From owner-freebsd-acpi@FreeBSD.ORG Sun Aug 15 09:00:14 2010 Return-Path: Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 58CF71065673 for ; Sun, 15 Aug 2010 09:00:14 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 2DBE98FC1B for ; Sun, 15 Aug 2010 09:00:14 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o7F90EQa086394 for ; Sun, 15 Aug 2010 09:00:14 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o7F90ESv086390; Sun, 15 Aug 2010 09:00:14 GMT (envelope-from gnats) Date: Sun, 15 Aug 2010 09:00:14 GMT Message-Id: <201008150900.o7F90ESv086390@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: Haris Makripodis Cc: Subject: Re: kern/139088: [acpi] ACPI Exception: AE_AML_INFINITE_LOOP error X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Haris Makripodis List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 15 Aug 2010 09:00:14 -0000 The following reply was made to PR kern/139088; it has been noted by GNATS. From: Haris Makripodis To: bug-followup@FreeBSD.org, alphazo@gmail.com Cc: Subject: Re: kern/139088: [acpi] ACPI Exception: AE_AML_INFINITE_LOOP error Date: Sun, 15 Aug 2010 11:25:38 +0300 Hello to all, I have exaclty the same problem as well, which occures very often:=20 Aug 15 10:00:06 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_SB_.PCI0.LPC_.SMBR] (Node 0xffffff00014ad3a0), = AE_AML_INFINITE_LOOP Aug 15 10:00:06 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_SB_.PCI0.LPC_.INIT] (Node 0xffffff00014ad3c0), = AE_AML_INFINITE_LOOP Aug 15 10:00:06 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_GPE._L00] (Node 0xffffff0001320b40), = AE_AML_INFINITE_LOOP Aug 15 10:00:06 hercules kernel: ACPI Exception: AE_AML_INFINITE_LOOP, = while evaluating GPE method [_L00] (20100331/evgpe-629) Aug 15 10:00:09 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_SB_.PCI0.LPC_.SMBR] (Node 0xffffff00014ad3a0), = AE_AML_INFINITE_LOOP Aug 15 10:00:09 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_SB_.PCI0.LPC_.INIT] (Node 0xffffff00014ad3c0), = AE_AML_INFINITE_LOOP Aug 15 10:00:09 hercules kernel: ACPI Error (psparse-0633): Method = parse/execution failed [\_GPE._L00] (Node 0xffffff0001320b40), = AE_AML_INFINITE_LOOP . . . . . and so on.. Motherboard: Intel D945GCFL2 with 2GB memory module Hard disk: Segate Barracuda 7200.12 SATA 3Gb/s 1TB FreeBSD 8.1-RELEASE amd64 with stock GENERIC kernel BR= From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 16 10:09:16 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 612E21065697 for ; Mon, 16 Aug 2010 10:09:16 +0000 (UTC) (envelope-from demelier.david@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id DF6978FC1E for ; Mon, 16 Aug 2010 10:09:15 +0000 (UTC) Received: by bwz20 with SMTP id 20so2031607bwz.13 for ; Mon, 16 Aug 2010 03:09:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=XbYP1DjzRt38Lg2B7uF4KAIsEWbZVg4wcU9vNY0yNwU=; b=jxPUr6WLIELX1V8Sz3lSGQFYZw41UMZUhve/l3cmizYy4qAizYtUBSAkZeClxRB10w rFGXBXZC77wQeUjSXVSTg7L3wzBVcMVsxRNIQGfHt7Wd0CxXOZz0YF6WM3ZSf/xzol7O 8jJqe5ieU265lh4yhy/N5CqtzrURufm6UCQNM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=spx23K/t9n0bXWrF6ycGKtvEVtZByc9aUd/NMgJrju1Ub3uRkuW1Vj91fVF2HQet8I iTPDc4bPFKI3XanVoMnlwgu3xfIKwl/Os0b8DEHxm6ieH6I/Oktpxq+7ReE7gLzFz4xz wMGh+83mD4f8Cj+IHEcXruH0431pb2tC+/c6U= MIME-Version: 1.0 Received: by 10.204.47.38 with SMTP id l38mr3184652bkf.154.1281951955854; Mon, 16 Aug 2010 02:45:55 -0700 (PDT) Received: by 10.204.83.29 with HTTP; Mon, 16 Aug 2010 02:45:55 -0700 (PDT) In-Reply-To: <20100808101557.000041ed@unknown> References: <35f41cee-79d9-4bad-c4b1-f6f7f816cf6f@me.com> <20100808101557.000041ed@unknown> Date: Mon, 16 Aug 2010 11:45:55 +0200 Message-ID: From: David DEMELIER To: Bruce Cran Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-acpi@freebsd.org, "geoffrey.ferrari" Subject: Re: Black Display after suspend/resume on Thinkpad X201 with 8.1/amd64 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Aug 2010 10:09:16 -0000 2010/8/8 Bruce Cran : > On Sat, 07 Aug 2010 02:30:13 -0700 (PDT) > "geoffrey.ferrari" wrote: > >> The current situation is that the machine will su=EF=BB=BFspend using >> acpiconf -s 3 and it will also resume. The problem is that the LCD >> display does not resume correctly after suspend - instead it just >> stays black. I've been randomly tweaking various things, and get >> slightly different results. Sometimes the display stays black in the >> sense the display is still completely switched off. Othertimes, I >> think the display switches on, but nothing is displayed, so that the >> display is on but showing nothing except a black background. However, >> I can still type blind and e.g. shutdown/restart the machine. > > I'm having the same problem with a Dell XPS M1530 and 9-CURRENT - the > display refuses to switch on after resuming. I've tried > hw.acpi.reset_video, switching consoles using vidcontrol and using the > acpi_video module: setting the reset_video sysctl causes the machine to > reboot during resume, and toggling hw.acpi.video.crt1.active just > produces a beep with no change in the LCD status (it works before > suspend). > > http://blog.higherthings.org/borghardt/article/3077.html suggests that > on a different XPS machine with Linux the VESA BIOS Extensions shouldn't > be saved/restored - is there a way to try disabling that on FreeBSD? > > -- > Bruce Cran > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > Hey, It seems that -CURRENT make my laptop suspend/resume correctly. Before when I was resuming, I canno't do anything even shutdown didn't work (probably panic) here it seems that the screen still stays black but I can shutdown, probably it will works soon :-) --=20 Demelier David From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 16 10:34:09 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C3873106564A for ; Mon, 16 Aug 2010 10:34:09 +0000 (UTC) (envelope-from demelier.david@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 2BE7D8FC13 for ; Mon, 16 Aug 2010 10:34:08 +0000 (UTC) Received: by bwz20 with SMTP id 20so2047683bwz.13 for ; Mon, 16 Aug 2010 03:34:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=xg/wlb9vbTqtMVAgdYXTlu9KpWKHXq2W6FnS2VfxZ+0=; b=e5oQVegioa1eT+X4Puttufhyybb1DRuZjLk9NEX7Mywjta8z5dm9gnox3ucUaLkDrT O2WL2IKSzrMo02755N8IWMgWhZDftwATBiLJ2PHrLnuv3xul+IUuZSSgA7CvM3TctfXg U0+DJ2vIlYwgRzmVV2sdpv+A5qoZ5cPC3vuGs= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=LyohLcIosluBUYbRddgF6wtHF2RY4RyTBNskFvlSoEYwaxpr58nA+fKovng2Drz0oz 6oAjdvHqI+lfYJkfvXheywjFhfx6t3ZEA+huHMwZMEtYbs/XHGhb7gO8PVZ8VHVNogfD 0Y3auh5FS0l7NarV8tlVzqP+8ZQVKTAXa61Tw= MIME-Version: 1.0 Received: by 10.204.100.132 with SMTP id y4mr3246096bkn.117.1281954846644; Mon, 16 Aug 2010 03:34:06 -0700 (PDT) Received: by 10.204.83.29 with HTTP; Mon, 16 Aug 2010 03:34:06 -0700 (PDT) In-Reply-To: References: <35f41cee-79d9-4bad-c4b1-f6f7f816cf6f@me.com> <20100808101557.000041ed@unknown> Date: Mon, 16 Aug 2010 12:34:06 +0200 Message-ID: From: David DEMELIER To: Bruce Cran Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-acpi@freebsd.org, "geoffrey.ferrari" Subject: Re: Black Display after suspend/resume on Thinkpad X201 with 8.1/amd64 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Aug 2010 10:34:09 -0000 2010/8/16 David DEMELIER : > 2010/8/8 Bruce Cran : >> On Sat, 07 Aug 2010 02:30:13 -0700 (PDT) >> "geoffrey.ferrari" wrote: >> >>> The current situation is that the machine will su=EF=BB=BFspend using >>> acpiconf -s 3 and it will also resume. The problem is that the LCD >>> display does not resume correctly after suspend - instead it just >>> stays black. I've been randomly tweaking various things, and get >>> slightly different results. Sometimes the display stays black in the >>> sense the display is still completely switched off. Othertimes, I >>> think the display switches on, but nothing is displayed, so that the >>> display is on but showing nothing except a black background. However, >>> I can still type blind and e.g. shutdown/restart the machine. >> >> I'm having the same problem with a Dell XPS M1530 and 9-CURRENT - the >> display refuses to switch on after resuming. I've tried >> hw.acpi.reset_video, switching consoles using vidcontrol and using the >> acpi_video module: setting the reset_video sysctl causes the machine to >> reboot during resume, and toggling hw.acpi.video.crt1.active just >> produces a beep with no change in the LCD status (it works before >> suspend). >> >> http://blog.higherthings.org/borghardt/article/3077.html suggests that >> on a different XPS machine with Linux the VESA BIOS Extensions shouldn't >> be saved/restored - is there a way to try disabling that on FreeBSD? >> >> -- >> Bruce Cran >> _______________________________________________ >> freebsd-acpi@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >> > > Hey, > > It seems that -CURRENT make my laptop suspend/resume correctly. Before > when I was resuming, I canno't do anything even shutdown didn't work > (probably panic) here it seems that the screen still stays black but I > can shutdown, probably it will works soon :-) > > -- > Demelier David > I enabled device dpms, and vesa stuff in the -CURRENT GENERIC kernel config but for the moment it resumes well (even the screen!) but take a look at the graphic output : http://files.malikania.fr/Photo0176.jpg This is X after resuming. Maybe the graphic card `cache|buffer' should be cleaned. Suspend and resuming works on my laptop now ! --=20 Demelier David From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 16 11:06:53 2010 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EC76D10656A5 for ; Mon, 16 Aug 2010 11:06:53 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id BFBF28FC1A for ; Mon, 16 Aug 2010 11:06:53 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o7GB6r7P058789 for ; Mon, 16 Aug 2010 11:06:53 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o7GB6rUP058787 for freebsd-acpi@FreeBSD.org; Mon, 16 Aug 2010 11:06:53 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 16 Aug 2010 11:06:53 GMT Message-Id: <201008161106.o7GB6rUP058787@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-acpi@FreeBSD.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Aug 2010 11:06:54 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/146715 acpi [acpi] Suspend works, resume not on a HP Probook 4510s o kern/145306 acpi [acpi]: Can't change brightness on HP ProBook 4510s o amd64/144551 acpi [acpi] ACPI issues on SuperMicro X7SPA-H o i386/144045 acpi [acpi] [panic] kernel trap with acpi enabled o i386/143798 acpi [acpi] shutdown problem with SiS K7S5A o kern/143420 acpi [acpi] ACPI issues with Toshiba o kern/142263 acpi [acpi] ACPI regression on Asus K8N7-E deluxe motherboa o kern/142009 acpi [acpi] [panic] Panic in AcpiNsGetAttachedObject o amd64/140751 acpi [acpi] BIOS resource allocation and FreeBSD ACPI in TO o kern/139088 acpi [acpi] ACPI Exception: AE_AML_INFINITE_LOOP error o amd64/138210 acpi [acpi] acer aspire 5536 ACPI problems (S3, brightness, o bin/137053 acpi [hang] FreeBSD 8.0 BETA2Compaq Mini 700 locks on boot o kern/137042 acpi [acpi] hp laptop's lcd not wakes up after suspend to r o i386/136008 acpi [acpi] Dell Vostro 1310 will not shutdown (Requires us o bin/135349 acpi [patch] teach acpidump(8) to disassemble arbitrary mem o kern/135070 acpi [acpi] [patch] BIOS resource allocation and FreeBSD AC o kern/132602 acpi [acpi] ACPI Problem with Intel SS4200: System does not o kern/130683 acpi [ACPI] shutdown hangs after syncing disks - ACPI race? o i386/129953 acpi [acpi] ACPI timeout (CDROM) with Shuttle X27D o kern/129618 acpi [acpi] Problem with ACPI on HP Pavilion DV2899 laptop o kern/129563 acpi [acpi] sleep broken on IBM/Lenovo T61 in amd64 mode f kern/128639 acpi [patch] [acpi_asus] acpi for ASUS A6F,A3E,A3F,A3N not f kern/128634 acpi [patch] fix acpi_asus(4) in asus a6f laptop o kern/124744 acpi [acpi] [patch] incorrect _BST result validation for To o kern/124412 acpi [acpi] power off error on Toshiba M40 laptop o kern/123039 acpi [acpi] ACPI AML_BUFFER_LIMIT errors during boot o kern/121504 acpi [patch] Correctly set hw.acpi.osname on certain machin f kern/121454 acpi [pst] Promise SuperTrak SX6000 does not load during bo o amd64/121439 acpi [boot] Installation of FreeBSD 7.0 fails: ACPI problem o kern/121102 acpi [acpi_fujitsu] [patch] update acpi_fujitsu for the P80 o kern/120515 acpi [acpi] [patch] acpi_alloc_wakeup_handler: can't alloc o kern/119356 acpi [acpi]: i386 ACPI wakeup not work due resource exhaust o kern/119200 acpi [acpi] Lid close switch suspends CPU for 1 second on H o kern/118973 acpi [acpi]: Kernel panic with acpi boot o kern/116939 acpi [acpi] PCI-to-PCI misconfigured for bus three and can o i386/114562 acpi [acpi] cardbus is dead after s3 on Thinkpad T43 with a o kern/114165 acpi [acpi] Dell C810 - ACPI problem s kern/112544 acpi [acpi] [patch] Add High Precision Event Timer Driver f o kern/108954 acpi [acpi] 'sleep(1)' sleeps >1 seconds when speedstep (Cx o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, s kern/91038 acpi [panic] [ata] [acpi] 6.0-RELEASE on Fujitsu Siemens Am s kern/90243 acpi Laptop fan doesn't turn off (ACPI enabled) (Packard Be o i386/83018 acpi [install] Installer will not boot on Asus P4S8X BIOS 1 f kern/81000 acpi [apic] Via 8235 sound card worked great with FreeBSD 5 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys s kern/73823 acpi [request] acpi / power-on by timer support o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/69750 acpi Boot without ACPI failed on ASUS L5 o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop 60 problems total. From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 16 17:54:17 2010 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from [127.0.0.1] (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by hub.freebsd.org (Postfix) with ESMTP id BDCB71065675; Mon, 16 Aug 2010 17:54:17 +0000 (UTC) (envelope-from jkim@FreeBSD.org) From: Jung-uk Kim To: freebsd-acpi@FreeBSD.org Date: Mon, 16 Aug 2010 13:53:32 -0400 User-Agent: KMail/1.6.2 References: <35f41cee-79d9-4bad-c4b1-f6f7f816cf6f@me.com> In-Reply-To: MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <201008161354.03666.jkim@FreeBSD.org> Cc: "geoffrey.ferrari" Subject: Re: Black Display after suspend/resume on Thinkpad X201 with 8.1/amd64 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Aug 2010 17:54:17 -0000 On Monday 16 August 2010 06:34 am, David DEMELIER wrote: > I enabled device dpms, and vesa stuff in the -CURRENT GENERIC > kernel config but for the moment it resumes well (even the screen!) > but take a look at the graphic output : > > http://files.malikania.fr/Photo0176.jpg > > This is X after resuming. Maybe the graphic card `cache|buffer' > should be cleaned. > > Suspend and resuming works on my laptop now ! I am glad to hear it helped. :-) X.org framebuffer corruption is a totally different issue. For example, xf86-video-ati saves/restores everything when VT is switching (not only 2D frame buffer but also 3D texture buffer and some critical GPU registers, etc), which is the behaviour we are heavily relying on. In other words, if X.org driver "owns" the video card, we force switching to the first VT (just as we pressed CTRL-ALT-F1) so that X.org driver "releases" the video card before we suspend console, assuming the current video card state is completely saved by X.org driver. That way, we can just save the console state and we don't need to worry about X.org or whatever. Conversely, when we resume, we just restore the console state and switch VT (just as we pressed ALT-F9) assuming X.org driver will restore the previous state. If any X.org video drivers don't do it properly, we lose. I guess you may be experiencing this problem. We may save/restore "some" video memory contents but it is not a good idea because we can easily clobber X.org driver's idea of current state. Unfortunately, it is even possible some video drivers may not do it any more as Linux people started moving this type of stuff out of X.org drivers into Linux kernel and "old school" stuff (e.g., VT switching from user land) is no longer maintained well or not supported. :-( Jung-uk Kim From owner-freebsd-acpi@FreeBSD.ORG Thu Aug 19 21:10:15 2010 Return-Path: Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6A5D210656A4; Thu, 19 Aug 2010 21:10:15 +0000 (UTC) (envelope-from vwe@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 409898FC28; Thu, 19 Aug 2010 21:10:15 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o7JLAFST006836; Thu, 19 Aug 2010 21:10:15 GMT (envelope-from vwe@freefall.freebsd.org) Received: (from vwe@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o7JLAFkp006822; Thu, 19 Aug 2010 21:10:15 GMT (envelope-from vwe) Date: Thu, 19 Aug 2010 21:10:15 GMT Message-Id: <201008192110.o7JLAFkp006822@freefall.freebsd.org> To: maciej@suszko.eu, vwe@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-acpi@FreeBSD.org From: vwe@FreeBSD.org Cc: Subject: Re: kern/147858: [acpi] acpi_hp not working when loaded via loader.conf X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 19 Aug 2010 21:10:15 -0000 Synopsis: [acpi] acpi_hp not working when loaded via loader.conf State-Changed-From-To: open->feedback State-Changed-By: vwe State-Changed-When: Thu Aug 19 21:08:41 UTC 2010 State-Changed-Why: Maciej, please provide a verbose boot dmesg when acpi_hp is loaded from loader(8) Responsible-Changed-From-To: freebsd-bugs->freebsd-acpi Responsible-Changed-By: vwe Responsible-Changed-When: Thu Aug 19 21:08:41 UTC 2010 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=147858 From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 20 05:34:28 2010 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 003BE1065695; Fri, 20 Aug 2010 05:34:27 +0000 (UTC) (envelope-from maciej@suszko.eu) Received: from mail.suszko.eu (suszko.eu [174.136.96.226]) by mx1.freebsd.org (Postfix) with ESMTP id 9A1098FC17; Fri, 20 Aug 2010 05:34:27 +0000 (UTC) Received: from oxygen.suszko.eu (localhost [127.0.0.1]) by mail.suszko.eu (Postfix) with ESMTP id C09253F491; Fri, 20 Aug 2010 05:04:59 +0000 (UTC) X-Virus-Scanned: amavisd-new using ClamaAV Received: from arsenic (unknown [62.61.57.118]) by mail.suszko.eu (Postfix) with ESMTPSA id 5A4DD3F48E; Fri, 20 Aug 2010 05:04:57 +0000 (UTC) Date: Fri, 20 Aug 2010 07:15:59 +0200 From: Maciej Suszko To: vwe@FreeBSD.org Message-ID: <20100820071559.415eaae5@arsenic> In-Reply-To: <201008192110.o7JLAFkp006822@freefall.freebsd.org> References: <201008192110.o7JLAFkp006822@freefall.freebsd.org> X-Mailer: Claws Mail 3.7.6 (GTK+ 2.20.1; amd64-portbld-freebsd8.1) Mime-Version: 1.0 Content-Type: multipart/signed; micalg=PGP-SHA1; boundary="Sig_/e_jTiuc8wyxNJekoPMGUsE+"; protocol="application/pgp-signature" Cc: freebsd-bugs@FreeBSD.org, freebsd-acpi@FreeBSD.org Subject: Re: kern/147858: [acpi] acpi_hp not working when loaded via loader.conf X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 20 Aug 2010 05:34:28 -0000 --Sig_/e_jTiuc8wyxNJekoPMGUsE+ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable vwe@FreeBSD.org wrote: > Synopsis: [acpi] acpi_hp not working when loaded via loader.conf >=20 > State-Changed-From-To: open->feedback > State-Changed-By: vwe > State-Changed-When: Thu Aug 19 21:08:41 UTC 2010 > State-Changed-Why:=20 > Maciej, > please provide a verbose boot dmesg when acpi_hp is loaded from > loader(8) >=20 >=20 > Responsible-Changed-From-To: freebsd-bugs->freebsd-acpi > Responsible-Changed-By: vwe > Responsible-Changed-When: Thu Aug 19 21:08:41 UTC 2010 > Responsible-Changed-Why:=20 > Over to maintainer(s). >=20 > http://www.freebsd.org/cgi/query-pr.cgi?pr=3D147858 That's dmesg.boot from 8.1-RELEASE with boot_verbose: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #0: Sat Jul 24 16:14:38 CEST 2010 root@arsenic:/usr/obj/usr/src/sys/ARSENIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c30000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80c30220. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80c3088= 8. Preloaded elf obj module "/boot/kernel/if_tap.ko" at 0xffffffff80c30e78. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80c31460. Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff80c31ac8. Preloaded elf obj module "/boot/kernel/coretemp.ko" at 0xffffffff80c320b0. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80c325= a0. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff80c32600. Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff80c32be8. Preloaded elf obj module "/boot/kernel/acpi_wmi.ko" at 0xffffffff80c331d8. Preloaded elf obj module "/boot/kernel/acpi_hp.ko" at 0xffffffff80c33788. Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff80c33d70. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995016248 Hz CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.02-MHz K8-class = CPU) Origin =3D "GenuineIntel" Id =3D 0x6f6 Family =3D 6 Model =3D f Stepp= ing =3D 6 Features=3D0xbfebfbff Features2=3D0xe3bd AMD Features=3D0x20000800 AMD Features2=3D0x1 TSC: P-state invariant real memory =3D 3221225472 (3072 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000c62000 - 0x00000000b9d9cfff, 3105075200 bytes (758075 pages) avail memory =3D 3079778304 (2937 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000014000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf7c00 00024 (v2 HP ) ACPI: XSDT 0xbf7e57c4 00074 (v1 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0xbf7e5684 000F4 (v4 HP 30A2 00000003 HP 00000001) ACPI: DSDT 0xbf7e5ac0 0F9C8 (v1 HP nx7400 00010000 MSFT 0100000E) ACPI: FACS 0xbf7f7e80 00040 ACPI: SLIC 0xbf7e5838 00176 (v1 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 0xbf7e59b0 00038 (v1 HP 30A2 00000001 HP 00000001) ACPI: APIC 0xbf7e59e8 00068 (v1 HP 30A2 00000001 HP 00000001) ACPI: MCFG 0xbf7e5a50 0003C (v1 HP 30A2 00000001 HP 00000001) ACPI: TCPA 0xbf7e5a8c 00032 (v2 HP 30A2 00000001 HP 00000001) ACPI: SSDT 0xbf7f5488 00326 (v1 HP HPQSAT 00000001 MSFT 0100000E) ACPI: SSDT 0xbf7f6003 0025F (v1 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 0xbf7f6262 000A6 (v1 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 0xbf7f6308 004D7 (v1 HP CpuPm 00003000 INTL 20060317) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 random: io: kbd: new array size 4 kbd1 at kbdmux0 mem: nfslock: pseudo-device null: acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C087 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C098.C220.C221 -> bus 2 dev 6 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000009000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C003.C0A2 -> bus 0 dev 31 func 0 acpi_hp0: Couldn't find acpi_wmi device device_attach: acpi_hp0 attach returned 22 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 ACPI: SSDT 0xbf7f5876 0023D (v1 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 0xbf7f5b38 004CB (v1 HP Cpu0Cst 00003001 INTL 20060317) cpu1: on acpi0 ACPI: SSDT 0xbf7f57ae 000C8 (v1 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 0xbf7f5ab3 00085 (v1 HP Cpu1Cst 00003000 INTL 20060317) acpi_hp0: Couldn't find acpi_wmi device device_attach: acpi_hp0 attach returned 22 acpi_ec0: port 0x62,0x66 on acpi0 acpi_ec0: warning: EC done before starting event wait pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 11 Validation 0 11 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 none Validation 0 255 N 0 none After Disable 0 255 N 0 none acpi_hpet0: iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x27a0, revid=3D0x03 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x27a2, revid=3D0x03 domain=3D0, bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf4400000, size 19, enabled map[14]: type I/O Port, range 32, base 0x4000, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xe0000000, size = 28, enabled map[1c]: type Memory, range 32, base 0xf4480000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x27a6, revid=3D0x03 domain=3D0, bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf4500000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x27d8, revid=3D0x01 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf4580000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x27d0, revid=3D0x01 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 n= s) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x27d2, revid=3D0x01 domain=3D0, bus=3D0, slot=3D28, func=3D1 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 n= s) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x27d6, revid=3D0x01 domain=3D0, bus=3D0, slot=3D28, func=3D3 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 n= s) intpin=3Dd, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=3D0x8086, dev=3D0x27c8, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 found-> vendor=3D0x8086, dev=3D0x27c9, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 found-> vendor=3D0x8086, dev=3D0x27ca, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 found-> vendor=3D0x8086, dev=3D0x27cb, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D3 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D10 map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 found-> vendor=3D0x8086, dev=3D0x27cc, revid=3D0x01 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf4584000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4584000 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0xe1 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 n= s) found-> vendor=3D0x8086, dev=3D0x27b9, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x27df, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0x40a0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x27c5, revid=3D0x01 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x13f0, size 3, enabled map[14]: type I/O Port, range 32, base 0x15f4, size 2, enabled map[18]: type I/O Port, range 32, base 0x1370, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1574, size 2, enabled map[20]: type I/O Port, range 32, base 0x40d0, size 4, enabled map[24]: type Memory, range 32, base 0xf4585000, size 10, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 vgapci0: port 0x4000-0x4007 mem 0xf4400000-0xf447f= fff,0xe0000000-0xefffffff,0xf4480000-0xf44bffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf4400000 vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf4480000 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: mem 0xf4500000-0xf457ffff at device 2.1 o= n pci0 hdac0: mem 0xf4580000-0xf45= 83fff irq 16 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20100226_0142 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4580000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 hdac0: using IRQ 256 for MSI hdac0: [MPSAFE] hdac0: [ITHREAD] hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 8 pcib1: subordinate bus 8 pcib1: I/O decode 0xf000-0xfff pcib1: no prefetched decode pci8: on pcib1 pci8: domain=3D0, physical bus=3D8 pcib2: irq 17 at device 28.1 on pci0 pcib2: domain 0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xf4000000-0xf40fffff pcib2: no prefetched decode pci16: on pcib2 pci16: domain=3D0, physical bus=3D16 found-> vendor=3D0x8086, dev=3D0x4222, revid=3D0x02 domain=3D0, bus=3D16, slot=3D0, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf4000000, size 12, enabled pcib2: requested memory range 0xf4000000-0xf4000fff: good pcib2: matched entry for 16.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci16: at device 0.0 (no driver attached) pcib3: irq 19 at device 28.3 on pci0 pcib3: domain 0 pcib3: secondary bus 32 pcib3: subordinate bus 32 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xf0000000-0xf3ffffff pcib3: no prefetched decode pci32: on pcib3 pci32: domain=3D0, physical bus=3D32 uhci0: port 0x4020-0x403f irq 20= at device 29.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup =3D 0x2f00 usbus0: on uhci0 uhci1: port 0x4040-0x405f irq 17= at device 29.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup =3D 0x2f00 usbus1: on uhci1 uhci2: port 0x4060-0x407f irq 18= at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup =3D 0x2f00 usbus2: on uhci2 uhci3: port 0x4080-0x409f irq 19= at device 29.3 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup =3D 0x2f00 usbus3: on uhci3 ehci0: mem 0xf4584000-0xf45843f= f irq 20 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: on ehci0 pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 2 pcib4: subordinate bus 3 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xf4100000-0xf43fffff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci2: on pcib4 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x104c, dev=3D0x8039, revid=3D0x00 domain=3D0, bus=3D2, slot=3D6, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xc4 (49000 ns), maxlat=3D0x03 = (750 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf4100000, size 12, enabled pcib4: requested memory range 0xf4100000-0xf4100fff: good pcib4: matched entry for 2.6.INTA pcib4: slot 6 INTA hardwired to IRQ 18 found-> vendor=3D0x14e4, dev=3D0x170c, revid=3D0x02 domain=3D0, bus=3D2, slot=3D14, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 n= s) intpin=3Da, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf4108000, size 13, enabled pcib4: requested memory range 0xf4108000-0xf4109fff: good pcib4: matched entry for 2.14.INTA pcib4: slot 14 INTA hardwired to IRQ 16 cbb0: mem 0xf4100000-0xf4100fff irq 18 at device 6.0 o= n pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4100000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00824010=20 0x10: 0xf4100000 0x020000a0 0x20030302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112=20 0x40: 0x30a2103c 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x08441060 0x01ab0019 0x00170000 0x01011b22=20 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0x7e020001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0xc3812924 0x1d0197f9 0x00000000 0x00000000=20 bfe0: mem 0xf4108000-0xf4109fff irq 16 = at device 14.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xf4108000 miibus0: on bfe0 bmtphy0: PHY 1 on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:17:a4:d9:2f:91 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54 bfe0: [MPSAFE] bfe0: [ITHREAD] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0x40a0-0x40af irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40a0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ahci0: port 0x13f0-0x13f7,0x15f4-0x15f7,= 0x1370-0x1377,0x1574-0x1577,0x40d0-0x40df mem 0xf4585000-0xf45853ff irq 17 = at device 31.2 on pci0 ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf4585000 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 56 ahci0: using IRQ 257 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.10 with 4 1.5Gbps ports, Port Multiplier supported ahci0: Caps: 64bit NCQ MPS SS ALP AL CLO 1.5Gbps PM PMD SSC PSC 32cmd 4ports ahci0: Caps2: ahcich0: at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: battery0: on acpi0 battery1: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_wmi0: on acpi0 acpi_tz0: on acpi0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_tz3: on acpi0 acpi_tz4: on acpi0 atrtc0: port 0x70-0x71,0x72-0x73 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices coretemp0: on cpu0 est0: on cpu0 p4tcc0: on cpu0 coretemp1: on cpu1 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. Reducing kern.maxvnodes 195721 -> 100000 procfs registered ZFS filesystem version 3 ZFS storage pool version 14 lapic: Divisor 2, Frequency 83125683 Hz Timecounter "TSC" frequency 1995016248 Hz quality -100 Timecounters tick every 1.000 msec vboxdrv: fAsync=3D0 offMin=3D0x114 offMax=3D0x474 lo0: bpf attached ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 battery0: battery initialization start battery1: battery initialization start acpi_acad0: acline initialization start ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd0: setting UDMA33 acpi_tz0: _AC3: temperature 60.0 >=3D setpoint 50.0 acpi_tz0: _AC2: temperature 60.0 >=3D setpoint 60.0 acpi_tz0: switched from NONE to _AC2: 60.0C acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33=20 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc hdac0: Probing codec #0... hdac0: HDA Codec #0: Analog Devices AD1981HD hdac0: HDA Codec ID: 0x11d41981 hdac0: Vendor: 0x11d4 hdac0: Device: 0x1981 hdac0: Revision: 0x02 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x30a2103c hdac0: Found audio FG nid=3D1 startnode=3D2 endnode=3D32 total=3D30 hdac0: Probing codec #1... hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown) hdac0: HDA Codec ID: 0x11c11040 hdac0: Vendor: 0x11c1 hdac0: Device: 0x1040 hdac0: Revision: 0x02 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x30a2103c hdac0: Found modem FG nid=3D1 startnode=3D2 endnode=3D127 total=3D125 hdac0:=20 hdac0: Processing audio FG cad=3D0 nid=3D1... hdac0: GPIO: 0x40000004 NumGPIO=3D4 NumGPO=3D0 NumGPI=3D0 GPIWake=3D0 GPIUn= sol=3D1 hdac0: GHOST: nid=3D2 j=3D0 entnum=3D4 index=3D0 res=3D0x00000401 hdac0: nid 5 0x92174110 as 1 seq 0 Speaker Fixed jack 7 loc 18 co= lor Green misc 1 hdac0: nid 6 0x0421201f as 1 seq 15 Headphones Jack jack 1 loc 4 co= lor Grey misc 0 hdac0: nid 7 0x410710f0 as 15 seq 0 Line-out None jack 7 loc 1 co= lor Black misc 0 hdac0: nid 8 0x04a12020 as 2 seq 0 Mic Jack jack 1 loc 4 co= lor Grey misc 0 hdac0: nid 9 0x0181302e as 2 seq 14 Line-in Jack jack 1 loc 1 co= lor Blue misc 0 hdac0: nid 10 0x4145f0f0 as 15 seq 0 SPDIF-out None jack 5 loc 1 c= olor Other misc 0 hdac0: nid 22 0x995711f0 as 15 seq 0 Digital-out Fixed jack 7 loc 25 c= olor Black misc 1 hdac0: nid 23 0x5993e0f0 as 15 seq 0 AUX None jack 3 loc 25 c= olor White misc 0 hdac0: nid 24 0x59a790f0 as 15 seq 0 Mic None jack 7 loc 25 c= olor Pink misc 0 hdac0: nid 25 0x593310f0 as 15 seq 0 CD None jack 3 loc 25 c= olor Black misc 0 hdac0: Patched pins configuration: hdac0: nid 5 0x92174110 as 1 seq 0 Speaker Fixed jack 7 loc 18 co= lor Green misc 1 hdac0: nid 6 0x0421201f as 1 seq 15 Headphones Jack jack 1 loc 4 co= lor Grey misc 0 hdac0: nid 7 0x410710f0 as 15 seq 0 Line-out None jack 7 loc 1 co= lor Black misc 0 [DISABLED] hdac0: nid 8 0x04a12020 as 2 seq 0 Mic Jack jack 1 loc 4 co= lor Grey misc 0 hdac0: nid 9 0x0181302e as 2 seq 14 Line-in Jack jack 1 loc 1 co= lor Blue misc 0 hdac0: nid 10 0x4145f0f0 as 15 seq 0 SPDIF-out None jack 5 loc 1 c= olor Other misc 0 [DISABLED] hdac0: nid 22 0x995711f0 as 15 seq 0 Digital-out Fixed jack 7 loc 25 c= olor Black misc 1 hdac0: nid 23 0x5993e0f0 as 15 seq 0 AUX None jack 3 loc 25 c= olor White misc 0 [DISABLED] hdac0: nid 24 0x59a790f0 as 15 seq 0 Mic None jack 7 loc 25 c= olor Pink misc 0 [DISABLED] hdac0: nid 25 0x593310f0 as 15 seq 0 CD None jack 3 loc 25 c= olor Black misc 0 [DISABLED] hdac0: 3 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=3D5 seq=3D0 hdac0: Pin nid=3D6 seq=3D15 hdac0: Association 1 (2) in: hdac0: Pin nid=3D8 seq=3D0 hdac0: Pin nid=3D9 seq=3D14 hdac0: Association 2 (15) out: hdac0: Pin nid=3D22 seq=3D0 hdac0: Tracing association 0 (1) hdac0: Pin 5 traced to DAC 3 hdac0: Pin 6 traced to DAC 3 and hpredir 0 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Pin 8 traced to ADC 4 hdac0: Pin 9 traced to ADC 4 hdac0: Association 1 (2) trace succeeded hdac0: Tracing association 2 (15) hdac0: Unable to trace pin 22 seq 0 with min nid 0 hdac0: Association 2 (15) trace failed hdac0: Tracing input monitor hdac0: Tracing nid 12 to out hdac0: Tracing other input monitors hdac0: Tracing nid 8 to out hdac0: nid 8 is input monitor hdac0: Tracing nid 9 to out hdac0: nid 9 is input monitor hdac0: Tracing beeper hdac0: nid 16 traced to out hdac0: Enabling headphone/speaker audio routing switching: hdac0: as=3D0 sense nid=3D6 [UNSOL] hdac0: Pin sense: nid=3D6 res=3D0x8000dfdf hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0:=20 hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0:=20 hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e007f hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz hdac0: IN amp: 0x00270300 hdac0: OUT amp: 0x80053f3d hdac0:=20 hdac0: nid: 2 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00030311 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x00020060 hdac0: 16 bits, 44 48 KHz hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3D1 [GHOST!] [UNKNOWN] (selected) hdac0: + <- nid=3D4 [audio input] hdac0:=20 hdac0: nid: 3 hdac0: Name: audio output hdac0: Widget cap: 0x00000441 hdac0: PWR PROC STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e007f hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz hdac0:=20 hdac0: nid: 4 hdac0: Name: audio input hdac0: Widget cap: 0x00100511 hdac0: PWR STEREO hdac0: Association: 1 (0x00004001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x0006007f hdac0: 16 20 bits, 8 11 16 22 32 44 48 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D21 [audio selector] hdac0:=20 hdac0: nid: 5 hdac0: Name: pin: Speaker (Fixed) hdac0: Widget cap: 0x00400187 hdac0: UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x0001173f hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD hdac0: Pin config: 0x92174110 hdac0: Pin control: 0x00000040 OUT hdac0: EAPD: 0x00000002 hdac0: Output amp: 0x80053f3d hdac0: mute=3D1 step=3D63 size=3D5 offset=3D61 hdac0: Input amp: 0x00270300 hdac0: mute=3D0 step=3D3 size=3D39 offset=3D0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3D3 [audio output] hdac0: + <- nid=3D14 [audio mixer] (selected) hdac0:=20 hdac0: nid: 6 hdac0: Name: pin: Headphones (Grey Jack) hdac0: Widget cap: 0x00400185 hdac0: UNSOL STEREO hdac0: Association: 0 (0x00008000) hdac0: Pin cap: 0x0000001f hdac0: ISC TRQD PDC HP OUT hdac0: Pin config: 0x0421201f hdac0: Pin control: 0x000000c0 HP OUT hdac0: Output amp: 0x80053f3d hdac0: mute=3D1 step=3D63 size=3D5 offset=3D61 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3D3 [audio output] hdac0: + <- nid=3D14 [audio mixer] (selected) hdac0:=20 hdac0: nid: 7 [DISABLED] hdac0: Name: pin: Line-out (None) hdac0: Widget cap: 0x00400104 hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x410710f0 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80053f3d hdac0: mute=3D1 step=3D63 size=3D5 offset=3D61 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=3D15 [audio mixer] [DISABLED] hdac0:=20 hdac0: nid: 8 hdac0: Name: pin: Mic (Grey Jack) hdac0: Widget cap: 0x00400083 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: mic (mic) hdac0: Pin cap: 0x00001727 hdac0: ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x04a12020 hdac0: Pin control: 0x00000024 IN VREFs hdac0: Input amp: 0x00270300 hdac0: mute=3D0 step=3D3 size=3D39 offset=3D0 hdac0:=20 hdac0: nid: 9 hdac0: Name: pin: Line-in (Blue Jack) hdac0: Widget cap: 0x00400187 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00004000) hdac0: OSS: line (line) hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x0181302e hdac0: Pin control: 0x00000024 IN VREFs hdac0: Output amp: 0x80053f3d hdac0: mute=3D1 step=3D63 size=3D5 offset=3D61 hdac0: Input amp: 0x00270300 hdac0: mute=3D0 step=3D3 size=3D39 offset=3D0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3D3 [audio output] (selected) hdac0: + [DISABLED] <- nid=3D14 [audio mixer] hdac0:=20 hdac0: nid: 10 [DISABLED] hdac0: Name: pin: SPDIF-out (None) hdac0: Widget cap: 0x00400301 hdac0: DIGITAL STEREO hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x4145f0f0 hdac0: Pin control: 0x00000000 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D2 [audio output] [DISABLED] hdac0:=20 hdac0: nid: 11 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x00300101 hdac0: STEREO hdac0: connections: 6 hdac0: | hdac0: + <- nid=3D3 [audio output] (selected) hdac0: + <- nid=3D12 [audio mixer] hdac0: + <- nid=3D9 [pin: Line-in (Blue Jack)] hdac0: + <- nid=3D14 [audio mixer] hdac0: + <- nid=3D5 [pin: Speaker (Fixed)] hdac0: + [DISABLED] <- nid=3D24 [pin: Mic (None)] [DISABLED] hdac0:=20 hdac0: nid: 12 hdac0: Name: audio mixer hdac0: Widget cap: 0x00200101 hdac0: STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: mic hdac0: connections: 2 hdac0: | hdac0: + <- nid=3D30 [audio selector] hdac0: + [DISABLED] <- nid=3D31 [audio selector] [DISABLED] hdac0:=20 hdac0: nid: 13 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker hdac0: Output amp: 0x800b0f0f hdac0: mute=3D1 step=3D15 size=3D11 offset=3D15 hdac0: connections: 2 hdac0: | hdac0: + <- nid=3D16 [beep widget] (selected) hdac0: + [DISABLED] <- nid=3D22 [pin: Digital-out (Fixed)] [DISAB= LED] hdac0:=20 hdac0: nid: 14 hdac0: Name: audio mixer hdac0: Widget cap: 0x00200101 hdac0: STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm, speaker, line, mic hdac0: connections: 8 hdac0: | hdac0: + <- nid=3D13 [audio selector] hdac0: + <- nid=3D17 [audio selector] hdac0: + <- nid=3D18 [audio selector] hdac0: + <- nid=3D19 [audio selector] hdac0: + [DISABLED] <- nid=3D26 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=3D27 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=3D28 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=3D29 [audio selector] [DISABLED] hdac0:=20 hdac0: nid: 15 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200100 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D11 [audio selector] [DISABLED] hdac0:=20 hdac0: nid: 16 hdac0: Name: beep widget hdac0: Widget cap: 0x00700000 hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0:=20 hdac0: nid: 17 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D3 [audio output] hdac0:=20 hdac0: nid: 18 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: -2 (0x00000000) hdac0: OSS: mic hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D8 [pin: Mic (Grey Jack)] hdac0:=20 hdac0: nid: 19 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: -2 (0x00000000) hdac0: OSS: line hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D9 [pin: Line-in (Blue Jack)] hdac0:=20 hdac0: nid: 20 [DISABLED] hdac0: Name: power widget hdac0: Widget cap: 0x00500500 hdac0: PWR hdac0: connections: 13 hdac0: | hdac0: + <- nid=3D13 [audio selector] (selected) hdac0: + <- nid=3D14 [audio mixer] hdac0: + <- nid=3D15 [audio mixer] [DISABLED] hdac0: + <- nid=3D16 [beep widget] hdac0: + <- nid=3D19 [audio selector] hdac0: + <- nid=3D20 [power widget] [DISABLED] hdac0: + <- nid=3D21 [audio selector] hdac0: + <- nid=3D22 [pin: Digital-out (Fixed)] [DISABLED] hdac0: + <- nid=3D23 [pin: AUX (None)] [DISABLED] hdac0: + <- nid=3D24 [pin: Mic (None)] [DISABLED] hdac0: + <- nid=3D25 [pin: CD (None)] [DISABLED] hdac0: + <- nid=3D26 [audio selector] [DISABLED] hdac0: + <- nid=3D29 [audio selector] [DISABLED] hdac0:=20 hdac0: nid: 21 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, mic hdac0: Output amp: 0x80050f00 hdac0: mute=3D1 step=3D15 size=3D5 offset=3D0 hdac0: connections: 8 hdac0: | hdac0: + <- nid=3D12 [audio mixer] (selected) hdac0: + <- nid=3D9 [pin: Line-in (Blue Jack)] hdac0: + [DISABLED] <- nid=3D14 [audio mixer] hdac0: + [DISABLED] <- nid=3D15 [audio mixer] [DISABLED] hdac0: + [DISABLED] <- nid=3D25 [pin: CD (None)] [DISABLED] hdac0: + [DISABLED] <- nid=3D5 [pin: Speaker (Fixed)] hdac0: + [DISABLED] <- nid=3D24 [pin: Mic (None)] [DISABLED] hdac0: + [DISABLED] <- nid=3D23 [pin: AUX (None)] [DISABLED] hdac0:=20 hdac0: nid: 22 [DISABLED] hdac0: Name: pin: Digital-out (Fixed) hdac0: Widget cap: 0x00400000 hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x995711f0 hdac0: Pin control: 0x00000000 hdac0:=20 hdac0: nid: 23 [DISABLED] hdac0: Name: pin: AUX (None) hdac0: Widget cap: 0x00400081 hdac0: UNSOL STEREO hdac0: Pin cap: 0x00000027 hdac0: ISC TRQD PDC IN hdac0: Pin config: 0x5993e0f0 hdac0: Pin control: 0x00000000 hdac0:=20 hdac0: nid: 24 [DISABLED] hdac0: Name: pin: Mic (None) hdac0: Widget cap: 0x00400187 hdac0: UNSOL STEREO hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x59a790f0 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80053f3d hdac0: mute=3D1 step=3D63 size=3D5 offset=3D61 hdac0: Input amp: 0x00270300 hdac0: mute=3D0 step=3D3 size=3D39 offset=3D0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3D3 [audio output] (selected) hdac0: + <- nid=3D14 [audio mixer] hdac0:=20 hdac0: nid: 25 [DISABLED] hdac0: Name: pin: CD (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x593310f0 hdac0: Pin control: 0x00000000 hdac0:=20 hdac0: nid: 26 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D5 [pin: Speaker (Fixed)] hdac0:=20 hdac0: nid: 27 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=3D23 [pin: AUX (None)] [DISABLED] hdac0:=20 hdac0: nid: 28 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=3D24 [pin: Mic (None)] [DISABLED] hdac0:=20 hdac0: nid: 29 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80051f17 hdac0: mute=3D1 step=3D31 size=3D5 offset=3D23 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=3D25 [pin: CD (None)] [DISABLED] hdac0:=20 hdac0: nid: 30 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: mic hdac0: Output amp: 0x80000000 hdac0: mute=3D1 step=3D0 size=3D0 offset=3D0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D8 [pin: Mic (Grey Jack)] hdac0:=20 hdac0: nid: 31 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80000000 hdac0: mute=3D1 step=3D0 size=3D0 offset=3D0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=3D24 [pin: Mic (None)] [DISABLED] hdac0:=20 hdac0: Processing modem FG cad=3D1 nid=3D1... hdac0:=20 pcm0: at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0:=20 pcm0: Playback: pcm0:=20 pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e007f pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz pcm0: DAC: 3 pcm0:=20 pcm0: Record: pcm0:=20 pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x0006007f pcm0: 16 20 bits, 8 11 16 22 32 44 48 KHz pcm0: ADC: 4 pcm0:=20 pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0:=20 pcm0: Playback: pcm0:=20 pcm0: nid=3D5 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=3D14 [audio mixer] [src: pcm, speaker, line, mic] pcm0: | pcm0: + <- nid=3D13 [audio selector] [src: speaker] pcm0: | pcm0: + <- nid=3D16 [beep widget] [src: speaker] pcm0: + <- nid=3D17 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=3D3 [audio output] [src: pcm] pcm0: + <- nid=3D18 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=3D8 [pin: Mic (Grey Jack)] [src: mic] pcm0: + <- nid=3D19 [audio selector] [src: line] pcm0: | pcm0: + <- nid=3D9 [pin: Line-in (Blue Jack)] [src: lin= e] pcm0:=20 pcm0: nid=3D6 [pin: Headphones (Grey Jack)] pcm0: | pcm0: + <- nid=3D14 [audio mixer] [src: pcm, speaker, line, mic] pcm0: | pcm0: + <- nid=3D13 [audio selector] [src: speaker] pcm0: | pcm0: + <- nid=3D16 [beep widget] [src: speaker] pcm0: + <- nid=3D17 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=3D3 [audio output] [src: pcm] pcm0: + <- nid=3D18 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=3D8 [pin: Mic (Grey Jack)] [src: mic] pcm0: + <- nid=3D19 [audio selector] [src: line] pcm0: | pcm0: + <- nid=3D9 [pin: Line-in (Blue Jack)] [src: lin= e] pcm0:=20 pcm0: Record: pcm0:=20 pcm0: nid=3D4 [audio input] pcm0: | pcm0: + <- nid=3D21 [audio selector] [src: line, mic] pcm0: | pcm0: + <- nid=3D12 [audio mixer] [src: mic] pcm0: | pcm0: + <- nid=3D30 [audio selector] [src: mic] pcm0: | pcm0: + <- nid=3D8 [pin: Mic (Grey Jack)] [src: = mic] pcm0: + <- nid=3D9 [pin: Line-in (Blue Jack)] [src: line] pcm0:=20 pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0:=20 pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 1 (nid 5 in ): -91/3dB (64 steps) + mute pcm0: +- ctl 3 (nid 6 in ): -91/3dB (64 steps) + mute pcm0:=20 pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 9 (nid 17 out): -34/12dB (32 steps) + mute pcm0:=20 pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- ctl 5 (nid 8 out): 0/30dB (4 steps) pcm0: +- ctl 19 (nid 30 out): mute pcm0:=20 pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- ctl 7 (nid 9 out): 0/30dB (4 steps) pcm0:=20 pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute pcm0:=20 pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute pcm0: +- ctl 19 (nid 30 out): mute pcm0:=20 pcm0: Input Monitoring Level (OSS: igain) pcm0: | pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute pcm0:=20 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap b9c60000, 4000; 0xffffff81483e7000 -> b9c60000 pcm0: sndbuf_setmap b9c70000, 4000; 0xffffff81483f7000 -> b9c70000 ahcich0: AHCI reset... acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC3: temperature 60.0 >=3D setpoint 50.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC3: temperature 60.0 >=3D setpoint 45.0 ahcich0: SATA connect time=3D0ms status=3D00000113 ahcich0: ready wait time=3D2ms ahcich0: AHCI reset done: device found (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 0= x00 0x01 (probe0:ata0:0:0:0): SCSI status error (probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0=20 (probe0:ata0:0:0:0): CAM status: SCSI Status Error (probe0:ata0:0:0:0): SCSI status: Check Condition (probe0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST csi:12,1,0,0 asc:24,0 (Inv= alid field in CDB): Command byte 1 is invalid (probe0:ata0:0:0:0): Error 22, Unretryable error (probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:0:0): SCSI status error (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:0:0): CAM status: SCSI Status Error (probe0:ata0:0:0:0): SCSI status: Check Condition (probe0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium no= t present) (probe0:ata0:0:0:0): Error 6, Unretryable error pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-8 SATA 2.x device pass0: Serial Number S23TJDQZ200497 pass0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ata0 bus 0 scbus1 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device=20 pass1: 33.000MB/s transfers ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number S23TJDQZ200497 ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytesGEOM: new disk c= d0 GEOM: new disk ada0 ) ada0: Command Queueing enabled ada0: 610480MB (1250263728 512 byte sectors: 15H 63S/T 16383C) (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not p= resent) (cd0:ata0:0:0:0): Error 6, Unretryable error cd0 at ata0 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not p= resent) (cd0:ata0:0:0:0): Error 6, Unretryable error (cd0:ata0:0:0:0): SCSI status error (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (cd0:ata0:0:0:0): CAM status: SCSI Status Error (cd0:ata0:0:0:0): SCSI status: Check Condition (cd0:ata0:0:0:0): SCSI sense: NOT READY csi:0,0,bb,0 asc:3a,0 (Medium not p= resent) (cd0:ata0:0:0:0): Error 6, Unretryable error Trying to mount root from zfs:tank/ROOT/freebsd-81 ugen2.2: at usbus2 ums0: on us= bus2 ums0: 8 buttons and [XYZT] coordinates ID=3D0 ct_to_ts([2010-08-20 07:05:11]) =3D 1282287911.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered linsysfs registered vboxnet0: bpf attached vboxnet0: Ethernet address: 0a:00:27:00:00:00 acpi_tz0: _AC3: temperature 60.0 >=3D setpoint 45.0 bfe0: link state changed to UP --=20 regards, Maciej Suszko. --Sig_/e_jTiuc8wyxNJekoPMGUsE+ Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (FreeBSD) iEYEARECAAYFAkxuD5MACgkQCikUk0l7iGp8+wCeKsV0Y0re+7Qks00vqV+yoa4V mgUAnRteV58hgmhB8hVtZJM7L42v/tgH =Y2gt -----END PGP SIGNATURE----- --Sig_/e_jTiuc8wyxNJekoPMGUsE+-- From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 20 09:54:55 2010 Return-Path: Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9DE801065697; Fri, 20 Aug 2010 09:54:55 +0000 (UTC) (envelope-from jh@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 74ADB8FC20; Fri, 20 Aug 2010 09:54:55 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o7K9stkp077437; Fri, 20 Aug 2010 09:54:55 GMT (envelope-from jh@freefall.freebsd.org) Received: (from jh@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o7K9ssRd077433; Fri, 20 Aug 2010 09:54:54 GMT (envelope-from jh) Date: Fri, 20 Aug 2010 09:54:54 GMT Message-Id: <201008200954.o7K9ssRd077433@freefall.freebsd.org> To: youki-k@is.aist-nara.ac.jp, jh@FreeBSD.org, freebsd-acpi@FreeBSD.org, jh@FreeBSD.org From: jh@FreeBSD.org Cc: Subject: Re: i386/54756: ACPI suspend/resume problem on CF-W2 laptop X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 20 Aug 2010 09:54:55 -0000 Synopsis: ACPI suspend/resume problem on CF-W2 laptop State-Changed-From-To: open->feedback State-Changed-By: jh State-Changed-When: Fri Aug 20 09:53:43 UTC 2010 State-Changed-Why: Can you still reproduce this on recent FreeBSD versions? Responsible-Changed-From-To: freebsd-acpi->jh Responsible-Changed-By: jh Responsible-Changed-When: Fri Aug 20 09:53:43 UTC 2010 Responsible-Changed-Why: Track. http://www.freebsd.org/cgi/query-pr.cgi?pr=54756 From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 20 17:17:45 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1040D1065675 for ; Fri, 20 Aug 2010 17:17:45 +0000 (UTC) (envelope-from demelier.david@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 8F9C38FC18 for ; Fri, 20 Aug 2010 17:17:44 +0000 (UTC) Received: by bwz20 with SMTP id 20so3289324bwz.13 for ; Fri, 20 Aug 2010 10:17:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=JvdRjA/j02ONPfNGxj4GtB7NEAFgeRsqjYxd/cNdbEY=; b=ZpOVzNP/c5+NE/xQcYPp8pmFuR0nS1tq0aC6scqXh4+z5ZTWCEI8ICoqr/W9fH4nC2 rPHfyooAP7HXWQmcphrhAU8AS2WA6NCq45ATtu73Pa1tv24re+4h99d3RtSNBmPsvq1L +bkEiNofpLrv9Ww6/Bp3FYIwVs25/OMSNAgus= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=bYqpBmACOoxUxvTWtPthSa2ijKru8FnFrwzVGxIfuMxGTErxUWVGWXaXVV2uLyUKbc 2XqQya/apacNEISVCWnNWtwJ3QOCzMkFxVL+E+A86OWO1GSP18qoSvKJeGUWwP1PInHC h/Cj/KzfQgKvuwN7xmZvzZ7HiVTuqEw+78E8I= MIME-Version: 1.0 Received: by 10.204.82.137 with SMTP id b9mr1119553bkl.127.1282324662494; Fri, 20 Aug 2010 10:17:42 -0700 (PDT) Received: by 10.204.83.29 with HTTP; Fri, 20 Aug 2010 10:17:42 -0700 (PDT) In-Reply-To: <201008161354.03666.jkim@FreeBSD.org> References: <35f41cee-79d9-4bad-c4b1-f6f7f816cf6f@me.com> <201008161354.03666.jkim@FreeBSD.org> Date: Fri, 20 Aug 2010 19:17:42 +0200 Message-ID: From: David DEMELIER To: Jung-uk Kim Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-acpi@freebsd.org, "geoffrey.ferrari" Subject: Re: Black Display after suspend/resume on Thinkpad X201 with 8.1/amd64 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 20 Aug 2010 17:17:45 -0000 2010/8/16 Jung-uk Kim : > On Monday 16 August 2010 06:34 am, David DEMELIER wrote: >> I enabled device dpms, and vesa stuff in the -CURRENT GENERIC >> kernel config but for the moment it resumes well (even the screen!) >> but take a look at the graphic output : >> >> http://files.malikania.fr/Photo0176.jpg >> >> This is X after resuming. Maybe the graphic card `cache|buffer' >> should be cleaned. >> >> Suspend and resuming works on my laptop now ! > > I am glad to hear it helped. :-) > > X.org framebuffer corruption is a totally different issue. =C2=A0For > example, xf86-video-ati saves/restores everything when VT is > switching (not only 2D frame buffer but also 3D texture buffer and > some critical GPU registers, etc), which is the behaviour we are > heavily relying on. =C2=A0In other words, if X.org driver "owns" the vide= o > card, we force switching to the first VT (just as we pressed > CTRL-ALT-F1) so that X.org driver "releases" the video card before we > suspend console, assuming the current video card state is completely > saved by X.org driver. =C2=A0That way, we can just save the console state > and we don't need to worry about X.org or whatever. =C2=A0Conversely, whe= n > we resume, we just restore the console state and switch VT (just as > we pressed ALT-F9) assuming X.org driver will restore the previous > state. =C2=A0If any X.org video drivers don't do it properly, we lose. = =C2=A0I > guess you may be experiencing this problem. =C2=A0We may save/restore > "some" video memory contents but it is not a good idea because we can > easily clobber X.org driver's idea of current state. > > Unfortunately, it is even possible some video drivers may not do it > any more as Linux people started moving this type of stuff out of > X.org drivers into Linux kernel and "old school" stuff (e.g., VT > switching from user land) is no longer maintained well or not > supported. :-( > > Jung-uk Kim > By the way, we can suspend with drm now, but resume make Xorg so slow... Sa= d. --=20 Demelier David