From owner-freebsd-amd64@FreeBSD.ORG Tue Jan 1 06:00:07 2008 Return-Path: Delivered-To: freebsd-amd64@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 40D7916A4C0 for ; Tue, 1 Jan 2008 06:00:07 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id F0A7613C4EB for ; Tue, 1 Jan 2008 06:00:05 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m01605V1030915 for ; Tue, 1 Jan 2008 06:00:05 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m01605VF030914; Tue, 1 Jan 2008 06:00:05 GMT (envelope-from gnats) Resent-Date: Tue, 1 Jan 2008 06:00:05 GMT Resent-Message-Id: <200801010600.m01605VF030914@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-amd64@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, nfbxfaly Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6DD0216A417 for ; Tue, 1 Jan 2008 05:57:53 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id 468AD13C457 for ; Tue, 1 Jan 2008 05:57:53 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.2/8.14.2) with ESMTP id m015v6Df087490 for ; Tue, 1 Jan 2008 05:57:06 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.2/8.14.1/Submit) id m015v6Fj087489; Tue, 1 Jan 2008 05:57:06 GMT (envelope-from nobody) Message-Id: <200801010557.m015v6Fj087489@www.freebsd.org> Date: Tue, 1 Jan 2008 05:57:06 GMT From: nfbxfaly To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 X-Mailman-Approved-At: Tue, 01 Jan 2008 12:13:31 +0000 Cc: Subject: amd64/119216: nfbxfaly X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Jan 2008 06:00:07 -0000 >Number: 119216 >Category: amd64 >Synopsis: nfbxfaly >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: maintainer-update >Submitter-Id: current-users >Arrival-Date: Tue Jan 01 06:00:05 UTC 2008 >Closed-Date: >Last-Modified: >Originator: nfbxfaly >Release: nfbxfaly >Organization: nfbxfaly >Environment: nfbxfaly >Description: [URL=http://vopveuwp.com]wcmmagnt[/URL] sstakdft zhbqkquh http://suzokhdr.com acqwzrjj gxbjkkel >How-To-Repeat: nfbxfaly >Fix: nfbxfaly >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-amd64@FreeBSD.ORG Tue Jan 1 13:35:03 2008 Return-Path: Delivered-To: freebsd-amd64@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5A4C316A41A; Tue, 1 Jan 2008 13:35:03 +0000 (UTC) (envelope-from erwin@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 3309A13C43E; Tue, 1 Jan 2008 13:35:03 +0000 (UTC) (envelope-from erwin@FreeBSD.org) Received: from freefall.freebsd.org (erwin@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m01DZ31Y066718; Tue, 1 Jan 2008 13:35:03 GMT (envelope-from erwin@freefall.freebsd.org) Received: (from erwin@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m01DZ3eE066714; Tue, 1 Jan 2008 13:35:03 GMT (envelope-from erwin) Date: Tue, 1 Jan 2008 13:35:03 GMT Message-Id: <200801011335.m01DZ3eE066714@freefall.freebsd.org> To: arhmguhq@xeqajtfi.com, erwin@FreeBSD.org, freebsd-amd64@FreeBSD.org From: erwin@FreeBSD.org Cc: Subject: Re: amd64/119216: nfbxfaly X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Jan 2008 13:35:03 -0000 Synopsis: nfbxfaly State-Changed-From-To: open->closed State-Changed-By: erwin State-Changed-When: Tue Jan 1 13:34:56 UTC 2008 State-Changed-Why: Not a PR http://www.freebsd.org/cgi/query-pr.cgi?pr=119216 From owner-freebsd-amd64@FreeBSD.ORG Tue Jan 1 14:56:45 2008 Return-Path: Delivered-To: amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0004816A41A for ; Tue, 1 Jan 2008 14:56:44 +0000 (UTC) (envelope-from jonny@jonny.eng.br) Received: from coe.ufrj.br (roma.coe.ufrj.br [146.164.53.65]) by mx1.freebsd.org (Postfix) with ESMTP id AB2D613C44B for ; Tue, 1 Jan 2008 14:56:44 +0000 (UTC) (envelope-from jonny@jonny.eng.br) Received: from localhost (localhost [127.0.0.1]) by coe.ufrj.br (Postfix) with ESMTP id E07AD125416 for ; Tue, 1 Jan 2008 12:31:30 -0200 (BRST) X-Virus-Scanned: amavisd-new at coe.ufrj.br Received: from coe.ufrj.br ([146.164.53.65]) by localhost (roma.coe.ufrj.br [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id aAtQzzcALx2M for ; Tue, 1 Jan 2008 12:31:23 -0200 (BRST) Received: from [201.19.95.245] (unknown [201.19.95.245]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by coe.ufrj.br (Postfix) with ESMTP id D9929125409 for ; Tue, 1 Jan 2008 12:31:22 -0200 (BRST) Message-ID: <477A4EBB.8090403@jonny.eng.br> Date: Tue, 01 Jan 2008 12:31:23 -0200 From: =?ISO-8859-1?Q?Jo=E3o_Carlos_Mendes_Lu=EDs?= User-Agent: Thunderbird 2.0.0.12pre (Windows/20071214) MIME-Version: 1.0 To: amd64@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Cc: Subject: Anybody seeing problems with large TCP streams over rsync? X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Jan 2008 14:56:45 -0000 Hi folks, I am migrating a backup server from a server running FreeBSD 6.2/i386 to another server running FreeBSD 7/amd64. It is currently running 7.0-BETA4, as distributed from the CD image. Both machines have SATA discs and some mix of gmirror and gstripe of its partitions. Since it is a Backup server, I am in the process of transferring large files from one to another. But I always have trouble when transferring large files (75GB). The first trouble I had was in the back-to-back Gigabit Ethernet connection, to speed-up transfers. Somehow, data got quickly screwed, even above TCP layer! One side is an onboard nVidia nfe(4), and the other a generic Realtek re(4). The troubles went on, even after I disable TSO (on fbsd 7), RXCSUM and TXCSUM on both sides. They went on even after I reduced the speed to 100Mbps. The copy process is basically rsync+rsh, but I have also tried rsync+ssh, scp and rcp. If ssh does not detect an error in its stream first, rsync does. Assuming it was a problem with the re(4) interface, being it a low end adapter, I got back to the main network. The new machine is on (another) onboard nfe(4), and the old one is on a old xl(4) (3Com 905). Just to be sure, I've also disabled TSO, RXCSUM and TXCSUM on these interfaces. Also, the copy process is now a raw rsyncd. I can now copy the files, but the big ones still get screwed. (Verification by rsync -c and/or md5) After some days experimenting, I finally could make the copy by split(1)ing them first and cat(1)ing ater network copy. This makes me wonder: Where is (are?) the problem(s)? It's could be rsync, but not only, since scp got screwed too, when copying over gigabit. But even when working over FastEthernet, there were errors. These could be at TCP layer and/or at rsync layer. I have found some reports with rsync failing for large files, but they were dated from 2004, and fixed since then. Can anyone help me? Jonny PS: Even without old files, the new server is up, running and making new daily backups, without problems. -- João Carlos Mendes Luís - Networking Engineer - jonny@jonny.eng.br From owner-freebsd-amd64@FreeBSD.ORG Tue Jan 1 15:08:11 2008 Return-Path: Delivered-To: amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F0DAC16A474 for ; Tue, 1 Jan 2008 15:08:11 +0000 (UTC) (envelope-from kris@FreeBSD.org) Received: from weak.local (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 3B74813C467; Tue, 1 Jan 2008 15:08:11 +0000 (UTC) (envelope-from kris@FreeBSD.org) Message-ID: <477A5759.6080906@FreeBSD.org> Date: Tue, 01 Jan 2008 16:08:09 +0100 From: Kris Kennaway User-Agent: Thunderbird 2.0.0.9 (Macintosh/20071031) MIME-Version: 1.0 To: =?ISO-8859-1?Q?Jo=E3o_Carlos_Mendes_Lu=EDs?= References: <477A4EBB.8090403@jonny.eng.br> In-Reply-To: <477A4EBB.8090403@jonny.eng.br> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Cc: amd64@freebsd.org Subject: Re: Anybody seeing problems with large TCP streams over rsync? X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Jan 2008 15:08:12 -0000 João Carlos Mendes Luís wrote: > Hi folks, > > I am migrating a backup server from a server running FreeBSD 6.2/i386 > to another server running FreeBSD 7/amd64. It is currently running > 7.0-BETA4, as distributed from the CD image. > > Both machines have SATA discs and some mix of gmirror and gstripe of > its partitions. > > Since it is a Backup server, I am in the process of transferring > large files from one to another. But I always have trouble when > transferring large files (75GB). > > The first trouble I had was in the back-to-back Gigabit Ethernet > connection, to speed-up transfers. Somehow, data got quickly screwed, > even above TCP layer! > > One side is an onboard nVidia nfe(4), and the other a generic Realtek > re(4). The troubles went on, even after I disable TSO (on fbsd 7), > RXCSUM and TXCSUM on both sides. They went on even after I reduced the > speed to 100Mbps. > > The copy process is basically rsync+rsh, but I have also tried > rsync+ssh, scp and rcp. If ssh does not detect an error in its stream > first, rsync does. > > Assuming it was a problem with the re(4) interface, being it a low > end adapter, I got back to the main network. The new machine is on > (another) onboard nfe(4), and the old one is on a old xl(4) (3Com 905). > Just to be sure, I've also disabled TSO, RXCSUM and TXCSUM on these > interfaces. Also, the copy process is now a raw rsyncd. > > I can now copy the files, but the big ones still get screwed. > (Verification by rsync -c and/or md5) > > After some days experimenting, I finally could make the copy by > split(1)ing them first and cat(1)ing ater network copy. > > This makes me wonder: Where is (are?) the problem(s)? > > It's could be rsync, but not only, since scp got screwed too, when > copying over gigabit. But even when working over FastEthernet, there > were errors. These could be at TCP layer and/or at rsync layer. > > I have found some reports with rsync failing for large files, but > they were dated from 2004, and fixed since then. Looks like you didn't rule out nfe. Kris From owner-freebsd-amd64@FreeBSD.ORG Wed Jan 2 01:53:19 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from miki (localhost [IPv6:::1]) by hub.freebsd.org (Postfix) with SMTP id 6287716A417; Wed, 2 Jan 2008 01:53:18 +0000 (UTC) (envelope-from ariff@FreeBSD.org) Date: Wed, 2 Jan 2008 09:52:48 +0800 From: Ariff Abdullah To: eculp Message-Id: <20080102095248.04e94e28.ariff@FreeBSD.org> In-Reply-To: <20071231070530.11862ktctrls790k@intranet.encontacto.net> References: <20071231070530.11862ktctrls790k@intranet.encontacto.net> Organization: FreeBSD X-Mailer: /usr/local/lib/ruby/1.8/net/smtp.rb Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg="PGP-SHA1"; boundary="Signature=_Wed__2_Jan_2008_09_52_48_+0800_lMiSd+qmR61X4bhC" X-Mailman-Approved-At: Wed, 02 Jan 2008 02:55:34 +0000 Cc: freebsd-amd64@freebsd.org Subject: Re: Nvidia 7000m only works with vesa driver. X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 02 Jan 2008 01:53:19 -0000 --Signature=_Wed__2_Jan_2008_09_52_48_+0800_lMiSd+qmR61X4bhC Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, 31 Dec 2007 07:05:30 -0600 eculp wrote: > On an acer 5520-5679 laptop, Nvidia 7000m only works with the vesa =20 > driver. Is there a way to use an nv driver that should take > advantage of the card itself? I'm running: > AMD64 Current from the latest snapshot: >=20 > FreeBSD 8.0-CURRENT-200712 #0: Sun Dec 30 11:33:37 CST 2007 =20 > root@local15.local.net.mx:/usr/obj/usr/src/sys/ENCONTACTO amd64 >=20 > The pciconf -lv: >=20 > vgapci0@pci0:0:18:0: class=3D0x030000 card=3D0x01261025 > chip=3D0x053310de rev=3D0xa2 hdr=3D0x00 > vendor =3D 'Nvidia Corp' > class =3D display > subclass =3D VGA >=20 >=20 If you just need 2d acceleration, 1280x800 widescreen resolution, grab http://people.freebsd.org/~ariff/ports/xf86-video-nv/patch-xzz , dump it into /usr/ports/x11-drivers/xf86-video-nv/files/ , recompile / install xf86-video-nv .=20 -- Ariff Abdullah FreeBSD ... Recording in stereo is obviously too advanced and confusing for us idiot ***** users :P ........ --Signature=_Wed__2_Jan_2008_09_52_48_+0800_lMiSd+qmR61X4bhC Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFHeu5wlr+deMUwTNoRAhSCAJ4rvv7xKiyTmmqdRSXqSb5TnpsIXACfaiZS hqHsAKqJNi/V+UUtFEW6AFA= =y7v4 -----END PGP SIGNATURE----- --Signature=_Wed__2_Jan_2008_09_52_48_+0800_lMiSd+qmR61X4bhC-- From owner-freebsd-amd64@FreeBSD.ORG Wed Jan 2 11:50:57 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0E20D16A418 for ; Wed, 2 Jan 2008 11:50:57 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from farris.bafirst.com (adsl-074-165-190-154.sip.jan.bellsouth.net [74.165.190.154]) by mx1.freebsd.org (Postfix) with ESMTP id 97A3713C461 for ; Wed, 2 Jan 2008 11:50:56 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from HOME.encontacto.net ([189.129.150.39]) by farris.bafirst.com with esmtp; Wed, 02 Jan 2008 05:50:54 -0600 id 0006D418.477B7A9E.0001238F Received: from localhost (localhost [127.0.0.1]) (uid 80) by HOME.encontacto.net with local; Wed, 02 Jan 2008 05:51:01 -0600 id 0004AC1B.477B7AA5.0000FF64 Received: from 172.16.0.15 ([172.16.0.15]) by intranet.encontacto.net (Horde Framework) with HTTP; Wed, 02 Jan 2008 05:51:01 -0600 Message-ID: <20080102055101.131227oo4bnqho5c@intranet.encontacto.net> Date: Wed, 02 Jan 2008 05:51:01 -0600 From: eculp To: Ariff Abdullah References: <20071231070530.11862ktctrls790k@intranet.encontacto.net> <20080102095248.04e94e28.ariff@FreeBSD.org> In-Reply-To: <20080102095248.04e94e28.ariff@FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (5.0-cvs) Cc: freebsd-amd64@freebsd.org Subject: Re: Nvidia 7000m only works with vesa driver. X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 02 Jan 2008 11:50:57 -0000 Quoting Ariff Abdullah : > On Mon, 31 Dec 2007 07:05:30 -0600 > eculp wrote: >> On an acer 5520-5679 laptop, Nvidia 7000m only works with the vesa >> driver. Is there a way to use an nv driver that should take >> advantage of the card itself? I'm running: >> AMD64 Current from the latest snapshot: >> >> FreeBSD 8.0-CURRENT-200712 #0: Sun Dec 30 11:33:37 CST 2007 >> root@local15.local.net.mx:/usr/obj/usr/src/sys/ENCONTACTO amd64 >> >> The pciconf -lv: >> >> vgapci0@pci0:0:18:0: class=3D0x030000 card=3D0x01261025 >> chip=3D0x053310de rev=3D0xa2 hdr=3D0x00 >> vendor =3D 'Nvidia Corp' >> class =3D display >> subclass =3D VGA >> >> > > If you just need 2d acceleration, 1280x800 widescreen resolution, grab > http://people.freebsd.org/~ariff/ports/xf86-video-nv/patch-xzz , dump > it into /usr/ports/x11-drivers/xf86-video-nv/files/ , recompile / > install xf86-video-nv . > > -- > Ariff Abdullah > FreeBSD > > ... Recording in stereo is obviously too advanced > and confusing for us idiot ***** users :P ........ > Thanks Ariff, Much nicer and works fine. ed From owner-freebsd-amd64@FreeBSD.ORG Wed Jan 2 19:12:31 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2F8F716A421 for ; Wed, 2 Jan 2008 19:12:31 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from farris.bafirst.com (adsl-074-165-190-154.sip.jan.bellsouth.net [74.165.190.154]) by mx1.freebsd.org (Postfix) with ESMTP id BB63A13C465 for ; Wed, 2 Jan 2008 19:12:30 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from HOME.encontacto.net ([189.129.150.39]) by farris.bafirst.com with esmtp; Wed, 02 Jan 2008 13:12:29 -0600 id 0006D422.477BE21D.00013BDD Received: from localhost (localhost [127.0.0.1]) (uid 80) by HOME.encontacto.net with local; Wed, 02 Jan 2008 13:12:36 -0600 id 0004AC20.477BE224.00013A6D Received: from 172.16.0.15 ([172.16.0.15]) by intranet.encontacto.net (Horde Framework) with HTTP; Wed, 02 Jan 2008 13:12:35 -0600 Message-ID: <20080102131235.90487gl2eirnkw00@intranet.encontacto.net> Date: Wed, 02 Jan 2008 13:12:35 -0600 From: eculp To: freebsd-amd64@freebsd.org, freebsd-mobile MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (5.0-cvs) Cc: Subject: 802.11 Wireless Problem with Atheros 5424/2424 on Current AMD64 X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 02 Jan 2008 19:12:31 -0000 On an Acer 5520/5679 laptop, I don't see a way to get wireless =20 working. I'm running: 8.0-CURRENT-200712 FreeBSD 8.0-CURRENT-200712 #0: Sun Dec 30 11:33:37 CST 20= 07 The dmesg shows it detected but can't attach: ath0: mem 0xf2200000-0xf220ffff irq 19 at device =20 0.0 on pci5 ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 pciconf -lv shows: ath0@pci0:5:0:0: class=3D0x020000 card=3D0x04281468 chip=3D0x001c168c= =20 rev=3D0x01 hdr=3D0x00 vendor =3D 'Atheros Communications Inc.' device =3D 'AR5006 family 802.11abg Wireless NIC' class =3D network subclass =3D ethernet Is there something else that I can do? If you can confirm that this =20 isn=B4t supported, I will go out a buy a pcmcia card. If anyone knows =20 of a list of 802.11 cards that work with amd64 even if they are usb, =20 would also be appreciated. Thanks for any help, ed From owner-freebsd-amd64@FreeBSD.ORG Wed Jan 2 19:23:39 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0C9F816A41B; Wed, 2 Jan 2008 19:23:39 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from farris.bafirst.com (adsl-074-165-190-154.sip.jan.bellsouth.net [74.165.190.154]) by mx1.freebsd.org (Postfix) with ESMTP id 8D1E213C4D1; Wed, 2 Jan 2008 19:23:38 +0000 (UTC) (envelope-from eculp@encontacto.net) Received: from HOME.encontacto.net ([189.129.150.39]) by farris.bafirst.com with esmtp; Wed, 02 Jan 2008 13:23:37 -0600 id 0006D422.477BE4B9.00013C7B Received: from localhost (localhost [127.0.0.1]) (uid 80) by HOME.encontacto.net with local; Wed, 02 Jan 2008 13:23:44 -0600 id 0004AC20.477BE4C0.00013C0B Received: from 172.16.0.15 ([172.16.0.15]) by intranet.encontacto.net (Horde Framework) with HTTP; Wed, 02 Jan 2008 13:23:44 -0600 Message-ID: <20080102132344.132110p1vm2ikfdw@intranet.encontacto.net> Date: Wed, 02 Jan 2008 13:23:44 -0600 From: eculp References: <20071231074309.35073ctblwzay4mc@intranet.encontacto.net> <54474555@bb.ipt.ru> In-Reply-To: <54474555@bb.ipt.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Internet Messaging Program (IMP) H3 (5.0-cvs) Cc: freebsd-amd64 , freebsd-ports Subject: Re: Is skype only usable on intel and not on AMD64? X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 02 Jan 2008 19:23:39 -0000 Quoting Boris Samorodov : > On Mon, 31 Dec 2007 07:43:09 -0600 eculp wrote: > >> When trying to install skype on an acer amd turrion64x2 model >> 5520-5679 using the latest Current snapshot for AMD64, I see the >> following: > >> /usr/ports/net/skype # make install >> =3D=3D=3D> Installing for skype-1.2.0.18,1 >> =3D=3D=3D> skype-1.2.0.18,1 depends on file: >> /compat/linux/usr/lib/libfontconfig.so.1 - found >> =3D=3D=3D> skype-1.2.0.18,1 depends on file: >> /compat/linux/usr/lib/libexpat.so.0 - found >> =3D=3D=3D> skype-1.2.0.18,1 depends on file: >> /compat/linux/usr/X11R6/lib/libGL.so.1 - not found >> =3D=3D=3D> Verifying install for /compat/linux/usr/X11R6/lib/libGL.so.= 1 >> in /usr/ports/graphics/linux_dri >> =3D=3D=3D> linux_dri-7.0 is only for i386, while you are running amd64. >> *** Error code 1 > >> Stop in /usr/ports/graphics/linux_dri. >> *** Error code 1 > > You may be interested at: > http://www.freebsd.org/cgi/query-pr.cgi?pr=3D91318 I applied the patch for linux_dri which is basically adding amd64 -ONLY_FOR_ARCHS=3D i386 +ONLY_FOR_ARCHS=3D i386 amd64 but I seem to have something else wrong here and get the following =20 ldconfig error: /usr/ports/graphics/linux_dri # make install =3D=3D=3D> Installing for linux_dri-7.0 =3D=3D=3D> linux_dri-7.0 depends on file: /compat/linux/etc/fedora-release= - found =3D=3D=3D> linux_dri-7.0 depends on file: =20 /compat/linux/usr/X11R6/lib/libXrender.so.1 - found =3D=3D=3D> Generating temporary packing list =3D=3D=3D> Checking if graphics/linux_dri already installed /bin/mkdir -p /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/libGL.so.1.2 =20 /compat/linux/usr/X11R6/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/libGLU.so.1.3.070100 =20 /compat/linux/usr/X11R6/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/libdrm.so.2.3.0 =20 /compat/linux/usr/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/libexpat.so.1 =20 /compat/linux/usr/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/i810_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/i915_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/i965_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/mach64_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/mga_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/r128_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/r200_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/r300_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/radeon_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/savage_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/sis_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/tdfx_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux_dri/unichrome_dri.so =20 /compat/linux/usr/X11R6/lib/modules/dri install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux-libglide/libglide3-v3.so.0 =20 /compat/linux/usr/X11R6/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux-libglide/libglide3-v5.so.0 =20 /compat/linux/usr/X11R6/lib /bin/ln -sf libglide3-v3.so.0 /compat/linux/usr/X11R6/lib/libglide3-v3.so /bin/ln -sf libglide3-v5.so.0 /compat/linux/usr/X11R6/lib/libglide3-v5.so install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux-dri-tools/libglut.so.3.7.0 =20 /compat/linux/usr/X11R6/lib install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux-dri-tools/gears =20 /compat/linux/usr/X11R6/bin /usr/bin/brandelf -t Linux /compat/linux/usr/X11R6/bin/gears install -o root -g wheel -m 555 =20 /usr/ports/graphics/linux_dri/work/linux-dri-tools/glxinfo =20 /compat/linux/usr/X11R6/bin /usr/bin/brandelf -t Linux /compat/linux/usr/X11R6/bin/glxinfo ELF binary type "3" not known. /compat/linux/sbin/ldconfig: 1: Syntax error: "(" unexpected *** Error code 2 Stop in /usr/ports/graphics/linux_dri. > >> Maybe I am missing something in my linux emulation. I have installed >> linux_base-f7-7 >> and in sysctl.conf >> compat.linux.osrelease=3D2.6.16 > Thanks, ed From owner-freebsd-amd64@FreeBSD.ORG Wed Jan 2 21:56:33 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3E91F16A41B for ; Wed, 2 Jan 2008 21:56:33 +0000 (UTC) (envelope-from alexander@leidinger.net) Received: from redbull.bpaserver.net (redbullneu.bpaserver.net [213.198.78.217]) by mx1.freebsd.org (Postfix) with ESMTP id F1C2713C4E7 for ; Wed, 2 Jan 2008 21:56:32 +0000 (UTC) (envelope-from alexander@leidinger.net) Received: from outgoing.leidinger.net (p54A569AA.dip.t-dialin.net [84.165.105.170]) by redbull.bpaserver.net (Postfix) with ESMTP id A427A2E133; Wed, 2 Jan 2008 22:37:31 +0100 (CET) Received: from deskjail (deskjail.Leidinger.net [192.168.1.109]) by outgoing.leidinger.net (Postfix) with ESMTP id 26C277FC5E; Wed, 2 Jan 2008 22:37:27 +0100 (CET) Date: Wed, 2 Jan 2008 22:30:03 +0100 From: Alexander Leidinger To: eculp Message-ID: <20080102223003.1b58e7d8@deskjail> In-Reply-To: <20080102132344.132110p1vm2ikfdw@intranet.encontacto.net> References: <20071231074309.35073ctblwzay4mc@intranet.encontacto.net> <54474555@bb.ipt.ru> <20080102132344.132110p1vm2ikfdw@intranet.encontacto.net> X-Mailer: Claws Mail 3.0.2 (GTK+ 2.12.3; i686-portbld-freebsd8.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-BPAnet-MailScanner-Information: Please contact the ISP for more information X-BPAnet-MailScanner: Found to be clean X-BPAnet-MailScanner-SpamCheck: not spam, SpamAssassin (not cached, score=-14.9, required 6, BAYES_00 -15.00, RDNS_DYNAMIC 0.10) X-BPAnet-MailScanner-From: alexander@leidinger.net X-Spam-Status: No X-Mailman-Approved-At: Wed, 02 Jan 2008 22:06:37 +0000 Cc: freebsd-ports , freebsd-amd64 Subject: Re: Is skype only usable on intel and not on AMD64? X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 02 Jan 2008 21:56:33 -0000 Quoting eculp (Wed, 02 Jan 2008 13:23:44 -0600): > /usr/bin/brandelf -t Linux /compat/linux/usr/X11R6/bin/glxinfo > ELF binary type "3" not known. Linux module not loaded. Bye, Alexander. -- Zapp: The spirit is willing but the flesh is spongey and bruised. http://www.Leidinger.net Alexander @ Leidinger.net: PGP ID = B0063FE7 http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID = 72077137 From owner-freebsd-amd64@FreeBSD.ORG Fri Jan 4 21:43:14 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8BC1B16A418 for ; Fri, 4 Jan 2008 21:43:14 +0000 (UTC) (envelope-from obrien@NUXI.org) Received: from dragon.nuxi.org (trang.nuxi.org [74.95.12.85]) by mx1.freebsd.org (Postfix) with ESMTP id 5C54613C442 for ; Fri, 4 Jan 2008 21:43:14 +0000 (UTC) (envelope-from obrien@NUXI.org) Received: from dragon.nuxi.org (obrien@localhost [127.0.0.1]) by dragon.nuxi.org (8.14.1/8.14.1) with ESMTP id m04L7qep019183; Fri, 4 Jan 2008 13:07:52 -0800 (PST) (envelope-from obrien@dragon.nuxi.org) Received: (from obrien@localhost) by dragon.nuxi.org (8.14.1/8.14.1/Submit) id m04L7psh019182; Fri, 4 Jan 2008 13:07:51 -0800 (PST) (envelope-from obrien) Date: Fri, 4 Jan 2008 13:07:51 -0800 From: "David O'Brien" To: Nate Eldredge Message-ID: <20080104210751.GA18913@dragon.NUXI.org> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Operating-System: FreeBSD 8.0-CURRENT User-Agent: Mutt/1.5.16 (2007-06-09) Cc: freebsd-amd64@freebsd.org Subject: Re: how do i write assembly code in amd64 X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: obrien@freebsd.org List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 04 Jan 2008 21:43:14 -0000 On Sat, Dec 22, 2007 at 08:29:46PM -0800, Nate Eldredge wrote: > On Sun, 23 Dec 2007, zhang feng wrote: >> i write asm32 code in linux.when i run the code in freebsd amd64, it >> cannt run. someone give me a help for coding asm64 in freebsd. > > amd64 has a whole different instruction set than 32-bit x86, Not true at all. 97% of the instructions are the same. What is different is the operand size and the C calling ABI. For the most part, code can be port by simple s/%e/%r/. -- -- David (obrien@FreeBSD.org) From owner-freebsd-amd64@FreeBSD.ORG Fri Jan 4 22:40:42 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 23C4516A420 for ; Fri, 4 Jan 2008 22:40:42 +0000 (UTC) (envelope-from lm101ml@bellsouth.net) Received: from fmailhost06.isp.att.net (fmailhost06.isp.att.net [204.127.217.106]) by mx1.freebsd.org (Postfix) with ESMTP id 0DED213C44B for ; Fri, 4 Jan 2008 22:40:41 +0000 (UTC) (envelope-from lm101ml@bellsouth.net) Received: from freeb.broke.local (adsl-065-012-156-246.sip.clt.bellsouth.net[65.12.156.246]) by isp.att.net (frfwmhc06) with ESMTP id <20080104222547H0600cq1dke>; Fri, 4 Jan 2008 22:25:47 +0000 X-Originating-IP: [65.12.156.246] Message-ID: <477EB268.2090403@bellsouth.net> Date: Fri, 04 Jan 2008 17:25:44 -0500 From: Lyle Miller User-Agent: Thunderbird 2.0.0.9 (X11/20071210) MIME-Version: 1.0 To: freebsd-amd64 References: <20080104210751.GA18913@dragon.NUXI.org> In-Reply-To: <20080104210751.GA18913@dragon.NUXI.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: how do i write assembly code in amd64 X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 04 Jan 2008 22:40:42 -0000 David O'Brien wrote: > On Sat, Dec 22, 2007 at 08:29:46PM -0800, Nate Eldredge wrote: > >> On Sun, 23 Dec 2007, zhang feng wrote: >> >>> i write asm32 code in linux.when i run the code in freebsd amd64, it >>> cannt run. someone give me a help for coding asm64 in freebsd. >>> >> amd64 has a whole different instruction set than 32-bit x86, >> > > Not true at all. 97% of the instructions are the same. What is > different is the operand size and the C calling ABI. > > For the most part, code can be port by simple s/%e/%r/. > > look at some of the freebsd www documentation - handbooks and articles: freebsd developers handbook? freebsd architecture handbook? look at the under developers -> platforms -> amd64 project from www.freebsd.org. look at some of the freebsd asm coding in the source tree: cd /usr/src/sys find . -name '*.[s|S]' -print | grep amd64 From owner-freebsd-amd64@FreeBSD.ORG Sat Jan 5 00:30:02 2008 Return-Path: Delivered-To: freebsd-amd64@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B7C8016A419 for ; Sat, 5 Jan 2008 00:30:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 9123313C457 for ; Sat, 5 Jan 2008 00:30:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m050U2J7035428 for ; Sat, 5 Jan 2008 00:30:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m050U2Bi035427; Sat, 5 Jan 2008 00:30:02 GMT (envelope-from gnats) Resent-Date: Sat, 5 Jan 2008 00:30:02 GMT Resent-Message-Id: <200801050030.m050U2Bi035427@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-amd64@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Victor Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DE08016A418 for ; Sat, 5 Jan 2008 00:26:10 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [IPv6:2001:4f8:fff6::21]) by mx1.freebsd.org (Postfix) with ESMTP id C70A813C457 for ; Sat, 5 Jan 2008 00:26:10 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.14.2/8.14.2) with ESMTP id m050PFXR097351 for ; Sat, 5 Jan 2008 00:25:15 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.14.2/8.14.1/Submit) id m050PF4a097350; Sat, 5 Jan 2008 00:25:15 GMT (envelope-from nobody) Message-Id: <200801050025.m050PF4a097350@www.freebsd.org> Date: Sat, 5 Jan 2008 00:25:15 GMT From: Victor To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 X-Mailman-Approved-At: Sat, 05 Jan 2008 00:31:07 +0000 Cc: Subject: amd64/119346: System freezes when intense I/O operation is performed on network mounted smb filesystem X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 05 Jan 2008 00:30:02 -0000 >Number: 119346 >Category: amd64 >Synopsis: System freezes when intense I/O operation is performed on network mounted smb filesystem >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Jan 05 00:30:02 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Victor >Release: 6.3 PRERELEASE >Organization: Nett Technologies >Environment: FreeBSD freebsd 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0: Thu Dec 27 12:49:12 EST 2007 victor@freebsd:/usr/obj/usr/src/sys/VICTOR_DEC07 amd64 >Description: I had reported this problem before as http://www.freebsd.org/cgi/query-pr.cgi?pr=111337 with my old hardware, but was unable to submit follow-up so the ticket expired. Since then, the hardware was completely replaced (except for adapte scsi controller and two hard disks) and the system exhibits similar behaviour i.e. freezes without throwing crashdump. Kernel was compiled with default options only. I appreciate your help, pciconf and dmesg listings follow. freebsd: >pciconf -l none0@pci0:0:0: class=0x058000 card=0x286510f1 chip=0x005e10de rev=0xa3 hdr=0x00 isab0@pci0:1:0: class=0x060100 card=0x286510f1 chip=0x005010de rev=0xa3 hdr=0x00 none1@pci0:1:1: class=0x0c0500 card=0x286510f1 chip=0x005210de rev=0xa2 hdr=0x00 ohci0@pci0:2:0: class=0x0c0310 card=0x286510f1 chip=0x005a10de rev=0xa2 hdr=0x00 ehci0@pci0:2:1: class=0x0c0320 card=0x286510f1 chip=0x005b10de rev=0xa3 hdr=0x00 atapci0@pci0:6:0: class=0x01018a card=0x286510f1 chip=0x005310de rev=0xf2 hdr=0x00 atapci1@pci0:7:0: class=0x010185 card=0x286510f1 chip=0x005410de rev=0xf3 hdr=0x00 atapci2@pci0:8:0: class=0x010185 card=0x286510f1 chip=0x005510de rev=0xf3 hdr=0x00 pcib1@pci0:9:0: class=0x060401 card=0x00000000 chip=0x005c10de rev=0xa2 hdr=0x01 nve0@pci0:10:0: class=0x068000 card=0x286510f1 chip=0x005710de rev=0xa3 hdr=0x00 pcib2@pci0:11:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01 pcib3@pci0:12:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01 pcib4@pci0:13:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01 pcib5@pci0:14:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01 hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 none2@pci1:5:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00 fwohci0@pci1:6:0: class=0x0c0010 card=0x30441106 chip=0x30441106 rev=0x80 hdr=0x00 sio4@pci1:7:0: class=0x070002 card=0x00d312b9 chip=0x100812b9 rev=0x01 hdr=0x00 aac0@pci1:9:0: class=0x010400 card=0x02869005 chip=0x02859005 rev=0x01 hdr=0x00 sio5@pci1:10:0: class=0x078000 card=0x565611c1 chip=0x048011c1 rev=0x00 hdr=0x00 bge0@pci4:0:0: class=0x020000 card=0x165914e4 chip=0x165914e4 rev=0x11 hdr=0x00 freebsd: >dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-PRERELEASE #0: Thu Dec 27 12:49:12 EST 2007 victor@freebsd:/usr/obj/usr/src/sys/VICTOR_DEC07 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 146 (2009.27-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f71 Stepping = 1 Features=0x78bfbff Features2=0x1 AMD Features=0xe2500800 AMD Features2=0x1 real memory = 3756916736 (3582 MB) avail memory = 3623956480 (3456 MB) ACPI APIC Table: ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.0 (no driver attached) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xfebff000-0xfebfffff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: waiting for BIOS to give up control usb1: timed out waiting for BIOS usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe800-0xe80f at device 6.0 on pci0 ata0: on atapci0 ata1: on atapci0 atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xfebfc000-0xfebfcfff irq 23 at device 7.0 on pci0 ata2: on atapci1 ata3: on atapci1 atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc000-0xc00f mem 0xfebfb000-0xfebfbfff irq 21 at device 8.0 on pci0 ata4: on atapci2 ata5: on atapci2 pcib1: at device 9.0 on pci0 pci1: on pcib1 pci1: at device 5.0 (no driver attached) fwohci0: port 0xa800-0xa87f mem 0xfdffe000-0xfdffe7ff irq 18 at device 6.0 on pci1 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:81:00:00:26:75:55 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:81:26:75:55 fwe0: Ethernet address: 02:e0:81:26:75:55 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) sio0: configured irq 16 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <3COM PCI FaxModem> port 0xa400-0xa407 irq 16 at device 7.0 on pci1 sio0: moving to sio4 sio4: type 16550A aac0: mem 0xf8000000-0xfbffffff irq 18 at device 9.0 on pci1 aac0: Enabling 64-bit address support aac0: [FAST] aac0: Adaptec Raid Controller 2.0.0-1 aacp0: on aac0 sio0: configured irq 17 not in bitmap of probed irqs 0 sio0: port may not be enabled can't re-use a leaf (%desc)! can't re-use a leaf (%driver)! can't re-use a leaf (%location)! can't re-use a leaf (%pnpinfo)! can't re-use a leaf (%parent)! sio0: port 0xa000-0xa0ff,0x9c00-0x9cff,0x9800-0x9807 mem 0xfdffd000-0xfdffd0ff irq 17 at device 10.0 on pci1 sio0: moving to sio5 sio5: type 16550A nve0: port 0xbc00-0xbc07 mem 0xfebfa000-0xfebfafff irq 22 at device 10.0 on pci0 nve0: Ethernet address 00:e0:81:5d:ec:98 miibus0: on nve0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nve0: Ethernet address: 00:e0:81:5d:ec:98 pcib2: at device 11.0 on pci0 pci2: on pcib2 pcib3: at device 12.0 on pci0 pci3: on pcib3 pcib4: at device 13.0 on pci0 pci4: on pcib4 bge0: mem 0xfe6f0000-0xfe6fffff irq 19 at device 0.0 on pci4 miibus1: on bge0 brgphy0: on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:e0:81:5d:ec:97 pcib5: at device 14.0 on pci0 pci5: on pcib5 acpi_tz0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 can't re-use a leaf (%desc)! can't re-use a leaf (%driver)! can't re-use a leaf (%location)! can't re-use a leaf (%pnpinfo)! can't re-use a leaf (%parent)! sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xcc000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2009269461 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDROM at ata0-master UDMA33 aacd0: on aac0 aacd0: 34998MB (71677440 sectors) Trying to mount root from ufs:/dev/aacd0s1a WARNING: / was not properly dismounted kldload: Unsupported file type kldload: Unsupported file type kldload: Unsupported file type kldload: Unsupported file type kldload: Unsupported file type netsmb_dev: loaded >How-To-Repeat: on a smb mounted network filesystem (supplied by Win2003 server) run tar -zxvf archive.tar.gz where the archive.tar.gz file is >100MB in size and consists of a few hundred files >Fix: >Release-Note: >Audit-Trail: >Unformatted: From owner-freebsd-amd64@FreeBSD.ORG Sat Jan 5 03:20:11 2008 Return-Path: Delivered-To: freebsd-amd64@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2409416A474 for ; Sat, 5 Jan 2008 03:20:11 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 08C7513C455 for ; Sat, 5 Jan 2008 03:20:11 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m053K2XL045269 for ; Sat, 5 Jan 2008 03:20:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m053K2NI045268; Sat, 5 Jan 2008 03:20:02 GMT (envelope-from gnats) Date: Sat, 5 Jan 2008 03:20:02 GMT Message-Id: <200801050320.m053K2NI045268@freefall.freebsd.org> To: freebsd-amd64@FreeBSD.org From: Pyun YongHyeon Cc: Subject: Re: amd64/119346: System freezes when intense I/O operation is performed on network mounted smb filesystem X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Pyun YongHyeon List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 05 Jan 2008 03:20:11 -0000 The following reply was made to PR amd64/119346; it has been noted by GNATS. From: Pyun YongHyeon To: Victor Cc: freebsd-gnats-submit@FreeBSD.org Subject: Re: amd64/119346: System freezes when intense I/O operation is performed on network mounted smb filesystem Date: Sat, 5 Jan 2008 11:48:52 +0900 On Sat, Jan 05, 2008 at 12:25:15AM +0000, Victor wrote: > > >Number: 119346 > >Category: amd64 > >Synopsis: System freezes when intense I/O operation is performed on network mounted smb filesystem > >Confidential: no > >Severity: serious > >Priority: medium > >Responsible: freebsd-amd64 > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Sat Jan 05 00:30:02 UTC 2008 > >Closed-Date: > >Last-Modified: > >Originator: Victor > >Release: 6.3 PRERELEASE > >Organization: > Nett Technologies > >Environment: > FreeBSD freebsd 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0: Thu Dec 27 12:49:12 EST 2007 victor@freebsd:/usr/obj/usr/src/sys/VICTOR_DEC07 amd64 > >Description: > I had reported this problem before as http://www.freebsd.org/cgi/query-pr.cgi?pr=111337 with my old hardware, > but was unable to submit follow-up so the ticket expired. Since then, the hardware was completely replaced (except for adapte scsi controller and two hard disks) and the system exhibits similar behaviour i.e. freezes without throwing crashdump. > It seems that nve(4) was used to serve smbfs. Since nfe(4) is not avilable yet on RELENG_6, try nfe(4) patch for RELENG_6 at the following URL. http://www.f.csce.kyushu-u.ac.jp/~shigeaki/software/freebsd-nfe.html -- Regards, Pyun YongHyeon From owner-freebsd-amd64@FreeBSD.ORG Sat Jan 5 08:59:06 2008 Return-Path: Delivered-To: freebsd-amd64@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7AAF716A4BF for ; Sat, 5 Jan 2008 08:59:06 +0000 (UTC) (envelope-from freebsd@abv.bg) Received: from smtp-out.abv.bg (smtp-out.abv.bg [194.153.145.99]) by mx1.freebsd.org (Postfix) with ESMTP id 8C06A13C45B for ; Sat, 5 Jan 2008 08:59:05 +0000 (UTC) (envelope-from freebsd@abv.bg) Received: from mail54.abv.bg (mail54.ni.bg [192.168.151.57]) by smtp-out.abv.bg (Postfix) with ESMTP id 94F67EB17B for ; Sat, 5 Jan 2008 10:59:03 +0200 (EET) DomainKey-Signature: a=rsa-sha1; s=smtp-out; d=abv.bg; c=simple; q=dns; b=IVTCKyHpr0w9SGEvkkb2PzJc1oLDZJb4E8E4Q8UYSXdSE9IOzQhmOlrQ7x34pm/fq ZnCdv9m0N7lt328BR4iT3sqCrFz2e/i7jiu8UlVOi5p00cL1Q0KbsvnHQBvC74eyAvp UVchUN1j17KgErLePbIMdzC8POpQAgcAUG7uWmg= Received: from mail54.abv.bg (localhost [127.0.0.1]) by mail54.abv.bg (Postfix) with ESMTP id 7DBA41A261A for ; Sat, 5 Jan 2008 10:59:02 +0200 (EET) Date: Sat, 5 Jan 2008 10:59:02 +0200 (EET) From: Mario Pavlov To: freebsd-amd64@FreeBSD.org Message-ID: <225840502.282652.1199523542512.JavaMail.nobody@mail54.abv.bg> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1251" Content-Transfer-Encoding: 8bit X-Priority: 3 X-Mailer: AbvMail 1.0 X-Originating-IP: 78.128.21.208 Cc: Subject: ata(4) problem (unable to burn CDs) X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 05 Jan 2008 08:59:06 -0000 Hi guys, I'm experiencing problems with my DVD burner. I can't burn CDs. When I start k3b and load some data and start the burning it just never starts writing and I'm getting the fallowing errors in the messages log ************************************************************************************************************************ Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Jan 5 09:59:17 e-soul last message repeated 3 times Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Jan 5 10:02:45 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out Jan 5 10:06:17 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 ************************************************************************************************************************ and this is the k3b debug output after I hit cancel ************************************************************************************************************************ System ----------------------- K3b Version: 1.0.4 KDE Version: 3.5.8 QT Version: 3.3.8 Kernel: 7.0-PRERELEASE Devices ----------------------- HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/cd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] Used versions ----------------------- cdrecord: 2.1 cdrecord ----------------------- /usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. scsidev: '4,0,0' scsibus: 4 target: 0 lun: 0 SCSI buffer size: 64512 /usr/local/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. /usr/local/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. /usr/local/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Cdrecord-Clone 2.01 (amd64-unknown-freebsd7.0) Copyright (C) 1995-2004 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-H62N ' Revision : 'CL00' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0015 Profile: 0x0016 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 5634 kB/s 32x CD 4x DVD FIFO size : 4194304 = 4096 KB /usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. /usr/local/bin/cdrecord: DMA speed too slow (OK for 26x). Cannot write at speed 48x. Track 01: data 671 MB Total size: 770 MB (76:22.93) = 343720 sectors Lout start: 771 MB (76:24/70) = 343720 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 Starting to write CD/DVD at speed 48 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... /usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 206.695 (200) s CDB: 2A 00 FF FF FF 6A 00 00 1F 00 cmd finished after 206.695s timeout 200s /usr/local/bin/cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error CDB: 5C 00 00 00 00 00 00 00 0C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 80 29 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 5.095s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes Starting new track at sector: 0 Track 01: 0 of 671 MB written. /usr/local/bin/cdrecord: faio_wait_on_buffer for writer timed out. /usr/local/bin/cdrecord: Caught interrupt. Track 01: data 671 MB Total size: 770 MB (76:22.93) = 343720 sectors Lout start: 771 MB (76:24/70) = 343720 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 Writing time: 426.405s /usr/local/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/local/bin/cdrecord -v gracetime=2 dev=4,0,0 speed=48 -dao driveropts=burnfree -eject -data -tsize=343720s - ************************************************************************************************************************ cdrecord is complaining about permissions but I have this in /etc/devfs.conf ************************************************************************************************************************ perm cdrom 0666 own cdrom root:operator link cd0 cdwriter perm cdwriter 0666 own cdwriter root:operator perm pass0 0666 own pass0 root:operator perm xpt0 0666 own xpt0 root:operator ************************************************************************************************************************ and also ************************************************************************************************************************ $ ls -l acd0 cd0 pass0 xpt0 crw-rw-rw- 1 root operator 0, 101 Jan 4 20:59 acd0 crw-rw-rw- 1 root operator 0, 104 Jan 4 20:59 cd0 crw-rw-rw- 1 root operator 0, 100 Jan 4 20:59 pass0 crw-rw-rw- 1 root operator 0, 81 Jan 4 20:59 xpt0 ************************************************************************************************************************ I have atapicam compiled in the kernel I've found similar problem reported in the freebsd-stable mailing list here is the thread http://lists.freebsd.org/pipermail/freebsd-stable/2007-May/035257.html I'm running the latest code from RELENG_7 for amd64 ************************************************************************************************************************ $ uname -a FreeBSD e-soul.org 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 root@e-soul.org:/usr/obj/usr/src/sys/Ss amd64 ************************************************************************************************************************ ************************************************************************************************************************ $ dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 root@e-soul.org:/usr/obj/usr/src/sys/Ss Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (2206.71-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff Features2=0xe39d AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 2 usable memory = 4285259776 (4086 MB) avail memory = 4084604928 (3895 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EB, should be E6 [20070320] est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr b280b2806000b28 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr b280b2806000b28 device_attach: est1 attach returned 6 p4tcc1: on cpu1 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 uhci0: port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xe000-0xe01f irq 17 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 4 ports with 4 removable, self powered pcm0: mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: irq 16 at device 28.0 on pci0 pci4: on pcib2 pcib3: irq 19 at device 28.3 on pci0 pci3: on pcib3 re0: port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3 re0: Using 2 MSI messages miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1d:60:2a:4f:56 re0: [FILTER] re0: [FILTER] pcib4: irq 16 at device 28.4 on pci0 pci2: on pcib4 atapci0: port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] uhci2: port 0xd480-0xd49f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xd800-0xd81f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xd880-0xd89f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib5: at device 30.0 on pci0 pci5: on pcib5 dc0: port 0xb800-0xb8ff mem 0xfeaffc00-0xfeaffcff irq 22 at device 1.0 on pci5 miibus1: on dc0 amphy0: PHY 1 on miibus1 amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:08:a1:27:88:1c dc0: [ITHREAD] rl0: port 0xb400-0xb4ff mem 0xfeaff800-0xfeaff8ff irq 23 at device 2.0 on pci5 miibus2: on rl0 rlphy0: PHY 0 on miibus2 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:19:e0:0e:a7:fa rl0: [ITHREAD] isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata5: on atapci1 ata5: [ITHREAD] ata6: on atapci1 ata6: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci2: port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata7: on atapci2 ata7: [ITHREAD] ata8: on atapci2 ata8: [ITHREAD] acpi_button0: on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: on uhub3 kbd2 at ukbd0 uhid0: on uhub3 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited ad10: 476940MB at ata5-master SATA150 acd0: DVDR at ata6-master SATA150 pcm0: pcm0: SMP: AP CPU #1 Launched! acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 cd0 at ata4 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: cd present [325318 x 2048 byte records] GEOM_LABEL: Label for provider acd0 is iso9660/BROODWAR. Trying to mount root from ufs:/dev/ad10s2a re0: link state changed to UP dc0: link state changed to DOWN dc0: link state changed to UP acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - WRITE_BIG timed out acd0: FAILURE - WRITE_BIG timed out acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - WRITE_BIG timed out acd0: FAILURE - WRITE_BIG timed out acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 ************************************************************************************************************************ this was all working on my previous machine running 7.0 BETA-3 for i386 I've tested this DVD burner on windows and it's working anyone having the same problem ? Regards MGP From owner-freebsd-amd64@FreeBSD.ORG Sat Jan 5 15:21:19 2008 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2A86B16A4DA for ; Sat, 5 Jan 2008 15:21:19 +0000 (UTC) (envelope-from freebsd@abv.bg) Received: from smtp-out.abv.bg (smtp-out.abv.bg [194.153.145.99]) by mx1.freebsd.org (Postfix) with ESMTP id 44E4E13C45D for ; Sat, 5 Jan 2008 15:21:18 +0000 (UTC) (envelope-from freebsd@abv.bg) Received: from mail51.abv.bg (mail51.ni.bg [192.168.151.12]) by smtp-out.abv.bg (Postfix) with ESMTP id 008A0EB32C for ; Sat, 5 Jan 2008 17:21:17 +0200 (EET) DomainKey-Signature: a=rsa-sha1; s=smtp-out; d=abv.bg; c=simple; q=dns; b=ROakM4LHQ2vzZ5rwhXh30Aoze8+ktAf9BhOH86EZwIyD9/IaZpaqajH/AoN2yiPtu J+y2XNEx6x31pPndrAI1Bn6nNkNkXjkoem1gmZrX5JFY6R0KFQRUF3GWldOOAlV6PRp ImH5Vx22JL813SYr6r0VCOCO5vOFndiCSz2Jt4E= Received: from mail51.abv.bg (localhost.localdomain [127.0.0.1]) by mail51.abv.bg (Postfix) with ESMTP id EE8941BD651 for ; Sat, 5 Jan 2008 17:21:09 +0200 (EET) Date: Sat, 5 Jan 2008 17:21:09 +0200 (EET) From: Mario Pavlov To: freebsd-amd64@freebsd.org Message-ID: <2036365664.292711.1199546469974.JavaMail.nobody@mail51.abv.bg> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1251" Content-Transfer-Encoding: 8bit X-Priority: 3 X-Mailer: AbvMail 1.0 X-Originating-IP: 78.128.21.208 Subject: Re: ata(4) problem (unable to burn CDs) X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 05 Jan 2008 15:21:19 -0000 an important detail that I forgot to mention is that my DVD burner is SATA >Hi guys, >I'm experiencing problems with my DVD burner. I can't burn CDs. >When I start k3b and load some data and start the burning it just never starts writing and I'm getting the fallowing errors in the messages log > >************************************************************************************************************************ >Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >Jan 5 09:59:15 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:17 e-soul last message repeated 3 times >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 09:59:19 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 10:02:45 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out >Jan 5 10:06:17 e-soul kernel: acd0: FAILURE - WRITE_BIG timed out >Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >Jan 5 10:06:25 e-soul kernel: acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >************************************************************************************************************************ > > >and this is the k3b debug output after I hit cancel > > >************************************************************************************************************************ >System >----------------------- >K3b Version: 1.0.4 > >KDE Version: 3.5.8 >QT Version: 3.3.8 >Kernel: 7.0-PRERELEASE >Devices >----------------------- >HL-DT-ST DVDRAM GSA-H62N CL00 (/dev/cd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] > >Used versions >----------------------- >cdrecord: 2.1 > >cdrecord >----------------------- >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. >scsidev: '4,0,0' >scsibus: 4 target: 0 lun: 0 >SCSI buffer size: 64512 >/usr/local/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. >/usr/local/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. >/usr/local/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ >Cdrecord-Clone 2.01 (amd64-unknown-freebsd7.0) Copyright (C) 1995-2004 Jörg Schilling >TOC Type: 1 = CD-ROM >Using libscg version 'schily-0.8'. >Driveropts: 'burnfree' >atapi: 0 >Device type : Removable CD-ROM >Version : 0 >Response Format: 2 >Capabilities : >Vendor_info : 'HL-DT-ST' >Identifikation : 'DVDRAM GSA-H62N ' >Revision : 'CL00' >Device seems to be: Generic mmc2 DVD-R/DVD-RW. >Current: 0x0009 >Profile: 0x0012 >Profile: 0x0011 >Profile: 0x0015 >Profile: 0x0016 >Profile: 0x0014 >Profile: 0x0013 >Profile: 0x001A >Profile: 0x001B >Profile: 0x002B >Profile: 0x0010 >Profile: 0x0009 (current) >Profile: 0x000A >Profile: 0x0008 >Profile: 0x0002 >Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). >Driver flags : MMC-3 SWABAUDIO BURNFREE >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R >Drive buf size : 1053696 = 1029 KB >Drive DMA Speed: 5634 kB/s 32x CD 4x DVD >FIFO size : 4194304 = 4096 KB >/usr/local/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler >/usr/local/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). >/usr/local/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. >/usr/local/bin/cdrecord: DMA speed too slow (OK for 26x). Cannot write at speed 48x. >Track 01: data 671 MB >Total size: 770 MB (76:22.93) = 343720 sectors >Lout start: 771 MB (76:24/70) = 343720 sectors >Current Secsize: 2048 >ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, low Beta category (A-) (2) > ATIP start of lead in: -12508 (97:15/17) > ATIP start of lead out: 359845 (79:59/70) >Disk type: Short strategy type (Phthalocyanine or similar) >Manuf. index: 22 >Manufacturer: Ritek Co. >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 >Starting to write CD/DVD at speed 48 in real SAO mode for single session. >Last chance to quit, starting real write in 2 seconds. > 1 seconds. > 0 seconds. Operation starts. >Waiting for reader process to fill input buffer ... input buffer ready. >BURN-Free is ON. >Performing OPC... >Sending CUE sheet... >/usr/local/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 >/usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after 206.695 (200) s >CDB: 2A 00 FF FF FF 6A 00 00 1F 00 >cmd finished after 206.695s timeout 200s >/usr/local/bin/cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error >CDB: 5C 00 00 00 00 00 00 00 0C 00 >status: 0x2 (CHECK CONDITION) >Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 80 29 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >Sense Key: 0x6 Unit Attention, Segment 0 >Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 >Sense flags: Blk 0 (not valid) >cmd finished after 5.095s timeout 200s >Writing pregap for track 1 at -150 >write track pad data: error after 0 bytes >Starting new track at sector: 0 >Track 01: 0 of 671 MB written. >/usr/local/bin/cdrecord: faio_wait_on_buffer for writer timed out. >/usr/local/bin/cdrecord: Caught interrupt. >Track 01: data 671 MB >Total size: 770 MB (76:22.93) = 343720 sectors >Lout start: 771 MB (76:24/70) = 343720 sectors >Current Secsize: 2048 >ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, low Beta category (A-) (2) > ATIP start of lead in: -12508 (97:15/17) > ATIP start of lead out: 359845 (79:59/70) >Disk type: Short strategy type (Phthalocyanine or similar) >Manuf. index: 22 >Manufacturer: Ritek Co. >Blocks total: 359845 Blocks current: 359845 Blocks remaining: 16125 >Writing time: 426.405s >/usr/local/bin/cdrecord: fifo had 64 puts and 1 gets. >/usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > >cdrecord command: >----------------------- >/usr/local/bin/cdrecord -v gracetime=2 dev=4,0,0 speed=48 -dao driveropts=burnfree -eject -data -tsize=343720s - >************************************************************************************************************************ > > >cdrecord is complaining about permissions but I have this in /etc/devfs.conf > > >************************************************************************************************************************ >perm cdrom 0666 >own cdrom root:operator >link cd0 cdwriter >perm cdwriter 0666 >own cdwriter root:operator >perm pass0 0666 >own pass0 root:operator >perm xpt0 0666 >own xpt0 root:operator >************************************************************************************************************************ > > >and also > > >************************************************************************************************************************ >$ ls -l acd0 cd0 pass0 xpt0 >crw-rw-rw- 1 root operator 0, 101 Jan 4 20:59 acd0 >crw-rw-rw- 1 root operator 0, 104 Jan 4 20:59 cd0 >crw-rw-rw- 1 root operator 0, 100 Jan 4 20:59 pass0 >crw-rw-rw- 1 root operator 0, 81 Jan 4 20:59 xpt0 >************************************************************************************************************************ > > >I have atapicam compiled in the kernel >I've found similar problem reported in the freebsd-stable mailing list >here is the thread http://lists.freebsd.org/pipermail/freebsd-stable/2007-May/035257.html > >I'm running the latest code from RELENG_7 for amd64 > > >************************************************************************************************************************ >$ uname -a >FreeBSD e-soul.org 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 root@e-soul.org:/usr/obj/usr/src/sys/Ss amd64 >************************************************************************************************************************ > > >************************************************************************************************************************ >$ dmesg >Copyright (c) 1992-2008 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 7.0-PRERELEASE #6: Fri Jan 4 12:27:16 EET 2008 > root@e-soul.org:/usr/obj/usr/src/sys/Ss >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (2206.71-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 > Features=0xbfebfbff > Features2=0xe39d > AMD Features=0x20100800 > AMD Features2=0x1 > Cores per package: 2 >usable memory = 4285259776 (4086 MB) >avail memory = 4084604928 (3895 MB) >ACPI APIC Table: >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 >ioapic0 irqs 0-23 on motherboard >kbd1 at kbdmux0 >acpi0: on motherboard >acpi0: [ITHREAD] >acpi0: Power Button (fixed) >acpi0: reservation of 0, a0000 (3) failed >acpi0: reservation of 100000, 7ff00000 (3) failed >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 900 >cpu0: on acpi0 >ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EB, should be E6 [20070320] >est0: on cpu0 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr b280b2806000b28 >device_attach: est0 attach returned 6 >p4tcc0: on cpu0 >cpu1: on acpi0 >est1: on cpu1 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr b280b2806000b28 >device_attach: est1 attach returned 6 >p4tcc1: on cpu1 >pcib0: port 0xcf8-0xcff on acpi0 >pci0: on pcib0 >pcib1: irq 16 at device 1.0 on pci0 >pci1: on pcib1 >vgapci0: port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 >uhci0: port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0 >uhci0: [GIANT-LOCKED] >uhci0: [ITHREAD] >usb0: on uhci0 >usb0: USB revision 1.0 >uhub0: on usb0 >uhub0: 2 ports with 2 removable, self powered >uhci1: port 0xe000-0xe01f irq 17 at device 26.1 on pci0 >uhci1: [GIANT-LOCKED] >uhci1: [ITHREAD] >usb1: on uhci1 >usb1: USB revision 1.0 >uhub1: on usb1 >uhub1: 2 ports with 2 removable, self powered >ehci0: mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0 >ehci0: [GIANT-LOCKED] >ehci0: [ITHREAD] >usb2: waiting for BIOS to give up control >usb2: EHCI version 1.0 >usb2: companion controllers, 2 ports each: usb0 usb1 >usb2: on ehci0 >usb2: USB revision 2.0 >uhub2: on usb2 >uhub2: 4 ports with 4 removable, self powered >pcm0: mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0 >pcm0: [ITHREAD] >pcib2: irq 16 at device 28.0 on pci0 >pci4: on pcib2 >pcib3: irq 19 at device 28.3 on pci0 >pci3: on pcib3 >re0: port 0xa800-0xa8ff mem 0xfe9ff000-0xfe9fffff irq 19 at device 0.0 on pci3 >re0: Using 2 MSI messages >miibus0: on re0 >rgephy0: PHY 1 on miibus0 >rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto >re0: Ethernet address: 00:1d:60:2a:4f:56 >re0: [FILTER] >re0: [FILTER] >pcib4: irq 16 at device 28.4 on pci0 >pci2: on pcib4 >atapci0: port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2 >atapci0: [ITHREAD] >atapci0: AHCI called from vendor specific driver >atapci0: AHCI Version 01.00 controller with 2 ports detected >ata2: on atapci0 >ata2: [ITHREAD] >ata3: on atapci0 >ata3: [ITHREAD] >ata4: on atapci0 >ata4: [ITHREAD] >uhci2: port 0xd480-0xd49f irq 23 at device 29.0 on pci0 >uhci2: [GIANT-LOCKED] >uhci2: [ITHREAD] >usb3: on uhci2 >usb3: USB revision 1.0 >uhub3: on usb3 >uhub3: 2 ports with 2 removable, self powered >uhci3: port 0xd800-0xd81f irq 19 at device 29.1 on pci0 >uhci3: [GIANT-LOCKED] >uhci3: [ITHREAD] >usb4: on uhci3 >usb4: USB revision 1.0 >uhub4: on usb4 >uhub4: 2 ports with 2 removable, self powered >uhci4: port 0xd880-0xd89f irq 18 at device 29.2 on pci0 >uhci4: [GIANT-LOCKED] >uhci4: [ITHREAD] >usb5: on uhci4 >usb5: USB revision 1.0 >uhub5: on usb5 >uhub5: 2 ports with 2 removable, self powered >ehci1: mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 >ehci1: [GIANT-LOCKED] >ehci1: [ITHREAD] >usb6: EHCI version 1.0 >usb6: companion controllers, 2 ports each: usb3 usb4 usb5 >usb6: on ehci1 >usb6: USB revision 2.0 >uhub6: on usb6 >uhub6: 6 ports with 6 removable, self powered >pcib5: at device 30.0 on pci0 >pci5: on pcib5 >dc0: port 0xb800-0xb8ff mem 0xfeaffc00-0xfeaffcff irq 22 at device 1.0 on pci5 >miibus1: on dc0 >amphy0: PHY 1 on miibus1 >amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >dc0: Ethernet address: 00:08:a1:27:88:1c >dc0: [ITHREAD] >rl0: port 0xb400-0xb4ff mem 0xfeaff800-0xfeaff8ff irq 23 at device 2.0 on pci5 >miibus2: on rl0 >rlphy0: PHY 0 on miibus2 >rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >rl0: Ethernet address: 00:19:e0:0e:a7:fa >rl0: [ITHREAD] >isab0: at device 31.0 on pci0 >isa0: on isab0 >atapci1: port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 >atapci1: [ITHREAD] >ata5: on atapci1 >ata5: [ITHREAD] >ata6: on atapci1 >ata6: [ITHREAD] >pci0: at device 31.3 (no driver attached) >atapci2: port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0 >atapci2: [ITHREAD] >ata7: on atapci2 >ata7: [ITHREAD] >ata8: on atapci2 >ata8: [ITHREAD] >acpi_button0: on acpi0 >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >sio0: type 16550A >sio0: [FILTER] >atkbdc0: at port 0x60,0x64 on isa0 >atkbd0: irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >atkbd0: [ITHREAD] >psm0: irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: [ITHREAD] >psm0: model IntelliMouse, device ID 3 >sc0: at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >ukbd0: on uhub3 >kbd2 at ukbd0 >uhid0: on uhub3 >Timecounters tick every 1.000 msec >ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited >ad10: 476940MB at ata5-master SATA150 >acd0: DVDR at ata6-master SATA150 >pcm0: >pcm0: >SMP: AP CPU #1 Launched! >acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 >cd0 at ata4 bus 0 target 0 lun 0 >cd0: Removable CD-ROM SCSI-0 device >cd0: 3.300MB/s transfers >cd0: cd present [325318 x 2048 byte records] >GEOM_LABEL: Label for provider acd0 is iso9660/BROODWAR. >Trying to mount root from ufs:/dev/ad10s2a >re0: link state changed to UP >dc0: link state changed to DOWN >dc0: link state changed to UP >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_DVD_STRUCTURE ILLEGAL REQUEST asc=0x30 ascq=0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - WRITE_BIG timed out >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >acd0: FAILURE - MODE_SENSE_BIG ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x02 >************************************************************************************************************************ > >this was all working on my previous machine running 7.0 BETA-3 for i386 > >I've tested this DVD burner on windows and it's working > >anyone having the same problem ? > >Regards >MGP