Date: Sun, 24 Jan 2010 16:02:37 GMT From: sng <piokud84@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/143173: Promise FastTrack TX4 + sata DVD, instalator can't mount cd and install system Message-ID: <201001241602.o0OG2bEr093260@www.freebsd.org> Resent-Message-ID: <201001241610.o0OGA2I8001084@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 143173
>Category: amd64
>Synopsis: Promise FastTrack TX4 + sata DVD, instalator can't mount cd and install system
>Confidential: no
>Severity: non-critical
>Priority: high
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Jan 24 16:10:01 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: sng
>Release: AMD64 8.0- STABLE
>Organization:
>Environment:
>Description:
I was going to install FreeBSD on machine with Promise FastTrack TX4 and SATA DVD (Plextor PX-810SA) connected to it. CD is booting, but im getting this error:
ata2: SIGNATURE: eb140101
ata2: SIGNATURE: ffffffff
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: CDROM <PLEXTOR DVDR PX-810SA/1.00> at ata2-master SATA150
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
Im getting sysinstall menu, I can set partitions and so on but instlator can't mount cd and install system on HDD. I had to install from net or UBS stick.
Full DMESG:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 285 SE (2588.98-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
real memory = 8589934592 (8192 MB)
avail memory = 7712686080 (7355 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfec01000-0xfec013ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xff3ed000-0xff3edfff irq 19 at device 0.0 on pci1
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xff3ee000-0xff3eefff irq 19 at device 0.1 on pci1
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
pci1: <network> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 2.0 on pci2
pci3: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xe0000000-0xefffffff,0xff4f0000-0xff4fffff irq 26 at device 0.0 on pci3
pci3: <multimedia, HDA> at device 0.1 (no driver attached)
pci2: <multimedia, audio> at device 3.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci1: <Promise PDC40718 SATA300 controller> port 0xbc00-0xbc7f,0xb800-0xb8ff mem 0xff5ff000-0xff5fffff,0xff5c0000-0xff5dffff irq 29 at device 1.0 on pci4
atapci1: [ITHREAD]
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: SIGNATURE: eb140101
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: SIGNATURE: 00000101
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: SIGNATURE: 00000101
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
device_attach: powernow1 attach returned 6
cpu2: <ACPI CPU> on acpi0
powernow2: <Cool`n'Quiet K8> on cpu2
device_attach: powernow2 attach returned 6
cpu3: <ACPI CPU> on acpi0
powernow3: <Cool`n'Quiet K8> on cpu3
device_attach: powernow3 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen1.2: <Logitech> at usbus1
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/49.00, addr 2> on usbus1
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/49.00, addr 2> on usbus1
ata2: SIGNATURE: eb140101
ata2: SIGNATURE: ffffffff
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: CDROM <PLEXTOR DVDR PX-810SA/1.00> at ata2-master SATA150
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
acd0: timeout waiting to issue command
acd0: error issuing ATA PACKET command
ad6: 152627MB <MAXTOR STM3160811AS 3.AAE> at ata3-master SATA150
ad10: 152627MB <MAXTOR STM3160811AS 3.AAE> at ata5-master SATA150
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/ad10s1a
>How-To-Repeat:
Connect sata dvd to PCI Promise FastTrack TX4 controler- that do the magic...
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001241602.o0OG2bEr093260>