From owner-freebsd-multimedia@FreeBSD.ORG Sun Oct 6 15:42:49 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 3F9F946A for ; Sun, 6 Oct 2013 15:42:49 +0000 (UTC) (envelope-from freebsd-multimedia@dino.sk) Received: from mailhost.netlab.sk (mailhost.netlab.sk [84.245.65.10]) (using SSLv3 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id C59C920CF for ; Sun, 6 Oct 2013 15:42:48 +0000 (UTC) Received: from wind.dino.sk (fw1.dino.sk [84.245.95.252]) (AUTH: LOGIN milan) by mailhost.netlab.sk with ESMTPA; Sun, 06 Oct 2013 17:42:55 +0200 id 00552C62.525184FF.0000BDF0 Date: Sun, 6 Oct 2013 17:42:41 +0200 From: Milan Obuch To: Juergen Lock Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131006174241.4d8ac3f5@wind.dino.sk> In-Reply-To: <20130909200642.GB38609@triton8.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> X-Mailer: Claws Mail 3.9.2 (GTK+ 2.24.19; i386-portbld-freebsd9.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-multimedia@freebsd.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 06 Oct 2013 15:42:49 -0000 On Mon, 9 Sep 2013 22:06:42 +0200 Juergen Lock wrote: > On Mon, Sep 09, 2013 at 09:30:44AM +0200, Milan Obuch wrote: > > On Sun, 8 Sep 2013 22:11:37 +0200 (CEST) > > Juergen Lock wrote: > > > > > In article <20130828235428.45b51b76@zeta.dino.sk> you write: [ snip ] > > > Btw is this a dual tuner i.e. do you get /dev/dvb/adapter0 and 1? > > > If yes you might want to test if it can really use both tuners or > > > if that causes stream corruptions like with my af9035 tuner. To > > > test this play two channels from different muxes, for example > > > using vdr-plugin-streamdev in parallel with watching one channel > > > via vdr-sxfe, or play two channels from different muxes both via > > > streamdev. > > > > > > > Yes it is dual tuner, which was one reason I got this one insted of > > some cheaper single tuner. I have not yet cable comfortably > > available so I can not do much tests, but I will try some time > > later. How will such corruption manifest itself? I saw on some > > DVB-T STB some artifacts, square areas affected when signal was > > weaker or disturbed, but could this be somehow distinguished? > > > Yes that's what it looks like, you can watch the uncorrected error > count via vdr-plugin-femon (UNC) provided the tuner driver reads > out that info, if it does and it's non-zero artefacts are caused > by a too weak/corrupted signal. There also is the BER value that > some more drivers read out, that can be nonzero and yet the errors > may be correctable, but if it's constantly zero you can assume > video corruptions aren't caused by the antenna signal. > I am trying to test dual channel receiving, I did not find good description how I should configure second receiver... when I changed IP in vdr_flags from 127.0.0.1 to real one, it works locally but trying to run vdr-sxfe on another box does not work, I got just kernel crash and reboot. I was under impression vdr-sxfe run with argument xvdr://IP.of.the.server should just work, which is not the case. How should I test streamdev plugin? I would expect it should be configured this plugin in vdr_flags... Also, what about femon plugin? How should it be used? On https://wiki.freebsd.org/VDR, there is some menu mentioned. When I use vdr-sxfe, there is no menu. Where is menu mentioned on wiki located and how could it be accessed? This is not clear at all from what's written there... Otherwise, it looks this device works well for usual watching, I need to find how to do some recording (not only pressing R key in vdr-sxfe) and how to play recorded program back. Regards, Milan From owner-freebsd-multimedia@FreeBSD.ORG Sun Oct 6 18:37:16 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 46561879 for ; Sun, 6 Oct 2013 18:37:16 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id BE7A82914 for ; Sun, 6 Oct 2013 18:37:15 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id 3CF9B1E007B5; Sun, 6 Oct 2013 20:37:08 +0200 (CEST) Received: from enceladus10.kn-bremen.de (noident@localhost [127.0.0.1]) by enceladus10.kn-bremen.de (8.14.5/8.14.5) with ESMTP id r96IXqvH007120; Sun, 6 Oct 2013 20:33:52 +0200 (CEST) (envelope-from nox@enceladus10.kn-bremen.de) Received: (from nox@localhost) by enceladus10.kn-bremen.de (8.14.5/8.14.5/Submit) id r96IXqjd007119; Sun, 6 Oct 2013 20:33:52 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Sun, 6 Oct 2013 20:33:52 +0200 To: Milan Obuch Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131006183352.GA6317@enceladus10.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20131006174241.4d8ac3f5@wind.dino.sk> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@freebsd.org, Juergen Lock X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 06 Oct 2013 18:37:16 -0000 On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > On Mon, 9 Sep 2013 22:06:42 +0200 > Juergen Lock wrote: > > > On Mon, Sep 09, 2013 at 09:30:44AM +0200, Milan Obuch wrote: > > > On Sun, 8 Sep 2013 22:11:37 +0200 (CEST) > > > Juergen Lock wrote: > > > > > > > In article <20130828235428.45b51b76@zeta.dino.sk> you write: > > [ snip ] > > > > > Btw is this a dual tuner i.e. do you get /dev/dvb/adapter0 and 1? > > > > If yes you might want to test if it can really use both tuners or > > > > if that causes stream corruptions like with my af9035 tuner. To > > > > test this play two channels from different muxes, for example > > > > using vdr-plugin-streamdev in parallel with watching one channel > > > > via vdr-sxfe, or play two channels from different muxes both via > > > > streamdev. > > > > > > > > > > Yes it is dual tuner, which was one reason I got this one insted of > > > some cheaper single tuner. I have not yet cable comfortably > > > available so I can not do much tests, but I will try some time > > > later. How will such corruption manifest itself? I saw on some > > > DVB-T STB some artifacts, square areas affected when signal was > > > weaker or disturbed, but could this be somehow distinguished? > > > > > Yes that's what it looks like, you can watch the uncorrected error > > count via vdr-plugin-femon (UNC) provided the tuner driver reads > > out that info, if it does and it's non-zero artefacts are caused > > by a too weak/corrupted signal. There also is the BER value that > > some more drivers read out, that can be nonzero and yet the errors > > may be correctable, but if it's constantly zero you can assume > > video corruptions aren't caused by the antenna signal. > > > > I am trying to test dual channel receiving, I did not find good > description how I should configure second receiver... vdr should pick up the second tuner automagically so there's no need to configure it explicitly. > when I changed IP > in vdr_flags from 127.0.0.1 to real one, it works locally but trying to > run vdr-sxfe on another box does not work, I got just kernel crash and > reboot. Whoops! I suppose you need to collect a backtrace of that panic... > I was under impression vdr-sxfe run with argument > xvdr://IP.of.the.server should just work, which is not the case. You may need to allow you subnet in: /usr/local/etc/vdr/plugins/xineliboutput/allowed_hosts.conf > How > should I test streamdev plugin? Make sure streamdev is enabled in vdr_flags, then just point some player like vlc at one of the streamdev channels, like: vlc http://127.1:3000/1 (the last 1 there is the channel number.) You can also point a browser at: http://127.1:3000/ to get a channel list. If you want to test the second tuner make sure the channel is on another mux than the one you're watching in vdr-sxfe or both will be received by only one tuner... Oh and there can only be one channel and osd shown by vdr-sxfe, even if you connect more than one vdr-sxfe instances over the network, that's why I suggested streamdev for testing the second tuner. > I would expect it should be configured > this plugin in vdr_flags... Yep. > Also, what about femon plugin? How should > it be used? > It shuold put an entry in the vdr osd main menu, just select that. BER and UNC (if available) readings for the currently playing channel will be shown in the top display. > On https://wiki.freebsd.org/VDR, there is some menu mentioned. When I > use vdr-sxfe, there is no menu. Where is menu mentioned on wiki located > and how could it be accessed? If you use the default /usr/local/etc/vdr/remote.conf installed by the vdr-plugin-xineliboutput port (you can look at that file!) then the menu is on the tab and insert keys in the vdr-sxfe (or softhddevice) osd. > This is not clear at all from what's > written there... > Hmm... > Otherwise, it looks this device works well for usual watching, I need > to find how to do some recording (not only pressing R key in vdr-sxfe) > and how to play recorded program back. > You can either check the epg via the osd (on screen display, Menu -> Schedule, or Menu -> Program guide if you enabled the extrecmenu plugin) in vdr-sxfe and hit Red (F4) to record the selected show, or you can use the live web plugin if you enabled that, by pointing a browser at: http://127.1:8008/ (Default login/pw is admin/live as mentioned on the wiki.) > Regards, > Milan HTH, :) Juergen From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 07:25:50 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id A1A0E2EF for ; Mon, 7 Oct 2013 07:25:50 +0000 (UTC) (envelope-from freebsd-multimedia@dino.sk) Received: from mailhost.netlab.sk (mailhost.netlab.sk [84.245.65.10]) (using SSLv3 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 4225729C9 for ; Mon, 7 Oct 2013 07:25:49 +0000 (UTC) Received: from wind.dino.sk (fw1.dino.sk [84.245.95.252]) (AUTH: LOGIN milan) by mailhost.netlab.sk with ESMTPA; Mon, 07 Oct 2013 09:25:47 +0200 id 00552C8E.525261FB.000109DB Date: Mon, 7 Oct 2013 09:25:35 +0200 From: Milan Obuch To: Juergen Lock Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131007092535.2465d875@wind.dino.sk> In-Reply-To: <20131006183352.GA6317@enceladus10.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> <20131006183352.GA6317@enceladus10.kn-bremen.de> X-Mailer: Claws Mail 3.9.2 (GTK+ 2.24.19; i386-portbld-freebsd9.2) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Cc: freebsd-multimedia@freebsd.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 07:25:50 -0000 On Sun, 6 Oct 2013 20:33:52 +0200 Juergen Lock wrote: > On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > > On Mon, 9 Sep 2013 22:06:42 +0200 > > Juergen Lock wrote: > >=20 > > > On Mon, Sep 09, 2013 at 09:30:44AM +0200, Milan Obuch wrote: > > > > On Sun, 8 Sep 2013 22:11:37 +0200 (CEST) > > > > Juergen Lock wrote: > > > >=20 > >=20 > > [ snip ] > >=20 > > > > > Btw is this a dual tuner i.e. do you get /dev/dvb/adapter0 > > > > > and 1? If yes you might want to test if it can really use > > > > > both tuners or if that causes stream corruptions like with my > > > > > af9035 tuner. To test this play two channels from different > > > > > muxes, for example using vdr-plugin-streamdev in parallel > > > > > with watching one channel via vdr-sxfe, or play two channels > > > > > from different muxes both via streamdev. > > > > > > > > >=20 > > > > Yes it is dual tuner, which was one reason I got this one > > > > insted of some cheaper single tuner. I have not yet cable > > > > comfortably available so I can not do much tests, but I will > > > > try some time later. How will such corruption manifest itself? > > > > I saw on some DVB-T STB some artifacts, square areas affected > > > > when signal was weaker or disturbed, but could this be somehow > > > > distinguished? > > > >=20 > > > Yes that's what it looks like, you can watch the uncorrected error > > > count via vdr-plugin-femon (UNC) provided the tuner driver reads > > > out that info, if it does and it's non-zero artefacts are caused > > > by a too weak/corrupted signal. There also is the BER value that > > > some more drivers read out, that can be nonzero and yet the errors > > > may be correctable, but if it's constantly zero you can assume > > > video corruptions aren't caused by the antenna signal. > > >=20 > >=20 > > I am trying to test dual channel receiving, I did not find good > > description how I should configure second receiver... >=20 > vdr should pick up the second tuner automagically so there's no > need to configure it explicitly. > OK, I supposed it, just good to have it confirmed. But, what I need to find, is how it will be started to use... I hope I will figure that out. > > when I changed IP > > in vdr_flags from 127.0.0.1 to real one, it works locally but > > trying to run vdr-sxfe on another box does not work, I got just > > kernel crash and reboot. >=20 > Whoops! I suppose you need to collect a backtrace of that panic... > It is a bit harder, it looks like this is on a bit screwed box. So I need to test it on another, fully working box, which takes some time to prepare. > > I was under impression vdr-sxfe run with argument > > xvdr://IP.of.the.server should just work, which is not the case. >=20 > You may need to allow you subnet in: >=20 > /usr/local/etc/vdr/plugins/xineliboutput/allowed_hosts.conf > This I did already, otherwise it was reported as not allowed or somesuch. > > How should I test streamdev plugin? >=20 > Make sure streamdev is enabled in vdr_flags, then just point some > player like vlc at one of the streamdev channels, like: >=20 > vlc http://127.1:3000/1 >=20 > (the last 1 there is the channel number.) >=20 > You can also point a browser at: >=20 > http://127.1:3000/ >=20 > to get a channel list. > This interface is working, and I am able to watch one channel via vdr-sxfe, the second one via vlc. Yupeeee! So this device definitely works in dual channel mode... I will try to watch it via vlc remotely - on other box, via network... but it requires a bit of time to prepare (see above :) ). > If you want to test the second tuner make sure the channel is on > another mux than the one you're watching in vdr-sxfe or both will be > received by only one tuner... > Yes, that's clear to me. I understand the concept of muxed streams. > Oh and there can only be one channel and osd shown by vdr-sxfe, even > if you connect more than one vdr-sxfe instances over the network, > that's why I suggested streamdev for testing the second tuner. >=20 > > I would expect it should be configured this plugin in vdr_flags... >=20 > Yep. >=20 > > Also, what about femon plugin? How should it be used? > >=20 > It shuold put an entry in the vdr osd main menu, just select that. > BER and UNC (if available) readings for the currently playing channel > will be shown in the top display. > Do you mean pressing Tab? Here I see Devices column at the right side. Is that displaying it? > > On https://wiki.freebsd.org/VDR, there is some menu mentioned. When > > I use vdr-sxfe, there is no menu. Where is menu mentioned on wiki > > located and how could it be accessed? >=20 > If you use the default /usr/local/etc/vdr/remote.conf installed > by the vdr-plugin-xineliboutput port (you can look at that file!) > then the menu is on the tab and insert keys in the vdr-sxfe (or > softhddevice) osd. > Ahh, finally figured that out! It happened I did not test pressing Tab key until now in vdr-sxfe... Anyway, thanks for pointing to the config file, I understand it now much better. It was just some blind testing before... > > This is not clear at all from what's written there... > >=20 > Hmm... > Or I was just blind looking here, but surely putting on this page something like short paragraph 'Accessing OSD menu - You should press Tab key' would make it clear. In my eyes this is a key information and should be properly highlighted here. Even if it seems now a bit overkill, it would saved me a bit of headache :) > > Otherwise, it looks this device works well for usual watching, I > > need to find how to do some recording (not only pressing R key in > > vdr-sxfe) and how to play recorded program back. > >=20 > You can either check the epg via the osd (on screen display, Menu > -> Schedule, or Menu -> Program guide if you enabled the extrecmenu > plugin) in vdr-sxfe and hit Red (F4) to record the selected show, > or you can use the live web plugin if you enabled that, by pointing > a browser at: >=20 > http://127.1:8008/ >=20 > (Default login/pw is admin/live as mentioned on the wiki.) >=20 I figured it out from wiki, this web plugin is just great. I feel it could be a primary interface for all my needs. There is just one big issue remaining - character encoding in all output, be it info text displayed when 'I' is pressed in OSD, short text displayed when channels are switched with 'up' or 'down' cursor key, or anything in web live interface. In slovak language (or czech, as czech TV is watched here quite often as well) we use a lot of various accented characters. All of them are displayed as ?a in OSD display (while it could be a with umlaut or accent grave - two various sounds actually), in web live they are displayed as =C3=82a instead of =C3= =A1 as it should be. I did not have any experience with writing accented characters short of copy-and-paste method, so solving this may be obvious, too, I just have no idea, how. So, basically, I am quite impressed with VDR and its web live plugin, my DVB-T stick seems to be just working really well. Thanks for your support. Regards, Milan From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 11:06:49 2013 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 652CC897 for ; Mon, 7 Oct 2013 11:06:49 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:1900:2254:206c::16:87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 338FA283D for ; Mon, 7 Oct 2013 11:06:49 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.7/8.14.7) with ESMTP id r97B6mgW077782 for ; Mon, 7 Oct 2013 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.7/8.14.7/Submit) id r97B6mIJ077780 for freebsd-multimedia@FreeBSD.org; Mon, 7 Oct 2013 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 7 Oct 2013 11:06:48 GMT Message-Id: <201310071106.r97B6mIJ077780@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-multimedia@FreeBSD.org Subject: Current problem reports assigned to freebsd-multimedia@FreeBSD.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 11:06:49 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/181964 multimedia [patch] multimedia/gstreamer-ffmpeg, multimedia/gstrea o ports/181881 multimedia audio/denemo: Update to version 1.0.6 o ports/181655 multimedia [patch] multimedia/gstreamer1-plugins-good: add more s o ports/181521 multimedia [patch] multimedia/gstreamer-ffmpeg: enable mp3 decode o ports/181519 multimedia multimedia/gstreamer-ffmpeg: an option to build agains o ports/181505 multimedia multimedia/dirac: Fix build error by CXX=clang o ports/181213 multimedia [patch] audio/twolame: add ftp/curl dependency o ports/181003 multimedia multimedia/gstreamer not build with clang o kern/180966 multimedia [snd_envy24] recording broken o ports/180906 multimedia [PATCH] multimedia/gpac-* update to 0.5.0 o ports/179942 multimedia [patch] multimedia/dvdstyler: uses wrong ffmpeg when m o ports/179799 multimedia Fix multimedia/mjpegtools on powerpc o ports/179701 multimedia [PATCH] multimedia/gstreamer: Add NLS, trim pkg-plist o ports/179121 multimedia [PATCH] graphics/exiftags: Convert to OptionsNG o kern/178671 multimedia [snd_hda] snd_hda stops working as soon as X starts o ports/178273 multimedia multimedia/gstreamer-plugins: It's hava no package of o ports/177532 multimedia multimedia/gstreamer-plugins-* ports missing dependenc o ports/177281 multimedia multimedia/avidemux2 does not compile o ports/175940 multimedia multimedia/gstreamer-plugins-good add missing dependen o kern/175306 multimedia [snd_hda] snd_hda does not produce 7.1 sound on ALC892 o kern/175220 multimedia [sound] sound stopping: play interrupt timeout, channe f ports/175008 multimedia audio/gstreamer-plugins-soundtouch C++ compiler error o kern/174828 multimedia [sound] [snd_emu10kx]: "Creative SB PCI512 [CT4790]" i o kern/174796 multimedia [emu10kx]: Audigy ZS driver produce strange noises o kern/174573 multimedia [snd_hda] headphones on front panel not working anymor o ports/174287 multimedia multimedia/gstreamer-plugins-good fails to compile wit o ports/173741 multimedia multimedia/dirac fails to compile with clang o ports/172185 multimedia multimedia/vlc build fail with gmake core dump at modu o ports/172128 multimedia building multimedia/vlc fails o kern/171937 multimedia [pcm] Notebook Toshiba Satellite C850-B1K and problem o ports/171888 multimedia [PATCH] multimedia/gpac-libgpac: update to 0.5.0,1 o ports/171248 multimedia multimedia/win32-codecs: Fix pkg-plist o ports/170517 multimedia [patch] Correct audio/jack Dependency Declaration o ports/170032 multimedia Some ports not bumped after libogg update o kern/162181 multimedia [snd_emu10k1] [patch] The kernel sound driver module s o ports/161783 multimedia [PATCH] multimedia/gpac-libgpac: Fix build with gcc46 o ports/161568 multimedia [PATCH] audio/libsamplerate: samplerate.h has comma at o kern/159236 multimedia [pcm] [patch] set PCM_CAP_DEFAULT for the default snd o kern/158979 multimedia [snd_uadio] snd_uaudio fails to initialize built-in mi o kern/158542 multimedia [snd_hda] hdac0: hdac_get_capabilities: Invalid corb s o stand/157050 multimedia OSS implementation lacks AFMT_FLOAT o kern/156198 multimedia [snd_hda] [hang] loading snd_hda kernel module hangs s o kern/156165 multimedia [hdac] Missing card definition for hdac audio device, o ports/153846 multimedia graphics/libcaca 0.99.beta17 - Hidden dependency on Xl a ports/153735 multimedia multimedia/vlc: install error: `Permission denied' for o kern/152622 multimedia [pcm] uaudio recording problem o kern/152500 multimedia [hdac] play interrupt timeout, channel dead f ports/150502 multimedia multimedia/gpac-libgpac 0.4.5_4,1 fails to compile on o kern/150284 multimedia [snd_hda] No gain with Audio o kern/149943 multimedia [pcm]: CS4236 audio problem o kern/147504 multimedia [oss] [panic] panic: dev_pager_getpage: map function r o kern/146031 multimedia [snd_hda] race condition when kldunload snd_hda sound o kern/144659 multimedia [pcm] The distortion of the sound playback of music at o kern/143505 multimedia [pcm] FreeBSD 8.0-RELEASE (x64) won't make sound card o kern/141826 multimedia [snd_hda] load of snd_hda module fails o kern/140591 multimedia [PATCH][sound] No sound output on lineout/headphone ja o kern/137589 multimedia [snd_uaudio] snd_uaudio.ko (USB audio driver) doesn't o kern/134767 multimedia [sound] [snd_hda] [regression] Sigmatel STAC9205X no s o kern/132848 multimedia [sound] [snd_emu10kx] driver problem with card init, s o kern/132511 multimedia [sound] [snd_hda] Probing ALC888 codec on ASRock K10N7 o kern/129604 multimedia [sound] Sound stops with error: pcm0:virtual:dsp0.vp0: o kern/127131 multimedia [bktr] /usr/src/sys/dev/bktr/bktr_os.c, line 469: wron s kern/125756 multimedia [sound] [patch] cannot detect soft-modem on HDA bus o kern/124319 multimedia [sound] [snd_emu10k1] [regression] Cannot record from o kern/122086 multimedia [sound] maestro sound driver is working, but mixer ini o kern/120857 multimedia [sound] [snd_emu10k1] snd_emu10k1 driver issues a warn o kern/120780 multimedia [sound] [snd_hda] snd_hda doesn't work on Dell Latitut o kern/119973 multimedia [sound] [snd_maestro] [regression] snd_maestro only wo o kern/119931 multimedia [sound] No sound card detected on ASUS "K8V-X SE R2.00 o kern/119759 multimedia [sound] [snd_emu10k1] [regression] Can not record anyt o kern/115300 multimedia [sound] [snd_hda] [regression] snd_hda(4) fails to att o kern/114760 multimedia [sound] [snd_cmi] snd_cmi driver causing sporadic syst o kern/111767 multimedia [sound] ATI SB450 High Definition Audio Controller sou o kern/107516 multimedia [sound] [snd_emu10k1] - skips, clicks and lag after a o kern/107051 multimedia [sound] only 2 channels output works for the ALC850 (o o kern/104874 multimedia [sound] [snd_emu10k1] kldload snd_emu10k1 hangs system o kern/101417 multimedia [sound] 4-speakers output not possible on Asus A8V-Del o kern/100859 multimedia [sound] [snd_ich] snd_ich broken on GIGABYTE 915 syste o kern/98752 multimedia [sound] Intel ich6 82801 FB - on Packard Bell A8810 la o kern/98504 multimedia [sound] Sound is distorted with SB Live 5.1 o kern/98496 multimedia [sound] [snd_ich] some functions don't work in my soun o kern/97609 multimedia [sound] Load Sound Module - VIA8233 - fails o kern/97535 multimedia [sound] [snd_mss] doesn't work in 6.0-RELEASE and abov o kern/96538 multimedia [sound] emu10k1-driver inverts channels o kern/95086 multimedia [sound] uaudio line in problem with sbdm lx o kern/94279 multimedia [sound] [snd_neomagic] snd_neomagic crashes on FreeBSD o kern/93986 multimedia [sound] Acer TravelMate 4652LMi pcm0 channel dead o kern/92512 multimedia [sound] distorted mono output with emu10k1 o kern/87782 multimedia [sound] snd_t4dwave and pcm0:record:0: record interrup o kern/82043 multimedia [sound] snd_emu10k1 - mixer does not work. o kern/81146 multimedia [sound] Sound isn't working AT ALL for Sis7012 onboard o kern/80632 multimedia [sound] pcm driver missing support for CMI8738 auxilla o kern/79912 multimedia [sound] sound broken for 2 VIA chipsets: interrupt sto o kern/79905 multimedia [sound] sis7018 sound module problem o kern/79678 multimedia [sound] sound works except recording from any source o conf/75137 multimedia [sound] add snd_* modules support to /etc/rc.d/mixer f kern/72995 multimedia [sound] Intel ICH2 (82801BA) - sound nearly inaudible o kern/63204 multimedia [sound] /dev/mixer broken with ESS Maestro-2E (still o o kern/60677 multimedia [sound] [patch] No reaction of volume controy key on I s kern/60599 multimedia [bktr] [partial patch] No sound for ATI TV Wonder (ste o kern/37600 multimedia [sound] [partial patch] t4dwave drive doesn't record. o kern/23546 multimedia [sound] [snd_csa] [patch] csa DMA-interrupt problem 102 problems total. From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 16:44:15 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 8393582C for ; Mon, 7 Oct 2013 16:44:15 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 0A6F120A8 for ; Mon, 7 Oct 2013 16:44:14 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id C89741E007B4; Mon, 7 Oct 2013 18:44:12 +0200 (CEST) Received: from enceladus10.kn-bremen.de (noident@localhost [127.0.0.1]) by enceladus10.kn-bremen.de (8.14.5/8.14.5) with ESMTP id r97Gfdmo049279; Mon, 7 Oct 2013 18:41:39 +0200 (CEST) (envelope-from nox@enceladus10.kn-bremen.de) Received: (from nox@localhost) by enceladus10.kn-bremen.de (8.14.5/8.14.5/Submit) id r97GfdEn049278; Mon, 7 Oct 2013 18:41:39 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Mon, 7 Oct 2013 18:41:39 +0200 To: Milan Obuch Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131007164138.GA49120@enceladus10.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> <20131006183352.GA6317@enceladus10.kn-bremen.de> <20131007092535.2465d875@wind.dino.sk> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20131007092535.2465d875@wind.dino.sk> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@freebsd.org, Juergen Lock X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 16:44:15 -0000 On Mon, Oct 07, 2013 at 09:25:35AM +0200, Milan Obuch wrote: > On Sun, 6 Oct 2013 20:33:52 +0200 > Juergen Lock wrote: > > > On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > > > On Mon, 9 Sep 2013 22:06:42 +0200 > > > Juergen Lock wrote: > > > > > > > On Mon, Sep 09, 2013 at 09:30:44AM +0200, Milan Obuch wrote: > > > > > On Sun, 8 Sep 2013 22:11:37 +0200 (CEST) > > > > > Juergen Lock wrote: > > > > > > > > > > > [ snip ] > > > > > > > > > Btw is this a dual tuner i.e. do you get /dev/dvb/adapter0 > > > > > > and 1? If yes you might want to test if it can really use > > > > > > both tuners or if that causes stream corruptions like with my > > > > > > af9035 tuner. To test this play two channels from different > > > > > > muxes, for example using vdr-plugin-streamdev in parallel > > > > > > with watching one channel via vdr-sxfe, or play two channels > > > > > > from different muxes both via streamdev. > > > > > > > > > > > > > > > > Yes it is dual tuner, which was one reason I got this one > > > > > insted of some cheaper single tuner. I have not yet cable > > > > > comfortably available so I can not do much tests, but I will > > > > > try some time later. How will such corruption manifest itself? > > > > > I saw on some DVB-T STB some artifacts, square areas affected > > > > > when signal was weaker or disturbed, but could this be somehow > > > > > distinguished? > > > > > > > > > Yes that's what it looks like, you can watch the uncorrected error > > > > count via vdr-plugin-femon (UNC) provided the tuner driver reads > > > > out that info, if it does and it's non-zero artefacts are caused > > > > by a too weak/corrupted signal. There also is the BER value that > > > > some more drivers read out, that can be nonzero and yet the errors > > > > may be correctable, but if it's constantly zero you can assume > > > > video corruptions aren't caused by the antenna signal. > > > > > > > > > > I am trying to test dual channel receiving, I did not find good > > > description how I should configure second receiver... > > > > vdr should pick up the second tuner automagically so there's no > > need to configure it explicitly. > > > > OK, I supposed it, just good to have it confirmed. But, what I need to > find, is how it will be started to use... I hope I will figure that out. > > > > when I changed IP > > > in vdr_flags from 127.0.0.1 to real one, it works locally but > > > trying to run vdr-sxfe on another box does not work, I got just > > > kernel crash and reboot. > > > > Whoops! I suppose you need to collect a backtrace of that panic... > > > > It is a bit harder, it looks like this is on a bit screwed box. So I > need to test it on another, fully working box, which takes some time to > prepare. > > > > I was under impression vdr-sxfe run with argument > > > xvdr://IP.of.the.server should just work, which is not the case. > > > > You may need to allow you subnet in: > > > > /usr/local/etc/vdr/plugins/xineliboutput/allowed_hosts.conf > > > > This I did already, otherwise it was reported as not allowed or > somesuch. > > > > How should I test streamdev plugin? > > > > Make sure streamdev is enabled in vdr_flags, then just point some > > player like vlc at one of the streamdev channels, like: > > > > vlc http://127.1:3000/1 > > > > (the last 1 there is the channel number.) > > > > You can also point a browser at: > > > > http://127.1:3000/ > > > > to get a channel list. > > > > This interface is working, and I am able to watch one channel via > vdr-sxfe, the second one via vlc. Yupeeee! So this device definitely > works in dual channel mode... That's definitely good news. > I will try to watch it via vlc remotely - > on other box, via network... but it requires a bit of time to prepare > (see above :) ). > > > If you want to test the second tuner make sure the channel is on > > another mux than the one you're watching in vdr-sxfe or both will be > > received by only one tuner... > > > > Yes, that's clear to me. I understand the concept of muxed streams. > > > Oh and there can only be one channel and osd shown by vdr-sxfe, even > > if you connect more than one vdr-sxfe instances over the network, > > that's why I suggested streamdev for testing the second tuner. > > > > > I would expect it should be configured this plugin in vdr_flags... > > > > Yep. > > > > > Also, what about femon plugin? How should it be used? > > > > > It shuold put an entry in the vdr osd main menu, just select that. > > BER and UNC (if available) readings for the currently playing channel > > will be shown in the top display. > > > > Do you mean pressing Tab? Here I see Devices column at the right side. > Is that displaying it? > Pressing tab and then selecting "Signal Information" via cursor down and then pressing OK. (return) Or if there is a digit before a main menu entry you can also press that. > > > On https://wiki.freebsd.org/VDR, there is some menu mentioned. When > > > I use vdr-sxfe, there is no menu. Where is menu mentioned on wiki > > > located and how could it be accessed? > > > > If you use the default /usr/local/etc/vdr/remote.conf installed > > by the vdr-plugin-xineliboutput port (you can look at that file!) > > then the menu is on the tab and insert keys in the vdr-sxfe (or > > softhddevice) osd. > > > > Ahh, finally figured that out! It happened I did not test pressing Tab > key until now in vdr-sxfe... Anyway, thanks for pointing to the config > file, I understand it now much better. It was just some blind testing > before... > > > > This is not clear at all from what's written there... > > > > > Hmm... > > > > Or I was just blind looking here, but surely putting on this page > something like short paragraph 'Accessing OSD menu - You should press > Tab key' would make it clear. In my eyes this is a key information and > should be properly highlighted here. Even if it seems now a bit > overkill, it would saved me a bit of headache :) > Hm actually I see I already have this, that's not enough? Quote: `I have put the menu button on the tab and insert keys and OK on the return key, see /usr/local/etc/vdr/remote.conf for the full keybindings list.' (Under: `Controlling the OSD: Keyboard (not for XBMC-PVR)'.) > > > Otherwise, it looks this device works well for usual watching, I > > > need to find how to do some recording (not only pressing R key in > > > vdr-sxfe) and how to play recorded program back. > > > > > You can either check the epg via the osd (on screen display, Menu > > -> Schedule, or Menu -> Program guide if you enabled the extrecmenu > > plugin) in vdr-sxfe and hit Red (F4) to record the selected show, > > or you can use the live web plugin if you enabled that, by pointing > > a browser at: > > > > http://127.1:8008/ > > > > (Default login/pw is admin/live as mentioned on the wiki.) > > > > I figured it out from wiki, this web plugin is just great. I feel it > could be a primary interface for all my needs. > > There is just one big issue remaining - character encoding in all > output, be it info text displayed when 'I' is pressed in OSD, short > text displayed when channels are switched with 'up' or 'down' cursor > key, or anything in web live interface. In slovak language (or czech, > as czech TV is watched here quite often as well) we use a lot of > various accented characters. All of them are displayed as ?a in OSD > display (while it could be a with umlaut or accent grave - two various > sounds actually), in web live they are displayed as Âa instead of á as > it should be. I did not have any experience with writing accented > characters short of copy-and-paste method, so solving this may be > obvious, too, I just have no idea, how. > This might just be a missing LANG setting, see the wiki under `Troubleshooting': `If the osd shows non-ASCII chars as '?' ...' > So, basically, I am quite impressed with VDR and its web live plugin, > my DVB-T stick seems to be just working really well. Thanks for your > support. > > Regards, > Milan > You are welcome! :) Juergen From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 16:48:42 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id D17BED80 for ; Mon, 7 Oct 2013 16:48:42 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 43CF62100 for ; Mon, 7 Oct 2013 16:48:41 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id 3C03E1E007B4; Mon, 7 Oct 2013 18:48:41 +0200 (CEST) Received: from enceladus10.kn-bremen.de (noident@localhost [127.0.0.1]) by enceladus10.kn-bremen.de (8.14.5/8.14.5) with ESMTP id r97Gm72W050273; Mon, 7 Oct 2013 18:48:07 +0200 (CEST) (envelope-from nox@enceladus10.kn-bremen.de) Received: (from nox@localhost) by enceladus10.kn-bremen.de (8.14.5/8.14.5/Submit) id r97Gm7Te050272; Mon, 7 Oct 2013 18:48:07 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Mon, 7 Oct 2013 18:48:07 +0200 To: Juergen Lock Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131007164807.GA50265@enceladus10.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> <20131006183352.GA6317@enceladus10.kn-bremen.de> <20131007092535.2465d875@wind.dino.sk> <20131007164138.GA49120@enceladus10.kn-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20131007164138.GA49120@enceladus10.kn-bremen.de> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@freebsd.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 16:48:42 -0000 On Mon, Oct 07, 2013 at 06:41:39PM +0200, Juergen Lock wrote: > On Mon, Oct 07, 2013 at 09:25:35AM +0200, Milan Obuch wrote: > > On Sun, 6 Oct 2013 20:33:52 +0200 > > Juergen Lock wrote: > > > > > On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > > > > On Mon, 9 Sep 2013 22:06:42 +0200 > > > > Juergen Lock wrote: > > > > > > > > > On Mon, Sep 09, 2013 at 09:30:44AM +0200, Milan Obuch wrote: > > > > > > On Sun, 8 Sep 2013 22:11:37 +0200 (CEST) > > > > > > Juergen Lock wrote: > > > > > > > > > > > > > > [ snip ] > > > > > > > > > > > Btw is this a dual tuner i.e. do you get /dev/dvb/adapter0 > > > > > > > and 1? If yes you might want to test if it can really use > > > > > > > both tuners or if that causes stream corruptions like with my > > > > > > > af9035 tuner. To test this play two channels from different > > > > > > > muxes, for example using vdr-plugin-streamdev in parallel > > > > > > > with watching one channel via vdr-sxfe, or play two channels > > > > > > > from different muxes both via streamdev. > > > > > > > > > > > > > > > > > > > Yes it is dual tuner, which was one reason I got this one > > > > > > insted of some cheaper single tuner. I have not yet cable > > > > > > comfortably available so I can not do much tests, but I will > > > > > > try some time later. How will such corruption manifest itself? > > > > > > I saw on some DVB-T STB some artifacts, square areas affected > > > > > > when signal was weaker or disturbed, but could this be somehow > > > > > > distinguished? > > > > > > > > > > > Yes that's what it looks like, you can watch the uncorrected error > > > > > count via vdr-plugin-femon (UNC) provided the tuner driver reads > > > > > out that info, if it does and it's non-zero artefacts are caused > > > > > by a too weak/corrupted signal. There also is the BER value that > > > > > some more drivers read out, that can be nonzero and yet the errors > > > > > may be correctable, but if it's constantly zero you can assume > > > > > video corruptions aren't caused by the antenna signal. > > > > > > > > > > > > > I am trying to test dual channel receiving, I did not find good > > > > description how I should configure second receiver... > > > > > > vdr should pick up the second tuner automagically so there's no > > > need to configure it explicitly. > > > > > > > OK, I supposed it, just good to have it confirmed. But, what I need to > > find, is how it will be started to use... I hope I will figure that out. > > > > > > when I changed IP > > > > in vdr_flags from 127.0.0.1 to real one, it works locally but > > > > trying to run vdr-sxfe on another box does not work, I got just > > > > kernel crash and reboot. > > > > > > Whoops! I suppose you need to collect a backtrace of that panic... > > > > > > > It is a bit harder, it looks like this is on a bit screwed box. So I > > need to test it on another, fully working box, which takes some time to > > prepare. > > > > > > I was under impression vdr-sxfe run with argument > > > > xvdr://IP.of.the.server should just work, which is not the case. > > > > > > You may need to allow you subnet in: > > > > > > /usr/local/etc/vdr/plugins/xineliboutput/allowed_hosts.conf > > > > > > > This I did already, otherwise it was reported as not allowed or > > somesuch. > > > > > > How should I test streamdev plugin? > > > > > > Make sure streamdev is enabled in vdr_flags, then just point some > > > player like vlc at one of the streamdev channels, like: > > > > > > vlc http://127.1:3000/1 > > > > > > (the last 1 there is the channel number.) > > > > > > You can also point a browser at: > > > > > > http://127.1:3000/ > > > > > > to get a channel list. > > > > > > > This interface is working, and I am able to watch one channel via > > vdr-sxfe, the second one via vlc. Yupeeee! So this device definitely > > works in dual channel mode... > > That's definitely good news. > > > I will try to watch it via vlc remotely - > > on other box, via network... but it requires a bit of time to prepare > > (see above :) ). > > > > > If you want to test the second tuner make sure the channel is on > > > another mux than the one you're watching in vdr-sxfe or both will be > > > received by only one tuner... > > > > > > > Yes, that's clear to me. I understand the concept of muxed streams. > > > > > Oh and there can only be one channel and osd shown by vdr-sxfe, even > > > if you connect more than one vdr-sxfe instances over the network, > > > that's why I suggested streamdev for testing the second tuner. > > > > > > > I would expect it should be configured this plugin in vdr_flags... > > > > > > Yep. > > > > > > > Also, what about femon plugin? How should it be used? > > > > > > > It shuold put an entry in the vdr osd main menu, just select that. > > > BER and UNC (if available) readings for the currently playing channel > > > will be shown in the top display. > > > > > > > Do you mean pressing Tab? Here I see Devices column at the right side. > > Is that displaying it? > > > Pressing tab and then selecting "Signal Information" via cursor down > and then pressing OK. (return) > > Or if there is a digit before a main menu entry you can also press that. > > > > > On https://wiki.freebsd.org/VDR, there is some menu mentioned. When > > > > I use vdr-sxfe, there is no menu. Where is menu mentioned on wiki > > > > located and how could it be accessed? > > > > > > If you use the default /usr/local/etc/vdr/remote.conf installed > > > by the vdr-plugin-xineliboutput port (you can look at that file!) > > > then the menu is on the tab and insert keys in the vdr-sxfe (or > > > softhddevice) osd. > > > > > > > Ahh, finally figured that out! It happened I did not test pressing Tab > > key until now in vdr-sxfe... Anyway, thanks for pointing to the config > > file, I understand it now much better. It was just some blind testing > > before... > > > > > > This is not clear at all from what's written there... > > > > > > > Hmm... > > > > > > > Or I was just blind looking here, but surely putting on this page > > something like short paragraph 'Accessing OSD menu - You should press > > Tab key' would make it clear. In my eyes this is a key information and > > should be properly highlighted here. Even if it seems now a bit > > overkill, it would saved me a bit of headache :) > > > Hm actually I see I already have this, that's not enough? Quote: > > `I have put the menu button on the tab and insert keys and OK on the return key, see > > /usr/local/etc/vdr/remote.conf > > for the full keybindings list.' > > (Under: `Controlling the OSD: Keyboard (not for XBMC-PVR)'.) > ..or maybe I should have better asked, how would you word it? Thanx, :) Juergen > > > > Otherwise, it looks this device works well for usual watching, I > > > > need to find how to do some recording (not only pressing R key in > > > > vdr-sxfe) and how to play recorded program back. > > > > > > > You can either check the epg via the osd (on screen display, Menu > > > -> Schedule, or Menu -> Program guide if you enabled the extrecmenu > > > plugin) in vdr-sxfe and hit Red (F4) to record the selected show, > > > or you can use the live web plugin if you enabled that, by pointing > > > a browser at: > > > > > > http://127.1:8008/ > > > > > > (Default login/pw is admin/live as mentioned on the wiki.) > > > > > > > I figured it out from wiki, this web plugin is just great. I feel it > > could be a primary interface for all my needs. > > > > There is just one big issue remaining - character encoding in all > > output, be it info text displayed when 'I' is pressed in OSD, short > > text displayed when channels are switched with 'up' or 'down' cursor > > key, or anything in web live interface. In slovak language (or czech, > > as czech TV is watched here quite often as well) we use a lot of > > various accented characters. All of them are displayed as ?a in OSD > > display (while it could be a with umlaut or accent grave - two various > > sounds actually), in web live they are displayed as Âa instead of á as > > it should be. I did not have any experience with writing accented > > characters short of copy-and-paste method, so solving this may be > > obvious, too, I just have no idea, how. > > > This might just be a missing LANG setting, see the wiki under > `Troubleshooting': `If the osd shows non-ASCII chars as '?' ...' > > > So, basically, I am quite impressed with VDR and its web live plugin, > > my DVB-T stick seems to be just working really well. Thanks for your > > support. > > > > Regards, > > Milan > > > You are welcome! :) > Juergen From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 18:07:38 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 261B5FDD for ; Mon, 7 Oct 2013 18:07:38 +0000 (UTC) (envelope-from freebsd-multimedia@dino.sk) Received: from mailhost.netlab.sk (mailhost.netlab.sk [84.245.65.10]) (using SSLv3 with cipher DHE-RSA-CAMELLIA256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 943E9268E for ; Mon, 7 Oct 2013 18:07:37 +0000 (UTC) Received: from wind.dino.sk (fw1.dino.sk [84.245.95.252]) (AUTH: LOGIN milan) by mailhost.netlab.sk with ESMTPA; Mon, 07 Oct 2013 20:07:32 +0200 id 00552C8F.5252F864.000046AF Date: Mon, 7 Oct 2013 20:07:23 +0200 From: Milan Obuch To: Juergen Lock Subject: Re: ITE Technologies, Inc. DVB-T TV Stick [success report] Message-ID: <20131007200723.03d72d72@wind.dino.sk> In-Reply-To: <20131007164138.GA49120@enceladus10.kn-bremen.de> References: <20130827230542.4b443eaf@zeta.dino.sk> <521D93E4.5070606@bitfrost.no> <20130828121240.7bf77ae1@zeta.dino.sk> <201309082011.r88KBbx7079350@triton8.kn-bremen.de> <20130909093044.76c70f25@zeta.dino.sk> <20130909200642.GB38609@triton8.kn-bremen.de> <20131006174241.4d8ac3f5@wind.dino.sk> <20131006183352.GA6317@enceladus10.kn-bremen.de> <20131007092535.2465d875@wind.dino.sk> <20131007164138.GA49120@enceladus10.kn-bremen.de> X-Mailer: Claws Mail 3.9.2 (GTK+ 2.24.19; i386-portbld-freebsd9.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-multimedia@freebsd.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 18:07:38 -0000 On Mon, 7 Oct 2013 18:41:39 +0200 Juergen Lock wrote: > On Mon, Oct 07, 2013 at 09:25:35AM +0200, Milan Obuch wrote: > > On Sun, 6 Oct 2013 20:33:52 +0200 > > Juergen Lock wrote: > > > > > On Sun, Oct 06, 2013 at 05:42:41PM +0200, Milan Obuch wrote: > > > > [ snip ] > > > > I would expect it should be configured this plugin in > > > > vdr_flags... > > > > > > Yep. > > > > > > > Also, what about femon plugin? How should it be used? > > > > > > > It shuold put an entry in the vdr osd main menu, just select > > > that. BER and UNC (if available) readings for the currently > > > playing channel will be shown in the top display. > > > > > > > Do you mean pressing Tab? Here I see Devices column at the right > > side. Is that displaying it? > > > Pressing tab and then selecting "Signal Information" via cursor down > and then pressing OK. (return) > > Or if there is a digit before a main menu entry you can also press > that. > I found it and now grasp the menu concept... > > > > On https://wiki.freebsd.org/VDR, there is some menu mentioned. > > > > When I use vdr-sxfe, there is no menu. Where is menu mentioned > > > > on wiki located and how could it be accessed? > > > > > > If you use the default /usr/local/etc/vdr/remote.conf installed > > > by the vdr-plugin-xineliboutput port (you can look at that file!) > > > then the menu is on the tab and insert keys in the vdr-sxfe (or > > > softhddevice) osd. > > > > > > > Ahh, finally figured that out! It happened I did not test pressing > > Tab key until now in vdr-sxfe... Anyway, thanks for pointing to the > > config file, I understand it now much better. It was just some > > blind testing before... > > > > > > This is not clear at all from what's written there... > > > > > > > Hmm... > > > > > > > Or I was just blind looking here, but surely putting on this page > > something like short paragraph 'Accessing OSD menu - You should > > press Tab key' would make it clear. In my eyes this is a key > > information and should be properly highlighted here. Even if it > > seems now a bit overkill, it would saved me a bit of headache :) > > > Hm actually I see I already have this, that's not enough? Quote: > > `I have put the menu button on the tab and insert keys and OK on the > return key, see > > /usr/local/etc/vdr/remote.conf > > for the full keybindings list.' > > (Under: `Controlling the OSD: Keyboard (not for XBMC-PVR)'.) > You are right, I was blind, somehow. What I suggest, now, after re-reading a bit what's there, is some formatting change. Whole 'Controlling the OSD: Keyboard' part is one bullet under one paragraph. Just some indented file names, command examples etc. Maybe that's actually reason I did not find it at the first glance. As accessing menu (using tab or ins key) is the most important information in this paragraph, it should have been properly highlighted. That's all. [ snip ] Thanks for all the work done on VDR, it's really appreciated. Regards, Milan From owner-freebsd-multimedia@FreeBSD.ORG Mon Oct 7 23:03:38 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id E8F6E759 for ; Mon, 7 Oct 2013 23:03:38 +0000 (UTC) (envelope-from faber@lunabase.org) Received: from lunabase.org (adsl-63-200-244-106.dsl.lsan03.pacbell.net [63.200.244.106]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 85B5A2C42 for ; Mon, 7 Oct 2013 23:03:38 +0000 (UTC) Received: from vim.isi.edu (vim.isi.edu [128.9.168.184]) (authenticated bits=0) by lunabase.org (8.14.7/8.14.7) with ESMTP id r97Mk3O7036060 (version=TLSv1/SSLv3 cipher=DHE-RSA-CAMELLIA256-SHA bits=256 verify=NO); Mon, 7 Oct 2013 15:46:11 -0700 (PDT) (envelope-from faber@lunabase.org) Message-ID: <525339AA.9090700@lunabase.org> Date: Mon, 07 Oct 2013 15:46:02 -0700 From: Ted Faber User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: freebsd-multimedia@freebsd.org Subject: Patch to /usr/ports/multimedia/gstreamer-plugins/Makefile.common for x264 version bump X-Enigmail-Version: 1.5.2 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="wsjO7vlnwDkRiO263kfbniB4j9sdNvigk" Cc: faber@lunabase.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 23:03:39 -0000 This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --wsjO7vlnwDkRiO263kfbniB4j9sdNvigk Content-Type: multipart/mixed; boundary="------------050006080104010503060508" This is a multi-part message in MIME format. --------------050006080104010503060508 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I needed to apply the attached patch to get gstreamer-plugins-x264 to compile from ports. It just sets the shared library version to the newest version in ports. (The patch is against Makefile.common in multimedia/gstreamer-plugins) --=20 http://www.lunabase.org/~faber Unexpected attachment? http://www.lunabase.org/~faber/FAQ.html#SIG --------------050006080104010503060508 Content-Type: text/plain; charset=UTF-8; name="patch" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="patch" --- /usr/ports/multimedia/gstreamer-plugins/Makefile.common.orig 2013-10-= 07 15:40:12.000000000 -0700 +++ /usr/ports/multimedia/gstreamer-plugins/Makefile.common 2013-10-07 15= :35:00.000000000 -0700 @@ -582,7 +582,7 @@ gst_vp8_DIST=3D bad =20 # x264 -gst_x264_LIB_DEPENDS+=3D x264.125:${PORTSDIR}/multimedia/x264 +gst_x264_LIB_DEPENDS+=3D x264.136:${PORTSDIR}/multimedia/x264 gst_x264_PLIST_FILES=3D ${GST_LIB_DIR}/libgstx264.la \ ${GST_LIB_DIR}/libgstx264.so \ share/gstreamer-${VERSION}/presets/GstX264Enc.prs --------------050006080104010503060508-- --wsjO7vlnwDkRiO263kfbniB4j9sdNvigk Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlJTOaoACgkQaUz3f+Zf+XvLRACgrrhF6KXcCwtgmb4FKcdAuZbW YN4AoJvk7d/H50w2TmnGhI3fMJso+zma =YAaR -----END PGP SIGNATURE----- --wsjO7vlnwDkRiO263kfbniB4j9sdNvigk-- From owner-freebsd-multimedia@FreeBSD.ORG Tue Oct 8 09:16:24 2013 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id E1A43A7E for ; Tue, 8 Oct 2013 09:16:24 +0000 (UTC) (envelope-from portscout@FreeBSD.org) Received: from portscout.freebsd.org (unknown [IPv6:2001:1900:2254:206a::50:123]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id CF3042104 for ; Tue, 8 Oct 2013 09:16:24 +0000 (UTC) Received: from portscout.freebsd.org ([127.0.1.123]) by portscout.freebsd.org (8.14.7/8.14.7) with ESMTP id r989GO2O015795 for ; Tue, 8 Oct 2013 09:16:24 GMT (envelope-from portscout@portscout.freebsd.org) Received: (from portscout@localhost) by portscout.freebsd.org (8.14.7/8.14.6/Submit) id r989GODH015794; Tue, 8 Oct 2013 09:16:24 GMT (envelope-from portscout) Message-Id: <201310080916.r989GODH015794@portscout.freebsd.org> Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain MIME-Version: 1.0 Date: Tue, 8 Oct 2013 09:16:24 +0000 From: portscout@FreeBSD.org To: multimedia@freebsd.org Subject: FreeBSD ports you maintain which are out of date X-Mailer: portscout/0.8.1 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Oct 2013 09:16:24 -0000 Dear port maintainer, The portscout new distfile checker has detected that one or more of your ports appears to be out of date. Please take the opportunity to check each of the ports listed below, and if possible and appropriate, submit/commit an update. If any ports have already been updated, you can safely ignore the entry. You will not be e-mailed again for any of the port/version combinations below. Full details can be found at the following URL: http://portscout.freebsd.org/multimedia@freebsd.org.html Port | Current version | New version ------------------------------------------------+-----------------+------------ audio/nas | 1.9.3 | 1.9.4 ------------------------------------------------+-----------------+------------ If any of the above results are invalid, please check the following page for details on how to improve portscout's detection and selection of distfiles on a per-port basis: http://portscout.freebsd.org/info/portscout-portconfig.txt If wish to stop receiving portscout reminders, please contact portscout@FreeBSD.org Thanks. From owner-freebsd-multimedia@FreeBSD.ORG Thu Oct 10 14:15:14 2013 Return-Path: Delivered-To: multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 2276BB82 for ; Thu, 10 Oct 2013 14:15:14 +0000 (UTC) (envelope-from jau@oxit.fi) Received: from smtp.oxit.fi (smtp.oxit.fi [193.185.41.132]) by mx1.freebsd.org (Postfix) with ESMTP id D34672F49 for ; Thu, 10 Oct 2013 14:15:13 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by smtp.oxit.fi (Postfix) with ESMTP id 21B0E6C37EB for ; Thu, 10 Oct 2013 17:09:06 +0300 (EEST) X-Virus-Scanned: Debian amavisd-new at smtp.oxit.fi Received: from smtp.oxit.fi ([127.0.0.1]) by localhost (huskvarna.oxit.fi [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id XCyPVA9HdBa9 for ; Thu, 10 Oct 2013 17:09:02 +0300 (EEST) Received: from [83.145.205.163] (xdsl-205-163.nblnetworks.fi [83.145.205.163]) by smtp.oxit.fi (Postfix) with ESMTPSA id BC2786C01BB for ; Thu, 10 Oct 2013 17:09:01 +0300 (EEST) Message-ID: <5256B4F7.4060602@oxit.fi> Date: Thu, 10 Oct 2013 17:08:55 +0300 From: Jukka Ukkonen User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: multimedia@FreeBSD.org Subject: VLC build on FreeBSD-9.2 fails X-Enigmail-Version: 1.5.2 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Oct 2013 14:15:14 -0000 Build of vlc fails. See details below... PORTNAME= vlc DISTVERSION= 2.0.8a PORTREVISION= 1 PORTEPOCH= 4 Then the actual build error message and some context... Making all in lua gmake[3]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules/lua' gmake all-am gmake[4]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules/lua' gmake[4]: Nothing to be done for `all-am'. gmake[4]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules/lua' gmake[3]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules/lua' Making all in . gmake[3]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules' gmake[3]: Nothing to be done for `all-am'. gmake[3]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules' gmake[2]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/modules' Making all in lib gmake[2]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/lib' gmake all-am gmake[3]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/lib' gmake[3]: Nothing to be done for `all-am'. gmake[3]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/lib' gmake[2]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/lib' Making all in bin gmake[2]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/bin' GEN ../modules/plugins.dat gmake[2]: *** [../modules/plugins.dat] Segmentation fault: 11 (core dumped) gmake[2]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/bin' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8' gmake: *** [all] Error 2 *** [do-build] Error code 1 Stop in /usr/ports/multimedia/vlc. *** [build] Error code 1 Stop in /usr/ports/multimedia/vlc. I hope this helps. --jau From owner-freebsd-multimedia@FreeBSD.ORG Fri Oct 11 09:07:52 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 408DA4F5 for ; Fri, 11 Oct 2013 09:07:52 +0000 (UTC) (envelope-from prvs=0996b0a6c0=ob@gruft.de) Received: from main.mx.e-gitt.net (service.rules.org [IPv6:2001:1560:2342::2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 1B83F22B4 for ; Fri, 11 Oct 2013 09:07:51 +0000 (UTC) Received: from ob by main.mx.e-gitt.net with local (Exim 4.80.1 (FreeBSD)) (envelope-from ) id 1VUYhD-000FWv-LC for freebsd-multimedia@freebsd.org; Fri, 11 Oct 2013 11:07:43 +0200 Date: Fri, 11 Oct 2013 11:07:43 +0200 From: Oliver Brandmueller To: freebsd-multimedia@freebsd.org Subject: Re: VLC build on FreeBSD-9.2 fails Message-ID: <20131011090743.GA2259@e-Gitt.NET> Mail-Followup-To: freebsd-multimedia@freebsd.org References: <5256B4F7.4060602@oxit.fi> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5256B4F7.4060602@oxit.fi> X-Face: "TT~P'b_)-jKU_0^a=usXryz`YTz)z.[FZrI,A~PREI2U}frrZ`>_J&; ^t|^.dR/mqtC,Vb.Y>~u8(|aL)vAv(k">zY"]*m*y|b8S7:WK[/qP5i>HO#Ek; C[X:b|FP0*Ly_4Ni User-Agent: Mutt/1.5.21 (2010-09-15) Sender: Oliver Brandmueller X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Oct 2013 09:07:52 -0000 Hi, On Thu, Oct 10, 2013 at 05:08:55PM +0300, Jukka Ukkonen wrote: > gmake[2]: Entering directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/bin' > GEN ../modules/plugins.dat > gmake[2]: *** [../modules/plugins.dat] Segmentation fault: 11 (core dumped) > gmake[2]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8/bin' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory `/usr/ports/multimedia/vlc/work/vlc-2.0.8' > gmake: *** [all] Error 2 > *** [do-build] Error code 1 I had the same. Building vlc just with the default config (go to porets directory, "make rmconfig", then with next config just don't change anything) works, though. I haven't checked, which of the plugins causes the compile to fail in the end. - Oliver -- | Oliver Brandmueller http://sysadm.in/ ob@sysadm.in | | Ich bin das Internet. Sowahr ich Gott helfe. | From owner-freebsd-multimedia@FreeBSD.ORG Fri Oct 11 16:47:58 2013 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id ED1F1764 for ; Fri, 11 Oct 2013 16:47:58 +0000 (UTC) (envelope-from sean_bruno@yahoo.com) Received: from nm28-vm5.bullet.mail.ne1.yahoo.com (nm28-vm5.bullet.mail.ne1.yahoo.com [98.138.91.250]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 7080D22A7 for ; Fri, 11 Oct 2013 16:47:57 +0000 (UTC) Received: from [98.138.90.52] by nm28.bullet.mail.ne1.yahoo.com with NNFMP; 11 Oct 2013 16:47:56 -0000 Received: from [98.138.226.62] by tm5.bullet.mail.ne1.yahoo.com with NNFMP; 11 Oct 2013 16:47:56 -0000 Received: from [127.0.0.1] by smtp213.mail.ne1.yahoo.com with NNFMP; 11 Oct 2013 16:47:56 -0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1381510076; bh=kLemeoTF1V4u5Y/9V6kjzu3k4otxyFTdnSrt5hlLh2E=; h=X-Yahoo-Newman-Id:X-Yahoo-Newman-Property:X-YMail-OSG:X-Yahoo-SMTP:X-Rocket-Received:Subject:From:Reply-To:To:Content-Type:Date:Message-ID:Mime-Version:X-Mailer; b=If0q7ahg9DN4YzioX+74JIWM6C6q2U54Iitw/nBSPcVd7sFBeBJcghv62AIAoLQ72Khemn/a9qq6bogKYY0WzEF7julSsesCylglckTPznNAx40UORGRLHmefebeR2b+fBr01A/ohtVddl+Sxly5i8x5WHZRl1cw32z8Cgjs5Uk= X-Yahoo-Newman-Id: 428372.57591.bm@smtp213.mail.ne1.yahoo.com X-Yahoo-Newman-Property: ymail-3 X-YMail-OSG: OitcrbYVM1l7X_lPixVa08zjVSfU8hDSP851gHiIQ7iQJr8 8_s.KjSBojY0cVtqe.1Qy0cN_r.d7jAMip.hhQ7X._nZG95sTsvaZup9k3oE SxspepLJVa4AkuMNYn2leFDirUUkJixfHOiFV44qlWaYCK9w2XXsKf.KIyfe DQ12_u8lZXwC_2AagDJomuukoHr336moRFYx9t_kDC8Y8rqGjleA4MrlUWz3 EWsKshvLz.jc9T1vuM9n3I0V0XDpHfJu3VQVrsTXfbczo02ShWydJ.6XsTAr Q4qC2Vh_Qsq9wY9OODdtw10p5TbLSx6So1fVXuuvZIfc_FBA_TfWH0KqydLq uV9hVPJSxwlFfzp4qd3DFUg1XZ9jsk9gIAQ51ZiTWbCMXerMttuB94OT4dRL NMYlAUSQW7PaFvhEmBS9HEkwFFZvrlYWo0Eufh123k550W.lOr70rg.Brm0o OLlsPXyMGT_6Kpkn65j.F5e3eiqvS4a7a8Vrcdt9d.VVXTx7FJJV2h9sD34w K_ZPcYtvvJK2onhQ9dn1hp1VBBIJ_xAcKO9N_d6p6UXR9mXKwc9PWHpTKSjA rq6WyqmY- X-Yahoo-SMTP: u5BKR6OswBC_iZJVfGRoMkTIpc8pEA4- X-Rocket-Received: from [10.73.160.242] (sean_bruno@209.131.62.116 with ) by smtp213.mail.ne1.yahoo.com with SMTP; 11 Oct 2013 09:47:56 -0700 PDT Subject: Webcam on Lenovo T520 From: Sean Bruno To: freebsd-multimedia Content-Type: multipart/signed; micalg="pgp-sha1"; protocol="application/pgp-signature"; boundary="=-h4dTCDzLxxboWYs/wyIP" Date: Fri, 11 Oct 2013 09:47:55 -0700 Message-ID: <1381510075.2779.1.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.32.1 FreeBSD GNOME Team Port X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list Reply-To: sbruno@freebsd.org List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Oct 2013 16:47:59 -0000 --=-h4dTCDzLxxboWYs/wyIP Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I'm not quite sure how to get webcams working in BSD. The integrated webcam on my T520 seems to be listed as a USB device: ugen0.7: at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (200mA) I installed cuse4bsd and webcamd, but nothing seems to let it become a capture device with vlc nor be available for skype. Thoughts? Sean --=-h4dTCDzLxxboWYs/wyIP Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (FreeBSD) iQEcBAABAgAGBQJSWCu3AAoJEBkJRdwI6BaHb9EH/jDFsIPikyvExsafN5W9d3AR 9mJsFvpKlEEtVIg8cdsaPCOi+2Wnbq5O7NEydS+sdhsCagzCPe/+fzbnIhLGN+yj Cfy8uKYxml1ND7tarfy88M0+XcYbLnNbLau5EggYjM6IbS0SwfPezbSEU5E7VI0X 3jjFm8Ve8plwjOGbrKzhx8feTRs+NhaEChAMQwxS5noQ3+dCO0fGfpZTwPA55LMY n04sXWz6xYsxCwc1xzL3lJPlQlblrnKLbxd+bjR8bxkB6kQoKq9Pj+VCN/fBLdhz HghV6Vx4e4eVhbQjppniLPKu4msoveZTT4PBOxdtUpUu2U8f5YfPvmohnsrEJ5Y= =IrA2 -----END PGP SIGNATURE----- --=-h4dTCDzLxxboWYs/wyIP--