without first doing some configuration or to mount=20 > devices when you are not logged in as root. >=20 The state of the documentation here leaves much to be desired. In some cases, information appears to be out of date, and in others, it is simply wrong. And before you complain that I should post reports of these problem= s, see above about the response I get when I encounter problems. Much as I love FreeBSD, and even with a background in computers going back = to the late 1970s (then as a programmer), the environment here does not seem to foster a kind of interaction that solves problems. Having been a programme= r, and having worked in customer service, I know that consumers are the most frustrating people to deal with. But we really need to be your friends. Because that's how you make the product that we all love, better. >> While I have not experienced difficulty with umass, I would have to >> comment that as near as I can tell, *nothing* else on USB works. Not my >> scanner, nor my Treo. >>=20 >> Both have worked intermittently in the recent past, so I believe my >> configuration is not at issue. >=20 > These I can't comment on, because I don't use them, although I note that= =20 > there is a uscanner driver that *should* work for most scanners. Man (4)= =20 > uscanner has a lenghty list of supported scanners. You might check to se= e=20 > if yours is on the list. >=20 There is a conflict in the documentation here. See the man pages for sane, which specify that libusb should be used in place of the uscanner driver. --=20 David Benfell, LCP benfell@parts-unknown.org --- Resume available at http://www.parts-unknown.org/ NOTE: I sign all messages with GnuPG (0DD1D1E3). --4Ckj6UjgE2iN1+kY Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFHcsDSUd+dMw3R0eMRAuOtAJ9Ngwnz01hHXdHg0DRutgynmKmJzQCgizKe Z03SEtB0Pm+zlrNpSAsdnzI= =2fzb -----END PGP SIGNATURE----- --4Ckj6UjgE2iN1+kY-- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 21:07:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5CB6616A419 for ; Wed, 26 Dec 2007 21:07:29 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id 17B0C13C4E9 for ; Wed, 26 Dec 2007 21:07:28 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBQL7PiF031341 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Wed, 26 Dec 2007 15:07:25 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <4772C28D.6000509@tundraware.com> Date: Wed, 26 Dec 2007 15:07:25 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: FreeBSD Mailing List References: <4771D6B2.6090608@tundraware.com> <4772A88A.3000804@hdk5.net> In-Reply-To: <4772A88A.3000804@hdk5.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Tim Daneliuk List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 21:07:29 -0000 NetOpsCenter wrote: > illoai@gmail.com wrote: >> On 25/12/2007, Tim Daneliuk wrote: >> >>> I am building a new server out of both older and brand new >>> components. It is based on a Pentium D 925 and ABIT LG-95Z >>> mobo. The DVD-RW is a Lite-On about a year old with very >>> low hours on it. >>> >>> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >>> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >>> DVD. But attempting to do this with 6.x (I have tried 6.2R and >>> 6.3-PRE disk #1) causes a hang during boot. The loader gets >>> as far as showing the vertical bar that ordinarily "spins" >>> to show intitial kernel loading progress and the the machine >>> just sits there. There is some further activity on the optical >>> drive at this point and then the cursor sort of jumps around a bit. >>> >>> I've not yet tried swapping the optical drive out - though I doubt >>> this is the problem since I can load the other OSs. I've tried >>> removing and moving memory sticks in case this is a flakey >>> memory problem - no change. I've tried removing the only >>> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >>> no change. >>> >>> I have one last ditch thing I will try later tonight which is >>> to force the DVD IDE port into PIO mode and out of DMA mode. >>> But that's it. I am stumped. Ideas anyone? >>> >>> >> >> If it is not hardware, check your bios settings (and mayhap >> set back to default or very conservative) (of which the PIO >> trick may work). >> >> Also, 7.0 ran extremely well for me back in Sept., you might >> try it as an alternative. >> >> HTH >> >> > Aloha, > > I had the same problem with a couple of older mobo's . I ended up > loading 6.* on a hd on a different machine that I knew worked. I > physically moved it to the problem box and it Worked. > > I think the issue could be the size or the type of HD in my case. Some > older mobo bios jam up when a HD is more than 60 gig I have found. > > > ~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740 > + http://hawaiidakine.com + http://freebsdinfo.org + noc@hdk5.net + > + http://aloha50.net - Supporting - FreeBSD 6.* - 7.* + > "All that's really worth doing is what we do for others."- Lewis Carrol > This was a brand new Abit LG-95Z mobo. The solution was to return it and get an Intel mobo instead. Problem fixed. -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 22:11:52 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7951616A418 for ; Wed, 26 Dec 2007 22:11:52 +0000 (UTC) (envelope-from peter@boosten.org) Received: from smtpq1.groni1.gr.home.nl (smtpq1.groni1.gr.home.nl [213.51.130.200]) by mx1.freebsd.org (Postfix) with ESMTP id 3E87613C45A for ; Wed, 26 Dec 2007 22:11:52 +0000 (UTC) (envelope-from peter@boosten.org) Received: from [213.51.130.190] (port=37333 helo=smtp1.groni1.gr.home.nl) by smtpq1.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7bBg-0000Ma-Qz; Wed, 26 Dec 2007 19:41:04 +0100 Received: from cp268254-a.landg1.lb.home.nl ([84.25.65.88]:5043 helo=ra.egypt.nl) by smtp1.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7bBf-0007Px-N2; Wed, 26 Dec 2007 19:41:04 +0100 Received: by ra.egypt.nl (Postfix, from userid 80) id 2A27339885; Wed, 26 Dec 2007 19:41:03 +0100 (CET) Received: from VAL00653.egypt.nl (VAL00653.egypt.nl [192.168.13.53]) by www.boosten.org (Horde MIME library) with HTTP; Wed, 26 Dec 2007 19:41:02 +0100 Message-ID: <20071226194102.wn5sui6qogc000w4@www.boosten.org> Date: Wed, 26 Dec 2007 19:41:02 +0100 From: Peter Boosten To: Kurt Buff References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: 7bit User-Agent: Internet Messaging Program (IMP) H3 (4.1.5) X-Spam-Score: 0.0 (/) Cc: questions@freebsd.org Subject: Re: Browser-based VPN? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 22:11:52 -0000 Quoting Kurt Buff : > I've found this software: > > http://3sp.com/showSslExplorerCommunity.do > > but don't see that it's supported under FreeBSD, neither in the docs > nor in my ports tree. > > Has anyone used it in FreeBSD, or has anyone found another package for > FreeBSD that offers similar functionality? > Yup, Using it right now... it's a bitch to install, but runs like charm. All software comes from the ports, except sslexplorer itself. Peter -- http://www.boosten.org From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 22:34:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6451416A417 for ; Wed, 26 Dec 2007 22:34:04 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id 1F3FA13C45A for ; Wed, 26 Dec 2007 22:34:04 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.1/8.14.1) with ESMTP id lBQMY37e088559; Wed, 26 Dec 2007 15:34:03 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.1/8.14.1/Submit) with ESMTP id lBQMY3fO088556; Wed, 26 Dec 2007 15:34:03 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Wed, 26 Dec 2007 15:34:03 -0700 (MST) From: Warren Block To: Yuri In-Reply-To: <1198699999.4772b5df89d47@webmail.rawbw.com> Message-ID: <20071226151844.Q88508@wonkity.com> References: <1197752487.476440a7d31a9@webmail.rawbw.com> <1197752816.476441f06b4b5@webmail.rawbw.com> <20071219173159.S37466@wonkity.com> <1198699999.4772b5df89d47@webmail.rawbw.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (wonkity.com [127.0.0.1]); Wed, 26 Dec 2007 15:34:03 -0700 (MST) Cc: freebsd-questions@freebsd.org Subject: Re: Anybody connected Nikon D300 to FreeBSD as umass? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 22:34:04 -0000 On Wed, 26 Dec 2007, Yuri wrote: >> Shouldn't need that. The camera has to have the USB port set to MSC >> ("Mass Storage") instead of MTP/PTP in the menus. My D40 works that >> way. > Yes, but if umass driver doesn't know about your device it isn't going to > attach to it. > D40 is already added to umass, D300 should be added in the same way. > I already filed a patch for this. I'm relatively sure it's a generic class of device--there are so many USB storage devices that it seems impractical to have to add them all explicitly. The D40 isn't in umass.c; in fact, the only Nikon camera mentioned in the USB source is the E990. -Warren Block * Rapid City, South Dakota USA From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 22:34:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id ACF1516A41A for ; Wed, 26 Dec 2007 22:34:27 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id 87FE813C459 for ; Wed, 26 Dec 2007 22:34:27 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so4591130waf.3 for ; Wed, 26 Dec 2007 14:34:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=IClLfJ5T3WYcHSSRdSS0O1u4ii4Z3J+CKvvuyr/A/yY=; b=l+ArTxdXrsD7vmvpbYxEtvomTaPsCazn15H0KOm1NZJM/AXbZa6qDx/Jnkye+knE3VZgG3cc2FSypIwqFlvlc/q5W4pzeT2BrdbP/pcoZtXzo5X75m7gdGRQzQ3slPANkZkjUIKo9EhnCyNQyXlWEt+5GxllNpYLfd/Fhby0mkg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=aK5RZRpFD0ktS8kssTXQesGoQS3dzrkOICj/P/q6vG5wpRQx5NPbZcbkHa0ZoNf22zO1jJ5tAs0PJMOeA+qOsHlyiFJmYHn6b6K+CPyQRaK+619nLrsZQsfcP58CNGvRbdnM3AMkkvxIwUZiypV+v2l4wuez8yC7oznsI3LEPa4= Received: by 10.115.77.1 with SMTP id e1mr5615987wal.103.1198708467046; Wed, 26 Dec 2007 14:34:27 -0800 (PST) Received: from ?192.168.0.10? ( [71.221.187.50]) by mx.google.com with ESMTPS id k14sm12304374waf.33.2007.12.26.14.34.26 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 26 Dec 2007 14:34:26 -0800 (PST) From: Andrew Falanga To: freebsd-questions@freebsd.org Date: Wed, 26 Dec 2007 15:34:03 -0700 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712261534.03553.af300wsm@gmail.com> Subject: dovecot questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 22:34:27 -0000 Hi, I'm trying to install and configure Dovecot. Thanks to the efforts of the port maintainer for Dovecot, installation was mindless. However, configuration isn't quite so simple. There were several in this list that suggested the use of Dovecot when I inquired for suggestions as to a good POP/IMAP server. So, I'm hoping that these same folks can offer help in getting me running. The WIKI for Dovecot is helpful, but seems to assume much in terms of what the reader will understand. How do I add users to the system? If I've done my work correctly, I've setup my Dovecot system to store virtual users in a PostgreSQL database. However, how do I add users? Also, with respect to the configuration file (dovecot.conf) why are there so many passdb/userdb? If I have passdb sql "turned on", should I "turn off" all other passdb sections? What is the significance of the userdb static { } section in that file? It appears that it is necessary for use if using a single user to access several mailboxes (i.e. virtual users which is what I want to implement). Is this true? If I'm understanding things correctly, the next, very important item, is how do I setup new users and how would those users then manage things like passwords, etc.? Andy From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 22:45:16 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BCA2116A418 for ; Wed, 26 Dec 2007 22:45:16 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id E5CA813C457 for ; Wed, 26 Dec 2007 22:45:15 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.1/8.14.1) with ESMTP id lBQMjFrw088604; Wed, 26 Dec 2007 15:45:15 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.1/8.14.1/Submit) with ESMTP id lBQMjFAk088601; Wed, 26 Dec 2007 15:45:15 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Wed, 26 Dec 2007 15:45:15 -0700 (MST) From: Warren Block To: Paul Schmehl In-Reply-To: <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> Message-ID: <20071226153541.S88508@wonkity.com> References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> <20071226062508.GA85141@parts-unknown.org> <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (wonkity.com [127.0.0.1]); Wed, 26 Dec 2007 15:45:15 -0700 (MST) Cc: freebsd-questions@freebsd.org Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 22:45:16 -0000 On Wed, 26 Dec 2007, Paul Schmehl wrote: > --On December 25, 2007 10:25:08 PM -0800 David Benfell > wrote: > >> On Wed, 26 Dec 2007 00:38:11 -0500, Mikhail Teterin wrote: >>> >>> If we want people to give FreeBSD a try in good faith, it is both >>> profoundly stupid and dishonest on our part to claim, we have a >>> working USB-system... It does not matter, how great our buffer-sharing >>> VM is, if a home user can't process their photos with a >>> FreeBSD-powered computer. > > To the OP of this thread - generalized statements like this aren't very > helpful. I have a USB mouse and a USB keyboard, both of which work fine and > always have. Well, me too, and a USB scanner which works well. But I understand the frustration. Lately, I was trying to use a card reader with a too-long USB cable. Not only did that not work, but it could slow the system down to nothing or panic it. Fixed with a powered hub... It seems like we need another kind of storage, something that is known to be only mostly data-safe. If the system would gracefully handle unexpected media removals, that would be nice. Not everything is a trustworthy hard drive. The user ought to be able to tell the system "Yes, da0s1 is an msdos filesystem which I'm going to be yanking out at unexpected times. Yes, I know it might lose some data, but at least figure things out and don't panic." -Warren Block * Rapid City, South Dakota USA From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 23:14:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 305B916A417 for ; Wed, 26 Dec 2007 23:14:04 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from smtp.infidyne.com (ds9.infidyne.com [88.80.6.206]) by mx1.freebsd.org (Postfix) with ESMTP id AE9C713C459 for ; Wed, 26 Dec 2007 23:14:03 +0000 (UTC) (envelope-from peter.schuller@infidyne.com) Received: from c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se (c-8216e555.03-51-73746f3.cust.bredbandsbolaget.se [85.229.22.130]) by smtp.infidyne.com (Postfix) with ESMTP id ABBBA759C2; Thu, 27 Dec 2007 00:14:01 +0100 (CET) From: Peter Schuller To: freebsd-questions@freebsd.org Date: Thu, 27 Dec 2007 00:13:50 +0100 User-Agent: KMail/1.9.7 References: <200712261534.03553.af300wsm@gmail.com> In-Reply-To: <200712261534.03553.af300wsm@gmail.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart3547821.RgcfIH46jf"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200712270013.58919.peter.schuller@infidyne.com> Cc: Andrew Falanga Subject: Re: dovecot questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 23:14:04 -0000 --nextPart3547821.RgcfIH46jf Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline > configuration isn't quite so simple. There were several in this list that > suggested the use of Dovecot when I inquired for suggestions as to a good > POP/IMAP server. I'll add my recommendation to that (having used courier in the past). > So, I'm hoping that these same folks can offer help in getting me running. > The WIKI for Dovecot is helpful, but seems to assume much in terms of what > the reader will understand. How do I add users to the system? If I've > done my work correctly, I've setup my Dovecot system to store virtual use= rs > in a PostgreSQL database. However, how do I add users?=20 Dovecot doesn't really care. You provide the method of obtaining the user l= ist=20 from the database, in the form of SQL statements (assuming they differ from= =20 defaults), and it's up to you to make sure this returns the appropriate=20 information (so in other words, dovecot doesn't add users for you). I used to run a pg+dovecot+postfix, but have since moved away from it and I= =20 don't have the configs easily accessible to check out specifics. But=20 googling, this should be useful in terms of providing a bunch of real-world= =20 configuration examples: http://www.gjdv.at/snippets/linux/virtual_mail_hosting > Also, with respect to the configuration file (dovecot.conf) why are there > so many passdb/userdb? If I have passdb sql "turned on", should I "turn > off" all other passdb sections? What is the significance of the userdb > static { } section in that file? It appears that it is necessary for use > if using a single user to access several mailboxes (i.e. virtual users > which is what I want to implement). Is this true? I can't answer each one of the above off hand, but things like uids is=20 controlled by the user database that it sounds like you want to keep in=20 PostgreSQL. This includes the ability to set the uid/gid, which you can hav= e=20 different for each user, the same, or some combination thereof, on a per-us= er=20 basis. Your exact table design is up to you, as long as you can give doveco= t=20 the appropriate SQL statements for obtaining relevant information. > If I'm understanding things correctly, the next, very important item, is > how do I setup new users and how would those users then manage things like > passwords, etc.? This is up to you. dovecot does not provide and user interfaces for managin= g=20 accounts (that I am aware of). Typically a reason to have the user database= =20 in a relational database would be to enable the construction of such=20 interfaces, or perhaps use of existing tools. But unless I am missing=20 something, user management is beyond the scope of what dovecot itself is=20 providing. =2D-=20 / Peter Schuller PGP userID: 0xE9758B7D or 'Peter Schuller ' Key retrieval: Send an E-Mail to getpgpkey@scode.org E-Mail: peter.schuller@infidyne.com Web: http://www.scode.org --nextPart3547821.RgcfIH46jf Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQBHcuA2DNor2+l1i30RAtcXAJ0WiOqjMKfeDAbsw4Q8XjYwVHgeYgCgtIjT X3yfj9OokfkIHwB/zKflMA4= =/d4r -----END PGP SIGNATURE----- --nextPart3547821.RgcfIH46jf-- From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 23:14:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A1F0716A420 for ; Wed, 26 Dec 2007 23:14:34 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from smtp3.utdallas.edu (smtp3.utdallas.edu [129.110.10.49]) by mx1.freebsd.org (Postfix) with ESMTP id 87CC713C442 for ; Wed, 26 Dec 2007 23:14:34 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from [192.168.2.102] (unknown [24.175.90.48]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp3.utdallas.edu (Postfix) with ESMTP id C3910654F2 for ; Wed, 26 Dec 2007 17:14:33 -0600 (CST) Date: Wed, 26 Dec 2007 17:14:31 -0600 From: Paul Schmehl To: freebsd-questions@freebsd.org Message-ID: <3A8ACE339481E6EDC53CDAFF@paul-schmehls-powerbook59.local> In-Reply-To: <20071226153541.S88508@wonkity.com> References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> <20071226062508.GA85141@parts-unknown.org> <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> <20071226153541.S88508@wonkity.com> X-Mailer: Mulberry/4.0.8 (Mac OS X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 23:14:34 -0000 --On December 26, 2007 3:45:15 PM -0700 Warren Block wrote: > > Well, me too, and a USB scanner which works well. But I understand the > frustration. > As do I. > Lately, I was trying to use a card reader with a too-long USB cable. Not > only did that not work, but it could slow the system down to nothing or > panic it. Fixed with a powered hub... > I have encountered numerous problems with USB on Windows as well. Some devices only work when plugged directly in to a port on the box. Some are perfectly happy to share a hub with others. So I don't think *all* of the problems are OS-related. > It seems like we need another kind of storage, something that is known > to be only mostly data-safe. If the system would gracefully handle > unexpected media removals, that would be nice. Not everything is a > trustworthy hard drive. > > The user ought to be able to tell the system "Yes, da0s1 is an msdos > filesystem which I'm going to be yanking out at unexpected times. Yes, > I know it might lose some data, but at least figure things out and don't > panic." > I absolutely agree with this. At a minimum it should be possible to forcibly umount a device that you removed after forgetting to umount it first. If I had the first clue about the code, I'd submit a patch. Paul Schmehl (pauls@utdallas.edu) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 23:26:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7D30916A421 for ; Wed, 26 Dec 2007 23:26:27 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from alcatraz.sequestered.net (alcatraz.sequestered.net [64.183.71.234]) by mx1.freebsd.org (Postfix) with ESMTP id 69E5513C461 for ; Wed, 26 Dec 2007 23:26:27 +0000 (UTC) (envelope-from lists@sequestered.net) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: singularity@sequestered.net) with ESMTP id 9AC0967C1A ; Wed, 26 Dec 2007 15:26:26 -0800 (PST) Message-ID: <4772E321.6070000@sequestered.net> Date: Wed, 26 Dec 2007 15:26:25 -0800 From: Jay Chandler User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Peter Schuller References: <200712261534.03553.af300wsm@gmail.com> <200712270013.58919.peter.schuller@infidyne.com> In-Reply-To: <200712270013.58919.peter.schuller@infidyne.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org, Andrew Falanga Subject: Re: dovecot questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 23:26:27 -0000 Peter Schuller wrote: > > This is up to you. dovecot does not provide and user interfaces for managing > accounts (that I am aware of). Typically a reason to have the user database > in a relational database would be to enable the construction of such > interfaces, or perhaps use of existing tools. But unless I am missing > something, user management is beyond the scope of what dovecot itself is > providing. > > You are correct; I use Postfixadmin to do this personally. -- Jay Chandler / KB1JWQ Living Legend / Systems Exorcist Today's Excuse: Vendor no longer supports the product From owner-freebsd-questions@FreeBSD.ORG Wed Dec 26 23:33:20 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2CD3716A417 for ; Wed, 26 Dec 2007 23:33:20 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (wonkity.com [67.158.26.137]) by mx1.freebsd.org (Postfix) with ESMTP id DF42913C46A for ; Wed, 26 Dec 2007 23:33:19 +0000 (UTC) (envelope-from wblock@wonkity.com) Received: from wonkity.com (localhost [127.0.0.1]) by wonkity.com (8.14.1/8.14.1) with ESMTP id lBQNXJUB088765; Wed, 26 Dec 2007 16:33:19 -0700 (MST) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.14.1/8.14.1/Submit) with ESMTP id lBQNXJsW088762; Wed, 26 Dec 2007 16:33:19 -0700 (MST) (envelope-from wblock@wonkity.com) Date: Wed, 26 Dec 2007 16:33:19 -0700 (MST) From: Warren Block To: Paul Schmehl In-Reply-To: <3A8ACE339481E6EDC53CDAFF@paul-schmehls-powerbook59.local> Message-ID: <20071226162252.X88719@wonkity.com> References: <200712212341.44308@aldan> <200712221313.lBMDDx5M036478@lava.sentex.ca> <200712260038.11546@aldan> <20071226062508.GA85141@parts-unknown.org> <2C4BA76BE60FC029360155FE@paul-schmehls-powerbook59.local> <20071226153541.S88508@wonkity.com> <3A8ACE339481E6EDC53CDAFF@paul-schmehls-powerbook59.local> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (wonkity.com [127.0.0.1]); Wed, 26 Dec 2007 16:33:19 -0700 (MST) Cc: freebsd-questions@freebsd.org Subject: Re: usb/umass, devfs: this sucks X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Dec 2007 23:33:20 -0000 On Wed, 26 Dec 2007, Paul Schmehl wrote: > --On December 26, 2007 3:45:15 PM -0700 Warren Block > wrote: > >> It seems like we need another kind of storage, something that is known >> to be only mostly data-safe. If the system would gracefully handle >> unexpected media removals, that would be nice. Not everything is a >> trustworthy hard drive. >> >> The user ought to be able to tell the system "Yes, da0s1 is an msdos >> filesystem which I'm going to be yanking out at unexpected times. Yes, >> I know it might lose some data, but at least figure things out and don't >> panic." >> > > I absolutely agree with this. At a minimum it should be possible to forcibly > umount a device that you removed after forgetting to umount it first. If I > had the first clue about the code, I'd submit a patch. The code is likely... er, non-trivial, and might reach into some deep places. Maybe a project the FreeBSD Foundation would sponsor? (Seems like there was something about bounty projects being ungood, but maybe I have that wrong. If not, I think a lot of us would be willing to contribute funds to a "Don't Panic: Removable Media" project.) -Warren Block * Rapid City, South Dakota USA From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 00:12:20 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 58BF016A41A for ; Thu, 27 Dec 2007 00:12:20 +0000 (UTC) (envelope-from shieronymus@gmail.com) Received: from hu-out-0506.google.com (hu-out-0506.google.com [72.14.214.228]) by mx1.freebsd.org (Postfix) with ESMTP id C946113C45B for ; Thu, 27 Dec 2007 00:12:19 +0000 (UTC) (envelope-from shieronymus@gmail.com) Received: by hu-out-0506.google.com with SMTP id 28so1993551hub.8 for ; Wed, 26 Dec 2007 16:12:18 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=M6aJKDNWq6f9iTQ7t6GxQsTO5+jRIzKlEwjdW7EOnF8=; b=wWKvTlsuZbZVkyHAlSrb1bmaJh15qJ8Ulas73SoxVaBiiyAgba9mMfMi+9Nwru/2kXKwXzCCrQUaIVqRdiEZvHmySOmYImLv06fSCssMuH2I371HoQQB3WMNb1I//1Gc1oE8DJQZXickDCcm2KSdj74tHiJroRwchbJj6EmEL1w= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type; b=nTQogSRErAreyzREqtm82eOVkbMavonGl/rIF7v8jV+8aYesZIK1FVJN38f+ykf1Qxf0D8YKkbk1n1nXgv8uFePQ3Kt/90TqLLeom8JlaA+hq2ex8u7AnvA2PADG2I7+MYpQnWviJvbSDgoKMEcZyLXNqdV4G8rBYYfJHvzX8KA= Received: by 10.78.147.6 with SMTP id u6mr8923878hud.59.1198713496123; Wed, 26 Dec 2007 15:58:16 -0800 (PST) Received: by 10.78.140.2 with HTTP; Wed, 26 Dec 2007 15:58:16 -0800 (PST) Message-ID: <70d306230712261558n44bf5b90n3df32fd4b961feee@mail.gmail.com> Date: Wed, 26 Dec 2007 16:58:16 -0700 From: "Seth Hieronymus" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Local Ports Started Twice on Boot with 6-Stable X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 00:12:20 -0000 I just noticed this today: With 6-Stable (6.3-PRERELEASE csuped and built today), it appears that my local ports are started multiple times as part of the boot process. I have not been able to find anything obvious. Anyone have any ideas? Thanks for the help, Seth Hieronymus ********************* Here's an excerpt from the console log that shows pureftpd, postfix, apache, and postgresql being started twice, failing the second time: Dec 26 23:47:23 hts3 kernel: savecore: no dumps found Dec 26 23:47:23 hts3 kernel: ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg Dec 26 23:47:23 hts3 kernel: a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Dec 26 23:47:23 hts3 kernel: Initial i386 initialization: Dec 26 23:47:23 hts3 kernel: . Dec 26 23:47:23 hts3 kernel: Additional ABI support: Dec 26 23:47:23 hts3 kernel: . Dec 26 23:47:23 hts3 kernel: Starting pureftpd. Dec 26 23:47:24 hts3 kernel: Running: /usr/local/sbin/pure-ftpd -A -c50 -B -C8 -E -fftp -H -I15 -lpuredb:/usr/local/etc/pureftpd.pdb -L2000:8 -m4 -p15000:20000 -s -U133:022 -u100 -x -X -i -k99 -Z Dec 26 23:47:24 hts3 kernel: Clearing /tmp (X related). Dec 26 23:47:24 hts3 kernel: Starting pureftpd. Dec 26 23:47:24 hts3 kernel: Running: /usr/local/sbin/pure-ftpd -A -c50 -B -C8 -E -fftp -H -I15 -lpuredb:/usr/local/etc/pureftpd.pdb -L2000:8 -m4 -p15000:20000 -s -U133:022 -u100 -x -X -i -k99 -Z Dec 26 23:47:24 hts3 kernel: Dec 26 23:47:24 hts3 pure-ftpd: (?@?) [ERROR] Unable to start a standalone server: [Address already in use] Dec 26 23:47:24 hts3 kernel: Starting local daemons: Dec 26 23:47:24 hts3 kernel: . Dec 26 23:47:24 hts3 kernel: Updating motd Dec 26 23:47:24 hts3 kernel: . Dec 26 23:47:24 hts3 kernel: Mounting late file systems: Dec 26 23:47:24 hts3 kernel: . Dec 26 23:47:24 hts3 kernel: Starting ntpd. Dec 26 23:47:29 hts3 kernel: postfix/postfix-script: starting the Postfix mail system Dec 26 23:47:29 hts3 kernel: Performing sanity check on apache22 configuration: Dec 26 23:47:30 hts3 kernel: Syntax OK Dec 26 23:47:30 hts3 kernel: Starting apache22. Dec 26 23:47:34 hts3 kernel: pg_ctl: another server may be running; trying to start server anyway Dec 26 23:47:35 hts3 kernel: Dec 26 23:47:35 hts3 postgres[668]: [1-1] FATAL: lock file "postmaster.pid" already exists Dec 26 23:47:35 hts3 kernel: Dec 26 23:47:35 hts3 postgres[668]: [1-2] HINT: Is another postmaster (PID 582) running in data directory "/usr/local/postgres/data"? Dec 26 23:47:36 hts3 kernel: pg_ctl: could not start server Dec 26 23:47:36 hts3 kernel: Examine the log output. Dec 26 23:47:36 hts3 kernel: postfix/postfix-script: fatal: the Postfix mail system is already running Dec 26 23:47:36 hts3 kernel: Dec 26 23:47:36 hts3 postfix/postfix-script[676]: fatal: the Postfix mail system is already running Dec 26 23:47:36 hts3 kernel: Performing sanity check on apache22 configuration: Dec 26 23:47:36 hts3 kernel: Syntax OK Dec 26 23:47:36 hts3 kernel: Starting apache22. Dec 26 23:47:36 hts3 kernel: (48)Address already in use: make_sock: could not bind to address 0.0.0.0:80 Dec 26 23:47:36 hts3 kernel: no listening sockets available, shutting down Dec 26 23:47:36 hts3 kernel: Unable to open logs Dec 26 23:47:36 hts3 kernel: Configuring syscons: Dec 26 23:47:36 hts3 kernel: font8x16 Dec 26 23:47:36 hts3 kernel: font8x8 Dec 26 23:47:36 hts3 kernel: blanktime Dec 26 23:47:36 hts3 kernel: screensaver Dec 26 23:47:36 hts3 kernel: . Dec 26 23:47:37 hts3 kernel: Starting sshd. Dec 26 23:47:37 hts3 kernel: Starting cron. Dec 26 23:47:37 hts3 kernel: Local package initialization: Dec 26 23:47:37 hts3 kernel: . Dec 26 23:47:37 hts3 kernel: Dec 26 23:47:37 hts3 kernel: Wed Dec 26 23:47:37 UTC 2007 From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 00:57:29 2007 Return-Path: Delivered-To: questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 99C6816A419 for ; Thu, 27 Dec 2007 00:57:29 +0000 (UTC) (envelope-from danger@FreeBSD.org) Received: from virtual.micronet.sk (smtp.micronet.sk [84.16.32.237]) by mx1.freebsd.org (Postfix) with ESMTP id 5A91F13C459 for ; Thu, 27 Dec 2007 00:57:29 +0000 (UTC) (envelope-from danger@FreeBSD.org) Received: from localhost (localhost [127.0.0.1]) by virtual.micronet.sk (Postfix) with ESMTP id DC30310ED54 for ; Thu, 27 Dec 2007 01:25:59 +0100 (CET) X-Virus-Scanned: by amavisd-new at virtual.micronet.sk Received: from virtual.micronet.sk ([127.0.0.1]) by localhost (virtual.micronet.sk [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id BIvgXGFhxv5X for ; Thu, 27 Dec 2007 01:25:58 +0100 (CET) Received: from DANGER-PC (danger.mcrn.sk [84.16.37.254]) by virtual.micronet.sk (Postfix) with ESMTP id 3DF2410ED55 for ; Thu, 27 Dec 2007 01:25:58 +0100 (CET) Date: Thu, 27 Dec 2007 01:26:22 +0100 From: Daniel Gerzo Organization: The FreeBSD Project X-Priority: 3 (Normal) Message-ID: <1134029487.20071227012622@rulez.sk> To: questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Subject: PV entries X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Daniel Gerzo List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 00:57:29 -0000 Hello questions, I'm getting these messages on my FreeBSD 7.0-RC1 as well as on BETA4 boxes (I haven't noticed it in the past): Dec 27 01:18:49 web1 kernel: Approaching the limit on PV entries, consider increasing either the vm.pmap.shpgperproc or the vm.pmap.pv_entry_max sysctl. I would like to ask, what are these PV entries, in order to be able to tweak these numbers accordingly. Just for the record, following numbers are set (should be defaults): vm.pmap.shpgperproc: 200 vm.pmap.pv_entry_max: 3254323 Thanks. -- Best regards, Daniel mailto:danger@FreeBSD.org From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 02:10:08 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8157D16A417 for ; Thu, 27 Dec 2007 02:10:08 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from be-well.ilk.org (dsl092-078-145.bos1.dsl.speakeasy.net [66.92.78.145]) by mx1.freebsd.org (Postfix) with ESMTP id 4E72213C4DB for ; Thu, 27 Dec 2007 02:10:08 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from Lowell-Desk.lan (Lowell-Desk.lan [172.30.250.6]) by be-well.ilk.org (Postfix) with ESMTP id 9247228430 for ; Wed, 26 Dec 2007 21:10:05 -0500 (EST) Received: by Lowell-Desk.lan (Postfix, from userid 1147) id D11311CCB2; Wed, 26 Dec 2007 21:10:00 -0500 (EST) To: freebsd-questions@freebsd.org References: <54129.66383.qm@web54201.mail.re2.yahoo.com> <44fxxxphbh.fsf@be-well.ilk.org> <20071220195027.GB54762@demeter.hydra> From: Lowell Gilbert Date: Wed, 26 Dec 2007 21:10:00 -0500 In-Reply-To: <20071220195027.GB54762@demeter.hydra> (Chad Perrin's message of "Thu\, 20 Dec 2007 12\:50\:27 -0700") Message-ID: <4463yksxaf.fsf@Lowell-Desk.lan> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.1 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Re: NIS Linux - Ubuntu X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 02:10:08 -0000 Chad Perrin writes: > On Thu, Dec 20, 2007 at 09:32:50AM -0500, Lowell Gilbert wrote: >> RA Cohen writes: >> >> > I am sorry, here is an addendum to my previous post: >> > >> >>>Somehow Ubuntu was given root user >> > permissions<< >> > >> > Actually, upon rereading my notes, Ubuntu was only given permissions of the user doing the login - not root - but we could login with any valid user apparently FreeBSD thought it was presented with a wildcard password. >> > >> > And I can also verify that FreeBSD clients are able to use the password map when x is used instead of * in the map to represent the password. So I can secure the system using the x but still cannot get Ubuntu clients to authenticate. >> >> Sounds like Ubuntu is using the wrong map, probably one where it's >> getting a different and empty field where it expects to find a password. > > The behavior with an asterisk instead of an X is pretty worrisome, > however, and is not strictly Ubuntu's fault. Security of a server should > not rely on the good will and competence of the client developers. I agree with the latter sentence, but not the former. When using NFS (without Kerberos), it is built into the protocol that the server trusts the client on the UID/GID. That is a good reason not to use NFS in an untrusted environment, but there really isn't anything FreeBSD can do about it. From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 03:03:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3455B16A419 for ; Thu, 27 Dec 2007 03:03:11 +0000 (UTC) (envelope-from livia.markoczy@utdallas.edu) Received: from out4.smtp.messagingengine.com (out4.smtp.messagingengine.com [66.111.4.28]) by mx1.freebsd.org (Postfix) with ESMTP id 0BF6413C455 for ; Thu, 27 Dec 2007 03:03:10 +0000 (UTC) (envelope-from livia.markoczy@utdallas.edu) Received: from compute2.internal (compute2.internal [10.202.2.42]) by out1.messagingengine.com (Postfix) with ESMTP id 8428882632 for ; Wed, 26 Dec 2007 21:43:42 -0500 (EST) Received: from heartbeat1.messagingengine.com ([10.202.2.160]) by compute2.internal (MEProxy); Wed, 26 Dec 2007 21:43:42 -0500 X-Sasl-enc: htv+UTfQYPbue/21cibzQfIiQYPYrknDyNBwTnRzcKE/ 1198723422 Received: from [10.1.10.136] (n114.ewd.goldmark.org [72.64.118.114]) by mail.messagingengine.com (Postfix) with ESMTP id 3EB9DA19A for ; Wed, 26 Dec 2007 21:43:42 -0500 (EST) Message-Id: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> From: Livia Markoczy To: User questions Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v915) Date: Wed, 26 Dec 2007 20:43:41 -0600 X-Mailer: Apple Mail (2.915) Subject: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 03:03:11 -0000 I've just installed syslog-ng from ports on 7.0B4. I put the following into /etc/rc.conf syslog_ng_enable="YES" syslog_ng_config="-u daemon" syslog_ng_pid="/var/run/syslog-ng.pid" And my syslog-ng.conf file is very similar to the example one (plus some special destinations for things that come in via UDP). I killed the syslog process and started /usr/local/etc/rc.d/syslog-ng start and everything seemed to start up just fine. No errors reported, runing rc.d/syslog-ng status tells me that it is running, as does ps. But nothing has logged anywhere, including to console, since the time I killed the system syslogd. Any suggestions of where I should look to debug this? -j From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 03:29:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2D2AD16A418 for ; Thu, 27 Dec 2007 03:29:28 +0000 (UTC) (envelope-from jy-p@fixedpointgroup.com) Received: from mail.smartchem.us (mail.smartchem.us [70.227.131.10]) by mx1.freebsd.org (Postfix) with ESMTP id F0C4813C459 for ; Thu, 27 Dec 2007 03:29:27 +0000 (UTC) (envelope-from jy-p@fixedpointgroup.com) Received: from [10.0.0.112] (unknown [10.0.0.112]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.smartchem.us (Postfix) with ESMTP id 1DFB643243 for ; Wed, 26 Dec 2007 21:10:03 -0600 (CST) Message-ID: <4773176E.7060702@fixedpointgroup.com> Date: Wed, 26 Dec 2007 21:09:34 -0600 From: Jacob Yocom-Piatt Organization: Fixed Point Group LLC User-Agent: Mail/News 1.5.0.10 (X11/20070430) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: zfs-geli-zfs: opinions/suggestions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: jy-p@fixedpointgroup.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 03:29:28 -0000 lo all, have a freebsd 7.0-beta4 machine attached to an external disk enclosure and would like feedback on the following setup: have RAID-Z on 4 disks, ZFS volume that takes up entire RAID-Z, use ZVOL from volume for encryption via geli, use .eli (decrypted) device to make another ZFS pool. the idea being "no time/resources wasted doing fscks plus encryption sans hardware RAID". translated to commands this reads: # zpool create p_a raidz /dev/mfid1 /dev/mfid2 /dev/mfid3 /dev/mfid4 # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT p_a 2.72T 4.02G 2.71T 0% ONLINE - # zfs create -V 2048g p_a/vol # geli init -K /root/p_a.key -s 4096 -l 256 /dev/zvol/p_a/vol # geli attach -k /root/p_a.key /dev/zvol/p_a/vol # zpool create a /dev/zvol/p_a/vol.eli i got a reboot while scp-ing some files to /a (only got ~3 GB in) from another machine with the above setup. am currently waiting far too long for a rm -R to complete under /a. will test if any of this behavior is repeatable. i welcome opinions or suggestions on the stability of such a setup (ZFS-geli-ZFS) and if this is not stable, as the reboot i just experienced would indicate, suggestions on alternative configurations that allow use of geli and minimize or eliminate fsck time. i do have a preference for no hardware RAID since it ties us to a particular card. will furnish a proper bug report if the reboots are repeatable in the aforementioned scenario. NOTE: please CC me since i am not yet subscribed to this list cheers, jake -- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 03:40:20 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6A0FB16A469 for ; Thu, 27 Dec 2007 03:40:20 +0000 (UTC) (envelope-from peter@boosten.org) Received: from smtpq1.groni1.gr.home.nl (smtpq1.groni1.gr.home.nl [213.51.130.200]) by mx1.freebsd.org (Postfix) with ESMTP id 2691813C46E for ; Thu, 27 Dec 2007 03:40:20 +0000 (UTC) (envelope-from peter@boosten.org) Received: from [213.51.130.189] (port=53577 helo=smtp2.groni1.gr.home.nl) by smtpq1.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7jbW-0000EM-K7; Thu, 27 Dec 2007 04:40:18 +0100 Received: from cp268254-a.landg1.lb.home.nl ([84.25.65.88]:4965 helo=ra.egypt.nl) by smtp2.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7jbV-0000XU-C1; Thu, 27 Dec 2007 04:40:18 +0100 Received: by ra.egypt.nl (Postfix, from userid 80) id EC35239899; Thu, 27 Dec 2007 04:40:16 +0100 (CET) Received: from xp.egypt.nl (xp.egypt.nl [192.168.13.35]) by www.boosten.org (Horde MIME library) with HTTP; Thu, 27 Dec 2007 04:40:16 +0100 Message-ID: <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> Date: Thu, 27 Dec 2007 04:40:16 +0100 From: Peter Boosten To: Livia Markoczy References: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> In-Reply-To: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (4.1.5) X-Spam-Score: 0.0 (/) Cc: User questions Subject: Re: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 03:40:20 -0000 Quoting Livia Markoczy : > I've just installed syslog-ng from ports on 7.0B4. > > I put the following into /etc/rc.conf > > syslog_ng_enable=3D"YES" > syslog_ng_config=3D"-u daemon" > syslog_ng_pid=3D"/var/run/syslog-ng.pid" > > And my syslog-ng.conf file is very similar to the example one (plus > some special destinations for things that come in via UDP). > > I killed the syslog process and started > > /usr/local/etc/rc.d/syslog-ng start > > and everything seemed to start up just fine. No errors reported, runing > > rc.d/syslog-ng status > > tells me that it is running, as does ps. > > But nothing has logged anywhere, including to console, since the time I > killed the system syslogd. > > Any suggestions of where I should look to debug this? > Yup, file permissions. While your syslog-ng runs as daemon, it has no =20 permission to log to files owned by root (syslogd). I solved that by logging into a different subdir owned by daemon. Peter --=20 http://www.boosten.org From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 04:55:57 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BBDF116A419 for ; Thu, 27 Dec 2007 04:55:57 +0000 (UTC) (envelope-from thenudnik@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.246]) by mx1.freebsd.org (Postfix) with ESMTP id 7025B13C448 for ; Thu, 27 Dec 2007 04:55:57 +0000 (UTC) (envelope-from thenudnik@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so570166anc.13 for ; Wed, 26 Dec 2007 20:55:56 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; bh=k1uKVfsTtxgUrQq/7n6R/HYzq+TboSNLWLeNzqpXN4o=; b=HI5Hdh2om6zbAvbs4is0qEEw3G+DyDXWNbgqBsmoPAQiiNWIjrcZ8rWhMWHRc1KGDInw8sb5POHHEsapgzSggpGpvccNLJLbr7lUcpj26JZ7cHI/Dl3Fd4SjMXwNyzTdl5runXnODdfsou5nuPUSAOzqjFas7XqDHEDH/eePCSk= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=WUOH0hWAQhHo/FkvWANNY6YIO2EHs1yNwMGc0NIXmto4pmG5liGsYIobsSB8DHAWT52ITqQrtpy3kls28tG6RlJf/du2IRa/jnzvbwZsChnBM13RF7EQl/Ts3BteloVq0NGubccef5LO8UBKaEgUjREUhPRnTY100QE2E1mdPh4= Received: by 10.100.167.3 with SMTP id p3mr13789314ane.69.1198731356802; Wed, 26 Dec 2007 20:55:56 -0800 (PST) Received: from ?192.168.2.2? ( [71.52.21.176]) by mx.google.com with ESMTPS id 7sm10643344agb.20.2007.12.26.20.55.55 (version=TLSv1/SSLv3 cipher=RC4-MD5); Wed, 26 Dec 2007 20:55:55 -0800 (PST) Message-ID: <4773305A.9050706@gmail.com> Date: Wed, 26 Dec 2007 23:55:54 -0500 From: "David M. Patronis" User-Agent: Thunderbird 2.0.0.6 (X11/20071022) MIME-Version: 1.0 To: tundra@tundraware.com References: <4771D6B2.6090608@tundraware.com> <4771EAE1.4010501@tundraware.com> In-Reply-To: <4771EAE1.4010501@tundraware.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 04:55:57 -0000 Tim Daneliuk wrote: > illoai@gmail.com wrote: >> On 25/12/2007, Tim Daneliuk wrote: >>> I am building a new server out of both older and brand new >>> components. It is based on a Pentium D 925 and ABIT LG-95Z >>> mobo. The DVD-RW is a Lite-On about a year old with very >>> low hours on it. >>> >>> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >>> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >>> DVD. But attempting to do this with 6.x (I have tried 6.2R and >>> 6.3-PRE disk #1) causes a hang during boot. The loader gets >>> as far as showing the vertical bar that ordinarily "spins" >>> to show intitial kernel loading progress and the the machine >>> just sits there. There is some further activity on the optical >>> drive at this point and then the cursor sort of jumps around a bit. >>> >>> I've not yet tried swapping the optical drive out - though I doubt >>> this is the problem since I can load the other OSs. I've tried >>> removing and moving memory sticks in case this is a flakey >>> memory problem - no change. I've tried removing the only >>> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >>> no change. >>> >>> I have one last ditch thing I will try later tonight which is >>> to force the DVD IDE port into PIO mode and out of DMA mode. >>> But that's it. I am stumped. Ideas anyone? >>> >> >> If it is not hardware, check your bios settings (and mayhap >> set back to default or very conservative) (of which the PIO >> trick may work). > > > > I just swapped out the optical drive with a CD-RW - exact same > symptoms. Fiddling w/BIOS, seems to make no difference, though > I am still poking at it. I am utterly lost - never seen > very standard hardware like this that FreeBSD could/would not > boot and run on ... Response: Its probably an issue with the 6X series. I have experienced something similar and just spoke to someone via this list with a similar problem. In all cases thus far we were able to install using the 7X series. David > > > From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 05:05:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2B37416A417 for ; Thu, 27 Dec 2007 05:05:54 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from ozzie.tundraware.com (ozzie.tundraware.com [75.145.138.73]) by mx1.freebsd.org (Postfix) with ESMTP id BC71513C455 for ; Thu, 27 Dec 2007 05:05:53 +0000 (UTC) (envelope-from tundra@tundraware.com) Received: from [192.168.0.2] (viper.tundraware.com [192.168.0.2]) (authenticated bits=0) by ozzie.tundraware.com (8.14.2/8.14.2) with ESMTP id lBR55ge4039872 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO); Wed, 26 Dec 2007 23:05:42 -0600 (CST) (envelope-from tundra@tundraware.com) Message-ID: <477332A6.3050604@tundraware.com> Date: Wed, 26 Dec 2007 23:05:42 -0600 From: Tim Daneliuk Organization: TundraWare Inc. User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: "David M. Patronis" References: <4771D6B2.6090608@tundraware.com> <4771EAE1.4010501@tundraware.com> <4773305A.9050706@gmail.com> In-Reply-To: <4773305A.9050706@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-tundraware.com-MailScanner-Information: Please contact the ISP for more information X-tundraware.com-MailScanner: Found to be clean X-tundraware.com-MailScanner-From: tundra@tundraware.com X-Spam-Status: No Cc: FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: tundra@tundraware.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 05:05:54 -0000 David M. Patronis wrote: > Tim Daneliuk wrote: >> illoai@gmail.com wrote: >>> On 25/12/2007, Tim Daneliuk wrote: >>>> I am building a new server out of both older and brand new >>>> components. It is based on a Pentium D 925 and ABIT LG-95Z >>>> mobo. The DVD-RW is a Lite-On about a year old with very >>>> low hours on it. >>>> >>>> So ... here's a fun one: I can boot and install FreeBSD 4.x (CD) >>>> or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the >>>> DVD. But attempting to do this with 6.x (I have tried 6.2R and >>>> 6.3-PRE disk #1) causes a hang during boot. The loader gets >>>> as far as showing the vertical bar that ordinarily "spins" >>>> to show intitial kernel loading progress and the the machine >>>> just sits there. There is some further activity on the optical >>>> drive at this point and then the cursor sort of jumps around a bit. >>>> >>>> I've not yet tried swapping the optical drive out - though I doubt >>>> this is the problem since I can load the other OSs. I've tried >>>> removing and moving memory sticks in case this is a flakey >>>> memory problem - no change. I've tried removing the only >>>> two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW - >>>> no change. >>>> >>>> I have one last ditch thing I will try later tonight which is >>>> to force the DVD IDE port into PIO mode and out of DMA mode. >>>> But that's it. I am stumped. Ideas anyone? >>>> >>> >>> If it is not hardware, check your bios settings (and mayhap >>> set back to default or very conservative) (of which the PIO >>> trick may work). >> >> >> >> I just swapped out the optical drive with a CD-RW - exact same >> symptoms. Fiddling w/BIOS, seems to make no difference, though >> I am still poking at it. I am utterly lost - never seen >> very standard hardware like this that FreeBSD could/would not >> boot and run on ... > Response: > > Its probably an issue with the 6X series. I have experienced something > similar and just spoke to someone via this list with a similar problem. > In all cases thus far we were able to install using the 7X series. > > David Not in this case. As I mentioned in a prior post, I tried booting with the 7.0-BETA4 ISO and got the exact same results. -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 05:48:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 23E4816A417 for ; Thu, 27 Dec 2007 05:48:04 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.freebsd.org (Postfix) with ESMTP id 1F8F913C458 for ; Thu, 27 Dec 2007 05:48:02 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id lBR5m0MO042895 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Thu, 27 Dec 2007 12:48:00 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.6/8.12.11) id lBR5m0HT004974; Thu, 27 Dec 2007 12:48:00 +0700 (ICT) Date: Thu, 27 Dec 2007 12:48:00 +0700 (ICT) Message-Id: <200712270548.lBR5m0HT004974@banyan.cs.ait.ac.th> From: Olivier Nicole To: freebsd-questions@freebsd.org X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Subject: dell Power Edge 2950 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 05:48:04 -0000 Hello, This is just to confirm that Dell Power Edge 2950, with Quad Core Xeon E5420 is OK with FreeBSD 6.2/6.3. TIA, Olivier From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 07:50:26 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AB0BF16A418 for ; Thu, 27 Dec 2007 07:50:26 +0000 (UTC) (envelope-from raggen@passagen.se) Received: from av12-2-sn2.hy.skanova.net (av12-2-sn2.hy.skanova.net [81.228.8.186]) by mx1.freebsd.org (Postfix) with ESMTP id 6707113C461 for ; Thu, 27 Dec 2007 07:50:26 +0000 (UTC) (envelope-from raggen@passagen.se) Received: by av12-2-sn2.hy.skanova.net (Postfix, from userid 502) id 018363857F; Thu, 27 Dec 2007 08:50:24 +0100 (CET) Received: from smtp4-2-sn2.hy.skanova.net (smtp4-2-sn2.hy.skanova.net [81.228.8.93]) by av12-2-sn2.hy.skanova.net (Postfix) with ESMTP id DD93538564; Thu, 27 Dec 2007 08:50:24 +0100 (CET) Received: from [192.168.1.31] (81-231-91-25-no41.tbcn.telia.com [81.231.91.25]) by smtp4-2-sn2.hy.skanova.net (Postfix) with ESMTP id 91C4237E45; Thu, 27 Dec 2007 08:50:24 +0100 (CET) Message-ID: <4773593A.2050400@passagen.se> Date: Thu, 27 Dec 2007 08:50:18 +0100 From: Roger Olofsson User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: Jonathan Horne References: <200712241005.45959.freebsd@dfwlp.com> In-Reply-To: <200712241005.45959.freebsd@dfwlp.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 07:50:26 -0000 Jonathan Horne skrev: > i have been wanting to set up the ability to open an entirely new x session to > another box, in a window of my currently running session. xnest is one way > of doing this, but i was wondering if there are any others (perhaps, a little > easier to configure and get going) ? > > cheers, You might want to look at WDM and Fluxbox. There are alot of other window managwers of course but these 2 have small overhead and run very nice. Read more at http://fluxbox-wiki.org/index.php/WDM . There are some tips in the mailing list archive for these to get you started as well. Greetings from Sweden /Roger From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 07:58:56 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5CAC716A417 for ; Thu, 27 Dec 2007 07:58:56 +0000 (UTC) (envelope-from cyberleo@cyberleo.net) Received: from pizzabox.cyberleo.net (alpha.cyberleo.net [198.145.45.10]) by mx1.freebsd.org (Postfix) with ESMTP id 2532B13C458 for ; Thu, 27 Dec 2007 07:58:56 +0000 (UTC) (envelope-from cyberleo@cyberleo.net) Received: (qmail 44823 invoked from network); 27 Dec 2007 07:58:55 -0000 Received: from adsl-75-3-143-174.dsl.chcgil.sbcglobal.net (HELO ?172.16.44.14?) (cyberleo@cyberleo.net@75.3.143.174) by alpha.cyberleo.net with ESMTPA; 27 Dec 2007 07:58:55 -0000 Message-ID: <47735B37.90700@cyberleo.net> Date: Thu, 27 Dec 2007 01:58:47 -0600 From: CyberLeo Kitsana User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: FreeBSD Questions Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: csup update actions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 07:58:56 -0000 Hi! Does anyone know how csup handles updating changed files? Given that each branch of FreeBSD is nearly 500 megabytes in size, and undoubtedly contains a significant number of identical files from branch to branch, I figure it's feasable to create a new branch consisting entirely of files hardlinked from a lower branch, then run csup over that. Would csup properly handle this scenario and unlink/recreate the changed files, or would it update them in-place, and thus destroy the parent branch? Thanks! -- Fuzzy love, -CyberLeo Technical Administrator CyberLeo.Net Webhosting http://www.CyberLeo.Net Furry Peace! - http://wwww.fur.com/peace/ From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 08:35:06 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BB15B16A418 for ; Thu, 27 Dec 2007 08:35:06 +0000 (UTC) (envelope-from bahamasfranks@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id 8B9F413C44B for ; Thu, 27 Dec 2007 08:35:06 +0000 (UTC) (envelope-from bahamasfranks@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so4908609waf.3 for ; Thu, 27 Dec 2007 00:35:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:reply-to:sender:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; bh=I6VxBAWmWsP7Fe81QT1nvCE3YwiCd2w4Utx6GOr/PDU=; b=NALlZbkljDFg+lzMqXRdWfviCXfP6cPeZNKkRtadk4LaUf1jKMOEq+QIlxMB0G4gz3/zL8hrvac9dt6qo5CrnP/yMIIWrskdfN3sSvmRwbuwTkJF31HuLOqJ2ylH0RWyvr05zlwcfsghHl6RXr+raY1lrcPxjzs+eZLmfiS5uKg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:reply-to:sender:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; b=YvhP9K0E3Qz7NCklvBTF4m4mlJdQt5g4qfoCoK+XNj4J7WdjqPgJm3OYkCo0pF1MLzfC/j2DIpceiJ3sARlWs7Jp84kPVKz1svdPqRoscFYAy4H/+YS6qWRhhP+DRvU+lB65IgfygW9OYIkk5dDELPlK7qbmXaH8gQrOqv72kiA= Received: by 10.142.216.9 with SMTP id o9mr2246728wfg.42.1198744505728; Thu, 27 Dec 2007 00:35:05 -0800 (PST) Received: by 10.142.194.10 with HTTP; Thu, 27 Dec 2007 00:35:05 -0800 (PST) Message-ID: <539c60b90712270035m591d1709g107e48fff9d9caee@mail.gmail.com> Date: Thu, 27 Dec 2007 01:35:05 -0700 From: "Steve Franks" Sender: bahamasfranks@gmail.com To: "Jonathan Horne" In-Reply-To: <200712241005.45959.freebsd@dfwlp.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200712241005.45959.freebsd@dfwlp.com> X-Google-Sender-Auth: a6351fc6fb728c3a Cc: freebsd-questions@freebsd.org Subject: Re: remote x session X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: stevefranks@ieee.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 08:35:06 -0000 Perhaps I misunderstand, but I use x11vnc on the 'server' and vncviewer or tightvnc on the 'client'. There are several pages to google on tunneling it thru ssh, and it's much better with latency than sending x iteslf over ssh, I'm told. If you start x11vnc with no options, it will export the current session/desktop, but there is a switch to have it spawn a new x session also. All the other vnc ports only spawn new sessions, and I usually use it to help my wife fix problems when I'm away at the office ;) Best, Steve On Dec 24, 2007 9:05 AM, Jonathan Horne wrote: > i have been wanting to set up the ability to open an entirely new x session to > another box, in a window of my currently running session. xnest is one way > of doing this, but i was wondering if there are any others (perhaps, a little > easier to configure and get going) ? > > cheers, > -- > Jonathan Horne > http://dfwlpiki.dfwlp.org > freebsd@dfwlp.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > -- Steve Franks, KE7BTE Staff Engineer La Palma Devices, LLC http://www.lapalmadevices.com (520) 312-0089 From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 12:23:46 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D168A16A417 for ; Thu, 27 Dec 2007 12:23:46 +0000 (UTC) (envelope-from thenudnik@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.246]) by mx1.freebsd.org (Postfix) with ESMTP id 85CDD13C467 for ; Thu, 27 Dec 2007 12:23:46 +0000 (UTC) (envelope-from thenudnik@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so591841anc.13 for ; Thu, 27 Dec 2007 04:23:45 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; bh=0g5GK2uw7vvgtoneLHTAZAdiuTEgqfbJFe3E5EWc7vU=; b=n4G2s8xUWAsn/+RyNalLsw+J6LNR6uu/YHugvP3LytyMRyFgSFhjVanmU5jMqTS45w8/C2ZuzprjdWxtvYk//2+rSei7/Gsbc+Fk0dcWv+eLjJH/Iwr2H9wThBZFL1Tq1ULYTLNFvt18W92NKUGZenjTD5ObttAvzRd4YeTEw5Y= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=eLcLsfArLEahm4OnFsRKWLwOIh2ftYJeXQqSXowukNrmQ7dcbJNpc9xapsOGJcZhpoTUXnOXz29yfkygPNz0668s1ZKI8YrRr6MoxlwzFUKZSm00j0kICVUWChwX5bJGeK+exmKd1jH4q4qcoyo8B+7UbgDjgjCA2ZlCu/THQEs= Received: by 10.100.123.4 with SMTP id v4mr16418503anc.99.1198758225775; Thu, 27 Dec 2007 04:23:45 -0800 (PST) Received: from ?192.168.2.2? ( [71.52.21.176]) by mx.google.com with ESMTPS id c14sm9913082ana.21.2007.12.27.04.23.44 (version=TLSv1/SSLv3 cipher=RC4-MD5); Thu, 27 Dec 2007 04:23:44 -0800 (PST) Message-ID: <4773994F.40707@gmail.com> Date: Thu, 27 Dec 2007 07:23:43 -0500 From: "David M. Patronis" User-Agent: Thunderbird 2.0.0.6 (X11/20071022) MIME-Version: 1.0 To: tundra@tundraware.com References: <4771D6B2.6090608@tundraware.com> <4771EAE1.4010501@tundraware.com> <4773305A.9050706@gmail.com> <477332A6.3050604@tundraware.com> In-Reply-To: <477332A6.3050604@tundraware.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 12:23:46 -0000 > > Not in this case. As I mentioned in a prior post, I tried booting > with the 7.0-BETA4 ISO and got the exact same results. Response: Yes, sorry about that; was in too much of a hurry and missed the later posts. David > > From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 12:32:46 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7734C16A421 for ; Thu, 27 Dec 2007 12:32:46 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from app03.fccn.pt (app02.fccn.pt [193.137.198.37]) by mx1.freebsd.org (Postfix) with ESMTP id C64DD13C43E for ; Thu, 27 Dec 2007 12:32:45 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from mx.anubis.local (ste [10.1.2.2]) by ste.anubis.internal (Postfix) with ESMTP id 40F6F19FC39 for ; Thu, 27 Dec 2007 12:32:43 +0000 (WET) Received: from janus (janus.corp.fccn.pt [193.136.44.31]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (No client certificate requested) by mx.anubis.local (Postfix) with ESMTP id 1A2841B4450 for ; Thu, 27 Dec 2007 12:32:43 +0000 (WET) From: =?iso-8859-1?Q?Nuno_Gon=E7alves?= To: Date: Thu, 27 Dec 2007 12:32:41 -0000 Message-ID: <00fe01c84884$93ba1d30$1f2c88c1@corp.fccn.pt> MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook 11 Thread-index: AchIhJJuMG+3HssyQnSz0ikpSX5lxw== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 X-Warning-Anubis: User opted out of Anti-Virus checks X-Warning-Anubis: User opted out of Anti-Spam checks X-Content-Checker: AnubisNetworks MPS Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Changing boot partition X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 12:32:46 -0000 Hi all, =20 I Have a FreeBSD booting ok. It=92s FSTAB is like this: #Device MountPoint FStype Options /dev/ad1s1b none swap sw /dev/ad1s1a / ufs rw /dev/acd0 /cdrom cd9660 ro,noauto /dev/ad1s2d /backup ufs rw =20 When I boot the machine the boot manager shows me F1 and F2 to boot for. F1 brings me /dev/ad1s1a OK Still I want the machine to boot to /dev/ad1s2d This partition has a backup from another FreeBSD which I want to boot. =20 To accomplish this, I need only to change FSTAB ? What changes should I do ? changing /dev/ad1s2d to /dev/ad1s2a ? I read = that a means boot root partition =20 I tried to change FSTAB to=20 #Device MountPoint FStype Options /dev/ad1s1b none swap sw #/dev/ad1s1a / ufs rw /dev/acd0 /cdrom cd9660 ro,noauto /dev/ad1s2a /backup ufs rw =20 And it hanged when I pressed F1 (could not mount the root partition :P ) =20 Could you guys give any hint ? Sorry about this questions but I am a newbie to FreeBSD =20 Thanks once again Nuno From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 13:38:37 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E2EB116A41B for ; Thu, 27 Dec 2007 13:38:37 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from mta5.srv.hcvlny.cv.net (mta5.srv.hcvlny.cv.net [167.206.4.200]) by mx1.freebsd.org (Postfix) with ESMTP id B92FE13C448 for ; Thu, 27 Dec 2007 13:38:37 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from flosoft.no-ip.biz (ool-435559b8.dyn.optonline.net [67.85.89.184]) by mta5.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTP005SON8C1WV0@mta5.srv.hcvlny.cv.net> for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 08:38:36 -0500 (EST) Received: from flosoft.no-ip.biz (localhost [IPv6:::1]) by flosoft.no-ip.biz (8.14.2/8.14.2) with ESMTP id lBRDcXQG000923; Thu, 27 Dec 2007 08:38:35 -0500 Date: Thu, 27 Dec 2007 08:38:33 -0500 From: "Aryeh M. Friedman" In-reply-to: <00fe01c84884$93ba1d30$1f2c88c1@corp.fccn.pt> To: =?ISO-8859-1?Q?Nuno_Gon=E7alves?= Message-id: <4773AAD9.806@gmail.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 8BIT X-Enigmail-Version: 0.95.5 References: <00fe01c84884$93ba1d30$1f2c88c1@corp.fccn.pt> User-Agent: Thunderbird 2.0.0.9 (X11/20071217) Cc: freebsd-questions@freebsd.org Subject: Re: Changing boot partition X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 13:38:38 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nuno Gonçalves wrote: > Hi all, > > > > I Have a FreeBSD booting ok. It?s FSTAB is like this: > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > /dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2d /backup ufs rw > > > > When I boot the machine the boot manager shows me F1 and F2 to boot for. > > F1 brings me /dev/ad1s1a OK > > Still I want the machine to boot to /dev/ad1s2d > > This partition has a backup from another FreeBSD which I want to boot. > > > > To accomplish this, I need only to change FSTAB ? > > What changes should I do ? changing /dev/ad1s2d to /dev/ad1s2a ? I read that > a means boot root partition > > > > I tried to change FSTAB to > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > #/dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2a /backup ufs rw > > > > And it hanged when I pressed F1 (could not mount the root partition :P ) > > > > Could you guys give any hint ? > > Sorry about this questions but I am a newbie to FreeBSD I forget the exact semantics but do a search for "installing freebsd in a usb stick" on google the reason for referring to this site is it shows how to duplicate what sysinstall does from the command line - -- Aryeh M. Friedman FloSoft Systems http://www.flosoft-systems.com Developer, not business, friendly -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHc6rZzIOMjAek4JIRAoevAJ0WZzlRNgLiZeMzgS7RV2SS96kEBgCfe9PI tsmEoCTLlXPqg/FWYSEcukc= =oamg -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 14:04:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 460EC16A41A for ; Thu, 27 Dec 2007 14:04:11 +0000 (UTC) (envelope-from jeffrey@goldmark.org) Received: from out4.smtp.messagingengine.com (out4.smtp.messagingengine.com [66.111.4.28]) by mx1.freebsd.org (Postfix) with ESMTP id 1C20913C447 for ; Thu, 27 Dec 2007 14:04:11 +0000 (UTC) (envelope-from jeffrey@goldmark.org) Received: from compute2.internal (compute2.internal [10.202.2.42]) by out1.messagingengine.com (Postfix) with ESMTP id A34B1823A7; Thu, 27 Dec 2007 09:04:10 -0500 (EST) Received: from heartbeat1.messagingengine.com ([10.202.2.160]) by compute2.internal (MEProxy); Thu, 27 Dec 2007 09:04:10 -0500 X-Sasl-enc: +tNgUFcwImb1q//DENMbgek9QQL5vf7NUusKaa2o/+mF 1198764250 Received: from [10.1.10.136] (n114.ewd.goldmark.org [72.64.118.114]) by mail.messagingengine.com (Postfix) with ESMTP id 3872114396; Thu, 27 Dec 2007 09:04:10 -0500 (EST) Message-Id: <98D543FB-8060-4F8F-B4FD-4E5B8ABE876F@goldmark.org> From: Jeffrey Goldberg To: Peter Boosten In-Reply-To: <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v915) Date: Thu, 27 Dec 2007 08:04:07 -0600 References: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> X-Mailer: Apple Mail (2.915) Cc: User questions Subject: Re: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 14:04:11 -0000 On Dec 26, 2007, at 9:40 PM, Peter Boosten wrote: > Quoting Livia Markoczy : >> >> syslog_ng_config="-u daemon" >> >> But nothing has logged anywhere, including to console, since the >> time I >> killed the system syslogd. > file permissions. While your syslog-ng runs as daemon, it has no > permission to log to files owned by root (syslogd). > I solved that by logging into a different subdir owned by daemon. OK thanks. (I am the original poster, but I'd accidentally posted using my wife's role). Is there any reason not to simply do a cd /var/log chown -R daemon . also chown daemon /dev/console for console logging. Will log rotation preserve daemon ownership? Cheers, -j -- Jeffrey Goldberg http://www.goldmark.org/jeff/ From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 15:06:00 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8FBB216A41A for ; Thu, 27 Dec 2007 15:06:00 +0000 (UTC) (envelope-from hugo@barafranca.com) Received: from mail.barafranca.com (mail.barafranca.com [67.19.101.164]) by mx1.freebsd.org (Postfix) with ESMTP id 6F3AF13C468 for ; Thu, 27 Dec 2007 15:06:00 +0000 (UTC) (envelope-from hugo@barafranca.com) Received: from localhost (localhost [127.0.0.1]) by mail.barafranca.com (Postfix) with ESMTP id 7CC41C385C; Thu, 27 Dec 2007 15:13:50 +0000 (UTC) Received: from mail.barafranca.com ([67.19.101.164]) by localhost (mail.barafranca.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 96312-03; Thu, 27 Dec 2007 15:13:10 +0000 (UTC) Received: from [10.0.10.40] (adslfixo-b3-115-114.telepac.pt [213.13.115.114]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.barafranca.com (Postfix) with ESMTP id 9CB3AC3833; Thu, 27 Dec 2007 15:13:09 +0000 (UTC) Message-ID: <4773BF26.6010602@barafranca.com> Date: Thu, 27 Dec 2007 15:05:10 +0000 From: Hugo Silva User-Agent: Thunderbird 2.0.0.9 (X11/20071213) MIME-Version: 1.0 To: jy-p@fixedpointgroup.com, freebsd-questions@freebsd.org References: <4773176E.7060702@fixedpointgroup.com> In-Reply-To: <4773176E.7060702@fixedpointgroup.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: amavisd-new at barafranca.com X-Spam-Status: No, score=0 tagged_above=-1 required=4 tests=[none] X-Spam-Score: 0 X-Spam-Level: Cc: Subject: Re: zfs-geli-zfs: opinions/suggestions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 15:06:00 -0000 Jacob Yocom-Piatt wrote: > lo all, > > have a freebsd 7.0-beta4 machine attached to an external disk > enclosure and would like feedback on the following setup: have RAID-Z > on 4 disks, ZFS volume that takes up entire RAID-Z, use ZVOL from > volume for encryption via geli, use .eli (decrypted) device to make > another ZFS pool. the idea being "no time/resources wasted doing fscks > plus encryption sans hardware RAID". Unless I'm misunderstanding your objective, geli'ing the disks and creating a pool ontop of the encrypted disks (zpool create secure raidz da0.eli da1.eli da2.eli da3.eli) would also work, and would be far easier to maintain. Your data would still be encrypted and you would still need to provide the passphrase to make the pool accessible. Best regards, Hugo > > translated to commands this reads: > > # zpool create p_a raidz /dev/mfid1 /dev/mfid2 /dev/mfid3 /dev/mfid4 > # zpool list > NAME SIZE USED AVAIL CAP HEALTH ALTROOT > p_a 2.72T 4.02G 2.71T 0% ONLINE - > # zfs create -V 2048g p_a/vol > # geli init -K /root/p_a.key -s 4096 -l 256 /dev/zvol/p_a/vol > # geli attach -k /root/p_a.key /dev/zvol/p_a/vol > # zpool create a /dev/zvol/p_a/vol.eli > > i got a reboot while scp-ing some files to /a (only got ~3 GB in) from > another machine with the above setup. am currently waiting far too > long for a rm -R to complete under /a. will test if any of > this behavior is repeatable. > > i welcome opinions or suggestions on the stability of such a setup > (ZFS-geli-ZFS) and if this is not stable, as the reboot i just > experienced would indicate, suggestions on alternative configurations > that allow use of geli and minimize or eliminate fsck time. i do have > a preference for no hardware RAID since it ties us to a particular > card. will furnish a proper bug report if the reboots are repeatable > in the aforementioned scenario. > > NOTE: please CC me since i am not yet subscribed to this list > > cheers, > jake > From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 16:33:24 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8506616A41A for ; Thu, 27 Dec 2007 16:33:24 +0000 (UTC) (envelope-from gpeel@thenetnow.com) Received: from thenetnow.com (thenetnow.com [69.90.69.141]) by mx1.freebsd.org (Postfix) with ESMTP id 645C313C4CC for ; Thu, 27 Dec 2007 16:33:24 +0000 (UTC) (envelope-from gpeel@thenetnow.com) Received: from hpeel.ody.ca ([216.240.12.2] helo=GRANT) by constellation.thenetnow.com with esmtpa (Exim 4.63 (FreeBSD)) (envelope-from ) id 1J7vfe-0003lm-D2 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 11:33:22 -0500 Message-ID: <003901c848a6$32015be0$6501a8c0@GRANT> From: "Grant Peel" To: Date: Thu, 27 Dec 2007 11:33:21 -0500 Organization: The Net Now MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3138 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 Subject: Hosting Server Load X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Grant Peel List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 16:33:24 -0000 Hi all, Just wondering what kind of load most hosters consider reasonable. (1 min, 5 min, and 15 min average loads). -Grant From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 16:40:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3B0FE16A418 for ; Thu, 27 Dec 2007 16:40:54 +0000 (UTC) (envelope-from peter@boosten.org) Received: from smtpq1.groni1.gr.home.nl (smtpq1.groni1.gr.home.nl [213.51.130.200]) by mx1.freebsd.org (Postfix) with ESMTP id F19BD13C469 for ; Thu, 27 Dec 2007 16:40:53 +0000 (UTC) (envelope-from peter@boosten.org) Received: from [213.51.130.188] (port=43624 helo=smtp3.groni1.gr.home.nl) by smtpq1.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7vmu-00008k-3N; Thu, 27 Dec 2007 17:40:52 +0100 Received: from cp268254-a.landg1.lb.home.nl ([84.25.65.88]:5013 helo=ra.egypt.nl) by smtp3.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7vms-0004O2-Kz; Thu, 27 Dec 2007 17:40:51 +0100 Received: by ra.egypt.nl (Postfix, from userid 80) id EDEBC3988E; Thu, 27 Dec 2007 17:40:49 +0100 (CET) Received: from xp.egypt.nl (xp.egypt.nl [192.168.13.35]) by www.boosten.org (Horde MIME library) with HTTP; Thu, 27 Dec 2007 17:40:49 +0100 Message-ID: <20071227174049.ku0vp66isksgkk0c@www.boosten.org> Date: Thu, 27 Dec 2007 17:40:49 +0100 From: Peter Boosten To: Jeffrey Goldberg References: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> <98D543FB-8060-4F8F-B4FD-4E5B8ABE876F@goldmark.org> In-Reply-To: <98D543FB-8060-4F8F-B4FD-4E5B8ABE876F@goldmark.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: 7bit User-Agent: Internet Messaging Program (IMP) H3 (4.1.5) X-Spam-Score: 0.0 (/) Cc: User questions Subject: Re: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 16:40:54 -0000 Quoting Jeffrey Goldberg : > Is there any reason not to simply do a > > cd /var/log > chown -R daemon . I think (but I'm not sure) that permissions will be reversed by mtree. > > also > > chown daemon /dev/console Won't work either. *if* you're going to do that you should alter /etc/devfs.conf > > for console logging. > > Will log rotation preserve daemon ownership? Never used the *traditional* log style with syslog-ng, I stored everything per day/month/year/server. I ended up running syslog-ng as root, which is probably a bad idea as well, so I cannot give you any advice on this one. Peter -- http://www.boosten.org From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 17:00:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C998B16A418 for ; Thu, 27 Dec 2007 17:00:34 +0000 (UTC) (envelope-from stapleton.41@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id A8C6E13C448 for ; Thu, 27 Dec 2007 17:00:34 +0000 (UTC) (envelope-from stapleton.41@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5173793waf.3 for ; Thu, 27 Dec 2007 09:00:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=JZUDtwww5uV7mrftinJyWFmDtqs+hj4kznP/m7lByPo=; b=bH9iJiV2nnxEOBaMBxQgaKTbDXgGiOTQgDfwsxjZkmjySnsI/UhS/YNHEJPS9mt7w5zQZU1TjNxNWnwP2S6FzEn7lAm0q1WBqoYTC5IA54HrH8rn+Fonx6ErFYylpozyuiUzBxXuEqmi88kLiSaoTQvi5ct1F0GIOxWb1qbxvJA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=TuiI3Oq1lf7171T7qcg25/NFE3rpLRVRo5B4nwVz9uFP/bEUeEfEWTwfA50WgYIYN+6mUbnsWbR7sWbJ8JrMk2H0lcjCbv/yrOjrzDCYDbxlLrxI62wcSIaTiNubScFFRiKGP8o6cJKF/OLKnJrXXrPY7pUjvrPJ7mFHxi8kKVw= Received: by 10.115.107.1 with SMTP id j1mr7862170wam.55.1198773392795; Thu, 27 Dec 2007 08:36:32 -0800 (PST) Received: by 10.115.60.13 with HTTP; Thu, 27 Dec 2007 08:36:32 -0800 (PST) Message-ID: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> Date: Thu, 27 Dec 2007 11:36:32 -0500 From: "Jim Stapleton" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: experience with a Logitech Internet 1500 wireless keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 17:00:34 -0000 It's the cheapest wireless I could find with a ins/del/home/end/pg up/pg down block on the keyboard, and I wanted to ask if anyone had experience with one and FreeBSD? I got an MS wireless keyboard/mouse a while ago, but the mouse doesn't work (no one has gotten one to work apparantly), and I really need wireless on this system. Thanks, -Jim Stapleton From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 17:27:05 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F27D316A417 for ; Thu, 27 Dec 2007 17:27:05 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.freebsd.org (Postfix) with ESMTP id 1882D13C478 for ; Thu, 27 Dec 2007 17:27:02 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from kobe.laptop (ppp1-119.pat.forthnet.gr [213.16.208.119]) (authenticated bits=128) by igloo.linux.gr (8.14.1/8.14.1/Debian-9) with ESMTP id lBRHQbSs012518 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Thu, 27 Dec 2007 19:26:46 +0200 Received: from kobe.laptop (kobe.laptop [127.0.0.1]) by kobe.laptop (8.14.2/8.14.2) with ESMTP id lBRHQa6f006294 for ; Thu, 27 Dec 2007 19:26:36 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Received: (from keramida@localhost) by kobe.laptop (8.14.2/8.14.2/Submit) id lBRHPfJl006289; Thu, 27 Dec 2007 19:25:41 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Date: Thu, 27 Dec 2007 19:25:41 +0200 From: Giorgos Keramidas To: Bernt Hansson Message-ID: <20071227172540.GA5858@kobe.laptop> References: <4771E7FD.6030908@bah.homeip.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4771E7FD.6030908@bah.homeip.net> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-4.081, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.32, BAYES_00 -2.60) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: Buildworld RELENG_7 problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 17:27:06 -0000 On 2007-12-26 06:34, Bernt Hansson wrote: > Hello! > > I'v got a bit of a problem upgrading from FreeBSD 7.0-BETA2 #0 > to any later version. > This is the error I get: > > > gtyp-gen.h > echo "NULL};" >> gtyp-gen.h > echo "static const char * const lang_dir_names[] = {" >> gtyp-gen.h > echo "\"c\", " >> gtyp-gen.h > echo "\"cp\", " >> gtyp-gen.h > echo "\"objc\", " >> > gtyp-gen.h > echo "NULL};" >> gtyp-gen.h > cc -O2 -fno-strict-aliasing -pipe -I. -DIN_GCC -DHAVE_CONFIG_H > -DPREFIX=\"/usr\" -I/usr/obj/usr/sr > c/gnu/usr.bin/cc/cc_tools/../cc_tools > -I/usr/src/gnu/usr.bin/cc/cc_tools/../cc_tools -I/usr/src/gn > u/usr.bin/cc/cc_tools/../../../../contrib/gcc > -I/usr/src/gnu/usr.bin/cc/cc_tools/../../../../contr > ib/gcc/config > -I/usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcclibs/include > -I/usr/src/gn > u/usr.bin/cc/cc_tools/../../../../contrib/gcclibs/libcpp/include > -I/usr/src/gnu/usr.bin/cc/cc_tool > s/../../../../contrib/gcclibs/libdecnumber -g -DGENERATOR_FILE > -DHAVE_CONFIG_H -I/usr/obj/usr/src > /tmp/legacy/usr/include -c > /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/gengtype.c > In file included from ./tm.h:4, > from > /usr/src/gnu/usr.bin/cc/cc_tools/../../../../contrib/gcc/gengtype.c:24: > ./options.h:901: error: redeclaration of enumerator 'OPT_w' > ./options.h:899: error: previous definition of 'OPT_w' was here > *** Error code 1 Hi Bernt, Are you using a non-POSIX locale (i.e. LANG, LC_ALL and friends)? From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 17:32:13 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5AA2216A417 for ; Thu, 27 Dec 2007 17:32:13 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.180]) by mx1.freebsd.org (Postfix) with ESMTP id 012E713C467 for ; Thu, 27 Dec 2007 17:32:12 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: by py-out-1112.google.com with SMTP id u77so5619685pyb.3 for ; Thu, 27 Dec 2007 09:32:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:date:from:to:subject:message-id:mail-followup-to:mime-version:content-type:content-disposition:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; bh=Uii2xwaZlcIHrnPABGmXDZ+FQzsQ4EWF4vFq9fsyZfg=; b=GJ/5VLtFfPxISvkVAehHFW+7ea7yR/qoIjoZfxLKKZVeEoNPJ76b77kpGsS7Sg++7t5xDYGtw03sqIkcyzjzhsNWwgsYMr7OVlED1q509QPqlFyrkBN4w+ATlxI46HomptsNp2IavzoiSiGueHGkkYTlTp9s29t7hP8wZK+WLBc= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:subject:message-id:mail-followup-to:mime-version:content-type:content-disposition:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; b=N7wMbK0U0rAo/t7rMJpHl2QE4wgu5Nuq0LFs4IwbxXBE2afSQSofv07z4EaKgghOuU+gh886Xmq33zFDf1FYfmjUh29ybsEfwNNZXISILj9UsY5jRGDN3R+aKUHZ4cvRJzG/PYfG70eiI5BH7Yqu3eglKFPHNFnfNbvpu8vT96k= Received: by 10.140.207.16 with SMTP id e16mr4146005rvg.297.1198775244165; Thu, 27 Dec 2007 09:07:24 -0800 (PST) Received: from chateau.d.lf ( [122.163.50.18]) by mx.google.com with ESMTPS id b34sm6412526rvf.22.2007.12.27.09.07.21 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Dec 2007 09:07:23 -0800 (PST) Date: Thu, 27 Dec 2007 22:36:54 +0530 From: =?utf-8?B?4KSG4KS24KWA4KS3IOCktuClgeCkleCljeCksg==?= Ashish Shukla To: freebsd-questions@freebsd.org Message-ID: <20071227170654.GA7265@chateau.d.lf> Mail-Followup-To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="17pEHd4RhPHOinZp" Content-Disposition: inline X-Face: "\:nMpJ)EA!j>2nEu-[(+&o:N+CtL^AS\, Jv*LO5qBr#W2.\=d Subject: Any way to access I2C sensors in FreeBSD ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 17:32:13 -0000 --17pEHd4RhPHOinZp Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, Is there anything similar to lm_sensors (for Linux) in FreeBSD, to monitor temperature of motherboard, CPU, etc. ?=20 I'm using Intel D945GNTL mobo with Intel Pentium 4 630 (EM64T/HT) CPU. Following is an output of 'sensors' for my box, when running on Linux: ----8<----8<---- abbe [~] chateau $ sensors lm85-i2c-0-2e Adapter: SMBus I801 adapter at 2000 V1.5: +1.55 V (min =3D +0.00 V, max =3D +3.32 V) =20 VCore: +1.35 V (min =3D +0.00 V, max =3D +2.99 V) =20 V3.3: +3.28 V (min =3D +0.00 V, max =3D +4.38 V) =20 V5: +5.03 V (min =3D +0.00 V, max =3D +6.64 V) =20 V12: +12.19 V (min =3D +0.00 V, max =3D +15.94 V) =20 CPU_Fan: 1069 RPM (min =3D 0 RPM) =20 fan2: 0 RPM (min =3D 0 RPM) =20 fan3: 778 RPM (min =3D 0 RPM) =20 fan4: 0 RPM (min =3D 0 RPM) =20 CPU Temp: +59=C2=B0C (low =3D -127=C2=B0C, high =3D +127=C2=B0C) = =20 Board Temp: +47=C2=B0C (low =3D -127=C2=B0C, high =3D +127=C2=B0C) = =20 Remote Temp: +42=C2=B0C (low =3D -127=C2=B0C, high =3D +127=C2=B0C) = =20 CPU_PWM: 112 Fan2_PWM: 103 Fan3_PWM: 103 vid: +1.088 V (VRM Version 10.0) ---->8---->8---- Is there anyway to access this information from FreeBSD also, hmm... ? TIA --=20 Ashish Shukla =E0=A4=86=E0=A4=B6=E0=A5=80=E0=A4=B7 =E0=A4=B6=E0=A5=81=E0=A4= =95=E0=A5=8D=E0=A4=B2 http://wahjava.wordpress.com/ =C2=B7-- =C2=B7- =C2=B7=C2=B7=C2=B7=C2=B7 =C2=B7--- =C2=B7- =C2=B7=C2=B7=C2= =B7- =C2=B7- =C2=B7--=C2=B7-=C2=B7 --=C2=B7 -- =C2=B7- =C2=B7=C2=B7 =C2=B7-= =C2=B7=C2=B7 =C2=B7-=C2=B7-=C2=B7- -=C2=B7-=C2=B7 --- -- --17pEHd4RhPHOinZp Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHc9uuHy+EEHYuXnQRAjVSAJ9pf1miHa3cNHYPYCqDIxuu8ys7nQCfTBmf Sd5yi9Mlswr1A4mNSf0e+Mc= =bE0a -----END PGP SIGNATURE----- --17pEHd4RhPHOinZp-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 17:50:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CD6FC16A417 for ; Thu, 27 Dec 2007 17:50:09 +0000 (UTC) (envelope-from liettneff@bk.ru) Received: from cny.innet.yaroslavl.su (cny.innet.yaroslavl.su [217.15.134.68]) by mx1.freebsd.org (Postfix) with ESMTP id 21CFE13C457 for ; Thu, 27 Dec 2007 17:50:08 +0000 (UTC) (envelope-from liettneff@bk.ru) Received: from tac.innet.yaroslavl.su (tac.innet.yaroslavl.su [217.15.135.68]) by cny.innet.yaroslavl.su (8.11.6/8.11.6) with ESMTP id lBRHo4a60914; Thu, 27 Dec 2007 20:50:04 +0300 (MSK) Received: from reaper.yaroslavl.ru (reaper.yaroslavl.ru [85.113.202.195]) by tac.innet.yaroslavl.su (8.13.7/8.13.7) with ESMTP id lBRHo37x068255; Thu, 27 Dec 2007 20:50:03 +0300 (MSK) Received: from comp-reaper (comp-reaper [10.19.1.3]) by reaper.yaroslavl.ru (Postfix) with ESMTP id C99612284F; Thu, 27 Dec 2007 20:49:58 +0300 (MSK) Date: Thu, 27 Dec 2007 20:50:06 +0300 From: Michael Lednev X-Mailer: The Bat! (v3.99.29) Professional Organization: none X-Priority: 3 (Normal) Message-ID: <1581622098.20071227205006@bk.ru> To: "Jim Stapleton" In-Reply-To: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> References: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: experience with a Logitech Internet 1500 wireless keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Michael Lednev List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 17:50:09 -0000 Hello, Jim. On 27 ??????? 2007 ?., 19:36:32 you wrote: JS> It's the cheapest wireless I could find with a ins/del/home/end/pg JS> up/pg down block on the keyboard, and I wanted to ask if anyone had JS> experience with one and FreeBSD? I got an MS wireless keyboard/mouse a JS> while ago, but the mouse doesn't work (no one has gotten one to work JS> apparantly), and I really need wireless on this system. I'm using Logitech Cordless Rechargeable Desktop for about 2 years with no problems. Probably this one will work too. -- Best regards, Michael mailto:liettneff@bk.ru From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:18:22 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6512116A419 for ; Thu, 27 Dec 2007 18:18:22 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp02.lnh.mail.rcn.net (smtp02.lnh.mail.rcn.net [207.172.157.102]) by mx1.freebsd.org (Postfix) with ESMTP id 1BB9213C461 for ; Thu, 27 Dec 2007 18:18:21 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from mr08.lnh.mail.rcn.net ([207.172.157.28]) by smtp02.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 13:18:20 -0500 Received: from smtp01.lnh.mail.rcn.net (smtp01.lnh.mail.rcn.net [207.172.4.11]) by mr08.lnh.mail.rcn.net (MOS 3.8.6-GA) with ESMTP id JMK99469; Thu, 27 Dec 2007 13:18:20 -0500 (EST) Received: from 209-6-22-188.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.22.188]) by smtp01.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 13:17:17 -0500 From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <18291.60523.175555.968377@jerusalem.litteratus.org> Date: Thu, 27 Dec 2007 13:18:19 -0500 To: freebsd-questions@freebsd.org In-Reply-To: <1581622098.20071227205006@bk.ru> References: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> <1581622098.20071227205006@bk.ru> X-Mailer: VM 7.17 under 21.5 (beta28) "fuki" XEmacs Lucid X-Junkmail-Whitelist: YES (by domain whitelist at mr08.lnh.mail.rcn.net) Subject: Logitech keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:18:22 -0000 As long as we're in the viciity: I have a Logitech i-Touch keyboard; standard 104 (or whatever it is these days) setup plus a dozen extra buttons and two dials. Great product. It would be even greater if a) I could get X to register/comunicate all the extra stuff and b) programs understood and used those inputs. Has anyone seen this done? I'd dearly loce to be able to use the little dial by the TAB key for volume control in xmms. Robert Huff From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:18:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6B2DC16A501 for ; Thu, 27 Dec 2007 18:18:28 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from smtp.utwente.nl (unknown [IPv6:2001:610:1908:1000:204:23ff:feb5:7e66]) by mx1.freebsd.org (Postfix) with ESMTP id A86AF13C447 for ; Thu, 27 Dec 2007 18:18:27 +0000 (UTC) (envelope-from pieter@degoeje.nl) Received: from lux.student.utwente.nl (lux.student.utwente.nl [130.89.170.81]) by smtp.utwente.nl (8.12.10/SuSE Linux 0.7) with ESMTP id lBRIIKfr001221; Thu, 27 Dec 2007 19:18:20 +0100 From: Pieter de Goeje To: freebsd-questions@freebsd.org Date: Thu, 27 Dec 2007 19:18:19 +0100 User-Agent: KMail/1.9.7 References: <20071227170654.GA7265@chateau.d.lf> In-Reply-To: <20071227170654.GA7265@chateau.d.lf> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200712271918.19709.pieter@degoeje.nl> X-UTwente-MailScanner-Information: Scanned by MailScanner. Contact helpdesk@ITBE.utwente.nl for more information. X-UTwente-MailScanner: Found to be clean X-UTwente-MailScanner-From: pieter@degoeje.nl X-Spam-Status: No Cc: Subject: Re: Any way to access I2C sensors in FreeBSD ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:18:28 -0000 On Thursday 27 December 2007, =E0=A4=86=E0=A4=B6=E0=A5=80=E0=A4=B7 =E0=A4= =B6=E0=A5=81=E0=A4=95=E0=A5=8D=E0=A4=B2 Ashish Shukla wrote: > Hi, > > Is there anything similar to lm_sensors (for Linux) in FreeBSD, to > monitor temperature of motherboard, CPU, etc. ? [snip] > > Is there anyway to access this information from FreeBSD also, hmm... ? > > TIA Have a look at the sysutils/mbmon and sysutils/healthd ports. Pieter de Goeje From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:20:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3C72416A417 for ; Thu, 27 Dec 2007 18:20:04 +0000 (UTC) (envelope-from jeffrey@goldmark.org) Received: from out4.smtp.messagingengine.com (out4.smtp.messagingengine.com [66.111.4.28]) by mx1.freebsd.org (Postfix) with ESMTP id 1B3BC13C468 for ; Thu, 27 Dec 2007 18:20:03 +0000 (UTC) (envelope-from jeffrey@goldmark.org) Received: from compute1.internal (compute1.internal [10.202.2.41]) by out1.messagingengine.com (Postfix) with ESMTP id 87ED182638; Thu, 27 Dec 2007 13:20:03 -0500 (EST) Received: from heartbeat1.messagingengine.com ([10.202.2.160]) by compute1.internal (MEProxy); Thu, 27 Dec 2007 13:20:03 -0500 X-Sasl-enc: 9WbkmiLMlh5T27N8sXjcgix/UrtGBvWzbk/Edivofzon 1198779602 Received: from hagrid.ewd.goldmark.org (n114.ewd.goldmark.org [72.64.118.114]) by mail.messagingengine.com (Postfix) with ESMTP id 5C4B6A6DA; Thu, 27 Dec 2007 13:20:02 -0500 (EST) Message-Id: <9F820227-4DB1-474E-B50C-1CE2536CC1FD@goldmark.org> From: Jeffrey Goldberg To: Peter Boosten In-Reply-To: <20071227174049.ku0vp66isksgkk0c@www.boosten.org> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v915) Date: Thu, 27 Dec 2007 12:20:01 -0600 References: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> <98D543FB-8060-4F8F-B4FD-4E5B8ABE876F@goldmark.org> <20071227174049.ku0vp66isksgkk0c@www.boosten.org> X-Mailer: Apple Mail (2.915) Cc: User questions Subject: Re: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:20:04 -0000 On Dec 27, 2007, at 10:40 AM, Peter Boosten wrote: > Quoting Jeffrey Goldberg : > >> Is there any reason not to simply do a >> >> cd /var/log >> chown -R daemon . > > I think (but I'm not sure) that permissions will be reversed by mtree. This is the first I've heard of mtree. I just looked mtree(8), but I take it that mtree is run periodically somehow to "fix" things. Do you know where? I can always keep my logs in some place other than /var/log if this is an issue. >> also >> >> chown daemon /dev/console > > Won't work either. *if* you're going to do that you should alter / > etc/devfs.conf More things to learn. I'm not really concerned about logging to console anyway, as the machine will run headless most of the time. >> Will log rotation preserve daemon ownership? > > Never used the *traditional* log style with syslog-ng, I stored > everything per day/month/year/server. I'm doing that for hosts that this is the remote syslod server for. I'm using /var/log/HOSTS/$HOST/$YEAR/$MONTH/$DAY/$FACILITY-$YEAR$MONTH$DAY" for everything coming from the udp source. I suppose I could just add "localhost" under HOSTS to do a similar destination for everything else, though there I would probably have FACILITY be the major categorization > I ended up running syslog-ng as root, which is probably a bad idea > as well, so I cannot give you any advice on this one. It sounds like using something other than /var/log for a destination makes the most sense. I won't promise anything, but if I get to grok this all better, I'll submit a pr for syslog-ng which includes a pkg-message and a FreeBSD README. (I had to look in the startup script for instructions on how to enable syslog-ng). Cheers, -j From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:21:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4E81716A4CA for ; Thu, 27 Dec 2007 18:21:27 +0000 (UTC) (envelope-from jy-p@fixedpointgroup.com) Received: from mail.smartchem.us (mail.smartchem.us [70.227.131.10]) by mx1.freebsd.org (Postfix) with ESMTP id 1F3E813C468 for ; Thu, 27 Dec 2007 18:21:27 +0000 (UTC) (envelope-from jy-p@fixedpointgroup.com) Received: from rp.0-simplex.net (unknown [10.9.0.6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.smartchem.us (Postfix) with ESMTP id ADFB743243 for ; Thu, 27 Dec 2007 12:21:53 -0600 (CST) Message-ID: <4773ED53.3040502@fixedpointgroup.com> Date: Thu, 27 Dec 2007 12:22:11 -0600 From: Jacob Yocom-Piatt User-Agent: Thunderbird 2.0.0.6 (X11/20070818) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <4773176E.7060702@fixedpointgroup.com> <4773BF26.6010602@barafranca.com> In-Reply-To: <4773BF26.6010602@barafranca.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: zfs-geli-zfs: opinions/suggestions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:21:27 -0000 Hugo Silva wrote: > Jacob Yocom-Piatt wrote: >> lo all, >> >> have a freebsd 7.0-beta4 machine attached to an external disk >> enclosure and would like feedback on the following setup: have RAID-Z >> on 4 disks, ZFS volume that takes up entire RAID-Z, use ZVOL from >> volume for encryption via geli, use .eli (decrypted) device to make >> another ZFS pool. the idea being "no time/resources wasted doing >> fscks plus encryption sans hardware RAID". > > Unless I'm misunderstanding your objective, geli'ing the disks and > creating a pool ontop of the encrypted disks (zpool create secure > raidz da0.eli da1.eli da2.eli da3.eli) would also work, and would be > far easier to maintain. Your data would still be encrypted and you > would still need to provide the passphrase to make the pool accessible. > this is a fine idea and removes a ZFS layer but i expect it will require a short sh script (read input and pipe into loop over disks) unless i want to enter a passphrase per disk. if anybody's already got such a script, would be nice to have since my script skills are kinda weak. will geli each of the disks and test it out to see if it is more stable than the original config. thanks for your input, hugo! cheers, jake > Best regards, > > Hugo >> >> translated to commands this reads: >> >> # zpool create p_a raidz /dev/mfid1 /dev/mfid2 /dev/mfid3 /dev/mfid4 >> # zpool list >> NAME SIZE USED AVAIL CAP HEALTH ALTROOT >> p_a 2.72T 4.02G 2.71T 0% ONLINE - >> # zfs create -V 2048g p_a/vol >> # geli init -K /root/p_a.key -s 4096 -l 256 /dev/zvol/p_a/vol >> # geli attach -k /root/p_a.key /dev/zvol/p_a/vol >> # zpool create a /dev/zvol/p_a/vol.eli >> >> i got a reboot while scp-ing some files to /a (only got ~3 GB in) >> from another machine with the above setup. am currently waiting far >> too long for a rm -R to complete under /a. will test if >> any of this behavior is repeatable. >> >> i welcome opinions or suggestions on the stability of such a setup >> (ZFS-geli-ZFS) and if this is not stable, as the reboot i just >> experienced would indicate, suggestions on alternative configurations >> that allow use of geli and minimize or eliminate fsck time. i do have >> a preference for no hardware RAID since it ties us to a particular >> card. will furnish a proper bug report if the reboots are repeatable >> in the aforementioned scenario. >> >> NOTE: please CC me since i am not yet subscribed to this list >> >> cheers, >> jake >> > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:23:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 70C4416A479 for ; Thu, 27 Dec 2007 18:23:11 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.185]) by mx1.freebsd.org (Postfix) with ESMTP id 26AD113C465 for ; Thu, 27 Dec 2007 18:23:11 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so3508354rvb.43 for ; Thu, 27 Dec 2007 10:23:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; bh=TLCGwXuanKZDNeFASllvrWXkp/P4QFDmR25i2GTduug=; b=AYEIyHPa+KCqkK9ooK8d5DlrRTjQRw3BalwYWEfWb3XPPJ7Sh7aAFvVbZoPM+IY0c2D0NMJ/KfAOM4d5j5JFduE3y49jL44T9mViF5ewy92cOtJk6P/mBOolwEOfn1hF/SwlDKOsquLxj+2BFs++BBAu60yaf13f7Uc/A/kXc1o= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; b=usmgHverOhxlDsD9qG9xTJrVz8RTnhxnwHxPNroLCm7MK/WLLTx3R8JWrYvE6sEw8IhWICPsUpO8xjhl/qBb2/k4AaO0uQknH2SAErVDRhFNVLzSAWWmpD2YFy7iIPC0rToTrr23t5Q92j3tHcuhpz1XfSbEOKfRKe0heMIHr58= Received: by 10.140.148.3 with SMTP id v3mr4212834rvd.129.1198779790814; Thu, 27 Dec 2007 10:23:10 -0800 (PST) Received: from chateau.d.lf ( [122.163.50.18]) by mx.google.com with ESMTPS id l21sm8328457rvb.26.2007.12.27.10.23.08 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Dec 2007 10:23:10 -0800 (PST) Date: Thu, 27 Dec 2007 23:52:41 +0530 From: =?utf-8?B?4KSG4KS24KWA4KS3IOCktuClgeCkleCljeCksg==?= Ashish Shukla To: freebsd-questions@freebsd.org Message-ID: <20071227182241.GA7808@chateau.d.lf> Mail-Followup-To: freebsd-questions@freebsd.org References: <20071227170654.GA7265@chateau.d.lf> <200712271918.19709.pieter@degoeje.nl> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="k1lZvvs/B4yU6o8G" Content-Disposition: inline In-Reply-To: <200712271918.19709.pieter@degoeje.nl> X-Face: "\:nMpJ)EA!j>2nEu-[(+&o:N+CtL^AS\, Jv*LO5qBr#W2.\=d Subject: Re: Any way to access I2C sensors in FreeBSD ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:23:11 -0000 --k1lZvvs/B4yU6o8G Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable ,--[ On Thu, Dec 27, 2007 at 07:18:19PM +0100, Pieter de Goeje wrote: [...] | > Is there anyway to access this information from FreeBSD also, hmm... ? | > | > TIA |=20 | Have a look at the sysutils/mbmon and sysutils/healthd ports. Thanks will look at them. --=20 Ashish Shukla =E0=A4=86=E0=A4=B6=E0=A5=80=E0=A4=B7 =E0=A4=B6=E0=A5=81=E0=A4= =95=E0=A5=8D=E0=A4=B2 http://wahjava.wordpress.com/ =C2=B7-- =C2=B7- =C2=B7=C2=B7=C2=B7=C2=B7 =C2=B7--- =C2=B7- =C2=B7=C2=B7=C2= =B7- =C2=B7- =C2=B7--=C2=B7-=C2=B7 --=C2=B7 -- =C2=B7- =C2=B7=C2=B7 =C2=B7-= =C2=B7=C2=B7 =C2=B7-=C2=B7-=C2=B7- -=C2=B7-=C2=B7 --- -- --k1lZvvs/B4yU6o8G Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHc+1xHy+EEHYuXnQRAl7GAJ9VyyhVDxR2ckgGfCk8PZa3jMKoYACg3WxV LpLvS5LqmSiFI94gSolp6uc= =kzj6 -----END PGP SIGNATURE----- --k1lZvvs/B4yU6o8G-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 18:34:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0A46616A419 for ; Thu, 27 Dec 2007 18:34:03 +0000 (UTC) (envelope-from peter@boosten.org) Received: from smtpq2.groni1.gr.home.nl (smtpq2.groni1.gr.home.nl [213.51.130.201]) by mx1.freebsd.org (Postfix) with ESMTP id C51E813C43E for ; Thu, 27 Dec 2007 18:34:02 +0000 (UTC) (envelope-from peter@boosten.org) Received: from [213.51.130.188] (port=50569 helo=smtp3.groni1.gr.home.nl) by smtpq2.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7xYP-0004TQ-K6; Thu, 27 Dec 2007 19:34:01 +0100 Received: from cp268254-a.landg1.lb.home.nl ([84.25.65.88]:5047 helo=ra.egypt.nl) by smtp3.groni1.gr.home.nl with esmtp (Exim 4.60) (envelope-from ) id 1J7xYN-0001rV-IU; Thu, 27 Dec 2007 19:34:01 +0100 Received: from [192.168.13.53] (VAL00653.egypt.nl [192.168.13.53]) by ra.egypt.nl (Postfix) with ESMTP id 06BAC39877; Thu, 27 Dec 2007 19:33:58 +0100 (CET) Message-ID: <4773F016.3010409@boosten.org> Date: Thu, 27 Dec 2007 19:33:58 +0100 From: Peter Boosten User-Agent: Thunderbird 2.0.0.6 (Windows/20070728) MIME-Version: 1.0 To: Jeffrey Goldberg References: <1FF40B1F-D183-421A-A7A6-1BFD8E5EBE15@utdallas.edu> <20071227044016.bqrtqsjpwogkgc8k@www.boosten.org> <98D543FB-8060-4F8F-B4FD-4E5B8ABE876F@goldmark.org> <20071227174049.ku0vp66isksgkk0c@www.boosten.org> <9F820227-4DB1-474E-B50C-1CE2536CC1FD@goldmark.org> In-Reply-To: <9F820227-4DB1-474E-B50C-1CE2536CC1FD@goldmark.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Score: 0.0 (/) Cc: User questions Subject: Re: syslog-ng not logging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 18:34:03 -0000 Jeffrey Goldberg wrote: > This is the first I've heard of mtree. I just looked mtree(8), but I > take it that mtree is run periodically somehow to "fix" things. Do > you know where? > > I can always keep my logs in some place other than /var/log if this is > an issue. > IIRC it's done at boot time. Have a look at /etc/rc.d/var >>> Will log rotation preserve daemon ownership? >> >> Never used the *traditional* log style with syslog-ng, I stored >> everything per day/month/year/server. > > I'm doing that for hosts that this is the remote syslod server for. > I'm using > > /var/log/HOSTS/$HOST/$YEAR/$MONTH/$DAY/$FACILITY-$YEAR$MONTH$DAY" > > for everything coming from the udp source. I suppose I could just add > "localhost" under HOSTS to do a similar destination for everything > else, though there I would probably have FACILITY be the major > categorization > "localhost" will be created automatically by syslog-ng (although it'll probably use the hosts fqdn). >> I ended up running syslog-ng as root, which is probably a bad idea as >> well, so I cannot give you any advice on this one. > > It sounds like using something other than /var/log for a destination > makes the most sense. No, it's enough to grant daemon write permissions in /var/log/HOSTS. Since you're using the $DAY macro, you won't need log rotation anyway. Regards, Peter -- http://www.boosten.org From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:02:01 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D225016A420 for ; Thu, 27 Dec 2007 19:02:01 +0000 (UTC) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.freebsd.org (Postfix) with ESMTP id 7505713C468 for ; Thu, 27 Dec 2007 19:02:01 +0000 (UTC) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (localhost [127.0.0.1]) by tao.thought.org (8.13.8/8.13.1) with ESMTP id lBRJ20AG003475 for ; Thu, 27 Dec 2007 11:02:00 -0800 (PST) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.13.8/8.13.1/Submit) id lBRJ20FN003473 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 11:02:00 -0800 (PST) (envelope-from kline) From: Gary Kline Message-Id: <200712271902.lBRJ20FN003473@tao.thought.org> To: freebsd-questions@freebsd.org Date: Thu, 27 Dec 2007 11:02:00 -0800 (PST) Organization: <> thought.org: pvblic service Unix since 1986... <> Of_Interest: Observing 16 years of service to the Unix community X-Mailer: ELM [version 2.5 PL8] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:02:01 -0000 I've been trtryinng to rebuild everything on tao to get my i810 graphics working. Somehow, mutt bbroke. It seems to break with something undefined in perl5.8. Anybody know what this is: Undefined symbol "__sbmaskrune" ? tia, gary PS: I get the same thing from building other versions of mutt, too. -- Gary Kline kline@thought.org www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:14:32 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9ACC416A417 for ; Thu, 27 Dec 2007 19:14:32 +0000 (UTC) (envelope-from freebsd-questions@slightlystrange.org) Received: from catflap.slightlystrange.org (cpc5-cmbg1-0-0-cust497.cmbg.cable.ntl.com [86.6.1.242]) by mx1.freebsd.org (Postfix) with ESMTP id 2F5BD13C442 for ; Thu, 27 Dec 2007 19:14:32 +0000 (UTC) (envelope-from freebsd-questions@slightlystrange.org) Received: by catflap.slightlystrange.org (Postfix, from userid 106) id 6E7E4617F; Thu, 27 Dec 2007 19:14:30 +0000 (GMT) Received: from torus.slightlystrange.org (torus.slightlystrange.org [10.1.3.50]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by catflap.slightlystrange.org (Postfix) with ESMTP id C6C3560E8 for ; Thu, 27 Dec 2007 19:14:29 +0000 (GMT) Received: (from danielby@localhost) by torus.slightlystrange.org (8.14.2/8.13.4/Submit) id lBRJESF0023754 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 19:14:28 GMT (envelope-from freebsd-questions@slightlystrange.org) Date: Thu, 27 Dec 2007 19:14:27 +0000 From: Daniel Bye To: freebsd-questions@freebsd.org Message-ID: <20071227191427.GA1076@torus.slightlystrange.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> <1581622098.20071227205006@bk.ru> <18291.60523.175555.968377@jerusalem.litteratus.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="AqsLC8rIMeq19msA" Content-Disposition: inline In-Reply-To: <18291.60523.175555.968377@jerusalem.litteratus.org> User-Agent: Mutt/1.4.2.3i X-PGP-Fingerprint: D349 B109 0EB8 2554 4D75 B79A 8B17 F97C 1622 166A Subject: Re: Logitech keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Daniel Bye List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:14:32 -0000 --AqsLC8rIMeq19msA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Dec 27, 2007 at 01:18:19PM -0500, Robert Huff wrote: >=20 > As long as we're in the viciity: > I have a Logitech i-Touch keyboard; standard 104 (or whatever > it is these days) setup plus a dozen extra buttons and two dials. > Great product. > It would be even greater if > a) I could get X to register/comunicate all the extra stuff > and > b) programs understood and used those inputs. > Has anyone seen this done? I'd dearly loce to be able to use > the little dial by the TAB key for volume control in xmms. I tinkered with this stuff a while ago. Let me see if I can remember how (an object lesson in making copious notes whenever you try something new, I guess...) To find out what keycodes your extra keys are bound to, run xev(1) from an Xterm or similar. With your mouse pointer over the little window that pops up, hit each extra key you are interested in and make a note of its keycode value. Quit xev(1) and edit or create ~/.Xmodmap, which allows you to assign keysyms to particular keycodes, etc (see xmodmap(1) for the full story). On my keyboard, turning the dial clockwise generates keycode 176, and anti-clockwise 174 which I map to the XF86AudioRaiseVolume and XF86AudioLowerVolume keysyms: keycode 176 =3D XF86AudioRaiseVolume keycode 174 =3D XF86AudioLowerVolume I also have a mute button next to the dial which generates 140: keycode 140 =3D XF86AudioMute (A full list of keysyms can be found in /usr/local/lib/X11/XKeysymDB) For this to be useful, you need to figure out how your window manager=20 handles keyboard customisation.[1] Under XFCE4, the Keyboard settings applet allows creation of keyboard shortcuts by attaching commands to keysyms. For example, to change the mixer volume, I have=20 `aumix -v +10' assigned to XF86AudioRaiseVolume and `aumix -v -10' assigned to XF86AudioLowerVolume. (aumix is available in the ports). I have assigned a custom shell script to the mute button (XF86AudioMute) which toggles the volume on or off: #!/bin/sh -x # If we are currently playing, mute the speakers and register current # volume level in /tmp/mute-${XINE_PID} # # If mute (ie, if mute-${XINE_PID} exists), restore volume to the level # recorded in the file, and remove the file. XINE_PID=3D$(pgrep xine) if [ -f "/tmp/mute-${XINE_PID}" ] then VOL=3D$(cat "/tmp/mute-${XINE_PID}") aumix -v${VOL} rm "/tmp/mute-${XINE_PID}" else VOL=3D$(aumix -q | awk '/^vol/ {print $2}' | sed -e 's/,//') echo ${VOL} > "/tmp/mute-${XINE_PID}" aumix -v0 fi It's a little naive, but it works for me (TM). I'm sure much more sophist- icated and robust solutions are to be found! I have also created a very simplistic play/pause/resume script which is bound to XF86AudioPlay (keycode 162 in my case): #!/bin/sh # Play/Pause/Unpause control for Xine. # Invoked from the XFCE4 keyboard shortcuts. XINE_PID=3D$(pgrep xine) if [ -f "/tmp/play_pause-${XINE_PID}" ] then rm "/tmp/play_pause-${XINE_PID}" && exec xine -S play else touch "/tmp/play_pause-${XINE_PID}" && exec xine -S pause fi Again, pretty naive, but it works here.=20 Once you have customised your .Xmodmap, you can ativate the changes by adding to your ~/.xsession or ~/.xinitrc xmodmap /path/to/your/home/.Xmodmap Obviously, the same command can be used to load your modifications without logging off. HTH Dan [1] http://gentoo-wiki.com/HOWTO_Use_Multimedia_Keys gives details for various window managers. --=20 Daniel Bye _ ASCII ribbon campaign ( ) - against HTML, vCards and X - proprietary attachments in e-mail / \ --AqsLC8rIMeq19msA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHc/mTixf5fBYiFmoRAig/AKDKW6KwKhRHaesvJAMwl4K9dixWXwCeNvXm ay5tAVsX90XWdXNS5DVqL/8= =zj2/ -----END PGP SIGNATURE----- --AqsLC8rIMeq19msA-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:20:23 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8809816A420 for ; Thu, 27 Dec 2007 19:20:23 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: from hs-out-2122.google.com (hs-out-0708.google.com [64.233.178.251]) by mx1.freebsd.org (Postfix) with ESMTP id 4C4E313C478 for ; Thu, 27 Dec 2007 19:20:23 +0000 (UTC) (envelope-from lumiwa@gmail.com) Received: by hs-out-2122.google.com with SMTP id j58so2517408hsj.11 for ; Thu, 27 Dec 2007 11:20:22 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=6fr5b2sQHuDbmCMyx/sulH/1jKbob8h+IVlf9QBu3ks=; b=WxHPQc4k1DJPk0hSExXi3zTs0lgBG1O/0yqIzJf33iXf0T2LYZc1hgyujtrxWAnesvU5MDZ8ADC1qFDizg1XM/NJRfW6Wd/podRNlUrxJy/+aMty1je/G9oCw/s+R9fZ+tTai4d/BO+/D/vUGKZjN5aogqdLjeK49wTy4lvPwMw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=MInMydt7pp7Guu7XP++63nVr3FJK7xkBiWAhaFsw5Q+3b61HDu4u+YJD7PJ/lX+D2iqPJLZ2h0N/nx8uNEU6uQnrfMnzYCARSLVEfIXddcB2zc4idOMzUcSpejwsZlT8gdqgPZqqkEhb//oEyK5AEQJIiAQ5bpNPT4F+LI9ZoJI= Received: by 10.150.189.9 with SMTP id m9mr2286006ybf.142.1198783222595; Thu, 27 Dec 2007 11:20:22 -0800 (PST) Received: from ?192.168.0.100? ( [65.30.212.174]) by mx.google.com with ESMTPS id 39sm347680nzk.22.2007.12.27.11.20.21 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Dec 2007 11:20:21 -0800 (PST) From: aJTiM To: freebsd-questions@freebsd.org Date: Thu, 27 Dec 2007 13:20:09 -0600 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712271320.09481.lumiwa@gmail.com> Subject: sysctl... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:20:23 -0000 Hi! I am running FreeBSD 7 beta4. When I start a computer and os loading I got one message which I don't know why and how could I save a "problem" if it is a problem. Beta 4 works very good and I don't have problems. hw.acpi.cpu.cx_lowest: C1 sysctl: hw.acpi.cpu.cx_lowest: Invalid argument Thanks in advance. -- It just doesn't seem right to go over the river and through the woods to Grandmother's condo. From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:26:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 54A7416A419 for ; Thu, 27 Dec 2007 19:26:03 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp02.lnh.mail.rcn.net (smtp02.lnh.mail.rcn.net [207.172.157.102]) by mx1.freebsd.org (Postfix) with ESMTP id 1907A13C4EE for ; Thu, 27 Dec 2007 19:26:02 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from mr08.lnh.mail.rcn.net ([207.172.157.28]) by smtp02.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 14:26:02 -0500 Received: from smtp01.lnh.mail.rcn.net (smtp01.lnh.mail.rcn.net [207.172.4.11]) by mr08.lnh.mail.rcn.net (MOS 3.8.6-GA) with ESMTP id JML13419; Thu, 27 Dec 2007 14:26:02 -0500 (EST) Received: from 209-6-22-188.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.22.188]) by smtp01.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 14:24:55 -0500 From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <18291.64581.559365.465563@jerusalem.litteratus.org> Date: Thu, 27 Dec 2007 14:25:57 -0500 To: aJTiM In-Reply-To: <200712271320.09481.lumiwa@gmail.com> References: <200712271320.09481.lumiwa@gmail.com> X-Mailer: VM 7.17 under 21.5 (beta28) "fuki" XEmacs Lucid X-Junkmail-Whitelist: YES (by domain whitelist at mr08.lnh.mail.rcn.net) Cc: freebsd-questions@freebsd.org Subject: sysctl... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:26:03 -0000 aJTiM writes: > I am running FreeBSD 7 beta4. When I start a computer and os > loading I got one message which I don't know why and how could I > save a "problem" if it is a problem. Beta 4 works very good and I > don't have problems. > > hw.acpi.cpu.cx_lowest: C1 > sysctl: hw.acpi.cpu.cx_lowest: Invalid argument Same here. Robert Huff From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:30:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 77B5F16A46C for ; Thu, 27 Dec 2007 19:30:34 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp02.lnh.mail.rcn.net (smtp02.lnh.mail.rcn.net [207.172.157.102]) by mx1.freebsd.org (Postfix) with ESMTP id 3804913C4D5 for ; Thu, 27 Dec 2007 19:30:34 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from mr02.lnh.mail.rcn.net ([207.172.157.22]) by smtp02.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 14:30:33 -0500 Received: from smtp01.lnh.mail.rcn.net (smtp01.lnh.mail.rcn.net [207.172.4.11]) by mr02.lnh.mail.rcn.net (MOS 3.8.6-GA) with ESMTP id OFF39452; Thu, 27 Dec 2007 14:30:33 -0500 (EST) Received: from 209-6-22-188.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.22.188]) by smtp01.lnh.mail.rcn.net with ESMTP; 27 Dec 2007 14:29:30 -0500 From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <18291.64856.135160.767803@jerusalem.litteratus.org> Date: Thu, 27 Dec 2007 14:30:32 -0500 To: Daniel Bye X-Mailer: VM 7.17 under 21.5 (beta28) "fuki" XEmacs Lucid X-Junkmail-Whitelist: YES (by domain whitelist at mr02.lnh.mail.rcn.net) Cc: freebsd-questions@freebsd.org Subject: Re: Logitech keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:30:34 -0000 Daniel Bye writes: > > I have a Logitech i-Touch keyboard; standard 104 (or whatever > > it is these days) setup plus a dozen extra buttons and two dials. > > Great product. > > It would be even greater if > > a) I could get X to register/comunicate all the extra stuff > > > Has anyone seen this done? I'd dearly loce to be able to use > > the little dial by the TAB key for volume control in xmms. > > To find out what keycodes your extra keys are bound to, run > xev(1) from an Xterm or similar. With your mouse pointer over the > little window that pops up, hit each extra key you are interested > in and make a note of its keycode value. We can stop right here: nothing gets reported. Robert Huff From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:50:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 65C7616A419 for ; Thu, 27 Dec 2007 19:50:29 +0000 (UTC) (envelope-from freebsd-questions@slightlystrange.org) Received: from catflap.slightlystrange.org (cpc5-cmbg1-0-0-cust497.cmbg.cable.ntl.com [86.6.1.242]) by mx1.freebsd.org (Postfix) with ESMTP id 219ED13C455 for ; Thu, 27 Dec 2007 19:50:28 +0000 (UTC) (envelope-from freebsd-questions@slightlystrange.org) Received: by catflap.slightlystrange.org (Postfix, from userid 106) id 0F765617F; Thu, 27 Dec 2007 19:50:28 +0000 (GMT) Received: from torus.slightlystrange.org (torus.slightlystrange.org [10.1.3.50]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by catflap.slightlystrange.org (Postfix) with ESMTP id 4ECCC60E8 for ; Thu, 27 Dec 2007 19:50:27 +0000 (GMT) Received: (from danielby@localhost) by torus.slightlystrange.org (8.14.2/8.13.4/Submit) id lBRJoQvx028582 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 19:50:26 GMT (envelope-from freebsd-questions@slightlystrange.org) Date: Thu, 27 Dec 2007 19:50:26 +0000 From: Daniel Bye To: freebsd-questions@freebsd.org Message-ID: <20071227195026.GB1076@torus.slightlystrange.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <18291.64856.135160.767803@jerusalem.litteratus.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="VrqPEDrXMn8OVzN4" Content-Disposition: inline In-Reply-To: <18291.64856.135160.767803@jerusalem.litteratus.org> User-Agent: Mutt/1.4.2.3i X-PGP-Fingerprint: D349 B109 0EB8 2554 4D75 B79A 8B17 F97C 1622 166A Subject: Re: Logitech keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Daniel Bye List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:50:29 -0000 --VrqPEDrXMn8OVzN4 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Dec 27, 2007 at 02:30:32PM -0500, Robert Huff wrote: > Daniel Bye writes: >=20 > > > I have a Logitech i-Touch keyboard; standard 104 (or whatever > > > it is these days) setup plus a dozen extra buttons and two dials. > > > Great product. > > > It would be even greater if > > > a) I could get X to register/comunicate all the extra stuff > > > > > Has anyone seen this done? I'd dearly loce to be able to use > > > the little dial by the TAB key for volume control in xmms. > > =20 > > To find out what keycodes your extra keys are bound to, run > > xev(1) from an Xterm or similar. With your mouse pointer over the > > little window that pops up, hit each extra key you are interested > > in and make a note of its keycode value. >=20 > We can stop right here: nothing gets reported. Absolutely nothing? Hmm. Never seen that before...=20 A few minutes' googling suggests that you might get on better with a different keyboard model in your xorg.conf. What's it currently set to? Mine is=20 Option "XkbModel" "pc101" Try looking for your keyboard in /usr/local/share/X11/xkb/rules/base.lst and try the model name in the first column. Apart from that, I have no idea, sorry. Dan --=20 Daniel Bye _ ASCII ribbon campaign ( ) - against HTML, vCards and X - proprietary attachments in e-mail / \ --VrqPEDrXMn8OVzN4 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHdAICixf5fBYiFmoRAr7/AJ9yY0mIc6tJ/MnUtnl0FPGREC+XAQCgxiQM iJlJVN6xqPLgeAakRhlWQ9A= =N+gi -----END PGP SIGNATURE----- --VrqPEDrXMn8OVzN4-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 19:53:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5266216A418 for ; Thu, 27 Dec 2007 19:53:31 +0000 (UTC) (envelope-from avatar4d@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.250]) by mx1.freebsd.org (Postfix) with ESMTP id 18B6E13C455 for ; Thu, 27 Dec 2007 19:53:30 +0000 (UTC) (envelope-from avatar4d@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so626185anc.13 for ; Thu, 27 Dec 2007 11:53:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=RAFupT+p/tigXCtbIoh+LYlwvOHJd9HvYvCet6HQd6U=; b=uw/B65Do8veWtVm4CNlsE3mKZoitCuskyA0LndloqyN6G30XXoi9BUtm024b7b/+VxY1eXy0wl0zMQZeiGWT6D8galZPJZJ1ADH9LmKLOaRFbUJTY/KCM1n3EUOm48uLlu4pQbefyEtAaQl3mzGDGQPiFT60JltsPRg0fMRGGHg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=qMJEfMPbiOg+kIO3QCLo74W6jWVXvpH6UHrBdfCbDbLci1QdT5Jo+GSPGB0PAtVu+fdlk584lHnHJnY9JIQEYYHlvINprz793aTl/j0gopHyFD0xl93prxXeuCHRcP1s8D21dttulhErl4iQ+rYh3VbWfZLE7WJTBwJKLJEQ8u4= Received: by 10.100.205.9 with SMTP id c9mr17255493ang.17.1198783714422; Thu, 27 Dec 2007 11:28:34 -0800 (PST) Received: by 10.100.41.15 with HTTP; Thu, 27 Dec 2007 11:28:34 -0800 (PST) Message-ID: <17489c7a0712271128y22b31285vdc2a4827bc72a66@mail.gmail.com> Date: Thu, 27 Dec 2007 14:28:34 -0500 From: "Chad Gross" To: aJTiM In-Reply-To: <200712271320.09481.lumiwa@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200712271320.09481.lumiwa@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: sysctl... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 19:53:31 -0000 On Dec 27, 2007 2:20 PM, aJTiM wrote: > Hi! > > I am running FreeBSD 7 beta4. When I start a computer and os loading I got one > message which I don't know why and how could I save a "problem" if it is a > problem. Beta 4 works very good and I don't have problems. > > hw.acpi.cpu.cx_lowest: C1 > sysctl: hw.acpi.cpu.cx_lowest: Invalid argument > > Thanks in advance. > -- > It just doesn't seem right to go over the river and through the woods > to Grandmother's condo. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > I am not running 7.0, so I am just guessing, but I am assuming you changed that option in /etc/sysctl.conf (or possibly copied your /etc directory from an older machine to the 7.0 machine). That would be the why you are getting that message during boot. The reason the message is appearing at all is most likely because that is not a current sysctl variable/option. I would check the sysctl manuals for that. -- Chad M. Gross From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 20:24:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 896FB16A417 for ; Thu, 27 Dec 2007 20:24:28 +0000 (UTC) (envelope-from erikt@midgard.homeip.net) Received: from ch-smtp01.sth.basefarm.net (ch-smtp01.sth.basefarm.net [80.76.149.212]) by mx1.freebsd.org (Postfix) with ESMTP id 1E78813C465 for ; Thu, 27 Dec 2007 20:24:28 +0000 (UTC) (envelope-from erikt@midgard.homeip.net) Received: from c83-253-25-183.bredband.comhem.se ([83.253.25.183]:49483 helo=falcon.midgard.homeip.net) by ch-smtp01.sth.basefarm.net with esmtp (Exim 4.68) (envelope-from ) id 1J7zHH-0007od-3Q for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 21:24:27 +0100 Received: (qmail 16493 invoked from network); 27 Dec 2007 21:24:24 +0100 Received: from owl.midgard.homeip.net (10.1.5.7) by falcon.midgard.homeip.net with ESMTP; 27 Dec 2007 21:24:24 +0100 Received: (qmail 45130 invoked by uid 1001); 27 Dec 2007 21:24:24 +0100 Date: Thu, 27 Dec 2007 21:24:24 +0100 From: Erik Trulsson To: Chad Gross Message-ID: <20071227202424.GA45074@owl.midgard.homeip.net> Mail-Followup-To: Chad Gross , aJTiM , freebsd-questions@freebsd.org References: <200712271320.09481.lumiwa@gmail.com> <17489c7a0712271128y22b31285vdc2a4827bc72a66@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <17489c7a0712271128y22b31285vdc2a4827bc72a66@mail.gmail.com> User-Agent: Mutt/1.5.16 (2007-06-09) X-Originating-IP: 83.253.25.183 X-Scan-Result: No virus found in message 1J7zHH-0007od-3Q. X-Scan-Signature: ch-smtp01.sth.basefarm.net 1J7zHH-0007od-3Q 1c0a9e02139521cb7e5b85b653b361de Cc: aJTiM , freebsd-questions@freebsd.org Subject: Re: sysctl... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 20:24:28 -0000 On Thu, Dec 27, 2007 at 02:28:34PM -0500, Chad Gross wrote: > On Dec 27, 2007 2:20 PM, aJTiM wrote: > > Hi! > > > > I am running FreeBSD 7 beta4. When I start a computer and os loading I got one > > message which I don't know why and how could I save a "problem" if it is a > > problem. Beta 4 works very good and I don't have problems. > > > > hw.acpi.cpu.cx_lowest: C1 > > sysctl: hw.acpi.cpu.cx_lowest: Invalid argument > > > > Thanks in advance. > > -- > > It just doesn't seem right to go over the river and through the woods > > to Grandmother's condo. > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > I am not running 7.0, so I am just guessing, but I am assuming you > changed that option in /etc/sysctl.conf (or possibly copied your /etc > directory from an older machine to the 7.0 machine). That would be the > why you are getting that message during boot. The reason the message > is appearing at all is most likely because that is not a current > sysctl variable/option. I would check the sysctl manuals for that. > More likely it is just differences in the ACPI support in the BIOS. I see the same message on one of my machines running 6-STABLE. On another machine also running 6-STABLE it instead says: hw.acpi.cpu.cx_lowest: C1 -> C1 Neither system has that option referenced in /etc/sysctl.conf Everything seems to work fine so I don't worry about it. -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 20:40:40 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6B86E16A419 for ; Thu, 27 Dec 2007 20:40:40 +0000 (UTC) (envelope-from timothyk@wallnet.com) Received: from mta4.srv.hcvlny.cv.net (mta4.srv.hcvlny.cv.net [167.206.4.199]) by mx1.freebsd.org (Postfix) with ESMTP id 4B3A513C447 for ; Thu, 27 Dec 2007 20:40:40 +0000 (UTC) (envelope-from timothyk@wallnet.com) Received: from www.smsd.tv (ool-18bb7953.dyn.optonline.net [24.187.121.83]) by mta4.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTQ00JR65CRFU80@mta4.srv.hcvlny.cv.net> for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 15:10:03 -0500 (EST) Received: from access.smsd.tv ([10.10.10.10]) by www.smsd.tv (8.14.2/8.14.2) with ESMTP id lBRKA0T6024092; Thu, 27 Dec 2007 15:10:00 -0500 (EST envelope-from timothyk@wallnet.com) Date: Thu, 27 Dec 2007 15:09:51 -0500 From: Tim Kellers In-reply-to: <4773994F.40707@gmail.com> To: "David M. Patronis" Message-id: <4774068F.3000505@wallnet.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT References: <4771D6B2.6090608@tundraware.com> <4771EAE1.4010501@tundraware.com> <4773305A.9050706@gmail.com> <477332A6.3050604@tundraware.com> <4773994F.40707@gmail.com> User-Agent: Thunderbird 2.0.0.9 (X11/20071127) Cc: tundra@tundraware.com, FreeBSD Mailing List Subject: Re: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 20:40:40 -0000 I have 18 brand new Gateway towers at work (I can supply the model numbers after school restarts next week). I wanted to clone them using dd and an external usb hard drive. I couldn't boot 6.x or 7.x CDs on any of the boxes, but I was able to install 7 (I didn't try 6.x) on a usb stick, set the BIOS to boot from the device and run FreeBSD (and dd) from there. These machines have CDRW/DVDR drives installed. I've had no problem running any content based media from them at all, but I haven't tried booting any other media (like WinXP) from them, either. Tim David M. Patronis wrote: > >> >> Not in this case. As I mentioned in a prior post, I tried booting >> with the 7.0-BETA4 ISO and got the exact same results. > Response: > > Yes, sorry about that; was in too much of a hurry and missed the later > posts. > > David >> >> > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > > From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 20:46:18 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 459A916A419 for ; Thu, 27 Dec 2007 20:46:18 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.190]) by mx1.freebsd.org (Postfix) with ESMTP id 281D513C455 for ; Thu, 27 Dec 2007 20:46:18 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so3557075rvb.43 for ; Thu, 27 Dec 2007 12:46:17 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=TsO71+7rzQRJ4PvoxfrNBXZb27CP+UnlWTbCkYvYPvM=; b=laKeayLYhi72zlBdGtDnjGxL5dA4PdRadL+A2g7zbcuhJls0gVbRFsDdSPyUD5re17ed4phYdswNtanB2hQI8o+wrddCY1MdzmB7YtaX8qrVDWdPPqSb3L3xyc43iRieYHog4G4sJFw0Enc1V5yhs1EaAMzQ7n/T7kOOvbYqzwo= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=UQx1ECEAPCUdfDR03sZhy0JOldDmwtS1+xHcq7UDyqznSRyy6SAXhFEhE5FIgp/dcwL2PBT+aK/WurMRr4OMZuhj+jjJQUGBJyc3zSpHXWfuLf7FE8NVyfQmeDuNXkjqOAovRXbLAbv16yBQykNBd+Rq4JWQmJNVGNUU0sXBRz4= Received: by 10.142.142.16 with SMTP id p16mr2721643wfd.119.1198788376977; Thu, 27 Dec 2007 12:46:16 -0800 (PST) Received: by 10.142.242.11 with HTTP; Thu, 27 Dec 2007 12:46:16 -0800 (PST) Message-ID: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> Date: Thu, 27 Dec 2007 15:46:16 -0500 From: "Maxim Khitrov" To: "User Questions" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 20:46:18 -0000 Hello, I'm currently setting up a new firewall for my home network using FreeBSD 7. The firewall will also act as our local name server (authoritative for the local domain, and caching for everything else). One of the things I'd like to do with it is use BIND to block various undesirable domains (ad servers, malicious sites, etc.). The plan is to have a separate BIND config file which is included in the main one. In that file I map all the blocked domains to either the empty zone or perhaps my local web server that's just serving a blank page for any request. Haven't decided which way is better yet. This file is updated periodically (once a week maybe) and BIND is then told to reload the config. That's the plan as it stands now, eventually I hope to add a web interface to the system for adding and removing blocked domains. My question for you guys is if know any _reliable_ sources for getting that list of domains in the first place? I currently use the hosts file on all my machines, which is about 2MB in size and hasn't been updated in several years. I'll definitely import all of those entries myself, but it would be good if I could periodically pull an updated list from somewhere else. The following site has a pretty decent collection of ad servers, though it's a bit short compared to what I already have: http://pgl.yoyo.org/adservers/. It even provides the list in a BIND format, meaning that I don't need to do any additional processing with it. Just fetch the page and reload BIND. This, however, is not one of my requirements. I'm perfectly happy getting just a list of the domains (in any format), and then processing them into a BIND config file myself. Just need good sources. What are your recommendations? - Max From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 20:49:41 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BD7B416A417 for ; Thu, 27 Dec 2007 20:49:41 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.freebsd.org (Postfix) with ESMTP id 284D813C45A for ; Thu, 27 Dec 2007 20:49:40 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from kobe.laptop (ppp1-28.pat.forthnet.gr [213.16.208.28]) (authenticated bits=128) by igloo.linux.gr (8.14.1/8.14.1/Debian-9) with ESMTP id lBRKnD6H025047 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 27 Dec 2007 22:49:34 +0200 Received: from kobe.laptop (kobe.laptop [127.0.0.1]) by kobe.laptop (8.14.2/8.14.2) with ESMTP id lBRKn8IL012658; Thu, 27 Dec 2007 22:49:08 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Received: (from keramida@localhost) by kobe.laptop (8.14.2/8.14.2/Submit) id lBRKn07b012650; Thu, 27 Dec 2007 22:49:00 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Date: Thu, 27 Dec 2007 22:49:00 +0200 From: Giorgos Keramidas To: Gary Kline Message-ID: <20071227204900.GD11961@kobe.laptop> References: <200712271902.lBRJ20FN003473@tao.thought.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200712271902.lBRJ20FN003473@tao.thought.org> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-4.086, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.31, BAYES_00 -2.60) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 20:49:41 -0000 On 2007-12-27 11:02, Gary Kline wrote: > I've been trtryinng to rebuild everything on tao to get my i810 > graphics working. Somehow, mutt bbroke. It seems to break with > something undefined in perl5.8. > > Anybody know what this is: > Undefined symbol "__sbmaskrune" ? That's odd. The mutt-devel port (which I am using to type and post this message) does not seem to depend on Perl: % $ pkg_info -r mutt\* % Information for mutt-devel-... % % Depends on: % Dependency: ispell-3.2.06_18 % Dependency: mime-support-3.39.1 % Dependency: libiconv-1.11_1 % Dependency: gettext-0.16.1_3 % % $ From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:27:06 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3CFA716A418 for ; Thu, 27 Dec 2007 21:27:06 +0000 (UTC) (envelope-from schiz0phrenic21@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.179]) by mx1.freebsd.org (Postfix) with ESMTP id 1E45D13C45D for ; Thu, 27 Dec 2007 21:27:06 +0000 (UTC) (envelope-from schiz0phrenic21@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5309411waf.3 for ; Thu, 27 Dec 2007 13:27:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=OOxDi2nVjC3wzNwSYHCHG7T98iMx3Kd3wurr5mBIMno=; b=weQAeEt4a5DJ7z9ulkF0fnowgKm9fF631JWoQSvsGSdBFby24eN8VgFqGASa2uAHIeTlTUDzaywfTZLa6XDIQjmdIgKP2u+dePZNtUJTJoM/PFKlwCVzHsYBlwi/veLBopiABvnGuLFFi3E3Dnur7vwpQlJYy6609HPg5IHcJL0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=O3RIFuM9+sivAxAoNVnsaVXvtocWs015jsl3ZUWi7l2ffwE6gWLmF+gL+U3zFllffxAYLDh6hqAiacfOJsKTAlD8xMs6J2MkOphgrVvOPXftji+8n7LXz/xRDf08N6KirDwp0HKe8A6aAmYI4DgNj/HAD9LXp2xBNrFGOJuL37M= Received: by 10.115.75.1 with SMTP id c1mr8225484wal.84.1198790825368; Thu, 27 Dec 2007 13:27:05 -0800 (PST) Received: by 10.114.52.14 with HTTP; Thu, 27 Dec 2007 13:27:05 -0800 (PST) Message-ID: <8d23ec860712271327g6859748evc09d25ab78fdfbf1@mail.gmail.com> Date: Thu, 27 Dec 2007 16:27:05 -0500 From: Schiz0 To: "Maxim Khitrov" In-Reply-To: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:27:06 -0000 On Dec 27, 2007 3:46 PM, Maxim Khitrov wrote: > Hello, > > I'm currently setting up a new firewall for my home network using > FreeBSD 7. The firewall will also act as our local name server > (authoritative for the local domain, and caching for everything else). > One of the things I'd like to do with it is use BIND to block various > undesirable domains (ad servers, malicious sites, etc.). The plan is > to have a separate BIND config file which is included in the main one. > In that file I map all the blocked domains to either the empty zone or > perhaps my local web server that's just serving a blank page for any > request. Haven't decided which way is better yet. This file is updated > periodically (once a week maybe) and BIND is then told to reload the > config. That's the plan as it stands now, eventually I hope to add a > web interface to the system for adding and removing blocked domains. > > My question for you guys is if know any _reliable_ sources for getting > that list of domains in the first place? I currently use the hosts > file on all my machines, which is about 2MB in size and hasn't been > updated in several years. I'll definitely import all of those entries > myself, but it would be good if I could periodically pull an updated > list from somewhere else. The following site has a pretty decent > collection of ad servers, though it's a bit short compared to what I > already have: http://pgl.yoyo.org/adservers/. It even provides the > list in a BIND format, meaning that I don't need to do any additional > processing with it. Just fetch the page and reload BIND. This, > however, is not one of my requirements. I'm perfectly happy getting > just a list of the domains (in any format), and then processing them > into a BIND config file myself. Just need good sources. What are your > recommendations? > > - Max > _______________________________________________ You could always try one of those ad-blocking databases for firefox. The Ad-Block Plus plugin, I was thinking of specifically. http://easylist.adblockplus.org You could grab that file, then parse it and grab the domains out of it to block. I know this isn't what you want, but it may come in useful anyway: http://www.okean.com/asianspamblocks.html From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:38:46 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A8F5916A421 for ; Thu, 27 Dec 2007 21:38:46 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.179]) by mx1.freebsd.org (Postfix) with ESMTP id 8A7E613C4F9 for ; Thu, 27 Dec 2007 21:38:46 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5315751waf.3 for ; Thu, 27 Dec 2007 13:38:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=n9sj5TLLR4bSAGWYIj+476BuYiJBON2XGAEIgBcM4cM=; b=KL84dTRZ5oosoSbII6ZzCxfpH9zX1CLjIb5qCoPGvRDIKFKdwm6rhLE63aCrLpgPwREyYFmqUfs9RqY3UsOCLNSJ5mLWQTWDwxefWfSXeR/HNvFCrHFLOUPD21l6qfpw3OK44jwAYDdiu9E2gXdzpE3MnN0izkgNlcBZ97bjRyE= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=dijZm8DqCtGUuNxIx9whoz4U5VbsoBA3Pi5nG1LdOzpvbGK9ejpZY5GEmtkIlyBeQwv8rjEQaemGYbnPHqneqSBofzBEuIqwD6cXoaWdh9/XptXpk22ll8UwK0J3zXiCBxdfPHMvD9QyIdvwETQzpwxSH47akRhzuhytN8oQ4B0= Received: by 10.114.160.1 with SMTP id i1mr6542017wae.49.1198791526057; Thu, 27 Dec 2007 13:38:46 -0800 (PST) Received: by 10.114.47.12 with HTTP; Thu, 27 Dec 2007 13:38:46 -0800 (PST) Message-ID: <839aec700712271338u56dd058cp51a783809f9a1f1d@mail.gmail.com> Date: Thu, 27 Dec 2007 14:38:46 -0700 From: "Darren Spruell" To: "Maxim Khitrov" In-Reply-To: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:38:46 -0000 On Dec 27, 2007 1:46 PM, Maxim Khitrov wrote: > Hello, > > I'm currently setting up a new firewall for my home network using > FreeBSD 7. The firewall will also act as our local name server > (authoritative for the local domain, and caching for everything else). > One of the things I'd like to do with it is use BIND to block various > undesirable domains (ad servers, malicious sites, etc.). The plan is > to have a separate BIND config file which is included in the main one. > In that file I map all the blocked domains to either the empty zone or > perhaps my local web server that's just serving a blank page for any > request. Haven't decided which way is better yet. This file is updated > periodically (once a week maybe) and BIND is then told to reload the > config. That's the plan as it stands now, eventually I hope to add a > web interface to the system for adding and removing blocked domains. > > My question for you guys is if know any _reliable_ sources for getting > that list of domains in the first place? I currently use the hosts > file on all my machines, which is about 2MB in size and hasn't been > updated in several years. I'll definitely import all of those entries > myself, but it would be good if I could periodically pull an updated > list from somewhere else. The following site has a pretty decent > collection of ad servers, though it's a bit short compared to what I > already have: http://pgl.yoyo.org/adservers/. It even provides the > list in a BIND format, meaning that I don't need to do any additional > processing with it. Just fetch the page and reload BIND. This, > however, is not one of my requirements. I'm perfectly happy getting > just a list of the domains (in any format), and then processing them > into a BIND config file myself. Just need good sources. What are your > recommendations? Look into the Blackhole-DNS project, formerly one of the BleedingThreats projects hosted at http://www.bleedingsnort.com/blackhole-dns/. This project tracks many hostile domains and produces BIND format files for this very purpose. It's not a great resource for ad blocking, as it focuses mainly on security threats (spyware, other malware, etc.) Since there has been some shuffling and reorganization happening around the BleedingThreats project, it's in a state of flux right now. The current home of the DNS-BH project is at http://malwaredomains.com/. -- Darren Spruell phatbuckett@gmail.com From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:41:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2323916A418 for ; Thu, 27 Dec 2007 21:41:03 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: from mail6.sea5.speakeasy.net (mail6.sea5.speakeasy.net [69.17.117.8]) by mx1.freebsd.org (Postfix) with ESMTP id 0DDC513C4DB for ; Thu, 27 Dec 2007 21:41:03 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: (qmail 12963 invoked from network); 27 Dec 2007 21:41:02 -0000 Received: from june.chuckr.org (HELO [66.92.151.194]) (chuckr@[66.92.151.194]) (envelope-sender ) by mail6.sea5.speakeasy.net (qmail-ldap-1.03) with AES256-SHA encrypted SMTP for ; 27 Dec 2007 21:41:02 -0000 Message-ID: <47741BFE.5020206@chuckr.org> Date: Thu, 27 Dec 2007 16:41:18 -0500 From: chuckr User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.6) Gecko/20070907 SeaMonkey/1.1.4 MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: lost X11 input from kybd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:41:03 -0000 I'm running FreeBSD-current. I updated about 30 hours ago, did a rebuild of world and the kernel (without changing my kernel config file at all. I have to explain that I start my X11 via startx, I dislike using anything like xdm (or kdm,gdm etc) so I always use startx, relying on a ~/.xinitrc I have doctored nicely, to get me into kde. Well, like I normally do, I loeed in as root on ttyv0, my user "chuckr" on ttyv1, and then did the startx as chuckr on ttyv1. Everything started up fine, but when I tried to kill an accientally started xterm, I found I couldn't kill it with a control-D. After a bit of experimentation, it became obvious that I coulld get no keyboard input. Thank god I can still use the mouse perfectly, so I can kill X11 for troubleshooting via the mouse fine. After I did that, I found that all my keyboard input which hadn't shown up on any xterm was pasted instead on the screen of ttyv1, from which I'd started up X11 to begin with. So, I can't get my keyboard input to go to X11. I would REALLY love any guesses at all about why this is, because I can';t use X now on FreeBSD, and that's my mailer. I am using a poor replacement for this now, so I would really like to know what's causinbg this ... Oh, I have to add, I tried rolling the kernel back to kernel.old, no differentce, it;s still bad. I tried (after moving kernel.old back to kernel) to download and install a new world and kernel. Still fails also. I need some help here, badly. Thanks. From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:46:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6EFF916A417 for ; Thu, 27 Dec 2007 21:46:52 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (gate6.infracaninophile.co.uk [IPv6:2001:8b0:151:1::1]) by mx1.freebsd.org (Postfix) with ESMTP id D7C2713C45B for ; Thu, 27 Dec 2007 21:46:51 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.14.2/8.14.2) with ESMTP id lBRLkhSx023840; Thu, 27 Dec 2007 21:46:44 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: Sendmail DKIM Filter v2.4.1 smtp.infracaninophile.co.uk lBRLkhSx023840 Authentication-Results: smtp.infracaninophile.co.uk; dkim=hardfail (SSP) header.i=unknown Message-ID: <47741D43.4010603@infracaninophile.co.uk> Date: Thu, 27 Dec 2007 21:46:43 +0000 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: Giorgos Keramidas References: <200712271902.lBRJ20FN003473@tao.thought.org> <20071227204900.GD11961@kobe.laptop> In-Reply-To: <20071227204900.GD11961@kobe.laptop> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (smtp.infracaninophile.co.uk [IPv6:::1]); Thu, 27 Dec 2007 21:46:45 +0000 (GMT) X-Virus-Scanned: ClamAV 0.92/5270/Thu Dec 27 17:48:18 2007 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.0 required=5.0 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on happy-idiot-talk.infracaninophile.co.uk Cc: Gary Kline , freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:46:52 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Giorgos Keramidas wrote: > On 2007-12-27 11:02, Gary Kline wrote: >> I've been trtryinng to rebuild everything on tao to get my i810 >> graphics working. Somehow, mutt bbroke. It seems to break with >> something undefined in perl5.8. >> >> Anybody know what this is: >> Undefined symbol "__sbmaskrune" ? > > That's odd. The mutt-devel port (which I am using to type and post this > message) does not seem to depend on Perl: > > % $ pkg_info -r mutt\* > % Information for mutt-devel-... > % > % Depends on: > % Dependency: ispell-3.2.06_18 > % Dependency: mime-support-3.39.1 > % Dependency: libiconv-1.11_1 > % Dependency: gettext-0.16.1_3 > % > % $ This is caused by a change to various ctype functions to do with improved UTF8 support recently, which inadvertently broke ABI compatability on RELENG_6. The change has since been reverted, but it seems that you were unlucky enough to install or upgrade some software during the month or so that it was in place, so that it is referring to symbols that do not exist in libc.so. Perl is just one of the places where __sbmaskrune can show up. There's been quite a lot of discussion of it on various lists recently: http://www.google.co.uk/search?hl=en&q=site%3Alists.freebsd.org+__sbmaskrune&btnG=Google+Search&meta= This, precisely, is the commit message where the ABI breakage you've seen was created: http://lists.freebsd.org/pipermail/cvs-src/2007-October/082836.html and here is where it was fixed: http://lists.freebsd.org/pipermail/cvs-src/2007-November/084046.html To sort out your system, basically make sure you're running a RELENG_6 version from after the fix was committed, and then I'm afraid you've just got to reinstall any software that shows the symptoms. Anything installed before the original commit that broke things will be fine -- it's just software that was recompiled using a RELENG_6 system from between 24 October and 20 November. It's only RELENG_6 that was affected -- the change went into RELENG_7 (and HEAD) where ABI changes are permitted with the new major version number, but RELENG_6_2, RELENG_6_3 and other release branches never had this patch applied. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdB1D8Mjk52CukIwRCMNSAJ0XiL1xfFz925+P+WVpmqRmG7AJTgCdGNkG APZBRHJq66NqxUScOJrjd8k= =JqqZ -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:50:25 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 065B716A41A for ; Thu, 27 Dec 2007 21:50:25 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id BE42F13C461 for ; Thu, 27 Dec 2007 21:50:24 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5321793waf.3 for ; Thu, 27 Dec 2007 13:50:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; bh=j9NArJaUIeJFwGejABYnwMT+rouRjHrY+1KaKKv1Aq0=; b=FnbJmxWcRYsciby7juat/ekjHWladgdWu72BFXRV0ktlAw4nBBwj2uWXRDpF6nEqnBebBS4Tw6rKkflVg9Hj5CsLq7ZICbyPUj1zdrPLOskt6Taub47Cn02ryeU1xEQa62JY31Zx7KLfX6zuO9YdMqkUOeOAobg2ZYwXsgDXk7M= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-face:x-attribution:x-os:x-os-version:x-os-architecture:x-uptime:face:organization:pgp:x-pgp:x-pgp-fp:user-agent:sender; b=ef8LMTBwsdhR8djmzqJoRQ2EPuMGmGcZXHojCMLSuSLDV+NhZUZ5dwsOwzKtCDj8H8y6zEtyNDftFEO9axO9cwcu3xKNtFCVrn5K38cgCeEpTwQatQpMzWVQoS4u1u4sn0+c5AHA/jckteLNXNVJs6Rm4xya6ciCK9gEaopRZyc= Received: by 10.115.88.1 with SMTP id q1mr6999821wal.64.1198792224249; Thu, 27 Dec 2007 13:50:24 -0800 (PST) Received: from chateau.d.lf ( [122.162.67.196]) by mx.google.com with ESMTPS id q18sm13137676pog.12.2007.12.27.13.50.21 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Dec 2007 13:50:24 -0800 (PST) Date: Fri, 28 Dec 2007 03:19:55 +0530 From: =?utf-8?B?4KSG4KS24KWA4KS3IOCktuClgeCkleCljeCksg==?= Ashish Shukla To: freebsd-questions@freebsd.org Message-ID: <20071227214955.GA382@chateau.d.lf> Mail-Followup-To: freebsd-questions@freebsd.org References: <47741BFE.5020206@chuckr.org> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="SLDf9lqlvOQaIe6s" Content-Disposition: inline In-Reply-To: <47741BFE.5020206@chuckr.org> X-Face: "\:nMpJ)EA!j>2nEu-[(+&o:N+CtL^AS\, Jv*LO5qBr#W2.\=d Subject: Re: lost X11 input from kybd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:50:25 -0000 --SLDf9lqlvOQaIe6s Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable ,--[ On Thu, Dec 27, 2007 at 04:41:18PM -0500, chuckr wrote: | I'm running FreeBSD-current. I updated about 30 hours ago, did a | rebuild of world and the kernel (without changing my kernel config file | at all. I have to explain that I start my X11 via startx, I dislike | using anything like xdm (or kdm,gdm etc) so I always use startx, relying | on a ~/.xinitrc I have doctored nicely, to get me into kde. Well, like | I normally do, I loeed in as root on ttyv0, my user "chuckr" on ttyv1, | and then did the startx as chuckr on ttyv1. Everything started up fine, | but when I tried to kill an accientally started xterm, I found I | couldn't kill it with a control-D. After a bit of experimentation, it | became obvious that I coulld get no keyboard input. Thank god I can | still use the mouse perfectly, so I can kill X11 for troubleshooting via | the mouse fine. After I did that, I found that all my keyboard input | which hadn't shown up on any xterm was pasted instead on the screen of | ttyv1, from which I'd started up X11 to begin with. |=20 | So, I can't get my keyboard input to go to X11. I would REALLY love any | guesses at all about why this is, because I can';t use X now on | FreeBSD, and that's my mailer. I am using a poor replacement for this | now, so I would really like to know what's causinbg this ... |=20 | Oh, I have to add, I tried rolling the kernel back to kernel.old, no | differentce, it;s still bad. I tried (after moving kernel.old back to | kernel) to download and install a new world and kernel. Still fails | also. I need some help here, badly. Very basic guess, but does your xorg.conf is reconfigured recently, check for something like following in xorg.conf: ---8<----8<---- Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection --->8---->8---- Anyways, have you tried 'xinit xterm', to see if X11 is receiving keyboard input, without KDE ? see, if there're any suspecting error messages, in your /var/log/Xorg.0.log HTH --=20 Ashish Shukla =E0=A4=86=E0=A4=B6=E0=A5=80=E0=A4=B7 =E0=A4=B6=E0=A5=81=E0=A4= =95=E0=A5=8D=E0=A4=B2 http://wahjava.wordpress.com/ =C2=B7-- =C2=B7- =C2=B7=C2=B7=C2=B7=C2=B7 =C2=B7--- =C2=B7- =C2=B7=C2=B7=C2= =B7- =C2=B7- =C2=B7--=C2=B7-=C2=B7 --=C2=B7 -- =C2=B7- =C2=B7=C2=B7 =C2=B7-= =C2=B7=C2=B7 =C2=B7-=C2=B7-=C2=B7- -=C2=B7-=C2=B7 --- -- --SLDf9lqlvOQaIe6s Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHdB4DHy+EEHYuXnQRAokQAJwJc8Dsz9pJhGeVR3G3xbwvq0InuACeNrxF tVSMTBydVJe5lDdctEgCgZY= =AbYk -----END PGP SIGNATURE----- --SLDf9lqlvOQaIe6s-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 21:56:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2835816A41A for ; Thu, 27 Dec 2007 21:56:49 +0000 (UTC) (envelope-from terry@sucked-in.com) Received: from mail.sucked-in.com (got.sucked-in.com [64.251.22.156]) by mx1.freebsd.org (Postfix) with ESMTP id 00C8F13C457 for ; Thu, 27 Dec 2007 21:56:48 +0000 (UTC) (envelope-from terry@sucked-in.com) Received: from localhost (got.sucked-in.com [64.251.22.156]) by mail.sucked-in.com (Postfix) with ESMTP id C71771CD13 for ; Fri, 28 Dec 2007 08:47:10 +1100 (EST) X-Virus-Scanned: amavisd-new at sucked-in.com Received: from mail.sucked-in.com ([64.251.22.156]) by localhost (mail.sucked-in.com [64.251.22.156]) (amavisd-new, port 10024) with ESMTP id LOIoYmzbvgpf for ; Fri, 28 Dec 2007 08:47:10 +1100 (EST) Received: from TerryPC (unknown [220.253.18.68]) (using TLSv1 with cipher AES128-SHA (128/128 bits)) (No client certificate requested) by mail.sucked-in.com (Postfix) with ESMTP id B5F461CC44 for ; Fri, 28 Dec 2007 08:47:09 +1100 (EST) From: "Terry Sposato" To: "'User Questions'" Date: Fri, 28 Dec 2007 08:46:54 +1100 Message-ID: <001201c848d2$0a899560$1f9cc020$@com> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AchI0fyNtgk+gGzfRDKp5mCpVYYOeg== Content-Language: en-au x-cr-hashedpuzzle: APLD AdbE Avn7 CVa1 CbC5 DXGM EbNo Eq3p GNoh HCOs ItaW I4Ut JUTd J7UQ K/mG LJg9; 1; ZgByAGUAZQBiAHMAZAAtAHEAdQBlAHMAdABpAG8AbgBzAEAAZgByAGUAZQBiAHMAZAAuAG8AcgBnAA==; Sosha1_v1; 7; {1D69C41A-C7A6-4A45-930E-ECA99AC7509D}; dABlAHIAcgB5AEAAcwB1AGMAawBlAGQALQBpAG4ALgBjAG8AbQA=; Thu, 27 Dec 2007 21:46:50 GMT; SwBlAHIAbgBlAGwAIABMAG8AZwAgAE0AZQBzAHMAYQBnAGUAcwAgAGkAbgAgAFMAZQBjAHUAcgBpAHQAeQAgAE8AdQB0AHAAdQB0AA== x-cr-puzzleid: {1D69C41A-C7A6-4A45-930E-ECA99AC7509D} Subject: Kernel Log Messages in Security Output X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 21:56:49 -0000 Hi, Just got the following in my security run output and wondering what exactly it means: +++ /tmp/security.zNWgsW2T Fri Dec 28 03:01:05 2007 +(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 +(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error +(da0:umass-sim1:1:0:0): SCSI Status: Check Condition +(da0:umass-sim1:1:0:0): NOT READY asc:3a,0 +(da0:umass-sim1:1:0:0): Medium not present +(da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 +(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 +(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error +(da0:umass-sim1:1:0:0): SCSI Status: Check Condition +(da0:umass-sim1:1:0:0): NOT READY asc:3a,0 +(da0:umass-sim1:1:0:0): Medium not present +(da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 If anyone can shed some light on it or point me to some documentation that would be great. As far as I can tell the machine is running fine. There is hardware raid setup with mirroring on this box. There are no errors on the physical machine itself. Regards, Terry http://www.sucked-in.com Have you been sucked in? From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:00:14 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BF7A716A41B for ; Thu, 27 Dec 2007 22:00:14 +0000 (UTC) (envelope-from rsmith@xs4all.nl) Received: from smtp-vbr3.xs4all.nl (smtp-vbr3.xs4all.nl [194.109.24.23]) by mx1.freebsd.org (Postfix) with ESMTP id 6362413C457 for ; Thu, 27 Dec 2007 22:00:14 +0000 (UTC) (envelope-from rsmith@xs4all.nl) Received: from slackbox.xs4all.nl (slackbox.xs4all.nl [213.84.242.160]) by smtp-vbr3.xs4all.nl (8.13.8/8.13.8) with ESMTP id lBRM0BTO010075; Thu, 27 Dec 2007 23:00:12 +0100 (CET) (envelope-from rsmith@xs4all.nl) Received: by slackbox.xs4all.nl (Postfix, from userid 1001) id 65053B829; Thu, 27 Dec 2007 23:00:11 +0100 (CET) Date: Thu, 27 Dec 2007 23:00:11 +0100 From: Roland Smith To: Gary Kline Message-ID: <20071227220011.GA64528@slackbox.xs4all.nl> Mail-Followup-To: Gary Kline , freebsd-questions@freebsd.org References: <200712271902.lBRJ20FN003473@tao.thought.org> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Dxnq1zWXvFF0Q93v" Content-Disposition: inline In-Reply-To: <200712271902.lBRJ20FN003473@tao.thought.org> X-GPG-Fingerprint: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 X-GPG-Key: http://www.xs4all.nl/~rsmith/pubkey.txt X-GPG-Notice: If this message is not signed, don't assume I sent it! User-Agent: Mutt/1.5.17 (2007-11-01) X-Virus-Scanned: by XS4ALL Virus Scanner Cc: freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:00:14 -0000 --Dxnq1zWXvFF0Q93v Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Dec 27, 2007 at 11:02:00AM -0800, Gary Kline wrote: >=20 >=20 >=20 >=20 > I've been trtryinng to rebuild everything on tao to get my i810 > graphics working. Somehow, mutt bbroke. It seems to break with=20 > something undefined in perl5.8. =20 I don't think it is perl; mutt doesn't depend on it. > Anybody know what this is: >=20 > Undefined symbol "__sbmaskrune" ? >=20 > tia,=20 If you google for __sbmaskrune, you'll find this; http://bsdpants.blogspot.com/2007/11/yuck-undefined-symbol-sbmaskrune.html Looks like you'll have to update the base system to a state after the following commit; http://lists.freebsd.org/pipermail/cvs-src/2007-November/084046.html Roland --=20 R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) --Dxnq1zWXvFF0Q93v Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHdCBrEnfvsMMhpyURAp9AAJ4zb77ogrXIQx2msE/ghk8OIe3wTQCeIx8Z ehWKrT5mHPf79kjyry4WbhI= =bhjN -----END PGP SIGNATURE----- --Dxnq1zWXvFF0Q93v-- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:12:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A278816A417 for ; Thu, 27 Dec 2007 22:12:11 +0000 (UTC) (envelope-from robert_d@usa.net) Received: from cmsout01.mbox.net (cmsout01.mbox.net [165.212.64.31]) by mx1.freebsd.org (Postfix) with ESMTP id 89DDE13C4CE for ; Thu, 27 Dec 2007 22:12:11 +0000 (UTC) (envelope-from robert_d@usa.net) Received: from cmsout01.mbox.net (cmsout01.mbox.net [165.212.64.31]) by cmsout01.mbox.net (Postfix) with ESMTP id DC77C4DE2 for ; Thu, 27 Dec 2007 22:00:37 +0000 (GMT) Received: from cmsapps03.cms.usa.net [165.212.11.132] by cmsout01.mbox.net via smtad (C8.MAIN.3.34P) with ESMTP id XID657LLAwaM5589X01; Thu, 27 Dec 2007 22:00:38 -0000 X-USANET-Source: 165.212.11.132 IN robert_d@usa.net cmsapps03.cms.usa.net X-USANET-MsgId: XID657LLAwaM5589X01 Received: from cmsweb22.cms.usa.net [165.212.8.22] by cmsapps03.cms.usa.net (ESMTP/robert_d@usa.net) via mtad (C8.MAIN.3.40M) with ESMTP id 251LLAwaj0136M39; Thu, 27 Dec 2007 22:00:35 -0000 X-USANET-Auth: 165.212.8.22 AUTO robert_d@usa.net cmsweb22.cms.usa.net Received: from 207.81.99.70 [207.81.99.70] by cmsweb22.cms.usa.net (USANET web-mailer CM.0402.7.83); Thu, 27 Dec 2007 22:00:34 -0000 Date: Thu, 27 Dec 2007 17:00:34 -0500 From: "Rob Dalzell" To: X-Mailer: USANET web-mailer (CM.0402.7.83) Mime-Version: 1.0 Message-ID: <476LLAV8I9056S22.1198792834@cmsweb22.cms.usa.net> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Z-USANET-MsgId: XID251LLAwaj0136X39 Subject: FTPd INETd No Response But SFTP Works. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:12:11 -0000 Hi I'm having trouble understanding why my FTPd is not responding. I have uncommented FTP in inetd.conf, inetd is enabled in rc.conf. There have be= en no changes to the default setup of FreeBSD 6.2 AMD 64 other then the ports install of php5 apache and mysql, so everything is set to basic security,= hosts.allow is untouched, and allowing all access. I do have SSHD installed and I have been using SFTP up untill now. I am configuring a php script that attempts to update it's self using the PHP5= -FTP mod, but this php mod does not work correctly with SFTP, so I have tried = to enable the FTPd (Like I have in the past). I cannot make a connection to= the FTP on port 21 with any FTP Client, just hangs. I tried ports install of pure-ftp, as well, I could not connect to it eit= her. I can see them running in top, I can see inetd monitoring port 21 in sock= stat, but something just refuses to work. Is there any known issue of having SFTP on port 22 and FTPd on 21 working= together? If anyone has a suggestion I'd appreciate any help. Rob From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:23:16 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C2AE916A417 for ; Thu, 27 Dec 2007 22:23:16 +0000 (UTC) (envelope-from fquest@ccstores.com) Received: from mail.qcislands.net (mail.qcislands.net [209.53.238.4]) by mx1.freebsd.org (Postfix) with ESMTP id AF9F213C447 for ; Thu, 27 Dec 2007 22:23:16 +0000 (UTC) (envelope-from fquest@ccstores.com) Received: from [209.53.237.85] (helo=[192.168.1.4]) by mail.qcislands.net with esmtp (Exim 4.68) (envelope-from ) id 1J80qp-0006WJ-F0 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 14:05:15 -0800 Message-ID: <4774219C.4010705@ccstores.com> Date: Thu, 27 Dec 2007 14:05:16 -0800 From: Jim Pazarena User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <200711081455.39635.cesar@expresso.com.br> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-local_scan: locally submitted (85) Subject: Re: About Freebsd 7.0 versus 6.3 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:23:16 -0000 Aryeh Friedman wrote: > On Nov 8, 2007 11:55 AM, Expresso Digital ISP wrote: > >> Hi, my name is Cesar. >> >> I'd like to know what is the diference between 7.0 and 6.3 and why create a >> newest version and after old version. >> > > 6.X is the last of versions meant primarilly for single processing > machines (with some after thought payed to multiprocessing). > > 7.X is the beginning of the versions specifically designed with > multiprocessing/cores in mind > > Under the hood many things have been changed improved in 7.... the > offical recommendation is 6.3 is for people who can *NOT* upgrade to 7 > for whatever reason and everyone else should use 7... note as far most > people can tell there is no "easy" way to upgrade to 7 if you have 6 > installed so you should start with 7 > When installing a test of 7.0 B4, I found that directories which I have traditionally used (/usr/local/libexec /usr/local/include /usr/local/lib /usr/local/sbin /usr/local/man/* etc) and /etc/make.conf are not visible in a default install. Is this because the B4 is missing them, or has there been a serious change in directory & file structure? From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:27:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AC48216A417 for ; Thu, 27 Dec 2007 22:27:04 +0000 (UTC) (envelope-from perryh@pluto.rain.com) Received: from agora.rdrop.com (agora.rdrop.com [199.26.172.34]) by mx1.freebsd.org (Postfix) with ESMTP id 995BC13C442 for ; Thu, 27 Dec 2007 22:27:04 +0000 (UTC) (envelope-from perryh@pluto.rain.com) Received: from agora.rdrop.com (66@localhost [127.0.0.1]) by agora.rdrop.com (8.13.1/8.12.7) with ESMTP id lBRMR0OM016604 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 27 Dec 2007 14:27:01 -0800 (PST) (envelope-from perryh@pluto.rain.com) Received: (from uucp@localhost) by agora.rdrop.com (8.13.1/8.12.9/Submit) with UUCP id lBRMR0So016603; Thu, 27 Dec 2007 14:27:00 -0800 (PST) Received: from fbsd61 by pluto.rain.com (4.1/SMI-4.1-pluto-M2060407) id AA15970; Thu, 27 Dec 07 14:23:57 PST Date: Thu, 27 Dec 2007 14:22:32 -0800 From: perryh@pluto.rain.com To: kline@tao.thought.org, keramida@ceid.upatras.gr Message-Id: <477425a8.NN1TBR+ar8VpyWTQ%perryh@pluto.rain.com> References: <200712271902.lBRJ20FN003473@tao.thought.org> <20071227204900.GD11961@kobe.laptop> In-Reply-To: <20071227204900.GD11961@kobe.laptop> User-Agent: nail 11.25 7/29/05 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:27:04 -0000 Giorgos Keramidas wrote: > On 2007-12-27 11:02, Gary Kline wrote: > > I've been trtryinng to rebuild everything on tao to get my i810 > > graphics working. Somehow, mutt bbroke. It seems to break with > > something undefined in perl5.8. > > > > Anybody know what this is: > > Undefined symbol "__sbmaskrune" ? > > That's odd. The mutt-devel port (which I am using to type > and post this message) does not seem to depend on Perl: Last time I recall seeing a symbol name ending in "rune" it had something to do with handling charsets and/or locales. From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:37:39 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 56CB416A41A for ; Thu, 27 Dec 2007 22:37:39 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 8D28513C4D1; Thu, 27 Dec 2007 22:37:38 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <47742930.3060709@FreeBSD.org> Date: Thu, 27 Dec 2007 23:37:36 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Jim Pazarena References: <200711081455.39635.cesar@expresso.com.br> <4774219C.4010705@ccstores.com> In-Reply-To: <4774219C.4010705@ccstores.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: About Freebsd 7.0 versus 6.3 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:37:39 -0000 Jim Pazarena wrote: > Aryeh Friedman wrote: >> On Nov 8, 2007 11:55 AM, Expresso Digital ISP >> wrote: >> >>> Hi, my name is Cesar. >>> >>> I'd like to know what is the diference between 7.0 and 6.3 and why >>> create a >>> newest version and after old version. >>> >> >> 6.X is the last of versions meant primarilly for single processing >> machines (with some after thought payed to multiprocessing). >> >> 7.X is the beginning of the versions specifically designed with >> multiprocessing/cores in mind >> >> Under the hood many things have been changed improved in 7.... the >> offical recommendation is 6.3 is for people who can *NOT* upgrade to 7 >> for whatever reason and everyone else should use 7... note as far most >> people can tell there is no "easy" way to upgrade to 7 if you have 6 >> installed so you should start with 7 >> > > When installing a test of 7.0 B4, I found that directories which I have > traditionally used > (/usr/local/libexec /usr/local/include /usr/local/lib > /usr/local/sbin /usr/local/man/* etc) > and /etc/make.conf are not visible in a default install. Is this because > the B4 is missing them, or has there > been a serious change in directory & file structure? They should be created (except maybe make.conf, which is empty by default). Kris From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 22:41:45 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1526016A417 for ; Thu, 27 Dec 2007 22:41:45 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (gate6.infracaninophile.co.uk [IPv6:2001:8b0:151:1::1]) by mx1.freebsd.org (Postfix) with ESMTP id 6FB7F13C442 for ; Thu, 27 Dec 2007 22:41:44 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.14.2/8.14.2) with ESMTP id lBRMfak0024556; Thu, 27 Dec 2007 22:41:36 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: Sendmail DKIM Filter v2.4.1 smtp.infracaninophile.co.uk lBRMfak0024556 Authentication-Results: smtp.infracaninophile.co.uk; dkim=hardfail (SSP) header.i=unknown Message-ID: <47742A20.2030102@infracaninophile.co.uk> Date: Thu, 27 Dec 2007 22:41:36 +0000 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: Jim Pazarena References: <200711081455.39635.cesar@expresso.com.br> <4774219C.4010705@ccstores.com> In-Reply-To: <4774219C.4010705@ccstores.com> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (smtp.infracaninophile.co.uk [IPv6:::1]); Thu, 27 Dec 2007 22:41:36 +0000 (GMT) X-Virus-Scanned: ClamAV 0.92/5270/Thu Dec 27 17:48:18 2007 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.0 required=5.0 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on happy-idiot-talk.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: About Freebsd 7.0 versus 6.3 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 22:41:45 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Jim Pazarena wrote: > When installing a test of 7.0 B4, I found that directories which I have > traditionally used > (/usr/local/libexec /usr/local/include /usr/local/lib > /usr/local/sbin /usr/local/man/* etc) > and /etc/make.conf are not visible in a default install. Is this because > the B4 is missing them, or has there > been a serious change in directory & file structure? No, it's just that you haven't installed any ports on your 7.0 system yet. Once you do that, /usr/local will be populated as you expect. /etc/make.conf you just have to write yourself. There isn't a default version. You can look at /usr/share/examples/etc/make.conf and make.conf(5) for guidance. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdCof8Mjk52CukIwRCEepAKCQ/ZV1eeVTDMsFHjW34vPYQgkQfgCgjuw8 uA6loIR+6N7EW2DFkX4DBeo= =4blg -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 23:12:12 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 52E2A16A520 for ; Thu, 27 Dec 2007 23:12:12 +0000 (UTC) (envelope-from noah@juniper.net) Received: from psmtp.com (exprod7og106.obsmtp.com [64.18.2.165]) by mx1.freebsd.org (Postfix) with ESMTP id 1999713C45A for ; Thu, 27 Dec 2007 23:12:11 +0000 (UTC) (envelope-from noah@juniper.net) Received: from source ([66.129.224.36]) by exprod7ob106.postini.com ([64.18.6.12]) with SMTP; Thu, 27 Dec 2007 15:12:11 PST Received: from emailsmtp54.jnpr.net ([172.24.18.127]) by gamma.jnpr.net with Microsoft SMTPSVC(6.0.3790.1830); Thu, 27 Dec 2007 14:14:17 -0800 Received: from Macintosh-5.local ([172.24.241.228]) by emailsmtp54.jnpr.net with Microsoft SMTPSVC(6.0.3790.3959); Thu, 27 Dec 2007 14:14:10 -0800 Message-ID: <477423B1.3040206@juniper.net> Date: Thu, 27 Dec 2007 14:14:09 -0800 From: Noah Garrett Wallach User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: User Questions Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 27 Dec 2007 22:14:10.0919 (UTC) FILETIME=[CE76DF70:01C848D5] Subject: port knocking X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 23:12:12 -0000 Hi there, doorman is core dumping and not working properly. could somebody please recommend a good port knocker? Cheers, Noah -- Noah Garrett Wallach Juniper Networks Consulting Engineer 1194 North Mathilda Avenue Professional Services Sunnyvale CA 94089 noah@juniper.net tel: +1-408-936-7363 fax: +1-415-431-7726 ----------------------------------------------------- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 23:14:39 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0B53E16A419 for ; Thu, 27 Dec 2007 23:14:39 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: from mail5.sea5.speakeasy.net (mail5.sea5.speakeasy.net [69.17.117.7]) by mx1.freebsd.org (Postfix) with ESMTP id EA87613C45A for ; Thu, 27 Dec 2007 23:14:38 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: (qmail 13220 invoked from network); 27 Dec 2007 23:14:38 -0000 Received: from april.chuckr.org (chuckr@[66.92.151.30]) (envelope-sender ) by mail5.sea5.speakeasy.net (qmail-ldap-1.03) with AES256-SHA encrypted SMTP for ; 27 Dec 2007 23:14:38 -0000 Message-ID: <47743110.3010507@chuckr.org> Date: Thu, 27 Dec 2007 18:11:12 -0500 From: Chuck Robey User-Agent: Thunderbird 2.0.0.6 (X11/20071107) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <47741BFE.5020206@chuckr.org> <20071227214955.GA382@chateau.d.lf> In-Reply-To: <20071227214955.GA382@chateau.d.lf> X-Enigmail-Version: 0.95.5 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subject: Re: lost X11 input from kybd-SOLVED! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 23:14:39 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 आशीष शà¥à¤•à¥à¤² Ashish Shukla wrote: > ,--[ On Thu, Dec 27, 2007 at 04:41:18PM -0500, chuckr wrote: > | I'm running FreeBSD-current. I updated about 30 hours ago, did a > | rebuild of world and the kernel (without changing my kernel config file > | at all. I have to explain that I start my X11 via startx, I dislike > | using anything like xdm (or kdm,gdm etc) so I always use startx, relying > | on a ~/.xinitrc I have doctored nicely, to get me into kde. Well, like > | I normally do, I loeed in as root on ttyv0, my user "chuckr" on ttyv1, > | and then did the startx as chuckr on ttyv1. Everything started up fine, > | but when I tried to kill an accientally started xterm, I found I > | couldn't kill it with a control-D. After a bit of experimentation, it > | became obvious that I coulld get no keyboard input. Thank god I can > | still use the mouse perfectly, so I can kill X11 for troubleshooting via > | the mouse fine. After I did that, I found that all my keyboard input > | which hadn't shown up on any xterm was pasted instead on the screen of > | ttyv1, from which I'd started up X11 to begin with. > | > | So, I can't get my keyboard input to go to X11. I would REALLY love any > | guesses at all about why this is, because I can';t use X now on > | FreeBSD, and that's my mailer. I am using a poor replacement for this > | now, so I would really like to know what's causinbg this ... > | > | Oh, I have to add, I tried rolling the kernel back to kernel.old, no > | differentce, it;s still bad. I tried (after moving kernel.old back to > | kernel) to download and install a new world and kernel. Still fails > | also. I need some help here, badly. > > Very basic guess, but does your xorg.conf is reconfigured recently, > check for something like following in xorg.conf: Nice guess, but no, no changes in my xorg.conf file. Doesn't amtter too much, because I've solved the problem. I recalled a change I made in my config file about 2 weeks ago. I figued it was too minor to count, so I completely forgot I even did it until I wemt looking thru my kernel config with an eye towards hackery, then I remembered that one line I'd added, to restrict the number of virtual terminals to 8. That's what used to be standard, way back when, but I recently saw in the manual that the default's now 16. I know that X servers make use of the highest free terminal, and it COULD be possible that someone coding that up decided not to check the number, just to reply on a default ... now that the problem has disappeared (with only that one change, so it's a certainty what fixed it), I have a bit of a suspicion about that code now. Ahh, heck, who cares. Least it works. Thanks for the effort. > ---8<----8<---- > Section "ServerLayout" > Identifier "single head configuration" > Screen 0 "Screen0" 0 0 > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > --->8---->8---- > > Anyways, have you tried 'xinit xterm', to see if X11 is receiving > keyboard input, without KDE ? see, if there're any suspecting error > messages, in your /var/log/Xorg.0.log > > HTH -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdDEQz62J6PPcoOkRAg6mAJ9EVrGx4Tqxdw9Oywewm3rCSzJwPwCeKdie hBwNE8EAn0CszCOWAPNy8/U= =SKRY -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 23:20:08 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EC10C16A417 for ; Thu, 27 Dec 2007 23:20:08 +0000 (UTC) (envelope-from schiz0phrenic21@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id D06D013C45B for ; Thu, 27 Dec 2007 23:20:08 +0000 (UTC) (envelope-from schiz0phrenic21@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5368615waf.3 for ; Thu, 27 Dec 2007 15:20:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=gvVxKb0kEVTGLNDN3OQMD5sff8pHHjwKgAnRCHCJuEw=; b=n/AyJGVlV842wTjTUGyTZgyyApFpXu4siaO/K6DiaOeZOHYwjwTZYRlSldWZME0XpHObhZiPtyuXjQ5mkye4B0uKZ3DB57UNMkXJng4nv0f80zkxOvetKyMSj3ayds/Wp8JjUa2BseJZ7UAPYv0iSVV6JdulNywnLageWqw7me8= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=fzJohIvjao+N/9XMukiQmiHPP2qoPug+8V02xxJTfVoLOPKGe99rJ3MKPb+pWphiTFZS55tuX3OmQTWyUo+rlrxk+pW+S9iBKpyoW8fViTPfqP2D+SmW0dcf9HfBOPknHwBMbDsv+CqGZvFCNhdZrmAEjJUUCsAsYUh37128YIM= Received: by 10.114.200.2 with SMTP id x2mr6971725waf.19.1198797608526; Thu, 27 Dec 2007 15:20:08 -0800 (PST) Received: by 10.114.52.14 with HTTP; Thu, 27 Dec 2007 15:20:08 -0800 (PST) Message-ID: <8d23ec860712271520y5b31a340gdf0acdeaf98c931b@mail.gmail.com> Date: Thu, 27 Dec 2007 18:20:08 -0500 From: Schiz0 To: "Noah Garrett Wallach" In-Reply-To: <477423B1.3040206@juniper.net> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <477423B1.3040206@juniper.net> Cc: User Questions Subject: Re: port knocking X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 23:20:09 -0000 On Dec 27, 2007 5:14 PM, Noah Garrett Wallach wrote: > Hi there, > > doorman is core dumping and not working properly. could somebody please > recommend a good port knocker? > > Cheers, > > Noah > Why don't you use the suggestions made on the Ubuntu mailing list? You know, the one you JUST posted the same EXACT message to, and got several replies? From owner-freebsd-questions@FreeBSD.ORG Thu Dec 27 23:30:45 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7D4BA16A417 for ; Thu, 27 Dec 2007 23:30:45 +0000 (UTC) (envelope-from mark@foster.cc) Received: from QMTA03.westchester.pa.mail.comcast.net (qmta03.westchester.pa.mail.comcast.net [76.96.62.32]) by mx1.freebsd.org (Postfix) with ESMTP id 2AF1D13C447 for ; Thu, 27 Dec 2007 23:30:45 +0000 (UTC) (envelope-from mark@foster.cc) Received: from OMTA03.westchester.pa.mail.comcast.net ([76.96.62.27]) by QMTA03.westchester.pa.mail.comcast.net with comcast id VwDx1Y00N0bG4ec050Jq00; Thu, 27 Dec 2007 23:30:44 +0000 Received: from fosgate.dyndns.org ([71.231.158.147]) by OMTA03.westchester.pa.mail.comcast.net with comcast id VzWi1Y00G3B62Q73P00000; Thu, 27 Dec 2007 23:30:44 +0000 X-Authority-Analysis: v=1.0 c=1 a=uRvBVVMuVl0A:10 a=81ABGVOTAAAA:8 a=KJGelZ30RwGTI3M3UbsA:9 a=C8_FzZKWUAodGyfxjKi9ams1PbQA:4 a=vNGxQsTWjH8A:10 Received: from localhost (localhost [127.0.0.1]) by fosgate.dyndns.org (Postfix) with ESMTP id 900CD39828; Thu, 27 Dec 2007 15:25:34 -0800 (PST) X-Virus-Scanned: amavisd-new at foster.cc Received: from fosgate.dyndns.org ([127.0.0.1]) by localhost (sonar.foster.dmz [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id C3IeoERLqOsJ; Thu, 27 Dec 2007 15:25:28 -0800 (PST) Received: from [192.168.1.9] (monk.foster.dmz [192.168.1.9]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) (Authenticated sender: mdf) by fosgate.dyndns.org (Postfix) with ESMTP id 8B50D39825; Thu, 27 Dec 2007 15:25:28 -0800 (PST) Message-ID: <477435AA.1070503@foster.cc> Date: Thu, 27 Dec 2007 15:30:50 -0800 From: "Mark D. Foster" User-Agent: Thunderbird 2.0.0.6 (X11/20071022) MIME-Version: 1.0 To: Maxim Khitrov References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> In-Reply-To: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Dec 2007 23:30:45 -0000 Maxim Khitrov wrote: > into a BIND config file myself. Just need good sources. What are your > recommendations? > I keep a small but potent list of undesirables as described here... http://mark.foster.cc/wiki/index.php/Trackers -- Said one park ranger, 'There is considerable overlap between the intelligence of the smartest bears and the dumbest tourists.' Mark D. Foster, CISSP http://mark.foster.cc/ From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:10:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F041716A419 for ; Fri, 28 Dec 2007 00:10:54 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from typhoon.enabled.com (typhoon.enabled.com [216.218.220.21]) by mx1.freebsd.org (Postfix) with ESMTP id D69E613C44B for ; Fri, 28 Dec 2007 00:10:54 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from Macintosh-5.local (natint3.juniper.net [66.129.224.36]) (authenticated bits=0) by typhoon.enabled.com (8.14.1/8.14.1) with ESMTP id lBRNln0C072633 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Thu, 27 Dec 2007 15:47:50 -0800 (PST) (envelope-from admin2@enabled.com) Message-ID: <47743999.3010908@enabled.com> Date: Thu, 27 Dec 2007 15:47:37 -0800 From: Noah User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: User Questions Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: removing ipfw rules X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:10:55 -0000 Hi, I have two ipfw rules that I want to remove. They are viewable with the "ipfw show" command --- snip --- 06600 0 0 allow ip from any to any proto tcp src-ip 66.66.66.66 dst-port 22 06700 0 0 allow ip from any to any proto tcp src-ip 66.66.66.66 dst-port 22 --- snip ---- I am typing the command "/sbin/ipfw -q delete pass proto tcp src-ip 66.66.66.66 dst-port 22" but both lines remain. What am I doing wrong? Cheers, Noah From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:16:24 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 045F316A417 for ; Fri, 28 Dec 2007 00:16:24 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.freebsd.org (Postfix) with ESMTP id A679813C4EF for ; Fri, 28 Dec 2007 00:16:23 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from localhost (localhost [127.0.0.1]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBS0GLBq037484; Thu, 27 Dec 2007 18:16:21 -0600 (CST) (envelope-from kdk@daleco.biz) X-Virus-Scanned: amavisd-new at daleco.biz Received: from ezekiel.daleco.biz ([127.0.0.1]) by localhost (ezekiel.daleco.biz [127.0.0.1]) (amavisd-new, port 10024) with LMTP id PJ1hszqljQDE; Thu, 27 Dec 2007 18:16:17 -0600 (CST) Received: from archangel.daleco.biz (dsl.daleco.biz [209.125.108.70]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBS0GDtu037479; Thu, 27 Dec 2007 18:16:14 -0600 (CST) (envelope-from kdk@daleco.biz) Message-ID: <47744048.6020202@daleco.biz> Date: Thu, 27 Dec 2007 18:16:08 -0600 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.2) Gecko/20070418 SeaMonkey/1.1.1 MIME-Version: 1.0 To: Maxim Khitrov References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> In-Reply-To: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:16:24 -0000 Maxim Khitrov wrote: > Hello, > > I'm currently setting up a new firewall for my home network using > FreeBSD 7. The firewall will also act as our local name server > (authoritative for the local domain, and caching for everything else). > One of the things I'd like to do with it is use BIND to block various > undesirable domains (ad servers, malicious sites, etc.). The plan is > to have a separate BIND config file which is included in the main one. Just a question, and I'm not trying to cast doubt on your plan; I'm curious why using BIND for this purpose instead of a proxy, which is a more typical application as I understand it? Again, I'm not trying to convince you otherwise or say that using BIND is a bad idea. It's just that I'm curious because we use Squid for this sort of thing, and I was wondering why BIND instead? Kevin Kinsey > In that file I map all the blocked domains to either the empty zone or > perhaps my local web server that's just serving a blank page for any > request. Haven't decided which way is better yet. This file is updated > periodically (once a week maybe) and BIND is then told to reload the > config. That's the plan as it stands now, eventually I hope to add a > web interface to the system for adding and removing blocked domains. > > My question for you guys is if know any _reliable_ sources for getting > that list of domains in the first place? I currently use the hosts > file on all my machines, which is about 2MB in size and hasn't been > updated in several years. I'll definitely import all of those entries > myself, but it would be good if I could periodically pull an updated > list from somewhere else. The following site has a pretty decent > collection of ad servers, though it's a bit short compared to what I > already have: http://pgl.yoyo.org/adservers/. It even provides the > list in a BIND format, meaning that I don't need to do any additional > processing with it. Just fetch the page and reload BIND. This, > however, is not one of my requirements. I'm perfectly happy getting > just a list of the domains (in any format), and then processing them > into a BIND config file myself. Just need good sources. What are your > recommendations? > > - Max -- QOTD: A child of 5 could understand this! Fetch me a child of 5. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:21:19 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5519216A421 for ; Fri, 28 Dec 2007 00:21:19 +0000 (UTC) (envelope-from sdavtaker@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.245]) by mx1.freebsd.org (Postfix) with ESMTP id 06E4F13C457 for ; Fri, 28 Dec 2007 00:21:18 +0000 (UTC) (envelope-from sdavtaker@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so650690anc.13 for ; Thu, 27 Dec 2007 16:21:18 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:user-agent:mime-version:to:subject:content-type:content-transfer-encoding; bh=CrbEfVh28pgVcpQOrFoWXiW44t6POnCEJisG5u5IWdA=; b=uP5v4ukAJKsg72IOGSx1T7KEjwFr+KaQH6N8r/+YA1Unn4OgiWz0hAurMHW9wowZsCf0bA7HHIdIeMQQNu/VsTW3izJ/IXFMCC0gi7WE6g2ocNNcGu6D53h+RhJQEjRoycWDyn3Wn4J9OoKka7B6TbG+vOF4c0AO3wo+IkYwYbQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:content-type:content-transfer-encoding; b=XP4ufXzEbEeLnHKkgxf7ZZ+1ZFSrCWKJHZfQxeqqQ9TCMx0RK6troYNo489zWWahVnkJ9RlAlnrRXDWnlJS1l92UkNnW3oEQ4EIlGeiK5E/ifzZ+1uG52lO4EFeH6fF90RZf3JhtytXXqcKTos6pavTZhG6dFxQKBpZ+jkIaa9s= Received: by 10.100.44.4 with SMTP id r4mr17723687anr.119.1198801277976; Thu, 27 Dec 2007 16:21:17 -0800 (PST) Received: from ?192.168.1.101? ( [190.18.36.119]) by mx.google.com with ESMTPS id m30sm13755351elf.17.2007.12.27.16.21.16 (version=TLSv1/SSLv3 cipher=RC4-MD5); Thu, 27 Dec 2007 16:21:17 -0800 (PST) Message-ID: <47744173.6090103@gmail.com> Date: Thu, 27 Dec 2007 21:21:07 -0300 From: =?ISO-8859-1?Q?Sd=E4vtaker?= User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: mysql port problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:21:19 -0000 Hello, I'd installed the mysql51-server port (actual snapshot, FBSD6.2r) After install I ran the create DBs scripts and tried to run a mysql client locally. Tried to run the mysqld manually and got a Socket error. /temp/mysql.sock is not.... I found the log file didnt log anything, so i started looking at the /var/db/mysql files... All files in /var/db/mysql were in wheel group and root owner, so I did chown -R mysql mysql chgrp -R mysql mysql After that it started working, im using it and can do all my work, but... Is it safe to set all those files to mysql user and mysql group? Why the port create those files with root and wheel if they cant be accessed. I found lots of people trying to find out why mysql says "sock error" after installation. I tried install mysql50-server and it has the same behavior and changing owner and group it is "solved" too. Can someone enlight me? Im running it from rc.conf with mysql_enable="YES" Thanks! Sdav From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:22:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 51C9516A418 for ; Fri, 28 Dec 2007 00:22:31 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.freebsd.org (Postfix) with ESMTP id C0AB813C4F5 for ; Fri, 28 Dec 2007 00:22:30 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from kobe.laptop (ppp1-102.pat.forthnet.gr [213.16.208.102]) (authenticated bits=128) by igloo.linux.gr (8.14.1/8.14.1/Debian-9) with ESMTP id lBS0LwCm005631 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Fri, 28 Dec 2007 02:22:07 +0200 Received: from kobe.laptop (kobe.laptop [127.0.0.1]) by kobe.laptop (8.14.2/8.14.2) with ESMTP id lBS0LvK8047304; Fri, 28 Dec 2007 02:21:57 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Received: (from keramida@localhost) by kobe.laptop (8.14.2/8.14.2/Submit) id lBS0LswF047303; Fri, 28 Dec 2007 02:21:54 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Date: Fri, 28 Dec 2007 02:21:54 +0200 From: Giorgos Keramidas To: Noah Message-ID: <20071228002153.GC47064@kobe.laptop> References: <47743999.3010908@enabled.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <47743999.3010908@enabled.com> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-4.044, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.35, BAYES_00 -2.60) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: removing ipfw rules X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:22:31 -0000 On 2007-12-27 15:47, Noah wrote: > Hi, > > I have two ipfw rules that I want to remove. They are viewable with the > "ipfw show" command > > > --- snip --- > > 06600 0 0 allow ip from any to any proto tcp src-ip > 66.66.66.66 dst-port 22 > 06700 0 0 allow ip from any to any proto tcp src-ip > 66.66.66.66 dst-port 22 > > --- snip ---- > > I am typing the command "/sbin/ipfw -q delete pass proto tcp src-ip > 66.66.66.66 dst-port 22" > > but both lines remain. What am I doing wrong? There are differences between the visible rule: allow ip from any to any proto tcp src-ip 66.66.66.66 dst-port 22 and the one you are trying to delete: pass proto tcp src-ip 66.66.66.66 dst-port 22 Having said that, can you try something simpler, i.e. ipfw -q delete 6600 ipfw -q delete 6700 This should work too, if I remember well enough the ipfw syntax. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:24:40 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0770C16A417 for ; Fri, 28 Dec 2007 00:24:40 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.freebsd.org (Postfix) with ESMTP id A412513C442 for ; Fri, 28 Dec 2007 00:24:39 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from localhost (localhost [127.0.0.1]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBS0OapB037625; Thu, 27 Dec 2007 18:24:36 -0600 (CST) (envelope-from kdk@daleco.biz) X-Virus-Scanned: amavisd-new at daleco.biz Received: from ezekiel.daleco.biz ([127.0.0.1]) by localhost (ezekiel.daleco.biz [127.0.0.1]) (amavisd-new, port 10024) with LMTP id oC-nUc7GmryE; Thu, 27 Dec 2007 18:24:29 -0600 (CST) Received: from archangel.daleco.biz (dsl.daleco.biz [209.125.108.70]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBS0ONu7037620; Thu, 27 Dec 2007 18:24:24 -0600 (CST) (envelope-from kdk@daleco.biz) Message-ID: <47744232.4040209@daleco.biz> Date: Thu, 27 Dec 2007 18:24:18 -0600 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.2) Gecko/20070418 SeaMonkey/1.1.1 MIME-Version: 1.0 To: Terry Sposato References: <001201c848d2$0a899560$1f9cc020$@com> In-Reply-To: <001201c848d2$0a899560$1f9cc020$@com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: 'User Questions' Subject: Re: Kernel Log Messages in Security Output X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:24:40 -0000 Terry Sposato wrote: > Hi, > > Just got the following in my security run output and wondering what exactly > it means: > > +++ /tmp/security.zNWgsW2T Fri Dec 28 03:01:05 2007 > +(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > +(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error > +(da0:umass-sim1:1:0:0): SCSI Status: Check Condition > +(da0:umass-sim1:1:0:0): NOT READY asc:3a,0 > +(da0:umass-sim1:1:0:0): Medium not present > +(da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 > +(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > +(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error > +(da0:umass-sim1:1:0:0): SCSI Status: Check Condition > +(da0:umass-sim1:1:0:0): NOT READY asc:3a,0 > +(da0:umass-sim1:1:0:0): Medium not present > +(da0:umass-sim1:1:0:0): Unretryable error Opened disk da0 -> 6 > > If anyone can shed some light on it or point me to some documentation that > would be great. > As far as I can tell the machine is running fine. There is hardware raid > setup with mirroring on this box. > There are no errors on the physical machine itself. > > Regards, > > Terry Does this error also occur at bootup? "Medium not present" seems to indicate something like "I'm trying a CDROM drive but it's empty", or, since this is apparently umass(4) talking, "there's this unformatted thumb drive stuck in my USB slot", or something like that. What, if anything, *is* plugged into the USB ports? What does `camcontrol devlist -v" say? Could maybe also be some unsupported device that *looks* like a umass(4)device, too, but I'm not guru enough to guess much about that. It's just that the error looks a lot like what I described above. Maybe FBSD senses something interesting with the HW Raid? HTH, if grasping at straws is your hobby, Kevin Kinsey -- If your mother knew what you're doing, she'd probably hang her head and cry. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 00:34:42 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3635C16A41B for ; Fri, 28 Dec 2007 00:34:42 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from typhoon.enabled.com (typhoon.enabled.com [216.218.220.21]) by mx1.freebsd.org (Postfix) with ESMTP id 1CDD813C457 for ; Fri, 28 Dec 2007 00:34:42 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from Macintosh-5.local (natint3.juniper.net [66.129.224.36]) (authenticated bits=0) by typhoon.enabled.com (8.14.1/8.14.1) with ESMTP id lBS0YY3O085119 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 27 Dec 2007 16:34:35 -0800 (PST) (envelope-from admin2@enabled.com) Message-ID: <4774448E.5050704@enabled.com> Date: Thu, 27 Dec 2007 16:34:22 -0800 From: Noah User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Giorgos Keramidas References: <47743999.3010908@enabled.com> <20071228002153.GC47064@kobe.laptop> In-Reply-To: <20071228002153.GC47064@kobe.laptop> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: removing ipfw rules X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 00:34:42 -0000 thanks for the response. I was Looking for awk to do some of the parsing like this: /sbin/ipfw list | grep '%IP%' | awk '{ print "ipfw -q delete " $1 }' | sh cheers, Noah From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 01:11:34 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 24A4916A417 for ; Fri, 28 Dec 2007 01:11:34 +0000 (UTC) (envelope-from kline@tao2.thought.org) Received: from tao2.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.freebsd.org (Postfix) with ESMTP id 0C5CD13C467 for ; Fri, 28 Dec 2007 01:11:17 +0000 (UTC) (envelope-from kline@tao2.thought.org) Received: from tao2.thought.org (localhost [127.0.0.1]) by tao2.thought.org (8.13.8/8.13.1) with ESMTP id lBS0lBeS088826; Thu, 27 Dec 2007 16:47:11 -0800 (PST) (envelope-from kline@tao2.thought.org) Received: (from kline@localhost) by tao2.thought.org (8.13.8/8.13.1/Submit) id lBS0l5mM088516; Thu, 27 Dec 2007 16:47:05 -0800 (PST) (envelope-from kline) From: Gary Kline Message-Id: <200712280047.lBS0l5mM088516@tao2.thought.org> To: perryh@pluto.rain.com Date: Thu, 27 Dec 2007 16:47:04 -0800 (PST) In-Reply-To: <477425a8.NN1TBR+ar8VpyWTQ%perryh@pluto.rain.com> Organization: <> thought.org: pvblic service Unix since 1986... <> Of_Interest: Observing 16 years of service to the Unix community X-Mailer: ELM [version 2.5 PL8] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: keramida@ceid.upatras.gr, kline@tao.thought.org, freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 01:11:34 -0000 According to perryh@pluto.rain.com: > > Giorgos Keramidas wrote: > > > On 2007-12-27 11:02, Gary Kline wrote: > > > I've been trtryinng to rebuild everything on tao to get my i810 > > > graphics working. Somehow, mutt bbroke. It seems to break with > > > something undefined in perl5.8. > > > > > > Anybody know what this is: > > > Undefined symbol "__sbmaskrune" ? > > > > That's odd. The mutt-devel port (which I am using to type > > and post this message) does not seem to depend on Perl: > > Last time I recall seeing a symbol name ending in "rune" it > had something to do with handling charsets and/or locales. I saw that "rune" ending. perl5.8 wasn't it; more of the error output pointed at one of the autoconfig's v 19 in devel. I had troubles there, so wound up swapping "host foo" { .... }; in my DNS server to reroute mail to my new ``tao''. Some troubles with dhcp, but hopefully nothing thaat serious. Am upgrading my older tao.... > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > -- Gary Kline kline@thought.org www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 01:12:16 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8895F16A41A for ; Fri, 28 Dec 2007 01:12:16 +0000 (UTC) (envelope-from kline@tao2.thought.org) Received: from tao2.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.freebsd.org (Postfix) with ESMTP id 69C5F13C45B for ; Fri, 28 Dec 2007 01:12:10 +0000 (UTC) (envelope-from kline@tao2.thought.org) Received: from tao2.thought.org (localhost [127.0.0.1]) by tao2.thought.org (8.13.8/8.13.1) with ESMTP id lBS0uGLj018733; Thu, 27 Dec 2007 16:56:16 -0800 (PST) (envelope-from kline@tao2.thought.org) Received: (from kline@localhost) by tao2.thought.org (8.13.8/8.13.1/Submit) id lBS0uEOC018731; Thu, 27 Dec 2007 16:56:14 -0800 (PST) (envelope-from kline) From: Gary Kline Message-Id: <200712280056.lBS0uEOC018731@tao2.thought.org> To: m.seaman@infracaninophile.co.uk (Matthew Seaman) Date: Thu, 27 Dec 2007 16:56:14 -0800 (PST) In-Reply-To: <47741D43.4010603@infracaninophile.co.uk> Organization: <> thought.org: pvblic service Unix since 1986... <> Of_Interest: Observing 16 years of service to the Unix community X-Mailer: ELM [version 2.5 PL8] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Giorgos Keramidas , Gary Kline , freebsd-questions@freebsd.org Subject: Re: mutt?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 01:12:16 -0000 According to Matthew Seaman: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Giorgos Keramidas wrote: > > On 2007-12-27 11:02, Gary Kline wrote: > >> I've been trtryinng to rebuild everything on tao to get my i810 > >> graphics working. Somehow, mutt bbroke. It seems to break with > >> something undefined in perl5.8. > >> > >> Anybody know what this is: > >> Undefined symbol "__sbmaskrune" ? > > > > That's odd. The mutt-devel port (which I am using to type and post this > > message) does not seem to depend on Perl: > > > > % $ pkg_info -r mutt\* > > % Information for mutt-devel-... > > % > > % Depends on: > > % Dependency: ispell-3.2.06_18 > > % Dependency: mime-support-3.39.1 > > % Dependency: libiconv-1.11_1 > > % Dependency: gettext-0.16.1_3 > > % > > % $ > > This is caused by a change to various ctype functions to do with > improved UTF8 support recently, which inadvertently broke ABI > compatability on RELENG_6. The change has since been reverted, but > it seems that you were unlucky enough to install or upgrade some > software during the month or so that it was in place, so that it > is referring to symbols that do not exist in libc.so. > > Perl is just one of the places where __sbmaskrune can show up. > There's been quite a lot of discussion of it on various lists > recently: > > http://www.google.co.uk/search?hl=en&q=site%3Alists.freebsd.org+__sbmaskrune&btnG=Google+Search&meta= > > This, precisely, is the commit message where the ABI breakage you've > seen was created: > > http://lists.freebsd.org/pipermail/cvs-src/2007-October/082836.html > > and here is where it was fixed: > > http://lists.freebsd.org/pipermail/cvs-src/2007-November/084046.html > > To sort out your system, basically make sure you're running a RELENG_6 > version from after the fix was committed, and then I'm afraid you've > just got to reinstall any software that shows the symptoms. Anything > installed before the original commit that broke things will be fine -- > it's just software that was recompiled using a RELENG_6 system from > between 24 October and 20 November. > > It's only RELENG_6 that was affected -- the change went into > RELENG_7 (and HEAD) where ABI changes are permitted with the new major > version number, but RELENG_6_2, RELENG_6_3 and other release branches > never had this patch applied. > > Cheers, > > Matthew > Thanks lots, Matthew. I cvsup'd before my rebuild. I'm running 6.2 or later everywhere. Hopefully up rebuilds will straighten things out. gary > - -- > Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard > Flat 3 > PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate > Kent, CT11 9PW > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2.0.4 (FreeBSD) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFHdB1D8Mjk52CukIwRCMNSAJ0XiL1xfFz925+P+WVpmqRmG7AJTgCdGNkG > APZBRHJq66NqxUScOJrjd8k= > =JqqZ > -----END PGP SIGNATURE----- > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > -- Gary Kline kline@thought.org www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 02:00:42 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4AC8C16A417 for ; Fri, 28 Dec 2007 02:00:42 +0000 (UTC) (envelope-from stapleton.41@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id 3623E13C467 for ; Fri, 28 Dec 2007 02:00:42 +0000 (UTC) (envelope-from stapleton.41@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5453843waf.3 for ; Thu, 27 Dec 2007 18:00:41 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=WT1T0U3rx244C8XLEXxrlyb46Xb2PrAJOiFEOpBtmSQ=; b=q/atWSm8KcmGEugV0RQYSaMm1edO8LZzrSbB1iIpxkRPORWNUM7AIyAtNlkWZ/wqFtFuQCPn57f+bb4uXAZWQEmAPNgh8rPWImD5gP9C/8x7Uxun+N1oYRSwZhIx5JabF8BtSf0/WuEkwUCcli4JzE0fMwE9raQ7PCUmbYXnwz0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=X5k5T4gQYNh3Jg541F8f9bVfIro+6YvRxeClgiIHOVD1/KLoC8g6bQq97wt16ORZpt+rQx+lgULYWkYrQnGpHrwKBZYbY2xGo2xnBeySqflZExQH2sIeUnhgS8+sUr3ICDHpqawfPxt+UK2VOj1CEWDJtn9Kjh5TIreoPYoYEeA= Received: by 10.115.94.1 with SMTP id w1mr6987226wal.85.1198807241589; Thu, 27 Dec 2007 18:00:41 -0800 (PST) Received: by 10.115.60.13 with HTTP; Thu, 27 Dec 2007 18:00:41 -0800 (PST) Message-ID: <80f4f2b20712271800h6692d5dah3ef95e0643eb90e1@mail.gmail.com> Date: Fri, 28 Dec 2007 02:00:41 +0000 From: "Jim Stapleton" To: freebsd-questions@freebsd.org In-Reply-To: <1581622098.20071227205006@bk.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <80f4f2b20712270836x43c08626yc274eeba5c71f7fe@mail.gmail.com> <1581622098.20071227205006@bk.ru> Subject: Re: experience with a Logitech Internet 1500 wireless keyboard/mouse? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 02:00:42 -0000 I expect so (I had a MX Duo before, but both the Keyboard and Mouse are now deceased, and they worked wonderfully - had about 3x the described range), but I had heard good things about MS keyboards/mice on Linux and FreeBSD as well, and I thought I'd give them a try since the Logitech worked maybe 2 years before they died - not nearly long enough in my oppinion. The MS mouse I got won't work in FreeBSD or Linux due to some of the power indicator stuff confusing the lower level drivers in the OS. Since the Logitech has some battery indication stuff, I figured I'd ask. Thanks, -Jim Stapleton On Dec 27, 2007 5:50 PM, Michael Lednev wrote: > Hello, Jim. > > On 27 ??????? 2007 ?., 19:36:32 you wrote: > > JS> It's the cheapest wireless I could find with a ins/del/home/end/pg > JS> up/pg down block on the keyboard, and I wanted to ask if anyone had > JS> experience with one and FreeBSD? I got an MS wireless keyboard/mouse a > JS> while ago, but the mouse doesn't work (no one has gotten one to work > JS> apparantly), and I really need wireless on this system. > > I'm using Logitech Cordless Rechargeable Desktop for about 2 years > with no problems. Probably this one will work too. > > -- > Best regards, > Michael mailto:liettneff@bk.ru > > From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 03:02:56 2007 Return-Path: Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 44E1B16A418 for ; Fri, 28 Dec 2007 03:02:56 +0000 (UTC) (envelope-from kline@ethos.thought.org) Received: from sage.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.freebsd.org (Postfix) with ESMTP id E806513C45B for ; Fri, 28 Dec 2007 03:02:55 +0000 (UTC) (envelope-from kline@ethos.thought.org) Received: from ethos.thought.org (ethos [10.0.0.249]) by sage.thought.org (8.13.8/8.12.10) with ESMTP id lBS2c66L048900 for ; Thu, 27 Dec 2007 18:38:07 -0800 (PST) (envelope-from kline@ethos.thought.org) Received: by ethos.thought.org (Postfix, from userid 1000) id 6D95D12AC476; Thu, 27 Dec 2007 18:38:07 -0800 (PST) Date: Thu, 27 Dec 2007 18:38:07 -0800 From: Gary Kline To: FreeBSD Mailing List Message-ID: <20071228023807.GA2501@thought.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: With 21 of service to the Unix community. User-Agent: Mutt/1.5.11 Cc: Subject: AAARRRGH: network foul-ups. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 03:02:56 -0000 The trouble is that two of my machines report the identical private IP: 10.0.0.250. Previously "tao" was 10.0.0.247 and "tao2" was 10.0.0.250. Today I switched the names in /usr/local/etc/dhcpd.conf, shutdown, and rebooted my mailserver--also my DNS server--and the two other computers. Whenever I reboot my new "tao2" (used to be 10.0.0.247) is reports its IP as 10.0.0.250. Anybody know how I've screw this up?? thanks in advancem gary -- Gary Kline Sr. Systems Admin, Thought Unlimited kline@ethos.thought.org www.thought.org From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 03:18:32 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F001C16A420 for ; Fri, 28 Dec 2007 03:18:32 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: from smtpgate1.pacific.net.sg (smtpgate1.pacific.net.sg [203.120.90.31]) by mx1.freebsd.org (Postfix) with SMTP id 58D7D13C45A for ; Fri, 28 Dec 2007 03:18:31 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: (qmail 16865 invoked from network); 28 Dec 2007 03:18:30 -0000 Received: from adsl221.dyn112.pacific.net.sg (HELO P2120.somewherefaraway.com) (oceanare@210.24.112.221) by smtpgate1.pacific.net.sg with ESMTPA; 28 Dec 2007 03:18:26 -0000 Message-ID: <47746AFA.5080008@pacific.net.sg> Date: Fri, 28 Dec 2007 11:18:18 +0800 From: Erich Dollansky User-Agent: Thunderbird 2.0.0.6 (X11/20070826) MIME-Version: 1.0 To: Maxim Khitrov References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> In-Reply-To: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 03:18:33 -0000 Hi, I use hosts to block unwanted content but on per machine base. I use currentlu this as a starting point and add private preferences to hosts. http://www.mvps.org/winhelp2002/hosts.txt Has bind a visible advantage in the response time? Erich Maxim Khitrov wrote: > Hello, > > I'm currently setting up a new firewall for my home network using > FreeBSD 7. The firewall will also act as our local name server > (authoritative for the local domain, and caching for everything else). > One of the things I'd like to do with it is use BIND to block various > undesirable domains (ad servers, malicious sites, etc.). The plan is > to have a separate BIND config file which is included in the main one. > In that file I map all the blocked domains to either the empty zone or > perhaps my local web server that's just serving a blank page for any > request. Haven't decided which way is better yet. This file is updated > periodically (once a week maybe) and BIND is then told to reload the > config. That's the plan as it stands now, eventually I hope to add a > web interface to the system for adding and removing blocked domains. > > My question for you guys is if know any _reliable_ sources for getting > that list of domains in the first place? I currently use the hosts > file on all my machines, which is about 2MB in size and hasn't been > updated in several years. I'll definitely import all of those entries > myself, but it would be good if I could periodically pull an updated > list from somewhere else. The following site has a pretty decent > collection of ad servers, though it's a bit short compared to what I > already have: http://pgl.yoyo.org/adservers/. It even provides the > list in a BIND format, meaning that I don't need to do any additional > processing with it. Just fetch the page and reload BIND. This, > however, is not one of my requirements. I'm perfectly happy getting > just a list of the domains (in any format), and then processing them > into a BIND config file myself. Just need good sources. What are your > recommendations? > > - Max > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 03:24:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CFEC416A419 for ; Fri, 28 Dec 2007 03:24:29 +0000 (UTC) (envelope-from bseklecki@collaborativefusion.com) Received: from mx00.pub.collaborativefusion.com (mx00.pub.collaborativefusion.com [206.210.89.199]) by mx1.freebsd.org (Postfix) with ESMTP id 8944E13C469 for ; Fri, 28 Dec 2007 03:24:29 +0000 (UTC) (envelope-from bseklecki@collaborativefusion.com) Received: from [172.16.156.151] (pool-71-245-176-21.pitbpa.fios.verizon.net [71.245.176.21]) (AUTH: LOGIN seklecki, TLS: TLSv1/SSLv3,256bits,AES256-SHA) by wingspan with esmtp; Thu, 27 Dec 2007 22:13:46 -0500 id 00056412.477469EA.000064BD From: "Brian A. Seklecki (Mobile)" To: Gary Kline In-Reply-To: <20071228023807.GA2501@thought.org> References: <20071228023807.GA2501@thought.org> Organization: Collaborative Fusion, Inc. Date: Thu, 27 Dec 2007 22:13:42 -0500 Message-Id: <1198811623.3375.1.camel@new-host> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit X-Mailer: Evolution 2.12.2 (2.12.2-2.fc8) Cc: FreeBSD Mailing List Subject: Re: AAARRRGH: network foul-ups. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: bseklecki@collaborativefusion.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 03:24:29 -0000 On Thu, 2007-12-27 at 18:38 -0800, Gary Kline wrote: > The trouble is that two of my machines report the identical > private IP: 10.0.0.250. Previously "tao" was 10.0.0.247 and Be sure to flush old entries from: /var/lib/dhclient/dhclient.leases on DHCP Clients ~BAS > "tao2" was 10.0.0.250. Today I switched the names in > /usr/local/etc/dhcpd.conf, shutdown, and rebooted my > mailserver--also my DNS server--and the two other computers. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 03:27:29 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CDD1616A418 for ; Fri, 28 Dec 2007 03:27:29 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.freebsd.org (Postfix) with ESMTP id 1096E13C461 for ; Fri, 28 Dec 2007 03:27:28 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id lBS3RQOj096696 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 28 Dec 2007 10:27:27 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.6/8.12.11) id lBS3RQi2021404; Fri, 28 Dec 2007 10:27:26 +0700 (ICT) Date: Fri, 28 Dec 2007 10:27:26 +0700 (ICT) Message-Id: <200712280327.lBS3RQi2021404@banyan.cs.ait.ac.th> From: Olivier Nicole To: oceanare@pacific.net.sg In-reply-to: <47746AFA.5080008@pacific.net.sg> (message from Erich Dollansky on Fri, 28 Dec 2007 11:18:18 +0800) References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47746AFA.5080008@pacific.net.sg> X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Cc: mkhitrov@gmail.com, freebsd-questions@freebsd.org Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 03:27:29 -0000 > Has bind a visible advantage in the response time? Maybe not in response time, but certainly in centralisation: you only maintain one DNS instead of every machine. Olivier From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 03:37:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9193A16A419 for ; Fri, 28 Dec 2007 03:37:31 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: from outbound-mail-30.bluehost.com (outbound-mail-30.bluehost.com [69.89.17.212]) by mx1.freebsd.org (Postfix) with SMTP id 793E013C46B for ; Fri, 28 Dec 2007 03:37:31 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: (qmail 2887 invoked by uid 0); 28 Dec 2007 03:37:31 -0000 Received: from unknown (HELO box183.bluehost.com) (69.89.25.183) by mailproxy2.bluehost.com with SMTP; 28 Dec 2007 03:37:31 -0000 Received: from c-24-9-123-251.hsd1.co.comcast.net ([24.9.123.251] helo=demeter.hydra) by box183.bluehost.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.68) (envelope-from ) id 1J862L-0006Qm-KH for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 20:37:29 -0700 Received: from demeter.hydra (localhost [127.0.0.1]) by demeter.hydra (8.13.6/8.13.6) with ESMTP id lBS3bSL0089752 for ; Thu, 27 Dec 2007 20:37:28 -0700 (MST) (envelope-from perrin@apotheon.com) Received: (from ren@localhost) by demeter.hydra (8.13.6/8.13.6/Submit) id lBS3bRks089751 for freebsd-questions@freebsd.org; Thu, 27 Dec 2007 20:37:27 -0700 (MST) (envelope-from perrin@apotheon.com) X-Authentication-Warning: demeter.hydra: ren set sender to perrin@apotheon.com using -f Date: Thu, 27 Dec 2007 20:37:27 -0700 From: Chad Perrin To: freebsd-questions@freebsd.org Message-ID: <20071228033727.GA89701@demeter.hydra> Mail-Followup-To: freebsd-questions@freebsd.org References: <54129.66383.qm@web54201.mail.re2.yahoo.com> <44fxxxphbh.fsf@be-well.ilk.org> <20071220195027.GB54762@demeter.hydra> <4463yksxaf.fsf@Lowell-Desk.lan> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4463yksxaf.fsf@Lowell-Desk.lan> User-Agent: Mutt/1.4.2.3i X-Identified-User: {737:box183.bluehost.com:apotheon:apotheon.net} {sentby:bopbeforesmtp 24.9.123.251 authed with apotheon.com} Subject: Re: NIS Linux - Ubuntu X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 03:37:31 -0000 On Wed, Dec 26, 2007 at 09:10:00PM -0500, Lowell Gilbert wrote: > Chad Perrin writes: > > > > The behavior with an asterisk instead of an X is pretty worrisome, > > however, and is not strictly Ubuntu's fault. Security of a server should > > not rely on the good will and competence of the client developers. > > I agree with the latter sentence, but not the former. > When using NFS (without Kerberos), it is built into the protocol that > the server trusts the client on the UID/GID. > That is a good reason not to use NFS in an untrusted environment, but > there really isn't anything FreeBSD can do about it. I'm not clear on how that makes it Ubuntu's fault -- which seems to be what you're saying, since you disagreed with the sentence in which I stated it is not strictly Ubuntu's fault. -- CCD CopyWrite Chad Perrin [ http://ccd.apotheon.org ] John Kenneth Galbraith: "If all else fails, immortality can always be assured through spectacular error." From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 04:24:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D4F2216A41B for ; Fri, 28 Dec 2007 04:24:28 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: from smtpgate2.pacific.net.sg (smtpgate2.pacific.net.sg [203.120.90.32]) by mx1.freebsd.org (Postfix) with SMTP id 1710013C442 for ; Fri, 28 Dec 2007 04:24:27 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: (qmail 15651 invoked from network); 28 Dec 2007 04:24:25 -0000 Received: from adsl221.dyn112.pacific.net.sg (HELO P2120.somewherefaraway.com) (oceanare@210.24.112.221) by smtpgate2.pacific.net.sg with ESMTPA; 28 Dec 2007 04:24:25 -0000 Message-ID: <47747A72.3070109@pacific.net.sg> Date: Fri, 28 Dec 2007 12:24:18 +0800 From: Erich Dollansky User-Agent: Thunderbird 2.0.0.6 (X11/20070826) MIME-Version: 1.0 To: Olivier Nicole References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47746AFA.5080008@pacific.net.sg> <200712280327.lBS3RQi2021404@banyan.cs.ait.ac.th> In-Reply-To: <200712280327.lBS3RQi2021404@banyan.cs.ait.ac.th> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: mkhitrov@gmail.com, freebsd-questions@freebsd.org Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 04:24:28 -0000 Hi, Olivier Nicole wrote: >> Has bind a visible advantage in the response time? > > Maybe not in response time, but certainly in centralisation: you only > maintain one DNS instead of every machine. > this is obvious to me too. I would not like to use bind for filtering except in larger organisations. Erich From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 04:37:01 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CC05416A4EC for ; Fri, 28 Dec 2007 04:37:01 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.187]) by mx1.freebsd.org (Postfix) with ESMTP id A46A513C4EB for ; Fri, 28 Dec 2007 04:37:01 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so3715749rvb.43 for ; Thu, 27 Dec 2007 20:37:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=Qj7xnCAZ7Suu2G/KTPwrFmerIv22zpq/lQZB75no95A=; b=FdjiYPcQ6UK/LJy4EvBLi86vDZCP2FZafthrNs+nQ9ufL7OmtpyDStOcoi5kfzRH+Sd5R2Euj1GswdOzGiqDgcJU9Iv8Y/uVaPplF2S6PxOH9uIYfrqoUe3VCAzSjh6S/F8YqZoXvVeTWDQbNz94aTtoo4r+I8lPzv1/szd8Rqk= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=GCVmWuokXBP0Pc2kIL5QuDr05V8RcfwMZ2CMCiMJVXqstfF1V+jXUnlGusWPkrgmN3P/Dr5CFYRGxO/SI1JVjCB76TZFPExa77zhpgrzPmLOlOgbUe+u8FNL+fPE4JypANdE+YjBV5spu6/Xo6BtxKPn2jJwsXtlCm8w375p6L8= Received: by 10.142.194.1 with SMTP id r1mr453751wff.176.1198816621363; Thu, 27 Dec 2007 20:37:01 -0800 (PST) Received: by 10.142.242.11 with HTTP; Thu, 27 Dec 2007 20:37:01 -0800 (PST) Message-ID: <26ddd1750712272037x594336efndcd136ee2101e3e7@mail.gmail.com> Date: Thu, 27 Dec 2007 23:37:01 -0500 From: "Maxim Khitrov" To: "Kevin Kinsey" In-Reply-To: <47744048.6020202@daleco.biz> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 04:37:01 -0000 On Dec 27, 2007 7:16 PM, Kevin Kinsey wrote: > Maxim Khitrov wrote: > > Hello, > > > > I'm currently setting up a new firewall for my home network using > > FreeBSD 7. The firewall will also act as our local name server > > (authoritative for the local domain, and caching for everything else). > > One of the things I'd like to do with it is use BIND to block various > > undesirable domains (ad servers, malicious sites, etc.). The plan is > > to have a separate BIND config file which is included in the main one. > > Just a question, and I'm not trying to cast doubt on your plan; I'm > curious why using BIND for this purpose instead of a proxy, which is > a more typical application as I understand it? > > Again, I'm not trying to convince you otherwise or say that using > BIND is a bad idea. It's just that I'm curious because we use > Squid for this sort of thing, and I was wondering why BIND instead? > > Kevin Kinsey I also need a local name server for my domain. That's the primary function, and this filtering stuff is just an added bonus. It'll also be nice to bypass the ISP name servers, which haven't been very reliable lately. - Max From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 04:42:25 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E570316A468 for ; Fri, 28 Dec 2007 04:42:25 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.181]) by mx1.freebsd.org (Postfix) with ESMTP id B8C3B13C509 for ; Fri, 28 Dec 2007 04:42:25 +0000 (UTC) (envelope-from mkhitrov@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5540336waf.3 for ; Thu, 27 Dec 2007 20:42:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=L4pdZLnKHQDTRwz+3ODnxZYW5laqYk4yhk8M8IcF97E=; b=MxuaxrMF3ED7gGwnFtqS9wIiGPyl2pJExmpcJ7ZKcsRNBlYV/t/EJczBg2ajuAjmTF+cOiL5pjldO0gMZjmAJVntut0a1LsbU14MG0VvT3jPtfLd5I/Dnx+nm0wKQ/r1JBDQcpvoujbRvaCg3xnhPe4macC4cz1BCHAV8vEKMPg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=i6Bsqwu4dZBb15l/uLB3gaKfDDErPKHdWes2x+tIB7eu4Mf2nXUpo3qvsdWaY1P0uLAibHi6cmiMhxEHX3b/T6uZ3uhKf0PY0gNwVkLYna2kSYbT71r68cJX3FtPEsWDOlyhAJisYWTTpbu5/PXXJsBN/bqehwb7QJBO7Ifg3UU= Received: by 10.142.148.7 with SMTP id v7mr2803174wfd.153.1198816944664; Thu, 27 Dec 2007 20:42:24 -0800 (PST) Received: by 10.142.242.11 with HTTP; Thu, 27 Dec 2007 20:42:24 -0800 (PST) Message-ID: <26ddd1750712272042r34c5da43kcd09dd55be7cd0ad@mail.gmail.com> Date: Thu, 27 Dec 2007 23:42:24 -0500 From: "Maxim Khitrov" To: Schiz0 In-Reply-To: <8d23ec860712271327g6859748evc09d25ab78fdfbf1@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <8d23ec860712271327g6859748evc09d25ab78fdfbf1@mail.gmail.com> Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 04:42:26 -0000 On Dec 27, 2007 4:27 PM, Schiz0 wrote: > > On Dec 27, 2007 3:46 PM, Maxim Khitrov wrote: > > Hello, > > > > I'm currently setting up a new firewall for my home network using > > FreeBSD 7. The firewall will also act as our local name server > > (authoritative for the local domain, and caching for everything else). > > One of the things I'd like to do with it is use BIND to block various > > undesirable domains (ad servers, malicious sites, etc.). The plan is > > to have a separate BIND config file which is included in the main one. > > In that file I map all the blocked domains to either the empty zone or > > perhaps my local web server that's just serving a blank page for any > > request. Haven't decided which way is better yet. This file is updated > > periodically (once a week maybe) and BIND is then told to reload the > > config. That's the plan as it stands now, eventually I hope to add a > > web interface to the system for adding and removing blocked domains. > > > > My question for you guys is if know any _reliable_ sources for getting > > that list of domains in the first place? I currently use the hosts > > file on all my machines, which is about 2MB in size and hasn't been > > updated in several years. I'll definitely import all of those entries > > myself, but it would be good if I could periodically pull an updated > > list from somewhere else. The following site has a pretty decent > > collection of ad servers, though it's a bit short compared to what I > > already have: http://pgl.yoyo.org/adservers/. It even provides the > > list in a BIND format, meaning that I don't need to do any additional > > processing with it. Just fetch the page and reload BIND. This, > > however, is not one of my requirements. I'm perfectly happy getting > > just a list of the domains (in any format), and then processing them > > into a BIND config file myself. Just need good sources. What are your > > recommendations? > > > > - Max > > _______________________________________________ > > You could always try one of those ad-blocking databases for firefox. > The Ad-Block Plus plugin, I was thinking of specifically. > > http://easylist.adblockplus.org > > You could grab that file, then parse it and grab the domains out of it to block. > > I know this isn't what you want, but it may come in useful anyway: > http://www.okean.com/asianspamblocks.html > The problem with adblock is that it uses regular expressions in its file format. No easy way of pulling out all the domains. That IP block info will come in handy when setting up pf, so thanks for that. - Max From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 05:08:48 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 887A816A420 for ; Fri, 28 Dec 2007 05:08:48 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.freebsd.org (Postfix) with ESMTP id AEDC513C46A for ; Fri, 28 Dec 2007 05:08:47 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id lBS58jiU000837 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 28 Dec 2007 12:08:45 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.6/8.12.11) id lBS58jLo022219; Fri, 28 Dec 2007 12:08:45 +0700 (ICT) Date: Fri, 28 Dec 2007 12:08:45 +0700 (ICT) Message-Id: <200712280508.lBS58jLo022219@banyan.cs.ait.ac.th> From: Olivier Nicole To: freebsd-questions@freebsd.org In-reply-to: <26ddd1750712272037x594336efndcd136ee2101e3e7@mail.gmail.com> (mkhitrov@gmail.com) References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> <26ddd1750712272037x594336efndcd136ee2101e3e7@mail.gmail.com> X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 05:08:48 -0000 > Again, I'm not trying to convince you otherwise or say that using > BIND is a bad idea. It's just that I'm curious because we use > Squid for this sort of thing, and I was wondering why BIND instead? I think another issue is that Squid will only filter HTTP/FTP connections, while DNS would allow to filter any type of traffic that would try to go to places with a bad name. Olivier From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 09:17:09 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 64D1216A418 for ; Fri, 28 Dec 2007 09:17:09 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id EDF9A13C442 for ; Fri, 28 Dec 2007 09:17:08 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDESK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id lBS9H5H7015476; Fri, 28 Dec 2007 01:17:08 -0800 (PST) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "FreeBSD Mailing List" Date: Fri, 28 Dec 2007 01:18:10 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 In-Reply-To: <4771FF87.9030908@tundraware.com> Importance: Normal Cc: Subject: RE: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 09:17:09 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Tim Daneliuk > Sent: Tuesday, December 25, 2007 11:15 PM > To: FreeBSD Mailing List > Subject: Re: CDROM Boot Hangs But Only Under 6.x > > > Ted Mittelstaedt wrote: > > > > > > > If your MB is new it should work. Older MB's have problems with > > the "new way" to boot off an optical cd. You can try BIOS/CMOS > > updates from the motherbard mfg if they are available. Sometimes > > even back-flashing to older BIOS fixes it. > > This is a brand new ABIT mobo w/latest bios on board. > > > > >> 3) Reordering/removing memory sticks made no difference. I am running > >> a memory test ATM just to be sure, but so far, the memory > seems fine. > >> > >> 4) No amount of poking around in the BIOS settings seems to > help either. > >> > >> I am starting to suspect the MOBO. If I stick a couple of cards in the > >> two available PCI slots, the system has trouble taking me into the BIOS > >> screen. I have to remove the cards to reliably get into the BIOS > >> settings menu. I wonder if this is one of those situations where there > >> are not enough IRQs to go around. > >> > > > > If it's a new MB the PCI cards are probably too old/slow to work right. > > I thought that even modern PCI busses would fall back to the old > speeds. I've had not trouble with any of my other rather new > mobos, running, say, old Adaptec controllers. > > > > > Another thing to check is if the MB has any overclock settings turned > > on, these will screw up booting, going into BIOS, and some PCI cards. > > Go to BIOS and select "reset to factory settings" which turns off all > > the go-fast stuff. And make sure you confirm the CPU speed in BIOS > > with the actual speed stamped on the CPU. > > I've reset the BIOS to the most conservative mode, no overclocking, etc. > > > > > Sometimes you just got to stick a floppy disk drive on the thing and > > boot from the 4 boot floppies then do an FTP install. I have about > > a dozen servers among the collection I manage that are like this - > > some are even newer ones. > > I would *love* to know just where boot is getting lost. In the case > of your servers, do you see the same symptoms I am seeing: The > kernel loading progress prompt gets painted (most of the time, > sometimes it does not even make it that far) and the booting > seizes up? > No, they won't even load the boot loader. The symptoms your describing are classic for PIO/UDMA negotiation issues. In other words, the connection from the atapi controller to the optical drive is being negotiated by BIOS as UDMA and negotiated by the FreeBSD boot kernel as UDMA but a bug somewhere is causing the bus to corrupt data. The usual fix is to switch to PIO mode. The only problem with this is that you have already swapped optical drives, and I'd assume that at least one of the swaps didn't support UDMA mode (thus forcing PIO mode) you also said you already checked this, and even if it did negotiate UDMA it would be UDMA33 not anything faster that would require the special high speed IDE cables so we can probably rule out a crap CDROM cable. Lastly, the default on the ata driver is supposed to be PIO mode anyway for optical drives. Ted From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 09:33:14 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E2B316A417 for ; Fri, 28 Dec 2007 09:33:14 +0000 (UTC) (envelope-from maxsec@gmail.com) Received: from hs-out-2122.google.com (hs-out-0708.google.com [64.233.178.251]) by mx1.freebsd.org (Postfix) with ESMTP id D243013C45B for ; Fri, 28 Dec 2007 09:33:13 +0000 (UTC) (envelope-from maxsec@gmail.com) Received: by hs-out-2122.google.com with SMTP id j58so2734625hsj.11 for ; Fri, 28 Dec 2007 01:33:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; bh=BI/Xvxlj2WoZlYuBBy7RWw4hnpWXOyFCnxYb2CoD4Yw=; b=cZVf7+og8uGqP/3NqySmrjNrBYYIq1bfo0wyd48FwFLnXMMq8GejjOAL4vxcg4p+UQWSKp652vMlSkgq7Got26k3qUO4VGWnqt8urLzo8NCuOaOTrTukzRPI1pjcaBdHiMhoifdw49FoiTPWoFrZ/ERSVdxv542g1HjWRnJLT9E= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=Cq2AnLd1rTEXlmkjBo8jVH5iriJ43nVlohJ60OAhN9kEyKSizN4uRLlJjyX8CUWf0a7BBuZMnFo67CeDVjrW18N7e7QdQ1LWc9IOPqMjIbETB6aFEJpV5bkN5sVFnsmgEPe8PoKjduEZGLy3q/9V3gln2Bv229qtEAJwu0XFYV4= Received: by 10.150.96.10 with SMTP id t10mr2473310ybb.87.1198832790007; Fri, 28 Dec 2007 01:06:30 -0800 (PST) Received: by 10.150.190.10 with HTTP; Fri, 28 Dec 2007 01:06:29 -0800 (PST) Message-ID: <72cf361e0712280106x4fd5c94bq4b951c90e65d8390@mail.gmail.com> Date: Fri, 28 Dec 2007 09:06:29 +0000 From: "Martin Hepworth" To: "Grant Peel" In-Reply-To: <003901c848a6$32015be0$6501a8c0@GRANT> MIME-Version: 1.0 References: <003901c848a6$32015be0$6501a8c0@GRANT> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Hosting Server Load X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 09:33:14 -0000 Very much depends. Load ave is a measure of the number of processes waiting for resource (CPU, Network, disk etc). Ie a rough measure of how 'busy' the server is. I've seem modern kit with load averages of over 30 with no problems with responsiveness at all. It's all down to what the processes are actually doing rather than how 'busy' the machine is. -- martin On Dec 27, 2007 4:33 PM, Grant Peel wrote: > Hi all, > > Just wondering what kind of load most hosters consider reasonable. > > (1 min, 5 min, and 15 min average loads). > > -Grant > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 11:17:03 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3324F16A41A for ; Fri, 28 Dec 2007 11:17:03 +0000 (UTC) (envelope-from usleepless@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.185]) by mx1.freebsd.org (Postfix) with ESMTP id 0445C13C4D1 for ; Fri, 28 Dec 2007 11:17:02 +0000 (UTC) (envelope-from usleepless@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so3838370rvb.43 for ; Fri, 28 Dec 2007 03:17:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=p4zBpvJCxjxN+MiekruiL98vOm3vUY9NZsOLRxFXhGI=; b=XK05dJr6V0dYMcgGAuCJX5zB7bGsXASSD/QqfMXDnoHGMmrEIPkfpExj+4bUNKq00HIOEgl7v3QFO1q8cRt7cuqrU6YEEz6lVwAmQ7J18ZwVjnFxnyklaGoGR+3PV7e2bzCh73jEJAvkBTKCyCRR/Mt0mkUwNGzztJkd0vAZdTc= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=bI9USJEbfqnbxYrJaJNKvPeXoDyr6ojsrVV3X29a9jCeXdyRVQK88Zaglr8nSPA1QQ64pdQKNUOnX2i8p4nHQGYxR5z8zHy2o7jfnHYo5AiFD893uR0ePZX56H/yqzJHhehKYsNyYUJXmwEFXG9c5KNf6Y/EeFODj51vfYPKrjs= Received: by 10.142.78.10 with SMTP id a10mr2892489wfb.37.1198840622127; Fri, 28 Dec 2007 03:17:02 -0800 (PST) Received: by 10.142.125.15 with HTTP; Fri, 28 Dec 2007 03:17:02 -0800 (PST) Message-ID: Date: Fri, 28 Dec 2007 12:17:02 +0100 From: usleepless@gmail.com To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Cc: Subject: Ekiga runs but hangs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 11:17:03 -0000 Hello All, is anyone using ekiga? ekiga runs and connects to 500@ekiga.net ( test number ). but when i hang up, or change volume using the ekiga-controls, the UI freezes. #FreeBSD host 7.0-BETA2 FreeBSD 7.0-BETA2 #4 i would love to hear succes or failures. regards, usleep From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 11:24:27 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E373F16A41A for ; Fri, 28 Dec 2007 11:24:27 +0000 (UTC) (envelope-from b_oshea@yahoo.com) Received: from web39510.mail.mud.yahoo.com (web39510.mail.mud.yahoo.com [209.191.106.94]) by mx1.freebsd.org (Postfix) with SMTP id AEE7813C4CE for ; Fri, 28 Dec 2007 11:24:27 +0000 (UTC) (envelope-from b_oshea@yahoo.com) Received: (qmail 22094 invoked by uid 60001); 28 Dec 2007 10:57:47 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=dFYTxnEbF6x+PktA3Nq6ANfhTyvNIC0mDAhuu2nn5064SP9KM0LDbm3j03yA4NOvRgl1+qr3wcf1/g9IF/ahqua8eyh3vL+YxUxTn4AqOdb1n7XPH4237OcDtrFx7izq/bWDwng6V3xeOOpHoBFCDtuxZlcuIcSAuF6p/7R2ClM=; X-YMail-OSG: Fm8iCMIVM1ks2dMkrD.RY9Q8y8Alv5WipdfslW3lwfRYdEiDlD0AgO5OBNKnge5a8Z_SGFCsa89x5TxonpUzRal0eULdcMy6XJ.SrBaTlwJykutODSIOX6Rib6_H4w-- Received: from [67.170.228.141] by web39510.mail.mud.yahoo.com via HTTP; Fri, 28 Dec 2007 02:57:47 PST Date: Fri, 28 Dec 2007 02:57:47 -0800 (PST) From: Brian O'Shea To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <276958.21567.qm@web39510.mail.mud.yahoo.com> Subject: buildkernel with INVARIANTS, WITNESS, DEBUG_LOCKS, etc. fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 11:24:28 -0000 Hello FreeBSD developers, Building a FreeBSD 6.2-RELEASE kernel on an Intel Pentium 4 with the following config options causes buildkernel to fail with undefined references to stack_save, stack_zero, and stack_print functions: makeoptions DEBUG=-g options INVARIANTS options INVARIANT_SUPPORT options WITNESS options DEBUG_LOCKS options DEBUG_VFS_LOCKS options DIAGNOSTIC Am I just omitting an option that causes this code to be linked correctly, or alternatively is there a workaround for this? I followed the instructions from the following developers handbook page on debugging deadlocks: http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug-deadlocks.html Below I have included as much information as I can think of that would be relevant to this problem. Please let me know if you would like me to provide any more information. Regards, -brian Output from uname -a : FreeBSD apsara.hsd1.ca.comcast.net. 6.2-RELEASE FreeBSD 6.2-RELEASE #1: Fri Nov 9 00:08:34 PST 2007 root@apsara.hsd1.ca.comcast.net.:/usr/obj/usr/src/sys/APSARA i386 CPU information from dmesg: CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1796.95-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff Relevant (non-comment) diffs between a kernel config that bulids (APSARA) and one that doesn't (APSARA-DEBUG) included below: 23c22 < ident APSARA --- > ident APSARA-DEBUG 28c27,38 < #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols --- > makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols > # > # The following options have been set in an attempt to track down the > # problem with the snd_cmi driver, which causes the system to hang if > # it is used to play audio content: > # > options INVARIANTS > options INVARIANT_SUPPORT > options WITNESS > options DEBUG_LOCKS > options DEBUG_VFS_LOCKS > options DIAGNOSTIC Relevant error messages from make buildkernel (with KERNCONF set to APSARA-DEBUG) included below: linking kernel.debug kern_lock.o(.text+0x15d): In function `lockmgr': /usr/src/sys/kern/kern_lock.c:176: undefined reference to `stack_save' kern_lock.o(.text+0x26c):/usr/src/sys/kern/kern_lock.c:223: undefined reference to `stack_save' kern_lock.o(.text+0x4c4):/usr/src/sys/kern/kern_lock.c:306: undefined reference to `stack_save' kern_lock.o(.text+0x5f9):/usr/src/sys/kern/kern_lock.c:365: undefined reference to `stack_save' kern_lock.o(.text+0x737):/usr/src/sys/kern/kern_lock.c:410: undefined reference to `stack_save' kern_lock.o(.text+0x95d): In function `lockinit': /usr/src/sys/kern/kern_lock.c:504: undefined reference to `stack_zero' kern_lock.o(.text+0xae3): In function `lockmgr_printinfo': /usr/src/sys/kern/kern_lock.c:596: undefined reference to `stack_print' *** Error code 1 Stop in /usr/obj/usr/src/sys/APSARA-DEBUG. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 11:37:36 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D5C4F16A421 for ; Fri, 28 Dec 2007 11:37:36 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from app03.fccn.pt (app02.fccn.pt [193.137.198.37]) by mx1.freebsd.org (Postfix) with ESMTP id 4E51D13C457 for ; Fri, 28 Dec 2007 11:37:35 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from mx.anubis.local (ste [10.1.2.2]) by ste.anubis.internal (Postfix) with ESMTP id 9729D19FC4A; Fri, 28 Dec 2007 11:37:30 +0000 (WET) Received: from janus (janus.corp.fccn.pt [193.136.44.31]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (No client certificate requested) by mx.anubis.local (Postfix) with ESMTP id 812521B4450; Fri, 28 Dec 2007 11:37:30 +0000 (WET) From: =?iso-8859-1?Q?Nuno_Gon=E7alves?= To: "'Aryeh M. Friedman'" References: <00fe01c84884$93ba1d30$1f2c88c1@corp.fccn.pt> <4773AAD9.806@gmail.com> Date: Fri, 28 Dec 2007 11:37:28 -0000 Message-ID: <016401c84946$07795670$1f2c88c1@corp.fccn.pt> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Office Outlook 11 Thread-index: AchIjctkkWpcfHuwRbaQ49abIrc9ywAt400g In-Reply-To: <4773AAD9.806@gmail.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 X-Warning-Anubis: User opted out of Anti-Virus checks X-Warning-Anubis: User opted out of Anti-Spam checks X-Content-Checker: AnubisNetworks MPS Cc: freebsd-questions@freebsd.org Subject: RE: Changing boot partition ACCOMPLISHED, now INIT problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 11:37:37 -0000 Hi all, Thanks on all your hints. I accomplished booting to another partition = with a backup from the machine that was all wrecked. It was a little tricky. I installed a minimum FreeBSD and created a second slice to restore the other FreeBSD SO and make it bootable. Then I created the filesystem, mounted it and restored the backup to that partition. Afterwards I changed the FSTAB file to reflect the new reality (the partitions are now different) and did a reboot! And voil=E1, when I = pressed F2 key on boot manager It started to boot the FreeBSD of the wrecked = machine :) Still after probing all the hardware (CDROM, Ethernet boards fxp0, etc) = It showed me the following message: 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... -----Original Message----- From: Aryeh M. Friedman [mailto:aryeh.friedman@gmail.com]=20 Sent: quinta-feira, 27 de Dezembro de 2007 13:39 To: Nuno Gon=E7alves Cc: freebsd-questions@freebsd.org Subject: Re: Changing boot partition -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nuno Gon=E7alves wrote: > Hi all, > >=20 > > I Have a FreeBSD booting ok. It?s FSTAB is like this: > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > /dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2d /backup ufs rw > >=20 > > When I boot the machine the boot manager shows me F1 and F2 to boot = for. > > F1 brings me /dev/ad1s1a OK > > Still I want the machine to boot to /dev/ad1s2d > > This partition has a backup from another FreeBSD which I want to boot. > >=20 > > To accomplish this, I need only to change FSTAB ? > > What changes should I do ? changing /dev/ad1s2d to /dev/ad1s2a ? I = read that > a means boot root partition > >=20 > > I tried to change FSTAB to > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > #/dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2a /backup ufs rw > >=20 > > And it hanged when I pressed F1 (could not mount the root partition :P = ) > >=20 > > Could you guys give any hint ? > > Sorry about this questions but I am a newbie to FreeBSD I forget the exact semantics but do a search for "installing freebsd in a usb stick" on google the reason for referring to this site is it shows how to duplicate what sysinstall does from the command line - -- Aryeh M. Friedman FloSoft Systems http://www.flosoft-systems.com Developer, not business, friendly -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHc6rZzIOMjAek4JIRAoevAJ0WZzlRNgLiZeMzgS7RV2SS96kEBgCfe9PI tsmEoCTLlXPqg/FWYSEcukc=3D =3Doamg -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 11:44:58 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 406C716A41B for ; Fri, 28 Dec 2007 11:44:58 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 83C0213C442; Fri, 28 Dec 2007 11:44:57 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <4774E1B8.1080500@FreeBSD.org> Date: Fri, 28 Dec 2007 12:44:56 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Brian O'Shea References: <276958.21567.qm@web39510.mail.mud.yahoo.com> In-Reply-To: <276958.21567.qm@web39510.mail.mud.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: buildkernel with INVARIANTS, WITNESS, DEBUG_LOCKS, etc. fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 11:44:58 -0000 Brian O'Shea wrote: > Hello FreeBSD developers, > > Building a FreeBSD 6.2-RELEASE kernel on an Intel Pentium 4 with the > following config options causes buildkernel to fail with undefined > references to stack_save, stack_zero, and stack_print functions: > > makeoptions DEBUG=-g > options INVARIANTS > options INVARIANT_SUPPORT > options WITNESS > options DEBUG_LOCKS > options DEBUG_VFS_LOCKS > options DIAGNOSTIC > > Am I just omitting an option that causes this code to be linked > correctly, or alternatively is there a workaround for this? I followed > the instructions from the following developers handbook page on > debugging deadlocks: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug-deadlocks.html > > Below I have included as much information as I can think of that would > be relevant to this problem. Please let me know if you would like me to > provide any more information. > > Regards, > -brian > > > Output from uname -a : > FreeBSD apsara.hsd1.ca.comcast.net. 6.2-RELEASE FreeBSD 6.2-RELEASE #1: Fri Nov > 9 00:08:34 PST 2007 > root@apsara.hsd1.ca.comcast.net.:/usr/obj/usr/src/sys/APSARA i386 > > CPU information from dmesg: > > CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1796.95-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 > > Features=0x3febfbff MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> > > Relevant (non-comment) diffs between a kernel config that bulids > (APSARA) and one that doesn't (APSARA-DEBUG) included below: > > 23c22 > < ident APSARA > --- >> ident APSARA-DEBUG > 28c27,38 > < #makeoptions DEBUG=-g # Build kernel with gdb(1) debug > symbols > --- >> makeoptions DEBUG=-g # Build kernel with gdb(1) debug > symbols >> # >> # The following options have been set in an attempt to track down the >> # problem with the snd_cmi driver, which causes the system to hang if >> # it is used to play audio content: >> # >> options INVARIANTS >> options INVARIANT_SUPPORT >> options WITNESS >> options DEBUG_LOCKS >> options DEBUG_VFS_LOCKS >> options DIAGNOSTIC > > Relevant error messages from make buildkernel (with KERNCONF set to > APSARA-DEBUG) included below: > > linking kernel.debug > kern_lock.o(.text+0x15d): In function `lockmgr': > /usr/src/sys/kern/kern_lock.c:176: undefined reference to `stack_save' > kern_lock.o(.text+0x26c):/usr/src/sys/kern/kern_lock.c:223: undefined reference > to `stack_save' > kern_lock.o(.text+0x4c4):/usr/src/sys/kern/kern_lock.c:306: undefined reference > to `stack_save' > kern_lock.o(.text+0x5f9):/usr/src/sys/kern/kern_lock.c:365: undefined reference > to `stack_save' > kern_lock.o(.text+0x737):/usr/src/sys/kern/kern_lock.c:410: undefined reference > to `stack_save' > kern_lock.o(.text+0x95d): In function `lockinit': > /usr/src/sys/kern/kern_lock.c:504: undefined reference to `stack_zero' > kern_lock.o(.text+0xae3): In function `lockmgr_printinfo': > /usr/src/sys/kern/kern_lock.c:596: undefined reference to `stack_print' > *** Error code 1 I think you also need DDB. This is a minor bug which you could send-pr about if you like. Kris From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 11:55:25 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B1CF816A418 for ; Fri, 28 Dec 2007 11:55:25 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from app03.fccn.pt (app02.fccn.pt [193.137.198.37]) by mx1.freebsd.org (Postfix) with ESMTP id 2A2C613C455 for ; Fri, 28 Dec 2007 11:55:24 +0000 (UTC) (envelope-from nuno@fccn.pt) Received: from mx.anubis.local (ste [10.1.2.2]) by ste.anubis.internal (Postfix) with ESMTP id 4F90119FC4A; Fri, 28 Dec 2007 11:55:23 +0000 (WET) Received: from janus (janus.corp.fccn.pt [193.136.44.31]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (No client certificate requested) by mx.anubis.local (Postfix) with ESMTP id 357151B4450; Fri, 28 Dec 2007 11:55:23 +0000 (WET) From: =?iso-8859-1?Q?Nuno_Gon=E7alves?= To: "'Aryeh M. Friedman'" References: <00fe01c84884$93ba1d30$1f2c88c1@corp.fccn.pt> <4773AAD9.806@gmail.com> Date: Fri, 28 Dec 2007 11:55:21 -0000 Message-ID: <000c01c84948$86d61870$1f2c88c1@corp.fccn.pt> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Office Outlook 11 In-Reply-To: <4773AAD9.806@gmail.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 Thread-Index: AchIjctkkWpcfHuwRbaQ49abIrc9ywAuKcAQ X-Warning-Anubis: User opted out of Anti-Virus checks X-Warning-Anubis: User opted out of Anti-Spam checks X-Content-Checker: AnubisNetworks MPS Cc: freebsd-questions@freebsd.org Subject: RE: Changing boot partition - ACCOMPLISHED, now INIT problem :( X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 11:55:25 -0000 Hi all, Thanks on all your hints; it helped me comprehending my problem. I accomplished the restore of a wrecked machine only with a .tar backup = from it. The recipe is a little tricky. I installed a minimum FreeBSD on a new machine, during sysintall I created 2 slices (one ad1s1 to the minimum = SO and swap and another slice ad1s2 to restore the backup) I set the second slice as bootable (option S in FDISK). Then I created the partitions on = the first slice and installed the minimum SO (ad1s1a and ad1s1b for swap). = After booting to it with F1 I created the new file system with newfs and = mounted in rw mode (ad1s2a). Restored the tar backup to it and changed the FSTAB = to the new reality (used the initial swap created on the minimum SO ad1s1b = and the new partition as / ad1s2a ). Rebooted and voila it was booting the = old FreeBSD SO. Still after probing the hardware (CDROM, FXP0, etc ....) It showed me = this repeated error: 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... 23:29:19 init: can't exec getty '/usr/libexec/getty' for port ... ..... .... I though it was something related with the console, so I rebooted to the initial SO with F1, mounted the partition o see /boot and renamed boot.config Did another reboot and booted to F2 but the problem persists. Do you guys have any clue what might this be and how can I solve it? Is = it something related with kernel stuff? I have access to the contents of it if I boot through the minimum SO = (F1)=20 Thanks for helping this newbie Best regards to you all Nuno=20 -----Original Message----- From: Aryeh M. Friedman [mailto:aryeh.friedman@gmail.com]=20 Sent: quinta-feira, 27 de Dezembro de 2007 13:39 To: Nuno Gon=E7alves Cc: freebsd-questions@freebsd.org Subject: Re: Changing boot partition -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nuno Gon=E7alves wrote: > Hi all, > >=20 > > I Have a FreeBSD booting ok. It?s FSTAB is like this: > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > /dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2d /backup ufs rw > >=20 > > When I boot the machine the boot manager shows me F1 and F2 to boot = for. > > F1 brings me /dev/ad1s1a OK > > Still I want the machine to boot to /dev/ad1s2d > > This partition has a backup from another FreeBSD which I want to boot. > >=20 > > To accomplish this, I need only to change FSTAB ? > > What changes should I do ? changing /dev/ad1s2d to /dev/ad1s2a ? I = read that > a means boot root partition > >=20 > > I tried to change FSTAB to > > #Device MountPoint FStype Options > > /dev/ad1s1b none swap sw > > #/dev/ad1s1a / ufs rw > > /dev/acd0 /cdrom cd9660 ro,noauto > > /dev/ad1s2a /backup ufs rw > >=20 > > And it hanged when I pressed F1 (could not mount the root partition :P = ) > >=20 > > Could you guys give any hint ? > > Sorry about this questions but I am a newbie to FreeBSD I forget the exact semantics but do a search for "installing freebsd in a usb stick" on google the reason for referring to this site is it shows how to duplicate what sysinstall does from the command line - -- Aryeh M. Friedman FloSoft Systems http://www.flosoft-systems.com Developer, not business, friendly -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHc6rZzIOMjAek4JIRAoevAJ0WZzlRNgLiZeMzgS7RV2SS96kEBgCfe9PI tsmEoCTLlXPqg/FWYSEcukc=3D =3Doamg -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 12:16:57 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BFA9E16A418 for ; Fri, 28 Dec 2007 12:16:57 +0000 (UTC) (envelope-from mlobo@digiart.art.br) Received: from ipad.com.br (recife.ipad.com.br [200.249.204.129]) by mx1.freebsd.org (Postfix) with SMTP id CCDE913C4E9 for ; Fri, 28 Dec 2007 12:16:56 +0000 (UTC) (envelope-from mlobo@digiart.art.br) Received: (qmail 41428 invoked by uid 79); 28 Dec 2007 11:50:13 -0000 Received: from 189.70.60.10 by recife.ipad.com.br (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.92rc2/5270. spamassassin: 3.1.8. perlscan: 1.25-st-qms. Clear:RC:0(189.70.60.10):SA:0(-2.0/2.9):. Processed in 3.805259 secs); 28 Dec 2007 11:50:13 -0000 X-Spam-Status: No, hits=-2.0 required=2.9 X-Antivirus-IPAD-Mail-From: mlobo@digiart.art.br via recife.ipad.com.br X-Antivirus-IPAD: 1.25-st-qms (Clear:RC:0(189.70.60.10):SA:0(-2.0/2.9):. Processed in 3.805259 secs Process 41413) Received: from unknown (HELO lobo) (mlobo@digiart.art.br@189.70.60.10) by ipad.com.br with SMTP; 28 Dec 2007 11:50:10 -0000 From: Mario Lobo Organization: DigiArt To: User Questions Date: Fri, 28 Dec 2007 08:53:59 -0300 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712280853.59966.mlobo@digiart.art.br> Subject: Problem in /usr/local/etc/rc.d X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 12:16:57 -0000 Hello; here is a snip of dmesg: --------------------------------------------- Starting sshd. Starting cron. Local package initialization: Starting Init.... Starting Samba.... Removing stale Samba tdb files: . . . . . . . done Starting Init.... Starting Samba.... Removing stale Samba tdb files: . . . . . . . done --------------------------------------------- i have only 2 scripts in /usr/local/etc/rc.d: init.sh, which starts vsftpd and a dyndns client and samba.sh. As you can see, the scripts in that directory are beeing ran twice !. I looked up and down the server (/etc/init.d specially), trying to see why this is happening and I can't find anything !. Would anybody have a suggestion on what I should look for? Thanks, P.S. - I wish you all a happy 2008 ! My guts keep telling me that this is going to be a great year for FreeBSD !! -- Mario Lobo http://www.mallavoodoo.com.br FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!] (99,7% winedows FREE) From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 12:23:22 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 11C0216A46B for ; Fri, 28 Dec 2007 12:23:22 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 5E32313C457; Fri, 28 Dec 2007 12:23:21 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <4774EAB8.6030304@FreeBSD.org> Date: Fri, 28 Dec 2007 13:23:20 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Mario Lobo References: <200712280853.59966.mlobo@digiart.art.br> In-Reply-To: <200712280853.59966.mlobo@digiart.art.br> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Problem in /usr/local/etc/rc.d X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 12:23:22 -0000 Mario Lobo wrote: > Hello; > > here is a snip of dmesg: > > --------------------------------------------- > Starting sshd. > Starting cron. > Local package initialization: > Starting Init.... > Starting Samba.... > Removing stale Samba tdb files: > . > . > . > . > . > . > . > done > Starting Init.... > Starting Samba.... > Removing stale Samba tdb files: > . > . > . > . > . > . > . > done > --------------------------------------------- > i have only 2 scripts in /usr/local/etc/rc.d: > init.sh, which starts vsftpd and a dyndns client > and samba.sh. > > As you can see, the scripts in that directory are beeing ran twice !. I looked > up and down the server (/etc/init.d specially), trying to see why this is > happening and I can't find anything !. > > Would anybody have a suggestion on what I should look for? > > Thanks, > > P.S. - I wish you all a happy 2008 ! My guts keep telling me that this is > going to be a great year for FreeBSD !! Check your /etc/rc.conf settings, e.g. local_startup or whatever controls rc.d directories. Either /usr/local is listed twice or it still lists /usr/X11R6 after it was replaced by a symlink to /usr/local. In the latter case this should have been taken care of by the xorg upgrade process. Kris From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 12:57:53 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A1AF016A477 for ; Fri, 28 Dec 2007 12:57:53 +0000 (UTC) (envelope-from mlobo@digiart.art.br) Received: from ipad.com.br (recife.ipad.com.br [200.249.204.129]) by mx1.freebsd.org (Postfix) with SMTP id 79E3B13C4E1 for ; Fri, 28 Dec 2007 12:57:51 +0000 (UTC) (envelope-from mlobo@digiart.art.br) Received: (qmail 57298 invoked by uid 79); 28 Dec 2007 12:57:48 -0000 Received: from 189.70.60.10 by recife.ipad.com.br (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.92rc2/5270. spamassassin: 3.1.8. perlscan: 1.25-st-qms. Clear:RC:0(189.70.60.10):SA:0(-2.1/2.9):. Processed in 3.993857 secs); 28 Dec 2007 12:57:48 -0000 X-Spam-Status: No, hits=-2.1 required=2.9 X-Antivirus-IPAD-Mail-From: mlobo@digiart.art.br via recife.ipad.com.br X-Antivirus-IPAD: 1.25-st-qms (Clear:RC:0(189.70.60.10):SA:0(-2.1/2.9):. Processed in 3.993857 secs Process 57284) Received: from unknown (HELO lobo) (mlobo@digiart.art.br@189.70.60.10) by ipad.com.br with SMTP; 28 Dec 2007 12:57:44 -0000 From: Mario Lobo Organization: DigiArt To: Kris Kennaway Date: Fri, 28 Dec 2007 10:01:34 -0300 User-Agent: KMail/1.9.7 References: <200712280853.59966.mlobo@digiart.art.br> <4774EAB8.6030304@FreeBSD.org> In-Reply-To: <4774EAB8.6030304@FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712281001.34605.mlobo@digiart.art.br> Cc: User Questions Subject: Re: Problem in /usr/local/etc/rc.d [SOLVED] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 12:57:53 -0000 On Friday 28 December 2007 09:23:20 Kris Kennaway wrote: > Mario Lobo wrote: > > Hello; > > > > here is a snip of dmesg: > > > > --------------------------------------------- > > Starting sshd. > > Starting cron. > > Local package initialization: > > Starting Init.... > > Starting Samba.... > > Removing stale Samba tdb files: > > . > > . > > . > > . > > . > > . > > . > > done > > Starting Init.... > > Starting Samba.... > > Removing stale Samba tdb files: > > . > > . > > . > > . > > . > > . > > . > > done > > --------------------------------------------- > > i have only 2 scripts in /usr/local/etc/rc.d: > > init.sh, which starts vsftpd and a dyndns client > > and samba.sh. > > > > As you can see, the scripts in that directory are beeing ran twice !. I > > looked up and down the server (/etc/init.d specially), trying to see why > > this is happening and I can't find anything !. > > > > Would anybody have a suggestion on what I should look for? > > > > Thanks, > > > > P.S. - I wish you all a happy 2008 ! My guts keep telling me that this is > > going to be a great year for FreeBSD !! > > Check your /etc/rc.conf settings, e.g. local_startup or whatever > controls rc.d directories. Either /usr/local is listed twice or it > still lists /usr/X11R6 after it was replaced by a symlink to /usr/local. > In the latter case this should have been taken care of by the xorg > upgrade process. > > Kris Right on the spot Kris !! i had local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. on /etc/defaults/rc.conf Thanks !! -- Mario Lobo http://www.mallavoodoo.com.br FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!] (99,7% winedows FREE) From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 13:44:46 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 91BD216A417 for ; Fri, 28 Dec 2007 13:44:46 +0000 (UTC) (envelope-from sonicy@otenet.gr) Received: from aiolos.otenet.gr (aiolos.otenet.gr [195.170.0.93]) by mx1.freebsd.org (Postfix) with ESMTP id 0762A13C442 for ; Fri, 28 Dec 2007 13:44:45 +0000 (UTC) (envelope-from sonicy@otenet.gr) Received: from freebsdgr.dyndns.org (athedsl-14099.home.otenet.gr [87.202.55.129]) (authenticated bits=0) by aiolos.otenet.gr (8.13.8/8.13.8/Debian-3) with ESMTP id lBSDiWhL031652; Fri, 28 Dec 2007 15:44:33 +0200 Message-ID: <4774FDC0.3010301@otenet.gr> Date: Fri, 28 Dec 2007 15:44:32 +0200 From: Manolis Kiagias User-Agent: Thunderbird 2.0.0.9 (X11/20071217) MIME-Version: 1.0 To: Mario Lobo References: <200712280853.59966.mlobo@digiart.art.br> <4774EAB8.6030304@FreeBSD.org> <200712281001.34605.mlobo@digiart.art.br> In-Reply-To: <200712281001.34605.mlobo@digiart.art.br> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Problem in /usr/local/etc/rc.d [SOLVED] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 13:44:46 -0000 Mario Lobo wrote: > On Friday 28 December 2007 09:23:20 Kris Kennaway wrote: > >> Mario Lobo wrote: >> >>> Hello; >>> >>> here is a snip of dmesg: >>> >>> --------------------------------------------- >>> Starting sshd. >>> Starting cron. >>> Local package initialization: >>> Starting Init.... >>> Starting Samba.... >>> Removing stale Samba tdb files: >>> . >>> . >>> . >>> . >>> . >>> . >>> . >>> done >>> Starting Init.... >>> Starting Samba.... >>> Removing stale Samba tdb files: >>> . >>> . >>> . >>> . >>> . >>> . >>> . >>> done >>> --------------------------------------------- >>> i have only 2 scripts in /usr/local/etc/rc.d: >>> init.sh, which starts vsftpd and a dyndns client >>> and samba.sh. >>> >>> As you can see, the scripts in that directory are beeing ran twice !. I >>> looked up and down the server (/etc/init.d specially), trying to see why >>> this is happening and I can't find anything !. >>> >>> Would anybody have a suggestion on what I should look for? >>> >>> Thanks, >>> >>> P.S. - I wish you all a happy 2008 ! My guts keep telling me that this is >>> going to be a great year for FreeBSD !! >>> >> Check your /etc/rc.conf settings, e.g. local_startup or whatever >> controls rc.d directories. Either /usr/local is listed twice or it >> still lists /usr/X11R6 after it was replaced by a symlink to /usr/local. >> In the latter case this should have been taken care of by the xorg >> upgrade process. >> >> Kris >> > > Right on the spot Kris !! > > i had > local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. > > on /etc/defaults/rc.conf > > Thanks !! > > Don't edit the /etc/defaults/rc.conf Just override it by inserting: local_startup="/usr/local/etc/rc.d" in your /etc/rc.conf file. Manolis From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 14:18:33 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9D34216A418 for ; Fri, 28 Dec 2007 14:18:33 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from gaia.nimnet.asn.au (nimbin.lnk.telstra.net [139.130.45.143]) by mx1.freebsd.org (Postfix) with ESMTP id EDB7113C447 for ; Fri, 28 Dec 2007 14:18:31 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from localhost (smithi@localhost) by gaia.nimnet.asn.au (8.8.8/8.8.8R1.5) with SMTP id BAA03226; Sat, 29 Dec 2007 01:18:21 +1100 (EST) (envelope-from smithi@nimnet.asn.au) Date: Sat, 29 Dec 2007 01:18:20 +1100 (EST) From: Ian Smith To: Giorgos Keramidas In-Reply-To: <20071228091722.720C016A480@hub.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-questions@freebsd.org, Noah Subject: Re: removing ipfw rules X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 14:18:33 -0000 On Fri, 28 Dec 2007 02:21:54 +0200 Giorgos Keramidas wrote: > On 2007-12-27 15:47, Noah wrote: > > Hi, > > > > I have two ipfw rules that I want to remove. They are viewable with the > > "ipfw show" command > > > > > > --- snip --- > > > > 06600 0 0 allow ip from any to any proto tcp src-ip > > 66.66.66.66 dst-port 22 > > 06700 0 0 allow ip from any to any proto tcp src-ip > > 66.66.66.66 dst-port 22 > > > > --- snip ---- > > > > I am typing the command "/sbin/ipfw -q delete pass proto tcp src-ip > > 66.66.66.66 dst-port 22" > > > > but both lines remain. What am I doing wrong? > > There are differences between the visible rule: > > allow ip from any to any proto tcp src-ip 66.66.66.66 dst-port 22 > > and the one you are trying to delete: > > pass proto tcp src-ip 66.66.66.66 dst-port 22 > > Having said that, can you try something simpler, i.e. > > ipfw -q delete 6600 > ipfw -q delete 6700 > > This should work too, if I remember well enough the ipfw syntax. You do, but deleting by rule number/s is the only way. ipfw(8): ipfw [-q] {delete | zero | resetlog} [set] [number ...] Of course Noah could find rule number/s to delete with something like # ipfw delete `ipfw list | grep $somestring | awk '{print $1}'` if he was, um, courageous :) Safer tested first with ipfw show .. cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 14:32:18 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E64816A418 for ; Fri, 28 Dec 2007 14:32:18 +0000 (UTC) (envelope-from StevenFriedrich@InsightBB.com) Received: from mxsf06.insightbb.com (mxsf06.insightbb.com [74.128.0.76]) by mx1.freebsd.org (Postfix) with ESMTP id E503C13C45B for ; Fri, 28 Dec 2007 14:32:17 +0000 (UTC) (envelope-from StevenFriedrich@InsightBB.com) X-IronPort-AV: E=Sophos;i="4.24,216,1196658000"; d="scan'208";a="175347507" Received: from unknown (HELO asav02.insightbb.com) ([172.31.249.124]) by mxsf06.insightbb.com with ESMTP; 28 Dec 2007 09:32:16 -0500 X-IronPort-AV: E=Sophos;i="4.24,216,1196658000"; d="scan'208";a="180242831" Received: from 208-46-39-11.dia.static.qwest.net (HELO [10.7.44.127]) ([208.46.39.11]) by asavout02.manage.insightbb.com with ESMTP; 28 Dec 2007 09:32:16 -0500 Message-ID: <477508EF.1030901@InsightBB.com> Date: Fri, 28 Dec 2007 09:32:15 -0500 From: Steven Friedrich User-Agent: Thunderbird 1.5.0.14 (Windows/20071210) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: kernel hang X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 14:32:18 -0000 I tried to src upgrade a 6.2-RELEASE system to 6.3-RC3. When I reboot, it hangs just after describing the disk geometry. No error messages, even if I boot verbose. I can recover by booting kernel.old, changing my tag back, cvsup'ing, building everything... This appears to be a showstopper for 6.3 I've reproduced this on a fresh partition, fresh install of 6.2... -- Steven Friedrich Louisville, KY 40216 From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 15:19:22 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CF3FB16A417 for ; Fri, 28 Dec 2007 15:19:22 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from mta2.srv.hcvlny.cv.net (mta2.srv.hcvlny.cv.net [167.206.4.197]) by mx1.freebsd.org (Postfix) with ESMTP id 94C7113C447 for ; Fri, 28 Dec 2007 15:19:22 +0000 (UTC) (envelope-from aryeh.friedman@gmail.com) Received: from flosoft.no-ip.biz (ool-435559b8.dyn.optonline.net [67.85.89.184]) by mta2.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTR0053EMK5Z8Z0@mta2.srv.hcvlny.cv.net> for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 10:19:17 -0500 (EST) Received: from flosoft.no-ip.biz (localhost [IPv6:::1]) by flosoft.no-ip.biz (8.14.2/8.14.2) with ESMTP id lBSFJFER024855 for ; Fri, 28 Dec 2007 10:19:16 -0500 Date: Fri, 28 Dec 2007 10:19:15 -0500 From: "Aryeh M. Friedman" To: "freebsd-questions@freebsd.org" Message-id: <477513F3.40303@gmail.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7BIT X-Enigmail-Version: 0.95.5 User-Agent: Thunderbird 2.0.0.9 (X11/20071217) Subject: recommendations: new graphics card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 15:19:22 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am running 8-current amd64 on a e6850 with 4 GB of RAM and currently have a nvidia 5200 GT. Well I have a $100 gift card for amazon and decided to use it to get a new video card. I also run vista and occasionally a live cd for linux but I spend 90+% of my time in freebsd. My main use of the machine is (java) development, light office apps, maintaining my companies web site and light gaming (the only thing I use vista for) [currently c&c 3 but I want to try some newer things {I never play first person shooters}]. I have never used anything except nvidia cards but in seeing that the closed source driver is not going to be out anytime soon for amd64 I am willing to consider an ATI. Suggestions? - -- Aryeh M. Friedman FloSoft Systems http://www.flosoft-systems.com Developer, not business, friendly -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdRPzzIOMjAek4JIRAgWlAJ0YCcdwY3mKWr7vpocjw2exHhiVNACfbl1G Vpk/z+nDuUe0t2Ae2Ss0c7I= =JWsM -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 15:50:05 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E1D5616A4C1 for ; Fri, 28 Dec 2007 15:50:05 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.freebsd.org (Postfix) with ESMTP id 7C04513C4E5 for ; Fri, 28 Dec 2007 15:50:05 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from localhost (localhost [127.0.0.1]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBSFni5x049476; Fri, 28 Dec 2007 09:49:44 -0600 (CST) (envelope-from kdk@daleco.biz) X-Virus-Scanned: amavisd-new at daleco.biz Received: from ezekiel.daleco.biz ([127.0.0.1]) by localhost (ezekiel.daleco.biz [127.0.0.1]) (amavisd-new, port 10024) with LMTP id K0fJCAcKvmy2; Fri, 28 Dec 2007 09:49:38 -0600 (CST) Received: from archangel.daleco.biz (dsl.daleco.biz [209.125.108.70]) by ezekiel.daleco.biz (8.13.8/8.13.8) with ESMTP id lBSFnURG049470; Fri, 28 Dec 2007 09:49:32 -0600 (CST) (envelope-from kdk@daleco.biz) Message-ID: <47751B05.6080807@daleco.biz> Date: Fri, 28 Dec 2007 09:49:25 -0600 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.2) Gecko/20070418 SeaMonkey/1.1.1 MIME-Version: 1.0 To: Olivier Nicole References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> <26ddd1750712272037x594336efndcd136ee2101e3e7@mail.gmail.com> <200712280508.lBS58jLo022219@banyan.cs.ait.ac.th> In-Reply-To: <200712280508.lBS58jLo022219@banyan.cs.ait.ac.th> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 15:50:06 -0000 Olivier Nicole wrote: >> Again, I'm not trying to convince you otherwise or say that using >> BIND is a bad idea. It's just that I'm curious because we use >> Squid for this sort of thing, and I was wondering why BIND instead? > > I think another issue is that Squid will only filter HTTP/FTP > connections, while DNS would allow to filter any type of traffic that > would try to go to places with a bad name. > > Olivier In the absence of egress filtering on the firewall, that would definitely be an advantage. Does anyone use BIND for filtering in a small to medium business environment then? How does it perform? Kevin Kinsey -- I trust the first lion he meets will do his duty. -- J. P. Morgan on Teddy Roosevelt's safari From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 15:50:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8EFEE16A46C for ; Fri, 28 Dec 2007 15:50:49 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: from web57015.mail.re3.yahoo.com (web57015.mail.re3.yahoo.com [66.196.97.119]) by mx1.freebsd.org (Postfix) with SMTP id 2B46C13C500 for ; Fri, 28 Dec 2007 15:50:49 +0000 (UTC) (envelope-from unga888@yahoo.com) Received: (qmail 13504 invoked by uid 60001); 28 Dec 2007 15:50:48 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=rHOgCFdqa16Jv6Qjj+4eYTEtOoH4JFI+jyOiGpW/X+dki9cazyA6RQI0Hk2Caxxh3M50/bDYCPZs2RBF4msZNGIl3larjqhEwE6oYGoC1kyIuofQHnEaZp9uMOSrBERmbt8B4C+8Z7c7bkxaCcouwJX4R7AX5S0/u4xkEFddk8M=; X-YMail-OSG: 7yuRRKcVM1m6I0iNgNcIAzh5Byc_IsPJTOtMF_ro_34pXFsI_xHja42jQQsf6X__Xz7_r48qIVbAzC_o9dMPZQgw5iXUB8BiPldE5h_43TiK5ij9wd8S33GyCSuU53Ki3QZpCFBHXjg5nQ-- Received: from [165.21.155.89] by web57015.mail.re3.yahoo.com via HTTP; Fri, 28 Dec 2007 07:50:48 PST Date: Fri, 28 Dec 2007 07:50:48 -0800 (PST) From: Unga To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <425294.13225.qm@web57015.mail.re3.yahoo.com> Subject: Process priority questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 15:50:49 -0000 Hi all I'm sorry to trouble you guys with this issue again. As per /usr/include/sys/priority.h: /* * Priorities range from 0 to 255, but differences of less then 4 (RQ_PPQ) * are insignificant. Ranges are as follows: * * Interrupt threads: 0 - 63 * Top half kernel threads: 64 - 127 * Realtime user threads: 128 - 159 * Time sharing user threads: 160 - 223 * Idle user threads: 224 - 255 * */ ps aux -o pri,ni,rtprio,command shows following: USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND PRI NI RTPRIO COMMAND root 12 91.0 0.0 0 8 ?? RL 9:50AM 830:41.81 [idle: cpu0] 171 0 idle:25 [idle: cpu0] root 13 0.0 0.0 0 8 ?? WL 9:50AM 3:28.96 [swi4: clock sio -32 0 intr:52 [swi4: clock sio root 696 0.0 0.1 3240 764 ?? Is 9:51AM 0:00.06 /usr/sbin/moused 96 0 normal /usr/sbin/moused 1. I want understand how to interpret above numbers related to process priorities? 1a) 171 0 idle:25 What is 171? Does it mean it has upgraded to “Time sharing user threads” range to be executed? What is idle:25? Is it its default priority 224+25=249? 1b) -32 0 intr:52 What is -32? What is 52? Is it its default priority 52 in the “Interrupt threads” range? 1c) 96 0 normal The “normal” is what? Is it priority 160 or 223? 2. What is the value range can be specified for process priority in /etc/login.conf? 3. What is the name of the program which process or validate priority values specified in /etc/login.conf? Regards Unga ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 16:27:21 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1A94A16A417 for ; Fri, 28 Dec 2007 16:27:21 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.181]) by mx1.freebsd.org (Postfix) with ESMTP id CC01313C46E for ; Fri, 28 Dec 2007 16:27:20 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5908116waf.3 for ; Fri, 28 Dec 2007 08:27:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=lKggD5/btdBJS7nTuVmNyB/Mwc6yBSKhvCoFlh31eNE=; b=Z3tswNAfUt4MbguBWY+ekeyHZHf36fJOVWQ8nMYwuNGQAOxmw3lPcFWsGMYe3SCWwvbnJ5v1I97ysndwEG0JZQsUlmUaALsrkkLFNAcVvfDeHsRfnj6QPAU8n7/IQBgy4TrUgMPqZ31ZpyP19GPdWmVc0gSADQQPZRAFGKsie5c= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Q/TwH+E36Oc/A0dqrI+5Pb0HRV5+I4iZBcIfENyC9O5jfcFFMEjuFtQekF+LocTm8KKrCgcmCe3TzTRaEgXTlBX6eY+eoZufcb4amixqQVxm/kK2dh5MqSZmlYdIlLT6nWSOzTsLYdHjRy4dcBokfsdFnyBEDntR5wc5LRsG03o= Received: by 10.114.13.1 with SMTP id 1mr9176992wam.106.1198859240548; Fri, 28 Dec 2007 08:27:20 -0800 (PST) Received: by 10.114.47.12 with HTTP; Fri, 28 Dec 2007 08:27:20 -0800 (PST) Message-ID: <839aec700712280827n24adcd51m5a16cc4e178669f7@mail.gmail.com> Date: Fri, 28 Dec 2007 09:27:20 -0700 From: "Darren Spruell" To: "User Questions" In-Reply-To: <47751B05.6080807@daleco.biz> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> <26ddd1750712272037x594336efndcd136ee2101e3e7@mail.gmail.com> <200712280508.lBS58jLo022219@banyan.cs.ait.ac.th> <47751B05.6080807@daleco.biz> Cc: Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 16:27:21 -0000 On Dec 28, 2007 8:49 AM, Kevin Kinsey wrote: > Olivier Nicole wrote: > >> Again, I'm not trying to convince you otherwise or say that using > >> BIND is a bad idea. It's just that I'm curious because we use > >> Squid for this sort of thing, and I was wondering why BIND instead? > > > > I think another issue is that Squid will only filter HTTP/FTP > > connections, while DNS would allow to filter any type of traffic that > > would try to go to places with a bad name. > > > > Olivier > > In the absence of egress filtering on the firewall, that > would definitely be an advantage. Does anyone use BIND > for filtering in a small to medium business environment > then? How does it perform? Performs fine. # rndc status number of zones: 17210 ... My 17000+ zones are loaded from the DNS-BH project and increase the startup time of named to about 10 seconds and bump the resident memory size up to about 55M. (AMD Duron 750MHz). There's no real performance hit per se by DNS blackholing, other than the resource utilization increase needed for handling additional zones; your name server would normally be handling these DNS lookups anyway.You're just overriding the response locally rather than recursing for it. The zones themselves typically end up being very small, like a single wildcard record pointing to 127.0.0.1 or a honeypot or whatever. DS From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 16:28:51 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 634E916A420 for ; Fri, 28 Dec 2007 16:28:51 +0000 (UTC) (envelope-from bitabyss@gmail.com) Received: from cartman.xxiii.com (cartman.xxiii.com [208.62.177.45]) by mx1.freebsd.org (Postfix) with ESMTP id 08B8913C4E5 for ; Fri, 28 Dec 2007 16:28:50 +0000 (UTC) (envelope-from bitabyss@gmail.com) Received: from [172.23.23.190] (lan23.xxiii.com [208.62.177.50]) by cartman.xxiii.com (8.13.8/8.13.8) with ESMTP id lBSGSnNU013644; Fri, 28 Dec 2007 11:28:49 -0500 (EST) (envelope-from bitabyss@gmail.com) Message-ID: <47752446.8090908@gmail.com> Date: Fri, 28 Dec 2007 11:28:54 -0500 From: Rob User-Agent: Thunderbird 1.5.0.14 (Windows/20071210) MIME-Version: 1.0 To: Maxim Khitrov References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> In-Reply-To: <47744048.6020202@daleco.biz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 16:28:51 -0000 Kevin Kinsey wrote: > Just a question, and I'm not trying to cast doubt on your plan; I'm > curious why using BIND for this purpose instead of a proxy, which is > a more typical application as I understand it? I was trying to do something similar. I didn't research too hard, but figured the only way to use Bind would be to make my server authoritative for all those domains, which meant a huge config file and potential overhead, as well as possibly breaking access to desirable servers in the domains. So hosts seemed easier, but apparently Bind never looks at hosts. I did find that Squid (which I already had installed and in limited use) has its own DNS resolver, and it does look at hosts first before going to the nameserver. Then I found this site: http://everythingisnt.com/hosts.html and put their list in hosts, and now client PCs get a squid error in place of ad junk. Works ok for me ;) -Rob From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:02:00 2007 Return-Path: Delivered-To: FreeBSD-questions@FreeBSD.org Received: by hub.freebsd.org (Postfix, from userid 645) id C019E16A41B; Fri, 28 Dec 2007 17:02:00 +0000 (UTC) To: FreeBSD-questions@FreeBSD.org Message-Id: <20071228170200.C019E16A41B@hub.freebsd.org> Date: Fri, 28 Dec 2007 17:02:00 +0000 (UTC) From: grog@FreeBSD.ORG (Greg Lehey) Cc: Subject: How to get best results from FreeBSD-questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:02:00 -0000 How to get the best results from FreeBSD questions. =================================================== Last update $Date: 2005/08/10 02:21:44 $ This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from freebsd-questions-request@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions@freebsd.org mailing list! If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: http://lists.freebsd.org/mailman/options/freebsd-questions/me@me.org (obviously, substitute your mail address for "me@me.org"). You can also make such adjustments via email by sending a message to: freebsd-questions-request@freebsd.org with the word 'help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. Normally, Mailman will remind you of your freebsd.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you. Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as grog@lemis.de. Since then, I have changed it to grog@lemis.com. If I were to try to remove grog@lemis.com from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.org, and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions or -hackers? ========================================= Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In some cases, it's not really clear which group you should ask. The following criteria should help for 99% of all questions, however: If the question is of a general nature, first check whether this isn't a Frequently Asked Question (FAQ). There's a list of these questions at http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/index.html, and also on your own system (once you've installed it) at /usr/share/doc/en/books/faq/index.html. Check there, and if you don't find an answer, ask FreeBSD-questions. Examples might be questions about installing FreeBSD or the use of a particular UNIX utility. If you think the question relates to a bug, but you're not sure, or you don't know how to look for it, send the message to FreeBSD-questions. If the question relates to a bug, and you're almost sure that it's a bug (for example, you can pinpoint the place in the code where it happens, and you maybe have a fix), then send the message to FreeBSD-hackers. You should also enter a problem report with the send-pr utility. If the question relates to enhancements to FreeBSD, and you can make suggestions about how to implement them, then send the message to FreeBSD-hackers. If the question is of particularly technical nature, such as implementation details or suggestions for improvements, then send the message to FreeBSD-hackers. There are also a number of other specialized mailing lists, for example FreeBSD-isp, which caters to the interests of ISPs (Internet Service Providers) who run FreeBSD. If you happen to be an ISP, this doesn't mean you should automatically send your questions to FreeBSD-isp. The criteria above still apply, and it's in your interest to stick to them, since you're more likely to get good results that way. IV: How to submit a question ============================= When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer even if you follow these rules. It's much more possible to not get an answer if you don't. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. ``FreeBSD problem'' or ``Help'' aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. When sending a new message, well, send a new message. Don't reply to some other message, erase the old content and change the subject line. That leaves an In-reply-to: header which many mail readers use to thread messages, so your message shows up as a reply to some other message. People often delete messages a whole thread at a time, so apart from irritating people, you also run a chance of having the message deleted unread. 4. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers or badly configured mailers. The following mailers are known to send out badly formatted messages without you finding out about them: Eudora exmh Microsoft Exchange Microsoft Internet Mail Microsoft Outlook Netscape As you can see, the mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. For further information on this subject, check out http://www.lemis.com/email.html. 5. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 6. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 7. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: If you get error messages, don't say ``I get error messages'', say (for example) ``I get the error message 'No route to host'''. If your system panics, don't say ``My system panicked'', say (for example) ``my system panicked with the message 'free vnode isn't'''. If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. If you have difficulty getting PPP to run, describe the configuration. Which version of PPP do you use? What kind of authentication do you have? Do you have a static or dynamic IP address? What kind of messages do you get in the log file? 8. If you don't get an answer immediately, or if you don't even see your own message appear on the list immediately, don't resend the message. Wait at least 24 hours. The FreeBSD mailer offloads messages to a number of subordinate mailers around the world, and sometimes it can take several hours for the mail to get through. And once it gets through, the one person who might know the answer will probably just have gone to bed in his part of the world. 9. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question (yes, it's the same one in each case :-). You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- V: How to follow up to a question ================================= Often you will want to send in additional information to a question you have already sent. The best way to do this is to reply to your original message. This has three advantages: 1. You include the original message text, so people will know what you're talking about. Don't forget to trim unnecessary text out, though. 2. The text in the subject line stays the same (you did remember to put one in, didn't you?). Many mailers will sort messages by subject. This helps group messages together. 3. The message reference numbers in the header will refer to the previous message. Some mailers, such as mutt, can thread messages, showing the exact relationships between the messages. VI: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure you understand the question? Very frequently, the person who asks the question is confused or doesn't express himself very well. Even with the best understanding of the system, it's easy to send a reply which doesn't answer the question. This doesn't help: you'll leave the person who submitted the question more frustrated or confused than ever. If nobody else answers, and you're not too sure either, you can always ask for more information. 5. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 6. Unless there's a good reason to do otherwise, reply to the sender and to FreeBSD-questions. Many people on the FreeBSD-questions are "lurkers": they learn by reading messages sent and replied to by others. If you take a message which is of general interest off the list, you're depriving these people of their information. Be careful with group replies; lots of people send messages with hundreds of CCs. If this is the case, be sure to trim the Cc: lines appropriately. 7. Include relevant text from the original message. Trim it to the minimum, but don't overdo it. It should still be possible for somebody who didn't read the original message to understand what you're talking about. 8. Use some technique to identify which text came from the original message, and which text you add. I personally find that prepending ``> '' to the original message works best. Leaving white space after the ``> '' and leave empty lines between your text and the original text both make the result more readable. 9. Put your response in the correct place (after the text to which it replies). It's very difficult to read a thread of responses where each reply comes before the text to which it replies. 10. Most mailers change the subject line on a reply by prepending a text such as ``Re: ''. If your mailer doesn't do it automatically, you should do it manually. 11. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), please fix it. In the case of an incorrect subject line (such as ``HELP!!??''), change the subject line to (say) ``Re: Difficulties with sync PPP (was: HELP!!??)''. That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. $Id: Howto-ask-questions,v 1.6 2005/08/10 02:21:44 grog Exp $ _______________________________________________ Thanks to Josh Paetzel for updating this document to describe mailman. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:02:00 2007 Return-Path: Delivered-To: FreeBSD-questions@FreeBSD.org Received: by hub.freebsd.org (Postfix, from userid 645) id C569A16A421; Fri, 28 Dec 2007 17:02:00 +0000 (UTC) To: FreeBSD-questions@FreeBSD.org Message-Id: <20071228170200.C569A16A421@hub.freebsd.org> Date: Fri, 28 Dec 2007 17:02:00 +0000 (UTC) From: grog@FreeBSD.ORG (Greg Lehey) Cc: Subject: "The Complete FreeBSD": errata and addenda X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:02:00 -0000 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, The Complete FreeBSD, published by O'Reilly, is no exception. Inevitably, a number of bugs and changes have surfaced. "The Complete FreeBSD" has been through a total of five editions, including its predecessor "Installing and Running FreeBSD". Two of these have been reprinted with corrections. I maintain a series of errata pages. Start at http://www.lemis.com/errata-4.html to find out how to get the errata information. Note also that the book has now been released for free download in PDF form. Instead of downloading the changed pages, you may prefer to download the entire book. See http://www.lemis.com/grog/Documentation/CFBSD/ for more information. Have you found a problem with the book, or maybe something confusing? Please let me know: I'm no longer constantly updating it, but I may be able to help Greg From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:17:37 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 706A216A421 for ; Fri, 28 Dec 2007 17:17:37 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: from outbound-mail-37.bluehost.com (outbound-mail-37.bluehost.com [69.89.20.191]) by mx1.freebsd.org (Postfix) with SMTP id 2889013C4EC for ; Fri, 28 Dec 2007 17:17:36 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: (qmail 15302 invoked by uid 0); 28 Dec 2007 17:17:36 -0000 Received: from unknown (HELO box183.bluehost.com) (69.89.25.183) by mailproxy2.bluehost.com with SMTP; 28 Dec 2007 17:17:36 -0000 Received: from c-24-9-123-251.hsd1.co.comcast.net ([24.9.123.251] helo=demeter.hydra) by box183.bluehost.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.68) (envelope-from ) id 1J8Iq0-00067x-C8 for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 10:17:36 -0700 Received: from demeter.hydra (localhost [127.0.0.1]) by demeter.hydra (8.13.6/8.13.6) with ESMTP id lBSHHYIA092987 for ; Fri, 28 Dec 2007 10:17:34 -0700 (MST) (envelope-from perrin@apotheon.com) Received: (from ren@localhost) by demeter.hydra (8.13.6/8.13.6/Submit) id lBSHHXeZ092986 for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 10:17:33 -0700 (MST) (envelope-from perrin@apotheon.com) X-Authentication-Warning: demeter.hydra: ren set sender to perrin@apotheon.com using -f Date: Fri, 28 Dec 2007 10:17:33 -0700 From: Chad Perrin To: freebsd-questions@freebsd.org Message-ID: <20071228171733.GB89701@demeter.hydra> Mail-Followup-To: freebsd-questions@freebsd.org References: <20071218040802.GB6678@ayn.mi.celestial.com> <20071218054048.6EE7.A38C9147@seibercom.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20071218054048.6EE7.A38C9147@seibercom.net> User-Agent: Mutt/1.4.2.3i X-Identified-User: {737:box183.bluehost.com:apotheon:apotheon.net} {sentby:bopbeforesmtp 24.9.123.251 authed with apotheon.com} Subject: Re: SSH through port forwarding X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:17:37 -0000 On Tue, Dec 18, 2007 at 05:44:11AM -0500, Gerard Seibert wrote: > > On December 18, 2007 at 12:47AM sham khalil wrote: > > > > once you open port 22 to public ip, you'll get people try to bruteforce your > > machine. > > if you don't want that set sshd to listen to a higher number like 5522 > > then forward port 5522 from the router to the internal machines. > > > > unfortunately for wrt54g, you can't forward port 5522 to 22 for internal > > machine. > > Security through obscurity is a poor substitute for security. Port scanners > will eventually find that port also. One needs something else for security against brute-force attempts, but changing the port number does help cut down on the amount of bandwidth consumption on the LAN side of your router by allowing the router to ignore/deny all incoming traffic on port 22. -- CCD CopyWrite Chad Perrin [ http://ccd.apotheon.org ] Marvin Minsky: "It's just incredible that a trillion-synapse computer could actually spend Saturday afternoon watching a football game." From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:19:23 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 05D0D16A418 for ; Fri, 28 Dec 2007 17:19:23 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: from outbound-mail-80.bluehost.com (outbound-mail-80.bluehost.com [69.89.22.29]) by mx1.freebsd.org (Postfix) with SMTP id B5BA413C447 for ; Fri, 28 Dec 2007 17:19:22 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: (qmail 23535 invoked by uid 0); 28 Dec 2007 17:19:21 -0000 Received: from unknown (HELO box183.bluehost.com) (69.89.25.183) by mailproxy4.bluehost.com with SMTP; 28 Dec 2007 17:19:21 -0000 Received: from c-24-9-123-251.hsd1.co.comcast.net ([24.9.123.251] helo=demeter.hydra) by box183.bluehost.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.68) (envelope-from ) id 1J8Irh-0006OG-8c for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 10:19:21 -0700 Received: from demeter.hydra (localhost [127.0.0.1]) by demeter.hydra (8.13.6/8.13.6) with ESMTP id lBSHJJBk093003 for ; Fri, 28 Dec 2007 10:19:19 -0700 (MST) (envelope-from perrin@apotheon.com) Received: (from ren@localhost) by demeter.hydra (8.13.6/8.13.6/Submit) id lBSHJJ0h093002 for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 10:19:19 -0700 (MST) (envelope-from perrin@apotheon.com) X-Authentication-Warning: demeter.hydra: ren set sender to perrin@apotheon.com using -f Date: Fri, 28 Dec 2007 10:19:18 -0700 From: Chad Perrin To: freebsd-questions@freebsd.org Message-ID: <20071228171918.GC89701@demeter.hydra> Mail-Followup-To: freebsd-questions@freebsd.org References: <340a29540712171957l7b3e426fh9f35051a7bc6d48e@mail.gmail.com> <200712180602.19729.lists-fbsd@shadypond.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200712180602.19729.lists-fbsd@shadypond.com> User-Agent: Mutt/1.4.2.3i X-Identified-User: {737:box183.bluehost.com:apotheon:apotheon.net} {sentby:bopbeforesmtp 24.9.123.251 authed with apotheon.com} Subject: Re: SSH through port forwarding X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:19:23 -0000 On Tue, Dec 18, 2007 at 06:02:18AM +0000, Pollywog wrote: > > Make sure the ISP is not blocking port 22. If they block it, you will need to > change the SSH port in sshd_config and then set the router to forward the > port to the server's internal IP address. It's a good idea to change the > port anyway, in order not to be obvious to script kiddies. You shouldn't have to change the port on which SSH listens on the FreeBSD machine. Just set up the router to forward from the higher port number on incoming requests to port 22 on the internal machine. It should be less work that way. -- CCD CopyWrite Chad Perrin [ http://ccd.apotheon.org ] MacUser, Nov. 1990: "There comes a time in the history of any project when it becomes necessary to shoot the engineers and begin production." From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:25:28 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4F67D16A468 for ; Fri, 28 Dec 2007 17:25:28 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id F410913C474 for ; Fri, 28 Dec 2007 17:25:27 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDESK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id lBSHOl8V020602; Fri, 28 Dec 2007 09:24:49 -0800 (PST) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Bahman Movaqar" , Date: Fri, 28 Dec 2007 09:25:57 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 In-Reply-To: <20071226142208.6962fcf6@movaqar> Importance: Normal Cc: Subject: RE: HP Proliant Series X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:25:28 -0000 We run FreeBSD64 AMD build on HP DL320 G5 and it works great. But we use the embedded SATA chip on the MB, not the HP SmartArray card. I'm interested in your experiences with the SmartArray card. Ted > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Bahman Movaqar > Sent: Wednesday, December 26, 2007 2:52 AM > To: freebsd-questions@freebsd.org > Subject: HP Proliant Series > > > Hi all, > > Does anybody have some experience with HP Proliant DL380 G5? Is it > compatible with FreeBSD (in particular 6.2)? Following is the hardware > configuration: > CPU: Intel Xeon 5160 (2 GHz, FSB 1333) > RAM: HP 4GM PC2-5300 DDR2 > HDD: 2 x 72GB 3G SAS (15K) > Storage Ctrlr: HP Smart Array P400/256 > NIC: Broadcom 5721 PCI-Express > > TIA, > > -- > Bahman Movaqar > PGP KeyID: 0x0CE28F5C (keyserver2.pgp.com) > > Give me six lines written by the most honourable of men, and I will > find an excuse in them to hang him. > -Cardinal Richelieu > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.17.11/1200 - Release Date: > 12/27/2007 1:34 PM > From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:30:00 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 682C516A419 for ; Fri, 28 Dec 2007 17:30:00 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [65.75.192.90]) by mx1.freebsd.org (Postfix) with ESMTP id 1931413C457 for ; Fri, 28 Dec 2007 17:29:59 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from TEDSDESK (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.13.8/8.13.8) with SMTP id lBSHTuY8020655; Fri, 28 Dec 2007 09:29:59 -0800 (PST) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Tim Daneliuk" , "FreeBSD Mailing List" Date: Fri, 28 Dec 2007 09:31:05 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1914 In-Reply-To: <4772C28D.6000509@tundraware.com> Importance: Normal Cc: Subject: RE: CDROM Boot Hangs But Only Under 6.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:30:00 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Tim Daneliuk > Sent: Wednesday, December 26, 2007 1:07 PM > To: FreeBSD Mailing List > Subject: Re: CDROM Boot Hangs But Only Under 6.x > > > This was a brand new Abit LG-95Z mobo. The solution was to return it > and get an Intel mobo instead. Problem fixed. Thanks for letting us know this was a problem board. I would strongly request you let Abit know what happened as well. It is only through feedback like this that motherboard manufacturers will actually test their stuff under FreeBSD. Ted From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:33:47 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 37FD616A41A for ; Fri, 28 Dec 2007 17:33:47 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id E8E9013C45B for ; Fri, 28 Dec 2007 17:33:46 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5940647waf.3 for ; Fri, 28 Dec 2007 09:33:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=xihcQpg+AitWJFC3RGainEXZ10AhGeBz3b++zikbBhY=; b=iKVOzlNSAlLdo9HjBeaayJBRQt3FMxbDbHhr1nSJ6n+vIswaGAtUPEla3rKnto7kxX0j2JXqoMgDOV44QMAiBlu8Ajxb6hsxhWA5qXgYoBJ4gHRvXuOtqN63xZFRobeKtKFK5lSS4tbeJvNzAT9Zl2Wr4hJWV2G29GwIMd2flf4= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=xtwmLb9RiXnTGSfUuf3Kmgbjna4YdB/lxsaVW6zBjwdhb1a7PktSLHhQTG7vBzFGIVsuoBHfr11hcvUNiIourXQV2owmXa1mx5SqmekUL2WzfE2oyOR3tBsFgmhFnj9TWQXalJqD25CU0xk7xJZMRDJp42ciUD/K9IUvC7mmXKg= Received: by 10.115.23.12 with SMTP id a12mr9419484waj.96.1198863226809; Fri, 28 Dec 2007 09:33:46 -0800 (PST) Received: from sniper ( [71.221.173.206]) by mx.google.com with ESMTPS id f20sm16000964waf.56.2007.12.28.09.33.46 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 28 Dec 2007 09:33:46 -0800 (PST) From: Andrew Falanga To: FreeBSD Questions Date: Fri, 28 Dec 2007 10:33:40 -0700 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712281033.40654.af300wsm@gmail.com> Subject: How to make sendmail listen on an address other than the loopback X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:33:47 -0000 Hi, I'm trying to get an e-mail system working for my church (whitneybaptist.org). I've added a file called local-host-names in /etc/mail as described in the Handbook, then did "/etc/rc.d/sendmail restart" and then did "sockstat | grep sendmail" and got the following results: root sendmail 32889 3 tcp4 127.0.0.1:25 *:* root sendmail 32889 4 dgram -> /var/run/logpriv smmsp sendmail 696 3 dgram -> /var/run/log Now, with the exception of the additional file, nothing has been done to this stock sendmail configuration (system is 6.2-RELEASE-p7). How would I make sendmail listen on the ip of 192.168.2.23? I do have some experience with sendmail, however, it was several years ago and I've forgotten quite a bit. Why isn't it listening on that address now? Andy From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:39:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C05D616A419 for ; Fri, 28 Dec 2007 17:39:52 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: from nz-out-0506.google.com (nz-out-0506.google.com [64.233.162.225]) by mx1.freebsd.org (Postfix) with ESMTP id 624BB13C45B for ; Fri, 28 Dec 2007 17:39:51 +0000 (UTC) (envelope-from wahjava@gmail.com) Received: by nz-out-0506.google.com with SMTP id l8so703070nzf.13 for ; Fri, 28 Dec 2007 09:39:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:reply-to:sender:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition:x-google-sender-auth; bh=N4nBxOZ8YHoTa61kv9qdE2yEhJBekqa9+A7jqEMW1dM=; b=ZCIuQ6O/ViFPhB0iT8gLr5DnfqLX9+8pnppNcVnolpaCrKGLzD5CLe3dJg2jp3o/EO1sS62WGD4o96USpRdhLmsaQOkltbTsRbzd1tME5CqCqL1KodKw2J/bIqB2QJyV4f8Yf7uXA57G/2kOiEX26ilIJa7ziG8veensR/CWuYA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:reply-to:sender:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition:x-google-sender-auth; b=SGf5OBAnQsH5O9ULL+nl8BVbjR3sNlGCncPINKrFCOZNpoY9VLFbxkZ4fQ43+ftgpzrutC0kIQzRsBYeg5MpMMbvPTtGLPHrZ6pkPmREns9V83GIYJPhxTw9+P4Wt79wnNiBQlehN77TKePJUqjbBmXyuU88B6D3RwlrS7aje7Q= Received: by 10.142.230.11 with SMTP id c11mr3130859wfh.145.1198863590969; Fri, 28 Dec 2007 09:39:50 -0800 (PST) Received: by 10.142.221.10 with HTTP; Fri, 28 Dec 2007 09:39:50 -0800 (PST) Message-ID: Date: Fri, 28 Dec 2007 23:09:50 +0530 From: "=?UTF-8?Q?=E0=A4=86=E0=A4=B6=E0=A5=80=E0=A4=B7_=E0=A4=B6?= =?UTF-8?Q?=E0=A5=81=E0=A4=95=E0=A5=8D=E0=A4=B2_A?= =?UTF-8?Q?shish_Shukla?=" Sender: wahjava@gmail.com To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: base64 Content-Disposition: inline X-Google-Sender-Auth: ca095f603d5dc8f3 Subject: Kernel crashed due to pagefault while running net/avahi X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: wahjava.ml@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:39:52 -0000 SGkKCkknbSBydW5uaW5nIEZyZWVCU0QgNy4wLUJFVEE0IChBTUQ2NCkgb24gSW50ZWwgUGVudGl1 bSA0IDYzMAooRU02NFQvSFQpIG9uIEludGVsIEQ5NDVHTlRMIG1vdGhlYm9hcmQuIEknZCB0aGlz IGNyYXNoIHdoZW4gSSB3YXMKcnVubmluZyBpbiBHTk9NRSwgcGxheWluZyB3aXRoIEF2YWhpIGFu ZCBuc3NfbWRucyB0byBnZXQgbUROUyBvdmVyCklQdjYgd29ya2luZy4KCi0tLS04PC0tLS04PC0t LS0KW2FiYmVAY2hhdGVhdSB+L2NyYXNoZXNdJCBrZ2RiIC9ib290L2tlcm5lbC9rZXJuZWwgdm1j b3JlLjAKW0dEQiB3aWxsIG5vdCBiZSBhYmxlIHRvIGRlYnVnIHVzZXItbW9kZSB0aHJlYWRzOgov dXNyL2xpYi9saWJ0aHJlYWRfZGIuc286IFVuZGVmaW5lZCBzeW1ib2wgInBzX3BnbG9iYWxfbG9v a3VwIl0KR05VIGdkYiA2LjEuMSBbRnJlZUJTRF0KQ29weXJpZ2h0IDIwMDQgRnJlZSBTb2Z0d2Fy ZSBGb3VuZGF0aW9uLCBJbmMuCkdEQiBpcyBmcmVlIHNvZnR3YXJlLCBjb3ZlcmVkIGJ5IHRoZSBH TlUgR2VuZXJhbCBQdWJsaWMgTGljZW5zZSwgYW5kIHlvdSBhcmUKd2VsY29tZSB0byBjaGFuZ2Ug aXQgYW5kL29yIGRpc3RyaWJ1dGUgY29waWVzIG9mIGl0IHVuZGVyIGNlcnRhaW4gY29uZGl0aW9u cy4KVHlwZSAic2hvdyBjb3B5aW5nIiB0byBzZWUgdGhlIGNvbmRpdGlvbnMuClRoZXJlIGlzIGFi c29sdXRlbHkgbm8gd2FycmFudHkgZm9yIEdEQi4gIFR5cGUgInNob3cgd2FycmFudHkiIGZvciBk ZXRhaWxzLgpUaGlzIEdEQiB3YXMgY29uZmlndXJlZCBhcyAiYW1kNjQtbWFyY2VsLWZyZWVic2Qi LgoKVW5yZWFkIHBvcnRpb24gb2YgdGhlIGtlcm5lbCBtZXNzYWdlIGJ1ZmZlcjoKCgpGYXRhbCB0 cmFwIDEyOiBwYWdlIGZhdWx0IHdoaWxlIGluIGtlcm5lbCBtb2RlCmNwdWlkID0gMDsgYXBpYyBp ZCA9IDAwCmZhdWx0IHZpcnR1YWwgYWRkcmVzcwk9IDB4ZmZmZmZmMDEwMTg4MDUzMApmYXVsdCBj b2RlCQk9IHN1cGVydmlzb3IgcmVhZCBkYXRhLCBwYWdlIG5vdCBwcmVzZW50Cmluc3RydWN0aW9u IHBvaW50ZXIJPSAweDg6MHhmZmZmZmZmZjgwNTk0ZThlCnN0YWNrIHBvaW50ZXIJICAgICAgICA9 IDB4MTA6MHhmZmZmZmZmZmFmMjgwN2MwCmZyYW1lIHBvaW50ZXIJICAgICAgICA9IDB4MTA6MHhm ZmZmZmYwMDAxZmU1NzAwCmNvZGUgc2VnbWVudAkJPSBiYXNlIDB4MCwgbGltaXQgMHhmZmZmZiwg dHlwZSAweDFiCgkJCT0gRFBMIDAsIHByZXMgMSwgbG9uZyAxLCBkZWYzMiAwLCBncmFuIDEKcHJv Y2Vzc29yIGVmbGFncwk9IGludGVycnVwdCBlbmFibGVkLCByZXN1bWUsIElPUEwgPSAwCmN1cnJl bnQgcHJvY2VzcwkJPSA5NTMgKGF2YWhpLWRhZW1vbikKdHJhcCBudW1iZXIJCT0gMTIKcGFuaWM6 IHBhZ2UgZmF1bHQKY3B1aWQgPSAwClVwdGltZTogMWg3bTI3cwpQaHlzaWNhbCBtZW1vcnk6IDIw MjUgTUIKRHVtcGluZyAzMTEgTUI6IDI5NiAyODAgMjY0IDI0OCAyMzIgMjE2IDIwMCAxODQgMTY4 IDE1MiAxMzYgMTIwIDEwNCA4OAo3MiA1NiA0MCAyNCA4CgojMCAgZG9hZHVtcCAoKSBhdCBwY3B1 Lmg6MTk0CjE5NAlwY3B1Lmg6IE5vIHN1Y2ggZmlsZSBvciBkaXJlY3RvcnkuCglpbiBwY3B1LmgK KGtnZGIpIGJ0CiMwICBkb2FkdW1wICgpIGF0IHBjcHUuaDoxOTQKIzEgIDB4MDAwMDAwMDAwMDAw MDAwNCBpbiA/PyAoKQojMiAgMHhmZmZmZmZmZjgwNDUxYzQ2IGluIGJvb3QgKGhvd3RvPTI2MCkg YXQKL3Vzci9zcmMvc3lzL2tlcm4va2Vybl9zaHV0ZG93bi5jOjQwOQojMyAgMHhmZmZmZmZmZjgw NDUyMDcyIGluIHBhbmljIChmbXQ9MHgxMDQgPEFkZHJlc3MgMHgxMDQgb3V0IG9mCmJvdW5kcz4p IGF0IC91c3Ivc3JjL3N5cy9rZXJuL2tlcm5fc2h1dGRvd24uYzo1NjMKIzQgIDB4ZmZmZmZmZmY4 MDcwYmNmYSBpbiB0cmFwX2ZhdGFsIChmcmFtZT0weGZmZmZmZjAwMDM1ODY5YzAsCmV2YT0xODQ0 Njc0Mjk3NDI1NDA4MTEyOCkgYXQgL3Vzci9zcmMvc3lzL2FtZDY0L2FtZDY0L3RyYXAuYzo3MjQK IzUgIDB4ZmZmZmZmZmY4MDcwYzBhMSBpbiB0cmFwX3BmYXVsdCAoZnJhbWU9MHhmZmZmZmZmZmFm MjgwNzEwLAp1c2VybW9kZT0wKSBhdCAvdXNyL3NyYy9zeXMvYW1kNjQvYW1kNjQvdHJhcC5jOjY0 MQojNiAgMHhmZmZmZmZmZjgwNzBjOTVmIGluIHRyYXAgKGZyYW1lPTB4ZmZmZmZmZmZhZjI4MDcx MCkgYXQKL3Vzci9zcmMvc3lzL2FtZDY0L2FtZDY0L3RyYXAuYzo0MTAKIzcgIDB4ZmZmZmZmZmY4 MDZmMzgzZSBpbiBjYWxsdHJhcCAoKSBhdAovdXNyL3NyYy9zeXMvYW1kNjQvYW1kNjQvZXhjZXB0 aW9uLlM6MTY5CiM4ICAweGZmZmZmZmZmODA1OTRlOGUgaW4gaXA2X3NldHBrdG9wdHMgKGNvbnRy b2w9MHhmZmZmZmYwMDAxZmU1NzAwLApvcHQ9MHhmZmZmZmZmZmFmMjgwODcwLCBzdGlja3lvcHQ9 VmFyaWFibGUgInN0aWNreW9wdCIgaXMgbm90CmF2YWlsYWJsZS4KKSBhdCAvdXNyL3NyYy9zeXMv bmV0aW5ldDYvaXA2X291dHB1dC5jOjI4MTMKIzkgIDB4ZmZmZmZmZmY4MDVhNzA4MyBpbiB1ZHA2 X3NlbmQgKHNvPVZhcmlhYmxlICJzbyIgaXMgbm90IGF2YWlsYWJsZS4KKSBhdCAvdXNyL3NyYy9z eXMvbmV0aW5ldDYvdWRwNl91c3JyZXEuYzo1MjMKIzEwIDB4ZmZmZmZmZmY4MDRhMGU3NyBpbiBz b3NlbmRfZ2VuZXJpYyAoc289MHhmZmZmZmYwMDAzMzY1YWUwLAphZGRyPTB4ZmZmZmZmMDAwMzAy OTU2MCwgdWlvPTB4ZmZmZmZmZmZhZjI4MGEzMCwKdG9wPTB4ZmZmZmZmMDAwMzRiMzEwMCwgY29u dHJvbD0weGZmZmZmZjAwMDFmZTU3MDAsIGZsYWdzPVZhcmlhYmxlCiJmbGFncyIgaXMgbm90IGF2 YWlsYWJsZS4KKQogICAgYXQgL3Vzci9zcmMvc3lzL2tlcm4vdWlwY19zb2NrZXQuYzoxMjQwCiMx MSAweGZmZmZmZmZmODA0YTM4NjYgaW4ga2Vybl9zZW5kaXQgKHRkPTB4ZmZmZmZmMDAwMzU4Njlj MCwgcz0xNiwKbXA9MHhmZmZmZmZmZmFmMjgwYWYwLCBmbGFncz0wLCBjb250cm9sPTB4ZmZmZmZm MDAwMWZlNTcwMCwKc2VnZmxnPVZhcmlhYmxlICJzZWdmbGciIGlzIG5vdCBhdmFpbGFibGUuCikg YXQgL3Vzci9zcmMvc3lzL2tlcm4vdWlwY19zeXNjYWxscy5jOjc4OQojMTIgMHhmZmZmZmZmZjgw NGE2MzQzIGluIHNlbmRpdCAodGQ9MHhmZmZmZmYwMDAzNTg2OWMwLCBzPTE2LAptcD0weGZmZmZm ZmZmYWYyODBhZjAsIGZsYWdzPTApIGF0Ci91c3Ivc3JjL3N5cy9rZXJuL3VpcGNfc3lzY2FsbHMu Yzo3MzAKIzEzIDB4ZmZmZmZmZmY4MDRhNjNiNCBpbiBzZW5kbXNnICh0ZD0weGZmZmZmZjAwMDM1 ODY5YzAsCnVhcD0weGZmZmZmZmZmYWYyODBiZTApIGF0IC91c3Ivc3JjL3N5cy9rZXJuL3VpcGNf c3lzY2FsbHMuYzo5MjIKIzE0IDB4ZmZmZmZmZmY4MDcwYzMwYyBpbiBzeXNjYWxsIChmcmFtZT0w eGZmZmZmZmZmYWYyODBjNzApIGF0Ci91c3Ivc3JjL3N5cy9hbWQ2NC9hbWQ2NC90cmFwLmM6ODUy CiMxNSAweGZmZmZmZmZmODA2ZjNhNGIgaW4gWGZhc3Rfc3lzY2FsbCAoKSBhdAovdXNyL3NyYy9z eXMvYW1kNjQvYW1kNjQvZXhjZXB0aW9uLlM6MjkwCiMxNiAweDAwMDAwMDA4MDExYzExNGMgaW4g Pz8gKCkKUHJldmlvdXMgZnJhbWUgaW5uZXIgdG8gdGhpcyBmcmFtZSAoY29ycnVwdCBzdGFjaz8p CihrZ2RiKSBmcmFtZSA4CiM4ICAweGZmZmZmZmZmODA1OTRlOGUgaW4gaXA2X3NldHBrdG9wdHMg KGNvbnRyb2w9MHhmZmZmZmYwMDAxZmU1NzAwLApvcHQ9MHhmZmZmZmZmZmFmMjgwODcwLCBzdGlj a3lvcHQ9VmFyaWFibGUgInN0aWNreW9wdCIgaXMgbm90CmF2YWlsYWJsZS4KKSBhdCAvdXNyL3Ny Yy9zeXMvbmV0aW5ldDYvaXA2X291dHB1dC5jOjI4MTMKMjgxMwkJCWNtID0gbXRvZChjb250cm9s LCBzdHJ1Y3QgY21zZ2hkciAqKTsKKGtnZGIpIHByaW50IGNvbnRyb2wKJDIgPSAoc3RydWN0IG1i dWYgKikgMHhmZmZmZmYwMDAxZmU1NzAwCi0tLS0+OC0tLS0+OC0tLS0KClRoZSBjcmFzaGR1bXAg aXMgMzExIE1pQiwgYW5kIGFmdGVyIGJ6aXAyLWluZyBpdCBjb21lcyB0byBhcm91bmQgNTUKTWlC LCB3aGljaCBpcyBzdGlsbCB0b28gYmlnIGZvciBtZSB0byB1cGxvYWQgaXQgc29tZXdoZXJlLiBB bnkgb3RoZXIKdGhpbmcgSSBjYW4gZG8gdG8gaGVscCBkZXZlbG9wZXJzIHRyb3VibGVzaG9vdCB0 aGlzIHByb2JsZW0sIHBsZWFzZQpsZXQgbWUga25vdyA/CgpXaWxsIEZyZWVCU0QgNy4wLVJFTEVB U0UgYmUgcmVjb21tZW5kZWQgZm9yIHByb2R1Y3Rpb24gc3lzdGVtcy4gSSdtCnRoaW5raW5nIHRv IHVzZSBpdCBmb3IgbXkgdGhpcyBtYWNoaW5lICh3aGljaCBpcyB0aGlzIGRlc2t0b3ApLiBJJ20K dGhpbmtpbmcgdG8gc3dpdGNoIHRvIEZyZWVCU0QgZnVsbHRpbWUsIGlzIEZyZWVCU0QgNy4wIHJl Y29tbWVuZGVkID8KClRJQQotLSAKQXNoaXNoIFNodWtsYSDgpIbgpLbgpYDgpLcg4KS24KWB4KSV 4KWN4KSyICAgICAgICAgICAgICAgICAgICAgIGh0dHA6Ly93YWhqYXZhLndvcmRwcmVzcy5jb20v CsK3LS0gwrctIMK3wrfCt8K3IMK3LS0tIMK3LSDCt8K3wrctIMK3LSDCty0twrctwrcgLS3CtyAt LSDCty0gwrfCtyDCty3Ct8K3IMK3LcK3LcK3LSAtwrctwrcgLS0tIC0tCg== From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 17:54:24 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EC14316A418 for ; Fri, 28 Dec 2007 17:54:24 +0000 (UTC) (envelope-from dave.list@pixelhammer.com) Received: from smtp2.tls.net (smtp2.tls.net [65.196.224.83]) by mx1.freebsd.org (Postfix) with ESMTP id 72A2513C457 for ; Fri, 28 Dec 2007 17:54:24 +0000 (UTC) (envelope-from dave.list@pixelhammer.com) Received: (qmail 8929 invoked from network); 28 Dec 2007 17:54:23 -0000 Received: by simscan 1.2.3 ppid: 8919, pid: 8925, t: 0.1371s scanners: attach: 1.2.3 clamav: 0.91.1/m:45 spam: 3.2.1 X-Spam-Checker-Version: SpamAssassin 3.2.1 (2007-05-02) on smtp-2.tls.net X-Spam-Level: X-Spam-Status: No, score=0.2 required=20.0 tests=ALL_TRUSTED,TVD_RCVD_IP autolearn=disabled version=3.2.1 Received: from 208-70-40-123.bb.hrtc.net (HELO ?192.168.0.109?) (ldg%tls.net@208.70.40.123) by auth-smtp2.tls.net with ESMTPA; 28 Dec 2007 17:54:23 -0000 Message-ID: <477538C2.3070204@pixelhammer.com> Date: Fri, 28 Dec 2007 12:56:18 -0500 From: DAve User-Agent: Thunderbird 2.0.0.6 (Windows/20070728) MIME-Version: 1.0 To: 'User Questions' Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Small Unix install X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 17:54:25 -0000 Good morning, I am looking for a small install for an old laptop. I have an old but quite reliable Toshiba 330CDT that used to be my personal laptop. I ran FBSD 3.x/4.x on it for years but it has been wiped and in a closet for years. I want to use it again just to access a few web forums and read my email. I don't do POV RAY or 3D, I don't need Open Office, I don't watch any Tubes. Mutt, Fluxbox and a minimal browser would make me happy. I don't have the time or inclination to roll my own again. PCBSD can't finish the install due to only having 96mb of memory. Desktop BSD wants more than 4gb of drive space just to complete the install. I currently have 98SE on it only consuming 300mb and it runs fine, but it's 98SE ;^) Does anyone know of anything ready to install? BSD, Linux, I don't care. Thanks, DAve -- Google finally, after 7 years, provided a logo for veterans. Thank you Google. What to do with my signature now? From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:07:10 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9D1AD16A418 for ; Fri, 28 Dec 2007 18:07:10 +0000 (UTC) (envelope-from tankko@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id 5CD3013C442 for ; Fri, 28 Dec 2007 18:07:10 +0000 (UTC) (envelope-from tankko@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5957314waf.3 for ; Fri, 28 Dec 2007 10:07:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; bh=O1miPjqpqcaizghU7vTT4Ghj2fT7WvO/POxSbXyVcaM=; b=Eq0Me3v9RGH0r6vwdT6kxh0v4znVg712bYk/AQ6q9Uxt11Y3DTWRkzEo+znLHwhxv18Tf4lCJ400/HVEZThMWDz+UhS2z5bcbmK5VRAqIesvd9T5DlIOUVxypXWec5gjPubqyZLNL1oXNwlTyMD6hrS5F0cX/aFz+ELM0P2QO7Q= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=m+bXfRRt20bS1i688lgZpc/FG8D4TGyFK5K4IY6CwtdG/GBnapunTn+zb4TSLMpm4LIfogBus8qsgofQCIRM7+wIqsghdk9rg9BYaKHtokfJKBEBquwaI0VrAQ5W8QGuxWvjdowAcf2zps4BFgU8+u0PiuHLZw/YLFOXEhPRC88= Received: by 10.114.202.15 with SMTP id z15mr9419699waf.72.1198863618924; Fri, 28 Dec 2007 09:40:18 -0800 (PST) Received: by 10.115.16.4 with HTTP; Fri, 28 Dec 2007 09:40:18 -0800 (PST) Message-ID: <7fec743f0712280940h3943aa00o6f277b0b8c4a172e@mail.gmail.com> Date: Fri, 28 Dec 2007 09:40:18 -0800 From: Tankko To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: apache portupgrade conflicts with apr-db43 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:07:10 -0000 I am upgrading apache... apache-2.2.6_2 < needs updating (port has 2.2.6_3) ...and I get the following error: ---> Installing the new version via the port ===> Installing for apache-2.2.6_3 ===> apache-2.2.6_3 conflicts with installed package(s): apr-db43-1.2.8_2 They install files into the same place. Please remove them first with pkg_delete(1). *** Error code 1 apr-db43-1.2.8_2 is needed by subversion-1.4.4_1 Why is this happening and what do I need to do to correct it. I figured I'd ask here before I blindly started removing ports. I am running FreeBSD 6.2-RELEASE Thanks, Tankko From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:21:26 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2846916A419 for ; Fri, 28 Dec 2007 18:21:26 +0000 (UTC) (envelope-from mon.si@gmx.net) Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by mx1.freebsd.org (Postfix) with SMTP id 5FB6813C459 for ; Fri, 28 Dec 2007 18:21:25 +0000 (UTC) (envelope-from mon.si@gmx.net) Received: (qmail 20792 invoked by uid 0); 28 Dec 2007 17:54:44 -0000 Received: from 81.163.38.157 by www118.gmx.net with HTTP; Fri, 28 Dec 2007 18:54:44 +0100 (CET) Content-Type: text/plain; charset="iso-8859-1" Date: Fri, 28 Dec 2007 18:54:44 +0100 From: "Mon Si" Message-ID: <20071228175444.93100@gmx.net> MIME-Version: 1.0 To: freebsd-questions@freebsd.org, freebsd-ports@freebsd.org X-Authenticated: #20452226 X-Flags: 0001 X-Mailer: WWW-Mail 6100 (Global Message Exchange) X-Priority: 3 X-Provags-ID: V01U2FsdGVkX18ik/hWk3Yiy+sFl1n6NKya5dps0pQqwENUJHv5JF iVTpvaJOvW9cFrfT3eI8eXPdiRns0Fj6EdfA== Content-Transfer-Encoding: 8bit X-GMX-UID: UApCcDddbGInbvtlVWVnxxdvcmZ1Zty4 Cc: Subject: pkg_delete: package 'xorg-drivers-7.3' doesn't have a prefix X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:21:26 -0000 Dear list, I'm experiencing problems when I try to portupgrade the xorg-driver port. The old version of the port can't be uninstalled during the portupgrade due to an undefined prefix. The port can't be deleted by "pkg_delete -f xorg-drivers-7.3" Does anybody know how to upgrade / remove this port? Thanks in advance, Simon -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:25:30 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8816F16A419 for ; Fri, 28 Dec 2007 18:25:30 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from betty.computinginnovations.com (mail.computinginnovations.com [64.81.227.250]) by mx1.freebsd.org (Postfix) with ESMTP id 192EE13C45A for ; Fri, 28 Dec 2007 18:25:29 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from p28.computinginnovations.com (dhcp-10-20-30-100.computinginnovations.com [10.20.30.100]) (authenticated bits=0) by betty.computinginnovations.com (8.13.8/8.13.8) with ESMTP id lBSIOwKS002209; Fri, 28 Dec 2007 12:24:59 -0600 (CST) (envelope-from derek@computinginnovations.com) Message-Id: <6.0.0.22.2.20071228122316.02469808@mail.computinginnovations.com> X-Sender: derek@mail.computinginnovations.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Fri, 28 Dec 2007 12:24:50 -0600 To: Andrew Falanga , FreeBSD Questions From: Derek Ragona In-Reply-To: <200712281033.40654.af300wsm@gmail.com> References: <200712281033.40654.af300wsm@gmail.com> Mime-Version: 1.0 X-ComputingInnovations-MailScanner-Information: Please contact the ISP for more information X-ComputingInnovations-MailScanner: Found to be clean X-ComputingInnovations-MailScanner-From: derek@computinginnovations.com X-Spam-Status: No Content-Type: text/plain; charset="us-ascii"; format=flowed X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: How to make sendmail listen on an address other than the loopback X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:25:30 -0000 At 11:33 AM 12/28/2007, Andrew Falanga wrote: >Hi, > >I'm trying to get an e-mail system working for my church >(whitneybaptist.org). >I've added a file called local-host-names in /etc/mail as described in the >Handbook, then did "/etc/rc.d/sendmail restart" and then did "sockstat | grep >sendmail" and got the following results: > >root sendmail 32889 3 tcp4 127.0.0.1:25 *:* >root sendmail 32889 4 dgram -> /var/run/logpriv >smmsp sendmail 696 3 dgram -> /var/run/log > > >Now, with the exception of the additional file, nothing has been done to this >stock sendmail configuration (system is 6.2-RELEASE-p7). How would I make >sendmail listen on the ip of 192.168.2.23? I do have some experience with >sendmail, however, it was several years ago and I've forgotten quite a bit. >Why isn't it listening on that address now? > >Andy Take a look at your settings for sendmail in /etc/rc.conf vs /etc/default/rc.conf You need two instances of sendmail running, one for local delivery, another for external mail send receive. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:29:23 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C949B16A421 for ; Fri, 28 Dec 2007 18:29:23 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.183]) by mx1.freebsd.org (Postfix) with ESMTP id 837FC13C455 for ; Fri, 28 Dec 2007 18:29:23 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5967900waf.3 for ; Fri, 28 Dec 2007 10:29:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=RPW3mKkCX+qJlq4o022Tyo7neP2Zxw4DVBcpzRO48yo=; b=XjrctGUe/RhM9K6KidHeWdIwKYTdY0NRXSsAU/dnlZhyDwdclv0eAJBO71ZieHROTIgUbtJRVGqT0tJMtv7WbXO5K/tgPdgvwJZtWVO7IGyXqDNTnKnK47ecNK4SbUL/hkImOFBlnQlk8ZeinPb778Qh56rt3CguZzgSK5dkbkI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=fZGH3uLU3hA1u+TkOngVeo0hSag/9TP+LWUNOGYsYSwp4SuGHcRxBzMXC5+ybN4R5AUDXS+VKJ2kycphrPcGzCpe3qLS6KTifzZ5s0c7erTui2+oJncxvVXbvvegilBB8q2cmvuS0BjGL00vHZH1+3t8F2UdTtiGXhCIVEOjEmc= Received: by 10.115.108.1 with SMTP id k1mr9627332wam.141.1198866562926; Fri, 28 Dec 2007 10:29:22 -0800 (PST) Received: from sniper ( [71.221.173.206]) by mx.google.com with ESMTPS id c26sm16004000waa.58.2007.12.28.10.29.21 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 28 Dec 2007 10:29:22 -0800 (PST) From: Andrew Falanga To: Peter Schuller Date: Fri, 28 Dec 2007 11:29:15 -0700 User-Agent: KMail/1.9.6 References: <200712261534.03553.af300wsm@gmail.com> <200712270013.58919.peter.schuller@infidyne.com> In-Reply-To: <200712270013.58919.peter.schuller@infidyne.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712281129.15900.af300wsm@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: dovecot questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:29:23 -0000 On Wednesday 26 December 2007 16:13:50 Peter Schuller wrote: > > Dovecot doesn't really care. You provide the method of obtaining the user > list from the database, in the form of SQL statements (assuming they differ > from defaults), and it's up to you to make sure this returns the > appropriate information (so in other words, dovecot doesn't add users for > you). > > I used to run a pg+dovecot+postfix, but have since moved away from it and I > don't have the configs easily accessible to check out specifics. But > googling, this should be useful in terms of providing a bunch of real-world > configuration examples: > > http://www.gjdv.at/snippets/linux/virtual_mail_hosting Thanks for this link. I think it will be helpful, though at this point, I'm overwhelmed. > > > Also, with respect to the configuration file (dovecot.conf) why are there > > so many passdb/userdb? If I have passdb sql "turned on", should I "turn > > off" all other passdb sections? What is the significance of the userdb > > static { } section in that file? It appears that it is necessary for use > > if using a single user to access several mailboxes (i.e. virtual users > > which is what I want to implement). Is this true? > > I can't answer each one of the above off hand, but things like uids is > controlled by the user database that it sounds like you want to keep in > PostgreSQL. This includes the ability to set the uid/gid, which you can > have different for each user, the same, or some combination thereof, on a > per-user basis. Your exact table design is up to you, as long as you can > give dovecot the appropriate SQL statements for obtaining relevant > information. Ok, if I may run this by you, I've made a user id for this virtual mail stuff, the virtual mail user is "vmail." Yes I know, very inventive. The users home directory is /usr/home/vmail, but I'm thinking that what dovecot cares about is where mail is stored. In this case, I'm pretty sure it's /var/mail/vmail. I've followed the instructions in http://wiki.dovecot.org/AuthDatabase/SQL and created the table as defined on this page. If my understaning is correct, this field will contain the entry "/var/mail/vmail," correct? Further, if I'm following, dovecot somehow delivers all mails to this virtual user and somehow categorizes them according to the virtual users? Does this sound correct? I wonder, sometimes attachments get large, if I'm anywhere near correct, I wonder if I should use a directory under /usr instead of /var? > > > If I'm understanding things correctly, the next, very important item, is > > how do I setup new users and how would those users then manage things > > like passwords, etc.? > > This is up to you. dovecot does not provide and user interfaces for > managing accounts (that I am aware of). Typically a reason to have the user > database in a relational database would be to enable the construction of > such interfaces, or perhaps use of existing tools. But unless I am missing > something, user management is beyond the scope of what dovecot itself is > providing. Ok, that makes it simpler though some additional work for me coming up with an easy way to add people to the list. Thanks for all the help. Andy From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:30:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A10FF16A46C for ; Fri, 28 Dec 2007 18:30:03 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from ns1.jnielsen.net (ns1.jnielsen.net [69.55.238.237]) by mx1.freebsd.org (Postfix) with ESMTP id 65D8F13C469 for ; Fri, 28 Dec 2007 18:30:03 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from ns1.jnielsen.net (jn@ns1 [69.55.238.237]) by ns1.jnielsen.net (8.12.9p2/8.12.9) with ESMTP id lBSIU3XL081415; Fri, 28 Dec 2007 13:30:03 -0500 (EST) (envelope-from lists@jnielsen.net) Received: (from www@localhost) by ns1.jnielsen.net (8.12.9p2/8.12.9/Submit) id lBSIU3XP081414; Fri, 28 Dec 2007 13:30:03 -0500 (EST) (envelope-from lists@jnielsen.net) X-Authentication-Warning: ns1.jnielsen.net: www set sender to lists@jnielsen.net using -f Received: from nc-2wac-zop01.wachovia.com (nc-2wac-zop01.wachovia.com [162.111.235.34]) by newwebmail.jnielsen.net (Horde MIME library) with HTTP; Fri, 28 Dec 2007 13:30:02 -0500 Message-ID: <20071228133002.6u0muqaqokkc4wws@newwebmail.jnielsen.net> Date: Fri, 28 Dec 2007 13:30:02 -0500 From: John Nielsen To: DAve References: <477538C2.3070204@pixelhammer.com> In-Reply-To: <477538C2.3070204@pixelhammer.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: 7bit User-Agent: Internet Messaging Program (IMP) H3 (4.0.4) / FreeBSD-4.9 X-Virus-Scanned: ClamAV version 0.88.4, clamav-milter version 0.88.4 on ns1.jnielsen.net X-Virus-Status: Clean Cc: 'User Questions' Subject: Re: Small Unix install X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:30:03 -0000 Quoting DAve : > I am looking for a small install for an old laptop. I have an old but > quite reliable Toshiba 330CDT that used to be my personal laptop. I ran > FBSD 3.x/4.x on it for years but it has been wiped and in a closet for > years. I want to use it again just to access a few web forums and read > my email. I don't do POV RAY or 3D, I don't need Open Office, I don't > watch any Tubes. Mutt, Fluxbox and a minimal browser would make me happy. > > I don't have the time or inclination to roll my own again. PCBSD can't > finish the install due to only having 96mb of memory. Desktop BSD wants > more than 4gb of drive space just to complete the install. > > I currently have 98SE on it only consuming 300mb and it runs fine, but > it's 98SE ;^) Does anyone know of anything ready to install? BSD, Linux, > I don't care. Is there a reason a standard installation of FreeBSD 4/6/7 won't work for you? Just do a minimal install of the OS from CD or network then install [parts of] X, fluxbox, and your other apps from ports or packages and away you go. You could weigh the benefits [possible memory savings] of compiling your own kernel against the time and disk space required, but you shouldn't ever have to build world or ports unless you feel so inclined, especially now that freebsd-update is part of the base system. JN From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 18:59:03 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3DAD316A46B for ; Fri, 28 Dec 2007 18:59:03 +0000 (UTC) (envelope-from stephen@math.missouri.edu) Received: from cauchy.math.missouri.edu (cauchy.math.missouri.edu [128.206.184.213]) by mx1.freebsd.org (Postfix) with ESMTP id 7326713C47E for ; Fri, 28 Dec 2007 18:59:02 +0000 (UTC) (envelope-from stephen@math.missouri.edu) Received: from laptop2.gateway.2wire.net (cauchy.math.missouri.edu [128.206.184.213]) by cauchy.math.missouri.edu (8.14.2/8.14.1) with ESMTP id lBSIkxrL081540; Fri, 28 Dec 2007 12:47:00 -0600 (CST) (envelope-from stephen@math.missouri.edu) Message-ID: <477544BC.4070009@math.missouri.edu> Date: Fri, 28 Dec 2007 12:47:24 -0600 From: Stephen Montgomery-Smith User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.11) Gecko/20071221 SeaMonkey/1.1.7 MIME-Version: 1.0 To: Mon Si References: <20071228175444.93100@gmx.net> In-Reply-To: <20071228175444.93100@gmx.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org, freebsd-ports@freebsd.org Subject: Re: pkg_delete: package 'xorg-drivers-7.3' doesn't have a prefix X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 18:59:03 -0000 Mon Si wrote: > Dear list, > > I'm experiencing problems when I try to portupgrade the xorg-driver > port. The old version of the port can't be uninstalled during the > portupgrade due to an undefined prefix. > The port can't be deleted by "pkg_delete -f xorg-drivers-7.3" > > Does anybody know how to upgrade / remove this port? > > Thanks in advance, > Simon If nothing else works, you could try rm -rf /var/db/pkg/xorg-drivers-7.3 From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 19:09:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D784916A418 for ; Fri, 28 Dec 2007 19:09:15 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id 9479913C45A for ; Fri, 28 Dec 2007 19:09:15 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so5987773waf.3 for ; Fri, 28 Dec 2007 11:09:15 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=FPF8Iu7di3rNJnmsw5PNmJQ0nOztiWlnNII9ZC4KfsM=; b=bqkAkjafEy0ExyuKoC4Ou1TQhbcacZDOkUdBJ3bEe2qN+6gyTQTloEjjJmXFrOVEDrBJUkcTwl57o02rRLASeiOb0+rRBAT0RsrhaDBHHjqN5WkuAb2XdukxyKO3eiNxJ/Km9v8xjQtM2b96BRV3EbFCpGPWc0UPMoGU6Wzrz+I= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=h0fMnvPKwG706NvNFNQriblv6Wdk7rL87R6ugl10EkgPAgFvQJXPj1JZuAPgi2yJa+BdTKFP+VOzlONZX7tZdO7UlzMeOsE+uU0yPx+lf2/RFRc/BbjUPYoDrXrBtRxaf1byVmmjQflL6FtSjcBOzS+o2k7A3pY0V5x4t9QlsTM= Received: by 10.114.25.3 with SMTP id 3mr9830769way.22.1198868955320; Fri, 28 Dec 2007 11:09:15 -0800 (PST) Received: by 10.114.47.12 with HTTP; Fri, 28 Dec 2007 11:09:15 -0800 (PST) Message-ID: <839aec700712281109m115aaef1tb09a2c5af165b6f4@mail.gmail.com> Date: Fri, 28 Dec 2007 12:09:15 -0700 From: "Darren Spruell" To: DAve In-Reply-To: <477538C2.3070204@pixelhammer.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <477538C2.3070204@pixelhammer.com> Cc: User Questions Subject: Re: Small Unix install X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 19:09:15 -0000 On Dec 28, 2007 10:56 AM, DAve wrote: > Good morning, > > I am looking for a small install for an old laptop. I have an old but > quite reliable Toshiba 330CDT that used to be my personal laptop. I ran > FBSD 3.x/4.x on it for years but it has been wiped and in a closet for > years. I want to use it again just to access a few web forums and read > my email. I don't do POV RAY or 3D, I don't need Open Office, I don't > watch any Tubes. Mutt, Fluxbox and a minimal browser would make me happy. > > I don't have the time or inclination to roll my own again. PCBSD can't > finish the install due to only having 96mb of memory. Desktop BSD wants > more than 4gb of drive space just to complete the install. > > I currently have 98SE on it only consuming 300mb and it runs fine, but > it's 98SE ;^) Does anyone know of anything ready to install? BSD, Linux, > I don't care. Yes, there's plenty of options for very small Unix installs. Those you've tried have been the modern desktop-oriented distributions of FreeBSD and they of course don't shoot for the older class of systems. Unix has resisted bloat For example, I've put a smaller OpenBSD build on my Soekris that I run for a firewall on my cable connection. Fits in 22 MB: # df -h Filesystem Size Used Avail Capacity Mounted on /dev/wd0a 236M 22.1M 202M 10% / Granted your desktop build will be plenty larger, but 300 MB is certainly achievable. Follow the advice for a minimal installation of the vanilla FreeBSD 6.x or 7 + whatever packages you need and you'll be rolling. You can find similar options in any of the BSDs and GNU/Linux. DS From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 19:50:40 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4A3CA16A417 for ; Fri, 28 Dec 2007 19:50:40 +0000 (UTC) (envelope-from mnslinky@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.freebsd.org (Postfix) with ESMTP id E3C6613C47E for ; Fri, 28 Dec 2007 19:50:39 +0000 (UTC) (envelope-from mnslinky@gmail.com) Received: by py-out-1112.google.com with SMTP id u77so6701408pyb.3 for ; Fri, 28 Dec 2007 11:50:39 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:cc:message-id:from:to:in-reply-to:content-type:content-transfer-encoding:mime-version:subject:date:references:x-mailer; bh=A2+eHEqxN0etKv6WtLXqinLOMgjOd3nJ1PR1FzZF3qs=; b=g5YZuXIgewitsH1ku5uWa6nfJm1L/62KPhfawJ/Q6zoEM0AEChHgF7q4UpqM1nY2Sem1bGmsYM5yzsn/zJgpiP5Sm7MKjkBHHHwej093Rlm7pRgOTTYIxOBI8ThQe8Rl2uXq0JTGLLQwjh9USTofnnMYeTTOZRHkL+kIOHKj5xA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=cc:message-id:from:to:in-reply-to:content-type:content-transfer-encoding:mime-version:subject:date:references:x-mailer; b=ltlZdTzaqUJ8+IV01aQAyFZNOE0RjXDGDl68dtzye8A16ZSuMM9e/4tIaBbnwSBEBRbR5Ml0oj4c7TWVaj6epI3PLxznG22wloLA4VYMLkU2DhFLle3tMLKc1c825kUeZp5x30OAZWGe0PQDyQgxefddu2D7P1VRWHpwUECv/+Q= Received: by 10.35.96.11 with SMTP id y11mr11326327pyl.44.1198871439313; Fri, 28 Dec 2007 11:50:39 -0800 (PST) Received: from swordfish.local.claimlynx.com ( [74.95.66.25]) by mx.google.com with ESMTPS id n44sm32396842pyh.26.2007.12.28.11.50.38 (version=SSLv3 cipher=OTHER); Fri, 28 Dec 2007 11:50:38 -0800 (PST) Message-Id: <584BD35A-01ED-495C-B579-1507C0444E3E@gmail.com> From: Eric Crist To: Stephen Montgomery-Smith In-Reply-To: <477544BC.4070009@math.missouri.edu> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v915) Date: Fri, 28 Dec 2007 13:50:37 -0600 References: <20071228175444.93100@gmx.net> <477544BC.4070009@math.missouri.edu> X-Mailer: Apple Mail (2.915) Cc: Mon Si , freebsd-ports@freebsd.org, freebsd-questions@freebsd.org Subject: Re: pkg_delete: package 'xorg-drivers-7.3' doesn't have a prefix X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 19:50:40 -0000 On Dec 28, 2007, at 12:47 PM, Stephen Montgomery-Smith wrote: > Mon Si wrote: >> Dear list, >> I'm experiencing problems when I try to portupgrade the xorg-driver >> port. The old version of the port can't be uninstalled during the >> portupgrade due to an undefined prefix. >> The port can't be deleted by "pkg_delete -f xorg-drivers-7.3" >> Does anybody know how to upgrade / remove this port? >> Thanks in advance, >> Simon > > If nothing else works, you could try > rm -rf /var/db/pkg/xorg-drivers-7.3 If I remember correctly, there are detailed instructions in /usr/ports/ UPDATING -- go back to notes for sometime in May of 2007, and there's a really long entry on upgraded to Xorg 7.x from 6.9. I think the entry specifically mentions 7.2, but it should work for 7.3 as well. HTH ----- Eric F Crist Secure Computing Networks From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 19:51:07 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7331916A469 for ; Fri, 28 Dec 2007 19:51:07 +0000 (UTC) (envelope-from b_oshea@yahoo.com) Received: from web39509.mail.mud.yahoo.com (web39509.mail.mud.yahoo.com [209.191.106.93]) by mx1.freebsd.org (Postfix) with SMTP id 10BF113C4F8 for ; Fri, 28 Dec 2007 19:51:06 +0000 (UTC) (envelope-from b_oshea@yahoo.com) Received: (qmail 35520 invoked by uid 60001); 28 Dec 2007 19:51:06 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=uyBwxGFe5vD2DKy6MIvbHv7TAbcSLAJqz49nit3QWsPK33UqJJridKwFb0kh7XtD+MOXtJ/rkctqwj3uiJN65VCnA630FmMHKDXkU3J1BDmWVERuTIwSsnI/JMORabhsCqvwUL4wLiQorMjtBmJFmIhro8hLVfY/mzq/RnFSSWY=; X-YMail-OSG: nI7XgzQVM1lwhDnqKON9tmvTf8JvKPbwIGQDnAclnGq2WGlFDwWm8Hnw6CkhsX3QK6BlQa8MRfIjurVM6jA8VuRwZZb_Qy4GgTL9GikNF7zPKHbhQj4- Received: from [67.170.228.141] by web39509.mail.mud.yahoo.com via HTTP; Fri, 28 Dec 2007 11:51:06 PST Date: Fri, 28 Dec 2007 11:51:06 -0800 (PST) From: Brian O'Shea To: Kris Kennaway In-Reply-To: <4774E1B8.1080500@FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Message-ID: <89106.34681.qm@web39509.mail.mud.yahoo.com> Cc: FreeBSD Questions Subject: Re: buildkernel with INVARIANTS, WITNESS, DEBUG_LOCKS, etc. fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 19:51:07 -0000 Thank you for your reply, Kris. --- Kris Kennaway wrote: > > Brian O'Shea wrote: > > Hello FreeBSD developers, > > > > Building a FreeBSD 6.2-RELEASE kernel on an Intel Pentium 4 with the > > following config options causes buildkernel to fail with undefined > > references to stack_save, stack_zero, and stack_print functions: > > > > makeoptions DEBUG=-g options KDB options DDB > > options INVARIANTS > > options INVARIANT_SUPPORT > > options WITNESS > > options DEBUG_LOCKS > > options DEBUG_VFS_LOCKS > > options DIAGNOSTIC > > ... > I think you also need DDB. I added the KDB and DDB options and now the buildkernel succeeds. Now hopefully I can get a crash dump and (try to) start debuging my problem. > This is a minor bug which you could send-pr about if you like. Would this be a docs bug, or a config bug? Thanks, -brian ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 20:19:44 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B2AA816A417 for ; Fri, 28 Dec 2007 20:19:44 +0000 (UTC) (envelope-from bri@brianwhalen.net) Received: from entwistle.sonicboom.org (entwistle.sonicboom.org [66.93.34.170]) by mx1.freebsd.org (Postfix) with ESMTP id 86B4313C458 for ; Fri, 28 Dec 2007 20:19:44 +0000 (UTC) (envelope-from bri@brianwhalen.net) Received: from [127.0.0.1] (entwistle.sonicboom.org [66.93.34.170]) by entwistle.sonicboom.org (8.14.2/8.14.1) with ESMTP id lBSKJiEw067593 for ; Fri, 28 Dec 2007 12:19:44 -0800 (PST) (envelope-from bri@brianwhalen.net) Message-ID: <47755A60.6030301@brianwhalen.net> Date: Fri, 28 Dec 2007 12:19:44 -0800 From: Brian User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20071218040802.GB6678@ayn.mi.celestial.com> <20071218054048.6EE7.A38C9147@seibercom.net> <20071228171733.GB89701@demeter.hydra> In-Reply-To: <20071228171733.GB89701@demeter.hydra> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: SSH through port forwarding X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 20:19:44 -0000 Chad Perrin wrote: > On Tue, Dec 18, 2007 at 05:44:11AM -0500, Gerard Seibert wrote: > >>> On December 18, 2007 at 12:47AM sham khalil wrote: >>> >>> once you open port 22 to public ip, you'll get people try to bruteforce your >>> machine. >>> if you don't want that set sshd to listen to a higher number like 5522 >>> then forward port 5522 from the router to the internal machines. >>> >>> unfortunately for wrt54g, you can't forward port 5522 to 22 for internal >>> machine. >>> >> Security through obscurity is a poor substitute for security. Port scanners >> will eventually find that port also. >> > > One needs something else for security against brute-force attempts, but > changing the port number does help cut down on the amount of bandwidth > consumption on the LAN side of your router by allowing the router to > ignore/deny all incoming traffic on port 22. > > Has denyhosts been considered? Brian From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 20:25:54 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 08DE716A421 for ; Fri, 28 Dec 2007 20:25:54 +0000 (UTC) (envelope-from dave.list@pixelhammer.com) Received: from smtp2.tls.net (smtp2.tls.net [65.196.224.83]) by mx1.freebsd.org (Postfix) with ESMTP id ADCCB13C4D9 for ; Fri, 28 Dec 2007 20:25:53 +0000 (UTC) (envelope-from dave.list@pixelhammer.com) Received: (qmail 17839 invoked from network); 28 Dec 2007 20:25:52 -0000 Received: by simscan 1.2.3 ppid: 17827, pid: 17835, t: 0.1509s scanners: attach: 1.2.3 clamav: 0.91.1/m:45 spam: 3.2.1 X-Spam-Checker-Version: SpamAssassin 3.2.1 (2007-05-02) on smtp-2.tls.net X-Spam-Level: X-Spam-Status: No, score=0.2 required=20.0 tests=ALL_TRUSTED,TVD_RCVD_IP autolearn=disabled version=3.2.1 Received: from 208-70-40-123.bb.hrtc.net (HELO ?192.168.0.109?) (ldg%tls.net@208.70.40.123) by auth-smtp2.tls.net with ESMTPA; 28 Dec 2007 20:25:52 -0000 Message-ID: <47755C44.3060904@pixelhammer.com> Date: Fri, 28 Dec 2007 15:27:48 -0500 From: DAve User-Agent: Thunderbird 2.0.0.6 (Windows/20070728) MIME-Version: 1.0 To: 'User Questions' References: <477538C2.3070204@pixelhammer.com> <20071228133002.6u0muqaqokkc4wws@newwebmail.jnielsen.net> In-Reply-To: <20071228133002.6u0muqaqokkc4wws@newwebmail.jnielsen.net> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: Small Unix install X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 20:25:54 -0000 John Nielsen wrote: > Is there a reason a standard installation of FreeBSD 4/6/7 won't work > for you? Just do a minimal install of the OS from CD or network then > install [parts of] X, fluxbox, and your other apps from ports or > packages and away you go. You could weigh the benefits [possible memory > savings] of compiling your own kernel against the time and disk space > required, but you shouldn't ever have to build world or ports unless you > feel so inclined, especially now that freebsd-update is part of the base > system. > Time and effort. I barely use the internet personally and I didn't want to spend the time to setup a new install, ports, kernel, etc. I do that 60 hours a week for a living, it ceased being fun for me a long time ago. Darren Spruell wrote: > Yes, there's plenty of options for very small Unix installs. Those > you've tried have been the modern desktop-oriented distributions of > FreeBSD and they of course don't shoot for the older class of systems. > Unix has resisted bloat It was the off chance I could install them and just not use the parts I didn't need. I figured it was a long shot but it only took 30 minutes during lunch to find out if they would work. All of my machines are servers, web/radius/SQL/ftp/email/bacula/streaming/etc. I spend all day in terminal sessions, my experience with X in the last 7 years is minimal ;^) I may just have to spend the time to do an install, install some ports, configure X, configure the wireless card, and configure printing. I appreciate the responses, thanks. DAve -- Google finally, after 7 years, provided a logo for veterans. Thank you Google. What to do with my signature now? From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 20:31:10 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B238016A417; Fri, 28 Dec 2007 20:31:10 +0000 (UTC) (envelope-from timothyk@wallnet.com) Received: from mta5.srv.hcvlny.cv.net (mta5.srv.hcvlny.cv.net [167.206.4.200]) by mx1.freebsd.org (Postfix) with ESMTP id 84E4D13C44B; Fri, 28 Dec 2007 20:31:10 +0000 (UTC) (envelope-from timothyk@wallnet.com) Received: from www.smsd.tv (ool-18bb7953.dyn.optonline.net [24.187.121.83]) by mta5.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JTS00JFE0ZX7U20@mta5.srv.hcvlny.cv.net>; Fri, 28 Dec 2007 15:31:10 -0500 (EST) Received: from access.smsd.tv ([10.10.10.10]) by www.smsd.tv (8.14.2/8.14.2) with ESMTP id lBSKV8co038999; Fri, 28 Dec 2007 15:31:08 -0500 (EST envelope-from timothyk@wallnet.com) Date: Fri, 28 Dec 2007 15:30:59 -0500 From: Tim Kellers In-reply-to: <584BD35A-01ED-495C-B579-1507C0444E3E@gmail.com> Message-id: <47755D03.6040001@wallnet.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT References: <20071228175444.93100@gmx.net> <477544BC.4070009@math.missouri.edu> <584BD35A-01ED-495C-B579-1507C0444E3E@gmail.com> User-Agent: Thunderbird 2.0.0.9 (X11/20071127) Cc: Stephen Montgomery-Smith , Mon Si , freebsd-ports@freebsd.org, freebsd-questions@freebsd.org Subject: Re: pkg_delete: package 'xorg-drivers-7.3' doesn't have a prefix X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 20:31:10 -0000 If you vi /usr/ports/UPDATING and search for fearless, it comes right up: 20070519: AFFECTS: users of Xorg AUTHOR: kris@FreeBSD.org Welcome, fearless user! You are about to embark upon a mystical journey to the world of xorg 7.2. Eric Crist wrote: > On Dec 28, 2007, at 12:47 PM, Stephen Montgomery-Smith wrote: > >> Mon Si wrote: >>> Dear list, >>> I'm experiencing problems when I try to portupgrade the xorg-driver >>> port. The old version of the port can't be uninstalled during the >>> portupgrade due to an undefined prefix. >>> The port can't be deleted by "pkg_delete -f xorg-drivers-7.3" >>> Does anybody know how to upgrade / remove this port? >>> Thanks in advance, >>> Simon >> >> If nothing else works, you could try >> rm -rf /var/db/pkg/xorg-drivers-7.3 > > If I remember correctly, there are detailed instructions in > /usr/ports/UPDATING -- go back to notes for sometime in May of 2007, > and there's a really long entry on upgraded to Xorg 7.x from 6.9. I > think the entry specifically mentions 7.2, but it should work for 7.3 > as well. > > HTH > ----- > Eric F Crist > Secure Computing Networks > > > _______________________________________________ > freebsd-ports@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org" > > From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 20:41:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 76BD816A41A for ; Fri, 28 Dec 2007 20:41:04 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.179]) by mx1.freebsd.org (Postfix) with ESMTP id 4816213C43E for ; Fri, 28 Dec 2007 20:41:04 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6032887waf.3 for ; Fri, 28 Dec 2007 12:41:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=4eWNAKA39kNwXWpIMq0n6FqB+GSMkvurxsBgSAgjTH4=; b=Oyd+63P65Cpb3NHOhFPK1RW+yF32eFfKJrm46v5X06FCOzu5KWqUL9GXALy0535OREZT1BPqMlaoYkZ0ze7/v/a9e5R91jKTk1UIsIA6TrWlHQzy/x5t4v5mg2MF28KQijrPz+YEgNUIo4te7dYMP5GvwNexZ0G8dvbJCoSW4xw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=THX6etTFyKbFE5gKGSjUEXPg3SOjS1YdQxgOzqB07i/29roi3ZgAUkcpOCGNIKh7fObzxk6s3+QaM/BLpX1cRtUOJZyyzpSygkHhoNzRFp0HtzYPvbz2Nwa+CptY+4fWYFpE7TFwsGdXOiM8CmePWKQd+A5YE5UeUHU6fDi8PFM= Received: by 10.114.73.1 with SMTP id v1mr8335335waa.16.1198874463856; Fri, 28 Dec 2007 12:41:03 -0800 (PST) Received: from sniper ( [71.221.173.206]) by mx.google.com with ESMTPS id n9sm16144130wag.39.2007.12.28.12.41.03 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 28 Dec 2007 12:41:03 -0800 (PST) From: Andrew Falanga To: Derek Ragona Date: Fri, 28 Dec 2007 13:40:57 -0700 User-Agent: KMail/1.9.6 References: <200712281033.40654.af300wsm@gmail.com> <6.0.0.22.2.20071228122316.02469808@mail.computinginnovations.com> In-Reply-To: <6.0.0.22.2.20071228122316.02469808@mail.computinginnovations.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712281340.57843.af300wsm@gmail.com> Cc: FreeBSD Questions Subject: Re: How to make sendmail listen on an address other than the loopback X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 20:41:04 -0000 On Friday 28 December 2007 11:24:50 Derek Ragona wrote: > At 11:33 AM 12/28/2007, Andrew Falanga wrote: > >Hi, > > > >I'm trying to get an e-mail system working for my church > >(whitneybaptist.org). > >I've added a file called local-host-names in /etc/mail as described in the > >Handbook, then did "/etc/rc.d/sendmail restart" and then did "sockstat | > > grep sendmail" and got the following results: > > > >root sendmail 32889 3 tcp4 127.0.0.1:25 *:* > >root sendmail 32889 4 dgram -> /var/run/logpriv > >smmsp sendmail 696 3 dgram -> /var/run/log > > > > > >Now, with the exception of the additional file, nothing has been done to > > this stock sendmail configuration (system is 6.2-RELEASE-p7). How would > > I make sendmail listen on the ip of 192.168.2.23? I do have some > > experience with sendmail, however, it was several years ago and I've > > forgotten quite a bit. Why isn't it listening on that address now? > > > >Andy > > Take a look at your settings for sendmail in /etc/rc.conf vs > /etc/default/rc.conf > > You need two instances of sendmail running, one for local delivery, another > for external mail send receive. > > -Derek Derek, Thank you. Interesting that the Handbook didn't mention it. At least, this section didn't mention it and this is what I was looking to: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sendmail.html Thanks again. I set "sendmail_enable='YES'" in /etc/rc.conf (per instructions to leave alone /etc/defaults/rc.conf) and then did /etc/rc.d/sendmail restart and it worked. Andy From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 21:40:10 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A79D516A474 for ; Fri, 28 Dec 2007 21:40:10 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: from outbound-mail-41.bluehost.com (outbound-mail-41.bluehost.com [69.89.18.10]) by mx1.freebsd.org (Postfix) with SMTP id 8542F13C45A for ; Fri, 28 Dec 2007 21:40:10 +0000 (UTC) (envelope-from perrin@apotheon.com) Received: (qmail 21844 invoked by uid 0); 28 Dec 2007 21:40:10 -0000 Received: from unknown (HELO box183.bluehost.com) (69.89.25.183) by mailproxy3.bluehost.com with SMTP; 28 Dec 2007 21:40:10 -0000 Received: from c-24-9-123-251.hsd1.co.comcast.net ([24.9.123.251] helo=demeter.hydra) by box183.bluehost.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.68) (envelope-from ) id 1J8Mw5-0004cf-Tw for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 14:40:10 -0700 Received: from demeter.hydra (localhost [127.0.0.1]) by demeter.hydra (8.13.6/8.13.6) with ESMTP id lBSLe8dV094016 for ; Fri, 28 Dec 2007 14:40:08 -0700 (MST) (envelope-from perrin@apotheon.com) Received: (from ren@localhost) by demeter.hydra (8.13.6/8.13.6/Submit) id lBSLe7KW094015 for freebsd-questions@freebsd.org; Fri, 28 Dec 2007 14:40:07 -0700 (MST) (envelope-from perrin@apotheon.com) X-Authentication-Warning: demeter.hydra: ren set sender to perrin@apotheon.com using -f Date: Fri, 28 Dec 2007 14:40:07 -0700 From: Chad Perrin To: freebsd-questions@freebsd.org Message-ID: <20071228214007.GH89701@demeter.hydra> Mail-Followup-To: freebsd-questions@freebsd.org References: <20071218040802.GB6678@ayn.mi.celestial.com> <20071218054048.6EE7.A38C9147@seibercom.net> <20071228171733.GB89701@demeter.hydra> <47755A60.6030301@brianwhalen.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <47755A60.6030301@brianwhalen.net> User-Agent: Mutt/1.4.2.3i X-Identified-User: {737:box183.bluehost.com:apotheon:apotheon.net} {sentby:bopbeforesmtp 24.9.123.251 authed with apotheon.com} Subject: Re: SSH through port forwarding X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 21:40:10 -0000 On Fri, Dec 28, 2007 at 12:19:44PM -0800, Brian wrote: > Chad Perrin wrote: > >On Tue, Dec 18, 2007 at 05:44:11AM -0500, Gerard Seibert wrote: > > > >>>On December 18, 2007 at 12:47AM sham khalil wrote: > >>> > >>>once you open port 22 to public ip, you'll get people try to bruteforce > >>>your > >>>machine. > >>>if you don't want that set sshd to listen to a higher number like 5522 > >>>then forward port 5522 from the router to the internal machines. > >>> > >>>unfortunately for wrt54g, you can't forward port 5522 to 22 for internal > >>>machine. > >>> > >>Security through obscurity is a poor substitute for security. Port > >>scanners > >>will eventually find that port also. > >> > > > >One needs something else for security against brute-force attempts, but > >changing the port number does help cut down on the amount of bandwidth > >consumption on the LAN side of your router by allowing the router to > >ignore/deny all incoming traffic on port 22. > > > Has denyhosts been considered? It has been considered (and used) by me -- but I have no idea about the OP. -- CCD CopyWrite Chad Perrin [ http://ccd.apotheon.org ] Larry Wall: "A script is what you give the actors. A program is what you give the audience." From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 21:45:00 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4851016A420 for ; Fri, 28 Dec 2007 21:45:00 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 74A6F13C442; Fri, 28 Dec 2007 21:44:59 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <47756E5A.9060904@FreeBSD.org> Date: Fri, 28 Dec 2007 22:44:58 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: Brian O'Shea References: <89106.34681.qm@web39509.mail.mud.yahoo.com> In-Reply-To: <89106.34681.qm@web39509.mail.mud.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: FreeBSD Questions Subject: Re: buildkernel with INVARIANTS, WITNESS, DEBUG_LOCKS, etc. fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 21:45:00 -0000 Brian O'Shea wrote: > Thank you for your reply, Kris. > > --- Kris Kennaway wrote: >> Brian O'Shea wrote: >>> Hello FreeBSD developers, >>> >>> Building a FreeBSD 6.2-RELEASE kernel on an Intel Pentium 4 with the >>> following config options causes buildkernel to fail with undefined >>> references to stack_save, stack_zero, and stack_print functions: >>> >>> makeoptions DEBUG=-g > > options KDB > options DDB > >>> options INVARIANTS >>> options INVARIANT_SUPPORT >>> options WITNESS >>> options DEBUG_LOCKS >>> options DEBUG_VFS_LOCKS >>> options DIAGNOSTIC >>> > ... > >> I think you also need DDB. > > I added the KDB and DDB options and now the buildkernel succeeds. Now > hopefully I can get a crash dump and (try to) start debuging my problem. > >> This is a minor bug which you could send-pr about if you like. > > Would this be a docs bug, or a config bug? Mostly a docs bug. In 6.x the stack_save foo isn't really useful without DDB. Kris From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 21:47:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8024116A41A for ; Fri, 28 Dec 2007 21:47:31 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 711D313C455; Fri, 28 Dec 2007 21:47:30 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <47756EF0.3080406@FreeBSD.org> Date: Fri, 28 Dec 2007 22:47:28 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: wahjava.ml@gmail.com References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Cc: freebsd-questions@freebsd.org Subject: Re: Kernel crashed due to pagefault while running net/avahi X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 21:47:31 -0000 ???? ????? Ashish Shukla wrote: > Hi > > I'm running FreeBSD 7.0-BETA4 (AMD64) on Intel Pentium 4 630 > (EM64T/HT) on Intel D945GNTL motheboard. I'd this crash when I was > running in GNOME, playing with Avahi and nss_mdns to get mDNS over > IPv6 working. > > ----8<----8<---- > [abbe@chateau ~/crashes]$ kgdb /boot/kernel/kernel vmcore.0 > [GDB will not be able to debug user-mode threads: > /usr/lib/libthread_db.so: Undefined symbol "ps_pglobal_lookup"] > GNU gdb 6.1.1 [FreeBSD] > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you are > welcome to change it and/or distribute copies of it under certain conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for details. > This GDB was configured as "amd64-marcel-freebsd". > > Unread portion of the kernel message buffer: > > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0xffffff0101880530 > fault code = supervisor read data, page not present > instruction pointer = 0x8:0xffffffff80594e8e > stack pointer = 0x10:0xffffffffaf2807c0 > frame pointer = 0x10:0xffffff0001fe5700 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 953 (avahi-daemon) > trap number = 12 > panic: page fault > cpuid = 0 > Uptime: 1h7m27s > Physical memory: 2025 MB > Dumping 311 MB: 296 280 264 248 232 216 200 184 168 152 136 120 104 88 > 72 56 40 24 8 > > #0 doadump () at pcpu.h:194 > 194 pcpu.h: No such file or directory. > in pcpu.h > (kgdb) bt > #0 doadump () at pcpu.h:194 > #1 0x0000000000000004 in ?? () > #2 0xffffffff80451c46 in boot (howto=260) at > /usr/src/sys/kern/kern_shutdown.c:409 > #3 0xffffffff80452072 in panic (fmt=0x104
bounds>) at /usr/src/sys/kern/kern_shutdown.c:563 > #4 0xffffffff8070bcfa in trap_fatal (frame=0xffffff00035869c0, > eva=18446742974254081128) at /usr/src/sys/amd64/amd64/trap.c:724 > #5 0xffffffff8070c0a1 in trap_pfault (frame=0xffffffffaf280710, > usermode=0) at /usr/src/sys/amd64/amd64/trap.c:641 > #6 0xffffffff8070c95f in trap (frame=0xffffffffaf280710) at > /usr/src/sys/amd64/amd64/trap.c:410 > #7 0xffffffff806f383e in calltrap () at > /usr/src/sys/amd64/amd64/exception.S:169 > #8 0xffffffff80594e8e in ip6_setpktopts (control=0xffffff0001fe5700, > opt=0xffffffffaf280870, stickyopt=Variable "stickyopt" is not > available. > ) at /usr/src/sys/netinet6/ip6_output.c:2813 > #9 0xffffffff805a7083 in udp6_send (so=Variable "so" is not available. > ) at /usr/src/sys/netinet6/udp6_usrreq.c:523 > #10 0xffffffff804a0e77 in sosend_generic (so=0xffffff0003365ae0, > addr=0xffffff0003029560, uio=0xffffffffaf280a30, > top=0xffffff00034b3100, control=0xffffff0001fe5700, flags=Variable > "flags" is not available. > ) > at /usr/src/sys/kern/uipc_socket.c:1240 > #11 0xffffffff804a3866 in kern_sendit (td=0xffffff00035869c0, s=16, > mp=0xffffffffaf280af0, flags=0, control=0xffffff0001fe5700, > segflg=Variable "segflg" is not available. > ) at /usr/src/sys/kern/uipc_syscalls.c:789 > #12 0xffffffff804a6343 in sendit (td=0xffffff00035869c0, s=16, > mp=0xffffffffaf280af0, flags=0) at > /usr/src/sys/kern/uipc_syscalls.c:730 > #13 0xffffffff804a63b4 in sendmsg (td=0xffffff00035869c0, > uap=0xffffffffaf280be0) at /usr/src/sys/kern/uipc_syscalls.c:922 > #14 0xffffffff8070c30c in syscall (frame=0xffffffffaf280c70) at > /usr/src/sys/amd64/amd64/trap.c:852 > #15 0xffffffff806f3a4b in Xfast_syscall () at > /usr/src/sys/amd64/amd64/exception.S:290 > #16 0x00000008011c114c in ?? () > Previous frame inner to this frame (corrupt stack?) > (kgdb) frame 8 > #8 0xffffffff80594e8e in ip6_setpktopts (control=0xffffff0001fe5700, > opt=0xffffffffaf280870, stickyopt=Variable "stickyopt" is not > available. > ) at /usr/src/sys/netinet6/ip6_output.c:2813 > 2813 cm = mtod(control, struct cmsghdr *); > (kgdb) print control > $2 = (struct mbuf *) 0xffffff0001fe5700 > ---->8---->8---- > > The crashdump is 311 MiB, and after bzip2-ing it comes to around 55 > MiB, which is still too big for me to upload it somewhere. Any other > thing I can do to help developers troubleshoot this problem, please > let me know ? > > Will FreeBSD 7.0-RELEASE be recommended for production systems. I'm > thinking to use it for my this machine (which is this desktop). I'm > thinking to switch to FreeBSD fulltime, is FreeBSD 7.0 recommended ? Yes, in general. There might not be time to get this particular bug fixed in time for the release though, but please submit a PR with the above ASAP. Kris From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 22:42:21 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0880D16A417 for ; Fri, 28 Dec 2007 22:42:21 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [64.7.153.18]) by mx1.freebsd.org (Postfix) with ESMTP id D0A0413C442 for ; Fri, 28 Dec 2007 22:42:20 +0000 (UTC) (envelope-from mike@sentex.net) Received: from lava.sentex.ca (pyroxene.sentex.ca [199.212.134.18]) by smarthost1.sentex.ca (8.13.8/8.13.8) with ESMTP id lBSMgJ7e095737 for ; Fri, 28 Dec 2007 17:42:19 -0500 (EST) (envelope-from mike@sentex.net) Received: from mdt-xp.sentex.net (simeon.sentex.ca [192.168.43.27]) by lava.sentex.ca (8.13.8/8.13.3) with ESMTP id lBSMgJEh076376 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 28 Dec 2007 17:42:19 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <200712282242.lBSMgJEh076376@lava.sentex.ca> X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Fri, 28 Dec 2007 17:40:20 -0500 To: freebsd-questions@freebsd.org From: Mike Tancsa Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: mixing uart and sio X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 22:42:21 -0000 I am in a rather annoying situation of having one serial application not work well with the uart driver (null modem cable connects onboard serial ports to a machine I have no control over) and a GPRS device where the sio driver causes a constant stream of interrupt overflows sio4: 109 more interrupt-level buffer overflows (total 109) sio4: 109 more interrupt-level buffer overflows (total 218) sio4: 109 more interrupt-level buffer overflows (total 327) sio4: 109 more interrupt-level buffer overflows (total 436) sio4: 109 more interrupt-level buffer overflows (total 545) sio4: 109 more interrupt-level buffer overflows (total 654) sio4: 109 more interrupt-level buffer overflows (total 763) dev.sio.4.%desc: Sierra Wireless AC860 dev.sio.4.%driver: sio dev.sio.4.%location: function=1 dev.sio.4.%pnpinfo: manufacturer=0x0192 product=0x0710 cisvendor="Sierra Wireless" cisproduct="AC860" function_type=2 Attaching even at 9600 on this card, shows half of the chars are missed. However, with the uart driver, it works. The one small problem is that until I open the device, there is an interrupt storm on it. But after that, it works perfectly. e.g. attaching with sio shows the output of ati3 cut off # cu -l /dev/cuad4 Connected atz OK ati3 Manufacturer: Sierra Wireless, Inc. Model: AC860 Revision: U1_1_29ACAP G:/WORKSPACES/FIRMWARE/U1_1_29ACAP/MSM6275/SRC 2006/02/20 20:16:52 IMEI: 357806002095833 FSN: X172096078612 3GPP Release 5 +GCAP:atz OK ati3 Manufacturer: Sierra Wireless, Inc. Model: AC860 Revision: U1_1_29ACAP G:/WORKSPACES/FIRMWARE/U1_1_29ACAP/MSM6275/SRC 2006/ vs # cu -l /dev/cuau0 Connected atz OK ati3 Manufacturer: Sierra Wireless, Inc. Model: AC860 Revision: U1_1_29ACAP G:/WORKSPACES/FIRMWARE/U1_1_29ACAP/MSM6275/SRC 2006/02/20 20:16:52 IMEI: 357806002095833 FSN: X172096078612 3GPP Release 5 +GCAP: +CGSM,+FCLASS,+DS # vmstat -i interrupt total rate irq0: clk 287563 995 irq3: sio1 1 0 irq4: sio0 307 1 irq5: vr1 1 0 irq7: 2 0 stray irq7 2 0 irq8: rtc 36840 127 irq10: cbb0 sio4 59 0 irq11: vr0 3822 13 irq14: ata0 34495 119 irq15: ata1 ohci0+ 2 0 Total 363094 1256 # vmstat -i interrupt total rate irq0: clk 89881 987 irq5: vr1 1 0 irq7: 1 0 stray irq7 1 0 irq8: rtc 11504 126 irq10: cbb0 uart0 44275 486 irq11: vr0 695 7 irq14: ata0 21145 232 irq15: ata1 ohci0+ 2 0 Total 167505 1840 cbb0: mem 0xa0005000-0xa0005fff irq 10 at device 14.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: at device 20.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0 ata0: on atapci0 ata1: on atapci0 ohci0: mem 0xa0006000-0xa0006fff irq 15 at device 21.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ehci0: mem 0xa0007000-0xa0007fff irq 15 at device 21.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Timecounter "TSC" frequency 433250425 Hz quality 800 Timecounters tick every 1.000 msec Fast IPsec: Initialized Security Association Processing. uart0: at port 0x3e8-0x3ef irq 10 function 1 config 34 on pccard0 interrupt storm detected on "irq10:"; throttling interrupt source ---Mike -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet since 1994 www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 23:32:26 2007 Return-Path: Delivered-To: questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D48C716A418 for ; Fri, 28 Dec 2007 23:32:26 +0000 (UTC) (envelope-from lenzi.sergio@gmail.com) Received: from an-out-0708.google.com (an-out-0708.google.com [209.85.132.243]) by mx1.freebsd.org (Postfix) with ESMTP id 901FB13C442 for ; Fri, 28 Dec 2007 23:32:26 +0000 (UTC) (envelope-from lenzi.sergio@gmail.com) Received: by an-out-0708.google.com with SMTP id c14so745214anc.13 for ; Fri, 28 Dec 2007 15:32:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:subject:from:to:in-reply-to:references:content-type:date:message-id:mime-version:x-mailer; bh=9ujnxFE3X1xkVQds4UUeIdxgYwiG2yVD30sx8FoiqPc=; b=obQE8LpRbyZWR/FwYBfrhhHk9C4NWGB92Wr0VPOZ3+fdO0mnD+iYSiFI4fdOZpebF9bYf0EjATvXxxn98lmKEliEIlzXjtiyqCXRy02nQh3ODfdbniplgYFa7NX9X4NFIrXTgriX1VL5l2ggdSw+htBWBCOk1eXPTYwE90CO+o8= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=subject:from:to:in-reply-to:references:content-type:date:message-id:mime-version:x-mailer; b=WtLybMVCCihRlT0dDIN3xeODUGddCFkBaZ/5EaPHK5Vh/11Ou7gzjlwchwCcvPA6/pFTgIWxBtPHytyPTP0Z83MRJl7F17MDmzIg5zgjTR5bgunimia0UOD2cX1NaJ0migyp1WW7oCRZodinj6zqgob0lNiESDjP2EKGIBazbdk= Received: by 10.100.123.4 with SMTP id v4mr20163053anc.14.1198883246360; Fri, 28 Dec 2007 15:07:26 -0800 (PST) Received: from ?192.168.6.226? ( [189.30.138.217]) by mx.google.com with ESMTPS id 18sm13897473agb.10.2007.12.28.15.07.23 (version=TLSv1/SSLv3 cipher=RC4-MD5); Fri, 28 Dec 2007 15:07:25 -0800 (PST) From: Sergio Lenzi To: usleepless@gmail.com, questions@freebsd.org In-Reply-To: References: Date: Fri, 28 Dec 2007 21:06:23 +0000 Message-Id: <1198875983.1311.11.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.12.2 FreeBSD GNOME Team Port Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: Ekiga runs but hangs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 23:32:26 -0000 Em Sex, 2007-12-28 às 12:17 +0100, usleepless@gmail.com escreveu: > Hello All, > > is anyone using ekiga? ekiga runs and connects to 500@ekiga.net ( test number ). > > but when i hang up, or change volume using the ekiga-controls, the UI freezes. > > #FreeBSD host 7.0-BETA2 FreeBSD 7.0-BETA2 #4 > > i would love to hear succes or failures. > > regards, > > usleep it happens with me too. the problem is in the module sound-oss in the pwlib the module that deals with oss (the freebsd sound system...) tries to resample the stream and than loops... consuming all the cpu. the folowing patch solves the problem for me.... name this file to patch-oss and put it in /usr/ports/devel/pwlib/files and than... cd /usr/ports/devel/pwlib make clean deinstall package ========================================================= --- plugins/sound_oss/sound_oss.cxx.orig +++plugins/sound_oss/sound_oss.cxx @@ -565,7 +565,6 @@ entry->bitsPerSample = mBitsPerSample = _bitsPerSample; entry->isInitialised = FALSE; entry->fragmentValue = 0x7fff0008; - entry->resampleRate = 0; } // save the direction and device @@ -602,7 +601,6 @@ // do not re-initialise initialised devices if (entry.isInitialised) { PTRACE(6, "OSS\tSkipping setup for " << device << " as already initialised"); - resampleRate = entry.resampleRate; } else { PTRACE(6, "OSS\tInitialising " << device << "(" << (void *)(&entry) << ")"); @@ -646,17 +644,6 @@ arg = val = entry.sampleRate; if (ConvertOSError(::ioctl(os_handle, SNDCTL_DSP_SPEED, &arg))) { stat = TRUE; - - // detect cases where the hardware can't do the actual rate we need, but can do a simple multiple - if (arg != (int)entry.sampleRate) { - if (((arg / entry.sampleRate) * entry.sampleRate) == (unsigned)arg) { - PTRACE(3, "Resampling data at " << entry.sampleRate << " to match hardware rate of " << arg); - resampleRate = entry.resampleRate = arg / entry.sampleRate; - } else { - PTRACE_IF(4, actualSampleRate != (unsigned)val, "Actual sample rate selected is " << actualSampleRate << ", not " << entry.sampleRate); - actualSampleRate = arg; - } - } } } } @@ -724,42 +711,10 @@ if (!Setup() || os_handle < 0) return FALSE; - if (resampleRate == 0) { - while (!ConvertOSError(::write(os_handle, (void *)buf, len))) - if (GetErrorCode() != Interrupted) - return FALSE; - lastWriteCount += len; - } - - else { - // cut the data into 1K blocks and upsample it - lastWriteCount = 0; - BYTE resampleBuffer[1024]; - const BYTE * src = (const BYTE *)buf; - const BYTE * srcEnd = src + len; - while (src < srcEnd) { - - // expand the data by the appropriate sample ratio - BYTE * dst = resampleBuffer; - const BYTE * srcStart = src; - unsigned j; - - while ((src < srcEnd) && (dst < (resampleBuffer + sizeof(resampleBuffer) - resampleRate*2))) { - for (j = 0; j < resampleRate; ++j) { - memcpy(dst, src, 2); - dst += 2 ; - } - src += 2; - } - lastWriteCount += src - srcStart; - while (!ConvertOSError(::write(os_handle, resampleBuffer, dst - resampleBuffer))) { - if (GetErrorCode() != Interrupted) - return FALSE; - } - } - - } - + while (!ConvertOSError(::write(os_handle, (void *)buf, len))) + if (GetErrorCode() != Interrupted) + return FALSE; + lastWriteCount += len; return TRUE; } @@ -770,72 +725,26 @@ if (!Setup() || os_handle < 0) return FALSE; - if (resampleRate == 0) { - - PINDEX total = 0; - while (total < len) { - PINDEX bytes = 0; - while (!ConvertOSError(bytes = ::read(os_handle, (void *)(((unsigned char *)buf) + total), len-total))) { - if (GetErrorCode() != Interrupted) { - PTRACE(6, "OSS\tRead failed"); - return FALSE; - } - PTRACE(6, "OSS\tRead interrupted"); - } - total += bytes; - if (total != len) - PTRACE(6, "OSS\tRead completed short - " << total << " vs " << len << ". Reading more data"); - } - lastReadCount = total; - } - - else { - - // downsample the data - - BYTE * dst = (BYTE *)buf; - BYTE * dstEnd = dst + len; - lastReadCount = 0; - - PBYTEArray resampleBuffer((1024 / resampleRate) * resampleRate); - - // downsample the data into 1K blocks - while (dst < dstEnd) { - - - // calculate number of source bytes needed to fill the buffer - PINDEX srcBytes = resampleRate * (dstEnd - dst); - PINDEX bytes; - - { - PINDEX bufLen = PMIN(resampleBuffer.GetSize(), srcBytes); - while (!ConvertOSError(bytes = ::read(os_handle, resampleBuffer.GetPointer(), bufLen))) { - if (GetErrorCode() != Interrupted) - return FALSE; - } - } - - // use an average, not just a single sample - const BYTE * src = resampleBuffer; - while ( ((src - resampleBuffer) < bytes) && (dst < dstEnd)) { - int sample = 0; - unsigned j; - for (j = 0; j < resampleRate; ++j) { - sample += *(PUInt16l *)src; - src += 2; - } - *(PUInt16l *)dst = sample / resampleRate; - dst +=2 ; - lastReadCount += 2; + PINDEX total = 0; + while (total < len) { + PINDEX bytes = 0; + while (!ConvertOSError(bytes = ::read(os_handle, (void *)(((unsigned char *)buf) + total), len-total))) { + if (GetErrorCode() != Interrupted) { + PTRACE(6, "OSS\tRead failed"); + return FALSE; } + PTRACE(6, "OSS\tRead interrupted"); } + total += bytes; + if (total != len) + PTRACE(6, "OSS\tRead completed short - " << total << " vs " << len << ". Reading more data"); } + lastReadCount = total; if (lastReadCount != len) PTRACE(6, "OSS\tRead completed short - " << lastReadCount << " vs " << len); else PTRACE(6, "OSS\tRead completed"); - return TRUE; } --- plugins/sound_oss/sound_oss.h.orig 2007-12-03 03:31:15.000000000 +0000 +++ plugins/sound_oss/sound_oss.h 2007-12-03 03:31:29.000000000 +0000 @@ -42,7 +42,6 @@ unsigned bitsPerSample; unsigned fragmentValue; BOOL isInitialised; - unsigned resampleRate; }; class PSoundChannelOSS: public PSoundChannel @@ -99,5 +98,4 @@ Directions direction; PString device; BOOL isInitialised; - unsigned resampleRate; }; ============================================================= From owner-freebsd-questions@FreeBSD.ORG Fri Dec 28 23:41:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3448B16A417 for ; Fri, 28 Dec 2007 23:41:04 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id 11DA213C458 for ; Fri, 28 Dec 2007 23:41:03 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6125682waf.3 for ; Fri, 28 Dec 2007 15:41:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=ZJIWiXSOwdX++wkFjgjA/MljKiU0Rw2IgwjRCAVIjjk=; b=ndja8UAUC1dRwl8YdfVeN4y7Uy+whRRfnp1S1NJv1rFdcb8ye8A/HAxmktK1khDYECQHoPcEMXM2lsJ+RSws/lD4q3q9AkBTb9LKjoQQDx1N3foMp7s1dZGKapdQCjyIIOJajSqoN9MR151DecLI99ik7xA9ZJu10jpZHHsacio= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=SnEHOgZIRmzQdJlHkpgnEyXrtnq5V1OuvIf2TCCpmqynudR2GHisPvfLv8xVlYWbJH+eOfFHvbgM1ArywfjNlJ0qgra1rrDPX49SDWqHoj08SzlUdMs/lmG7YPcHiA6uX7uqseP9qeTctIEox6JxiIvEI4CCBqSdXXgZBSbY268= Received: by 10.114.57.1 with SMTP id f1mr9733348waa.15.1198885262791; Fri, 28 Dec 2007 15:41:02 -0800 (PST) Received: from sniper ( [71.221.173.206]) by mx.google.com with ESMTPS id v37sm5308789wah.12.2007.12.28.15.41.01 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 28 Dec 2007 15:41:02 -0800 (PST) From: Andrew Falanga To: FreeBSD Questions Date: Fri, 28 Dec 2007 16:40:55 -0700 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712281640.56126.af300wsm@gmail.com> Subject: Dovecot login and account issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Dec 2007 23:41:04 -0000 Ok, there's something apparently not quite right in my understanding. I have the following log entries in /var/log/maillog for a login attempt by a virtual user into my new dovecot system: Dec 28 17:48:07 whitbap dovecot: pop3-login: Login: user=, method=PLAIN, rip=71.221.173.206, lip=192.168.2.23 Dec 28 17:48:07 whitbap dovecot: POP3(jdunkin): mkdir_parents(/var/mail/vmail//mail) failed: Not a directory Dec 28 17:48:07 whitbap dovecot: POP3(jdunkin): Failed to create storage with data: mbox:/var/mail/vmail//mail/:INBOX=/var/mail/jdunkin Dec 28 17:48:07 whitbap dovecot: child 34067 (pop3) returned error 89 Dec 28 17:48:52 whitbap dovecot: POP3(jdunkin): mkdir_parents(/var/mail/vmail//mail) failed: Not a directory Dec 28 17:48:52 whitbap dovecot: POP3(jdunkin): Failed to create storage with data: mbox:/var/mail/vmail//mail/:INBOX=/var/mail/jdunkin Dec 28 17:48:52 whitbap dovecot: child 34070 (pop3) returned error 89 Now, in my /usr/local/etc/dovecot.conf file I have this: mail_location = mbox:~/mail/:INBOX=/var/mail/%u Which seems to be correct. Why then is dovecot trying to make a mail directory in /var/mail/vmail? (vmail is the virtual user.) Also, please assist in my understanding of this one. I currently have (in dovecot.conf): auto default { mechanisms = plain digest-md5 # there is much other stuff here, I'm only adding what isn't commented # hope it's relative passdb sql { # Path for SQL configuration file, see doc/dovecot-sql-example.conf args = /usr/local/etc/dovecot-sql.conf } userdb sql { # Path for SQL configuration file, see doc/dovecot-sql-example.conf args = /usr/local/etc/dovecot-sql.conf } user = vmail } What is the difference between digest-md5 and cram-md5? I've read a little bit about digest md5 from the dovecot wiki and it looks like the digest is supposed to be of a string like this (using one of my virtual users): md5 -s whitbap@whitneybaptist.org::pass Is this true? If so, when the users login, they'll send as the user id? If this isn't true (and this is how I currently have it configured), I simply made a hash as follows: md5 -s And then inserted into my postgresql database a string in this format: {PLAIN-MD5} This isn't working so what did I do wrong? Any help on resolving these two issues is greatly appreciated. Andy From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 06:46:41 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6696416A417 for ; Sat, 29 Dec 2007 06:46:41 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: from smtpgate1.pacific.net.sg (smtpgate1.pacific.net.sg [203.120.90.31]) by mx1.freebsd.org (Postfix) with SMTP id 98C4B13C45B for ; Sat, 29 Dec 2007 06:46:35 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: (qmail 2293 invoked from network); 29 Dec 2007 06:46:33 -0000 Received: from adsl48.dyn112.pacific.net.sg (HELO P2120.somewherefaraway.com) (oceanare@210.24.112.48) by smtpgate1.pacific.net.sg with ESMTPA; 29 Dec 2007 06:46:30 -0000 Message-ID: <4775ED3F.50508@pacific.net.sg> Date: Sat, 29 Dec 2007 14:46:23 +0800 From: Erich Dollansky User-Agent: Thunderbird 2.0.0.6 (X11/20070826) MIME-Version: 1.0 To: Rob References: <26ddd1750712271246j14795cf3wf8e9727f0f7cc148@mail.gmail.com> <47744048.6020202@daleco.biz> <47752446.8090908@gmail.com> In-Reply-To: <47752446.8090908@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Maxim Khitrov , User Questions Subject: Re: Blocking undesirable domains using BIND X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 06:46:41 -0000 Hi, the guys seem to have some humour: Linux/Unix/Mac OSX Remove the extension and save this to your /etc directory. Considering unix is a server-based OS with a complex permission structure you'll probably want to just append your hosts file instead of overwriting it. OSX can use the hosts file, but copying it to /etc isn't enough. When finished please empty out your cache and restart your browser or reboot your computer. Erich Rob wrote: > > Then I found this site: http://everythingisnt.com/hosts.html and put > their list in hosts, and now client PCs get a squid error in place of ad > junk. Works ok for me ;) > > -Rob > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 09:01:31 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1E1E416A417 for ; Sat, 29 Dec 2007 09:01:31 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.freebsd.org (Postfix) with ESMTP id 9910713C455 for ; Sat, 29 Dec 2007 09:01:29 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from kobe.laptop (ppp15-213.adsl.forthnet.gr [62.1.238.213]) (authenticated bits=128) by igloo.linux.gr (8.14.1/8.14.1/Debian-9) with ESMTP id lBT91Eqh016068 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Sat, 29 Dec 2007 11:01:22 +0200 Received: from kobe.laptop (kobe.laptop [127.0.0.1]) by kobe.laptop (8.14.2/8.14.2) with ESMTP id lBT919lk001978; Sat, 29 Dec 2007 11:01:09 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Received: (from keramida@localhost) by kobe.laptop (8.14.2/8.14.2/Submit) id lBT919cP001977; Sat, 29 Dec 2007 11:01:09 +0200 (EET) (envelope-from keramida@ceid.upatras.gr) Date: Sat, 29 Dec 2007 11:01:08 +0200 From: Giorgos Keramidas To: Andrew Falanga Message-ID: <20071229090108.GA1816@kobe.laptop> References: <200712281033.40654.af300wsm@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200712281033.40654.af300wsm@gmail.com> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-4.127, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.27, BAYES_00 -2.60) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: How to make sendmail listen on an address other than the loopback X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 09:01:31 -0000 On 2007-12-28 10:33, Andrew Falanga wrote: > Hi, > I'm trying to get an e-mail system working for my church > (whitneybaptist.org). I've added a file called local-host-names in > /etc/mail as described in the Handbook, then did "/etc/rc.d/sendmail > restart" and then did "sockstat | grep sendmail" and got the following > results: > > root sendmail 32889 3 tcp4 127.0.0.1:25 *:* > root sendmail 32889 4 dgram -> /var/run/logpriv > smmsp sendmail 696 3 dgram -> /var/run/log > > Now, with the exception of the additional file, nothing has been done > to this stock sendmail configuration (system is 6.2-RELEASE-p7). How > would I make sendmail listen on the ip of 192.168.2.23? I do have > some experience with sendmail, however, it was several years ago and > I've forgotten quite a bit. Why isn't it listening on that address > now? What you see is `normal' for a host which supports local email delivery and forwards everything else to another `smart host'. If you want to start a listener which also accepts email from the network (instead of a listener only for 127.0.0.1 like the one you have now), you will have to tweak the `sendmail_xxx_enable' options in your `/etc/rc.conf' file. Right now, you probably have something like: sendmail_enable="NO" sendmail_submit_enable="YES" sendmail_msp_queue_enable="YES" To run the sendmail daemon for inbound email connections on all network interfaces, you need sendmail_enable="YES", and then you can drop the line for the `submit' daemon: sendmail_enable="YES" sendmail_msp_queue_enable="YES" Note: For more details about these `rc.conf' variables, it may be useful to read the rc.sendmail(5) manpage. From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 11:32:02 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 349E316A41A for ; Sat, 29 Dec 2007 11:32:02 +0000 (UTC) (envelope-from bramz4ever@yahoo.com) Received: from web50008.mail.re2.yahoo.com (web50008.mail.re2.yahoo.com [206.190.38.23]) by mx1.freebsd.org (Postfix) with SMTP id F2E2D13C45A for ; Sat, 29 Dec 2007 11:32:01 +0000 (UTC) (envelope-from bramz4ever@yahoo.com) Received: (qmail 8861 invoked by uid 60001); 29 Dec 2007 11:32:01 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=Fh5cmPvcy9wKXk9/w/wfwbih63Her59zhbG8RNVhBNVTH971PzevL8txCrN/dQMvDlOThi84D73DvA4PR06yAlk7/I8K1mnD0yLnUPa4Onge7vIAHrC0Z2qk8mxXO3nILQokB906C2A+pEQ70DiW6A/eIuMiRjgnvkPxJfsKYf0=; X-YMail-OSG: oH_ecqMVM1kShhvRzo8s3KuTyj8BHuswzli4rum5LPLiVP.6j6M4xRSni2m9D.Suy_.g0lg_7l.Qzyim.eFM86_pvUuDSWBWt6etFkrr99j7Nr6l1bm.Bl.7Vknqrih9h.aiyT8ckIKkwoY- Received: from [192.172.226.121] by web50008.mail.re2.yahoo.com via HTTP; Sat, 29 Dec 2007 03:32:00 PST X-Mailer: YahooMailRC/818.31 YahooMailWebService/0.7.158.1 Date: Sat, 29 Dec 2007 03:32:00 -0800 (PST) From: Satria Bramana To: freebsd-questions@freebsd.org MIME-Version: 1.0 Message-ID: <54309.8532.qm@web50008.mail.re2.yahoo.com> Content-Type: text/plain; charset=us-ascii X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: error running razor-admin X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 11:32:02 -0000 i'm trying to build a mailserver with antispam, so i choose to use spamassassin. When i try to run razor-admin -d -create i got an error message like this : Razor-Log: Computed razorhome from env: /var/amavis/.razor Razor-Log: Found razorhome: /var/amavis/.razor Razor-Log: read_file: 15 items read from /var/amavis/.razor/razor-agent.conf Razor-Log: -create will force complete discovery Dec 29 18:30:42.604741 admin[2468]: [ 2] [bootup] Logging initiated LogDebugLevel=9 to stdout Dec 29 18:30:42.605928 admin[2468]: [ 6] Not creating razorhome /var/amavis/.razor, already exists Dec 29 18:30:42.608444 admin[2468]: [ 5] read_file: 15 items read from /var/amavis/.razor/razor-agent.conf Dec 29 18:30:42.611008 admin[2468]: [ 5] wrote 15 HASH items to file: /var/amavis/.razor/razor-agent.conf Dec 29 18:30:42.611878 admin[2468]: [ 5] computed razorhome=/var/amavis/.razor, conf=/var/amavis/.razor/razor-agent.conf, ident=/var/amavis/.razor/identity Dec 29 18:30:42.612170 admin[2468]: [ 2] Razor-Agents v2.84 starting razor-admin -d -create Dec 29 18:30:42.612727 admin[2468]: [ 5] Can't read file /var/amavis/.razor/servers.discovery.lst: No such file or directory Dec 29 18:30:42.613114 admin[2468]: [ 5] Can't read file /var/amavis/.razor/servers.nomination.lst: No such file or directory Dec 29 18:30:42.613467 admin[2468]: [ 5] Can't read file /var/amavis/.razor/servers.catalogue.lst: No such file or directory Dec 29 18:30:42.614640 admin[2468]: [ 5] no listfile: /var/amavis/.razor/servers.nomination.lst Dec 29 18:30:42.615048 admin[2468]: [ 6] no discovery listfile: /var/amavis/.razor/servers.discovery.lst Dec 29 18:30:42.615334 admin[2468]: [ 8] Checking with Razor Discovery Server discovery.razor.cloudmark.com Dec 29 18:30:42.615639 admin[2468]: [ 6] No port specified, using 2703 Dec 29 18:30:42.615913 admin[2468]: [ 5] Connecting to discovery.razor.cloudmark.com ... Dec 29 18:31:02.624353 admin[2468]: [ 3] Unable to connect to discovery.razor.cloudmark.com:2703; Reason: Operation now in progress. Dec 29 18:31:02.624713 admin[2468]: [ 5] Razor Discovery Server discovery.razor.cloudmark.com is unreachable Dec 29 18:31:02.625365 admin[2468]: [ 1] razor-admin error: nextserver: Bootstrap discovery failed. Giving up. nextserver: Bootstrap discovery failed. Giving up. I guess that this is because i'm behind a squid proxy server, so razor can't connect to discovery.razor.cloudmark.com Can someone give some advice about setting up razor-agent.conf to use the proxy server? Thank you very much. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 14:49:58 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BBD9616A418 for ; Sat, 29 Dec 2007 14:49:58 +0000 (UTC) (envelope-from gandalf@shopzeus.com) Received: from viefep32-int.chello.at (viefep32-int.chello.at [62.179.121.50]) by mx1.freebsd.org (Postfix) with ESMTP id 08A5913C461 for ; Sat, 29 Dec 2007 14:49:57 +0000 (UTC) (envelope-from gandalf@shopzeus.com) Received: from [192.168.2.175] (really [80.99.169.3]) by viefep32-int.chello.at (InterMail vM.7.08.02.02 201-2186-121-104-20070414) with ESMTP id <20071229144956.HXCG26521.viefep32-int.chello.at@[192.168.2.175]> for ; Sat, 29 Dec 2007 15:49:56 +0100 Message-ID: <47765E94.3000500@shopzeus.com> Date: Sat, 29 Dec 2007 15:49:56 +0100 From: Laszlo Nagy User-Agent: Thunderbird 2.0.0.9 (Windows/20071031) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: 7bit Subject: Photo organizer for FreeBSD? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 14:49:58 -0000 Hi, Can you tell me what kind of software should I use for organizing photos? Here are my requirements: - should be able to handle many photos (right now we are using Picasa on Ubuntu but for 100 000+ photos it is very slow and unstable) - should be able to save comments/annotations for the photos (I do not like Picasa because it uses a special database for that. I would like to have txt files saved in the same directory where the photos are, or something similar.) - should have a full text search feature (search for photos with given keywords) - should run on Windows and FreeBSD. (Actually, I would like to burn self-starting DVDs, so a Python or Perl based GUI would be great) Well, if there is a web server based solution, that is fine with me, I need to burn photos to DVDs and be able to use them. Can you recommend something from the ports tree? Or should I write my own program? Thanks, Laszlo From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 15:02:45 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2B60E16A418 for ; Sat, 29 Dec 2007 15:02:45 +0000 (UTC) (envelope-from eoster@cs.ucla.edu) Received: from smtp-14.smtp.ucla.edu (smtp-14.smtp.ucla.edu [169.232.46.241]) by mx1.freebsd.org (Postfix) with ESMTP id 131EC13C467 for ; Sat, 29 Dec 2007 15:02:44 +0000 (UTC) (envelope-from eoster@cs.ucla.edu) Received: from mail.ucla.edu (mail.ucla.edu [169.232.46.157]) by smtp-14.smtp.ucla.edu (8.14.2/8.14.2) with ESMTP id lBTF2cmL021652 for ; Sat, 29 Dec 2007 07:02:38 -0800 Received: from [192.168.1.105] (c-71-232-97-185.hsd1.ma.comcast.net [71.232.97.185]) (authenticated bits=0) by mail.ucla.edu (8.13.8/8.13.8) with ESMTP id lBTF2aW3012760 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=NOT) for ; Sat, 29 Dec 2007 07:02:37 -0800 Mime-Version: 1.0 (Apple Message framework v752.2) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: FreeBSD Questions From: Eric Osterweil Date: Sat, 29 Dec 2007 10:02:44 -0500 X-Pgp-Agent: GPGMail 1.1.2 (Tiger) X-Mailer: Apple Mail (2.752.2) X-Probable-Spam: no X-Spam-Hits: 0.654 X-Spam-Report: SPF_SOFTFAIL X-Scanned-By: smtp.ucla.edu on 169.232.46.241 Subject: buildworld failure on VIA C3 Nehemiah X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 15:02:45 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hey all, I posted a question here about a week ago about some compilation problems that I'm having on my new VIA M10000G board. I've since tested my memory and even swapped the motherboard, and the problem remains. It really seems like it must be user error (i.e. my fault), but I can't figure out how. When I try to buildworld I get a consistent failure at the same point (from as). The output is below. I previously reported that this was random, but have since realized that it is actually very predictable (same place every time). I installed the i386 release of 6.2. Should I be using a different arch? Do I need a flag in the make.conf (I just have -pipe and -O2)? Any help would be greatly appreciated! Eric ... - -------------------------------------------------------------- >>> stage 1.1: legacy release compatibility shims - -------------------------------------------------------------- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/tmp INSTALL="sh /usr/ src/tools/install.sh" PATH=/usr/obj/usr/src/tmp/legacy/usr/sbin:/usr/ obj/usr/src/tmp/legacy/usr/bin:/usr/obj/usr/src/tmp/legacy/usr/games:/ sbin:/bin:/usr/sbin:/usr/bin WORLDTMP=/usr/obj/usr/src/tmp MAKEFLAGS="-m /usr/src/tools/build/mk -m /usr/src/share/mk" make -f Makefile.inc1 DESTDIR= BOOTSTRAPPING=602000 -DNO_HTML -DNO_INFO - DNO_LINT -DNO_MAN -DNO_NLS -DNO_PIC -DNO_PROFILE -DNO_SHARED - DNO_CPU_CFLAGS -DNO_WARNS legacy ===> tools/build (obj,includes,depend,all,install) /usr/obj/usr/src/tmp/usr/src/tools/build created for /usr/src/tools/ build cd /usr/src/tools/build; make buildincludes; make installincludes rm -f .depend mkdep -f .depend -a -I/usr/obj/usr/src/tmp/legacy/usr/include /usr/ src/tools/build/dummy.c cc -pipe -I/usr/obj/usr/src/tmp/legacy/usr/include -c /usr/src/tools/ build/dummy.c cc: Internal error: Illegal instruction: 4 (program as) Please submit a full bug report. See for instructions. *** Error code 1 Stop in /usr/src/tools/build. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iD8DBQFHdmGYK/tq6CJjZQIRAj5zAJ9Y2zYRP293oT9SOZihqHUAnLIA7gCeMXux Ug3Zm7EBRBTO46f8sEwn7fg= =AdTe -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 15:13:14 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5BF7216A41B; Sat, 29 Dec 2007 15:13:14 +0000 (UTC) (envelope-from franceschini_a@tiscali.it) Received: from relay-pt1.poste.it (relay-pt1.poste.it [62.241.4.164]) by mx1.freebsd.org (Postfix) with ESMTP id 1872B13C47E; Sat, 29 Dec 2007 15:13:14 +0000 (UTC) (envelope-from franceschini_a@tiscali.it) Received: from knute.cs.poste.it (192.168.44.52) by relay-pt1.poste.it (7.3.122) id 47759C580000339A; Sat, 29 Dec 2007 15:52:37 +0100 Received: from knute.cs.poste.it (localhost [127.0.0.1]) by knute.cs.poste.it (8.14.2/8.12.10) with ESMTP id lBTEqbGk042748; Sat, 29 Dec 2007 15:52:37 +0100 (CET) (envelope-from franceschini_a@tiscali.it) Received: (from andrea@localhost) by knute.cs.poste.it (8.14.2/8.12.10/Submit) id lBTEqbWS042747; Sat, 29 Dec 2007 15:52:37 +0100 (CET) (envelope-from franceschini_a@tiscali.it) X-Authentication-Warning: knute.cs.poste.it: andrea set sender to franceschini_a@tiscali.it using -f Date: Sat, 29 Dec 2007 15:52:37 +0100 From: franceschini_a@tiscali.it To: freebsd-hardware@freebsd.org, freebsd-questions@freebsd.org Message-ID: <20071229145237.GA42425@postecom.it> Mail-Followup-To: freebsd-hardware@freebsd.org, freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.3i Cc: Subject: ralink (DWL-G510) transmit power X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 15:13:14 -0000 Hi All, I've changed my old wireless board (Prism II InstantWave HR PCI card) with a new DWL-G510. The driver seems to recognize the card correctly but for some reasons it wouldn't work. After a while I came up with a "solution", the problem was in the range. It is extremely short! 6 meters at most in line of sight! I tried with a 15db gain antenna without success.. and I'm wondering if there's a way to increase the txpower of this card (I tried using ifconfig txpower) Can anyone suggest me a board/chipset with higher transmit power? Thanks in advance. Andrea. From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 15:25:52 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 58ED516A469 for ; Sat, 29 Dec 2007 15:25:52 +0000 (UTC) (envelope-from girishvenkatachalam@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.186]) by mx1.freebsd.org (Postfix) with ESMTP id 2A2B913C4CC for ; Sat, 29 Dec 2007 15:25:52 +0000 (UTC) (envelope-from girishvenkatachalam@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so4290189rvb.43 for ; Sat, 29 Dec 2007 07:25:51 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:received:date:from:to:subject:message-id:reply-to:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent; bh=8ftyZoxHJJQUstmhNWr0KWVTPK0vhBmZmUh1ShxbF0A=; b=CsnTZ+K5FUsNY9F0jHFSRvLxq8eIQzUgbtX/6o+T0YapbHEoMbMfWYQICFn+caQaYN/q1eOoG50jNdm95Mn6GkUZfPJd8wnqKw9newKJxCQplObB4RyQ6OBprgX2EHeznJQBkVaakTFL+dfeAlM9z6nmEB0k3AEjg1hGMNVE1ZM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:subject:message-id:reply-to:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent; b=QbAzrbR3iJkSqyGD1tAacsvCCURQftgyyNISkl/sVhjz1iGpFvErejyykHrj/1YnICn+wboLx2ym/3uZBl1UIOjHNp/IoheiQ3HdDTb3F5/Kv8/FzZ8cct2w9SeZD+RpIK8HaJDhqvZj2Ewkjkw10XoSUIQdN3s31PcyxxvCKFo= Received: by 10.140.169.4 with SMTP id r4mr5405939rve.131.1198941951588; Sat, 29 Dec 2007 07:25:51 -0800 (PST) Received: from brahma.susmita.org ( [59.92.15.77]) by mx.google.com with ESMTPS id g6sm13811943rvb.25.2007.12.29.07.25.50 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 07:25:51 -0800 (PST) Received: by brahma.susmita.org (Postfix, from userid 1002) id 7BBFDCCED; Sat, 29 Dec 2007 20:55:45 +0530 (IST) Date: Sat, 29 Dec 2007 20:55:45 +0530 From: Girish Venkatachalam To: freebsd-questions@freebsd.org Message-ID: <20071229152545.GB14971@brahma.susmita.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <47765E94.3000500@shopzeus.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <47765E94.3000500@shopzeus.com> User-Agent: Mutt/1.5.17 (2007-11-01) Subject: Re: Photo organizer for FreeBSD? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: girishvenkatachalam@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 15:25:52 -0000 On 15:49:56 Dec 29, Laszlo Nagy wrote: > > Hi, > > Can you tell me what kind of software should I use for organizing photos? > Here are my requirements: > > - should be able to handle many photos (right now we are using Picasa on > Ubuntu but for 100 000+ photos it is very slow and unstable) > - should be able to save comments/annotations for the photos (I do not like > Picasa because it uses a special database for that. I would like to have > txt files saved in the same directory where the photos are, or something > similar.) You can trivially do this with the convert command. Refer to my article. http://linuxjournal.com/9566 > - should have a full text search feature (search for photos with given > keywords) This can be easily done. I would guess there would be a third party tool to do this. > - should run on Windows and FreeBSD. (Actually, I would like to burn > self-starting DVDs, so a Python or Perl based GUI would be great) I wonder if netpbm or ImageMagick is available in Cygwin or in some other form in Windows. > Well, if there is a web server based solution, that is fine with me, I need > to burn photos to DVDs and be able to use them. > > Can you recommend something from the ports tree? Or should I write my own > program? You can try this web based solution. I have never tried it, but apparently it would do a lot of heavy-lifting for you. http://gallery.menalto.com/ Best, Girish From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 16:05:04 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C5A6516A41A for ; Sat, 29 Dec 2007 16:05:04 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: from smtpgate2.pacific.net.sg (smtpgate2.pacific.net.sg [203.120.90.32]) by mx1.freebsd.org (Postfix) with SMTP id 50F1B13C45D for ; Sat, 29 Dec 2007 16:05:03 +0000 (UTC) (envelope-from oceanare@pacific.net.sg) Received: (qmail 13594 invoked from network); 29 Dec 2007 16:05:02 -0000 Received: from adsl45.dyn234.pacific.net.sg (HELO P2120.somewherefaraway.com) (oceanare@210.24.234.45) by smtpgate2.pacific.net.sg with ESMTPA; 29 Dec 2007 16:05:01 -0000 Message-ID: <47767025.9030609@pacific.net.sg> Date: Sun, 30 Dec 2007 00:04:53 +0800 From: Erich Dollansky User-Agent: Thunderbird 2.0.0.6 (X11/20070826) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <47765E94.3000500@shopzeus.com> <20071229152545.GB14971@brahma.susmita.org> In-Reply-To: <20071229152545.GB14971@brahma.susmita.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Photo organizer for FreeBSD? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 16:05:04 -0000 Hi, Girish Venkatachalam wrote: > On 15:49:56 Dec 29, Laszlo Nagy wrote: > > I wonder if netpbm or ImageMagick is available in Cygwin or in some > other form in Windows. ImageMagick is available native for Windows. Erich From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 16:24:45 2007 Return-Path: Delivered-To: questions@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8A44016A418 for ; Sat, 29 Dec 2007 16:24:45 +0000 (UTC) (envelope-from mi@aldan.algebra.com) Received: from aldan.algebra.com (aldan.algebra.com [216.254.65.224]) by mx1.freebsd.org (Postfix) with ESMTP id 2F43313C45B for ; Sat, 29 Dec 2007 16:24:44 +0000 (UTC) (envelope-from mi@aldan.algebra.com) Received: from aldan.algebra.com (localhost [127.0.0.1]) by aldan.algebra.com (8.14.1/8.14.1) with ESMTP id lBTGOixf002330 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 29 Dec 2007 11:24:44 -0500 (EST) (envelope-from mi@aldan.algebra.com) Received: (from mi@localhost) by aldan.algebra.com (8.14.1/8.14.1/Submit) id lBTGOiI1002329; Sat, 29 Dec 2007 11:24:44 -0500 (EST) (envelope-from mi) From: "Mikhail T." Message-Id: <200712291624.lBTGOiI1002329@aldan.algebra.com> To: acpi@FreeBSD.org, questions@FreeBSD.org Date: Sat, 29 Dec 2007 11:24:44 -0500 (EST) X-Face: %UW#n0|w>ydeGt/b@1-.UFP=K^~-:0f#O:D7w hJ5G_<5143Bb3kOIs9XpX+"V+~$adGP:J|SLieM31VIhqXeLBli" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 16:24:45 -0000 Hello! I managed to suspend some of my computers a few times (using either ``zzz'' or ``acpiconf -s 1''), but I could never successfully wake the system up after this, requiring a full reboot. What's the proper procedure? I tried the power-button (no effect) and hitting random keyboard keys (no effect). How is it supposed to work? Thanks! -mi From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 16:43:40 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D419F16A418 for ; Sat, 29 Dec 2007 16:43:40 +0000 (UTC) (envelope-from fbsd06+RU=e2136a36@mlists.homeunix.com) Received: from turtle-out.mxes.net (turtle-out.mxes.net [216.86.168.191]) by mx1.freebsd.org (Postfix) with ESMTP id A948013C461 for ; Sat, 29 Dec 2007 16:43:40 +0000 (UTC) (envelope-from fbsd06+RU=e2136a36@mlists.homeunix.com) Received: from mxout-03.mxes.net (mxout-03.mxes.net [216.86.168.178]) by turtle-in.mxes.net (Postfix) with ESMTP id 033561640E1 for ; Sat, 29 Dec 2007 11:22:03 -0500 (EST) Received: from gumby.homeunix.com. (unknown [87.81.140.128]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp.mxes.net (Postfix) with ESMTP id 44EF323E3E8 for ; Sat, 29 Dec 2007 11:22:01 -0500 (EST) Date: Sat, 29 Dec 2007 16:21:58 +0000 From: RW To: freebsd-questions@freebsd.org Message-ID: <20071229162158.496f9fdf@gumby.homeunix.com.> In-Reply-To: References: X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.3; i386-portbld-freebsd7.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: buildworld failure on VIA C3 Nehemiah X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 16:43:40 -0000 On Sat, 29 Dec 2007 10:02:44 -0500 Eric Osterweil wrote: > Do I need a flag in the > make.conf (I just have -pipe and -O2)? If you don't set any such variables in make.conf they get sensible defaults that depend on your CPUTYPE setting. You shouldn't really mess with them unless you have good reason to think you are making an improvement; you may be missing something that's in the default - I don't know. I think the CPU type should be either c3 or c3-2 depending on whether you have 3dnow or sse support. From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 18:10:11 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D349716A420 for ; Sat, 29 Dec 2007 18:10:11 +0000 (UTC) (envelope-from brown_philip@btinternet.com) Received: from web86514.mail.ird.yahoo.com (web86514.mail.ird.yahoo.com [217.146.189.166]) by mx1.freebsd.org (Postfix) with SMTP id 21B8F13C45B for ; Sat, 29 Dec 2007 18:10:10 +0000 (UTC) (envelope-from brown_philip@btinternet.com) Received: (qmail 99731 invoked by uid 60001); 29 Dec 2007 17:43:28 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=VK+8xmEva5ZBwhdyIFXkRfFiDzdhPj7d1u2AnwflxG/VTaQ4gnk4uFq1Rvqwf+2T8/HyxvWuK8k5t22DBh0eIcx0Iq6BMFHYafqztjRiH9QOZq0GsVzwmGaiJJE2B7Ez98zGoD0hZiQErSqgmcBV+qUaffVf+yNdNIWGVFx2lIc=; X-YMail-OSG: YS7UP3UVM1l2ilVWSik_xaQmDZ4.VPDA8ySaSHQTO9Tkzu_PNu9bVj8KE1GGfxyMr9VDt1VmDh.vYTn.m27C9JY- Received: from [86.136.101.183] by web86514.mail.ird.yahoo.com via HTTP; Sat, 29 Dec 2007 17:43:28 GMT X-Mailer: YahooMailRC/818.31 YahooMailWebService/0.7.158.1 Date: Sat, 29 Dec 2007 17:43:28 +0000 (GMT) From: Philip Brown To: freebsd-questions@freebsd.org MIME-Version: 1.0 Message-ID: <651793.99453.qm@web86514.mail.ird.yahoo.com> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: 6.2 Headless Installs Don't Seem to Work. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 18:10:11 -0000 Hi Martin,=0A=0AIf you are still having trouble with headless installs here= is a link to instructions for setting up a bsd.iso that outputs to serial = for a headless installation.=0A=0Ahttp://default-information.blogspot.com/2= 007/12/headless-freebsd-installation-cd.html=0A=0Ahope this helps,=0APhil From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 19:07:48 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C802E16A419 for ; Sat, 29 Dec 2007 19:07:48 +0000 (UTC) (envelope-from warrenhead@gmail.com) Received: from rv-out-0910.google.com (rv-out-0910.google.com [209.85.198.188]) by mx1.freebsd.org (Postfix) with ESMTP id 9A0D513C43E for ; Sat, 29 Dec 2007 19:07:48 +0000 (UTC) (envelope-from warrenhead@gmail.com) Received: by rv-out-0910.google.com with SMTP id l15so4360527rvb.43 for ; Sat, 29 Dec 2007 11:07:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; bh=FD5bUffl2kLfdJmBtuItawBgGoUs5sLcc5oBLUrCBMg=; b=k6J3kO+s5EW13csSFEyUrgBYt+5myWVv61XCN/cVuDZX3yy94h9yO3kvz9aDlF4vuVBh80A1bH8x3rv1LzwTw7XaZwpTr7B5GzRO3t32/Le5isLzlocd7v3GbgjjClCO8/UOhoog9m6qPac/IVs10GjYY6U9Eo5X59iBPnyJhaY= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=ZI56sUetKfTTHDCBUm0v6/4NGYqQi1P40HucgGKfYgkUtnzXSDfZkd3KoBLFUFjL7p3LoBh8UECpisESLvikDQDyiurPESbUIoDEL6GWOE2aoCNXv6HGVZz8yeV3ch8iYBW0YFtL+/VSqPc6g3db3sz9tGrtWDmh6o3bd7slygs= Received: by 10.142.212.19 with SMTP id k19mr3363736wfg.224.1198953626046; Sat, 29 Dec 2007 10:40:26 -0800 (PST) Received: by 10.142.128.1 with HTTP; Sat, 29 Dec 2007 10:40:25 -0800 (PST) Message-ID: <51e113440712291040x505eda52n817fd33be2f2dbf0@mail.gmail.com> Date: Sat, 29 Dec 2007 19:40:25 +0100 From: "Warren Head" To: "Eric Osterweil" In-Reply-To: MIME-Version: 1.0 References: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: FreeBSD Questions Subject: Re: buildworld failure on VIA C3 Nehemiah X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 19:07:48 -0000 2007/12/29, Eric Osterweil : > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Should I be using a different arch? Do I need a flag in the > make.conf (I just have -pipe and -O2)? > > I don't know, but this is what I read on a Gentoo wiki page: (related to bugs in a Gentoo package) http://gentoo-wiki.com/Safe_Cflags Before you submit a bug report, compile with just "-O2 -march=i686 -pipe" > and without "-fomit-frame-pointer" (see > http://bugs.gentoo.org/show_bug.cgi?id=68282 for an explanation.) > Basically the frame-pointer is needed for stack traces. Good luck. Warren From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 19:11:07 2007 Return-Path: Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3C3C816A41B for ; Sat, 29 Dec 2007 19:11:07 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: from mail6.sea5.speakeasy.net (mail6.sea5.speakeasy.net [69.17.117.8]) by mx1.freebsd.org (Postfix) with ESMTP id 1904213C461 for ; Sat, 29 Dec 2007 19:11:07 +0000 (UTC) (envelope-from chuckr@chuckr.org) Received: (qmail 23958 invoked from network); 29 Dec 2007 19:11:06 -0000 Received: from april.chuckr.org (chuckr@[66.92.151.30]) (envelope-sender ) by mail6.sea5.speakeasy.net (qmail-ldap-1.03) with AES256-SHA encrypted SMTP for ; 29 Dec 2007 19:11:06 -0000 Message-ID: <47769B05.6090906@chuckr.org> Date: Sat, 29 Dec 2007 14:07:49 -0500 From: Chuck Robey User-Agent: Thunderbird 2.0.0.6 (X11/20071107) MIME-Version: 1.0 To: bseklecki@collaborativefusion.com References: <20071228023807.GA2501@thought.org> <1198811623.3375.1.camel@new-host> In-Reply-To: <1198811623.3375.1.camel@new-host> X-Enigmail-Version: 0.95.5 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Gary Kline , FreeBSD Mailing List Subject: Re: AAARRRGH: network foul-ups. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 19:11:07 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Brian A. Seklecki (Mobile) wrote: > On Thu, 2007-12-27 at 18:38 -0800, Gary Kline wrote: >> The trouble is that two of my machines report the identical >> private IP: 10.0.0.250. Previously "tao" was 10.0.0.247 and > > > Be sure to flush old entries from: /var/lib/dhclient/dhclient.leases on > DHCP Clients > > ~BAS > > >> "tao2" was 10.0.0.250. Today I switched the names in >> /usr/local/etc/dhcpd.conf, shutdown, and rebooted my >> mailserver--also my DNS server--and the two other computers. > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" Yeah, and also make sure that both machine are reporting the correct I{s in their arp databases. You use the arp -a to list, take a look at the man page arp(8). Arp is one way to enter aliases onto your local net. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdpsFz62J6PPcoOkRAvGYAJ92vTiKbVIRMN0co7B2ENrOGPrmbwCglRDT /VRamGilzXt0ySjSlK4MO1Q= =o1M9 -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 20:06:21 2007 Return-Path: Delivered-To: questions@FreeBSD.ORG Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 263D416A41B for ; Sat, 29 Dec 2007 20:06:21 +0000 (UTC) (envelope-from andrewmd@cp20.heritagewebdesign.com) Received: from cp20.heritagewebdesign.com (cp20.heritagewebdesign.com [209.90.77.43]) by mx1.freebsd.org (Postfix) with ESMTP id 0C5FE13C44B for ; Sat, 29 Dec 2007 20:06:20 +0000 (UTC) (envelope-from andrewmd@cp20.heritagewebdesign.com) Received: from andrewmd by cp20.heritagewebdesign.com with local (Exim 4.68 (FreeBSD)) (envelope-from ) id 1J8hwt-00019L-IM for questions@FreeBSD.ORG; Sat, 29 Dec 2007 13:06:23 -0700 To: questions@FreeBSD.ORG From: Viva Models Content-Transfer-Encoding: 8bit Message-Id: Date: Sat, 29 Dec 2007 13:06:23 -0700 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cp20.heritagewebdesign.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [1018 1019] / [26 6] X-AntiAbuse: Sender Address Domain - cp20.heritagewebdesign.com MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: job opportunity as a model/selling agent X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: modeling@vivamodels.fr List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 20:06:21 -0000 Imagine having an exciting high-paying job as a model or selling agent for new magazine. Imagine having your photo taken for Vogue, your favorite magazine or top sellers companies. You can work online directly from your computer by sending us your picture and making the front page of magazine,company catalog, online advertisement page, and modeling for new wesbites with your picture on the home page. We are looking for models for models or selling agent for new magazine,both male and female. Models will need to have excellent skin, natural looking and good body figure(fat or thin). As a model,actress or actors you may have the opportunity to travel to beautiful locations, be pampered, attend events with celebrities everything sponsored and earn thousands of dollars a day. Modeling can also lead to many other fabulous opportunities. As a model your work may involve: ***Working directly from your computer at home . ***Editorial (magazine and newspaper) modeling . ***Print advertisements for bookseller companies. ***Catalog and brochures modeling for retail stores, custom salons or specialty stores. ***Salary Range: $5,000.00 - $50,000.00/ engagement. ***Salaries can be vary. ***Gender: Female / Male ***Age: from 18 to 36 ***Ethnicity: Any - ***Hair Color: Any - ***Body Type: Any - As a Selling Agent your work may involve: ***Working directly from your computer at home . ***Selling magazine online through auction or classified sites. ***Receiving payment from buyers. ***Calling and staying in Contact with buyers. ***Gender: Female / Male ***Age: from 22 to 50 ***Salary Range: Salary Range: $10,000.00 - $35,000.00/ per month ***Salaries can be vary. Qualifications: Education Some college degrees or coursework in Art, Drama, Dance, or Fashion Design is helpful. Experience none required but we need someone who enjoying modeling but experience are required for a Selling Agent in customer service duties. Personal Characteristics/Skills photogenic and physically attractive and body measurements falling within certain industry standards; familiarity with different modeling techniques, formal fashion show procedures and the use of cosmetics; excellent fashion style; good people skills; self-discipline; a positive attitude for models. **** To apply as a Selling Agent or applying as a model, both male and female please send your CV/Resume to our email: vivamodels@temporaryforwarding.com VIVA MODELING AND MAGAZINE AGENCY http://www.vivamodels.fr/ From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 20:37:15 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0310416A474 for ; Sat, 29 Dec 2007 20:37:15 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.178]) by mx1.freebsd.org (Postfix) with ESMTP id DFE3713C461 for ; Sat, 29 Dec 2007 20:37:13 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6784426waf.3 for ; Sat, 29 Dec 2007 12:37:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=5BwdqwYFHuDutyOWWB6A9DbLL/dNHQhCVKZduVsz1wE=; b=U3C3Gxb4OVqzFZ00qyXxVeJofVqg9XgQnnnl4mFwysP8NNdK1Q8T7MpY9NZhVhA+c8k9zB802KAN8nep9NpMHmvHXGNTzNbC7kQzVnfMMxWgRQRxEgJYTyv9YoQUHDdg1ynCZCclBujxLe4OIHgUQIYbaRs1kzNM6tTFDjb1u2I= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=iFpnr0n2N2jyPLUKvIO3gtvICmVIOIDD5sUmxF48uqYm8jbS6FE05nmNw6bFc+MrrCT1OHYTb5HTAL5sYsXluW+vV9zLpgrJTJ/oMsN90WdZnX0NOyVOS1+84yV7bHEtISv8u7HhWw5xNswkTIT4TL19vJNBPNsg7v9+q7AczkQ= Received: by 10.114.204.7 with SMTP id b7mr11212452wag.124.1198960633479; Sat, 29 Dec 2007 12:37:13 -0800 (PST) Received: from sniper ( [71.221.168.29]) by mx.google.com with ESMTPS id m30sm18108173wag.45.2007.12.29.12.37.12 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 12:37:12 -0800 (PST) From: Andrew Falanga To: FreeBSD Questions Date: Sat, 29 Dec 2007 13:36:58 -0700 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712291336.58690.af300wsm@gmail.com> Subject: Having problems with SMTP authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 20:37:15 -0000 HI, I've followed the instructions @ http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/smtp-auth.html, but am still having problems with the authentication process. If I set my client to use either CRAM-MD5 or DIGEST-MD5, I get an error return of authentication failure, "most likely the password is wrong." Now, to make sure that I'm understanding this correctly, this program (saslauthd) takes the username and passwords given it and attempts to verify them against what the system knows to be it's users, correct? Working under this assumption, it would seem that the user vmail (a user I created on the system) would be the user that I would want to use in the e-mail client. Well, I've done this and verified that the password is, in fact, correct; I'm unable to authenticate to the SMTP server. Another point of interest, I added these lines (from the handbook) to my freebsd.mc file (as per instructions): dnl set SASL options TRUST_AUTH_MECH(`GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl define(`confAUTH_MECHANISMS', `GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl But when I ask my e-mail client to "check what the server supports", the returned list is only, GSSAPI, DIGEST-MD5 and CRAM-MD5. Why is LOGIN not listed when it's included in this macro file? Is there anything missing from this section of the handbook that I've missed? Andy From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 20:51:13 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3D61716A419 for ; Sat, 29 Dec 2007 20:51:13 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (gate6.infracaninophile.co.uk [IPv6:2001:8b0:151:1::1]) by mx1.freebsd.org (Postfix) with ESMTP id 8A53813C468 for ; Sat, 29 Dec 2007 20:51:12 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.14.2/8.14.2) with ESMTP id lBTKp6BK037383; Sat, 29 Dec 2007 20:51:07 GMT (envelope-from m.seaman@infracaninophile.co.uk) X-DKIM: Sendmail DKIM Filter v2.4.1 smtp.infracaninophile.co.uk lBTKp6BK037383 Authentication-Results: smtp.infracaninophile.co.uk; dkim=hardfail (SSP) header.i=unknown Message-ID: <4776B33A.4050105@infracaninophile.co.uk> Date: Sat, 29 Dec 2007 20:51:06 +0000 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 2.0.0.9 (X11/20071122) MIME-Version: 1.0 To: Andrew Falanga References: <200712291336.58690.af300wsm@gmail.com> In-Reply-To: <200712291336.58690.af300wsm@gmail.com> X-Enigmail-Version: 0.95.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (smtp.infracaninophile.co.uk [IPv6:::1]); Sat, 29 Dec 2007 20:51:07 +0000 (GMT) X-Virus-Scanned: ClamAV 0.92/5284/Sat Dec 29 18:14:47 2007 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.0 required=5.0 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.2.3 X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on happy-idiot-talk.infracaninophile.co.uk Cc: FreeBSD Questions Subject: Re: Having problems with SMTP authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 20:51:13 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Andrew Falanga wrote: > dnl set SASL options > TRUST_AUTH_MECH(`GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl > define(`confAUTH_MECHANISMS', `GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl > > But when I ask my e-mail client to "check what the server supports", the > returned list is only, GSSAPI, DIGEST-MD5 and CRAM-MD5. Why is LOGIN not > listed when it's included in this macro file? Is there anything missing from > this section of the handbook that I've missed? LOGIN will only be enabled over an encrypted connection. All you need to do to enable the stock sendmail to support STARTTLS is tell it to use one or more SSL certs. Adding something like this to /etc/mail/`hostname`.mc is how to do that: dnl dnl TLS stuff dnl define(`CERT_DIR', `MAIL_SETTINGS_DIR`'certs')dnl define(`confCACERT_PATH', `CERT_DIR')dnl define(`confCACERT', `CERT_DIR/cacert.pem')dnl define(`confSERVER_CERT', `CERT_DIR/cert.pem')dnl define(`confSERVER_KEY', `CERT_DIR/key.pem')dnl define(`confCLIENT_CERT', `CERT_DIR/cert.pem')dnl define(`confCLIENT_KEY', `CERT_DIR/key.pem')dnl Which means you'ld put the PEM encoded cacert, key and cert into /etc/mail/cacert.pem, /etc/mail/key.pem and /etc/mail/key.cert respectively. To generate all of those, there are some pithy instructions here: http://www.sendmail.org/~ca/email/other/cagreg.html When submitting a new message, most mail clients will automatically do STARTTLS if it's available. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHdrM68Mjk52CukIwRCHdTAJ9oUv7PNaV41xopL9/uw1UMcx1gDACghT4Z orlyowTjs5ZXPsv+7B/nebg= =LWRP -----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:24:56 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AB72316A46B for ; Sat, 29 Dec 2007 22:24:56 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.181]) by mx1.freebsd.org (Postfix) with ESMTP id 7F4B513C46E for ; Sat, 29 Dec 2007 22:24:56 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6841385waf.3 for ; Sat, 29 Dec 2007 14:24:56 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=ahrM0RvPRhxK9Gr8G9sPBy+kGmvQDgOdRe02hIaPZcI=; b=KZUfpRZjFIC43zC3AdNbcQe2tDCugIjNZD5076edzyWLuK7pPaEoNZULBohOkK7ZSWI81egyF3PLySolMonPNzwqlbvZSMgflQHO/O7k0OkHoxF7+xAUI+yK8qGqEExjRpo7a6gh3mZFtHRRT4x1vNk1Tx9KBn6IP8QSMYs+OFs= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=hJcL6p5on7Q4M0WHLhO8/DppIngMqrbQ+QrdCr9L0MiUa3rqU871ruUWdoV7iUm90RyfH7PD/7uxuhWb8jKdn5D2gsz3SKBrXJD1iuCwYL7PlqlLeb3a2/M6wfmjXtE1rvH1mOyY/OvBtms9E/dCOIhyzXdjU0qNcVWAmyF74Wo= Received: by 10.114.144.1 with SMTP id r1mr11300599wad.53.1198967096032; Sat, 29 Dec 2007 14:24:56 -0800 (PST) Received: from sniper ( [71.221.168.29]) by mx.google.com with ESMTPS id j38sm6939673waf.54.2007.12.29.14.24.53 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 14:24:54 -0800 (PST) From: Andrew Falanga To: Matthew Seaman Date: Sat, 29 Dec 2007 15:24:42 -0700 User-Agent: KMail/1.9.6 References: <200712291336.58690.af300wsm@gmail.com> <4776B33A.4050105@infracaninophile.co.uk> In-Reply-To: <4776B33A.4050105@infracaninophile.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712291524.42466.af300wsm@gmail.com> Cc: FreeBSD Questions Subject: Re: Having problems with SMTP authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:24:56 -0000 On Saturday 29 December 2007 13:51:06 Matthew Seaman wrote: > Andrew Falanga wrote: > > dnl set SASL options > > TRUST_AUTH_MECH(`GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl > > define(`confAUTH_MECHANISMS', `GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN')dnl > > > > But when I ask my e-mail client to "check what the server supports", the > > returned list is only, GSSAPI, DIGEST-MD5 and CRAM-MD5. Why is LOGIN not > > listed when it's included in this macro file? Is there anything missing > > from this section of the handbook that I've missed? > > LOGIN will only be enabled over an encrypted connection. All you need > to do to enable the stock sendmail to support STARTTLS is tell it to > use one or more SSL certs. Adding something like this to > /etc/mail/`hostname`.mc is how to do that: this seems to imply you want me to create a file named .mc. The instructions I followed in the handbook also mentioned that, "Many administrators choose to use the output from hostname(1) as the .mc file for uniqueness." Do I have to make this new file, paste into it all the stuff in "freebsd.mc" and then add these lines too? > > dnl > dnl TLS stuff > dnl > define(`CERT_DIR', `MAIL_SETTINGS_DIR`'certs')dnl > define(`confCACERT_PATH', `CERT_DIR')dnl > define(`confCACERT', `CERT_DIR/cacert.pem')dnl > define(`confSERVER_CERT', `CERT_DIR/cert.pem')dnl > define(`confSERVER_KEY', `CERT_DIR/key.pem')dnl > define(`confCLIENT_CERT', `CERT_DIR/cert.pem')dnl > define(`confCLIENT_KEY', `CERT_DIR/key.pem')dnl > > Which means you'ld put the PEM encoded cacert, key and cert into > /etc/mail/cacert.pem, /etc/mail/key.pem and /etc/mail/key.cert > respectively. To generate all of those, there are some pithy > instructions here: > > http://www.sendmail.org/~ca/email/other/cagreg.html Thanks for all this. Andy > > When submitting a new message, most mail clients will automatically > do STARTTLS if it's available. > > Cheers, > > Matthew From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:26:00 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B5F7B16A420 for ; Sat, 29 Dec 2007 22:26:00 +0000 (UTC) (envelope-from lists@lizardhill.com) Received: from kermit.lizardhill.com (kermit.lizardhill.com [64.69.41.217]) by mx1.freebsd.org (Postfix) with ESMTP id A291213C474 for ; Sat, 29 Dec 2007 22:26:00 +0000 (UTC) (envelope-from lists@lizardhill.com) Received: from ip72-193-85-114.lv.lv.cox.net ([72.193.85.114] helo=mickey) by kermit.lizardhill.com with esmtpa (Exim 4.62) (envelope-from ) id 1J8jWg-000COq-52 for freebsd-questions@freebsd.org; Sat, 29 Dec 2007 13:47:26 -0800 From: "Don O'Neil" To: Date: Sat, 29 Dec 2007 13:46:13 -0800 Message-ID: <002901c84a64$3b82ec00$0e00020a@mickey> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 Thread-Index: AchKZDs5TURooncrToOML+BOcrSMpg== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198 Subject: Port Updates for 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:26:00 -0000 What is the safest and cleanest way to update the ports in /usr/ports for a 6.1-STABLE install? I don't want to risk breaking anything, I just need some updated ports so I can install the latest SpamAssassin port. Thanks! From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:29:13 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1EB2F16A41A for ; Sat, 29 Dec 2007 22:29:13 +0000 (UTC) (envelope-from WD@US-Webmasters.com) Received: from server1.grabweb.com (split.grabweb.net [67.15.22.16]) by mx1.freebsd.org (Postfix) with ESMTP id C6D2E13C44B for ; Sat, 29 Dec 2007 22:29:12 +0000 (UTC) (envelope-from WD@US-Webmasters.com) Received: (qmail 30353 invoked from network); 29 Dec 2007 16:29:09 -0600 Received: from batv-01-192.dsl.netins.net (HELO Sabrina.US-Webmasters.com) (207.199.193.192) by uswdns.net with (DHE-RSA-AES256-SHA encrypted) SMTP; 29 Dec 2007 16:29:09 -0600 X-Mailer: QUALCOMM Windows Eudora Version 7.1.0.9 Date: Sat, 29 Dec 2007 16:28:36 -0600 To: freebsd-questions@freebsd.org From: "W. D." In-Reply-To: References: <20071221073023.70F3113C447@mx1.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <20071229222912.C6D2E13C44B@mx1.freebsd.org> Cc: Ian Smith Subject: Re: IPFW: Blocking me out. How to debug? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:29:13 -0000 At 08:49 12/22/2007, Ian Smith wrote: >Warning: overlong message. > > > > >W. D. wrote: > > OK, sorry. I guess I just assumed that it would be obvious=20 > > that this is a Web server. ("Never assume anything, my good=20 > > fellow" - Sherlock Holmes). =20 > > By the way, it is/will be running Plesk server management > > software, if it matters: > > http://www.swsoft.com/en/products/plesk/reqs/ > >I know nothing of Plesk, but doubt it's relevant to this now. > > > Also, this server is on an internal LAN before I subject > > it to the wild, untamed, InterWeb, with its dangerous > > internets darting back and forth inside all of the tubes. > >Really good idea :) > > > > > >> add allow all from any to any via lo0 > > > > >> add deny ip from any to 127.0.0.0/8 > > > > >> add deny ip from 127.0.0.0/8 to any > > > > > >That's ok. It may help you in debugging what's happening to use: > >=20 > > allow log tcp from any to any in established > > allow log tcp from any to any out established >In that case 'me to any' or 'any to me' provides unambiguous direction >where appropriate. As shown in your ipfw show below, direction can help >make things clear, and clarity means safety when it comes to firewalls, >even if it means a slightly larger ruleset. > > > > > >> # Deny fragmented packets: > > > > >> add deny ip from any to any frag > >=20 > > > > >> # Show pings: > > > > >> add count icmp from any to any icmptypes 8 in > > > > > > > > > > >That's inbound ping requests. Don't forget that 'inbound' means coming > > >into the firewall, not necessarily from the outside world. Your own > > >ping requests _from_ this box also have to both come in, and go out.=20 > >=20 > > Hmmm. OK. Outbound Ping will be rarely used, but should > > be allowed. Isn't that included in the next rule? > >Yes it is, so here ambiguous directionality works ok, as long as you're >well aware of it. >=20 > > > > >> # Allow pings, ping replies, and host unreach: > > > > >> add allow icmp from any to any icmptypes 0,8,3 > > > > > >Add icmptype 11 as well if you want traceroutes to work .. > > > >Ok, though udp rules are often better done statefully. See below. > > > > > > > >> # Allow DNS with name server > > > > >> add allow udp from any to any domain out > > > > >> add allow udp from any domain to any in > > > > >Nope. > > > > > >You want to watch out here. This allows udp packets from any address > > >with source port 53 to connect with any open udp port on your system, > > >and allows the responses as well. It's a simple matter using such as > > >netcat to source packets from port 53.=20 > >=20 > > Should I restrict it by specifically stating the service? > > How can I be safe? What would the rule look like?=20 > >=20 > > >I gather from this that you're not running a DNS server yourself, but > > >using upstream server/s? In that case a stateful rule is safer: > >=20 > > Again, I apologize for not being clear. I will be running > > DNS on this box for the domains being hosted. So, it will > > be polled whenever a request for a hosted domain is needed. > >Ok, so your nameserver will be making upstream requests too, and you'll >need to do TCP 53 traffic with your secondary nameserver/s as well as >UDP 53 traffic with upstream nameservers, up to the root unless you're >only using specified upstream forwarders. Given that you're checking TCP >setup, allowing established, then maybe: > > allow udp from me to any 53 out keep-state # my requests > allow udp from any to me 53 in keep-state # serve outside requests > allow tcp from me to $secondaries 53 setup # zone transfers out > allow tcp from $secondaries to me 53 setup # zone transfers in What is $secondaries? > >though you'll want to protect named with ACLs for xfers as well. "ACLs"? What are those? > > > > >> # SSH > > > > >> # Note that /etc/hosts.allow has restrictions > > > > >> # on which IP addresses are allowed. > > > > >> # > > > > >> # Allow SSH: > > > > >> add allow tcp from any to any ssh in setup > > > > > >By 'ssh working', I guess you mean ssh connections to this box from > > >elsewhere, rather than ssh connections from this box? Not clear. > >=20 > > Sorry! I am using SSH into this box, since it is easier to > > cut and paste for editing and configuration. > >=20 > > I can't really see a situation where I would normally need to SSH > > outbound, can you? I use the Windoze boxes for that. > >You never know; you may want to use ssh or scp to other boxes, for >backups and such, but you can always add rules whenever required. > > > > > >> # HTTP & HTTPS: > > > > >> add allow tcp from any to any https in setup > > > > >> add allow tcp from any to any http in setup > > > > > > > > >access to only your LAN. Will this webserver later have a public IP >address, or run behind NAT with port forwarding?=20 Public IP. > > > > > >> # FTP: > > > > >> add allow tcp from any to any ftp in setup > > > > >> add allow tcp from any to any ftp\-data in setup > > > > >> add allow tcp from any ftp\-data to any setup out > > > >Mmm, I prefer using and enforcing FTP passive mode, but YMMV. > >=20 > > How would I do that? This guy doesn't think it's even=20 > > possible: > > http://tinyurl.com/2z6ynr > >Mmm, ok. Passive mode needs allowing connections to this port range > net.inet.ip.portrange.hifirst: 49152 > net.inet.ip.portrange.hilast: 65535 >which is adjustable, but I'm unsure of my ground regarding ftp - pass. How would I write this as a rule? > > > # Allow access to our WWW > > > ${fwcmd} add pass tcp from any to ${oip} 80 setup > > > > > > # Reject&Log all setup of incoming connections from the outside > > > ${fwcmd} add deny log tcp from any to any in via ${oif} setup > > > > > > # Allow setup of any other TCP connection > > > ${fwcmd} add pass tcp from any to any setup > >=20 > > I really don't get the above rule. Isn't it saying that > > *any* kind of TCP connection can come in or go out initially? > >Yes, but only AFTER denying & logging any unaccounted for inbound setup >requests on the outside interface. The last rule therefore allows setup >of a) TCP requests from this box to anywhere, and b) setup requests from >any boxes 'behind' this box on the LAN. You don't have any (b) but may >need (a) to access external services (anything: c{,v}sup comes to mind);=20 >you may rather limit these to specific services or from uid root etc, >and having no other interfaces, can use from 'me' rather than 'any'. > > > In my set, should I include some "out" rules like this: > >=20 > > add allow tcp from any to any https out setup > > add allow tcp from any to any http out setup > >Again, 'any to any' is too broad a brush. Once you allow everything you >want to in from outside addresses (which currently includes your LAN on >your outside interface!) and then deny the rest there, then 'pass tcp >from me to any setup' is safe, and covers the above, and anything else. > > > > > should allow connections that are "setup" to=20 > > > > continue. Do I need a "check-state" or "keep-state" > > > > statement somewhere? > > > > > >No, though you can use stateful TCP rules if you want to, in which case > > >you'll want to DENY established connections. Personally I find relying > > >on the TCP state established by using 'setup' and 'established' fine= for > > >TCP, but tend to use keep-state for UDP and some ICMP rules.=20 > >=20 > > That sounds reasonable. >Since you've logged some denied packets, searching denied packets in >/var/log/security should show you exactly what they are to debug this, >no need to speculate. However for this rule try maybe 'logamount 500' >along with running tcpdump in another console till you spot the problem. > >Whenever you like, without reloading others, you can do eg: > > # ipfw delete 2400; ipfw add 2400 deny log logamount 500 ip from any to= any=20 > >and of course run 'ipfw resetlog 2400' anytime you want some more. > > > > > Besides adding the "log" keyword on all of the rules, > > > > these are the debugging tools I have been using: > > > >=20 > > > > ipfw disable firewall > > > > ipfw -f flush > > > > ipfw enable firewall > > > > /etc/rc.d/ipfw start > > > > ipfw -a -S -N -t list > > > > ipfw list =20 > > > > tail -f /var/log/ipfw/ipfw.log > >Ah right, you're not using /var/log/security. Is ipfw.log working ok? > > > > > tcpdump -i nve0 'proto \tcp && port http' > >Doesn't that show incoming http setup requests, and responses (or not)? > >I'd use 'tcpdump -pn -i nve0 tcp port 80' to keep it simple and numeric.=20 > > > netstat -finet -a > > > >=20 > > Am using this link, since "man ipfw" doesn't work on 6.2. (I dare > > someone to explain to me how to get it to work): > > http://www.freebsd.org/cgi/man.cgi?query=3Dipfw&sektion=3D8 > >That's weird. Does man work for others in section 8, eg man mount ?=20 Nope. How to get working? Here is my latest /etc/ipfw.rules. Please critique: # Filename: ipfw.rules # Description: ipfw firewall ruleset # Locattion: /etc/ipfw.rules # Date: 2007 Dec 29 # By default, everything is denied access. You # need to specifically allow something for it # to work. # Debugging tools: # # Check the syntax of the rules file: # =20 # ipfw -n /etc/ipfw.rules # # # Stop, then restart ipfw: #=20 # ipfw disable firewall; /etc/rc.d/ipfw start # # # Flush rules: # # ipfw -f flush # # # List firewall hits: # # ipfw -a -S -N -t list # # # Zero out hits counter: # # ifpw zero # # # View the log: # # tail -f /var/log/ipfw/ipfw.log # # Others: # # ipfw show # tcpdump -i nve0 'proto \tcp && port http' # netstat -finet -a # Loopback: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Allow anything on the local loopback: add allow all from any to any via lo0 # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Disallow Spoofers: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D # # For more info, see:=20 # RFC3330 # http://en.wikipedia.org/wiki/Private_network =20 # # "This" Network: add deny log ip from any to 0.0.0.0/8 in add deny log ip from 0.0.0.0/8 to any in # IANA Reserved: add deny log ip from any to 1.0.0.0/8 in add deny log ip from 1.0.0.0/8 to any in # IANA Reserved: add deny log ip from any to 2.0.0.0/8 in add deny log ip from 2.0.0.0/8 to any in # Class A Private Network: add deny log ip from any to 10.0.0.0/8 in add deny log ip from 10.0.0.0/8 to any in # Localhost: add deny log ip from any to 127.0.0.0/8 in add deny log ip from 127.0.0.0/8 to any in # Link Local/Auto-Config: add deny log ip from any to 169.254.0.0/16 in add deny log ip from 169.254.0.0/16 to any in # Class B Private Network: add deny log ip from any to 172.16.0.0/12 in add deny log ip from 172.16.0.0/12 to any in # TEST-NET/Examples: add deny log ip from any to 192.0.2.0/24 in add deny log ip from 192.0.2.0/24 to any in # Class C Private Network: add deny log ip from any to 192.168.0.0/16 in add deny log ip from 192.168.0.0/16 to any in # IPV6to4 relay anycast addresses: add deny log ip from any to 192.88.99.0/24 in add deny log ip from 192.88.99.0/24 to any in # Interconnect Benchmarks: add deny log ip from any to 198.18.0.0/15 in add deny log ip from 198.18.0.0/15 to any in # Multicast: add deny log ip from any to 224.0.0.0/3 in add deny log ip from 224.0.0.0/3 to any in # Class E Reserved: add deny log ip from any to 240.0.0.0/4 in add deny log ip from 240.0.0.0/4 to any in # Spoofers =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Initialize the system to keep track of states: add check-state # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Allow already established connections. These # connections are allowed by the subsequent # rules listed below this one. add allow tcp from any to me in established add allow tcp from me to any out established # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Deny fragmented packets: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D add deny log ip from any to any frag # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # ICMP - Pings: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Count inbound pings (8 =3D Echo Request) add count icmp from any to any icmptypes 8 in # Allow pings, ping replies, and host unreach: # 0 =3D Echo Reply # 3 =3D Destination Unreachable # 8 =3D Echo Request # 11 =3D Time-to-Live exceeded (for traceroute) add allow icmp from any to any icmptypes 0,8,3,11 # ICMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Allow UDP traceroutes: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D add allow udp from any to any 33434-34458 in add allow udp from any 33434-34458 to any out # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # DNS (Port 53): =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D # add allow udp from any to any domain out # add allow udp from any domain to any in # My DNS requests add allow udp from me to any 53 out keep-state # Serve outside DNS requests add allow udp from any to me 53 in keep-state=20 # DNS Zone transfers out # ??? add allow tcp from me to $secondaries 53 setup =20 # DNS Zone transfers in # ??? add allow tcp from $secondaries to me 53 setup # DNS =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # SSH (Port 22) =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Note that /etc/hosts.allow has restrictions # on which IP addresses are allowed. # add allow tcp from any to me ssh in setup add allow tcp from me to any ssh in setup # SSH =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # HTTP: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # HTTP (Port 80): add allow tcp from any to me http in setup add allow tcp from me to any http in setup # HTTPS (Port 443): add allow tcp from any to me https in setup # HTTPS for Plesk Server Administrator (Port 8443): add allow tcp from any to me dst-port 8443 in setup # HTTP =3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # MAIL: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # POP3 (Port 110) add allow tcp from any to me pop3 in setup # POP3S (Port 995) add allow tcp from any to me pop3s in setup # SMTP (Port 25): add allow tcp from any to me smtp in setup # SMTPS (Port 465): add allow tcp from any to me smtps in setup # IMAP (Port 143): add allow tcp from any to me imap in setup # IMAPS (Port 993): add allow tcp from any to me imaps in setup # MAIL =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # FTP (Port 21): =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add allow tcp from any to me ftp in setup add allow tcp from me to any ftp in setup # FTP Data (Port 20): add allow tcp from any to me ftp\-data in setup add allow tcp from any ftp\-data to me setup out # FTP Passive (Ports 10000-65000): add allow tcp from me to any 10000-65000 in setup # FTPS (Port 990): add allow tcp from any to me ftps in setup add allow tcp from me to any ftps in setup # FTP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Allow NTP in and out to Navobs.WUstl.edu: add allow udp from me ntp to 128.252.19.1 ntp out add allow udp from 128.252.19.1 ntp to me ntp in # NTP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Allow UserID of "root" unfettered access: add allow tcp from me to any out setup uid root # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # MySQL (Port 3306): =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D # add allow tcp from any to me 3306 in setup # add allow tcp from me to any 3306 in setup # MySQL =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # PgSQL (Port 5432): =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D # add allow tcp from any to me 5432 in setup # add allow tcp from me to any 5432 in setup # PgSQL =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # TomCat (Port 9080): =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D # add allow tcp from any to me 9080 in setup # add allow tcp from me to any 9080 in setup # TomCat =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Plesk Server Administrator - PSA =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Get updates on port 5224 add allow tcp from me to 64.131.90.31 dst-port 5224 out setup # add allow tcp from 64.131.90.31 to me dst-port 5224 in setup # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D # Deny and log everything else: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D add deny log ip from any to me in add deny log ip from any to me out add deny log ip from me to any in add deny log ip from me to any out add deny log udp from any to me in add deny log udp from any to me out add deny log udp from me to any in add deny log udp from me to any out # =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Start Here to Find It Fast!=99 ->= http://www.US-Webmasters.com/best-start-page/ $8.77 Domain Names -> http://domains.us-webmasters.com/ From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:40:17 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 66A8916A41B for ; Sat, 29 Dec 2007 22:40:17 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wx-out-0506.google.com (wx-out-0506.google.com [66.249.82.230]) by mx1.freebsd.org (Postfix) with ESMTP id 1A2EB13C478 for ; Sat, 29 Dec 2007 22:40:16 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: by wx-out-0506.google.com with SMTP id i29so1169127wxd.7 for ; Sat, 29 Dec 2007 14:40:16 -0800 (PST) Received: by 10.70.80.14 with SMTP id d14mr7372209wxb.12.1198968015953; Sat, 29 Dec 2007 14:40:15 -0800 (PST) Received: from scorpio ( [67.189.206.211]) by mx.google.com with ESMTPS id i34sm43032173wxd.9.2007.12.29.14.40.14 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 14:40:15 -0800 (PST) Date: Sat, 29 Dec 2007 17:40:03 -0500 From: Gerard To: freebsd-questions@freebsd.org Message-ID: <20071229174003.3aa34507@scorpio> In-Reply-To: <200712291524.42466.af300wsm@gmail.com> References: <200712291336.58690.af300wsm@gmail.com> <4776B33A.4050105@infracaninophile.co.uk> <200712291524.42466.af300wsm@gmail.com> Organization: seibercom.net X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.3; i386-portbld-freebsd6.2) Face: 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 X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxcR nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q User-Agent: Claws Mail 3.0.2 (GTK+ 2.12.3; i386-portbld-freebsd6.2) Mime-Version: 1.0 Content-Type: multipart/signed; boundary="Sig_/_pgEdT+bne=X4hXd.kPQi/b"; protocol="application/pgp-signature"; micalg=PGP-SHA1 Subject: Re: Having problems with SMTP authentication X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: FreeBSD Question List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:40:17 -0000 --Sig_/_pgEdT+bne=X4hXd.kPQi/b Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable On Sat, 29 Dec 2007 15:24:42 -0700 Andrew Falanga wrote: [snip] > this seems to imply you want me to create a file named > .mc. The instructions I followed in the handbook also > mentioned that, "Many administrators choose to use the output from > hostname(1) as the .mc file for uniqueness." Do I have to make this > new file, paste into it all the stuff in "freebsd.mc" and then add > these lines too? It has been ages since I worked with Sendmail; however, I believe all you have to do, after configuring the /etc/mail/*.mc files, is run: make all install restart in the /etc/mail directory. Be sure to read the documentation in each of the *.mc files. If you have not all ready done so, check out the aliases file and modify as required. Be sure to run 'newaliases' when finished. If I remember correctly, the new *.cf files will be in the form of "hostname.cf". You could always use Postfix. It is a lot easier. --=20 Gerard gerard@seibercom.net O give me a home, Where the buffalo roam, Where the deer and the antelope play, Where seldom is heard A discouraging word, 'Cause what can an antelope say? --Sig_/_pgEdT+bne=X4hXd.kPQi/b Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHdszL6DWTaTcTwMkRAsfdAKDg/RkSlBBRyqh1pyMOjH2j5TOYpQCgmgfW qMhPcb0169RVtW59EwT8HaY= =PXhd -----END PGP SIGNATURE----- --Sig_/_pgEdT+bne=X4hXd.kPQi/b-- From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:41:44 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5D35B16A46B for ; Sat, 29 Dec 2007 22:41:44 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.182]) by mx1.freebsd.org (Postfix) with ESMTP id 3367013C45A for ; Sat, 29 Dec 2007 22:41:43 +0000 (UTC) (envelope-from af300wsm@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6850488waf.3 for ; Sat, 29 Dec 2007 14:41:43 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; bh=KX7wowNkLJ9u5ly1psIgHDc8LhJwGv3ep+hPTvVsK3o=; b=KfLUR+ccB/Xwr034rlNNMf/RUgb0I8XD+ZyBfY0gSnojhfIjKywHUU6D9bUePCrhxa67ZpSQQEWvOMOKFbMX40AX2Z3vRmGo1LK1CkC18iI4rLzkdi+nwrldxDiDR6gN+RSIZBJ+KKK2EouNb2DfSLnQZnIsnJlaygNhsP7zX2U= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:mime-version:content-type:content-transfer-encoding:content-disposition:message-id; b=LNtf9/HVD1ORUVEHng+eLEwxbyPno7fCEoGQHKhgRoT3HqLkrkoSp63I9DorTBpVW8zywtk0m+G4WOzMEpDwxC0kyl4wsxfQcZh0f/8F/A3fOsF7KHsxhmZq1n8YZxthWX5ylEONUBSZEEfY+JKH7nEMxTHMX/IbjkJllcUClWM= Received: by 10.114.52.1 with SMTP id z1mr9416340waz.123.1198968103674; Sat, 29 Dec 2007 14:41:43 -0800 (PST) Received: from sniper ( [71.221.168.29]) by mx.google.com with ESMTPS id m31sm18232352wag.28.2007.12.29.14.41.43 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 14:41:43 -0800 (PST) From: Andrew Falanga To: FreeBSD Questions Date: Sat, 29 Dec 2007 15:41:34 -0700 User-Agent: KMail/1.9.6 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712291541.34266.af300wsm@gmail.com> Subject: Still having problems burning DVDs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:41:44 -0000 Ok, Thanks to the help of earlier posts (a couple of weeks ago), using "kldload atapicam" now allows for the scsi ioctls on my IDE CD/DVD burner. However, when I do the following: growisofs -Z /dev/cd0 -dvd-video /usr/local/dvds/whereisGod1.iso I get this output: Executing 'mkisofs -dvd-video /usr/local/dvds/whereisGod1.iso | builtin_dd of=/dev/pass0 obs=32k seek=0' mkisofs: Value too large to be stored in data type. File /usr/local/dvds/whereisGod1.iso is too large - ignoring mkisofs: Unable to make a DVD-Video image. :-( write failed: Input/output error Now, what is causing this? The command I'm using is right off of the handbook for creating DVD video: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-dvds.html And the size of this file is: -rw-r--r-- 1 root wheel 4317872128 Nov 21 16:30 whereisGod1.iso That's slightly smaller than the 4.7 gb that the DVD+R says it will hold. Please keep in mind that this iso file I've made is from doing: cp /dev/acd0 /usr/local/dvds/whereisGod1.iso Andy From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 22:58:42 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CAD9C16A41A for ; Sat, 29 Dec 2007 22:58:42 +0000 (UTC) (envelope-from joey@mingrone.org) Received: from fk-out-0910.google.com (fk-out-0910.google.com [209.85.128.187]) by mx1.freebsd.org (Postfix) with ESMTP id 6896113C474 for ; Sat, 29 Dec 2007 22:58:42 +0000 (UTC) (envelope-from joey@mingrone.org) Received: by fk-out-0910.google.com with SMTP id b27so6239213fka.11 for ; Sat, 29 Dec 2007 14:58:41 -0800 (PST) Received: by 10.78.133.2 with SMTP id g2mr13476913hud.26.1198967395898; Sat, 29 Dec 2007 14:29:55 -0800 (PST) Received: by 10.78.123.14 with HTTP; Sat, 29 Dec 2007 14:29:55 -0800 (PST) Message-ID: Date: Sat, 29 Dec 2007 18:29:55 -0400 From: "Joey Mingrone" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: font problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 22:58:42 -0000 Over the holidays I decided to upgrade my ports after several months and everything went well except some fonts seems to be messed up. Sorry, I'm not really sure how to explain this better. Here is a screenshot of gkrellm: http://jrm.ath.cx/misc/messed_up_fonts.png As you can see, the fonts are so large they overlap. I didn't change any of my configuration files (xorg.conf, ~/fonts.conf, ~/.gtkrc-2.0, etc). The problem seems to be isolated to gtk applications. Here is the output from /var/log/xorg.log: http://jrm.ath.cx/misc/Xorg.0.log It seems as though the usual fonts cannot be rendered so some sort of defaults are being used. Thanks for any suggestions. Joey From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 23:12:23 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9CA0416A419 for ; Sat, 29 Dec 2007 23:12:23 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: from wa-out-1112.google.com (wa-out-1112.google.com [209.85.146.181]) by mx1.freebsd.org (Postfix) with ESMTP id 6F35913C500 for ; Sat, 29 Dec 2007 23:12:23 +0000 (UTC) (envelope-from phatbuckett@gmail.com) Received: by wa-out-1112.google.com with SMTP id k17so6867155waf.3 for ; Sat, 29 Dec 2007 15:12:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; bh=hG+BtUKf7D0z4haWVeO+gyU2kHIGF4PJ1JGvgMbrqGo=; b=Z9yK6Tsbh5gw/KSvvC0Q2RMq+KoJqBgBqb+gEW293nwEkoOgUekJefUzgudCVd6t6yFfB+16VlgOiaou7NT8Z+ikzG7jWyBR1opqPxxxGXpWogmZ2lF3n9bWbcDWVj98PZ7E8uVpxNVWUHtzvAWPZKA152tTzUpYSnUVBT77RVI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Cy6XxpuCv6sBHz5BZsvttEe3chaPlbkIVcoWuptxBmfHmBPVi4zGESCcwMgqUxAFBEzkOXbSuy1IWfa1rZHwLUngdrCR/kQkf6yU0BoF1GadY3Ip3MoxIYtbpNOKLA+9FoERTCS985scVs/rWa7QRd8cbpk4QQvgaLNWxMfcxwA= Received: by 10.114.174.2 with SMTP id w2mr10122812wae.17.1198969942702; Sat, 29 Dec 2007 15:12:22 -0800 (PST) Received: by 10.114.47.12 with HTTP; Sat, 29 Dec 2007 15:12:22 -0800 (PST) Message-ID: <839aec700712291512jc0f7d4cs1b18e556fa9d32c3@mail.gmail.com> Date: Sat, 29 Dec 2007 16:12:22 -0700 From: "Darren Spruell" To: "Andrew Falanga" In-Reply-To: <200712291541.34266.af300wsm@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200712291541.34266.af300wsm@gmail.com> Cc: FreeBSD Questions Subject: Re: Still having problems burning DVDs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 23:12:23 -0000 On Dec 29, 2007 3:41 PM, Andrew Falanga wrote: > Ok, > > Thanks to the help of earlier posts (a couple of weeks ago), using "kldload > atapicam" now allows for the scsi ioctls on my IDE CD/DVD burner. > > However, when I do the following: > > growisofs -Z /dev/cd0 -dvd-video /usr/local/dvds/whereisGod1.iso > > I get this output: > Executing 'mkisofs -dvd-video /usr/local/dvds/whereisGod1.iso | builtin_dd > of=/dev/pass0 obs=32k seek=0' > mkisofs: Value too large to be stored in data type. > File /usr/local/dvds/whereisGod1.iso is too large - ignoring > mkisofs: Unable to make a DVD-Video image. > :-( write failed: Input/output error You should use the alternate syntax which takes a pre-mastered DVD image: growisofs -dvd-compat -Z /dev/cd0=/usr/local/dvds/whereisGod1.iso Notice how above it's trying to run mkisofs to create the image. You've supposedly already got the image, so no need to master. See '18.7.3 Burning Data DVDs'. DS From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 23:36:05 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5C76316A418 for ; Sat, 29 Dec 2007 23:36:05 +0000 (UTC) (envelope-from jjuanino@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.173]) by mx1.freebsd.org (Postfix) with ESMTP id D9C8513C4D3 for ; Sat, 29 Dec 2007 23:36:04 +0000 (UTC) (envelope-from jjuanino@gmail.com) Received: by ug-out-1314.google.com with SMTP id y2so2645991uge.37 for ; Sat, 29 Dec 2007 15:36:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:received:date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-operating-system:user-agent; bh=ygLu9IuXrT25BB6Cu1kNdlycWb99Eu7K6KBihgAifgQ=; b=I+ub/eWSgYYkvhUOJyMhLUMqgMlbTe/dSUnWyZ+kEsT6CEbfIbL1yBza9lWzd+gSdIXldQVJc7YiZqgUwU0KnlGMVA81CJ+MyKujyY6oTdLGk3JX3wMv8rd0HqdgQlZH2h45cheBQ6e9s45EqVzRhUugh4oAiwvWQJcRV8ecOzA= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:subject:message-id:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:x-operating-system:user-agent; b=UnYRh47MS9tXDxcog2EZMe/aXGAxQwpVnYrn8DujMX+CySq1iP13kHbObDwb7+zd+QY7pDGStK8zAFdPS3aah51zCdJLVlKCuBKa67icvinC55UuzDo7KYcR34qu36LPpWNDy/n1o10mspmnG6kLWCzrId3NlyYDSTC7ZWzpHRg= Received: by 10.67.122.12 with SMTP id z12mr9892732ugm.18.1198971363619; Sat, 29 Dec 2007 15:36:03 -0800 (PST) Received: from gauss.sanabria.es ( [81.32.247.214]) by mx.google.com with ESMTPS id g11sm5450061gve.15.2007.12.29.15.36.01 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 29 Dec 2007 15:36:02 -0800 (PST) Received: by gauss.sanabria.es (Postfix, from userid 1001) id 2C55C32D; Sun, 30 Dec 2007 00:35:58 +0100 (CET) Date: Sun, 30 Dec 2007 00:35:58 +0100 From: Jose Garcia Juanino To: freebsd-questions@freebsd.org Message-ID: <20071229233558.GB1034@gauss.sanabria.es> Mail-Followup-To: freebsd-questions@freebsd.org References: <200712291541.34266.af300wsm@gmail.com> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="61jdw2sOBCFtR2d/" Content-Disposition: inline In-Reply-To: <200712291541.34266.af300wsm@gmail.com> X-Operating-System: FreeBSD 7.0-BETA4 User-Agent: Mutt/1.5.17 (2007-11-01) Subject: Re: Still having problems burning DVDs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 23:36:05 -0000 --61jdw2sOBCFtR2d/ Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable El s=E1bado 29 de diciembre a las 23:41:34 CET, Andrew Falanga escribi=F3: > Ok, >=20 > Thanks to the help of earlier posts (a couple of weeks ago), using > "kldload atapicam" now allows for the scsi ioctls on my IDE CD/DVD > burner. >=20 > However, when I do the following: >=20 > growisofs -Z /dev/cd0 -dvd-video /usr/local/dvds/whereisGod1.iso >=20 > I get this output: > Executing 'mkisofs -dvd-video /usr/local/dvds/whereisGod1.iso | builtin_d= d=20 > of=3D/dev/pass0 obs=3D32k seek=3D0' > mkisofs: Value too large to be stored in data type.=20 > File /usr/local/dvds/whereisGod1.iso is too large - ignoring > mkisofs: Unable to make a DVD-Video image. > :-( write failed: Input/output error >=20 >=20 > Now, what is causing this? The command I'm using is right off of the han= dbook=20 > for creating DVD video: =20 > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-dvds.h= tml >=20 > And the size of this file is: >=20 > -rw-r--r-- 1 root wheel 4317872128 Nov 21 16:30 whereisGod1.iso >=20 >=20 > That's slightly smaller than the 4.7 gb that the DVD+R says it will hold.= =20 > Please keep in mind that this iso file I've made is from doing: >=20 > cp /dev/acd0 /usr/local/dvds/whereisGod1.iso I think it should be: dd if=3D/dev/acd0 of=3D/usr/local/dvds/whereisGod1.iso bs=3D2048 Check whether the output of "file whereisGod1.iso" is "ISO 9660 CD-ROM filesystem data" or similar. Regards --61jdw2sOBCFtR2d/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (FreeBSD) iD8DBQFHdtneFOo0zaS9RnIRAsBqAKCZ9GpT7k4OlzwhbXGvs9QFcHlJdACcDp7O LqWZWFEn+BcShGLkf16b6To= =V1a2 -----END PGP SIGNATURE----- --61jdw2sOBCFtR2d/-- From owner-freebsd-questions@FreeBSD.ORG Sat Dec 29 23:49:32 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 834FF16A41A for ; Sat, 29 Dec 2007 23:49:32 +0000 (UTC) (envelope-from vdemart1@tin.it) Received: from smtp4.aruba.it (smtpd3.aruba.it [62.149.128.208]) by mx1.freebsd.org (Postfix) with SMTP id 194F313C44B for ; Sat, 29 Dec 2007 23:49:31 +0000 (UTC) (envelope-from vdemart1@tin.it) Received: (qmail 7269 invoked by uid 89); 29 Dec 2007 23:22:47 -0000 Received: by simscan 1.1.0 ppid: 7253, pid: 7264, t: 0.0616s scanners: clamav: 0.88.4/m:40/d:1722 Received: from unknown (HELO ?10.155.100.51?) (vittorio@de-martino.it@82.61.158.111) by smtp4.aruba.it with SMTP; 29 Dec 2007 23:22:47 -0000 From: vittorio To: freebsd-questions@freebsd.org Date: Sat, 29 Dec 2007 23:22:46 +0100 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200712292322.46822.vdemart1@tin.it> X-Spam-Rating: smtp4.aruba.it 1.6.2 0/1000/N Subject: Rebuilding /var/db/pkg X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Dec 2007 23:49:32 -0000 I committed a crime! While upgrading the ports under the newly installed RELENG_7 (beta4) with "portupgrade -arRk" I **deleted ** the directory /var/db/pkg. Is there any way to rebuild it from scratch? Ciao Vittorio