From owner-freebsd-scsi@FreeBSD.ORG Mon Aug 15 11:07:10 2011 Return-Path: Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9B30C106564A for ; Mon, 15 Aug 2011 11:07:10 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 80C248FC24 for ; Mon, 15 Aug 2011 11:07:10 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p7FB7Arr014848 for ; Mon, 15 Aug 2011 11:07:10 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p7FB796c014846 for freebsd-scsi@FreeBSD.org; Mon, 15 Aug 2011 11:07:09 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 15 Aug 2011 11:07:09 GMT Message-Id: <201108151107.p7FB796c014846@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 15 Aug 2011 11:07:10 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/159412 scsi [ciss] 7.3 RELEASE: ciss0 ADAPTER HEARTBEAT FAILED err o kern/157770 scsi [iscsi] [panic] iscsi_initiator panic o kern/154432 scsi [xpt] run_interrupt_driven_hooks: still waiting after o kern/153514 scsi [cam] [panic] CAM related panic o kern/153361 scsi [ciss] Smart Array 5300 boot/detect drive problem o kern/152250 scsi [ciss] [patch] Kernel panic when hw.ciss.expose_hidden o kern/151564 scsi [ciss] ciss(4) should increase CISS_MAX_LOGICAL to 10 o docs/151336 scsi Missing documentation of scsi_ and ata_ functions in c s kern/149927 scsi [cam] hard drive not stopped before removing power dur o kern/148083 scsi [aac] Strange device reporting o kern/147704 scsi [mpt] sys/dev/mpt: new chip revision, partially unsupp o kern/146287 scsi [ciss] ciss(4) cannot see more than one SmartArray con o kern/145768 scsi [mpt] can't perform I/O on SAS based SAN disk in freeb o kern/144648 scsi [aac] Strange values of speed and bus width in dmesg o kern/144301 scsi [ciss] [hang] HP proliant server locks when using ciss o kern/142351 scsi [mpt] LSILogic driver performance problems o kern/141934 scsi [cam] [patch] add support for SEAGATE DAT Scopion 130 o kern/134488 scsi [mpt] MPT SCSI driver probes max. 8 LUNs per device o kern/132250 scsi [ciss] ciss driver does not support more then 15 drive o kern/132206 scsi [mpt] system panics on boot when mirroring and 2nd dri o kern/130621 scsi [mpt] tranfer rate is inscrutable slow when use lsi213 o kern/129602 scsi [ahd] ahd(4) gets confused and wedges SCSI bus o kern/128452 scsi [sa] [panic] Accessing SCSI tape drive randomly crashe o kern/128245 scsi [scsi] "inquiry data fails comparison at DV1 step" [re o kern/127927 scsi [isp] isp(4) target driver crashes kernel when set up o kern/127717 scsi [ata] [patch] [request] - support write cache toggling o kern/124667 scsi [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi o kern/123674 scsi [ahc] ahc driver dumping o kern/123520 scsi [ahd] unable to boot from net while using ahd o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc o kern/120487 scsi [sg] scsi_sg incompatible with scanners o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression] o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load o kern/60598 scsi wire down of scsi devices conflicts with config s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o bin/57088 scsi [cam] [patch] for a possible fd leak in libcam.c o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce 48 problems total. From owner-freebsd-scsi@FreeBSD.ORG Thu Aug 18 19:42:24 2011 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9AC0D106566B for ; Thu, 18 Aug 2011 19:42:24 +0000 (UTC) (envelope-from ken@kdm.org) Received: from nargothrond.kdm.org (nargothrond.kdm.org [70.56.43.81]) by mx1.freebsd.org (Postfix) with ESMTP id 4B6328FC0C for ; Thu, 18 Aug 2011 19:42:24 +0000 (UTC) Received: from nargothrond.kdm.org (localhost [127.0.0.1]) by nargothrond.kdm.org (8.14.2/8.14.2) with ESMTP id p7IJgLu5097946; Thu, 18 Aug 2011 13:42:21 -0600 (MDT) (envelope-from ken@nargothrond.kdm.org) Received: (from ken@localhost) by nargothrond.kdm.org (8.14.2/8.14.2/Submit) id p7IJgKFb097945; Thu, 18 Aug 2011 13:42:20 -0600 (MDT) (envelope-from ken) Date: Thu, 18 Aug 2011 13:42:20 -0600 From: "Kenneth D. Merry" To: Gregory Wright Message-ID: <20110818194220.GA97929@nargothrond.kdm.org> References: <4E396DDD.9030602@antiope.com> <20110803170210.GA46958@nargothrond.kdm.org> <4E39978A.7070401@antiope.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4E39978A.7070401@antiope.com> User-Agent: Mutt/1.4.2i Cc: freebsd-scsi@freebsd.org Subject: Re: an mps probelm X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 18 Aug 2011 19:42:24 -0000 On Wed, Aug 03, 2011 at 14:46:34 -0400, Gregory Wright wrote: > Hi Ken, > > On 8/3/11 1:02 PM, Kenneth D. Merry wrote: > >On Wed, Aug 03, 2011 at 11:48:45 -0400, Gregory Wright wrote: > >>Hi, > >> > >>I have an LSI SAS 9200-8e hba card. It's connected to a Dell > >>PowerVault 124T autoloader with an LTO4 drive. > >> > >>I installed 9.0-BETA1 yesterday and was able to successfully > >>detect the tape drive (mps driver), but the hba doesn't find the changer. > >>I used camcontrol to force rescanning all luns but that > >>didn't help either. > >Try rescanning the particular LUN for the changer device, like this: > > > >camcontrol rescan 6:4:1 > The changer was found when I used that command. > >(That is assuming the tape drive is at 6:4:0.) > > > >>Since I have just acquired this hardware I installed an OS > >>reported to work with this autoloader/hba combination, > >>ubuntu 11.04 server. On ubuntu, the changer is found: > >> > >>gwright@greenhouse-george:~$ lsscsi -g > >>[0:0:0:0] disk AMCC 9650SE-12M DISK 3.06 /dev/sdb /dev/sg1 > >>[0:0:0:1] disk AMCC 9650SE-12M DISK 3.06 /dev/sdc /dev/sg2 > >>[0:0:1:0] disk AMCC 9650SE-12M DISK 3.06 /dev/sdd /dev/sg3 > >>[1:0:0:0] tape IBM ULTRIUM-TD4 97F0 /dev/st0 /dev/sg5 > >>[1:0:0:1] mediumx DELL PV-124T 0080 /dev/sch0 /dev/sg6 > >>[2:0:0:0] disk ATA ST3160811AS 3.AA /dev/sda /dev/sg0 > >>[6:0:0:0] cd/dvd MITSUMI CD-ROM SR244W T01A /dev/sr0 /dev/sg4 > >> > >>(On ubuntu the driver is mpt2sas.) > >> > >>It seems as if the mps driver is not seeing the additional lun > >>hanging off the bus. > >Yeah, it looks like the path inquiry CCB in the driver is telling CAM not > >to scan LUNs. > > > >>This server is not in production yet so I can re-install 9.0-BETA1 > >>and run more tests, if that would help. > >Try the attached patch, and let me know whether it works. > > > > > The patch works. Now I get > > greenhouse-george# camcontrol devlist > at scbus0 target 0 lun 0 (ada0,pass0) > at scbus4 target 0 lun 0 (cd0,pass1) > at scbus6 target 4 lun 0 (sa0,pass2) > at scbus6 target 4 lun 1 (ch0,pass3) > at scbus7 target 0 lun 0 (da0,pass4) > at scbus7 target 0 lun 1 (da1,pass5) > at scbus7 target 1 lun 0 (da2,pass6) > greenhouse-george# > > I hope the change makes it into BETA2/RC1. Thanks! I checked it into FreeBSD/head today, so it will be in the next release/beta. Thanks, Ken -- Kenneth Merry ken@FreeBSD.ORG