From owner-freebsd-wireless@FreeBSD.ORG Mon Apr 2 11:07:21 2012 Return-Path: Delivered-To: freebsd-wireless@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id ADAC0106566B for ; Mon, 2 Apr 2012 11:07:21 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 9718B8FC12 for ; Mon, 2 Apr 2012 11:07:21 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q32B7L9W046972 for ; Mon, 2 Apr 2012 11:07:21 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q32B7KET046970 for freebsd-wireless@FreeBSD.org; Mon, 2 Apr 2012 11:07:20 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 2 Apr 2012 11:07:20 GMT Message-Id: <201204021107.q32B7KET046970@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-wireless@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-wireless@FreeBSD.org X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 02 Apr 2012 11:07:21 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/166357 wireless [ath] 802.11n TX stall when the first _AND_ last frame o kern/166286 wireless [net80211] [ath] initial switch to HT40 isn't causing o kern/166190 wireless [ath] TX hangs and frames stuck in TX queue o kern/166086 wireless [Patch][ath] Reflect state of rfkill switch in a sysct o kern/165969 wireless [ath] Slower performance in adhoc mode vs Client/AP mo o kern/165966 wireless [ath] ath0: device timeout on SMP machines due to race o kern/165895 wireless [ath] overly busy cabq can tie up all tx buffers o kern/165870 wireless [bwn] bwn driver does not attach on HP Pavilion dv9420 o kern/165866 wireless [ath] TX hangs, requiring a "scan" to properly reset t o kern/165849 wireless [ath] [hang] network ath driver freeze o kern/165595 wireless [ipw] ipw(4): Can't load firmare for ipw2200bg o kern/165543 wireless [ath] ath0 endless scanning of channels without connec o kern/165517 wireless [net80211] bgscan isn't triggered when invalid beacons o kern/165475 wireless [ath] operational mode change doesn't poke the underly o kern/165382 wireless [kernel] taskqueue_unblock doesn't unblock currently q o kern/165306 wireless [ath] race conditions between scanning and beacon time o kern/165220 wireless [ath] "ath_rx_tasklet: sc_inreset_cnt > 0; skipping" m o kern/165214 wireless [ieee80211] Kernel panic in ieee80211_output.c:2505 o kern/165212 wireless [ath] No WiFi on Acer Aspire One 751h (Atheros AR5BHB6 o kern/165149 wireless [ath] [net80211] Ping with data length more than iv_fr o kern/165146 wireless [net80211] Net802.11 Fragment number is assigned 1 (sh o kern/165060 wireless [ath] vap->iv_bss race conditions causing crashes insi o kern/165021 wireless [ath] ath device timeout during scan/attach, if wlan_c o kern/164721 wireless [ath] ath device timeouts o kern/164499 wireless [wi] [patch] if_wi needs fix for big endian architectu o kern/164382 wireless [ath] crash when down/deleting a vap - inside ieee8021 o kern/164365 wireless [iwi] iwi0: UP/DOWN in o bin/164102 wireless hostapd not configured for 802.11n o kern/163759 wireless [ath] ath(4) "stops working" in hostap mode o kern/163724 wireless [mwl] [patch] NULL check before dereference o kern/163719 wireless [ath] ath interface do not receive multicast o kern/163689 wireless [ath] TX timeouts when sending probe/mgmt frames durin o kern/163574 wireless [net80211] overly-frequent HT occupancy changes o kern/163573 wireless [ath] hostap mode TX buffer hang o kern/163559 wireless [ath] kernel panic AH_DEBUG o kern/163318 wireless [ath] ath(4) stops working p kern/163312 wireless [panic] [ath driver] kernel panic: page fault with ath o kern/163237 wireless [ath] AR5416 as HostAP. Delays among clients when a cl o kern/163082 wireless [ath] ar9285 diversity fixes o kern/162648 wireless [ath] AR9227 ADC DC calibration failure o kern/162647 wireless [ath] 11n TX aggregation session / TX hang o kern/161293 wireless [iwn] hang at startup when starting network o kern/161035 wireless [ieee80211] Incorrect number describing 11ng MCS rate o kern/160391 wireless [ieee80211] [patch] Panic in mesh mode o kern/160296 wireless [zyd] [panic] 802.11 usb device reboots system on 'ifc o misc/160176 wireless [mips] [panic] Kernel panic on AR7161 platform with AR o kern/157449 wireless [ath] MAC address conflict causes system to freeze o kern/157243 wireless [ath] investigate beacon TX (AP) / RX (STA) when under o kern/156904 wireless [ath] AR9285 antenna diversity algorithm is buggy and o kern/156884 wireless [ath] ath instablity o kern/156327 wireless [bwn] bwn driver causes 20%-50% packet loss o kern/156322 wireless [wpi] no ahdemo support for if_wpi o kern/156321 wireless [ath] ahdemo doesn't work with if_ath o kern/155498 wireless [ral] ral(4) needs to be resynced with OpenBSD's to ga o kern/155100 wireless [ath] ath driver on busy channel: "stuck beacon" p kern/154598 wireless [ath] Atheros 5424/2424 can't connect to WPA network o kern/154567 wireless [ath] ath(4) lot of bad series(0) o kern/154327 wireless [ath] AR5416 in station mode hangs when transmitting f o kern/154284 wireless [ath] Modern ath wifi cards (such as AR9285) have miss o kern/154153 wireless [ath] AR5213 + MIPS + WPA group key packet corruption o kern/153448 wireless [ath] ath networking device loses association after a o kern/152750 wireless [ath] ath0 lot of bad series hwrate o kern/151198 wireless [ath] ath/5416 fails bgscan with "ath0: ath_chan_set: o kern/149786 wireless [bwn] bwn on Dell Inspiron 1150: connections stall o kern/149516 wireless [ath] ath(4) hostap with fake MAC/BSSID results in sta o kern/149373 wireless [realtek/atheros]: None of my network card working o kern/148322 wireless [ath] Triggering atheros wifi beacon misses in hostap o kern/148317 wireless [ath] FreeBSD 7.x hostap memory leak in net80211 or At o kern/148078 wireless [ath] wireless networking stops functioning o kern/145826 wireless [panic] [ath] Unable to configure adhoc mode on ath0/w o kern/144987 wireless [wpi] [panic] injecting packets with wlaninject using o bin/144109 wireless hostapd(8) uses the MAC of the wireless interface, but o conf/143079 wireless hostapd(8) startup missing multi wlan functionality p kern/140567 wireless [ath] [patch] ath is not worked on my notebook PC o kern/140245 wireless [ath] [panic] Kernel panic during network activity on o kern/137592 wireless [ath] panic - 7-STABLE (Aug 7, 2009 UTC) crashes on ne p bin/137484 wireless [patch] Integer overflow in wpa_supplicant(8) base64 e o kern/136943 wireless [wpi] [lor] wpi0_com_lock / wpi0 o kern/136836 wireless [ath] atheros card stops functioning after about 12 ho o kern/132722 wireless [ath] Wifi ath0 associates fine with AP, but DHCP or I o bin/131549 wireless ifconfig(8) can't clear 'monitor' mode on the wireless o kern/126475 wireless [ath] [panic] ath pcmcia card inevitably panics under o kern/125721 wireless [ath] Terrible throughput/high ping latency with Ubiqu o kern/125617 wireless [ath] [panic] ath(4) related panic o kern/125501 wireless [ath] atheros cardbus driver hangs o kern/125332 wireless [ath] [panic] crash under any non-tiny networking unde o kern/124767 wireless [iwi] Wireless connection using iwi0 driver (Intel 220 o kern/124753 wireless [ieee80211] net80211 discards power-save queue packets o docs/120456 wireless ath(4) needs to specify requirement on wlan_scan_sta o kern/119513 wireless [ath] [irq] inserting dlink dwl-g630 wireless card res o kern/116747 wireless [ndis] FreeBSD 7.0-CURRENT crash with Dell TrueMobile f kern/105348 wireless [ath] ath device stopps TX 92 problems total. From owner-freebsd-wireless@FreeBSD.ORG Mon Apr 2 16:39:17 2012 Return-Path: Delivered-To: freebsd-wireless@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 728AB106566C; Mon, 2 Apr 2012 16:39:17 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 462818FC0A; Mon, 2 Apr 2012 16:39:17 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q32GdHg1058199; Mon, 2 Apr 2012 16:39:17 GMT (envelope-from adrian@freefall.freebsd.org) Received: (from adrian@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q32GdHFN058195; Mon, 2 Apr 2012 16:39:17 GMT (envelope-from adrian) Date: Mon, 2 Apr 2012 16:39:17 GMT Message-Id: <201204021639.q32GdHFN058195@freefall.freebsd.org> To: adrian@FreeBSD.org, adrian@FreeBSD.org, freebsd-wireless@FreeBSD.org From: adrian@FreeBSD.org Cc: Subject: Re: kern/166357: [ath] 802.11n TX stall when the first frame in the BAW is in the software queue X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 02 Apr 2012 16:39:17 -0000 Old Synopsis: [ath] 802.11n TX stall when the first _AND_ last frame in the BAW is in the software queue New Synopsis: [ath] 802.11n TX stall when the first frame in the BAW is in the software queue State-Changed-From-To: open->patched State-Changed-By: adrian State-Changed-When: Mon Apr 2 16:38:30 UTC 2012 State-Changed-Why: Fix http://www.freebsd.org/cgi/query-pr.cgi?pr=166357 From owner-freebsd-wireless@FreeBSD.ORG Mon Apr 2 16:39:58 2012 Return-Path: Delivered-To: freebsd-wireless@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6984C1065882; Mon, 2 Apr 2012 16:39:58 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 3E06A8FC17; Mon, 2 Apr 2012 16:39:58 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q32GdwYA058251; Mon, 2 Apr 2012 16:39:58 GMT (envelope-from adrian@freefall.freebsd.org) Received: (from adrian@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q32GdwHA058247; Mon, 2 Apr 2012 16:39:58 GMT (envelope-from adrian) Date: Mon, 2 Apr 2012 16:39:58 GMT Message-Id: <201204021639.q32GdwHA058247@freefall.freebsd.org> To: adrian@FreeBSD.org, adrian@FreeBSD.org, freebsd-wireless@FreeBSD.org From: adrian@FreeBSD.org Cc: Subject: Re: kern/166190: [ath] TX hangs and frames stuck in TX queue X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 02 Apr 2012 16:39:58 -0000 Synopsis: [ath] TX hangs and frames stuck in TX queue State-Changed-From-To: open->patched State-Changed-By: adrian State-Changed-When: Mon Apr 2 16:39:24 UTC 2012 State-Changed-Why: Fix http://www.freebsd.org/cgi/query-pr.cgi?pr=166190 From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 11:12:57 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 61AE7106566B for ; Tue, 3 Apr 2012 11:12:57 +0000 (UTC) (envelope-from iwasaki@jp.FreeBSD.org) Received: from locore.org (ns01.locore.org [218.45.21.227]) by mx1.freebsd.org (Postfix) with ESMTP id EF9B78FC14 for ; Tue, 3 Apr 2012 11:12:56 +0000 (UTC) Received: from localhost (celeron.v4.locore.org [192.168.0.10]) by locore.org (8.14.5/8.14.5/iwasaki) with ESMTP/inet id q33B3VoX068325 for ; Tue, 3 Apr 2012 20:03:31 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Date: Tue, 03 Apr 2012 20:03:27 +0900 (JST) Message-Id: <20120403.200327.18305192.iwasaki@jp.FreeBSD.org> To: freebsd-wireless@freebsd.org From: Mitsuru IWASAKI X-Mailer: Mew version 3.3 on Emacs 20.7 / Mule 4.0 (HANANOEN) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 11:12:57 -0000 Hi, Suspend/Resume problem was solved (thanks bschmidt!), however problem still remainds after watchdog messages like `device timeout' or `firmware stuck in state 4, resetting'. I've made patches against not only iwi(4) but also net8011 code and tested for few days; http://people.freebsd.org/~iwasaki/iwi/iwi-20120403.diff Please review the patches, Thanks! From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 11:37:01 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8967F106566C for ; Tue, 3 Apr 2012 11:37:01 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-lpp01m010-f54.google.com (mail-lpp01m010-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id 004F38FC0C for ; Tue, 3 Apr 2012 11:37:00 +0000 (UTC) Received: by lagv3 with SMTP id v3so6321755lag.13 for ; Tue, 03 Apr 2012 04:36:59 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:sender:x-originating-ip:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :x-gm-message-state; bh=ICpJK8+B7PKKPfM5VspYhVyfczuv2MDMl/mv/TRJEeU=; b=H48v4bW0wlqdPcWcWygzIkHfvjTsVcc36CdTpOkVaOKCZm2ouGs+v5VeBr4XQwkt6L SFnZjnKObIj462k6Nq6wvMFpU1sGCqhOUTD4ss+hNUs5Z/wwLRyaWwXLL1aMiKSg6O8E SeKToHcUDVGE73dICz/5leW6FYuQVPBm7q9UVnaorsFOyJ0jda0lUZRokGtwzj7myYh6 Be0pUPoKj064oZl2klkL1U+k45ekTHId5WISCyz+DvSbi7pkBRkRlPWNWpI3kjVxYmwI n2j+/S3MQ/3mfz5IbXKWZCQURH1fJ9vUPDwJ55hhuUt7f/TWrw5yT/3mfj05rvr6rklQ TWHg== MIME-Version: 1.0 Received: by 10.152.104.43 with SMTP id gb11mr13729772lab.8.1333453019604; Tue, 03 Apr 2012 04:36:59 -0700 (PDT) Sender: bschmidt@techwires.net Received: by 10.152.112.38 with HTTP; Tue, 3 Apr 2012 04:36:59 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: <20120403.200327.18305192.iwasaki@jp.FreeBSD.org> References: <20120403.200327.18305192.iwasaki@jp.FreeBSD.org> Date: Tue, 3 Apr 2012 13:36:59 +0200 X-Google-Sender-Auth: FniK3ZbcpEpZp-aTMsL3O0Okk8I Message-ID: From: Bernhard Schmidt To: Mitsuru IWASAKI Content-Type: text/plain; charset=ISO-8859-1 X-Gm-Message-State: ALoCoQnZV59Xt4le/QL6seav343Bbmw8IaHUYadyvUbF16ka5PQxBctFPsppIROOQuoBs5nltHyS Cc: freebsd-wireless@freebsd.org Subject: Re: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 11:37:01 -0000 On Tue, Apr 3, 2012 at 13:03, Mitsuru IWASAKI wrote: > Hi, > > Suspend/Resume problem was solved (thanks bschmidt!), > however problem still remainds after watchdog messages like > `device timeout' or `firmware stuck in state 4, resetting'. Honestly, I'd rather see the above issues fixed and not the workaround for it. ;) Do you have a test case to reproduce this? > I've made patches against not only iwi(4) but also net8011 code > and tested for few days; > http://people.freebsd.org/~iwasaki/iwi/iwi-20120403.diff > > Please review the patches, Thanks! So, if I get that correctly, the only difference is that you added a ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1); call, right? Any reason why not calling ieee80211_stop_all()/ieee80211_start_all() directly in iwi_restart()? This will call the appropriate iwi_init/stop functions. -- Bernhard From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 12:12:17 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0CD48106564A; Tue, 3 Apr 2012 12:12:17 +0000 (UTC) (envelope-from iwasaki@jp.FreeBSD.org) Received: from locore.org (ns01.locore.org [218.45.21.227]) by mx1.freebsd.org (Postfix) with ESMTP id AEC498FC0C; Tue, 3 Apr 2012 12:12:16 +0000 (UTC) Received: from localhost (celeron.v4.locore.org [192.168.0.10]) by locore.org (8.14.5/8.14.5/iwasaki) with ESMTP/inet id q33CCFFf068596; Tue, 3 Apr 2012 21:12:15 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Date: Tue, 03 Apr 2012 21:12:12 +0900 (JST) Message-Id: <20120403.211212.59463568.iwasaki@jp.FreeBSD.org> To: bschmidt@freebsd.org From: Mitsuru IWASAKI In-Reply-To: References: <20120403.200327.18305192.iwasaki@jp.FreeBSD.org> X-Mailer: Mew version 3.3 on Emacs 20.7 / Mule 4.0 (HANANOEN) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-wireless@freebsd.org Subject: Re: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 12:12:17 -0000 Hi, > > Suspend/Resume problem was solved (thanks bschmidt!), > > however problem still remainds after watchdog messages like > > `device timeout' or `firmware stuck in state 4, resetting'. > > Honestly, I'd rather see the above issues fixed and not the workaround > for it. ;) > Do you have a test case to reproduce this? Yap, ifconfig wlan0 scan on RELENG_8 always reproduce 'firmware stuck in state 4, resetting'. > So, if I get that correctly, the only difference is that you added a > ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1); call, right? > Any reason why not calling ieee80211_stop_all()/ieee80211_start_all() > directly in iwi_restart()? This will call the appropriate > iwi_init/stop functions. Yes, I already tried that, wlan0 seems restarted but iwi0 not. ifconfig show the status like this; iwi0: flags=8842 metric 0 mtu 2290 [snip] wlan0: flags=8803 metric 0 mtu 1500 [snip] I wonder if only RELENG_8 has this problem because HEAD and RELENG_9 seems to be OK... From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 12:38:22 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 5A3FC1065670 for ; Tue, 3 Apr 2012 12:38:22 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-bk0-f54.google.com (mail-bk0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id D582C8FC14 for ; Tue, 3 Apr 2012 12:38:21 +0000 (UTC) Received: by bkcjc3 with SMTP id jc3so4165189bkc.13 for ; Tue, 03 Apr 2012 05:38:21 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:sender:x-originating-ip:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :x-gm-message-state; bh=reZHimnHpEhlzS8a748Dbc5bmSEiaTTlPgkto93dh90=; b=Z60TDki3WicA7sRGiYgHdMxu31IYeu99k5PANDupwFs61K0rYImgg9MYhh1eBc3Qys v5t+4IPZj8SxsJCJfk0Scrc+d5U82VYGpgwxVMU078iomlK9bvyslp41ITP2aULGpCgj 0Dvhgo1GBusTPoE590cCX0w6fhIBlEiFbd99O32QzcJyuh8w7tcZdt7NSDqQgPL0ZP+s +JlkcKdEaLiGZzDXRADTHBHvT2FbaFlkh3qvolL81lmDlNxV/dRSC+3WgHthKn29SSwG b6nzFE8rNw1D2tXK2tIkWOqyL/unYmyWEySG4l/+0VarsLFqH0pHOfyXGYCvv+KZO4QE cnEg== MIME-Version: 1.0 Received: by 10.152.133.9 with SMTP id oy9mr13829918lab.43.1333456700833; Tue, 03 Apr 2012 05:38:20 -0700 (PDT) Sender: bschmidt@techwires.net Received: by 10.152.112.38 with HTTP; Tue, 3 Apr 2012 05:38:20 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: <20120403.211212.59463568.iwasaki@jp.FreeBSD.org> References: <20120403.200327.18305192.iwasaki@jp.FreeBSD.org> <20120403.211212.59463568.iwasaki@jp.FreeBSD.org> Date: Tue, 3 Apr 2012 14:38:20 +0200 X-Google-Sender-Auth: 3szBMy0No7GX8PSJnr63B_rgilg Message-ID: From: Bernhard Schmidt To: Mitsuru IWASAKI Content-Type: text/plain; charset=ISO-8859-1 X-Gm-Message-State: ALoCoQlSubSa1S2gFG5ZY0T/2uWrwjuaGGr2SaDkQ20wEqlv1FC8jDn+IeMZ3nX6zKSqz5vVQQar Cc: freebsd-wireless@freebsd.org Subject: Re: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 12:38:22 -0000 On Tue, Apr 3, 2012 at 14:12, Mitsuru IWASAKI wrote: > Hi, >> > Suspend/Resume problem was solved (thanks bschmidt!), >> > however problem still remainds after watchdog messages like >> > `device timeout' or `firmware stuck in state 4, resetting'. >> >> Honestly, I'd rather see the above issues fixed and not the workaround >> for it. ;) >> Do you have a test case to reproduce this? > > Yap, ifconfig wlan0 scan on RELENG_8 always reproduce 'firmware stuck > in state 4, resetting'. Ah, yeah, ok, the scan issue again, that is probably the reason why background scan support is disabled.. >> So, if I get that correctly, the only difference is that you added a >> ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1); call, right? >> Any reason why not calling ieee80211_stop_all()/ieee80211_start_all() >> directly in iwi_restart()? This will call the appropriate >> iwi_init/stop functions. > > Yes, I already tried that, wlan0 seems restarted but iwi0 not. > ifconfig show the status like this; > iwi0: flags=8842 metric 0 mtu 2290 > [snip] > wlan0: flags=8803 metric 0 mtu 1500 > [snip] > > I wonder if only RELENG_8 has this problem because HEAD and RELENG_9 > seems to be OK... wpa_supplicant involved? I mean, that is the only thing I can currently think of, wpa_supplicant versions differ between head and 8 afaik. The callgraph is also different between with and without supplicant. Can we rule the supplicant out somehow? I mean this condition in ieee80211_start_locked() if ((parent->if_drv_flags & IFF_DRV_RUNNING) && vap->iv_roaming != IEEE80211_ROAMING_MANUAL) { -- Bernhard From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 13:12:49 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4AFB7106566B; Tue, 3 Apr 2012 13:12:49 +0000 (UTC) (envelope-from iwasaki@jp.FreeBSD.org) Received: from locore.org (ns01.locore.org [218.45.21.227]) by mx1.freebsd.org (Postfix) with ESMTP id EEA7F8FC16; Tue, 3 Apr 2012 13:12:48 +0000 (UTC) Received: from localhost (celeron.v4.locore.org [192.168.0.10]) by locore.org (8.14.5/8.14.5/iwasaki) with ESMTP/inet id q33DClDB068854; Tue, 3 Apr 2012 22:12:47 +0900 (JST) (envelope-from iwasaki@jp.FreeBSD.org) Date: Tue, 03 Apr 2012 22:12:45 +0900 (JST) Message-Id: <20120403.221245.92588443.iwasaki@jp.FreeBSD.org> To: bschmidt@freebsd.org From: Mitsuru IWASAKI In-Reply-To: References: <20120403.211212.59463568.iwasaki@jp.FreeBSD.org> X-Mailer: Mew version 3.3 on Emacs 20.7 / Mule 4.0 (HANANOEN) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-wireless@freebsd.org Subject: Re: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 13:12:49 -0000 Hi, > > Yap, ifconfig wlan0 scan on RELENG_8 always reproduce 'firmware stuck > > in state 4, resetting'. > > Ah, yeah, ok, the scan issue again, that is probably the reason why > background scan support is disabled.. Yes it seems to be. On the other hand, the `device timeout' was produced when a microwave oven is operating, but it occurs rarely and difficult to debug. I could see `device timeout' on only RELENG_8... > > I wonder if only RELENG_8 has this problem because HEAD and RELENG_9 > > seems to be OK... > > wpa_supplicant involved? I mean, that is the only thing I can Yes, I'm using wpa_supplicant. > currently think of, wpa_supplicant versions differ between head and 8 > afaik. The callgraph is also different between with and without > supplicant. Can we rule the supplicant out somehow? > > I mean this condition in ieee80211_start_locked() > if ((parent->if_drv_flags & IFF_DRV_RUNNING) && > vap->iv_roaming != IEEE80211_ROAMING_MANUAL) { Hmm, I can't get this. wpa_supplicant on HEAD and RELENG_9 also set roaming mode MANUAL, isn't it? Thanks! From owner-freebsd-wireless@FreeBSD.ORG Tue Apr 3 13:28:39 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 73A19106564A for ; Tue, 3 Apr 2012 13:28:39 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-lpp01m010-f54.google.com (mail-lpp01m010-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id DDB158FC0C for ; Tue, 3 Apr 2012 13:28:38 +0000 (UTC) Received: by lagv3 with SMTP id v3so6489655lag.13 for ; Tue, 03 Apr 2012 06:28:37 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:sender:x-originating-ip:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding:x-gm-message-state; bh=SKMZ4lP+XG8i7EtCdFFr4kBVh178BNzCX/x6ovGu8NM=; b=YgNrBHkcteJbuYfD/58fSLgQ6Wbarqn8OdcT6+FJNuvK7tWoQjGKTpRbdq87rQGgVq M76/uY/617MK5DO+c1LX0csAnYnfJAZNvRAMtxZP2J5Mc68mdePpZUPz9YI2CtrGAAC3 BUUB5m8u9VMqFB6pvEsSQ6zuSaK6ym31dwf0spmRSpSUU4hTTWMKRCADxCz+nzj7gapg KU80JfsSScy+wvqjmcVwuJ3ltYDyG/CthoqZbCRbjzerLsEKHmr2FyE0P7Q6fhLqsW/5 yDG63idQy/tHjVmPMJv5gSvfK6zK2vwPMDuQb8DUsFDIA2qnKgkVynONNBBHRg2uZi6W 3zNg== MIME-Version: 1.0 Received: by 10.152.130.167 with SMTP id of7mr14045318lab.36.1333459717804; Tue, 03 Apr 2012 06:28:37 -0700 (PDT) Sender: bschmidt@techwires.net Received: by 10.152.112.38 with HTTP; Tue, 3 Apr 2012 06:28:37 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: <20120403.221245.92588443.iwasaki@jp.FreeBSD.org> References: <20120403.211212.59463568.iwasaki@jp.FreeBSD.org> <20120403.221245.92588443.iwasaki@jp.FreeBSD.org> Date: Tue, 3 Apr 2012 15:28:37 +0200 X-Google-Sender-Auth: kEPVY457hmlCYEjhXOIOEVe5ChE Message-ID: From: Bernhard Schmidt To: Mitsuru IWASAKI Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable X-Gm-Message-State: ALoCoQnGNr9YCghpyvWz1hnNGt1gBB1NquhY4zzGEQaM2zAjz7LaKaRr54DCgwct2v9vXE8jTt7L Cc: freebsd-wireless@freebsd.org Subject: Re: [patch] iwi(4) watchdog broken X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2012 13:28:39 -0000 On Tue, Apr 3, 2012 at 15:12, Mitsuru IWASAKI wrot= e: > Hi, > >> > Yap, ifconfig wlan0 scan on RELENG_8 always reproduce 'firmware stuck >> > in state 4, resetting'. >> >> Ah, yeah, ok, the scan issue again, that is probably the reason why >> background scan support is disabled.. > > Yes it seems to be. =A0On the other hand, the `device timeout' was > produced when a microwave oven is operating, but it occurs rarely > and difficult to debug. =A0I could see `device timeout' on only RELENG_8.= .. > > >> > I wonder if only RELENG_8 has this problem because HEAD and RELENG_9 >> > seems to be OK... >> >> wpa_supplicant involved? I mean, that is the only thing I can > > Yes, I'm using wpa_supplicant. > >> currently think of, wpa_supplicant versions differ between head and 8 >> afaik. The callgraph is also different between with and without >> supplicant. Can we rule the supplicant out somehow? >> >> I mean this condition in ieee80211_start_locked() >> =A0 =A0 =A0 =A0 if ((parent->if_drv_flags & IFF_DRV_RUNNING) && >> =A0 =A0 =A0 =A0 =A0 =A0 vap->iv_roaming !=3D IEEE80211_ROAMING_MANUAL) { > > Hmm, I can't get this. wpa_supplicant on HEAD and RELENG_9 also set > roaming mode MANUAL, isn't it? Sure, just wanted to emphasize that it's up to wpa_supplicant to do the UP/DOWN. And afaik between head and 8 the driver_freebsd.c file is different. --=20 Bernhard From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 01:41:38 2012 Return-Path: Delivered-To: freebsd-wireless@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 3ED41106564A; Thu, 5 Apr 2012 01:41:38 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 1156F8FC0C; Thu, 5 Apr 2012 01:41:38 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q351fbgm005202; Thu, 5 Apr 2012 01:41:37 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q351fbNE005198; Thu, 5 Apr 2012 01:41:37 GMT (envelope-from linimon) Date: Thu, 5 Apr 2012 01:41:37 GMT Message-Id: <201204050141.q351fbNE005198@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-wireless@FreeBSD.org From: linimon@FreeBSD.org Cc: Subject: Re: kern/166641: [ieee80211] [patch] mbuf/cluster leak in AP mode in 802.11 power saving support X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 01:41:38 -0000 Old Synopsis: mbuf/cluster leak in AP mode in 802.11 power saving support New Synopsis: [ieee80211] [patch] mbuf/cluster leak in AP mode in 802.11 power saving support Responsible-Changed-From-To: freebsd-bugs->freebsd-wireless Responsible-Changed-By: linimon Responsible-Changed-When: Thu Apr 5 01:40:39 UTC 2012 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=166641 From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 01:42:05 2012 Return-Path: Delivered-To: freebsd-wireless@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 51E3B10656D1; Thu, 5 Apr 2012 01:42:05 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 24D918FC16; Thu, 5 Apr 2012 01:42:05 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q351g5Ms005255; Thu, 5 Apr 2012 01:42:05 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q351g5eb005251; Thu, 5 Apr 2012 01:42:05 GMT (envelope-from linimon) Date: Thu, 5 Apr 2012 01:42:05 GMT Message-Id: <201204050142.q351g5eb005251@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-wireless@FreeBSD.org From: linimon@FreeBSD.org Cc: Subject: Re: kern/166642: [ieee80211] [patch] in 802.11n mode for FreeBSD AP, having a station in powersave cripples AP TX. X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 01:42:05 -0000 Old Synopsis: in 802.11n mode for FreeBSD AP, having a station in powersave cripples AP TX. New Synopsis: [ieee80211] [patch] in 802.11n mode for FreeBSD AP, having a station in powersave cripples AP TX. Responsible-Changed-From-To: freebsd-bugs->freebsd-wireless Responsible-Changed-By: linimon Responsible-Changed-When: Thu Apr 5 01:41:46 UTC 2012 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=166642 From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 03:57:44 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 70D83106566C for ; Thu, 5 Apr 2012 03:57:44 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pz0-f44.google.com (mail-pz0-f44.google.com [209.85.210.44]) by mx1.freebsd.org (Postfix) with ESMTP id 3E2648FC1D for ; Thu, 5 Apr 2012 03:57:43 +0000 (UTC) Received: by dadz14 with SMTP id z14so3951198dad.17 for ; Wed, 04 Apr 2012 20:57:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:to:reply-to:subject:in-reply-to:x-mailer :mime-version:content-type; bh=YmqU/RvAMCZbCCl0yOZ03ERGL6h0SQAt/y3qrc/Aj6o=; b=v/rrVf3fuQCPZVnuqidZhfSCEP4FDqyXQiDtcPUJfOUpsXjsj7tRH/BHK6/G+V6j7E Z8PDdC/KqZxlPgttQe1OJJ0vW6DCUoRb4LlF8K63zpL9bnMywhoQEUBIPrZcnB00u9mC EmKz4aEbSsWlgjnJAaPVAjIpAyDbNQOuquOjRP1qO+IRzxZlZ4jbNjuldu52uxzp9E1K RP2ytzK1nsVSSk+xcoQc5BkqV6r12kwp8SnHUArUMJTsGmWvrWNVwqXeEN5YwfTk3Dj9 et07RalDKqlX+VwTqJq0ibqcKP+yfvp0BsLAVQBt8Ojk74Xgl+HCgaqM9GjHwrfvlWYr TmVQ== Received: by 10.68.135.38 with SMTP id pp6mr3265530pbb.82.1333598263745; Wed, 04 Apr 2012 20:57:43 -0700 (PDT) Received: from www.palm.com ([32.157.192.154]) by mx.google.com with ESMTPS id r6sm2039435pbc.40.2012.04.04.20.57.33 (version=SSLv3 cipher=OTHER); Wed, 04 Apr 2012 20:57:42 -0700 (PDT) Message-ID: <4f7d1836.c60e440a.6b03.ffff85a9@mx.google.com> Date: Wed, 4 Apr 2012 20:57:24 -0700 From: "Adrian Chadd" To: "Peter Lazar" , "freebsd-wireless@freebsd.org" In-Reply-To: <20120404213548.GA3291@pgl-P5K-E> X-Mailer: Palm webOS v1.0.1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: wi driver X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Adrian Chadd List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 03:57:44 -0000 The trouble is that different cards and different versions of firmware supp= ort different things. Some changes were committed a few years ago to suppor= t raw frame TX and Rx which likely worked for one specific card/firmware co= mbo but not all. Certainly not the old firmware cards I have. I'm thinking of ripping that code out and making it optional and dependent= upon firmware checks. But more changes are needed- the current wi driver= does the MLME in net80211 which we can't unconditionally do. Adrian Sent from my Palm Pre on AT&T On Apr 4, 2012 2:35 PM, Peter Lazar <pgl@bok.net> wrote:=20 I run one more test using U.S. Robotics PCMCIA phone-line modem card, to check whether maybe PCMCIA driver is broken in 8.0livefs: modem appears to work okay. My urge for a wi driver on freebsd 8.0 (and beyond) faded (I am getting an iPad), but if you wish we can meet and take a crack at it: I have one t42 laptop with freebsd 8.2 that we can use. Regards, Peter On Wed, Mar 28, 2012 at 06:24:33PM -0700, Peter Lazar wrote: > On Tue, Feb 07, 2012 at 03:33:38PM -0800, Adrian Chadd wrote: > > Ok. How about say, Tuesday next week? > >=20 > >=20 > > Adrian > >=20 > > On 7 February 2012 15:29, Peter Lazar <pgl@bok.net> wrote: > > > On Tue, Feb 07, 2012 at 01:48:20PM -0800, Adrian Chadd wrote: > > >> If we can find another working T42 or similar, we could= just spend a > > >> weekend trying to make things work? > > > > > > I have an extra hard disk that I can pop in, > > > but let me try the live 8.0 cd first. > > > > > > -- p >=20 > I ran a total of eight tests: > (ibm t42 + dell inspiron 6000) * (Lucent Orinoco + Senao 2511) > * (7.4 live + 8.0 live). >=20 > I attach in this email my notes; > please observe the (sporadic, imho) "bfe0: link state changed to DOWN"= message). >=20 > Regards, >=20 > Peter >=20 > ----- > 1. > 7.4 livefs > ibm t42 laptop > Lucent WaveLAN/IEEE (Orinoco) PCMCIA card >=20 > # card is inserted, log output is > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x4000-0x403f ir= q 11 function 0 config 1 on pccard0 > wi0: [ITHREAD] > wi0: using Lucent Technologies, WaveLAN/IEEE > wi0: Lucent Firmware: Station (7.28.1) > wi0: Ethernet address: 00:02:2d:40:67:00 >=20 > # setting the wireless card > ifconfig wi0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890 up > mkdir /var/db > dhclient wi0 >=20 > # "netstat -nr" and "ifconfig wi0" give expected output, > # wi0 driver appears to work as expected. >=20 > ----- > 2. > 8.0 livefs > ibm t42 laptop > Lucent WaveLAN/IEEE (Orinoco) PCMCIA card >=20 > # card is inserted, log output is > interrupt storm detected on "irq11:"; throttling interrupt source > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq1= 1 function 0 config 1 on pccard0 > wi0: [ITHREAD] >=20 > ifconfig wlan0 create wlandev wi0 > # log output is > wlan0: Ethernet address: 00:02:2d:40:67:00 >=20 > ifconfig wlan0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890= up > # relevant ifconfig output is > wi0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric= 0 mtu 2290 > ether ..... > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b > status: associated > wlan0: flags=3D8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST&= gt; metric 0 mtu 1500 > ether ... > inet6 ... > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid colnago channel 10 (2457 Mhz 11b) > ifconfig: missing or corrupted regdomain database >=20 > # ejecting card > # log output > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: detached >=20 > ----- > 3. > 7.4 livefs > dell inspiron 6000 laptop > Lucent WaveLAN/IEEE (Orinoco) PCMCIA card >=20 > # card is inserted, log output is > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq= 19 function 0 config 1 on pccard0 > wi0: [ITHREAD] > wi0: using Lucent Technologies, WaveLAN/IEEE > wi0: Lucent Firmware: Station (7.28.1) > wi0: Ethernet address: 00:02:2d:40:67:00 >=20 > # setting the wireless card > ifconfig wi0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890 up > mkdir /var/db > dhclient wi0 >=20 > # "netstat -nr" and "ifconfig wi0" give expected output, > # wi0 driver appears to work as expected. >=20 > ----- > 4. > 8.0 livefs > dell inspiron 6000 laptop > Lucent WaveLAN/IEEE (Orinoco) PCMCIA card >=20 > # card is inserted, log output is > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq= 19 function 0 config 1 on pccard0 > wi0: [ITHREAD] >=20 > # setting the wireless card > ifconfig wlan0 create wlandev wi0 > # log output is > bfe0: link state changed to DOWN > wlan0: Ethernet address: 00:02:2d:40:67:00 > # relevant ifconfig output is > wi0: flags=3D8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST>= ; metric 0 mtu 1500 > ether ..... > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: associated > wlan0: flags=3D8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST&= gt; metric 0 mtu 1500 > ether ... > inet6 ... > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid colnago channel 10 (2457 Mhz 11b) > # I issued "ifconfig" command several times, and each time a different= channel number is displayed: 11,2,5,9,... > mkdir /var/db > dhclient wlan0 > # output to term is > wlan0: no link ............ giving up > Fixit# >=20 > # I removed the card > # term output is > ifconfig: missing or corrupted regdomain database > # log output is > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id fc03 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc00 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc00 > wi0: detached >=20 > ----- > 5. > 7.4 livefs > ibm t42 laptop > Senao 2511CD Plus >=20 > # card is inserted, log output is > wi0: <INTERSIL HFA384x/IEEE> at port 0x4000-0x403f irq 11 functi= on 0 config 1 on pccard0 > wi0: [ITHREAD] > wi0: using RF:PRISM2.5 MAC:ISL3873 > wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) > wi0: Ethernet address: 00:02:6f:... >=20 > # setting the wireless card > ifconfig wi0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890 up > mkdir /var/db > dhclient wi0 >=20 > # "netstat -nr" and "ifconfig wi0" give expected output, > # wi0 driver appears to work as expected. >=20 > ----- > 6. > 8.0 livefs > ibm t42 laptop > Senao 2511CD Plus >=20 > # card is inserted, log output is > interrupt storm detected on "irq11:"; throttling interrupt source > wi0: <INTERSIL HFA384x/IEEE> at port 0x100-0x13f irq11 function= 0 config 1 on pccard0 > wi0: [ITHREAD] >=20 > ifconfig wlan0 create wlandev wi0 > # log output is > wlan0: Ethernet address: 00:02:2d:40:67:00 >=20 > ifconfig wlan0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890= up > # relevant ifconfig output is > wi0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric= 0 mtu 2290 > ether ..... > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b > status: associated > wlan0: flags=3D8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST&= gt; metric 0 mtu 1500 > ether ... > inet6 ... > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid colnago channel 10 (2457 Mhz 11b) > ifconfig: missing or corrupted regdomain database >=20 > # ejecting card > # log output > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc00 > wi0: wi_seek_bap_ timeout, id fc80 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc80 > wi0: detached >=20 > ----- > 7. > 7.4 livefs > dell inspiron 6000 laptop > Senao 2511CD Plus >=20 > # card is inserted, log output is > wi0: <INTERSIL HFA384x/IEEE> at port 0x100-0x13f irq 19 function= 0 config 1 on pccard0 > wi0: [ITHREAD] > wi0: using RF:PRISM2.5 MAC:ISL3873 > wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) > wi0: Ethernet address: 00:02:6f:... >=20 > # setting the wireless card > ifconfig wi0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890 up > mkdir /var/db > dhclient wi0 >=20 > # "netstat -nr" and "ifconfig wi0" give expected output, > # wi0 driver appears to work as expected. >=20 > # when the card is removed, log output > wi0: link state changed to DOWN > wi0: timeout in wi_seek to ffff/0 > wi0: timeout in wi_seek to ffff/0 > wi0: timeout in wi_seek to ffff/0 > wi0: detached >=20 > ----- > 8. > 8.0 livefs > dell inspiron 6000 laptop > Senao 2511CD Plus >=20 > # card is inserted, log output is > wi0: <INTERSIL HFA384x/IEEE> at port 0x100-0x13f irq19 function= 0 config 1 on pccard0 > wi0: [ITHREAD] >=20 > # setting the wireless card > ifconfig wlan0 ssid colnago wepmode on weptxkey 1 wepkey 0x1234567890= up > # relevant ifconfig output is > wi0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric= 0 mtu 2290 > ether ..... > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b > status: associated > wlan0: flags=3D8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST&= gt; metric 0 mtu 1500 > ether ... > inet6 ... > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid colnago channel 10 (2457 Mhz 11b) > ifconfig: missing or corrupted regdomain database > # I issued "ifconfig" command several times, and each time a different= channel number is displayed: 11,2,5,9,... > mkdir /var/db > dhclient wlan0 > # output to term is > wlan0: no link ............ giving up > # log output > bfe0: link state changed to DOWN >=20 > # I removed the card > # term output is > ifconfig: missing or corrupted regdomain database > # log output is > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id ffff off 0 > wi0: wi_seek_bap: timeout, id fc03 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc03 > wi0: wi_seek_bap_ timeout, id fc00 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc00 > wi0: wi_seek_bap_ timeout, id fc80 off 0 > wi: wi_write_rid: bap0 write failure, rid 0xfc80 > wi0: detached From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 05:16:39 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id DC41C1065672 for ; Thu, 5 Apr 2012 05:16:39 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id AC8D48FC0C for ; Thu, 5 Apr 2012 05:16:39 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so1125319pbc.13 for ; Wed, 04 Apr 2012 22:16:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:content-type :content-transfer-encoding; bh=CSt+PkwfSSzX63xC+D4/UtAvMBXez26k0+vCLem5gVU=; b=y5qWZQIE2cvp6v4TKeKJJyiw3k74TndcxefO+3IGMvhaMdkel7YXYim76lmzJxBt45 nvq7rkF1XXVigNHrirab2jdOMTzDzOM4MIgmwBd9fo7G2J73P0dcvcf6r5msFOnukuhg d4Q/kKwh7hDR5x+x7EQUfpMtmrU78HAuiJZvoNJajf1XxiGLxY65gdkhpAwSjAnTTY45 jkonLT5M6YwqAyTsEtZDJK/lfbu3pr/2TKbkhxoD16YhWJDc1xueA6MIOqeRuhgCUcgI adTSfK+TDdVHDz1CPG/CoKYlkoJA+PlVRNRbihY5R3BAYrTVbh9CKMGLrkejfutbHVkH Ifvw== MIME-Version: 1.0 Received: by 10.68.202.167 with SMTP id kj7mr4025700pbc.9.1333602993820; Wed, 04 Apr 2012 22:16:33 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.77.5 with HTTP; Wed, 4 Apr 2012 22:16:33 -0700 (PDT) In-Reply-To: <201204042345.q34NjGwW030792@svn.freebsd.org> References: <201204042345.q34NjGwW030792@svn.freebsd.org> Date: Wed, 4 Apr 2012 22:16:33 -0700 X-Google-Sender-Auth: j5cZdVoHLsgSCCx5ZYb4TQSf9Jo Message-ID: From: Adrian Chadd To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Subject: Re: svn commit: r233908 - head/sys/dev/ath X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 05:16:39 -0000 Hi, The last thing I need to implement now (besides lots of testing) is HT frame protection. Then I'll flip on 11n by default on ath(4), but I'm going to disable bgscan by default until all of those warts are fixed. I'd really appreciate a lot of testing of this! Thanks, adrian On 4 April 2012 16:45, Adrian Chadd wrote: > Author: adrian > Date: Wed Apr =A04 23:45:15 2012 > New Revision: 233908 > URL: http://svn.freebsd.org/changeset/base/233908 > > Log: > =A0Implement BAR TX. > > =A0A BAR frame must be transmitted when an frame in an A-MPDU session fai= ls > =A0to transmit - it's retried too often, or it can't be cloned for > =A0re-transmission. =A0The BAR frame tells the remote side to advance the > =A0left edge of the block-ack window (BAW) to a new value. > > =A0In order to do this: > > =A0* TX for that particular node/TID must be paused; > =A0* The existing frames in the hardware queue needs to be completed, whe= ther > =A0 =A0they're TXed successfully or otherwise; > =A0* The new left edge of the BAW is then communicated to the remote side > =A0 =A0via a BAR frame; > =A0* Once the BAR frame has been sucessfully TXed, aggregation can resume= ; > =A0* If the BAR frame can't be successfully TXed, the aggregation session > =A0 =A0is torn down. > > =A0This is a first pass that implements the above. =A0What needs to be do= ne/ > =A0tested: > > =A0* What happens during say, a channel reset / stuck beacon _and_ BAR > =A0 =A0TX. =A0It _should_ be correctly buffered and retried once the > =A0 =A0reset has completed. =A0But if a bgscan occurs (and they shouldn't= , > =A0 =A0grr) the BAR frame will be forcibly failed and the aggregation ses= sion > =A0 =A0will be torn down. > > =A0 =A0Yes, another reason to disable bgscan until I've figured this out. > > =A0* There's way too much locking going on here. =A0I'm going to do a cou= ple > =A0 =A0of further passes of sanitising and refactoring so the (re) lockin= g > =A0 =A0isn't so heavy. =A0Right now I'm going for correctness, not speed. > > =A0* The BAR TX can fail if the hardware TX queue is full. =A0Since there= 's > =A0 =A0no "free" space kept for management frames, a full TX queue (from = eg > =A0 =A0an iperf test) can race with your ability to allocate ath_buf/mbuf= s > =A0 =A0and cause issues. =A0I'll knock this on the head with a subsequent > =A0 =A0commit. > > =A0* I need to do some _much_ more thorough testing in hostap mode to ens= ure > =A0 =A0that many concurrent traffic streams to different end nodes are co= rrectly > =A0 =A0handled. =A0I'll find and squish whichever bugs show up here. > > =A0But, this is an important step to being able to flip on 802.11n by def= ault. > =A0The last issue (besides bug fixes, of course) is HT frame protection a= nd > =A0I'll address that in a subsequent commit. > > Modified: > =A0head/sys/dev/ath/if_ath_tx.c > =A0head/sys/dev/ath/if_athvar.h > > Modified: head/sys/dev/ath/if_ath_tx.c > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D > --- head/sys/dev/ath/if_ath_tx.c =A0 =A0 =A0 =A0Wed Apr =A04 23:40:29 201= 2 =A0 =A0 =A0 =A0(r233907) > +++ head/sys/dev/ath/if_ath_tx.c =A0 =A0 =A0 =A0Wed Apr =A04 23:45:15 201= 2 =A0 =A0 =A0 =A0(r233908) > @@ -2598,11 +2598,11 @@ ath_tx_tid_init(struct ath_softc *sc, st > =A0static void > =A0ath_tx_tid_pause(struct ath_softc *sc, struct ath_tid *tid) > =A0{ > - =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 ATH_TXQ_LOCK_ASSERT(sc->sc_ac2q[tid->ac]); > =A0 =A0 =A0 =A0tid->paused++; > =A0 =A0 =A0 =A0DPRINTF(sc, ATH_DEBUG_SW_TX_CTRL, "%s: paused =3D %d\n", > =A0 =A0 =A0 =A0 =A0 =A0__func__, tid->paused); > - =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > =A0} > > =A0/* > @@ -2629,6 +2629,158 @@ ath_tx_tid_resume(struct ath_softc *sc, > =A0} > > =A0/* > + * Suspend the queue because we need to TX a BAR. > + */ > +static void > +ath_tx_tid_bar_suspend(struct ath_softc *sc, struct ath_tid *tid) > +{ > + =A0 =A0 =A0 ATH_TXQ_LOCK_ASSERT(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 DPRINTF(sc, ATH_DEBUG_SW_TX_BAW, > + =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, called\n", > + =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 tid); > + > + =A0 =A0 =A0 /* We shouldn't be called when bar_tx is 1 */ > + =A0 =A0 =A0 if (tid->bar_tx) { > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, "%s: bar_tx is 1?= !\n", > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__); > + =A0 =A0 =A0 } > + > + =A0 =A0 =A0 /* If we've already been called, just be patient. */ > + =A0 =A0 =A0 if (tid->bar_wait) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return; > + > + =A0 =A0 =A0 /* Wait! */ > + =A0 =A0 =A0 tid->bar_wait =3D 1; > + > + =A0 =A0 =A0 /* Only one pause, no matter how many frames fail */ > + =A0 =A0 =A0 ath_tx_tid_pause(sc, tid); > +} > + > +/* > + * We've finished with BAR handling - either we succeeded or > + * failed. Either way, unsuspend TX. > + */ > +static void > +ath_tx_tid_bar_unsuspend(struct ath_softc *sc, struct ath_tid *tid) > +{ > + =A0 =A0 =A0 ATH_TXQ_LOCK_ASSERT(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 DPRINTF(sc, ATH_DEBUG_SW_TX_BAW, > + =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, called\n", > + =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 tid); > + > + =A0 =A0 =A0 if (tid->bar_tx =3D=3D 0 || tid->bar_wait =3D=3D 0) { > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, "%s: bar_tx=3D%d,= bar_wait=3D%d: ?\n", > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__, tid->bar_tx, tid->bar_wai= t); > + =A0 =A0 =A0 } > + > + =A0 =A0 =A0 tid->bar_tx =3D tid->bar_wait =3D 0; > + =A0 =A0 =A0 ath_tx_tid_resume(sc, tid); > +} > + > +/* > + * Return whether we're ready to TX a BAR frame. > + * > + * Requires the TID lock be held. > + */ > +static int > +ath_tx_tid_bar_tx_ready(struct ath_softc *sc, struct ath_tid *tid) > +{ > + > + =A0 =A0 =A0 ATH_TXQ_LOCK_ASSERT(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 if (tid->bar_wait =3D=3D 0 || tid->hwq_depth > 0) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return (0); > + > + =A0 =A0 =A0 return (1); > +} > + > +/* > + * Check whether the current TID is ready to have a BAR > + * TXed and if so, do the TX. > + * > + * Since the TID/TXQ lock can't be held during a call to > + * ieee80211_send_bar(), we have to do the dirty thing of unlocking it, > + * sending the BAR and locking it again. > + * > + * Eventually, the code to send the BAR should be broken out > + * from this routine so the lock doesn't have to be reacquired > + * just to be immediately dropped by the caller. > + */ > +static void > +ath_tx_tid_bar_tx(struct ath_softc *sc, struct ath_tid *tid) > +{ > + =A0 =A0 =A0 struct ieee80211_tx_ampdu *tap; > + > + =A0 =A0 =A0 ATH_TXQ_LOCK_ASSERT(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 DPRINTF(sc, ATH_DEBUG_SW_TX_BAW, > + =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, called\n", > + =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 tid); > + > + =A0 =A0 =A0 tap =3D ath_tx_get_tx_tid(tid->an, tid->tid); > + > + =A0 =A0 =A0 /* > + =A0 =A0 =A0 =A0* This is an error condition! > + =A0 =A0 =A0 =A0*/ > + =A0 =A0 =A0 if (tid->bar_wait =3D=3D 0 || tid->bar_tx =3D=3D 1) { > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, bar_tx=3D%d, bar_wai= t=3D%d: ?\n", > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 tid, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 tid->bar_tx, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 tid->bar_wait); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return; > + =A0 =A0 =A0 } > + > + =A0 =A0 =A0 /* Don't do anything if we still have pending frames */ > + =A0 =A0 =A0 if (tid->hwq_depth > 0) { > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 DPRINTF(sc, ATH_DEBUG_SW_TX_BAW, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, hwq_depth=3D%d, wait= ing\n", > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 tid, > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 tid->hwq_depth); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return; > + =A0 =A0 =A0 } > + > + =A0 =A0 =A0 /* We're now about to TX */ > + =A0 =A0 =A0 tid->bar_tx =3D 1; > + > + =A0 =A0 =A0 /* > + =A0 =A0 =A0 =A0* Calculate new BAW left edge, now that all frames have = either > + =A0 =A0 =A0 =A0* succeeded or failed. > + =A0 =A0 =A0 =A0* > + =A0 =A0 =A0 =A0* XXX verify this is _actually_ the valid value to begin= at! > + =A0 =A0 =A0 =A0*/ > + =A0 =A0 =A0 DPRINTF(sc, ATH_DEBUG_SW_TX_BAW, > + =A0 =A0 =A0 =A0 =A0 "%s: tid=3D%p, new BAW left edge=3D%d\n", > + =A0 =A0 =A0 =A0 =A0 __func__, > + =A0 =A0 =A0 =A0 =A0 tid, > + =A0 =A0 =A0 =A0 =A0 tap->txa_start); > + > + =A0 =A0 =A0 /* Try sending the BAR frame */ > + =A0 =A0 =A0 /* We can't hold the lock here! */ > + > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > + =A0 =A0 =A0 if (ieee80211_send_bar(&tid->an->an_node, tap, tap->txa_sta= rt) =3D=3D 0) { > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Success? Now we wait for notification th= at it's done */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[tid->ac]); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return; > + =A0 =A0 =A0 } > + > + =A0 =A0 =A0 /* Failure? For now, warn loudly and continue */ > + =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[tid->ac]); > + =A0 =A0 =A0 device_printf(sc->sc_dev, "%s: tid=3D%p, failed to TX BAR, = continue!\n", > + =A0 =A0 =A0 =A0 =A0 __func__, tid); > + =A0 =A0 =A0 ath_tx_tid_bar_unsuspend(sc, tid); > +} > + > + > +/* > =A0* Free any packets currently pending in the software TX queue. > =A0* > =A0* This will be called when a node is being deleted. > @@ -3077,7 +3229,6 @@ ath_tx_aggr_retry_unaggr(struct ath_soft > =A0 =A0 =A0 =A0int tid =3D bf->bf_state.bfs_tid; > =A0 =A0 =A0 =A0struct ath_tid *atid =3D &an->an_tid[tid]; > =A0 =A0 =A0 =A0struct ieee80211_tx_ampdu *tap; > - =A0 =A0 =A0 int txseq; > > =A0 =A0 =A0 =A0ATH_TXQ_LOCK(sc->sc_ac2q[atid->ac]); > > @@ -3118,18 +3269,14 @@ ath_tx_aggr_retry_unaggr(struct ath_soft > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0bf->bf_state.bfs_dobaw =3D 0; > > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Send BAR frame */ > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* This'll end up going into net80211 and= back out > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* again, via ic->ic_raw_xmit(). > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0*/ > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 txseq =3D tap->txa_start; > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Suspend the TX queue and get ready to se= nd the BAR */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_suspend(sc, atid); > > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "%s: TID %d: send BAR; seq %d\n", _= _func__, tid, txseq); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Send the BAR if there are no other frame= s waiting */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, atid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, atid)= ; > > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* XXX TODO: send BAR */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Free buffer, bf is free after this call= */ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_tx_default_comp(sc, bf, 0); > @@ -3149,6 +3296,9 @@ ath_tx_aggr_retry_unaggr(struct ath_soft > =A0 =A0 =A0 =A0 */ > =A0 =A0 =A0 =A0ATH_TXQ_INSERT_HEAD(atid, bf, bf_list); > =A0 =A0 =A0 =A0ath_tx_tid_sched(sc, atid); > + =A0 =A0 =A0 /* Send the BAR if there are no other frames waiting */ > + =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, atid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, atid); > > =A0 =A0 =A0 =A0ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > =A0} > @@ -3278,17 +3428,20 @@ ath_tx_comp_aggr_error(struct ath_softc > =A0 =A0 =A0 =A0 * in the ifnet TX context or raw TX context.) > =A0 =A0 =A0 =A0 */ > =A0 =A0 =A0 =A0if (drops) { > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 int txseq =3D tap->txa_start; > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "%s: TID %d: send BAR; seq %d\n", > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__, tid->tid, txseq); > - > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* XXX TODO: send BAR */ > - =A0 =A0 =A0 } else { > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Suspend the TX queue and get ready to se= nd the BAR */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_suspend(sc, tid); > =A0 =A0 =A0 =A0} > > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > + > + =A0 =A0 =A0 /* > + =A0 =A0 =A0 =A0* Send BAR if required > + =A0 =A0 =A0 =A0*/ > + =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[tid->ac]); > + =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, tid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, tid); > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[tid->ac]); > + > =A0 =A0 =A0 =A0/* Complete frames which errored out */ > =A0 =A0 =A0 =A0while ((bf =3D TAILQ_FIRST(&bf_cq)) !=3D NULL) { > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0TAILQ_REMOVE(&bf_cq, bf, bf_list); > @@ -3328,6 +3481,10 @@ ath_tx_comp_cleanup_aggr(struct ath_soft > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0atid->cleanup_inprogress =3D 0; > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ath_tx_tid_resume(sc, atid); > =A0 =A0 =A0 =A0} > + > + =A0 =A0 =A0 /* Send BAR if required */ > + =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, atid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, atid); > =A0 =A0 =A0 =A0ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > > =A0 =A0 =A0 =A0/* Handle frame completion */ > @@ -3542,9 +3699,10 @@ ath_tx_aggr_comp_aggr(struct ath_softc * > =A0 =A0 =A0 =A0 * send bar if we dropped any frames > =A0 =A0 =A0 =A0 */ > =A0 =A0 =A0 =A0if (drops) { > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_printf(sc->sc_dev, > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "%s: TID %d: send BAR; seq %d\n", _= _func__, tid, txseq); > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* XXX TODO: send BAR */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Suspend the TX queue and get ready to se= nd the BAR */ > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[atid->ac]); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_suspend(sc, atid); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > =A0 =A0 =A0 =A0} > > =A0 =A0 =A0 =A0/* Prepend all frames to the beginning of the queue */ > @@ -3559,6 +3717,14 @@ ath_tx_aggr_comp_aggr(struct ath_softc * > =A0 =A0 =A0 =A0DPRINTF(sc, ATH_DEBUG_SW_TX_AGGR, > =A0 =A0 =A0 =A0 =A0 =A0"%s: txa_start now %d\n", __func__, tap->txa_start= ); > > + =A0 =A0 =A0 /* > + =A0 =A0 =A0 =A0* Send BAR if required > + =A0 =A0 =A0 =A0*/ > + =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[atid->ac]); > + =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, atid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, atid); > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > + > =A0 =A0 =A0 =A0/* Do deferred completion */ > =A0 =A0 =A0 =A0while ((bf =3D TAILQ_FIRST(&bf_cq)) !=3D NULL) { > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0TAILQ_REMOVE(&bf_cq, bf, bf_list); > @@ -3652,6 +3818,12 @@ ath_tx_aggr_comp_unaggr(struct ath_softc > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0__func__, SEQNO(bf= ->bf_state.bfs_seqno)); > =A0 =A0 =A0 =A0} > > + =A0 =A0 =A0 /* > + =A0 =A0 =A0 =A0* Send BAR if required > + =A0 =A0 =A0 =A0*/ > + =A0 =A0 =A0 if (ath_tx_tid_bar_tx_ready(sc, atid)) > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_tx(sc, atid); > + > =A0 =A0 =A0 =A0ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > > =A0 =A0 =A0 =A0ath_tx_default_comp(sc, bf, fail); > @@ -4080,7 +4252,9 @@ ath_addba_request(struct ieee80211_node > =A0 =A0 =A0 =A0 * it'll be "after" the left edge of the BAW and thus it'l= l > =A0 =A0 =A0 =A0 * fall within it. > =A0 =A0 =A0 =A0 */ > + =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[atid->tid]); > =A0 =A0 =A0 =A0ath_tx_tid_pause(sc, atid); > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->tid]); > > =A0 =A0 =A0 =A0DPRINTF(sc, ATH_DEBUG_SW_TX_CTRL, > =A0 =A0 =A0 =A0 =A0 =A0"%s: called; dialogtoken=3D%d, baparamset=3D%d, ba= timeout=3D%d\n", > @@ -4166,7 +4340,9 @@ ath_addba_stop(struct ieee80211_node *ni > =A0 =A0 =A0 =A0DPRINTF(sc, ATH_DEBUG_SW_TX_CTRL, "%s: called\n", __func__= ); > > =A0 =A0 =A0 =A0/* Pause TID traffic early, so there aren't any races */ > + =A0 =A0 =A0 ATH_TXQ_LOCK(sc->sc_ac2q[atid->tid]); > =A0 =A0 =A0 =A0ath_tx_tid_pause(sc, atid); > + =A0 =A0 =A0 ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->tid]); > > =A0 =A0 =A0 =A0/* There's no need to hold the TXQ lock here */ > =A0 =A0 =A0 =A0sc->sc_addba_stop(ni, tap); > @@ -4213,7 +4389,7 @@ ath_bar_response(struct ieee80211_node * > =A0 =A0 =A0 =A0 */ > =A0 =A0 =A0 =A0if (status =3D=3D 0 || attempts =3D=3D 50) { > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ATH_TXQ_LOCK(sc->sc_ac2q[atid->ac]); > - =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_resume(sc, atid); > + =A0 =A0 =A0 =A0 =A0 =A0 =A0 ath_tx_tid_bar_unsuspend(sc, atid); > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ATH_TXQ_UNLOCK(sc->sc_ac2q[atid->ac]); > =A0 =A0 =A0 =A0} > =A0} > > Modified: head/sys/dev/ath/if_athvar.h > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D > --- head/sys/dev/ath/if_athvar.h =A0 =A0 =A0 =A0Wed Apr =A04 23:40:29 201= 2 =A0 =A0 =A0 =A0(r233907) > +++ head/sys/dev/ath/if_athvar.h =A0 =A0 =A0 =A0Wed Apr =A04 23:45:15 201= 2 =A0 =A0 =A0 =A0(r233908) > @@ -106,6 +106,8 @@ struct ath_tid { > =A0 =A0 =A0 =A0TAILQ_ENTRY(ath_tid) =A0 =A0axq_qelem; > =A0 =A0 =A0 =A0int =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 sched; > =A0 =A0 =A0 =A0int =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 paused; /* >0 = if the TID has been paused */ > + =A0 =A0 =A0 int =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 bar_wait; =A0 = =A0 =A0 /* waiting for BAR */ > + =A0 =A0 =A0 int =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 bar_tx; =A0 =A0= =A0 =A0 /* BAR TXed */ > > =A0 =A0 =A0 =A0/* > =A0 =A0 =A0 =A0 * Is the TID being cleaned up after a transition From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 09:02:38 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 2E6C11065670 for ; Thu, 5 Apr 2012 09:02:38 +0000 (UTC) (envelope-from nm.knife@gmail.com) Received: from mail-we0-f182.google.com (mail-we0-f182.google.com [74.125.82.182]) by mx1.freebsd.org (Postfix) with ESMTP id B03198FC0C for ; Thu, 5 Apr 2012 09:02:37 +0000 (UTC) Received: by wern13 with SMTP id n13so916259wer.13 for ; Thu, 05 Apr 2012 02:02:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=TSyfRpdqBnAuDVDZWstqcrEbTtuCR6x1kqOXH3LTS/4=; b=0TpGl2qHbQaf6RasSysARPACnMO1p4rXWRJACPGiEzmu06qGG45xN+hQoLEKdsLEUZ r5fsyzEGGXHfcNum9CvQvqIFoBH8kY2Utzp7p0d9h8yISPHroIDKgcXosBwKLSEPXv0+ 5WY0KP9gF17jLero7KQnAZtviVTBr14Y9P9iYAQ2FakNLk/yFLK+K1NyU1Q9WI2nCN+P cNktuz4S1rSN+fHsOx/N4iu2NRYF9I4gyqrWnLTr+6e9xwBkAJpcuPjqQ+rkc/A0UVDf Nz5P2SYhmOLva4h7E4OmSlABE2ffG9ZpR2GyZgzr9RXp6GfCefqAAzj63tXTmKHiwGYt s+2A== MIME-Version: 1.0 Received: by 10.216.138.202 with SMTP id a52mr1191477wej.53.1333616555909; Thu, 05 Apr 2012 02:02:35 -0700 (PDT) Received: by 10.227.58.68 with HTTP; Thu, 5 Apr 2012 02:02:35 -0700 (PDT) Date: Thu, 5 Apr 2012 02:02:35 -0700 Message-ID: From: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 09:02:38 -0000 Hello, My Intel 1000-N is really slow on Internet speed. I noticed this problem in Windows, too, but it's much worse in FreeBSD. I get capped at like 300kbs and I have 1.8mbs dl. Even speedtest cannot come to level. I heard it might be necessary to disable n mode? How can I do that? Here is ifconfig: iwn0: flags=8843 metric 0 mtu 2290 ether 74:e5:0b:df:a8:48 nd6 options=29 media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated wlan0: flags=8843 metric 0 mtu 1500 ether 74:e5:0b:df:a8:48 inet 192.168.1.82 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=29 media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11g status: associated ssid mreja channel 5 (2432 MHz 11g) bssid 28:16:2e:da:02:f9 country US authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS wme roaming MANUAL Please advise how to disable n mode or if there is another issue. This is a nuissanse. Thanks -- Lyubomir Grigorov (bgalakazam) From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 09:26:03 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 8C7E8106566B for ; Thu, 5 Apr 2012 09:26:03 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-lpp01m010-f54.google.com (mail-lpp01m010-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id 0A1A88FC0C for ; Thu, 5 Apr 2012 09:26:02 +0000 (UTC) Received: by lagv3 with SMTP id v3so1987635lag.13 for ; Thu, 05 Apr 2012 02:26:01 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:in-reply-to:references:date :message-id:subject:from:to:cc:content-type :content-transfer-encoding:x-gm-message-state; bh=V6RoXnp3lII4STLZA8XCE0lM81yqZwGJ0YZQ4MzkM0U=; b=C48FyaZihFuWDN+BtATlJcbzO4V812silkBv94R2F0P3g71CpZMtZV+Kyv24sIkXmZ JUTvjF1hSaGBiTw6b5LGDf/nAhHVQXDyFgEFNmbpyr4YKm1KX7bZAQ2uH3JbUL2vmZbR uEBYz6xIM0Ic4s9K7BJZx20UEnDRI2swuoO2otWNS0EgmusCI6GOCi4f7AWNz1l/Wx1u AahUDetHIVeKeqr8NWP3ibZUyxJzKdWrdXvyJd/emMM+0ytqMo02kqWExjIDYAJj437H VryVZeTC/bXLweCifEXWEpBkl2fXJhPL4VTZ8q7FCGK8FY33bihGfgShb6FDiLCFTY0h heLw== MIME-Version: 1.0 Received: by 10.152.133.9 with SMTP id oy9mr2045319lab.43.1333617961626; Thu, 05 Apr 2012 02:26:01 -0700 (PDT) Received: by 10.152.112.38 with HTTP; Thu, 5 Apr 2012 02:26:01 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: References: Date: Thu, 5 Apr 2012 11:26:01 +0200 Message-ID: From: Bernhard Schmidt To: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable X-Gm-Message-State: ALoCoQlDmaTFdP0efgywEFfkTh1zVrWn2iYaUWWBC63a2rkC+a9lDp/8R299S6Qi6ZR/VZ3Fs6MS Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 09:26:03 -0000 On Thu, Apr 5, 2012 at 11:02, =CB=FE=E1=EE=EC=E8=F0 =C3=F0=E8=E3=EE=F0=EE= =E2 wrote: > Hello, > > My Intel 1000-N is really slow on Internet speed. I noticed this problem = in > Windows, too, but it's much worse in FreeBSD. I get capped at like 300kbs > and I have 1.8mbs dl. Even speedtest cannot come to level. I heard it mig= ht > be necessary to disable n mode? How can I do that? > > Here is ifconfig: > > iwn0: flags=3D8843 metric 0 mtu 2= 290 > ether 74:e5:0b:df:a8:48 > nd6 options=3D29 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g > status: associated > > wlan0: flags=3D8843 metric 0 mtu = 1500 > ether 74:e5:0b:df:a8:48 > inet 192.168.1.82 netmask 0xffffff00 broadcast 192.168.1.255 > nd6 options=3D29 > media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11g > status: associated > ssid mreja channel 5 (2432 MHz 11g) bssid 28:16:2e:da:02:f9 > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF > TKIP 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS > wme roaming MANUAL > > Please advise how to disable n mode or if there is another issue. This is= a > nuissanse. No 11n active according to the output above, anyways ifconfig -ht does disable HT (11n) support. What's more worrying though is the "DS/1Mbps" part, obviously you won't get any more data through this way. Can you please run wlandebug +rate and provide the relevant messages after doing some traffic? --=20 Bernhard From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 09:46:36 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 86464106566C for ; Thu, 5 Apr 2012 09:46:36 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-lpp01m010-f54.google.com (mail-lpp01m010-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id 000728FC14 for ; Thu, 5 Apr 2012 09:46:35 +0000 (UTC) Received: by lagv3 with SMTP id v3so2016305lag.13 for ; Thu, 05 Apr 2012 02:46:34 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:in-reply-to:references:date :message-id:subject:from:to:cc:content-type :content-transfer-encoding:x-gm-message-state; bh=wDYweE8MkLcPZDbaJgz4RD2e9jnllV8QoPAkNbxyTuU=; b=VO6aBjt32f680idPS65t545vUllZOGwPTXr25ADiOnoe2xHufqdMp4/qzWRnlVSP9w xXw1u1DMKvg9klJ/3CVwudBDv4tAWqmUxaHekjCkTgbFEuVfhLMlpSLQ/pMi8VN/Qx8e w4rR0puZJSQCDYtzUERNKFFkX+5wLObiP/OK06lGuvldco81ZOWdOPYu+8JCke/y86bP IGf+6JwftWKuid8rH2gJmaYvXgDMRs8Zw6pU8seAEHn1NxmHqn2gLTieZsPiLRtZP66K iL7z05RM10MXQxU6cdk7ytW8vqyhdxQ+W08vgh1cPZh2ENudmqh4adjeuo/pPLiAzyI+ Xjow== MIME-Version: 1.0 Received: by 10.152.104.43 with SMTP id gb11mr2227538lab.8.1333619194619; Thu, 05 Apr 2012 02:46:34 -0700 (PDT) Received: by 10.152.112.38 with HTTP; Thu, 5 Apr 2012 02:46:34 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: References: Date: Thu, 5 Apr 2012 11:46:34 +0200 Message-ID: From: Bernhard Schmidt To: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable X-Gm-Message-State: ALoCoQntz8xUfK3yV38Fsv/Ok3nErvys0WON9+JQdoxcA3fWFZjxkDgzBoIH24eND41QQvLsxCqw Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 09:46:36 -0000 On Thu, Apr 5, 2012 at 11:02, =CB=FE=E1=EE=EC=E8=F0 =C3=F0=E8=E3=EE=F0=EE= =E2 wrote: > Hello, > > My Intel 1000-N is really slow on Internet speed. I noticed this problem = in > Windows, too, but it's much worse in FreeBSD. I get capped at like 300kbs > and I have 1.8mbs dl. Even speedtest cannot come to level. Also, is this only with this particular AP or any other one too? --=20 Bernhard From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 09:57:04 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 061A5106566C for ; Thu, 5 Apr 2012 09:57:04 +0000 (UTC) (envelope-from nm.knife@gmail.com) Received: from mail-we0-f182.google.com (mail-we0-f182.google.com [74.125.82.182]) by mx1.freebsd.org (Postfix) with ESMTP id 896398FC12 for ; Thu, 5 Apr 2012 09:57:03 +0000 (UTC) Received: by wern13 with SMTP id n13so954214wer.13 for ; Thu, 05 Apr 2012 02:57:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=NUhtBnLfWN+Mbzx1fY4+P0BC4BI0axXoKappfUUF3rM=; b=bZZTkHtvDcqk1H8FKHdkXy0OCSgUBUQXiO8ZFBJlIlqga2g/j4uXhs7le+3BJOttXE NM7wfSkqMwPKdL5a7AjlUpdyMxSOWJeK5P+x+SE8/XWmv/2wfNZ0klP6zhgTxu7Kcv/i fTtEyCRELDNSQFww00WEIkRgQ63h0p1rLKn7JMbCl6tO+nmVb06OSgyro0ymg1iwxTPR DkO3ZMqvmyngZg6HixFutDqIORLrS7JUJs9mH6A3L0ePCQvgLqHu2qciuyPMAnVX5VVD rzwvuvg/E5Yho5Z6feO6ZP5YO2IJcOefEcTifEi+gQ2JZv/Fssr/auxHS5WRFqv2vVbz DMcg== MIME-Version: 1.0 Received: by 10.180.88.199 with SMTP id bi7mr3281758wib.12.1333619822666; Thu, 05 Apr 2012 02:57:02 -0700 (PDT) Received: by 10.227.58.68 with HTTP; Thu, 5 Apr 2012 02:57:02 -0700 (PDT) In-Reply-To: References: Date: Thu, 5 Apr 2012 02:57:02 -0700 Message-ID: From: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= To: Bernhard Schmidt Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 09:57:04 -0000 $ wlandebug +rate net.wlan.0.debug: 0x20 I don't know if it was this or some other wizardry, but the DS has been changing from 54 to 48 after I ran that command. I was able to DL at 1.5+mbs now. wlan0: flags=3D8843 metric 0 mtu 15= 00 ether 74:e5:0b:df:a8:48 inet 192.168.1.82 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=3D29 media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g status: associated ssid mreja channel 5 (2432 MHz 11g) bssid 28:16:2e:da:02:f9 country US authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS wme roaming MANUAL Issue was with 2 tested AP's, but I have 2 more FreeBSD 9.0 machines using one of those AP without problems. I have ThinkPad X220 and was recommended Intel 1000-N over Realtek RTL8192SE / RTL8188CE. I hope the issue is gone for good. Again, not sure if your command helped or not. Cheers. :) =CD=E0 05 =E0=EF=F0=E8=EB 2012, 02:46, Bernhard Schmidt =ED=E0=EF=E8=F1=E0: > On Thu, Apr 5, 2012 at 11:02, =CB=FE=E1=EE=EC=E8=F0 =C3=F0=E8=E3=EE=F0=EE= =E2 wrote: > > Hello, > > > > My Intel 1000-N is really slow on Internet speed. I noticed this proble= m > in > > Windows, too, but it's much worse in FreeBSD. I get capped at like 300k= bs > > and I have 1.8mbs dl. Even speedtest cannot come to level. > > Also, is this only with this particular AP or any other one too? > > -- > Bernhard > --=20 Lyubomir Grigorov (bgalakazam) From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 10:03:06 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 1FA0E106566C for ; Thu, 5 Apr 2012 10:03:06 +0000 (UTC) (envelope-from bschmidt@techwires.net) Received: from mail-lpp01m010-f54.google.com (mail-lpp01m010-f54.google.com [209.85.215.54]) by mx1.freebsd.org (Postfix) with ESMTP id 827DE8FC14 for ; Thu, 5 Apr 2012 10:03:05 +0000 (UTC) Received: by lagv3 with SMTP id v3so2040376lag.13 for ; Thu, 05 Apr 2012 03:03:04 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:in-reply-to:references:date :message-id:subject:from:to:cc:content-type :content-transfer-encoding:x-gm-message-state; bh=Q4Eb55d8UnLo6eSynqZCe55tDEOEbX7mnkCsVTxyaBc=; b=JFQXebw2N6t0m3TxnYIL8q7rQvAgh/fZoj8LDhsCiIFoTUwdA2hSKsGj29ObnjhnNI R4UEwBLWYD78ZMnsqdyraYqhqyDoN1Dppbaae5a72/1fal4g0o34tpswnvjf2sjq+q+a T4tTfG5g1CsbkdHix9Y19gLRKbOgoqgChRJ5qFp7pOhpeTdSLUKdkuqi6cqiaK02ZYTF ecTI0BsmuK6pquWXwBUCIVtAau0ri1CAH6uk0OYWGvLqOwWCj8m8OCPkG3C5QGXMPJM2 qjD23yWB4jiEx5VOHTsqfi0gvNG6quyQoLVKtEBU/S7xhA4eT9wIbGaKpBmItbVcgwAR X91w== MIME-Version: 1.0 Received: by 10.152.108.171 with SMTP id hl11mr2210405lab.29.1333620184454; Thu, 05 Apr 2012 03:03:04 -0700 (PDT) Received: by 10.152.112.38 with HTTP; Thu, 5 Apr 2012 03:03:04 -0700 (PDT) X-Originating-IP: [79.140.39.245] In-Reply-To: References: Date: Thu, 5 Apr 2012 12:03:04 +0200 Message-ID: From: Bernhard Schmidt To: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable X-Gm-Message-State: ALoCoQlTvNu9WpxEPYpo1QchORZ7jCi9mIB3LJ0D1F+AsSff4lf3Vz3//FiYdMHlTz7/R5xdXnQ2 Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 10:03:06 -0000 On Thu, Apr 5, 2012 at 11:57, =CB=FE=E1=EE=EC=E8=F0 =C3=F0=E8=E3=EE=F0=EE= =E2 wrote: > $ wlandebug +rate > net.wlan.0.debug: 0x20 Look into /var/log/messages or the actual debug output. > I don't know if it was this or some other wizardry, but the DS has been > changing from 54 to 48 after I ran that command. I was able to DL at 1.5+= mbs > now. Well, as long as it doesn't stick to 1Mbps you should be fine. > wlan0: flags=3D8843 metric 0 mtu = 1500 > ether 74:e5:0b:df:a8:48 > inet 192.168.1.82 netmask 0xffffff00 broadcast 192.168.1.255 > nd6 options=3D29 > media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g > > status: associated > ssid mreja channel 5 (2432 MHz 11g) bssid 28:16:2e:da:02:f9 > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF > TKIP 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS > wme roaming MANUAL > > Issue was with 2 tested AP's, but I have 2 more FreeBSD 9.0 machines usin= g > one of those AP without problems. Ok, thanks. > I have ThinkPad X220 and was recommended Intel 1000-N over =A0Realtek > RTL8192SE / RTL8188CE. I hope the issue is gone for good. Again, not sure= if > your command helped or not. So, you also run the -ht command? --=20 Bernhard From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 21:56:33 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 840F2106564A; Thu, 5 Apr 2012 21:56:33 +0000 (UTC) (envelope-from lev@FreeBSD.org) Received: from onlyone.friendlyhosting.spb.ru (onlyone.friendlyhosting.spb.ru [46.4.40.135]) by mx1.freebsd.org (Postfix) with ESMTP id 05D568FC08; Thu, 5 Apr 2012 21:56:33 +0000 (UTC) Received: from lion.home.serebryakov.spb.ru (89.112.15.178.pppoe.eltel.net [89.112.15.178]) (Authenticated sender: lev@serebryakov.spb.ru) by onlyone.friendlyhosting.spb.ru (Postfix) with ESMTPA id 726D54AC1C; Fri, 6 Apr 2012 01:56:26 +0400 (MSK) Date: Fri, 6 Apr 2012 01:56:21 +0400 From: Lev Serebryakov X-Priority: 3 (Normal) Message-ID: <473492866.20120406015621@serebryakov.spb.ru> To: Adrian Chadd In-Reply-To: References: <201204042345.q34NjGwW030792@svn.freebsd.org> MIME-Version: 1.0 Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable Cc: freebsd-wireless@freebsd.org Subject: Re: svn commit: r233908 - head/sys/dev/ath X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 21:56:33 -0000 Hello, Adrian. You wrote 5 =E0=EF=F0=E5=EB=FF 2012 =E3., 9:16:33: > The last thing I need to implement now (besides lots of testing) is HT > frame protection. > Then I'll flip on 11n by default on ath(4), but I'm going to disable > bgscan by default until all of those warts are fixed. > I'd really appreciate a lot of testing of this! should "ampdutx" be turned off with this code? --=20 // Black Lion AKA Lev Serebryakov From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 22:00:05 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 435FF1065670; Thu, 5 Apr 2012 22:00:05 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 035568FC08; Thu, 5 Apr 2012 22:00:04 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so2067378pbc.13 for ; Thu, 05 Apr 2012 15:00:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=7sIJh8v493lUSsnm36D/glO0GU2L1URXJxI6u+2w36Y=; b=DpaH8BN/0TsnZcgtkzF38N+1dLmG9C2McMI+Aq6nbSuTs8dsAaA1ytAAzY9KV6ZlDy MEDqy1cZiS4O42Dp8JOK3u9CyKui/ryP0bBsUvqXaa7o4aaavPSaDKC/fGrYAdlRec1W QQmuP5tvL78ntiqzG02zmhR/vTHlwiXzvqtAsd/Jyrk4Am3W+NzCKg8GQLBE+yid+b8e rx/sg4fPWdb4AImT9zt1XTmflAkoLEnRVE3L22BLq+l0AYx5cub/8Ej587BfMkKkGMJb INsE5ppNhuV++0HLiOZprWOssikSm5FUNXOl/7C4/YGuLkZvqw4CrRPQQRaAZe0lnPLp HXiw== MIME-Version: 1.0 Received: by 10.68.200.137 with SMTP id js9mr10241650pbc.110.1333663204493; Thu, 05 Apr 2012 15:00:04 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.77.5 with HTTP; Thu, 5 Apr 2012 15:00:04 -0700 (PDT) In-Reply-To: <473492866.20120406015621@serebryakov.spb.ru> References: <201204042345.q34NjGwW030792@svn.freebsd.org> <473492866.20120406015621@serebryakov.spb.ru> Date: Thu, 5 Apr 2012 15:00:04 -0700 X-Google-Sender-Auth: lr5VKxh5aSKTsv-PLnKzR_NpMiI Message-ID: From: Adrian Chadd To: Lev Serebryakov Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-wireless@freebsd.org Subject: Re: svn commit: r233908 - head/sys/dev/ath X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 22:00:05 -0000 2012/4/5 Lev Serebryakov : > Hello, Adrian. > You wrote 5 =D0=B0=D0=BF=D1=80=D0=B5=D0=BB=D1=8F 2012 =D0=B3., 9:16:33: > >> The last thing I need to implement now (besides lots of testing) is HT >> frame protection. > >> Then I'll flip on 11n by default on ath(4), but I'm going to disable >> bgscan by default until all of those warts are fixed. > >> I'd really appreciate a lot of testing of this! > =C2=A0should "ampdutx" be turned off with this code? This requires ampdu tx on. BAR TX occurs with aggregation. :) adrian From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 22:55:52 2012 Return-Path: Delivered-To: freebsd-wireless@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 94F00106564A; Thu, 5 Apr 2012 22:55:52 +0000 (UTC) (envelope-from adrian@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 6841C8FC12; Thu, 5 Apr 2012 22:55:52 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.5/8.14.5) with ESMTP id q35MtqwN011941; Thu, 5 Apr 2012 22:55:52 GMT (envelope-from adrian@freefall.freebsd.org) Received: (from adrian@localhost) by freefall.freebsd.org (8.14.5/8.14.5/Submit) id q35Mtqxk011937; Thu, 5 Apr 2012 22:55:52 GMT (envelope-from adrian) Date: Thu, 5 Apr 2012 22:55:52 GMT Message-Id: <201204052255.q35Mtqxk011937@freefall.freebsd.org> To: adrian@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-wireless@FreeBSD.org From: adrian@FreeBSD.org Cc: Subject: Re: kern/166684: [ath] [net80211] mgmtrate/mcastrate isn't updated based on the the BSS rate list X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 22:55:52 -0000 Synopsis: [ath] [net80211] mgmtrate/mcastrate isn't updated based on the the BSS rate list Responsible-Changed-From-To: freebsd-bugs->freebsd-wireless Responsible-Changed-By: adrian Responsible-Changed-When: Thu Apr 5 22:55:43 UTC 2012 Responsible-Changed-Why: punt to maintainer. http://www.freebsd.org/cgi/query-pr.cgi?pr=166684 From owner-freebsd-wireless@FreeBSD.ORG Thu Apr 5 23:32:13 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 48477106564A for ; Thu, 5 Apr 2012 23:32:13 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pz0-f44.google.com (mail-pz0-f44.google.com [209.85.210.44]) by mx1.freebsd.org (Postfix) with ESMTP id 1C61E8FC17 for ; Thu, 5 Apr 2012 23:32:13 +0000 (UTC) Received: by dadz14 with SMTP id z14so7526772dad.17 for ; Thu, 05 Apr 2012 16:32:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:content-type; bh=0iSg4ZrY8fkGF9nhFykWGuMx4cyaYTe6l0eFeZ7yLJU=; b=sEoVH49ps1KiG5fw+SFG20b0za5h1WLnbgUJPWv5hFTzsmBxkPxgq+fOAYjU9qHvbH K0XcqecFZ4lJImVgvp8R1WYF2TvXNszQd1tAKvI4HF+V3tMS7W1QmaZYZzg4TZ4y9GGQ pnZViLtq25KS+wXGAZiFuRTLFkb5BW84O1N1tLiW1ZSK4hNuy00D9+p44CYkiJSxClHw vSf21o7q63K0a5bQYzZm20l2W+iJizh+xRAlIN2yCDver9Z+2eZu/eUsKea2tIwRHH6P fpTWyp3kztXscVTkaAqRezNR4khRUQSi7gkKRD3mh7uCCFDZHamdKi6c/xIb+y9H4bj0 YunA== MIME-Version: 1.0 Received: by 10.68.203.4 with SMTP id km4mr10637391pbc.53.1333668732854; Thu, 05 Apr 2012 16:32:12 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.77.5 with HTTP; Thu, 5 Apr 2012 16:32:12 -0700 (PDT) In-Reply-To: <201204052255.q35Mtqxk011937@freefall.freebsd.org> References: <201204052255.q35Mtqxk011937@freefall.freebsd.org> Date: Thu, 5 Apr 2012 16:32:12 -0700 X-Google-Sender-Auth: pBHHiajjo9VUFiy_2S1M29LovE8 Message-ID: From: Adrian Chadd To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: Re: kern/166684: [ath] [net80211] mgmtrate/mcastrate isn't updated based on the the BSS rate list X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 05 Apr 2012 23:32:13 -0000 .. if someone is looking for a simple project to get their feet wet with inside net80211, this would be it. :) Adrian On 5 April 2012 15:55, wrote: > Synopsis: [ath] [net80211] mgmtrate/mcastrate isn't updated based on the the BSS rate list > > Responsible-Changed-From-To: freebsd-bugs->freebsd-wireless > Responsible-Changed-By: adrian > Responsible-Changed-When: Thu Apr 5 22:55:43 UTC 2012 > Responsible-Changed-Why: > punt to maintainer. > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=166684 From owner-freebsd-wireless@FreeBSD.ORG Fri Apr 6 07:00:34 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 45BE41065670 for ; Fri, 6 Apr 2012 07:00:34 +0000 (UTC) (envelope-from nm.knife@gmail.com) Received: from mail-wi0-f178.google.com (mail-wi0-f178.google.com [209.85.212.178]) by mx1.freebsd.org (Postfix) with ESMTP id C4A678FC15 for ; Fri, 6 Apr 2012 07:00:33 +0000 (UTC) Received: by wibhq7 with SMTP id hq7so235222wib.13 for ; Fri, 06 Apr 2012 00:00:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=TAwZ7ZC2uEY5McDCWccIDBgOzPk4KdlSv8nFczVpIyQ=; b=mHp8yGiEG2psrflNDGPF1yS/cLknYAk8Hj2IzdNqaYYFcWj6V4rjgsUoXYleHgMJM3 JnHihpKNGrZCYTJcYmgoLv0RZSgthNo6b6LbBSXIYKUS5YYlXflo9bS7GV1GQn8ADWaK uZiUXCU83DEhTpwWMeTiWqXv6f0XqjIl/HPz9BlZnn3hohseZ3EsLrpWxgNRtMqcL75z SOh8xKFxV7VfOsPduZ63a/Fv5FLgs57NO6p+sQ/YMzybE700hf8oxER+oZ6eac15cTMD sI20RwUt8HJT8X0qfK84tAniL8Pm4QIs5YI/Hui5Z2dZbUGgYxvRNrLTWxrh+xyL0pag LhRg== MIME-Version: 1.0 Received: by 10.180.103.134 with SMTP id fw6mr20296854wib.0.1333695632965; Fri, 06 Apr 2012 00:00:32 -0700 (PDT) Received: by 10.227.58.68 with HTTP; Fri, 6 Apr 2012 00:00:32 -0700 (PDT) In-Reply-To: References: Date: Fri, 6 Apr 2012 00:00:32 -0700 Message-ID: From: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= To: Bernhard Schmidt Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 06 Apr 2012 07:00:34 -0000 Well I don't know what it is, but 1mbit was back again. I did some magic, changed my channel from 5 to 6, stopped and stared wlan0 and it went back into the 48 54 range. BTW I am pasting part of the log in case it is any help Apr 5 23:56:19 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rate 72 (txcnt=122 retrycnt=43) Apr 5 23:56:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rate 96 (txcnt=140 retrycnt=11) Apr 5 23:56:38 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rate 108 (txcnt=130 retrycnt=12) Apr 5 23:56:51 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rate 96 (txcnt=130 retrycnt=58) Apr 5 23:56:54 LGX sudo: alakazam : TTY=pts/0 ; PWD=/usr/home/alakazam ; USER=root ; COMMAND=/sbin/ifconfig -ht Apr 5 23:56:55 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rate 108 (txcnt=137 retrycnt=8) Apr 5 23:57:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rate 96 (txcnt=137 retrycnt=47) Apr 5 23:57:32 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rate 108 (txcnt=124 retrycnt=11) Apr 5 23:58:00 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rate 96 (txcnt=14 retrycnt=7) Apr 5 23:58:02 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rate 108 (txcnt=21 retrycnt=0) Also, is there a way to force 54mbits? I don't care for the extra little power it takes. I am disappointed, because I got the 3x3 antenna to avoid issues like this. Looks like I should have opted for the webcam. -- Lyubomir Grigorov (bgalakazam) From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 06:08:47 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CFE511065670 for ; Sat, 7 Apr 2012 06:08:47 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id A60548FC08 for ; Sat, 7 Apr 2012 06:08:47 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3367982pbc.13 for ; Fri, 06 Apr 2012 23:08:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:date:x-google-sender-auth:message-id:subject :from:to:content-type; bh=ITFF8M5d34UqTboXAqeBQy8j8/15/eV4BLKtp7ICYXc=; b=C4QgMphdz8G53a4/v7OPDRcWFgrS2xNTE9WJ7Y5rTME4HJIa4c/+5/utABnwGMkkD8 KjNQVfwxziIFGToUnjzZAqS5wmN26DZf50mqcgMR89YdyezrE9AZ7Km29j08DVduu9gp rivrcL5qM+4/FVvDNyE84cI+qneel6DwsnOZWiJUTpLzQF38JJTsLOBSztSxrod3OLEg 8gXZeb6QNGsMVcjfjc4Nqs1xV5Ft6qZeuB/sr2d6lVfMJQ62LyZrOR4s2gPYcgryFScW FsVNquY/MmMRvTR7zDgex667crtls/pe4CnVtseU72zP1lzR1dGHspufgg1MaXmGynhv 6nCQ== MIME-Version: 1.0 Received: by 10.68.194.1 with SMTP id hs1mr1630724pbc.6.1333778927062; Fri, 06 Apr 2012 23:08:47 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Fri, 6 Apr 2012 23:08:47 -0700 (PDT) Date: Fri, 6 Apr 2012 23:08:47 -0700 X-Google-Sender-Auth: q6GdE4-_EGdvGwM-vnnnTvRTfZ0 Message-ID: From: Adrian Chadd To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: request for testing: please test -head ath 11n stuff X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 06:08:47 -0000 Hi, I've just added some bits: * BAR TX handling; * RTS aggregation limitations for AR5416 (8K aggregates); * Fix duration and HT protection mode handling; * flip on HT protection mode (RTS) by default, configurable by 'htprotmode'. I'd appreciate it if users tested this code out. Next: re-working the power save queue handling stuff in ath(4). Adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 14:45:10 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 9499F1065675 for ; Sat, 7 Apr 2012 14:45:10 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-we0-f182.google.com (mail-we0-f182.google.com [74.125.82.182]) by mx1.freebsd.org (Postfix) with ESMTP id 749178FC0A for ; Sat, 7 Apr 2012 14:45:09 +0000 (UTC) Received: by wern13 with SMTP id n13so2487492wer.13 for ; Sat, 07 Apr 2012 07:45:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject :content-type:content-transfer-encoding; bh=iVi6Un0I6bDzIhSf+okeuYV77E916TBjXNqejzefMzE=; b=JUjx04G0n/7YW5ltKO8bp5v0XCJ4VCg+L9D7wwVdpc6spv3zWyditqqDUlvWtAl7Kv 3hJba4IeJVUeea4ZNEMOOkyV2+uc+96bgjCqHzwaJbrJZ9SNLGd+CzlVcTM2y9BBV+2z CVKRvu9xjEzx6W1C9nJHy8Xiu0MMiSz6xgepFY36C3NHlO8WV28Eh2hcY1m+JiPqJc77 4iEwUxhC3EL8hyYqeLEF+ebLz+0VE69cdW3gc7LSNUHJ/5FAuJdDaLnc5lWMEjhXoB/x qrbvZ2U3kt++28iTn6s0kTtiMXo5S8BoZo6tZQrSL8E5+BzvgvFtjS4TFhSWNEscUqvL /GJA== Received: by 10.216.138.5 with SMTP id z5mr937093wei.27.1333809908636; Sat, 07 Apr 2012 07:45:08 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id b3sm15130736wib.4.2012.04.07.07.45.07 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 07:45:07 -0700 (PDT) Message-ID: <4F8052EB.5090007@gmail.com> Date: Sat, 07 Apr 2012 15:44:59 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 14:45:10 -0000 Hello, I tried a atheros chipset pcmcia NEC Aterm WL54AG card in my ThinkPad running head & found the driver doesn't attach, I built a new kernel with ATH_DEBUG, AH_DEBUG & ATH_DIAGAPI options set & set hw.ath.hal.debug to 0xffffffff in /boot/loader.conf (based on advice found in the archive of this list to other people experiencing issues). src was updated earlier today before kernel was rebuilt. output from pciconf none2@pci0:6:0:0: class=0x020000 card=0x8139821f chip=0x0013168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'Atheros AR5001X+ Wireless Network Adapter' class = network subclass = ethernet on inserting card, kernel reports: unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: cardbus0: Warning: Bogus CIS ignored found-> vendor=0x168c, dev=0x0013, revid=0x01 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 ath0: irq 16 at device 0.0 on cardbus0 pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0 ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff ar5212Attach: sc 0xffffff80053f9000 st 0x1 sh 0xfffffe00d4000000 ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212ChipTest: address test failed addr: 0x00008000 - wr:0x00000000 != rd:0xffffffff ar5212Attach: hardware self-test failed ar5212Detach: Detaching Ani ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212MacStop:Failed to stop the MAC state 0x6 ar5212SetPowerMode: AWAKE -> FULL-SLEEP (set chip ) ath0: unable to attach hardware; HAL status 14 cbb0: Opening memory: device_attach: ath0 attach returned 6 Sevan From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 15:37:17 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4EF3C106566B for ; Sat, 7 Apr 2012 15:37:17 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 2167B8FC08 for ; Sat, 7 Apr 2012 15:37:17 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3677409pbc.13 for ; Sat, 07 Apr 2012 08:37:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=qaLed4ZJ2ERBWv0QGfKLcKGYIZgQUxZxM9tKol7ZY4k=; b=u+ygWXUSefBjMHvKja5sVET3VK03r4/TLWRZwU/fJHWQVjVW6LgrqJvSEyGLhUlICO yYXLEHTNTwyi3GDpoTEsjwUARAhv2M1hmeJ0sUEyh7z3EBOIex4VySYvinQpOQqssu2p V4c3G5hKsuZYK9k6d8+HxVzAvmElDwaYc+RGzkC4IhF1hD1ikl5ZVk8kiKN7bZ3CVZ1f R9AwIw4E9YFZmZWTP8OwgBNWKZw+8wsBcuRgCwul4WuUi1lol0OpHBuBv7MIJyp7iqhp Qwyryp6C5MtnnNK7036RG5galpPL62wJsO9euklyCqwRPa5EovFAB4lom3Taagw/ptKv tsyw== MIME-Version: 1.0 Received: by 10.68.131.69 with SMTP id ok5mr4639692pbb.78.1333813035977; Sat, 07 Apr 2012 08:37:15 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 08:37:15 -0700 (PDT) In-Reply-To: <4F8052EB.5090007@gmail.com> References: <4F8052EB.5090007@gmail.com> Date: Sat, 7 Apr 2012 08:37:15 -0700 X-Google-Sender-Auth: L37j4kkDPCR8-55wIid_jFPPLDQ Message-ID: From: Adrian Chadd To: "Sevan / Venture37" Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: freebsd-wireless@freebsd.org Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 15:37:17 -0000 Hi, Not waking the chip up tends to be that the wrong resources were allocated. Can you please post a verbose boot log from -HEAD and from a working kernel version (likely something like FreeBSD-7?) Adrian On 7 April 2012 07:44, Sevan / Venture37 wrote: > Hello, > I tried a atheros chipset pcmcia NEC Aterm WL54AG card in my ThinkPad > running head & found the driver doesn't attach, I built a new kernel with > ATH_DEBUG, AH_DEBUG & ATH_DIAGAPI options set & set hw.ath.hal.debug to > 0xffffffff in /boot/loader.conf (based on advice found in the archive of > this list to other people experiencing issues). > src was updated earlier today before kernel was rebuilt. > > output from pciconf > none2@pci0:6:0:0: =A0 =A0 =A0 class=3D0x020000 card=3D0x8139821f chip=3D0= x0013168c > rev=3D0x01 > hdr=3D0x00 > =A0 =A0vendor =A0 =A0 =3D 'Atheros Communications Inc.' > =A0 =A0device =A0 =A0 =3D 'Atheros AR5001X+ Wireless Network Adapter' > =A0 =A0class =A0 =A0 =A0=3D network > =A0 =A0subclass =A0 =3D ethernet > > > on inserting card, kernel reports: > > unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 > cbb0: Opening memory: > cbb0: Normal: 0xd4000000-0xd400ffff > cardbus0: Expecting link target, got 0xff > cbb0: Opening memory: > pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of > pci0:6:0:0 > unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 > cbb0: Opening memory: > cbb0: Normal: 0xd4000000-0xd400ffff > cardbus0: Expecting link target, got 0xff > cbb0: Opening memory: > cardbus0: Warning: Bogus CIS ignored > found-> vendor=3D0x168c, dev=3D0x0013, revid=3D0x01 > =A0 =A0 =A0 =A0domain=3D0, bus=3D6, slot=3D0, func=3D0 > =A0 =A0 =A0 =A0class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 > =A0 =A0 =A0 =A0cmdreg=3D0x0002, statreg=3D0x8210, cachelnsz=3D0 (dwords) > =A0 =A0 =A0 =A0lattimer=3D0x00 (0 ns), mingnt=3D0x0a (2500 ns), maxlat=3D= 0x1c (7000 ns) > =A0 =A0 =A0 =A0intpin=3Da, irq=3D16 > =A0 =A0 =A0 =A0powerspec 2 =A0supports D0 D3 =A0current D0 > ath0: irq 16 at device 0.0 on cardbus0 > pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0 > ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 > cbb0: Opening memory: > cbb0: Normal: 0xd4000000-0xd400ffff > ar5212Attach: sc 0xffffff80053f9000 st 0x1 sh 0xfffffe00d4000000 > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212ChipTest: address test failed addr: 0x00008000 - wr:0x00000000 !=3D > rd:0xffffffff > ar5212Attach: hardware self-test failed > ar5212Detach: > Detaching Ani > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) > ar5212MacStop:Failed to stop the MAC state 0x6 > ar5212SetPowerMode: AWAKE -> FULL-SLEEP (set chip ) > ath0: unable to attach hardware; HAL status 14 > cbb0: Opening memory: > device_attach: ath0 attach returned 6 > > > Sevan > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g" From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 16:12:30 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 6DC46106566C for ; Sat, 7 Apr 2012 16:12:30 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-wi0-f178.google.com (mail-wi0-f178.google.com [209.85.212.178]) by mx1.freebsd.org (Postfix) with ESMTP id BD2778FC0C for ; Sat, 7 Apr 2012 16:12:29 +0000 (UTC) Received: by wibhq7 with SMTP id hq7so1080575wib.13 for ; Sat, 07 Apr 2012 09:12:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=SycjILUZXWyt1uhgBytZEKZOpG3GKjziy2Jbf6uhqUs=; b=mNvypI/JygJqfqB1KBtsxBKorzI2tyOfqJYQIdCaiywsFW+FU31C3PYYJ+CZt8cmKw QpuBeq4aAAwhaM4PH0rNdYiI609dknKnDbf/3QbC3Ret4gOHKS4X9LZK4nJgZqwdy4T1 gkvCvj6S9hKUPshI1HV67HnlUBsJ7LaGzeAuc7Tbjgo9DWcJAYtX6rv+MoYWpLleyjKk es/WfZNFnzmpVkUBeWMbrik1CVnFQ46+2Rthczu0pfU9wuBiYg6cywW9yD29MJ5Lf3sK o4hPQVgvRLPR9dnOxsk2kVARndLjjgbC/JysBdkc1Ogf/Wo/c6jDYwSZNZ255odOehzX j+nA== Received: by 10.180.104.65 with SMTP id gc1mr3897242wib.13.1333815142926; Sat, 07 Apr 2012 09:12:22 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id o2sm25321213wiv.11.2012.04.07.09.12.20 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 09:12:21 -0700 (PDT) Message-ID: <4F806763.7040404@gmail.com> Date: Sat, 07 Apr 2012 17:12:19 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 16:12:30 -0000 On 07/04/2012 16:37, Adrian Chadd wrote: > Hi, > > Not waking the chip up tends to be that the wrong resources were allocated. > > Can you please post a verbose boot log from -HEAD and from a working > kernel version (likely something like FreeBSD-7?) > > > Adrian Below is the output from -HEAD (personally identifiable info stripped) Will get on with building a v7.x kernel now Table 'FACP' at 0xbf6bd300 Table 'SSDT' at 0xbf6bd4b4 Table 'ECDT' at 0xbf6cba38 Table 'TCPA' at 0xbf6cba8a Table 'APIC' at 0xbf6cbabc APIC: Found table at 0xbf6cbabc APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #4: Sat Apr 7 15:12:22 BST 2012 :/usr/obj/usr/src/sys/THINKPAD amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff817e6000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff817e6298. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff817e6980. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff817e6ff0. Preloaded elf obj module "/boot/kernel/acpi_ibm.ko" at 0xffffffff817e7050. Preloaded elf obj module "/boot/kernel/sem.ko" at 0xffffffff817e76c0. Calibrating TSC clock ... TSC clock: 1596039720 Hz CPU: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz (1596.04-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x000000000181b000 - 0x00000000bf6affff, 3186184192 bytes (777877 pages) 0x0000000100000000 - 0x000000022b2f8fff, 5019504640 bytes (1225465 pages) avail memory = 8152399872 (7774 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x098000-0x098fff at 0xffffff8000222000 x86bios: EBDA 0x09d000-0x09ffff at 0xfffffe000009d000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf6950 00024 (v02 LENOVO) ACPI: XSDT 0xbf6bd1b7 0009C (v01 LENOVO TP-7V 00002220 LTP 00000000) ACPI: FACP 0xbf6bd300 000F4 (v03 LENOVO TP-7V 00002220 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120320/tbfadt-580) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120320/tbfadt-610) ACPI: DSDT 0xbf6bd6db 0E35D (v01 LENOVO TP-7V 00002220 MSFT 03000000) ACPI: FACS 0xbf6e4000 00040 ACPI: SSDT 0xbf6bd4b4 00227 (v01 LENOVO TP-7V 00002220 MSFT 03000000) ACPI: ECDT 0xbf6cba38 00052 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: TCPA 0xbf6cba8a 00032 (v02 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: APIC 0xbf6cbabc 00068 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: MCFG 0xbf6cbb24 0003C (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: HPET 0xbf6cbb60 00038 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: SLIC 0xbf6cbb98 00176 (v01 LENOVO TP-7V 00002220 SLIC 00000000) ACPI: SLAC 0xbf6cbdf0 00176 (v01 LENOVO TP-7V 00002220 LTP 00000000) ACPI: BOOT 0xbf6cbf66 00028 (v01 LENOVO TP-7V 00002220 LTP 00000001) ACPI: ASF! 0xbf6cbf8e 00072 (v16 LENOVO TP-7V 00002220 PTL 00000001) ACPI: SSDT 0xbf6e2697 0025F (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e28f6 000A6 (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e299c 004F7 (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e2e93 001D8 (v01 LENOVO TP-7V 00002220 INTL 20050513) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: null: VESA: INT 0x10 vector 0xc000:0x0014 VESA: information block 0000 56 45 53 41 00 03 00 01 00 99 01 00 00 00 40 00 0010 00 99 77 00 00 01 3d 01 00 99 4f 01 00 99 7d 01 0020 00 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040 60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01 0050 68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01 0060 70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 0070 07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 0080 15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 49 6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d 0110 39 36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69 0120 63 73 20 43 68 69 70 20 41 63 63 65 6c 65 72 61 0130 74 65 64 20 56 47 41 20 42 49 4f 53 00 49 6e 74 0140 65 6c 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 49 0150 6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d 39 0160 36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69 63 0170 73 20 43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72 0180 64 77 61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e 0190 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 12 mode(s) found VESA: v3.0, 7616k memory, flags:0x1, mode table:0xffffff800025f040 (99000040) VESA: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Intel(r)GM965/PM965/GL960 Graphics Controller Hardware Version 0.0 io: random: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 CPU0: local APIC error 0x40 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: on acpi0 ACPI: SSDT 0xbf6e1b32 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 0xbf6e1e39 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) cpu1: on acpi0 ACPI: SSDT 0xbf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 0xbf6e1db4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 51 Event timer "RTC" frequency 32768 Hz quality 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 Validation 0 10 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xd4000-0xd7fff pcib0: decoding 3 range 0xd8000-0xdbfff pcib0: decoding 3 range 0xdc000-0xdffff pcib0: decoding 3 range 0xc0000000-0xfebfffff pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a02, revid=0x0c domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf8000000, size 20, enabled pcib0: allocated type 3 (0xf8000000-0xf80fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: allocated type 4 (0x1800-0x1807) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a03, revid=0x0c domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf8100000, size 20, enabled pcib0: allocated type 3 (0xf8100000-0xf81fffff) for rid 10 of pci0:0:2:1 found-> vendor=0x8086, dev=0x1049, revid=0x03 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf8200000, size 17, enabled pcib0: allocated type 3 (0xf8200000-0xf821ffff) for rid 10 of pci0:0:25:0 map[14]: type Memory, range 32, base 0xf8225000, size 12, enabled pcib0: allocated type 3 (0xf8225000-0xf8225fff) for rid 14 of pci0:0:25:0 map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: allocated type 4 (0x1840-0x185f) for rid 18 of pci0:0:25:0 pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2834, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: allocated type 4 (0x1860-0x187f) for rid 20 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: allocated type 4 (0x1880-0x189f) for rid 20 of pci0:0:26:1 pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8426c00, size 10, enabled pcib0: allocated type 3 (0xf8426c00-0xf8426fff) for rid 10 of pci0:0:26:7 pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf8220000, size 14, enabled pcib0: allocated type 3 (0xf8220000-0xf8223fff) for rid 10 of pci0:0:27:0 pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283f, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2841, revid=0x03 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2830, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: allocated type 4 (0x18a0-0x18bf) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2831, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: allocated type 4 (0x18c0-0x18df) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2836, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8427000, size 10, enabled pcib0: allocated type 3 (0xf8427000-0xf84273ff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2448, revid=0xf3 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2811, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1 map[20]: type I/O Port, range 32, base 0x18e0, size 4, enabled pcib0: allocated type 4 (0x18e0-0x18ef) for rid 20 of pci0:0:31:1 found-> vendor=0x8086, dev=0x2829, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type I/O Port, range 32, base 0x1c30, size 3, enabled pcib0: allocated type 4 (0x1c30-0x1c37) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x1c24, size 2, enabled pcib0: allocated type 4 (0x1c24-0x1c27) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x1c28, size 3, enabled pcib0: allocated type 4 (0x1c28-0x1c2f) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x1c20, size 2, enabled pcib0: allocated type 4 (0x1c20-0x1c23) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled pcib0: allocated type 4 (0x1c00-0x1c1f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xf8426000, size 11, enabled pcib0: allocated type 3 (0xf8426000-0xf84267ff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283e, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf8427400, size 8, enabled pcib0: allocated type 3 (0xf8427400-0xf84274ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0x1c40, size 5, enabled pcib0: allocated type 4 (0x1c40-0x1c5f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 23 vgapci0: port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: mem 0xf8100000-0xf81fffff at device 2.1 on pci0 em0: port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: bpf attached em0: Ethernet address: 00:1d:72: uhci0: port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: port 0x1880-0x189f irq 21 at device 26.1 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53 usbus1 on uhci1 usbus1: bpf attached uhci1: usbpf: Attached ehci0: mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: bpf attached ehci0: usbpf: Attached hdac0: mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 55 hdac0: using IRQ 257 for MSI hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib1: irq 20 at device 28.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xf4000000-0xf5ffffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xf8500000-0xf85fffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf4000000-0xf5ffffff pcib1: prefetched decode 0xf8500000-0xf85fffff pci2: on pcib1 pci2: domain=0, physical bus=2 pcib2: irq 21 at device 28.1 on pci0 pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib2 pcib0: allocated type 3 (0xf6000000-0xf7ffffff) for rid 20 of pcib2 pcib0: allocated type 3 (0xf8600000-0xf86fffff) for rid 24 of pcib2 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf8600000-0xf86fffff pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit map[10]: type Memory, range 32, base 0xf7f00000, size 16, enabled pcib2: allocated memory range (0xf7f00000-0xf7f0ffff) for rid 10 of pci0:3:0:0 pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci3: at device 0.0 (no driver attached) uhci2: port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 56 usbus3 on uhci2 usbus3: bpf attached uhci2: usbpf: Attached uhci3: port 0x18c0-0x18df irq 17 at device 29.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57 usbus4 on uhci3 usbus4: bpf attached uhci3: usbpf: Attached ehci1: mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: bpf attached ehci1: usbpf: Attached pcib3: at device 30.0 on pci0 pcib0: allocated type 4 (0x4000-0x7fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xd4000000-0xd7efffff) for rid 20 of pcib3 pcib0: allocated type 3 (0xd8000000-0xdbffffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 5 pcib3: subordinate bus 8 pcib3: I/O decode 0x4000-0x7fff pcib3: memory decode 0xd4000000-0xd7efffff pcib3: prefetched decode 0xd8000000-0xdbffffff pcib3: Subtractively decoded bridge. pci5: on pcib3 pci5: domain=0, physical bus=5 found-> vendor=0x1180, dev=0x0476, revid=0xba domain=0, bus=5, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7eff000, size 12, enabled pcib3: allocated memory range (0xd7eff000-0xd7efffff) for rid 10 of pci0:5:0:0 pcib3: matched entry for 5.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1180, dev=0x0832, revid=0x04 domain=0, bus=5, slot=0, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe800, size 11, enabled pcib3: allocated memory range (0xd7efe800-0xd7efefff) for rid 10 of pci0:5:0:1 pcib3: matched entry for 5.0.INTB pcib3: slot 0 INTB hardwired to IRQ 17 found-> vendor=0x1180, dev=0x0822, revid=0x21 domain=0, bus=5, slot=0, func=2 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe400, size 8, enabled pcib3: allocated memory range (0xd7efe400-0xd7efe4ff) for rid 10 of pci0:5:0:2 pcib3: matched entry for 5.0.INTC pcib3: slot 0 INTC hardwired to IRQ 18 cbb0: mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci5 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x09000000 0x00f00000 0x00000005 0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000 0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xd7efe800-0xd7efefff irq 17 at device 0.1 on pci5 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:1d:72:ff: fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:1d:72: fwe0: bpf attached fwe0: Ethernet address: 02:1d:72: fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:1d:72:ff: @ 0xfffe00000000, S400, maxrec 2048 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1824000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: mem 0xd7efe400-0xd7efe4ff irq 18 at device 0.2 on pci5 sdhci0-slot0: 33MHz HS 4bits 3.3V DMA sdhci0-slot0: ============== REGISTER DUMP ============== sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x00000400 sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000000 sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci0-slot0: Caps: 0x01e021a1 | Max curr: 0x00000040 sdhci0-slot0: =========================================== sdhci0: 1 slot(s) allocated ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 59 mmc0: on sdhci0 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 ata0: at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 60 ahci0: port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (4 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 61 ahci0: using IRQ 258 for MSI ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 3ports ahci0: Caps2: ahcich0: at channel 0 on ahci0 ahcich0: Caps: ahcich1: not probed (disabled) ahcich2: not probed (disabled) pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 63 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: on acpi0 acpi_acad0: on acpi0 acpi_ibm0: on acpi0 acpi0: wakeup code va 0xffffff822d9db000 pa 0x94000 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 3 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 3 of orm0 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices ctl: CAM Target Layer loaded est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 procfs registered ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. hdacc0: at cad 0 on hdac0 hdacc0: Root Node at nid=0: 1 subnodes 1-1 hdaa0: at nid 1 on hdacc0 hdaa0: Audio Function Group at nid=1: 37 subnodes 2-38 hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: input state=0 hdaa0: GPIO2: disabled hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00090801 hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 0421401f 1 15 Headphones Jack 1/8 Right Green 0 hdaa0: 18 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 19 511301f0 15 0 Speaker None ATAPI 0x11 Unknown 1 hdaa0: 20 04a15021 2 1 Mic Jack 1/8 Right Red 0 hdaa0: 21 90a7012e 2 14 Mic Fixed Analog Internal Unknown 1 hdaa0: 22 593301f0 15 0 CD None ATAPI Onboard Unknown 1 hdaa0: 23 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 hdaa0: 24 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 hdaa0: 26 91f311f0 15 0 Other Fixed ATAPI 0x11 Black 1 hdaa0: 27 614411f0 15 0 SPDIF-out None RCA Ext-Rear Black 1 hdaa0: 28 21a15020 2 0 Mic Jack 1/8 Ext-Rear Red 0 hdaa0: Patching widget caps nid=26 0x00400000 -> 0x00700000 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 0421401f 1 15 Headphones Jack 1/8 Right Green 0 hdaa0: 18 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 19 511301f0 15 0 Speaker None ATAPI 0x11 Unknown 1 DISA hdaa0: 20 04a15021 2 1 Mic Jack 1/8 Right Red 0 hdaa0: 21 90a7012e 2 14 Mic Fixed Analog Internal Unknown 1 hdaa0: 22 593301f0 15 0 CD None ATAPI Onboard Unknown 1 DISA hdaa0: 23 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 DISA hdaa0: 24 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 DISA hdaa0: 27 614411f0 15 0 SPDIF-out None RCA Ext-Rear Black 1 DISA hdaa0: 28 21a15020 2 0 Mic Jack 1/8 Ext-Rear Red 0 hdaa0: 2 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=18 seq=0 hdaa0: Pin nid=17 seq=15 hdaa0: Association 1 (2) in: hdaa0: Pin nid=28 seq=0 hdaa0: Pin nid=20 seq=1 hdaa0: Pin nid=21 seq=14 hdaa0: Tracing association 0 (1) hdaa0: Pin 18 traced to DAC 4 hdaa0: Pin 17 traced to DAC 4 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (2) hdaa0: Unable to trace pin 28 to ADC 5, undo traces hdaa0: Unable to trace pin 28 to ADC 6, undo traces hdaa0: Pin 28 traced to ADC 8 hdaa0: Pin 20 traced to ADC 8 hdaa0: Pin 21 traced to ADC 8 hdaa0: Association 1 (2) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional ADC for association 1 (2) hdaa0: ADC 9 considered equal to ADC 8 hdaa0: Tracing input monitor hdaa0: Tracing nid 32 to out hdaa0: nid 32 is input monitor hdaa0: Tracing other input monitors hdaa0: Tracing nid 20 to out hdaa0: Tracing nid 21 to out hdaa0: Tracing nid 28 to out hdaa0: Tracing beeper hdaa0: Headphones redirection for association 0 nid=17 using unsolicited responses. hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdaa0: hdaa0: +-------------------+ hdaa0: | DUMPING HDA NODES | hdaa0: +-------------------+ hdaa0: hdaa0: Default Parameter hdaa0: ----------------- hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: IN amp: 0x80000000 hdaa0: OUT amp: 0x00052727 hdaa0: hdaa0: nid: 2 [DISABLED] hdaa0: Name: audio output hdaa0: Widget cap: 0x00030311 hdaa0: DIGITAL STEREO hdaa0: Stream cap: 0x00000005 hdaa0: AC3 PCM hdaa0: PCM cap: 0x000e07e0 hdaa0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdaa0: connections: 3 hdaa0: | hdaa0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected) hdaa0: + <- nid=8 [audio input] hdaa0: + <- nid=9 [audio input] hdaa0: hdaa0: nid: 3 [DISABLED] hdaa0: Name: audio output hdaa0: Widget cap: 0x00000405 hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Output amp: 0x00052727 hdaa0: mute=0 step=39 size=5 offset=39 hdaa0: hdaa0: nid: 4 hdaa0: Name: audio output hdaa0: Widget cap: 0x00000405 hdaa0: PWR STEREO hdaa0: Association: 0 (0x00008001) hdaa0: OSS: pcm (pcm) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Output amp: 0x00052727 hdaa0: mute=0 step=39 size=5 offset=39 hdaa0: hdaa0: nid: 5 [DISABLED] hdaa0: Name: audio input hdaa0: Widget cap: 0x0010050b hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Input amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=23 [pin: Mic (None)] [DISABLED] hdaa0: hdaa0: nid: 6 [DISABLED] hdaa0: Name: audio input hdaa0: Widget cap: 0x0010050b hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Input amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED] hdaa0: hdaa0: nid: 7 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Association: 0 (0x00008000) hdaa0: OSS: pcm, mix hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=34 [audio selector] hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 8 hdaa0: Name: audio input hdaa0: Widget cap: 0x00100501 hdaa0: PWR STEREO hdaa0: Association: 1 (0x00004003) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=12 [audio selector] hdaa0: hdaa0: nid: 9 hdaa0: Name: audio input hdaa0: Widget cap: 0x00100501 hdaa0: PWR STEREO hdaa0: Association: 1 (0x00004003) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=13 [audio selector] hdaa0: hdaa0: nid: 10 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Association: 0 (0x00000001) hdaa0: OSS: pcm, mix hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=4 [audio output] hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 11 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=15 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 12 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: line, mic, mix, monitor hdaa0: Output amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=32 [audio mixer] (selected) hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 13 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: line, mic, mix, monitor hdaa0: Output amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=32 [audio mixer] hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 14 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 15 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 16 hdaa0: Name: beep widget hdaa0: Widget cap: 0x0070000c hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker (speaker) hdaa0: Output amp: 0x800b0f0f hdaa0: mute=1 step=15 size=11 offset=15 hdaa0: hdaa0: nid: 17 hdaa0: Name: pin: Headphones (Green Jack) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Association: 0 (0x00008000) hdaa0: Pin cap: 0x0000001f hdaa0: ISC TRQD PDC HP OUT hdaa0: Pin config: 0x0421401f hdaa0: Pin control: 0x000000c0 HP OUT hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=7 [audio mixer] hdaa0: hdaa0: nid: 18 hdaa0: Name: pin: Speaker (Fixed) hdaa0: Widget cap: 0x0040058d hdaa0: PWR UNSOL STEREO hdaa0: Association: 0 (0x00000001) hdaa0: Pin cap: 0x0001001f hdaa0: ISC TRQD PDC HP OUT EAPD hdaa0: Pin config: 0x90170110 hdaa0: Pin control: 0x00000040 OUT hdaa0: EAPD: 0x00000002 hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=10 [audio mixer] hdaa0: hdaa0: nid: 19 [DISABLED] hdaa0: Name: pin: Speaker (None) hdaa0: Widget cap: 0x0040050c hdaa0: PWR hdaa0: Pin cap: 0x00010010 hdaa0: OUT EAPD hdaa0: Pin config: 0x511301f0 hdaa0: Pin control: 0x00000000 hdaa0: EAPD: 0x00000002 hdaa0: Output amp: 0x80051f1f hdaa0: mute=1 step=31 size=5 offset=31 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=31 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 20 hdaa0: Name: pin: Mic (Red Jack) hdaa0: Widget cap: 0x0040008b hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00000002) hdaa0: OSS: mic (mic) hdaa0: Pin cap: 0x00003727 hdaa0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x04a15021 hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: hdaa0: nid: 21 hdaa0: Name: pin: Mic (Fixed) hdaa0: Widget cap: 0x0040008b hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00004000) hdaa0: OSS: monitor (monitor) hdaa0: Pin cap: 0x00003727 hdaa0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x90a7012e hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: hdaa0: nid: 22 [DISABLED] hdaa0: Name: pin: CD (None) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Pin cap: 0x00000037 hdaa0: ISC TRQD PDC OUT IN hdaa0: Pin config: 0x593301f0 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=11 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 23 [DISABLED] hdaa0: Name: pin: Mic (None) hdaa0: Widget cap: 0x00400001 hdaa0: STEREO hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x55a601f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 24 [DISABLED] hdaa0: Name: pin: Mic (None) hdaa0: Widget cap: 0x00400001 hdaa0: STEREO hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x55a601f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 25 [DISABLED] hdaa0: Name: power widget hdaa0: Widget cap: 0x00500500 hdaa0: PWR hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=32 [audio mixer] (selected) hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 26 hdaa0: Name: beep widget hdaa0: Widget cap: 0x00700000 hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker (speaker) hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x91f311f0 hdaa0: Pin control: 0x00000020 IN hdaa0: hdaa0: nid: 27 [DISABLED] hdaa0: Name: pin: SPDIF-out (None) hdaa0: Widget cap: 0x0040030d hdaa0: DIGITAL STEREO hdaa0: Pin cap: 0x00000010 hdaa0: OUT hdaa0: Pin config: 0x614411f0 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80052727 hdaa0: mute=1 step=39 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=2 [audio output] [DISABLED] hdaa0: hdaa0: nid: 28 hdaa0: Name: pin: Mic (Red Jack) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: line (line) hdaa0: Pin cap: 0x00003737 hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x21a15020 hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=36 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 29 [DISABLED] hdaa0: Name: vendor widget hdaa0: Widget cap: 0x00f00100 hdaa0: connections: 25 hdaa0: | hdaa0: + <- nid=7 [audio mixer] (selected) hdaa0: + [DISABLED] <- nid=25 [power widget] [DISABLED] hdaa0: + <- nid=10 [audio mixer] hdaa0: + <- nid=11 [audio mixer] [DISABLED] hdaa0: + <- nid=12 [audio selector] hdaa0: + <- nid=13 [audio selector] hdaa0: + <- nid=14 [audio selector] [DISABLED] hdaa0: + <- nid=15 [audio selector] [DISABLED] hdaa0: + <- nid=26 [beep widget] hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: + <- nid=17 [pin: Headphones (Green Jack)] hdaa0: + <- nid=18 [pin: Speaker (Fixed)] hdaa0: + [DISABLED] <- nid=19 [pin: Speaker (None)] [DISABLED] hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=30 [audio mixer] [DISABLED] hdaa0: + <- nid=31 [audio mixer] [DISABLED] hdaa0: + <- nid=32 [audio mixer] hdaa0: + <- nid=33 [audio selector] hdaa0: + <- nid=34 [audio selector] hdaa0: + <- nid=35 [audio selector] [DISABLED] hdaa0: + <- nid=36 [audio mixer] [DISABLED] hdaa0: + <- nid=37 [audio selector] hdaa0: + <- nid=38 [vendor widget] [DISABLED] hdaa0: hdaa0: nid: 30 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=14 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 31 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200100 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=30 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 32 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x0020010b hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: mix (mix) hdaa0: Input amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=26 [beep widget] hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 33 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: -2 (0x00000000) hdaa0: OSS: mix hdaa0: Output amp: 0x80051f1f hdaa0: mute=1 step=31 size=5 offset=31 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=32 [audio mixer] hdaa0: hdaa0: nid: 34 hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: Association: 0 (0x00008000) hdaa0: OSS: pcm hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] [DISABLED] hdaa0: + <- nid=4 [audio output] (selected) hdaa0: hdaa0: nid: 35 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 36 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=35 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 37 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: line hdaa0: Output amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: hdaa0: nid: 38 [DISABLED] hdaa0: Name: vendor widget hdaa0: Widget cap: 0x00f00100 hdaa0: connections: 3 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: pcm0: at nid 18,17 and 28,20,21 on hdaa0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: DAC: 4 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: DAC: 8 pcm0: DAC: 9 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=18 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=10 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: nid=17 [pin: Headphones (Green Jack)] pcm0: | pcm0: + <- nid=7 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=34 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: pcm0: nid=8 [audio input] pcm0: | pcm0: + <- nid=12 [audio selector] [src: line, mic, mix, monitor] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: nid=9 [audio input] pcm0: | pcm0: + <- nid=13 [audio selector] [src: line, mic, mix, monitor] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=32 [audio mixer] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=26 [beep widget] [src: speaker] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol): -58/0dB pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 14 (nid 17 in ): mute pcm0: +- ctl 15 (nid 18 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm): -58/0dB pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: pcm0: Microphone Volume (OSS: mic): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 17 (nid 20 out): 0/30dB (4 steps) pcm0: +- ctl 24 (nid 32 in 0): -34/12dB (32 steps) + mute pcm0: pcm0: Microphone2 Volume (OSS: monitor): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 18 (nid 21 out): 0/30dB (4 steps) pcm0: +- ctl 25 (nid 32 in 1): -34/12dB (32 steps) + mute pcm0: pcm0: Line-in Volume (OSS: line): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 28 (nid 32 in 4): -34/12dB (32 steps) + mute pcm0: +- ctl 32 (nid 37 out): 0/30dB (4 steps) pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -34/0dB pcm0: | pcm0: +- ctl 13 (nid 16 out): -45/0dB (16 steps) + mute pcm0: +- ctl 27 (nid 32 in 3): -34/12dB (32 steps) + mute pcm0: pcm0: Recording Level (OSS: rec): -58/22dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: pcm0: Input Mix Level (OSS: mix): -46/0dB pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 29 (nid 33 out): -46/0dB (32 steps) + mute pcm0: pcm0: Input Monitoring Level (OSS: igain): 0/0dB pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap ba07000, 10000; 0xffffff822da07000 -> ba07000 pcm0: sndbuf_setmap ba47000, 10000; 0xffffff822da47000 -> ba47000 pcm0: sndbuf_setmap ba87000, 10000; 0xffffff822da87000 -> ba87000 pcm0: Automatically set rec source to: monitor hdacc1: at cad 1 on hdac0 hdacc1: Root Node at nid=0: 1 subnodes 2-2 unknown: at nid 2 on hdacc1 (no driver attached) mmc0: Probing bus usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found battery0: battery initialization start acpi_acad0: acline initialization start mmc0: SD probe: OK (OCR: 0x00ff8000) mmc0: Current OCR: 0x00ff8000 battery0: battery initialization done, tried 1 times mmc0: Probing cards acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times mmc0: New card detected (CID 035344534430314780209aeb3e005500) ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 mmc0: Card at relative address 32970 added: mmc0: card: SD (0x3/0x5344/"SD01G" rev 8.0 m/d 05.2005 s/n 209aeb3e) mmc0: bus: 4bit, 30MHz mmc0: memory: 1984000 blocks, erase sector 32 blocks mmc0: setting transfer rate to 30.000MHz mmcsd0: 968MB at mmc0 16MHz/4bit GEOM: new disk mmcsd0 mmc0: setting bus width to 4 bits GEOM_PART: partition 1 is not aligned on 16384 bytes pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: cardbus0: Warning: Bogus CIS ignored found-> vendor=0x168c, dev=0x0013, revid=0x01 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 ath0: irq 16 at device 0.0 on cardbus0 pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0 ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff ar5212Attach: sc 0xffffff800368d000 st 0x1 sh 0xfffffe00d4000000 ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerModeAwake: bogus SCR 0xffffffff, PCICFG 0x10014 ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212ChipTest: address test failed addr: 0x00008000 - wr:0x00000000 != rd:0xffffffff ar5212Attach: hardware self-test failed ar5212Detach: Detaching Ani ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212SetPowerMode: AWAKE -> AWAKE (set chip ) ar5212MacStop:Failed to stop the MAC state 0x2 ar5212SetPowerMode: AWAKE -> FULL-SLEEP (set chip ) ath0: unable to attach hardware; HAL status 14 cbb0: Opening memory: device_attach: ath0 attach returned 6 uhub2: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered ugen0.2: at usbus0 (probe0:ctl2cam0:0:1:0): Error 6, Unretryable error ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 GEOM: new disk ada0 ada0: ATA-8 SATA 2.x device ada0: Serial Number OCZ-0350VO37893A086L ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 pass0 at ahcich0 bus 0 scbus1 target 0 lun 0 pass0: ATA-8 SATA 2.x device pass0: Serial Number OCZ- pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 51 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 52 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 53 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 54 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 55 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 56 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 57 msi: Assigning MSI IRQ 256 to local APIC 1 vector 58 msi: Assigning MSI IRQ 257 to local APIC 1 vector 59 msi: Assigning MSI IRQ 258 to local APIC 1 vector 60 TSC timecounter disabled: C3 enabled. Timecounter "TSC" frequency 1596039720 Hz quality -1000 GEOM: ada0s4: invalid disklabel. Trying to mount root from zfs:tank []... start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex em0: link state changed to UP From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 18:59:19 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 34A61106566B for ; Sat, 7 Apr 2012 18:59:19 +0000 (UTC) (envelope-from nm.knife@gmail.com) Received: from mail-wg0-f50.google.com (mail-wg0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id ACEDC8FC15 for ; Sat, 7 Apr 2012 18:59:18 +0000 (UTC) Received: by wgbds12 with SMTP id ds12so3042375wgb.31 for ; Sat, 07 Apr 2012 11:59:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=kzh3kHr+BMmRM0GaiL8xVtDOCFwkyqzhbh0OMb6Y9Fw=; b=bVYNXXl1si4DyaRxuowQkAjZbJEa3jQdSSUoQ/2WAWNntrLF+9Vdub7rXswEBf9K4D 7xhD2hrJ4mqrwiEVZvf0LUXQ9udRNzeZq/EgJpNeEBqRSBu+7TdCrDKH1pJaPFmzCrpn X3OVHrdKLNloFeMWIkbCFciIIY2cqpkaNBRbqQcMQKtpqVYexg+UUO+wIxDZRSKHyiFm sGuqbyiS3los1vntRG7osp34dCgHtHD4u85oA2cDV8g0BNJbiD9WzHed1lZ0gsuBBHw8 u5z7MmWcGx1Op3/EPbMLnLnUNFX1peZQnzdQHkvewZBj1F9Tc8JHEXMi5RUoMrukgP9X 3aHA== MIME-Version: 1.0 Received: by 10.180.86.132 with SMTP id p4mr4632614wiz.15.1333825152514; Sat, 07 Apr 2012 11:59:12 -0700 (PDT) Received: by 10.227.58.68 with HTTP; Sat, 7 Apr 2012 11:59:12 -0700 (PDT) In-Reply-To: References: Date: Sat, 7 Apr 2012 11:59:12 -0700 Message-ID: From: =?windows-1251?B?y/7h7uzo8CDD8Ojj7vDu4g==?= To: Bernhard Schmidt Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-wireless@freebsd.org Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 18:59:19 -0000 Unfortunately, I am having problems in Windows 7 as well. I popped in the original HDD. Speedtest measures 1-2mbit when it should be 17-18mbit. I download very slow. Issue is not present with cable. I have tested on max performance with disable of all PCI-e energy saving. I have the latest BIOS 1.28. It's getting very annoying as it doesn't happen every time. =CD=E0 06 =E0=EF=F0=E8=EB 2012, 00:00, =CB=FE=E1=EE=EC=E8=F0 =C3=F0=E8=E3= =EE=F0=EE=E2 =ED=E0=EF=E8=F1=E0: > Well I don't know what it is, but 1mbit was back again. I did some magic, > changed my channel from 5 to 6, stopped and stared wlan0 and it went back > into the 48 54 range. BTW I am pasting part of the log in case it is any > help > > Apr 5 23:56:19 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rat= e > 72 (txcnt=3D122 retrycnt=3D43) > Apr 5 23:56:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rat= e > 96 (txcnt=3D140 retrycnt=3D11) > Apr 5 23:56:38 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rat= e > 108 (txcnt=3D130 retrycnt=3D12) > Apr 5 23:56:51 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rat= e > 96 (txcnt=3D130 retrycnt=3D58) > Apr 5 23:56:54 LGX sudo: alakazam : TTY=3Dpts/0 ; PWD=3D/usr/home/alakaza= m ; > USER=3Droot ; COMMAND=3D/sbin/ifconfig -ht > Apr 5 23:56:55 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rat= e > 108 (txcnt=3D137 retrycnt=3D8) > Apr 5 23:57:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rat= e > 96 (txcnt=3D137 retrycnt=3D47) > Apr 5 23:57:32 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rat= e > 108 (txcnt=3D124 retrycnt=3D11) > Apr 5 23:58:00 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing rat= e > 96 (txcnt=3D14 retrycnt=3D7) > Apr 5 23:58:02 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing rat= e > 108 (txcnt=3D21 retrycnt=3D0) > > > Also, is there a way to force 54mbits? I don't care for the extra little > power it takes. I am disappointed, because I got the 3x3 antenna to avoid > issues like this. Looks like I should have opted for the webcam. > > -- > Lyubomir Grigorov (bgalakazam) > > --=20 Lyubomir Grigorov (bgalakazam) From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 19:19:51 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 96B27106564A for ; Sat, 7 Apr 2012 19:19:51 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 63C688FC14 for ; Sat, 7 Apr 2012 19:19:51 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3781403pbc.13 for ; Sat, 07 Apr 2012 12:19:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:to:cc:reply-to:subject:in-reply-to:x-mailer :mime-version:content-type; bh=kvWtVeQXE7foetRhTt+kvXsVxomPJu7J51KD7IsM62Y=; b=OxGXxuHMUnSSxUekI7yy165iOoo82E2+gENhATWf9mnKNk3ZW4cirPe6KfNB89mjbH RlslR8CooG1ukHvlHpUYz7eUk2BRPXTihKdQqM1zipQl2xrdLq2miXQz96OnrpofTF6Z /cp1rud6loUZulN4WG42lXJ38PZ1MGiNgwvTuFQk54WdQ9czePaIDNg4OP/Ce8ALKIlJ M3JwVJozg6bDTgi4ENBMXJije7Ryt1Rkv0LznffWeRVvhcw+Ro7h6oOzmLHFTGqlsE2o Uc12ZKkHOXzlhAQ6v7zl1qvluqHZB1JgS8xro3jlqhEMyRBRaIbkFGmj5J1R5jlkyMvv 601g== Received: by 10.68.195.163 with SMTP id if3mr6303442pbc.127.1333826385318; Sat, 07 Apr 2012 12:19:45 -0700 (PDT) Received: from www.palm.com ([32.152.251.98]) by mx.google.com with ESMTPS id g8sm9899818pbo.25.2012.04.07.12.19.38 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 12:19:44 -0700 (PDT) Message-ID: <4f809350.0833440a.1b6f.fffff0be@mx.google.com> Date: Sat, 7 Apr 2012 12:19:44 -0700 From: "Adrian Chadd" To: "=?UTF-8?B?0JvRjtCx0L7QvNC40YAg0JPRgNC40LPQvtGA0L7Qsg==?=" , "Bernhard Schmidt" In-Reply-To: X-Mailer: Palm webOS v1.0.1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: "freebsd-wireless@freebsd.org" Subject: Re: Intel 1000-N is really slow X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Adrian Chadd List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 19:19:51 -0000 It sounds like local interference? Sent from my Palm Pre on AT&T On Apr 7, 2012 11:59 AM, =D0=9B=D1=8E=D0=B1=D0=BE=D0=BC=D0=B8=D1=80 =D0=93= =D1=80=D0=B8=D0=B3=D0=BE=D1=80=D0=BE=D0=B2 <nm.knife@gmail.com> wrote= :=20 Unfortunately, I am having problems in Windows 7 as well. I popped in the original HDD. Speedtest measures 1-2mbit when it should be 17-18mbit. I download very slow. Issue is not present with cable. I have tested on max performance with disable of all PCI-e energy saving. I have the latest BIOS 1.28. It's getting very annoying as it doesn't happen every time. =D0=9D=D0=B0 06 =D0=B0=D0=BF=D1=80=D0=B8=D0=BB 2012, 00:00, =D0=9B=D1=8E=D0= =B1=D0=BE=D0=BC=D0=B8=D1=80 =D0=93=D1=80=D0=B8=D0=B3=D0=BE=D1=80=D0=BE=D0= =B2 <nm.knife@gmail.com> =D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0: > Well I don't know what it is, but 1mbit was back again. I did some mag= ic, > changed my channel from 5 to 6, stopped and stared wlan0 and it went= back > into the 48 54 range. BTW I am pasting part of the log in case it is= any > help > > Apr 5 23:56:19 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing= rate > 72 (txcnt=3D122 retrycnt=3D43) > Apr 5 23:56:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing= rate > 96 (txcnt=3D140 retrycnt=3D11) > Apr 5 23:56:38 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing= rate > 108 (txcnt=3D130 retrycnt=3D12) > Apr 5 23:56:51 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing= rate > 96 (txcnt=3D130 retrycnt=3D58) > Apr 5 23:56:54 LGX sudo: alakazam : TTY=3Dpts/0 ; PWD=3D/usr/home/alak= azam ; > USER=3Droot ; COMMAND=3D/sbin/ifconfig -ht > Apr 5 23:56:55 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing= rate > 108 (txcnt=3D137 retrycnt=3D8) > Apr 5 23:57:25 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing= rate > 96 (txcnt=3D137 retrycnt=3D47) > Apr 5 23:57:32 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing= rate > 108 (txcnt=3D124 retrycnt=3D11) > Apr 5 23:58:00 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR decreasing= rate > 96 (txcnt=3D14 retrycnt=3D7) > Apr 5 23:58:02 LGX kernel: wlan0: [28:16:2e:da:02:f9] AMRR increasing= rate > 108 (txcnt=3D21 retrycnt=3D0) > > > Also, is there a way to force 54mbits? I don't care for the extra litt= le > power it takes. I am disappointed, because I got the 3x3 antenna to av= oid > issues like this. Looks like I should have opted for the webcam. > > -- > Lyubomir Grigorov (bgalakazam) > > --=20 Lyubomir Grigorov (bgalakazam) _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 19:30:36 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 7BC851065672 for ; Sat, 7 Apr 2012 19:30:36 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-we0-f182.google.com (mail-we0-f182.google.com [74.125.82.182]) by mx1.freebsd.org (Postfix) with ESMTP id 045A28FC08 for ; Sat, 7 Apr 2012 19:30:35 +0000 (UTC) Received: by wern13 with SMTP id n13so2591579wer.13 for ; Sat, 07 Apr 2012 12:30:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=Bizj20Y0R0YKCGVk1PW2mVp6W5/lpNDqAUWSUEjIMUQ=; b=zbVOmE8RzRqbNgRZskUl/x7uKVeUFAAD9zqVBg0XHhNUntgQsy1Bb0uAFI55MO/iob 5q2104fqUNp6vM3GaaxH4oVDrlHb7FvnlSl63GNOfclBoVEca9bRPmhwBTTIpi8q74HA wCkdgrvECOet1PDfoWBKdYqzm9ZXvyFLdgh/TtqpTWlQI6plB1V382GgJnXMGNSspzlS 6mjw6dBvKJdro6/xPBm2L3lzT0KYr3rmzGIdzftItDzIJdbHM4GxgCQyuRBzPWYXWJSs WrjMzeYVbL4RTwZtf1lfroPxcMm58/eAbB89sIDgUHguIw3idyXw2h7EUDY2cHWUCfeI +3rQ== Received: by 10.180.80.9 with SMTP id n9mr4808585wix.4.1333827034869; Sat, 07 Apr 2012 12:30:34 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id fl2sm22479208wib.2.2012.04.07.12.30.33 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 12:30:34 -0700 (PDT) Message-ID: <4F8095D8.5020701@gmail.com> Date: Sat, 07 Apr 2012 20:30:32 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> In-Reply-To: <4F806763.7040404@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 19:30:36 -0000 On 07/04/2012 17:12, Sevan / Venture37 wrote: > Below is the output from -HEAD (personally identifiable info stripped) > Will get on with building a v7.x kernel now Unable to build 7.4 kernel, the linux32 module fails with assembler errors so I tried the livefs iso images for 7.3, 7.4 & 8.3-RC2, upon inserting card the system panics on all 3 live environments. Sevan From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 19:49:51 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D976B106566B for ; Sat, 7 Apr 2012 19:49:51 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 726338FC12 for ; Sat, 7 Apr 2012 19:49:51 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3794472pbc.13 for ; Sat, 07 Apr 2012 12:49:51 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=fom22UbHJ07dNNXpkSI9qOsvkPtHm67JUzmBjuWM0FY=; b=g7uyHqK+F9I3DZ9UqqlARiu9k+qULv7JQ4laKtfMzfmFlvKm+aB0B7wakt7gzFJNFL ENMCi2Cvncf+49cBF33uHAd4/SPuL6PrHzKHgOxu76wIuhG81WpI3dwXwXtpk5dnZ7dK 0eKHYyXPeiZKJ4c845Adp9XkBYLl6pxtj1n9+dsBiPviXlNJRyJf5ejIGmeqf5gURhNR n5fjWZpiwl8TubqzHmieqovwPjmpcZApkp5v0chY1xXObWLkk3z0jAcHaGKE9o19D73a BCxZ3AZxnnbyrAIXDCE8guZIjDAKuSLjJNqugQcRcDM9TtI0/1Jie5iaRVifLcAxaptH 5xPQ== MIME-Version: 1.0 Received: by 10.68.202.167 with SMTP id kj7mr6600985pbc.9.1333828191206; Sat, 07 Apr 2012 12:49:51 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 12:49:51 -0700 (PDT) In-Reply-To: <4F8095D8.5020701@gmail.com> References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> Date: Sat, 7 Apr 2012 12:49:51 -0700 X-Google-Sender-Auth: e-xQ3YD0cB1AL12mddKW2Xkuw8I Message-ID: From: Adrian Chadd To: "Sevan / Venture37" Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-wireless@freebsd.org Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 19:49:51 -0000 On 7 April 2012 12:30, Sevan / Venture37 wrote: > On 07/04/2012 17:12, Sevan / Venture37 wrote: >> >> Below is the output from -HEAD (personally identifiable info stripped) >> Will get on with building a v7.x kernel now > > > Unable to build 7.4 kernel, the linux32 module fails with assembler errors > so I tried the livefs iso images for 7.3, 7.4 & 8.3-RC2, upon inserting card > the system panics on all 3 live environments. Can you please try a 32 bit live image? Adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:27:39 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B2BE4106564A for ; Sat, 7 Apr 2012 20:27:39 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 885FB8FC0A for ; Sat, 7 Apr 2012 20:27:39 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3809950pbc.13 for ; Sat, 07 Apr 2012 13:27:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:date:x-google-sender-auth:message-id:subject :from:to:content-type; bh=e+mnAcuINwK2yS9qQgQvJvfIgdYtpz923dv1sL21w1k=; b=tKOma0TufPKHD7rYPm3+A6bLTjHT7Gmog01mF1b+XZ5MuVXc//Y9u+hwmipFzKdfZU Q02GcJ6vD2QF74/u0OUqTkU+kaM6wDkJXQpGmXav9rK+ZuS36AI2Hz9AW+1mQZAkXeYa ReTX0tsrutDvTPcKxnhjvHT6GUDwEtBYiLWIN5cYiD59PJP9SXyiaUDbM4J2LrBU43UI 0quwO4EjnoAi2XXXt8YzaJfm8hSrk54c0r1lWL7AEM6hd8EEIJrHSEtLqYM1/1MsJ+sH xDb0mmId9Q/253CXWAJK7h+9nYUpl79oZr7jwQJ0a+PnnawAdhwHNWi0SJzNbByt3ycJ JlBQ== MIME-Version: 1.0 Received: by 10.68.194.1 with SMTP id hs1mr6643620pbc.6.1333830459013; Sat, 07 Apr 2012 13:27:39 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 13:27:39 -0700 (PDT) Date: Sat, 7 Apr 2012 13:27:39 -0700 X-Google-Sender-Auth: 0rpMj9-xNMn1dBregqeUpA5XHF8 Message-ID: From: Adrian Chadd To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: Now that I'm "done" with TX aggregation, now we need to figure out powersave handling.. X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:27:39 -0000 Hi all, Now that I've "finished" with the TX aggregation side of ath(4), I'd like to go and make power save support work (again). The problems: * the hacky logic I put into the ath(4) TX queue code is wrong and seems to cause lots of weird issues when a power save station comes along whilst some other 11n aggregation stuff is happening; * since the ath(4) driver now has a per-TID, per-node queue of frames, ps-poll and TIM updating just don't work as you'd expect. If a power save client wakes up and sends a ps-poll frame to the hostap right now, the only software queue net80211 has is the power save queue (psq) which frames are diverted to if they're queued whilst the station is in power save mode. However, this doesn't take into account frames in the software queue, nor does it try at all to deal with frames that were already in flight. In the legacy case that's "ok" as those frames would be dropped with no real state consequence (there'd be a hole in the sequence numbers, but that's ok for legacy operation.) But in 11n, we can't just drop frames in the TX queue. The other issue is that if there -are- frames in the software queue, those should be dequeued (as aggregates? I'm not sure) before frames on the net80211 psq should be dequeued. Similarly, the TIM needs to be updated with the state of the psq _and_ the per-TID, per-node software queue frames. On the other hand, the hardware gives us a few things to make this easier. If TX failures occur, the hardware (Dating back to the pre-11n NICs) will set a "destination filtered" bit somewhere; which prevents all further hardware queued frames from even being attempted. They'll immediately fail with a specific error. So for stations transitioning into power save mode, we won't waste air time trying to transmit frames when it just plain isn't working. Those frames can then be added to the beginning of the software queue and retried once the station comes out of power save mode. Right now all frames have the "clear destination mask bit" set in the TX descriptor. I can clear that bit, notice when frames fail, throw them back on the head of the software queue and retry them when the station comes back. We just tag the next frame with the "clear destination mask bit" in the TX descriptor so traffic starts again. So, in short - this is a bit of a mess to wade through. I'd appreciate some feedback/comments. My plan is to ignore this for the next couple of weeks and concentrate on bugfixing anything that leads to crashes, memory corruption and such. There's also a lot of codebase tidying up that I'd like to do, especially with the messy locking. But handling power save needs to be done.. Adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:29:03 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id DA6BD1065732 for ; Sat, 7 Apr 2012 20:29:03 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-we0-f182.google.com (mail-we0-f182.google.com [74.125.82.182]) by mx1.freebsd.org (Postfix) with ESMTP id 5EBDA8FC0A for ; Sat, 7 Apr 2012 20:29:03 +0000 (UTC) Received: by wern13 with SMTP id n13so2609301wer.13 for ; Sat, 07 Apr 2012 13:29:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=0YPjuC37cykrbJsH8eQyJiEDJJ0hd+a1gVbXzZdZM7g=; b=cD9RHqjyZo3xBWx+LriPX+Mfg5CW0y7eZR1fsCmPRqXqL6819dLT7LvCvE/q47FzkD SnUFaZV6/y6b9yPeTSuWKMk5oqTOS7/Dm2Is4MpKo3BHvMMKOUMSwKvH5TRYpQJmguU7 rQXoUVaid4TSGh2Y3FACSCV97KC+VtNDmWuBGbEPvQIGYOPN+13bhAv/XszehUT2be4X pI/Wf5VaBXP9LTqtHblMMHPOnyezMhbuMebHh7DxaFt9Zkdp0YTL/rHTIDr6yjDFHvX7 FumP/e+VigF8VTvy01I4AbtZGrgg46suVRfppszYVqcRITIonXq3eHEVEiFRipivptVm t1jw== Received: by 10.180.88.169 with SMTP id bh9mr5071135wib.5.1333830542542; Sat, 07 Apr 2012 13:29:02 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id ff9sm17236036wib.2.2012.04.07.13.29.01 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 13:29:01 -0700 (PDT) Message-ID: <4F80A38C.3080602@gmail.com> Date: Sat, 07 Apr 2012 21:29:00 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:29:03 -0000 On 07/04/2012 20:49, Adrian Chadd wrote: > Can you please try a 32 bit live image? > > > Adrian Same thing with 7.3 & 8.3 i386 live images. Sevan From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:31:17 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id A13BC1065670 for ; Sat, 7 Apr 2012 20:31:17 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pz0-f44.google.com (mail-pz0-f44.google.com [209.85.210.44]) by mx1.freebsd.org (Postfix) with ESMTP id 71CC98FC08 for ; Sat, 7 Apr 2012 20:31:17 +0000 (UTC) Received: by dadz14 with SMTP id z14so13631821dad.17 for ; Sat, 07 Apr 2012 13:31:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=+ZaU5kRUyP2dLscuFyhJV9bReC9mPwmfxNL9EeBE1qQ=; b=ErZT0KS6Gi25Z6IeH7Rvv/v5atwl4jhEIeJLQCAsYdXgiOuBvhNgNcXLQZGZ8UDFQr kQVPekJm9eCNBCYuT6E4LGdlHTMfevLGjRX+bzax1oXFmJEn8gNLaLfbFxNJLNzPFHLF 8ZfdTEouxyE27cqJP2dlDsuJjBWWpezzIzrdLJMDIRyACn8Ih2idx01zIl/ynwnyDHkO f8tmjTcDQlrYJi/dAwTKuw6wc9uwsGfZnMIgnSK0sBo3J3C44YYyXs2YYNBcntjYMmbY V9DiXziB3Aj3O6KtquTNaAXFhNSUOlWWeEximjjk3jmWAC+c7TN+23nAPV5kd1zfN9Ck Y/kQ== MIME-Version: 1.0 Received: by 10.68.129.133 with SMTP id nw5mr6184344pbb.159.1333830677273; Sat, 07 Apr 2012 13:31:17 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 13:31:17 -0700 (PDT) In-Reply-To: <4F80A38C.3080602@gmail.com> References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> Date: Sat, 7 Apr 2012 13:31:17 -0700 X-Google-Sender-Auth: -KSDOtAL56QoeNjrRYYA1Icn--4 Message-ID: From: Adrian Chadd To: "Sevan / Venture37" Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-wireless@freebsd.org Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:31:17 -0000 On 7 April 2012 13:29, Sevan / Venture37 wrote: > On 07/04/2012 20:49, Adrian Chadd wrote: >> >> Can you please try a 32 bit live image? > Same thing with 7.3 & 8.3 i386 live images. That's totally whacked. Ok, what about a 9.0 or -HEAD i386 live image? I have some thinkpad hardware here, but I haven't tried 64 bit images on it. Adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:48:32 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id C4364106566C for ; Sat, 7 Apr 2012 20:48:32 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-wi0-f172.google.com (mail-wi0-f172.google.com [209.85.212.172]) by mx1.freebsd.org (Postfix) with ESMTP id 2415F8FC08 for ; Sat, 7 Apr 2012 20:48:31 +0000 (UTC) Received: by wibhj6 with SMTP id hj6so1167422wib.13 for ; Sat, 07 Apr 2012 13:48:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=sQo/E3MM0BvDbULkf/S17xStHt1f3CT2ksybogT6A6I=; b=02v9wK3F3S9U0NWXOywa+C5/mnvpDcZ3Vqsz0L3X4Oa8kkThtldx1JWzcLqoKH7ZGl /6lK0IBaVkeRC1vz6aof3CIZ8p6Zuves57mK21hecJ7KpPvy/Xv76HSsFhg9bF8JhV7J 3dLjLhxLHxf1YG5aaA1bUq+zqmmlYZPialFeaTTnfY09Mh3MveV2zGAfpHy5ES7CufyN 3OPxh3lAmZCmB3sfZ1d/v/ZjlodzM74mRHwYGQQfkpfWG0gqayZEpaeVTaUlHG/+j3tI pPyS3SUu1NNbEPSK70sDv2lNSRzuCbu0kIhefuMRNdGFknB/YY1qGzLhO4pm7woCyHVk wstQ== Received: by 10.180.73.143 with SMTP id l15mr5045980wiv.11.1333831711149; Sat, 07 Apr 2012 13:48:31 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id o2sm27863333wiv.11.2012.04.07.13.48.29 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 13:48:30 -0700 (PDT) Message-ID: <4F80A81C.2070602@gmail.com> Date: Sat, 07 Apr 2012 21:48:28 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:48:32 -0000 On 07/04/2012 21:31, Adrian Chadd wrote: > That's totally whacked. Ok, what about a 9.0 or -HEAD i386 live image? > > I have some thinkpad hardware here, but I haven't tried 64 bit images on it. > > > Adrian dmesg output from 9.0-Release i386 live env but it appears to be incomplete, no panic though :) class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf8000000, size 20, enabled pcib0: allocated type 3 (0xf8000000-0xf80fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: allocated type 4 (0x1800-0x1807) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a03, revid=0x0c domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf8100000, size 20, enabled pcib0: allocated type 3 (0xf8100000-0xf81fffff) for rid 10 of pci0:0:2:1 found-> vendor=0x8086, dev=0x1049, revid=0x03 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf8200000, size 17, enabled pcib0: allocated type 3 (0xf8200000-0xf821ffff) for rid 10 of pci0:0:25:0 map[14]: type Memory, range 32, base 0xf8225000, size 12, enabled pcib0: allocated type 3 (0xf8225000-0xf8225fff) for rid 14 of pci0:0:25:0 map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: allocated type 4 (0x1840-0x185f) for rid 18 of pci0:0:25:0 pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2834, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: allocated type 4 (0x1860-0x187f) for rid 20 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: allocated type 4 (0x1880-0x189f) for rid 20 of pci0:0:26:1 pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8426c00, size 10, enabled pcib0: allocated type 3 (0xf8426c00-0xf8426fff) for rid 10 of pci0:0:26:7 pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf8220000, size 14, enabled pcib0: allocated type 3 (0xf8220000-0xf8223fff) for rid 10 of pci0:0:27:0 pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283f, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2841, revid=0x03 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2830, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: allocated type 4 (0x18a0-0x18bf) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2831, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: allocated type 4 (0x18c0-0x18df) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2836, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8427000, size 10, enabled pcib0: allocated type 3 (0xf8427000-0xf84273ff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2448, revid=0xf3 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2811, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1 map[20]: type I/O Port, range 32, base 0x18e0, size 4, enabled pcib0: allocated type 4 (0x18e0-0x18ef) for rid 20 of pci0:0:31:1 found-> vendor=0x8086, dev=0x2829, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type I/O Port, range 32, base 0x1c30, size 3, enabled pcib0: allocated type 4 (0x1c30-0x1c37) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x1c24, size 2, enabled pcib0: allocated type 4 (0x1c24-0x1c27) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x1c28, size 3, enabled pcib0: allocated type 4 (0x1c28-0x1c2f) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x1c20, size 2, enabled pcib0: allocated type 4 (0x1c20-0x1c23) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled pcib0: allocated type 4 (0x1c00-0x1c1f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xf8426000, size 11, enabled pcib0: allocated type 3 (0xf8426000-0xf84267ff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283e, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf8427400, size 8, enabled pcib0: allocated type 3 (0xf8427400-0xf84274ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0x1c40, size 5, enabled pcib0: allocated type 4 (0x1c40-0x1c5f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 23 vgapci0: port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: mem 0xf8100000-0xf81fffff at device 2.1 on pci0 em0: port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: bpf attached em0: Ethernet address: 00:1d:72: uhci0: port 0x1860-0x187f irq 20 at device 26.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 usbus0: on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: port 0x1880-0x189f irq 21 at device 26.1 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 usbus1: on uhci1 usbus1: bpf attached uhci1: usbpf: Attached ehci0: mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52 usbus2: EHCI version 1.0 usbus2: on ehci0 usbus2: bpf attached ehci0: usbpf: Attached hdac0: mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20100226_0142 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 53 hdac0: using IRQ 257 for MSI hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib1: irq 20 at device 28.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xf4000000-0xf5ffffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xf8500000-0xf85fffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf4000000-0xf5ffffff pcib1: prefetched decode 0xf8500000-0xf85fffff pci2: on pcib1 pci2: domain=0, physical bus=2 pcib2: irq 21 at device 28.1 on pci0 pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib2 pcib0: allocated type 3 (0xf6000000-0xf7ffffff) for rid 20 of pcib2 pcib0: allocated type 3 (0xf8600000-0xf86fffff) for rid 24 of pcib2 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf8600000-0xf86fffff pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit map[10]: type Memory, range 32, base 0xf7f00000, size 16, enabled pcib2: allocated memory range (0xf7f00000-0xf7f0ffff) for rid 10 of pci0:3:0:0 pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci3: at device 0.0 (no driver attached) uhci2: port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54 usbus3: on uhci2 usbus3: bpf attached uhci2: usbpf: Attached uhci3: port 0x18c0-0x18df irq 17 at device 29.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 55 usbus4: on uhci3 usbus4: bpf attached uhci3: usbpf: Attached ehci1: mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56 usbus5: EHCI version 1.0 usbus5: on ehci1 usbus5: bpf attached ehci1: usbpf: Attached pcib3: at device 30.0 on pci0 pcib0: allocated type 4 (0x4000-0x7fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xd4000000-0xd7efffff) for rid 20 of pcib3 pcib0: allocated type 3 (0xd8000000-0xdbffffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 5 pcib3: subordinate bus 8 pcib3: I/O decode 0x4000-0x7fff pcib3: memory decode 0xd4000000-0xd7efffff pcib3: prefetched decode 0xd8000000-0xdbffffff pcib3: Subtractively decoded bridge. pci5: on pcib3 pci5: domain=0, physical bus=5 found-> vendor=0x1180, dev=0x0476, revid=0xba domain=0, bus=5, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7eff000, size 12, enabled pcib3: allocated memory range (0xd7eff000-0xd7efffff) for rid 10 of pci0:5:0:0 pcib3: matched entry for 5.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1180, dev=0x0832, revid=0x04 domain=0, bus=5, slot=0, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe800, size 11, enabled pcib3: allocated memory range (0xd7efe800-0xd7efefff) for rid 10 of pci0:5:0:1 pcib3: matched entry for 5.0.INTB pcib3: slot 0 INTB hardwired to IRQ 17 found-> vendor=0x1180, dev=0x0822, revid=0x21 domain=0, bus=5, slot=0, func=2 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe400, size 8, enabled pcib3: allocated memory range (0xd7efe400-0xd7efe4ff) for rid 10 of pci0:5:0:2 pcib3: matched entry for 5.0.INTC pcib3: slot 0 INTC hardwired to IRQ 18 cbb0: mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci5 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x09000000 0x00f00000 0x00000005 0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000 0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xd7efe800-0xd7efefff irq 17 at device 0.1 on pci5 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:1d:72:ff: fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0xbc030000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:1d:72: fwe0: bpf attached fwe0: Ethernet address: 02:1d:72: fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:1d:72:ff: @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode pci5: at device 0.2 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 ata0: on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57 ahci0: port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (4 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 58 ahci0: using IRQ 258 for MSI ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 3ports ahci0: Caps2: ahcich0: at channel 0 on ahci0 ahcich0: Caps: pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 59 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 60 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 61 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 63 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: on acpi0 acpi_acad0: on acpi0 ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 3 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 3 of orm0 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 ata1 failed to probe at port 0x170 irq 15 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port found at 0x3bc ppc0: cannot reserve I/O port range ppc0: failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. procfs registered Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 hdac0: Probing codec #0... hdac0: HDA Codec #0: Analog Devices AD1984 hdac0: HDA Codec ID: 0x11d41984 hdac0: Vendor: 0x11d4 hdac0: Device: 0x1984 hdac0: Revision: 0x04 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x20ac17aa hdac0: Found audio FG nid=1 startnode=2 endnode=39 total=37 hdac0: Probing codec #1... hdac0: HDA Codec #1: Conexant (Unknown) hdac0: HDA Codec ID: 0x14f12bfa hdac0: Vendor: 0x14f1 hdac0: Device: 0x2bfa hdac0: Revision: 0x00 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x20ac17aa hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0x40000003 NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdac0: GHOST: nid=2 j=0 entnum=4 index=0 res=0x00090801 hdac0: nid 17 0x0421401f as 1 seq 15 Headphones Jack jack 1 loc 4 color Green misc 0 hdac0: nid 18 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 19 0x511301f0 as 15 seq 0 Speaker None jack 3 loc 17 color Unknown misc 1 hdac0: nid 20 0x04a15021 as 2 seq 1 Mic Jack jack 1 loc 4 color Red misc 0 hdac0: nid 21 0x90a7012e as 2 seq 14 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 22 0x593301f0 as 15 seq 0 CD None jack 3 loc 25 color Unknown misc 1 hdac0: nid 23 0x55a601f0 as 15 seq 0 Mic None jack 6 loc 21 color Unknown misc 1 hdac0: nid 24 0x55a601f0 as 15 seq 0 Mic None jack 6 loc 21 color Unknown misc 1 hdac0: Patching widget caps nid=26 0x00400000 -> 0x00700000 hdac0: nid 27 0x614411f0 as 15 seq 0 SPDIF-out None jack 4 loc 33 color Black misc 1 hdac0: nid 28 0x21a15020 as 2 seq 0 Mic Jack jack 1 loc 33 color Red misc 0 hdac0: Patched pins configuration: hdac0: nid 17 0x0421401f as 1 seq 15 Headphones Jack jack 1 loc 4 color Green misc 0 hdac0: nid 18 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 19 0x511301f0 as 15 seq 0 Speaker None jack 3 loc 17 color Unknown misc 1 [DISABLED] hdac0: nid 20 0x04a15021 as 2 seq 1 Mic Jack jack 1 loc 4 color Red misc 0 hdac0: nid 21 0x90a7012e as 2 seq 14 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac0: nid 22 0x593301f0 as 15 seq 0 CD None jack 3 loc 25 color Unknown misc 1 [DISABLED] hdac0: nid 23 0x55a601f0 as 15 seq 0 Mic None jack 6 loc 21 color Unknown misc 1 [DISABLED] hdac0: nid 24 0x55a601f0 as 15 seq 0 Mic None jack 6 loc 21 color Unknown misc 1 [DISABLED] hdac0: nid 27 0x614411f0 as 15 seq 0 SPDIF-out None jack 4 loc 33 color Black misc 1 [DISABLED] hdac0: nid 28 0x21a15020 as 2 seq 0 Mic Jack jack 1 loc 33 color Red misc 0 hdac0: 2 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=18 seq=0 hdac0: Pin nid=17 seq=15 hdac0: Association 1 (2) in: hdac0: Pin nid=28 seq=0 hdac0: Pin nid=20 seq=1 hdac0: Pin nid=21 seq=14 hdac0: Tracing association 0 (1) hdac0: Pin 18 traced to DAC 4 hdac0: Pin 17 traced to DAC 4 and hpredir 0 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Unable to trace pin 28 to ADC 5, undo traces hdac0: Unable to trace pin 28 to ADC 6, undo traces hdac0: Pin 28 traced to ADC 8 hdac0: Pin 20 traced to ADC 8 hdac0: Pin 21 traced to ADC 8 hdac0: Association 1 (2) trace succeeded hdac0: Tracing input monitor hdac0: Tracing nid 32 to out hdac0: nid 32 is input monitor hdac0: Tracing other input monitors hdac0: Tracing nid 20 to out hdac0: Tracing nid 21 to out hdac0: Tracing nid 28 to out hdac0: Tracing beeper hdac0: Enabling headphone/speaker audio routing switching: hdac0: as=0 sense nid=17 [UNSOL] hdac0: Pin sense: nid=17 res=0x7fffffff hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: IN amp: 0x80000000 hdac0: OUT amp: 0x00052727 hdac0: hdac0: nid: 2 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00030311 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: connections: 3 hdac0: | hdac0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected) hdac0: + <- nid=8 [audio input] hdac0: + <- nid=9 [audio input] [DISABLED] hdac0: hdac0: nid: 3 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00000405 hdac0: PWR STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: Output amp: 0x00052727 hdac0: mute=0 step=39 size=5 offset=39 hdac0: hdac0: nid: 4 hdac0: Name: audio output hdac0: Widget cap: 0x00000405 hdac0: PWR STEREO hdac0: Association: 0 (0x00008001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: Output amp: 0x00052727 hdac0: mute=0 step=39 size=5 offset=39 hdac0: hdac0: nid: 5 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x0010050b hdac0: PWR STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: Input amp: 0x80053627 hdac0: mute=1 step=54 size=5 offset=39 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=23 [pin: Mic (None)] [DISABLED] hdac0: hdac0: nid: 6 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x0010050b hdac0: PWR STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: Input amp: 0x80053627 hdac0: mute=1 step=54 size=5 offset=39 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED] hdac0: hdac0: nid: 7 hdac0: Name: audio mixer hdac0: Widget cap: 0x00200103 hdac0: STEREO hdac0: Association: 0 (0x00008000) hdac0: OSS: pcm, mix hdac0: Input amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 2 hdac0: | hdac0: + <- nid=34 [audio selector] hdac0: + <- nid=33 [audio selector] hdac0: hdac0: nid: 8 hdac0: Name: audio input hdac0: Widget cap: 0x00100501 hdac0: PWR STEREO hdac0: Association: 1 (0x00004003) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=12 [audio selector] hdac0: hdac0: nid: 9 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x00100501 hdac0: PWR STEREO hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07ff hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=13 [audio selector] [DISABLED] hdac0: hdac0: nid: 10 hdac0: Name: audio mixer hdac0: Widget cap: 0x00200103 hdac0: STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm, mix hdac0: Input amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 2 hdac0: | hdac0: + <- nid=4 [audio output] hdac0: + <- nid=33 [audio selector] hdac0: hdac0: nid: 11 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200103 hdac0: STEREO hdac0: Input amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=15 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=33 [audio selector] hdac0: hdac0: nid: 12 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00004003) hdac0: OSS: line, mic, mix, monitor hdac0: Output amp: 0x80053627 hdac0: mute=1 step=54 size=5 offset=39 hdac0: connections: 5 hdac0: | hdac0: + <- nid=20 [pin: Mic (Red Jack)] hdac0: + <- nid=21 [pin: Mic (Fixed)] hdac0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdac0: + <- nid=32 [audio mixer] hdac0: + <- nid=37 [audio selector] (selected) hdac0: hdac0: nid: 13 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Output amp: 0x80053627 hdac0: mute=1 step=54 size=5 offset=39 hdac0: connections: 5 hdac0: | hdac0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdac0: + <- nid=21 [pin: Mic (Fixed)] hdac0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdac0: + <- nid=32 [audio mixer] hdac0: + <- nid=37 [audio selector] hdac0: hdac0: nid: 14 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x00300101 hdac0: STEREO hdac0: connections: 2 hdac0: | hdac0: + <- nid=3 [audio output] [DISABLED] (selected) hdac0: + <- nid=4 [audio output] hdac0: hdac0: nid: 15 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x00300101 hdac0: STEREO hdac0: connections: 2 hdac0: | hdac0: + <- nid=3 [audio output] [DISABLED] (selected) hdac0: + <- nid=4 [audio output] hdac0: hdac0: nid: 16 hdac0: Name: beep widget hdac0: Widget cap: 0x0070000c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: Output amp: 0x800b0f0f hdac0: mute=1 step=15 size=11 offset=15 hdac0: hdac0: nid: 17 hdac0: Name: pin: Headphones (Green Jack) hdac0: Widget cap: 0x0040018d hdac0: UNSOL STEREO hdac0: Association: 0 (0x00008000) hdac0: Pin cap: 0x0000001f hdac0: ISC TRQD PDC HP OUT hdac0: Pin config: 0x0421401f hdac0: Pin control: 0x000000c0 HP OUT hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=7 [audio mixer] hdac0: hdac0: nid: 18 hdac0: Name: pin: Speaker (Fixed) hdac0: Widget cap: 0x0040058d hdac0: PWR UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x0001001f hdac0: ISC TRQD PDC HP OUT EAPD hdac0: Pin config: 0x90170110 hdac0: Pin control: 0x00000040 OUT hdac0: EAPD: 0x00000002 hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=10 [audio mixer] hdac0: hdac0: nid: 19 [DISABLED] hdac0: Name: pin: Speaker (None) hdac0: Widget cap: 0x0040050c hdac0: PWR hdac0: Pin cap: 0x00010010 hdac0: OUT EAPD hdac0: Pin config: 0x511301f0 hdac0: Pin control: 0x00000000 hdac0: EAPD: 0x00000002 hdac0: Output amp: 0x80051f1f hdac0: mute=1 step=31 size=5 offset=31 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=31 [audio mixer] [DISABLED] hdac0: hdac0: nid: 20 hdac0: Name: pin: Mic (Red Jack) hdac0: Widget cap: 0x0040008b hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000002) hdac0: OSS: mic (mic) hdac0: Pin cap: 0x00003727 hdac0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdac0: Pin config: 0x04a15021 hdac0: Pin control: 0x00000025 IN VREFs hdac0: Input amp: 0x00270300 hdac0: mute=0 step=3 size=39 offset=0 hdac0: hdac0: nid: 21 hdac0: Name: pin: Mic (Fixed) hdac0: Widget cap: 0x0040008b hdac0: UNSOL STEREO hdac0: Association: 1 (0x00004000) hdac0: OSS: monitor (monitor) hdac0: Pin cap: 0x00003727 hdac0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdac0: Pin config: 0x90a7012e hdac0: Pin control: 0x00000025 IN VREFs hdac0: Input amp: 0x00270300 hdac0: mute=0 step=3 size=39 offset=0 hdac0: hdac0: nid: 22 [DISABLED] hdac0: Name: pin: CD (None) hdac0: Widget cap: 0x0040018d hdac0: UNSOL STEREO hdac0: Pin cap: 0x00000037 hdac0: ISC TRQD PDC OUT IN hdac0: Pin config: 0x593301f0 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=11 [audio mixer] [DISABLED] hdac0: hdac0: nid: 23 [DISABLED] hdac0: Name: pin: Mic (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x55a601f0 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 24 [DISABLED] hdac0: Name: pin: Mic (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x55a601f0 hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 25 [DISABLED] hdac0: Name: power widget hdac0: Widget cap: 0x00500500 hdac0: PWR hdac0: connections: 2 hdac0: | hdac0: + <- nid=32 [audio mixer] (selected) hdac0: + <- nid=33 [audio selector] hdac0: hdac0: nid: 26 hdac0: Name: beep widget hdac0: Widget cap: 0x00700000 hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: hdac0: nid: 27 [DISABLED] hdac0: Name: pin: SPDIF-out (None) hdac0: Widget cap: 0x0040030d hdac0: DIGITAL STEREO hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x614411f0 hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80052727 hdac0: mute=1 step=39 size=5 offset=39 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=2 [audio output] [DISABLED] hdac0: hdac0: nid: 28 hdac0: Name: pin: Mic (Red Jack) hdac0: Widget cap: 0x0040018d hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: line (line) hdac0: Pin cap: 0x00003737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 100 GROUND HIZ ] hdac0: Pin config: 0x21a15020 hdac0: Pin control: 0x00000025 IN VREFs hdac0: Output amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=36 [audio mixer] [DISABLED] hdac0: hdac0: nid: 29 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f00100 hdac0: connections: 25 hdac0: | hdac0: + <- nid=7 [audio mixer] (selected) hdac0: + [DISABLED] <- nid=25 [power widget] [DISABLED] hdac0: + <- nid=10 [audio mixer] hdac0: + <- nid=11 [audio mixer] [DISABLED] hdac0: + <- nid=12 [audio selector] hdac0: + <- nid=13 [audio selector] [DISABLED] hdac0: + <- nid=14 [audio selector] [DISABLED] hdac0: + <- nid=15 [audio selector] [DISABLED] hdac0: + <- nid=26 [beep widget] hdac0: + <- nid=28 [pin: Mic (Red Jack)] hdac0: + <- nid=17 [pin: Headphones (Green Jack)] hdac0: + <- nid=18 [pin: Speaker (Fixed)] hdac0: + [DISABLED] <- nid=19 [pin: Speaker (None)] [DISABLED] hdac0: + <- nid=20 [pin: Mic (Red Jack)] hdac0: + <- nid=21 [pin: Mic (Fixed)] hdac0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdac0: + <- nid=30 [audio mixer] [DISABLED] hdac0: + <- nid=31 [audio mixer] [DISABLED] hdac0: + <- nid=32 [audio mixer] hdac0: + <- nid=33 [audio selector] hdac0: + <- nid=34 [audio selector] hdac0: + <- nid=35 [audio selector] [DISABLED] hdac0: + <- nid=36 [audio mixer] [DISABLED] hdac0: + <- nid=37 [audio selector] hdac0: + <- nid=38 [vendor widget] [DISABLED] hdac0: hdac0: nid: 30 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200103 hdac0: STEREO hdac0: Input amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=14 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=33 [audio selector] hdac0: hdac0: nid: 31 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200100 hdac0: connections: 1 hdac0: | hdac0: + <- nid=30 [audio mixer] [DISABLED] hdac0: hdac0: nid: 32 hdac0: Name: audio mixer hdac0: Widget cap: 0x0020010b hdac0: STEREO hdac0: Association: 1 (0x00004003) hdac0: OSS: mix (mix) hdac0: Input amp: 0x80051f17 hdac0: mute=1 step=31 size=5 offset=23 hdac0: connections: 5 hdac0: | hdac0: + <- nid=20 [pin: Mic (Red Jack)] hdac0: + <- nid=21 [pin: Mic (Fixed)] hdac0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdac0: + <- nid=26 [beep widget] hdac0: + <- nid=37 [audio selector] hdac0: hdac0: nid: 33 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: -2 (0x00000000) hdac0: OSS: mix hdac0: Output amp: 0x80051f1f hdac0: mute=1 step=31 size=5 offset=31 hdac0: connections: 1 hdac0: | hdac0: + <- nid=32 [audio mixer] hdac0: hdac0: nid: 34 hdac0: Name: audio selector hdac0: Widget cap: 0x00300101 hdac0: STEREO hdac0: Association: 0 (0x00008000) hdac0: OSS: pcm hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=3 [audio output] [DISABLED] hdac0: + <- nid=4 [audio output] (selected) hdac0: hdac0: nid: 35 [DISABLED] hdac0: Name: audio selector hdac0: Widget cap: 0x00300101 hdac0: STEREO hdac0: connections: 2 hdac0: | hdac0: + <- nid=3 [audio output] [DISABLED] (selected) hdac0: + <- nid=4 [audio output] hdac0: hdac0: nid: 36 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200103 hdac0: STEREO hdac0: Input amp: 0x80000000 hdac0: mute=1 step=0 size=0 offset=0 hdac0: connections: 2 hdac0: | hdac0: + [DISABLED] <- nid=35 [audio selector] [DISABLED] hdac0: + [DISABLED] <- nid=33 [audio selector] hdac0: hdac0: nid: 37 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: line hdac0: Output amp: 0x00270300 hdac0: mute=0 step=3 size=39 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=28 [pin: Mic (Red Jack)] hdac0: hdac0: nid: 38 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f00100 hdac0: connections: 3 hdac0: | hdac0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdac0: + <- nid=21 [pin: Mic (Fixed)] hdac0: + <- nid=28 [pin: Mic (Red Jack)] hdac0: hdac0: Processing modem FG cad=1 nid=2... hdac0: pcm0: at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: DAC: 4 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: ADC: 8 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=18 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=10 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: nid=17 [pin: Headphones (Green Jack)] pcm0: | pcm0: + <- nid=7 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=34 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: pcm0: nid=8 [audio input] pcm0: | pcm0: + <- nid=12 [audio selector] [src: line, mic, mix, monitor] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=32 [audio mixer] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=26 [beep widget] [src: speaker] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 14 (nid 17 in ): mute pcm0: +- ctl 15 (nid 18 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- ctl 17 (nid 20 out): 0/30dB (4 steps) pcm0: pcm0: Microphone2 Volume (OSS: monitor) pcm0: | pcm0: +- ctl 18 (nid 21 out): 0/30dB (4 steps) pcm0: pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- ctl 32 (nid 37 out): 0/30dB (4 steps) pcm0: pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 13 (nid 16 out): -45/0dB (16 steps) + mute pcm0: +- ctl 27 (nid 32 in 3): -34/12dB (32 steps) + mute pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: pcm0: Input Mix Level (OSS: mix) pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 24 (nid 32 in 0): -34/12dB (32 steps) + mute pcm0: +- ctl 25 (nid 32 in 1): -34/12dB (32 steps) + mute pcm0: +- ctl 27 (nid 32 in 3): -34/12dB (32 steps) + mute pcm0: +- ctl 28 (nid 32 in 4): -34/12dB (32 steps) + mute pcm0: +- ctl 29 (nid 33 out): -46/0dB (32 steps) + mute pcm0: pcm0: Input Monitoring Level (OSS: igain) pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1710000, 4000; 0xec8b0000 -> 1710000 pcm0: sndbuf_setmap 1720000, 4000; 0xec8c0000 -> 1720000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found battery0: battery initialization start acpi_acad0: acline initialization start battery0: battery initialization done, tried 1 times system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number OCZ- GEOM: new disk ada0 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 pass0 at ahcich0 bus 0 scbus1 target 0 lun 0 pass0: ATA-8 SATA 2.x device pass0: Serial Number OCZ- pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 TSC timecounter disabled: C3 enabled. Timecounter "TSC" frequency 1596038544 Hz quality -1000 GEOM: ada0s4: geometry does not match label (240h,63s != 16h,63s). GEOM: ada0s4: invalid disklabel. Root mount waiting for: usbus5 usbus2 uhub2: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 ugen0.2: at usbus0 Root mount waiting for: usbus2 ugen2.2: at usbus2 umass0: on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:2:0:-1: Attached to scbus2 Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]... mountroot: waiting for device /dev/iso9660/FREEBSD_INSTALL ... (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:0,0 (No additional sense information) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? GEOM: new disk cd0 pass1 at umass-sim0 bus 0 scbus2 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 40.000MB/s transfers cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [256941 x 2048 byte records] pass2 at umass-sim0 bus 0 scbus2 target 0 lun 1 pass2: Fixed Direct Access SCSI-4 device pass2: Serial Number PE04000000 pass2: 40.000MB/s transfers da0 at umass-sim0 bus 0 scbus2 target 0 lun 1 da0: Fixed Direct Access SCSI-4 device da0: Serial Number PE04000000 da0: 40.000MB/s transfers da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C) GEOM: new disk da0 start_init: trying /sbin/init pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: found-> vendor=0x168c, dev=0x0013, revid=0x01 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 ath0: irq 16 at device 0.0 on cardbus0 pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0 ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff ath0: unable to attach hardware; HAL status 14 cbb0: Opening memory: device_attach: ath0 attach returned 6 From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:49:17 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 425831065674 for ; Sat, 7 Apr 2012 20:49:17 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id 12B238FC15 for ; Sat, 7 Apr 2012 20:49:17 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3818565pbc.13 for ; Sat, 07 Apr 2012 13:49:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=JnE0UHbZXPrd8ew4syxnRi74jXmxDkAli2bU5WDiVuA=; b=UEKV4VmQ3O3tZrIFrfre+8sJSfX2wJ1wtYpCLXB8FxwK8CfWW+aOjguzQnvTgBfgRg DfOu3sYbwy1HrLGjQD1OCXC7XL/WGfa+qBjlPTtH7LfbCxjJBidHFtxyCPyuY97PNXf7 JyjMW8wz+wsW7MGZWxr6x6RT3qYphbIEICsBDVstHyWgLY0Q3IsXQso/PJ2Ga3713l3N 4FuIGFl2DE4NvZMO+UgHeN2C7GAyhuTZSQwmy1uJrWQtfEK5faJvqCCVROM0ggBe7IaM prjW5BZ3iwkHc4eYxVI+oNcjYC6rennNctA9RDjAGVWHC6Bir5AfKUg9z0+gHNig1/2M wmsg== MIME-Version: 1.0 Received: by 10.68.194.1 with SMTP id hs1mr6735837pbc.6.1333831756808; Sat, 07 Apr 2012 13:49:16 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 13:49:16 -0700 (PDT) In-Reply-To: <4F80A81C.2070602@gmail.com> References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> <4F80A81C.2070602@gmail.com> Date: Sat, 7 Apr 2012 13:49:16 -0700 X-Google-Sender-Auth: A3GNW7eXyuo8ahZYqvmyyz9EjR0 Message-ID: From: Adrian Chadd To: "Sevan / Venture37" Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-wireless@freebsd.org Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:49:17 -0000 .. right, but did ath0 work at that point? :) Adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 20:55:19 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DE94C1065670 for ; Sat, 7 Apr 2012 20:55:19 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-wg0-f50.google.com (mail-wg0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 63B818FC12 for ; Sat, 7 Apr 2012 20:55:19 +0000 (UTC) Received: by wgbds12 with SMTP id ds12so3090304wgb.31 for ; Sat, 07 Apr 2012 13:55:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=6x4Qf4vIQGlDLLvhBNV3+tLyPFjYEegeily2x7dWXH0=; b=P00UWmH8zRRHhB4tY7RInAVB3Xp6W27ARnW/9bQjWF1p7MMYuDaO7fZEdzAseutKRh /Vd9GIg6DsZ8VIx+jwT1wE+G4xJ+W5c4fIp722r9UzoEaibKw26PRWGHItG4LOIrgBMD C8frVOrP6a+5B4BXIeMfOid8VsRVclq0pm6sDjbJs0Pxb2pxgNWXYqr1NnS5SVRybjGG Uf0J9BzhElwpvLscG1wUSNHZrL7SbP31ras9FXBf/tRA5ONjeQA85Kj2I74IqDkxfk3a k13k/5uNoc+22DXqgXXfsleWTj0MXMuCXj2sbnaD4zJCYq9mS9VPKQvpCIqbKo6E28j7 xDHA== Received: by 10.180.92.71 with SMTP id ck7mr5053383wib.21.1333832118284; Sat, 07 Apr 2012 13:55:18 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id gg2sm27943390wib.7.2012.04.07.13.55.17 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 13:55:17 -0700 (PDT) Message-ID: <4F80A9B4.2000500@gmail.com> Date: Sat, 07 Apr 2012 21:55:16 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> <4F80A81C.2070602@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 20:55:19 -0000 On 07/04/2012 21:49, Adrian Chadd wrote: > .. right, but did ath0 work at that point?:) > > > Adrian no, the driver fails to attach downloading a -HEAD i386 snapshot built yesterday. Sevan From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 21:16:54 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B55DA1065674 for ; Sat, 7 Apr 2012 21:16:54 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-wg0-f50.google.com (mail-wg0-f50.google.com [74.125.82.50]) by mx1.freebsd.org (Postfix) with ESMTP id 3E4938FC0A for ; Sat, 7 Apr 2012 21:16:54 +0000 (UTC) Received: by wgbds12 with SMTP id ds12so3098367wgb.31 for ; Sat, 07 Apr 2012 14:16:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=3EnAfBGDn2uygqr0E0ZzfP2z1rabsPYYoUH5TJINqY8=; b=st8jw2DJC8mY3wYhIk8tEV517SXIly3pe99uv/PfnrF3CTMcxWRw3htxml9l/CrO/o flFvWua+B8GrlRnowbVauRZuq+SG4tmwikYwHoVg45JLhdpl4zaGaCIMITCXHY0DB3aF nMlvk64lgflj7LwcqmmgsJy7ilkXjj+aahbT8eCEzWHVDudNLK5NFcy9TIWo/iWi8WeJ ATytBCD06RDtFzun/G9+nrSLk/qJsXb2uDer0Ia59P4DoJQM+7pxoPKhcdMis0BwZwbK ZDK1syWIBhnUO3/Xd1uKXD/bSDfXApDQ01gq1diiE9K5CBJqhq3FeitIen6YCOgpaQqd Uh+w== Received: by 10.180.96.228 with SMTP id dv4mr5347601wib.14.1333833413276; Sat, 07 Apr 2012 14:16:53 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id ff9sm17508520wib.2.2012.04.07.14.16.51 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 14:16:52 -0700 (PDT) Message-ID: <4F80AEC3.2050602@gmail.com> Date: Sat, 07 Apr 2012 22:16:51 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> <4F80A81C.2070602@gmail.com> <4F80A9B4.2000500@gmail.com> In-Reply-To: <4F80A9B4.2000500@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 21:16:54 -0000 On 07/04/2012 21:55, Sevan / Venture37 wrote: > downloading a -HEAD i386 snapshot built yesterday. hmm, i386 snapshot built yesterday panics on boot with error: bad stray interrupt (without atheros card even inserted) Sevan From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 22:22:18 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id ED3E7106564A for ; Sat, 7 Apr 2012 22:22:18 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-pb0-f54.google.com (mail-pb0-f54.google.com [209.85.160.54]) by mx1.freebsd.org (Postfix) with ESMTP id BB9558FC0A for ; Sat, 7 Apr 2012 22:22:18 +0000 (UTC) Received: by pbcwz17 with SMTP id wz17so3854347pbc.13 for ; Sat, 07 Apr 2012 15:22:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:cc:content-type; bh=mhf3WcJh9EPnPmpA7D33oAJ1sglQ8JRbbHd6rVDDrag=; b=gs3IJL1YCtFmRd1E/mx8xIW/m/RiSmUKDCZf9v+tCMVgxl6qQro2Y+9+Iyf35rcxJ0 b5rmbiSniZ9lLNA35owHELUpB17kUJdtt0xB0uvBwqoiSOMGli5cTmEHwdGxuQtVTHqj 0HbcKkB5Lq54GTBqlLFbuERQm0E1wgc6KxvFgv9GYv7muMLzsj+ZtV7Sn2iDKNg1Blhz wkhrBQt2eNJm4s3idT+mjbSMWNjmUhCwUnwGpBo5Z38expzNwFccORbjQA8t6ThFsJ2h WgxSflXWLfg9306DLU2rKUacRXYN9pvlTSxnmxqlBJsDYL8UJdeDvbU6V8cgsOCxh3ea drRg== MIME-Version: 1.0 Received: by 10.68.202.167 with SMTP id kj7mr7248245pbc.9.1333837338321; Sat, 07 Apr 2012 15:22:18 -0700 (PDT) Sender: adrian.chadd@gmail.com Received: by 10.142.134.6 with HTTP; Sat, 7 Apr 2012 15:22:18 -0700 (PDT) In-Reply-To: <4F80AEC3.2050602@gmail.com> References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> <4F80A81C.2070602@gmail.com> <4F80A9B4.2000500@gmail.com> <4F80AEC3.2050602@gmail.com> Date: Sat, 7 Apr 2012 15:22:18 -0700 X-Google-Sender-Auth: 2sW4fXnZnVNfwVpQTs6Q6BfWtvo Message-ID: From: Adrian Chadd To: "Sevan / Venture37" Content-Type: text/plain; charset=ISO-8859-1 Cc: freebsd-wireless@freebsd.org Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 22:22:19 -0000 On 7 April 2012 14:16, Sevan / Venture37 wrote: > On 07/04/2012 21:55, Sevan / Venture37 wrote: >> >> downloading a -HEAD i386 snapshot built yesterday. > > > hmm, i386 snapshot built yesterday panics on boot with error: bad stray > interrupt (without atheros card even inserted) Damn. What the heck? What's the panic message, and which interrupt? adrian From owner-freebsd-wireless@FreeBSD.ORG Sat Apr 7 22:56:02 2012 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1C6D31065676 for ; Sat, 7 Apr 2012 22:56:02 +0000 (UTC) (envelope-from venture37@gmail.com) Received: from mail-wi0-f172.google.com (mail-wi0-f172.google.com [209.85.212.172]) by mx1.freebsd.org (Postfix) with ESMTP id 424138FC08 for ; Sat, 7 Apr 2012 22:56:01 +0000 (UTC) Received: by wibhj6 with SMTP id hj6so1203984wib.13 for ; Sat, 07 Apr 2012 15:56:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=9h26wCGLJsGb5lwP13dpR7oBYSU1UZVklMCd2TSFOCE=; b=eBpuU+KfIKu7OPIf1Xz4l9hHVF2Bq9EBfbdNGa8l7Ld3/cEaet+DC6oTB/TE6gIqfN H9TWNq3RRouRpf58hcDTP+A3vs8khk8z72PnRs8KyDIvsAIiorb2Eydk52Bk9E/ZwTqN dP1Rzlk+mDvI6OjSRn2G05j82c2kNK3r92OFiB6bexHHTQDyHpAWsnCcfN9qiq0hmQiF +bLIeIZqdIAOEfvExHwj2tV/CDInBRg1CxV67xLRb8Pdqeje2WlOTF5ZWosXuAjouvEZ mKz2KnF8LvRn/teCib4t5ScbCuVZ71aKfaXLGiRQgTcSxD11bwDn18o2rgCD6iqPQbl7 PMTA== Received: by 10.216.136.149 with SMTP id w21mr1327937wei.90.1333839359030; Sat, 07 Apr 2012 15:55:59 -0700 (PDT) Received: from Sevans-MacBook-Pro.local (cpc2-brig17-2-0-cust527.3-3.cable.virginmedia.com. [81.101.198.16]) by mx.google.com with ESMTPS id fl2sm24277749wib.2.2012.04.07.15.55.57 (version=SSLv3 cipher=OTHER); Sat, 07 Apr 2012 15:55:58 -0700 (PDT) Message-ID: <4F80C5FC.70607@gmail.com> Date: Sat, 07 Apr 2012 23:55:56 +0100 From: Sevan / Venture37 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:11.0) Gecko/20120327 Thunderbird/11.0.1 MIME-Version: 1.0 To: freebsd-wireless@freebsd.org References: <4F8052EB.5090007@gmail.com> <4F806763.7040404@gmail.com> <4F8095D8.5020701@gmail.com> <4F80A38C.3080602@gmail.com> <4F80A81C.2070602@gmail.com> <4F80A9B4.2000500@gmail.com> <4F80AEC3.2050602@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ath(4) fails to attach X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 07 Apr 2012 22:56:02 -0000 On 07/04/2012 23:22, Adrian Chadd wrote: > Damn. What the heck? What's the panic message, and which interrupt? *sigh* it seems to be booting now :/ MP Configuration Table version 1.4 found at 0xc009dda1 Table 'FACP' at 0xbf6bd300 Table 'SSDT' at 0xbf6bd4b4 Table 'ECDT' at 0xbf6cba38 Table 'TCPA' at 0xbf6cba8a Table 'APIC' at 0xbf6cbabc APIC: Found table at 0xbf6cbabc APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0: Fri Apr 6 04:10:19 UTC 2012 root@build-i386-fbsd-2.allbsd.org:/usr/obj/i386.i386/usr/src/sys/GENERIC i386 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc14a4000. Calibrating TSC clock ... TSC clock: 1596035728 Hz CPU: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz (1596.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100000 AMD Features2=0x1 TSC: P-state invariant, performance statistics Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001826000 - 0x00000000bc061fff, 3129196544 bytes (763964 pages) avail memory = 3127271424 (2982 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f6900 bios32: Entry = 0xfdc80 (c00fdc80) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfdc10+0x1b7 pnpbios: Found PnP BIOS data at 0xc00f69a0 pnpbios: Entry = f0000:b83d Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf6950 00024 (v02 LENOVO) ACPI: XSDT 0xbf6bd1b7 0009C (v01 LENOVO TP-7V 00002220 LTP 00000000) ACPI: FACP 0xbf6bd300 000F4 (v03 LENOVO TP-7V 00002220 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120320/tbfadt-580) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120320/tbfadt-610) ACPI: DSDT 0xbf6bd6db 0E35D (v01 LENOVO TP-7V 00002220 MSFT 03000000) ACPI: FACS 0xbf6e4000 00040 ACPI: SSDT 0xbf6bd4b4 00227 (v01 LENOVO TP-7V 00002220 MSFT 03000000) ACPI: ECDT 0xbf6cba38 00052 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: TCPA 0xbf6cba8a 00032 (v02 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: APIC 0xbf6cbabc 00068 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: MCFG 0xbf6cbb24 0003C (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: HPET 0xbf6cbb60 00038 (v01 LENOVO TP-7V 00002220 LNVO 00000001) ACPI: SLIC 0xbf6cbb98 00176 (v01 LENOVO TP-7V 00002220 SLIC 00000000) ACPI: SLAC 0xbf6cbdf0 00176 (v01 LENOVO TP-7V 00002220 LTP 00000000) ACPI: BOOT 0xbf6cbf66 00028 (v01 LENOVO TP-7V 00002220 LTP 00000001) ACPI: ASF! 0xbf6cbf8e 00072 (v16 LENOVO TP-7V 00002220 PTL 00000001) ACPI: SSDT 0xbf6e2697 0025F (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e28f6 000A6 (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e299c 004F7 (v01 LENOVO TP-7V 00002220 INTL 20050513) ACPI: SSDT 0xbf6e2e93 001D8 (v01 LENOVO TP-7V 00002220 INTL 20050513) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled nfslock: pseudo-device null: VESA: INT 0x10 vector 0xc000:0x0014 VESA: information block 0000 56 45 53 41 00 03 00 01 00 9c 01 00 00 00 40 00 0010 00 9c 77 00 00 01 3d 01 00 9c 4f 01 00 9c 7d 01 0020 00 9c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040 60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01 0050 68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01 0060 70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 0070 07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 0080 15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 49 6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d 0110 39 36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69 0120 63 73 20 43 68 69 70 20 41 63 63 65 6c 65 72 61 0130 74 65 64 20 56 47 41 20 42 49 4f 53 00 49 6e 74 0140 65 6c 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 49 0150 6e 74 65 6c 28 72 29 47 4d 39 36 35 2f 50 4d 39 0160 36 35 2f 47 4c 39 36 30 20 47 72 61 70 68 69 63 0170 73 20 43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72 0180 64 77 61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e 0190 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 12 mode(s) found VESA: v3.0, 7616k memory, flags:0x1, mode table:0xc73fb040 (9c000040) VESA: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS VESA: Intel Corporation Intel(r)GM965/PM965/GL960 Graphics Controller Hardware Version 0.0 io: random: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 pcibios: BIOS version 3.00 CPU0: local APIC error 0x40 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc7091000 pa 0x1000 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: on acpi0 ACPI: SSDT 0xbf6e1b32 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 0xbf6e1e39 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) cpu1: on acpi0 ACPI: SSDT 0xbf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 0xbf6e1db4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 51 Event timer "RTC" frequency 32768 Hz quality 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 Validation 0 10 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 Validation 0 11 N 0 3 4 5 6 7 9 10 11 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xd4000-0xd7fff pcib0: decoding 3 range 0xd8000-0xdbfff pcib0: decoding 3 range 0xdc000-0xdffff pcib0: decoding 3 range 0xc0000000-0xfebfffff pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a02, revid=0x0c domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf8000000, size 20, enabled pcib0: allocated type 3 (0xf8000000-0xf80fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled pcib0: allocated type 4 (0x1800-0x1807) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a03, revid=0x0c domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xf8100000, size 20, enabled pcib0: allocated type 3 (0xf8100000-0xf81fffff) for rid 10 of pci0:0:2:1 found-> vendor=0x8086, dev=0x1049, revid=0x03 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf8200000, size 17, enabled pcib0: allocated type 3 (0xf8200000-0xf821ffff) for rid 10 of pci0:0:25:0 map[14]: type Memory, range 32, base 0xf8225000, size 12, enabled pcib0: allocated type 3 (0xf8225000-0xf8225fff) for rid 14 of pci0:0:25:0 map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: allocated type 4 (0x1840-0x185f) for rid 18 of pci0:0:25:0 pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2834, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: allocated type 4 (0x1860-0x187f) for rid 20 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: allocated type 4 (0x1880-0x189f) for rid 20 of pci0:0:26:1 pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8426c00, size 10, enabled pcib0: allocated type 3 (0xf8426c00-0xf8426fff) for rid 10 of pci0:0:26:7 pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf8220000, size 14, enabled pcib0: allocated type 3 (0xf8220000-0xf8223fff) for rid 10 of pci0:0:27:0 pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283f, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2841, revid=0x03 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2830, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: allocated type 4 (0x18a0-0x18bf) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2831, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled pcib0: allocated type 4 (0x18c0-0x18df) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2836, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8427000, size 10, enabled pcib0: allocated type 3 (0xf8427000-0xf84273ff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2448, revid=0xf3 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2811, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1 map[20]: type I/O Port, range 32, base 0x18e0, size 4, enabled pcib0: allocated type 4 (0x18e0-0x18ef) for rid 20 of pci0:0:31:1 found-> vendor=0x8086, dev=0x2829, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type I/O Port, range 32, base 0x1c30, size 3, enabled pcib0: allocated type 4 (0x1c30-0x1c37) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0x1c24, size 2, enabled pcib0: allocated type 4 (0x1c24-0x1c27) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0x1c28, size 3, enabled pcib0: allocated type 4 (0x1c28-0x1c2f) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0x1c20, size 2, enabled pcib0: allocated type 4 (0x1c20-0x1c23) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled pcib0: allocated type 4 (0x1c00-0x1c1f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xf8426000, size 11, enabled pcib0: allocated type 3 (0xf8426000-0xf84267ff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283e, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf8427400, size 8, enabled pcib0: allocated type 3 (0xf8427400-0xf84274ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0x1c40, size 5, enabled pcib0: allocated type 4 (0x1c40-0x1c5f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 23 vgapci0: port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: mem 0xf8100000-0xf81fffff at device 2.1 on pci0 em0: port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: bpf attached em0: Ethernet address: 00:1d:72: uhci0: port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: port 0x1880-0x189f irq 21 at device 26.1 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53 usbus1 on uhci1 usbus1: bpf attached uhci1: usbpf: Attached ehci0: mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: bpf attached ehci0: usbpf: Attached hdac0: mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 55 hdac0: using IRQ 257 for MSI hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib1: irq 20 at device 28.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xf4000000-0xf5ffffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xf8500000-0xf85fffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf4000000-0xf5ffffff pcib1: prefetched decode 0xf8500000-0xf85fffff pci2: on pcib1 pci2: domain=0, physical bus=2 pcib2: irq 21 at device 28.1 on pci0 pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib2 pcib0: allocated type 3 (0xf6000000-0xf7ffffff) for rid 20 of pcib2 pcib0: allocated type 3 (0xf8600000-0xf86fffff) for rid 24 of pcib2 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf8600000-0xf86fffff pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit map[10]: type Memory, range 32, base 0xf7f00000, size 16, enabled pcib2: allocated memory range (0xf7f00000-0xf7f0ffff) for rid 10 of pci0:3:0:0 pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci3: at device 0.0 (no driver attached) uhci2: port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 56 usbus3 on uhci2 usbus3: bpf attached uhci2: usbpf: Attached uhci3: port 0x18c0-0x18df irq 17 at device 29.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57 usbus4 on uhci3 usbus4: bpf attached uhci3: usbpf: Attached ehci1: mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: bpf attached ehci1: usbpf: Attached pcib3: at device 30.0 on pci0 pcib0: allocated type 4 (0x4000-0x7fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xd4000000-0xd7efffff) for rid 20 of pcib3 pcib0: allocated type 3 (0xd8000000-0xdbffffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 5 pcib3: subordinate bus 8 pcib3: I/O decode 0x4000-0x7fff pcib3: memory decode 0xd4000000-0xd7efffff pcib3: prefetched decode 0xd8000000-0xdbffffff pcib3: Subtractively decoded bridge. pci5: on pcib3 pci5: domain=0, physical bus=5 found-> vendor=0x1180, dev=0x0476, revid=0xba domain=0, bus=5, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7eff000, size 12, enabled pcib3: allocated memory range (0xd7eff000-0xd7efffff) for rid 10 of pci0:5:0:0 pcib3: matched entry for 5.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x1180, dev=0x0832, revid=0x04 domain=0, bus=5, slot=0, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe800, size 11, enabled pcib3: allocated memory range (0xd7efe800-0xd7efefff) for rid 10 of pci0:5:0:1 pcib3: matched entry for 5.0.INTB pcib3: slot 0 INTB hardwired to IRQ 17 found-> vendor=0x1180, dev=0x0822, revid=0x21 domain=0, bus=5, slot=0, func=2 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7efe400, size 8, enabled pcib3: allocated memory range (0xd7efe400-0xd7efe4ff) for rid 10 of pci0:5:0:2 pcib3: matched entry for 5.0.INTC pcib3: slot 0 INTC hardwired to IRQ 18 cbb0: mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci5 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700ba 0x00822008 0x10: 0xd7eff000 0x020000dc 0xb0080605 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x09000000 0x00f00000 0x00000005 0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000 0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xd7efe800-0xd7efefff irq 17 at device 0.1 on pci5 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:1d:72:ff: fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:1d:72: fwe0: bpf attached fwe0: Ethernet address: 02:1d:72: fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:1d:72:ff: @ 0xfffe00000000, S400, maxrec 2048 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x2731000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: mem 0xd7efe400-0xd7efe4ff irq 18 at device 0.2 on pci5 sdhci0-slot0: 33MHz HS 4bits 3.3V DMA sdhci0-slot0: ============== REGISTER DUMP ============== sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x00000400 sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000000 sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci0-slot0: Caps: 0x01e021a1 | Max curr: 0x00000040 sdhci0-slot0: =========================================== sdhci0: 1 slot(s) allocated ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 59 mmc0: on sdhci0 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 ata0: at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 60 ahci0: port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0 ahci0: attempting to allocate 1 MSI vectors (4 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 61 ahci0: using IRQ 258 for MSI ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 3ports ahci0: Caps2: ahcich0: at channel 0 on ahci0 ahcich0: Caps: ahcich1: not probed (disabled) ahcich2: not probed (disabled) pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 63 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: on acpi0 acpi_acad0: on acpi0 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 3 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 3 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 3 of orm0 isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 ata1 failed to probe at port 0x170 irq 15 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port found at 0x3bc ppc0: cannot reserve I/O port range ppc0 failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices ctl: CAM Target Layer loaded est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 procfs registered Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. hdacc0: at cad 0 on hdac0 hdacc0: Root Node at nid=0: 1 subnodes 1-1 hdaa0: at nid 1 on hdacc0 hdaa0: Audio Function Group at nid=1: 37 subnodes 2-38 hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: input state=0 hdaa0: GPIO2: disabled hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00090801 hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 0421401f 1 15 Headphones Jack 1/8 Right Green 0 hdaa0: 18 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 19 511301f0 15 0 Speaker None ATAPI 0x11 Unknown 1 hdaa0: 20 04a15021 2 1 Mic Jack 1/8 Right Red 0 hdaa0: 21 90a7012e 2 14 Mic Fixed Analog Internal Unknown 1 hdaa0: 22 593301f0 15 0 CD None ATAPI Onboard Unknown 1 hdaa0: 23 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 hdaa0: 24 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 hdaa0: 26 91f311f0 15 0 Other Fixed ATAPI 0x11 Black 1 hdaa0: 27 614411f0 15 0 SPDIF-out None RCA Ext-Rear Black 1 hdaa0: 28 21a15020 2 0 Mic Jack 1/8 Ext-Rear Red 0 hdaa0: Patching widget caps nid=26 0x00400000 -> 0x00700000 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 0421401f 1 15 Headphones Jack 1/8 Right Green 0 hdaa0: 18 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 hdaa0: 19 511301f0 15 0 Speaker None ATAPI 0x11 Unknown 1 DISA hdaa0: 20 04a15021 2 1 Mic Jack 1/8 Right Red 0 hdaa0: 21 90a7012e 2 14 Mic Fixed Analog Internal Unknown 1 hdaa0: 22 593301f0 15 0 CD None ATAPI Onboard Unknown 1 DISA hdaa0: 23 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 DISA hdaa0: 24 55a601f0 15 0 Mic None Digital 0x15 Unknown 1 DISA hdaa0: 27 614411f0 15 0 SPDIF-out None RCA Ext-Rear Black 1 DISA hdaa0: 28 21a15020 2 0 Mic Jack 1/8 Ext-Rear Red 0 hdaa0: 2 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=18 seq=0 hdaa0: Pin nid=17 seq=15 hdaa0: Association 1 (2) in: hdaa0: Pin nid=28 seq=0 hdaa0: Pin nid=20 seq=1 hdaa0: Pin nid=21 seq=14 hdaa0: Tracing association 0 (1) hdaa0: Pin 18 traced to DAC 4 hdaa0: Pin 17 traced to DAC 4 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (2) hdaa0: Unable to trace pin 28 to ADC 5, undo traces hdaa0: Unable to trace pin 28 to ADC 6, undo traces hdaa0: Pin 28 traced to ADC 8 hdaa0: Pin 20 traced to ADC 8 hdaa0: Pin 21 traced to ADC 8 hdaa0: Association 1 (2) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional ADC for association 1 (2) hdaa0: ADC 9 considered equal to ADC 8 hdaa0: Tracing input monitor hdaa0: Tracing nid 32 to out hdaa0: nid 32 is input monitor hdaa0: Tracing other input monitors hdaa0: Tracing nid 20 to out hdaa0: Tracing nid 21 to out hdaa0: Tracing nid 28 to out hdaa0: Tracing beeper hdaa0: Headphones redirection for association 0 nid=17 using unsolicited responses. hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdaa0: hdaa0: +-------------------+ hdaa0: | DUMPING HDA NODES | hdaa0: +-------------------+ hdaa0: hdaa0: Default Parameter hdaa0: ----------------- hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: IN amp: 0x80000000 hdaa0: OUT amp: 0x00052727 hdaa0: hdaa0: nid: 2 [DISABLED] hdaa0: Name: audio output hdaa0: Widget cap: 0x00030311 hdaa0: DIGITAL STEREO hdaa0: Stream cap: 0x00000005 hdaa0: AC3 PCM hdaa0: PCM cap: 0x000e07e0 hdaa0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdaa0: connections: 3 hdaa0: | hdaa0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected) hdaa0: + <- nid=8 [audio input] hdaa0: + <- nid=9 [audio input] hdaa0: hdaa0: nid: 3 [DISABLED] hdaa0: Name: audio output hdaa0: Widget cap: 0x00000405 hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Output amp: 0x00052727 hdaa0: mute=0 step=39 size=5 offset=39 hdaa0: hdaa0: nid: 4 hdaa0: Name: audio output hdaa0: Widget cap: 0x00000405 hdaa0: PWR STEREO hdaa0: Association: 0 (0x00008001) hdaa0: OSS: pcm (pcm) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Output amp: 0x00052727 hdaa0: mute=0 step=39 size=5 offset=39 hdaa0: hdaa0: nid: 5 [DISABLED] hdaa0: Name: audio input hdaa0: Widget cap: 0x0010050b hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Input amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=23 [pin: Mic (None)] [DISABLED] hdaa0: hdaa0: nid: 6 [DISABLED] hdaa0: Name: audio input hdaa0: Widget cap: 0x0010050b hdaa0: PWR STEREO hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: Input amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=24 [pin: Mic (None)] [DISABLED] hdaa0: hdaa0: nid: 7 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Association: 0 (0x00008000) hdaa0: OSS: pcm, mix hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=34 [audio selector] hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 8 hdaa0: Name: audio input hdaa0: Widget cap: 0x00100501 hdaa0: PWR STEREO hdaa0: Association: 1 (0x00004003) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=12 [audio selector] hdaa0: hdaa0: nid: 9 hdaa0: Name: audio input hdaa0: Widget cap: 0x00100501 hdaa0: PWR STEREO hdaa0: Association: 1 (0x00004003) hdaa0: Stream cap: 0x00000001 hdaa0: PCM hdaa0: PCM cap: 0x000e07ff hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=13 [audio selector] hdaa0: hdaa0: nid: 10 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Association: 0 (0x00000001) hdaa0: OSS: pcm, mix hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=4 [audio output] hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 11 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=15 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 12 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: line, mic, mix, monitor hdaa0: Output amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=32 [audio mixer] (selected) hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 13 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: line, mic, mix, monitor hdaa0: Output amp: 0x80053627 hdaa0: mute=1 step=54 size=5 offset=39 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=32 [audio mixer] hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 14 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 15 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 16 hdaa0: Name: beep widget hdaa0: Widget cap: 0x0070000c hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker (speaker) hdaa0: Output amp: 0x800b0f0f hdaa0: mute=1 step=15 size=11 offset=15 hdaa0: hdaa0: nid: 17 hdaa0: Name: pin: Headphones (Green Jack) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Association: 0 (0x00008000) hdaa0: Pin cap: 0x0000001f hdaa0: ISC TRQD PDC HP OUT hdaa0: Pin config: 0x0421401f hdaa0: Pin control: 0x000000c0 HP OUT hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=7 [audio mixer] hdaa0: hdaa0: nid: 18 hdaa0: Name: pin: Speaker (Fixed) hdaa0: Widget cap: 0x0040058d hdaa0: PWR UNSOL STEREO hdaa0: Association: 0 (0x00000001) hdaa0: Pin cap: 0x0001001f hdaa0: ISC TRQD PDC HP OUT EAPD hdaa0: Pin config: 0x90170110 hdaa0: Pin control: 0x00000040 OUT hdaa0: EAPD: 0x00000002 hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=10 [audio mixer] hdaa0: hdaa0: nid: 19 [DISABLED] hdaa0: Name: pin: Speaker (None) hdaa0: Widget cap: 0x0040050c hdaa0: PWR hdaa0: Pin cap: 0x00010010 hdaa0: OUT EAPD hdaa0: Pin config: 0x511301f0 hdaa0: Pin control: 0x00000000 hdaa0: EAPD: 0x00000002 hdaa0: Output amp: 0x80051f1f hdaa0: mute=1 step=31 size=5 offset=31 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=31 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 20 hdaa0: Name: pin: Mic (Red Jack) hdaa0: Widget cap: 0x0040008b hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00000002) hdaa0: OSS: mic (mic) hdaa0: Pin cap: 0x00003727 hdaa0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x04a15021 hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: hdaa0: nid: 21 hdaa0: Name: pin: Mic (Fixed) hdaa0: Widget cap: 0x0040008b hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00004000) hdaa0: OSS: monitor (monitor) hdaa0: Pin cap: 0x00003727 hdaa0: ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x90a7012e hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Input amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: hdaa0: nid: 22 [DISABLED] hdaa0: Name: pin: CD (None) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Pin cap: 0x00000037 hdaa0: ISC TRQD PDC OUT IN hdaa0: Pin config: 0x593301f0 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=11 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 23 [DISABLED] hdaa0: Name: pin: Mic (None) hdaa0: Widget cap: 0x00400001 hdaa0: STEREO hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x55a601f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 24 [DISABLED] hdaa0: Name: pin: Mic (None) hdaa0: Widget cap: 0x00400001 hdaa0: STEREO hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x55a601f0 hdaa0: Pin control: 0x00000000 hdaa0: hdaa0: nid: 25 [DISABLED] hdaa0: Name: power widget hdaa0: Widget cap: 0x00500500 hdaa0: PWR hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=32 [audio mixer] (selected) hdaa0: + <- nid=33 [audio selector] hdaa0: hdaa0: nid: 26 hdaa0: Name: beep widget hdaa0: Widget cap: 0x00700000 hdaa0: Association: -2 (0x00000000) hdaa0: OSS: speaker (speaker) hdaa0: Pin cap: 0x00000020 hdaa0: IN hdaa0: Pin config: 0x91f311f0 hdaa0: Pin control: 0x00000020 IN hdaa0: hdaa0: nid: 27 [DISABLED] hdaa0: Name: pin: SPDIF-out (None) hdaa0: Widget cap: 0x0040030d hdaa0: DIGITAL STEREO hdaa0: Pin cap: 0x00000010 hdaa0: OUT hdaa0: Pin config: 0x614411f0 hdaa0: Pin control: 0x00000000 hdaa0: Output amp: 0x80052727 hdaa0: mute=1 step=39 size=5 offset=39 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=2 [audio output] [DISABLED] hdaa0: hdaa0: nid: 28 hdaa0: Name: pin: Mic (Red Jack) hdaa0: Widget cap: 0x0040018d hdaa0: UNSOL STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: line (line) hdaa0: Pin cap: 0x00003737 hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 100 GROUND HIZ ] hdaa0: Pin config: 0x21a15020 hdaa0: Pin control: 0x00000025 IN VREFs hdaa0: Output amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + [DISABLED] <- nid=36 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 29 [DISABLED] hdaa0: Name: vendor widget hdaa0: Widget cap: 0x00f00100 hdaa0: connections: 25 hdaa0: | hdaa0: + <- nid=7 [audio mixer] (selected) hdaa0: + [DISABLED] <- nid=25 [power widget] [DISABLED] hdaa0: + <- nid=10 [audio mixer] hdaa0: + <- nid=11 [audio mixer] [DISABLED] hdaa0: + <- nid=12 [audio selector] hdaa0: + <- nid=13 [audio selector] hdaa0: + <- nid=14 [audio selector] [DISABLED] hdaa0: + <- nid=15 [audio selector] [DISABLED] hdaa0: + <- nid=26 [beep widget] hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: + <- nid=17 [pin: Headphones (Green Jack)] hdaa0: + <- nid=18 [pin: Speaker (Fixed)] hdaa0: + [DISABLED] <- nid=19 [pin: Speaker (None)] [DISABLED] hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=30 [audio mixer] [DISABLED] hdaa0: + <- nid=31 [audio mixer] [DISABLED] hdaa0: + <- nid=32 [audio mixer] hdaa0: + <- nid=33 [audio selector] hdaa0: + <- nid=34 [audio selector] hdaa0: + <- nid=35 [audio selector] [DISABLED] hdaa0: + <- nid=36 [audio mixer] [DISABLED] hdaa0: + <- nid=37 [audio selector] hdaa0: + <- nid=38 [vendor widget] [DISABLED] hdaa0: hdaa0: nid: 30 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=14 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 31 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200100 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=30 [audio mixer] [DISABLED] hdaa0: hdaa0: nid: 32 hdaa0: Name: audio mixer hdaa0: Widget cap: 0x0020010b hdaa0: STEREO hdaa0: Association: 1 (0x00004003) hdaa0: OSS: mix (mix) hdaa0: Input amp: 0x80051f17 hdaa0: mute=1 step=31 size=5 offset=23 hdaa0: connections: 5 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + [DISABLED] <- nid=22 [pin: CD (None)] [DISABLED] hdaa0: + <- nid=26 [beep widget] hdaa0: + <- nid=37 [audio selector] hdaa0: hdaa0: nid: 33 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: -2 (0x00000000) hdaa0: OSS: mix hdaa0: Output amp: 0x80051f1f hdaa0: mute=1 step=31 size=5 offset=31 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=32 [audio mixer] hdaa0: hdaa0: nid: 34 hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: Association: 0 (0x00008000) hdaa0: OSS: pcm hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=3 [audio output] [DISABLED] hdaa0: + <- nid=4 [audio output] (selected) hdaa0: hdaa0: nid: 35 [DISABLED] hdaa0: Name: audio selector hdaa0: Widget cap: 0x00300101 hdaa0: STEREO hdaa0: connections: 2 hdaa0: | hdaa0: + <- nid=3 [audio output] [DISABLED] (selected) hdaa0: + <- nid=4 [audio output] hdaa0: hdaa0: nid: 36 [DISABLED] hdaa0: Name: audio mixer hdaa0: Widget cap: 0x00200103 hdaa0: STEREO hdaa0: Input amp: 0x80000000 hdaa0: mute=1 step=0 size=0 offset=0 hdaa0: connections: 2 hdaa0: | hdaa0: + [DISABLED] <- nid=35 [audio selector] [DISABLED] hdaa0: + [DISABLED] <- nid=33 [audio selector] hdaa0: hdaa0: nid: 37 hdaa0: Name: audio selector hdaa0: Widget cap: 0x0030010d hdaa0: STEREO hdaa0: Association: 1 (0x00000001) hdaa0: OSS: line hdaa0: Output amp: 0x00270300 hdaa0: mute=0 step=3 size=39 offset=0 hdaa0: connections: 1 hdaa0: | hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: hdaa0: nid: 38 [DISABLED] hdaa0: Name: vendor widget hdaa0: Widget cap: 0x00f00100 hdaa0: connections: 3 hdaa0: | hdaa0: + <- nid=20 [pin: Mic (Red Jack)] (selected) hdaa0: + <- nid=21 [pin: Mic (Fixed)] hdaa0: + <- nid=28 [pin: Mic (Red Jack)] hdaa0: pcm0: at nid 18,17 and 28,20,21 on hdaa0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: DAC: 4 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07ff pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz pcm0: DAC: 8 pcm0: DAC: 9 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=18 [pin: Speaker (Fixed)] pcm0: | pcm0: + <- nid=10 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: nid=17 [pin: Headphones (Green Jack)] pcm0: | pcm0: + <- nid=7 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=34 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=33 [audio selector] [src: mix] pcm0: | pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: pcm0: nid=8 [audio input] pcm0: | pcm0: + <- nid=12 [audio selector] [src: line, mic, mix, monitor] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: nid=9 [audio input] pcm0: | pcm0: + <- nid=13 [audio selector] [src: line, mic, mix, monitor] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=32 [audio mixer] [src: mix] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=32 [audio mixer] pcm0: | pcm0: + <- nid=20 [pin: Mic (Red Jack)] [src: mic] pcm0: + <- nid=21 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=26 [beep widget] [src: speaker] pcm0: + <- nid=37 [audio selector] [src: line] pcm0: | pcm0: + <- nid=28 [pin: Mic (Red Jack)] [src: line] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol): -58/0dB pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 14 (nid 17 in ): mute pcm0: +- ctl 15 (nid 18 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm): -58/0dB pcm0: | pcm0: +- ctl 2 (nid 4 out): -58/0dB (40 steps) pcm0: +- ctl 5 (nid 7 in 0): mute pcm0: +- ctl 7 (nid 10 in 0): mute pcm0: pcm0: Microphone Volume (OSS: mic): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 17 (nid 20 out): 0/30dB (4 steps) pcm0: +- ctl 24 (nid 32 in 0): -34/12dB (32 steps) + mute pcm0: pcm0: Microphone2 Volume (OSS: monitor): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 18 (nid 21 out): 0/30dB (4 steps) pcm0: +- ctl 25 (nid 32 in 1): -34/12dB (32 steps) + mute pcm0: pcm0: Line-in Volume (OSS: line): 0/30dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 28 (nid 32 in 4): -34/12dB (32 steps) + mute pcm0: +- ctl 32 (nid 37 out): 0/30dB (4 steps) pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -34/0dB pcm0: | pcm0: +- ctl 13 (nid 16 out): -45/0dB (16 steps) + mute pcm0: +- ctl 27 (nid 32 in 3): -34/12dB (32 steps) + mute pcm0: pcm0: Recording Level (OSS: rec): -58/22dB pcm0: | pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: pcm0: Input Mix Level (OSS: mix): -46/0dB pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: +- ctl 11 (nid 12 out): -58/22dB (55 steps) + mute pcm0: +- ctl 12 (nid 13 out): -58/22dB (55 steps) + mute pcm0: +- ctl 29 (nid 33 out): -46/0dB (32 steps) + mute pcm0: pcm0: Input Monitoring Level (OSS: igain): 0/0dB pcm0: | pcm0: +- ctl 6 (nid 7 in 1): mute pcm0: +- ctl 8 (nid 10 in 1): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 2b6b000, 10000; 0xed76b000 -> 2b6b000 pcm0: sndbuf_setmap 2bab000, 10000; 0xed7ab000 -> 2bab000 pcm0: sndbuf_setmap 3040000, 10000; 0xed7eb000 -> 3040000 pcm0: Automatically set rec source to: monitor hdacc1: at cad 1 on hdac0 hdacc1: Root Node at nid=0: 1 subnodes 2-2 unknown: at nid 2 on hdacc1 (no driver attached) mmc0: Probing bus usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found battery0: battery initialization start acpi_acad0: acline initialization start mmc0: SD probe: OK (OCR: 0x00ff8000) mmc0: Current OCR: 0x00ff8000 battery0: critically low charge! mmc0: Probing cards mmc0: New card detected (CID 035344534430314780209aeb3e005500) battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times mmc0: Card at relative address 32970 added: mmc0: card: SD (0x3/0x5344/"SD01G" rev 8.0 m/d 05.2005 s/n 209aeb3e) mmc0: bus: 4bit, 30MHz mmc0: memory: 1984000 blocks, erase sector 32 blocks mmc0: setting transfer rate to 30.000MHz mmcsd0: 968MB at mmc0 16MHz/4bit GEOM: new disk mmcsd0 mmc0: setting bus width to 4 bits GEOM_PART: partition 1 is not aligned on 16384 bytes ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 uhub2: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered ugen0.2: at usbus0 (probe0:ctl2cam0:0:1:0): Error 6, Unretryable error GEOM: new disk ada0 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number OCZ- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 pass0 at ahcich0 bus 0 scbus1 target 0 lun 0 pass0: ATA-8 SATA 2.x device pass0: Serial Number OCZ- pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 TSC timecounter disabled: C3 enabled. Timecounter "TSC" frequency 1596035728 Hz quality -1000 WARNING: WITNESS option enabled, expect reduced performance. GEOM: ada0s4: invalid disklabel. Root mount waiting for: usbus2 ugen2.2: at usbus2 umass0: on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]... mountroot: waiting for device /dev/iso9660/FREEBSD_INSTALL ... (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:0,0 (No additional sense information) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? GEOM: new disk cd0 pass1 at umass-sim0 bus 0 scbus3 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 40.000MB/s transfers cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: cd present [248942 x 2048 byte records] pass2 at umass-sim0 bus 0 scbus3 target 0 lun 1 pass2: Fixed Direct Access SCSI-4 device pass2: Serial Number PE04000000 pass2: 40.000MB/s transfers da0 at umass-sim0 bus 0 scbus3 target 0 lun 1 da0: Fixed Direct Access SCSI-4 device da0: Serial Number PE04000000 da0: 40.000MB/s transfers da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C) GEOM: new disk da0 start_init: trying /sbin/init pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of pci0:6:0:0 unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff cardbus0: Expecting link target, got 0xff cbb0: Opening memory: found-> vendor=0x168c, dev=0x0013, revid=0x01 domain=0, bus=6, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x8210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 ath0: irq 16 at device 0.0 on cardbus0 pcib3: allocated memory range (0xd4000000-0xd400ffff) for rid 10 of ath0 ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd4000000 cbb0: Opening memory: cbb0: Normal: 0xd4000000-0xd400ffff ath0: unable to attach hardware; HAL status 14 cbb0: Opening memory: device_attach: ath0 attach returned 6