From owner-freebsd-acpi@FreeBSD.ORG Mon Nov 29 07:58:20 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1BC76106564A for ; Mon, 29 Nov 2010 07:58:20 +0000 (UTC) (envelope-from igor.bayunov@oggi.spb.ru) Received: from mail.oggi.spb.ru (mail.oggi.spb.ru [195.218.239.42]) by mx1.freebsd.org (Postfix) with ESMTP id BF5278FC1A for ; Mon, 29 Nov 2010 07:58:18 +0000 (UTC) Received: id oAT7nXKp064403; Mon, 29 Nov 2010 10:49:33 +0300 (MSK) From: "Igor Bayunov" To: Date: Mon, 29 Nov 2010 10:47:28 +0300 Message-ID: <97255D57E33C453D8C82B84EA4EDAFC4@OFFICE.local> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 thread-index: AcuPmavyBGlD2mTiQ2KNYYLuD3xqOg== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.4721 Subject: PCI netwok devices does not work on Intel DP43BFL X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Nov 2010 07:58:20 -0000 Hello, I have a problem with motheboard Intel DP43BFL and FreeBSD-7.3. Any network card (for example 3Com905, Realtek8139) installed in any PCI slot is not found. BIOS has updated. Boot without ACPI failed. FreeBSD-8.1 has the same problem. The following text is in the dmesg: pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND. Full dmesg: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e8f000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e8f200. Calibrating clock(s) ... i8254 clock: 1192026 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2662675856 Hz CPU: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz (2662.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x408e3fd AMD Features=0x20100000 AMD Features2=0x1 Cores per package: 4 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 3072 kbytes, 8-way associative, 64 bytes/line real memory = 3481272320 (3320 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x00000000cb8d8fff, 3398123520 bytes (829620 pages) 0x00000000cf613000 - 0x00000000cf613fff, 4096 bytes (1 pages) 0x00000000cf68c000 - 0x00000000cf7effff, 1458176 bytes (356 pages) avail memory = 3398901760 (3241 MB) Table 'FACP' at 0xcf61bd98 Table 'APIC' at 0xcf61bf18 APIC: Found table at 0xcf61bf18 MP Configuration Table version 1.4 found at 0xc00fc9f0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 3: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 3 ACPI ID 4: enabled SMP: Added CPU 3 (AP) ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 pnpbios: Found PnP BIOS data at 0xc00f0a50 pnpbios: Entry = f0000:bade Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ULE: setup cpu group 2 ULE: setup cpu 2 ULE: adding cpu 2 to group 2: cpus 1 mask 0x4 ULE: setup cpu group 3 ULE: setup cpu 3 ULE: adding cpu 3 to group 3: cpus 1 mask 0x8 ACPI: RSDP @ 0x0xf0410/0x0024 (v 2 INTEL) ACPI: XSDT @ 0x0xcf61ce18/0x0044 (v 1 INTEL DP43BFL 0x00000056 MSFT 0x00010013) ACPI: FACP @ 0x0xcf61bd98/0x00F4 (v 4 INTEL DP43BFL 0x00000056 MSFT 0x00010013) ACPI: DSDT @ 0x0xcf614018/0x61A2 (v 1 INTEL DP43BFL 0x00000056 INTL 0x20051117) ACPI: FACS @ 0x0xcf625e40/0x0040 ACPI: APIC @ 0x0xcf61bf18/0x006C (v 2 INTEL DP43BFL 0x00000056 MSFT 0x00010013) ACPI: MCFG @ 0x0xcf61df18/0x003C (v 1 INTEL DP43BFL 0x00000056 MSFT 0x00000097) ACPI: HPET @ 0x0xcf61de98/0x0038 (v 1 INTEL DP43BFL 0x00000056 AMI. 0x00000003) MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan_amrr: wlan: <802.11 Link Layer> random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010 06:13:51) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa08 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2e208086) pcibios: No call entry point AcpiOsDerivePciId: \\_SB_.PCI0.GFX0.IGDP -> bus 0 dev 2 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc680c000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2e20, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2e21, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a37, revid=0x00 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xf0c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a38, revid=0x00 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xf0a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x3a39, revid=0x00 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0xf080, size 5, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3c, revid=0x00 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe3406000, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3e, revid=0x00 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe3400000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x3a40, revid=0x00 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a42, revid=0x00 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a44, revid=0x00 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a46, revid=0x00 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a48, revid=0x00 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x3a4a, revid=0x00 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3a34, revid=0x00 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x3a35, revid=0x00 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a36, revid=0x00 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a3a, revid=0x00 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe3405000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x90 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a18, revid=0x00 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3a20, revid=0x00 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf190, size 3, enabled map[14]: type I/O Port, range 32, base 0xf180, size 2, enabled map[18]: type I/O Port, range 32, base 0xf170, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf160, size 2, enabled map[20]: type I/O Port, range 32, base 0xf150, size 4, enabled map[24]: type I/O Port, range 32, base 0xf140, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3a30, revid=0x00 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 64, base 0xe3404000, size 8, enabled map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3a26, revid=0x00 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf130, size 3, enabled map[14]: type I/O Port, range 32, base 0xf120, size 2, enabled map[18]: type I/O Port, range 32, base 0xf110, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf100, size 2, enabled map[20]: type I/O Port, range 32, base 0xf0f0, size 4, enabled map[24]: type I/O Port, range 32, base 0xf0e0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xd0000000-0xe30fffff pcib1: no prefetched decode pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x06e4, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe2000000, size 24, enabled pcib1: requested memory range 0xe2000000-0xe2ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xe0000000, size 25, enabled pcib1: requested memory range 0xe0000000-0xe1ffffff: good map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled pcib1: requested I/O range 0xe000-0xe07f: in range pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0xe000-0xe07f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1 uhci0: port 0xf0c0-0xf0df irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0c0 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xf0a0-0xf0bf irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0a0 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xf080-0xf09f irq 18 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf080 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xe3406000-0xe34063ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe3406000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: waiting for BIOS to give up control usb3: timed out waiting for BIOS usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pci0: at device 27.0 (no driver attached) pcib2: irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xe3300000-0xe33fffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x11ab, dev=0x6101, revid=0xb2 domain=0, bus=2, slot=0, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xd040, size 3, enabled pcib2: requested I/O range 0xd040-0xd047: in range map[14]: type I/O Port, range 32, base 0xd030, size 2, enabled pcib2: requested I/O range 0xd030-0xd033: in range map[18]: type I/O Port, range 32, base 0xd020, size 3, enabled pcib2: requested I/O range 0xd020-0xd027: in range map[1c]: type I/O Port, range 32, base 0xd010, size 2, enabled pcib2: requested I/O range 0xd010-0xd013: in range map[20]: type I/O Port, range 32, base 0xd000, size 4, enabled pcib2: requested I/O range 0xd000-0xd00f: in range map[24]: type Memory, range 32, base 0xe3300000, size 9, enabled pcib2: requested memory range 0xe3300000-0xe33001ff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 atapci0: port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xe3300000-0xe33001ff irq 16 at device 0.0 on pci2 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd040 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd030 ata2: reset tp1 mask=03 ostat0=60 ostat1=70 ata2: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata2: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata2: reset tp2 stat0=20 stat1=30 devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] pcib3: irq 16 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 pcib4: irq 18 at device 28.2 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 pcib5: irq 19 at device 28.3 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pci5: on pcib5 pci5: domain=0, physical bus=5 pcib6: irq 17 at device 28.4 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xf000-0xfff pcib6: no prefetched decode pci6: on pcib6 pci6: domain=0, physical bus=6 pcib7: irq 16 at device 28.5 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xf000-0xfff pcib7: memory decode 0xe3200000-0xe32fffff pcib7: no prefetched decode pci7: on pcib7 pci7: domain=0, physical bus=7 found-> vendor=0x14e4, dev=0x1691, revid=0x01 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe3200000, size 16, enabled pcib7: requested memory range 0xe3200000-0xe320ffff: good pcib7: matched entry for 7.0.INTA pcib7: slot 0 INTA hardwired to IRQ 17 bge0: mem 0xe3200000-0xe320ffff irq 17 at device 0.0 on pci7 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe3200000 bge0: adjust device control 0x0000 -> 0x5000 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 52 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: on bge0 ukphy0: PHY 1 on miibus0 ukphy0: OUI 0x00d897, model 0x0019, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:1c:c0:cc:54:5f bge0: [MPSAFE] bge0: [FILTER] uhci3: port 0xf060-0xf07f irq 23 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf060 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xf040-0xf05f irq 19 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf040 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: port 0xf020-0xf03f irq 18 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf020 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: on uhci5 usb6: USB revision 1.0 uhub6: on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: mem 0xe3405000-0xe34053ff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe3405000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: waiting for BIOS to give up control usb7: timed out waiting for BIOS usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: on ehci1 usb7: USB revision 2.0 uhub7: on usb7 uhub7: 6 ports with 6 removable, self powered pcib8: at device 30.0 on pci0 pcib8: domain 0 pcib8: secondary bus 32 pcib8: subordinate bus 8 pcib8: I/O decode 0xc000-0xcfff pcib8: memory decode 0xe3100000-0xe31fffff pcib8: no prefetched decode pcib8: Subtractively decoded bridge. pci32: on pcib8 pci32: domain=0, physical bus=32 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f,0xf140 -0xf14f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf150 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf140 ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf190 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf180 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf170 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf160 ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: [MPSAFE] ata4: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci2: port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff,0xf0e0 -0xf0ef irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf0f0 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf0e0 ata5: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf130 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf120 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf110 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf100 ata6: reset tp1 mask=03 ostat0=7f ostat1=7f ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff ata6: reset tp2 stat0=ff stat1=ff devices=0x0 ata6: [MPSAFE] ata6: [ITHREAD] acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ sio0: irq maps: 0xca9 0xcb9 0xca9 0xca9 sio0: irq maps: 0xca9 0xcb9 0xca9 0xca9 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] cpu0: on acpi0 ACPI: SSDT @ 0x0xcf61fc18/0x0374 (v 1 AMI IST 0x00000001 MSFT 0x03000001) est0: on cpu0 est0: Invalid id16 (set, cur) = (1821, 2085) est0: Invalid freq 2331, ignored. est0: Invalid id16 (set, cur) = (1558, 2085) est0: Invalid freq 1998, ignored. p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est1: Invalid id16 (set, cur) = (1821, 2085) est1: Invalid freq 2331, ignored. est1: Invalid id16 (set, cur) = (1558, 2085) est1: Invalid freq 1998, ignored. p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est2: Invalid id16 (set, cur) = (1821, 2085) est2: Invalid freq 2331, ignored. est2: Invalid id16 (set, cur) = (1558, 2085) est2: Invalid freq 1998, ignored. p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est3: Invalid id16 (set, cur) = (1821, 2085) est3: Invalid freq 2331, ignored. est3: Invalid id16 (set, cur) = (1558, 2085) est3: Invalid freq 1998, ignored. p4tcc3: on cpu3 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xcf000-0xd0fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57 ata0: [MPSAFE] ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58 ata1: [MPSAFE] ata1: [ITHREAD] bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xca9 0xca9 0xca9 0xca9 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 213889 -> 100000 procfs registered lapic: Divisor 2, Frequency 166417245 hz Timecounter "TSC" frequency 2662675856 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: 76319MB at ata3-master SATA150 ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 ad6: Intel check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDR drive at ata4 as master acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 2 ioapic0: Assigning ISA IRQ 14 to local APIC 3 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 2 ioapic0: Assigning PCI IRQ 19 to local APIC 3 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 msi: Assigning MSI IRQ 256 to local APIC 2 Trying to mount root from ufs:/dev/ad6s1a start_init: trying /sbin/init From owner-freebsd-acpi@FreeBSD.ORG Mon Nov 29 11:06:54 2010 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 05B141065675 for ; Mon, 29 Nov 2010 11:06:54 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id CD7CF8FC13 for ; Mon, 29 Nov 2010 11:06:53 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id oATB6rOj052999 for ; Mon, 29 Nov 2010 11:06:53 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id oATB6rNl052997 for freebsd-acpi@FreeBSD.org; Mon, 29 Nov 2010 11:06:53 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 29 Nov 2010 11:06:53 GMT Message-Id: <201011291106.oATB6rNl052997@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-acpi@FreeBSD.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Nov 2010 11:06:54 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/146715 acpi [acpi] Suspend works, resume not on a HP Probook 4510s o kern/145306 acpi [acpi]: Can't change brightness on HP ProBook 4510s o amd64/144551 acpi [acpi] ACPI issues on SuperMicro X7SPA-H o i386/144045 acpi [acpi] [panic] kernel trap with acpi enabled o i386/143798 acpi [acpi] shutdown problem with SiS K7S5A o kern/143420 acpi [acpi] ACPI issues with Toshiba o kern/142263 acpi [acpi] ACPI regression on Asus K8N7-E deluxe motherboa o kern/142009 acpi [acpi] [panic] Panic in AcpiNsGetAttachedObject o amd64/140751 acpi [acpi] BIOS resource allocation and FreeBSD ACPI in TO o kern/139088 acpi [acpi] ACPI Exception: AE_AML_INFINITE_LOOP error o amd64/138210 acpi [acpi] acer aspire 5536 ACPI problems (S3, brightness, o bin/137053 acpi [hang] FreeBSD 8.0 BETA2Compaq Mini 700 locks on boot o kern/137042 acpi [acpi] hp laptop's lcd not wakes up after suspend to r o i386/136008 acpi [acpi] Dell Vostro 1310 will not shutdown (Requires us o bin/135349 acpi [patch] teach acpidump(8) to disassemble arbitrary mem o kern/135070 acpi [acpi] [patch] BIOS resource allocation and FreeBSD AC o kern/132602 acpi [acpi] ACPI Problem with Intel SS4200: System does not o kern/130683 acpi [ACPI] shutdown hangs after syncing disks - ACPI race? o i386/129953 acpi [acpi] ACPI timeout (CDROM) with Shuttle X27D o kern/129618 acpi [acpi] Problem with ACPI on HP Pavilion DV2899 laptop o kern/129563 acpi [acpi] sleep broken on IBM/Lenovo T61 in amd64 mode p kern/128634 acpi [patch] fix acpi_asus(4) in asus a6f laptop o kern/124744 acpi [acpi] [patch] incorrect _BST result validation for To o kern/124412 acpi [acpi] power off error on Toshiba M40 laptop o kern/123039 acpi [acpi] ACPI AML_BUFFER_LIMIT errors during boot o kern/121504 acpi [patch] Correctly set hw.acpi.osname on certain machin o amd64/121439 acpi [boot] Installation of FreeBSD 7.0 fails: ACPI problem o kern/121102 acpi [acpi] [patch] update acpi_fujitsu for the P8010 o kern/120515 acpi [acpi] [patch] acpi_alloc_wakeup_handler: can't alloc o kern/119356 acpi [acpi]: i386 ACPI wakeup not work due resource exhaust o kern/119200 acpi [acpi] Lid close switch suspends CPU for 1 second on H o kern/118973 acpi [acpi]: Kernel panic with acpi boot o kern/116939 acpi [acpi] PCI-to-PCI misconfigured for bus three and can o i386/114562 acpi [acpi] cardbus is dead after s3 on Thinkpad T43 with a o kern/114165 acpi [acpi] Dell C810 - ACPI problem s kern/112544 acpi [acpi] [patch] Add High Precision Event Timer Driver f o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, s kern/91038 acpi [panic] [ata] [acpi] 6.0-RELEASE on Fujitsu Siemens Am s kern/90243 acpi Laptop fan doesn't turn off (ACPI enabled) (Packard Be o i386/83018 acpi [install] Installer will not boot on Asus P4S8X BIOS 1 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys o kern/73823 acpi [request] acpi / power-on by timer support o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/69750 acpi Boot without ACPI failed on ASUS L5 o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 55 problems total. From owner-freebsd-acpi@FreeBSD.ORG Mon Nov 29 15:32:17 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A83F21065674 for ; Mon, 29 Nov 2010 15:32:17 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from cyrus.watson.org (cyrus.watson.org [65.122.17.42]) by mx1.freebsd.org (Postfix) with ESMTP id 774208FC17 for ; Mon, 29 Nov 2010 15:32:17 +0000 (UTC) Received: from bigwig.baldwin.cx (66.111.2.69.static.nyinternet.net [66.111.2.69]) by cyrus.watson.org (Postfix) with ESMTPSA id 2526746B03; Mon, 29 Nov 2010 10:32:17 -0500 (EST) Received: from jhbbsd.localnet (smtp.hudson-trading.com [209.249.190.9]) by bigwig.baldwin.cx (Postfix) with ESMTPSA id D13388A01D; Mon, 29 Nov 2010 10:32:14 -0500 (EST) From: John Baldwin To: freebsd-acpi@freebsd.org Date: Mon, 29 Nov 2010 07:55:32 -0500 User-Agent: KMail/1.13.5 (FreeBSD/7.3-CBSD-20101102; KDE/4.4.5; amd64; ; ) References: <97255D57E33C453D8C82B84EA4EDAFC4@OFFICE.local> In-Reply-To: <97255D57E33C453D8C82B84EA4EDAFC4@OFFICE.local> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <201011290755.32323.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.2.6 (bigwig.baldwin.cx); Mon, 29 Nov 2010 10:32:14 -0500 (EST) X-Virus-Scanned: clamav-milter 0.96.3 at bigwig.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-1.9 required=4.2 tests=BAYES_00 autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on bigwig.baldwin.cx Cc: Igor Bayunov Subject: Re: PCI netwok devices does not work on Intel DP43BFL X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Nov 2010 15:32:17 -0000 On Monday, November 29, 2010 2:47:28 am Igor Bayunov wrote: > Hello, > I have a problem with motheboard Intel DP43BFL and FreeBSD-7.3. > Any network card (for example 3Com905, Realtek8139) installed in any PCI > slot is not found. > BIOS has updated. Boot without ACPI failed. > FreeBSD-8.1 has the same problem. > The following text is in the dmesg: > pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - > AE_NOT_FOUND. You can ignore this message. You have a busted BIOS however, but we should be able to work around it. The problem is here: > pcib8: at device 30.0 on pci0 > pcib8: domain 0 > pcib8: secondary bus 32 > pcib8: subordinate bus 8 > pcib8: I/O decode 0xc000-0xcfff > pcib8: memory decode 0xe3100000-0xe31fffff > pcib8: no prefetched decode > pcib8: Subtractively decoded bridge. > pci32: on pcib8 > pci32: domain=0, physical bus=32 The 'secondary bus' on a PCI-PCI bridge must be <= the subordinate bus number. I suspect if you boot Linux it whines about needing to adjust the bus number to 8? -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Tue Nov 30 08:44:39 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7A969106564A for ; Tue, 30 Nov 2010 08:44:39 +0000 (UTC) (envelope-from igor.bayunov@oggi.spb.ru) Received: from mail.oggi.spb.ru (mail.oggi.spb.ru [195.218.239.42]) by mx1.freebsd.org (Postfix) with ESMTP id 0859C8FC1A for ; Tue, 30 Nov 2010 08:44:38 +0000 (UTC) Received: id oAU8kX5L016574; Tue, 30 Nov 2010 11:46:33 +0300 (MSK) From: "Igor Bayunov" To: "'John Baldwin'" References: <97255D57E33C453D8C82B84EA4EDAFC4@OFFICE.local> <201011290755.32323.jhb@freebsd.org> Date: Tue, 30 Nov 2010 11:44:00 +0300 Message-ID: <99A270619F4846EE9118D88D097C4CFE@OFFICE.local> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.4721 In-Reply-To: <201011290755.32323.jhb@freebsd.org> thread-index: AcuP2uD1xKdE7dbwQN2xX6KWQto0wQAjHvUw Cc: freebsd-acpi@freebsd.org Subject: RE: PCI netwok devices does not work on Intel DP43BFL X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2010 08:44:39 -0000 John, thanks for the reply. Linux boot I have not tried, but under WinXP network works. How can I fix this problem under FreeBSD or need to wait for a new BIOS? -----Original Message----- From: John Baldwin [mailto:jhb@freebsd.org] Sent: Monday, November 29, 2010 3:56 PM To: freebsd-acpi@freebsd.org Cc: Igor Bayunov Subject: Re: PCI netwok devices does not work on Intel DP43BFL On Monday, November 29, 2010 2:47:28 am Igor Bayunov wrote: > Hello, > I have a problem with motheboard Intel DP43BFL and FreeBSD-7.3. > Any network card (for example 3Com905, Realtek8139) installed in any > PCI slot is not found. > BIOS has updated. Boot without ACPI failed. > FreeBSD-8.1 has the same problem. > The following text is in the dmesg: > pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 > - AE_NOT_FOUND. You can ignore this message. You have a busted BIOS however, but we should be able to work around it. The problem is here: > pcib8: at device 30.0 on pci0 > pcib8: domain 0 > pcib8: secondary bus 32 > pcib8: subordinate bus 8 > pcib8: I/O decode 0xc000-0xcfff > pcib8: memory decode 0xe3100000-0xe31fffff > pcib8: no prefetched decode > pcib8: Subtractively decoded bridge. > pci32: on pcib8 > pci32: domain=0, physical bus=32 The 'secondary bus' on a PCI-PCI bridge must be <= the subordinate bus number. I suspect if you boot Linux it whines about needing to adjust the bus number to 8? -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Sat Dec 4 14:15:33 2010 Return-Path: Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C489B1065673; Sat, 4 Dec 2010 14:15:33 +0000 (UTC) (envelope-from remko@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 99D248FC0A; Sat, 4 Dec 2010 14:15:33 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id oB4EFXE9051423; Sat, 4 Dec 2010 14:15:33 GMT (envelope-from remko@freefall.freebsd.org) Received: (from remko@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id oB4EFXNC051419; Sat, 4 Dec 2010 14:15:33 GMT (envelope-from remko) Date: Sat, 4 Dec 2010 14:15:33 GMT Message-Id: <201012041415.oB4EFXNC051419@freefall.freebsd.org> To: remko@FreeBSD.org, freebsd-i386@FreeBSD.org, freebsd-acpi@FreeBSD.org From: remko@FreeBSD.org Cc: Subject: Re: kern/152438: [acpi]: patch to acpi_asus(4) to add extra sysctls for ASUS EeePCs X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2010 14:15:33 -0000 Old Synopsis: patch to acpi_asus(4) to add extra sysctls for ASUS EeePCs New Synopsis: [acpi]: patch to acpi_asus(4) to add extra sysctls for ASUS EeePCs Responsible-Changed-From-To: freebsd-i386->freebsd-acpi Responsible-Changed-By: remko Responsible-Changed-When: Sat Dec 4 14:15:19 UTC 2010 Responsible-Changed-Why: Reassign to acpi team. http://www.freebsd.org/cgi/query-pr.cgi?pr=152438