From owner-freebsd-scsi@FreeBSD.ORG Sun Nov 2 21:34:31 2014 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id AEAF525E for ; Sun, 2 Nov 2014 21:34:31 +0000 (UTC) Received: from mail-vc0-f170.google.com (mail-vc0-f170.google.com [209.85.220.170]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 533C68E7 for ; Sun, 2 Nov 2014 21:34:30 +0000 (UTC) Received: by mail-vc0-f170.google.com with SMTP id la4so4351923vcb.29 for ; Sun, 02 Nov 2014 13:34:24 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc:content-type; bh=/Yai3H1eilsigmbZPel37YDYTSMgKK7QCALgDTL/M/U=; b=ZfV/ZmKKnq6CShOXsYHZlbZHBiANtqYJYe5lVX1wZCjgZnRDrLAoVAC9FPg8pGt6jC quDBVaHMMckzLvs7T0g8ruAN3tt2ENvzjuIEQHa9VLI98O/ywxBt1O0D83gP0zFpwPAC bQmmTyzyKA6P6D/SKfjoFIgT4e175ol1qhyQswxXLbiCi5j3PLqAYnuTLfp6PiOYtc/M 2I+GzCkV1Qm5iiSJ56MFesbOVyNhVNTEqPQw91S0cZIAxzO5fHt36DaRBGsFAi5GaljZ FvIQcyev8Ey+9saL+mCz1ynZFw6LJ7mrdeCkKRUecV7wlvkmBzGjqHLG9Sp/0bGoSyhX WEVg== X-Gm-Message-State: ALoCoQmo0zdJamcxHVxN9HYmFRo/x5x6yDSOcc5Ck5bZ7pF8YxwliuUus1YicCcH5giDdcB9mbJ5 X-Received: by 10.220.188.131 with SMTP id da3mr29743116vcb.10.1414964064319; Sun, 02 Nov 2014 13:34:24 -0800 (PST) MIME-Version: 1.0 Received: by 10.31.172.86 with HTTP; Sun, 2 Nov 2014 13:34:04 -0800 (PST) X-Originating-IP: [174.50.25.169] In-Reply-To: References: From: Wes Morgan Date: Sun, 2 Nov 2014 15:34:04 -0600 Message-ID: Subject: Re: MPS driver and latest firmware To: Borja Marcos Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.18-1 Cc: freebsd-scsi@freebsd.org X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 02 Nov 2014 21:34:31 -0000 I was updating the firmware hoping that the targets went back to being assigned in "next available" order rather than sticky. I like each bay to have a specific device name, which is impossible due to the "remembered" target IDs. On Mon, Oct 27, 2014 at 11:20 AM, Borja Marcos wrote: > > On Oct 26, 2014, at 11:00 PM, Wes Morgan wrote: > > > Hi all, > > > > I have an LSI 9201-16I controller that I updated to the latest firmware > > (20.00.00.00). Immediately I began seeing CAM errors like this: > > > > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): CAM status: SCSI > > Status Error > > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI status: Check > > Condition > > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI sense: ABORTED > > COMMAND asc:47,3 (Information unit iuCRC error detected) > > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): Retrying command > (per > > sense data) > > > > It did not seem to cause any data corruption, but needless to say that > kind > > of error is disconcerting. I was able to force a downgrade to the > > 19.00.00.00 firmware in FreeDOS, after which everything returned to > normal. > > I tried in a full functional system and I also suffered errors. > > I had to downgrade as well. In case anyone runs into the same problem, > the card required a flash erase (sas2flsh -o -e 6) before being able to > upload > the P19 firmware, as the NVRAM data was migrated to a new format. > > I wonder if the NVRAM changes include that "sticky" target ID behavior... > > And no, this is not a production system, just testing ;) > > > Cheers, > > > > > > > > Borja. > > > ----------- > > > > This is some log information from my change. > > I upgraded the firmware to P20 from sas2flash running on FreeBSD. Before > doing it I exported the ZFS pool > in order to avoid aborted commands leading to corruption. > > This is the syslog showing the controller having problems after the > update to P20: > > Oct 27 16:26:07 elibm kernel: mps0: Reinitializing controller, > Oct 27 16:26:15 elibm kernel: mps0: Warning: io_cmds_active is out of sync > - resynching to 0 > Oct 27 16:26:16 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:26:16 elibm kernel: mps0: IOCCapabilities: > 1285c > Oct 27 16:26:16 elibm kernel: mps0: mps_reinit finished sc > 0xfffffe0000d84000 post 4 free 3 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 > e3 d3 38 00 00 e0 00 length 114688 SMID 706 command timeout cm > 0xfffffe04976a1ea0 ccb 0xfffff80a8d573800 > Oct 27 16:28:30 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 > Aborting command 0xfffffe04976a1ea0 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 > e3 d2 58 00 00 e0 00 length 114688 SMID 738 command timeout cm > 0xfffffe04976a48a0 ccb 0xfffff80a8d5bc800 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 > e3 d2 58 00 00 e0 00 length 114688 SMID 738 terminated ioc 804b scsi 0 > state c xfer 112648 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 > e3 d3 38 00 00 e0 00 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): CAM status: Command > timeout > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): Retrying command > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 > e3 d3 38 00 00 e0 00 > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status > Error > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check > Condition > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT > ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): Retrying command (per > sense data) > Oct 27 16:29:31 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 > 25 48 00 00 e0 00 length 114688 SMID 995 command timeout cm > 0xfffffe04976b99f0 ccb 0xfffff80a3b6c5000 > Oct 27 16:29:31 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 > Aborting command 0xfffffe04976b99f0 > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 > 25 48 00 00 e0 00 > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: Command timeout > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 > 25 48 00 00 e0 00 > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status > Error > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check > Condition > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command (per > sense data) > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 11 26 50 00 00 e0 00 length 114688 SMID 358 command timeout cm > 0xfffffe04976855e0 ccb 0xfffff8017f856800 > Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 > Aborting command 0xfffffe04976855e0 > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 > 11 26 30 00 00 e0 00 length 114688 SMID 432 command timeout cm > 0xfffffe049768b700 ccb 0xfffff80a8d5e8800 > Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 4 > Aborting command 0xfffffe049768b700 > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 > 11 25 50 00 00 e0 00 length 114688 SMID 356 command timeout cm > 0xfffffe0497685340 ccb 0xfffff80a3b9c1000 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 > 70 6a 10 00 00 10 00 length 8192 SMID 346 command timeout cm > 0xfffffe0497684620 ccb 0xfffff80a8d5af000 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 > 70 68 10 00 00 10 00 length 8192 SMID 500 command timeout cm > 0xfffffe0497691040 ccb 0xfffff80a8d57c000 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(6). CDB: 08 00 02 10 > 10 00 length 8192 SMID 371 command timeout cm 0xfffffe04976866f0 ccb > 0xfffff80a8d56c800 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 11 27 30 00 00 e0 00 length 114688 SMID 321 command timeout cm > 0xfffffe0497682550 ccb 0xfffff80a915c5000 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 11 26 50 00 00 e0 00 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 > 70 6a 10 00 00 10 00 length 8192 SMID 346 terminated ioc 804b scsi 0 state > c xfer (da5:mps0:0:14:0): CAM status: Command timeout > Oct 27 16:30:33 elibm kernel: (da5: (da5:mps0:0:14:0): READ(10). CDB: > 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 500 terminated ioc 804b scsi > 0 state c xfer mps0:0:0 > Oct 27 16:30:33 elibm kernel: 14: (da5:mps0:0:14:0): READ(6). CDB: > 08 00 02 10 10 00 length 8192 SMID 371 terminated ioc 804b scsi 0 state c > xfer 0 > Oct 27 16:30:33 elibm kernel: 0): (da5:mps0:0:14:0): READ(10). CDB: > 28 00 01 11 27 30 00 00 e0 00 length 114688 SMID 321 terminated ioc 804b > scsi 0 state c xfeRetrying command > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 > 11 25 50 00 00 e0 00 length 114688 SMID 356 terminated ioc 804b scsi 0 > state c xfer 112648 > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 > 11 26 30 00 00 e0 00 > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): CAM status: Command > timeout > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): Retrying command > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 > 11 26 30 00 00 e0 00 > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 > 70 6a 10 00 00 10 00 > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status > Error > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status > Error > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check > Condition > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check > Condition > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT > ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT > ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:30:34 elibm kernel: (da2:(da5:mps0:0:mps0:0:11:14:0): 0): > Retrying command (per sense data) > Oct 27 16:36:28 elibm kernel: mps0: port 0x3f00-0x3fff mem > 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17 > Oct 27 16:36:28 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:36:28 elibm kernel: mps0: IOCCapabilities: > 1285c > Oct 27 16:36:28 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 > Oct 27 16:36:28 elibm kernel: ses1 at mps0 bus 0 scbus0 target 26 lun 0 > Oct 27 16:36:28 elibm kernel: da0 at mps0 bus 0 scbus0 target 9 lun 0 > Oct 27 16:36:28 elibm kernel: da1 at mps0 bus 0 scbus0 target 10 lun 0 > Oct 27 16:36:28 elibm kernel: da2 at mps0 bus 0 scbus0 target 11 lun 0 > Oct 27 16:36:28 elibm kernel: da3 at mps0 bus 0 scbus0 target 12 lun 0 > Oct 27 16:36:28 elibm kernel: da5 at mps0 bus 0 scbus0 target 14 lun 0 > Oct 27 16:36:28 elibm kernel: da4 at mps0 bus 0 scbus0 target 13 lun 0 > Oct 27 16:36:28 elibm kernel: da6 at mps0 bus 0 scbus0 target 17 lun 0 > Oct 27 16:36:28 elibm kernel: da7 at mps0 bus 0 scbus0 target 18 lun 0 > Oct 27 16:36:28 elibm kernel: da9 at mps0 bus 0 scbus0 target 21 lun 0 > Oct 27 16:36:28 elibm kernel: da8 at mps0 bus 0 scbus0 target 20 lun 0 > Oct 27 16:36:28 elibm kernel: da12 at mps0 bus 0 scbus0 target 27 lun 0 > Oct 27 16:36:28 elibm kernel: da10 at mps0 bus 0 scbus0 target 22 lun 0 > Oct 27 16:36:28 elibm kernel: da11 at mps0 bus 0 scbus0 target 23 lun 0 > Oct 27 16:37:24 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 > 5d 08 00 00 28 00 length 20480 SMID 396 command timeout cm > 0xfffffe0000e547c0 ccb 0xfffff800261ca800 > Oct 27 16:37:24 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 > Aborting command 0xfffffe0000e547c0 > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 > 5d 08 00 00 28 00 > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: Command timeout > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 > 5d 08 00 00 28 00 > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status > Error > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check > Condition > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command (per > sense data) > Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 14 fb 28 00 00 70 00 length 57344 SMID 292 command timeout cm > 0xfffffe0000e4bf40 ccb 0xfffff8000fd0a000 > Oct 27 16:37:25 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 > Aborting command 0xfffffe0000e4bf40 > Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 14 fa 48 00 00 e0 00 length 114688 SMID 276 command timeout cm > 0xfffffe0000e4aa40 ccb 0xfffff8007daa0000 > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 14 fa 48 00 00 e0 00 length 114688 SMID 276 terminated ioc 804b scsi 0 > state c xfer 113668 > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 14 fb 28 00 00 70 00 > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): CAM status: Command > timeout > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): Retrying command > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 > 14 fb 28 00 00 70 00 > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status > Error > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check > Condition > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT > ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): Retrying command (per > sense data) > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 > 70 6a 10 00 00 10 00 length 8192 SMID 464 command timeout cm > 0xfffffe0000e5a100 ccb 0xfffff8002620e000 > Oct 27 16:38:27 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 > Aborting command 0xfffffe0000e5a100 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 > 70 68 10 00 00 10 00 length 8192 SMID 459 command timeout cm > 0xfffffe0000e59a70 ccb 0xfffff8000fcfa800 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 10 > 10 00 length 8192 SMID 452 command timeout cm 0xfffffe0000e59140 ccb > 0xfffff8007dab0800 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 > 15 0d 88 00 00 70 00 length 57344 SMID 443 command timeout cm > 0xfffffe0000e58570 ccb 0xfffff8000cf25800 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 > 15 0d 40 00 00 28 00 length 20480 SMID 489 command timeout cm > 0xfffffe0000e5c1d0 ccb 0xfffff8007daa4800 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 > 15 0d 40 00 00 28 00 length 20480 SMID 489 terminated ioc 804b scsi 0 state > c xfer 19460 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 > 70 68 10 00 00 10 00 length 8192 SMID 459 terminated ioc 804b scsi 0 state > c xfer (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): CAM status: Command > timeout > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 10 > 10 00 length 8192 SMID 452 terminated ioc 804b scsi 0 state c xfer 0 > Oct 27 16:38:27 elibm kernel: (da6: (da6:mps0:0:17:0): READ(10). CDB: > 28 00 01 15 0d 88 00 00 70 00 length 57344 SMID 443 terminated ioc 804b > scsi 0 state c xfermps0:0: 0 > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 > 70 6a 10 00 00 10 00 > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): CAM status: SCSI Status > Error > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI status: Check > Condition > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI sense: UNIT > ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): Retrying command (per > sense data) > Oct 27 16:45:21 elibm kernel: mps0: Reinitializing controller, > Oct 27 16:45:22 elibm kernel: mps0: Warning: io_cmds_active is out of sync > - resynching to 0 > Oct 27 16:45:22 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:45:22 elibm kernel: mps0: IOCCapabilities: > 1285c > Oct 27 16:45:22 elibm kernel: mps0: mps_reinit finished sc > 0xfffffe0000d84000 post 4 free 3 > > ------------ > > > At 17:13, system rebooted with the freshly downgraded controller, this > time to P19. > > > ------------ > > Oct 27 17:13:16 elibm kernel: mps0: port 0x3f00-0x3fff mem > 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17 > Oct 27 17:13:16 elibm kernel: mps0: Firmware: 19.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 17:13:16 elibm kernel: mps0: IOCCapabilities: > 1285c > Oct 27 17:13:16 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 > Oct 27 17:13:16 elibm kernel: ses1 at mps0 bus 0 scbus0 target 22 lun 0 > Oct 27 17:13:16 elibm kernel: da1 at mps0 bus 0 scbus0 target 9 lun 0 > Oct 27 17:13:16 elibm kernel: da2 at mps0 bus 0 scbus0 target 10 lun 0 > Oct 27 17:13:16 elibm kernel: da0 at mps0 bus 0 scbus0 target 8 lun 0 > Oct 27 17:13:16 elibm kernel: da3 at mps0 bus 0 scbus0 target 11 lun 0 > Oct 27 17:13:16 elibm kernel: da4 at mps0 bus 0 scbus0 target 12 lun 0 > Oct 27 17:13:16 elibm kernel: da5 at mps0 bus 0 scbus0 target 13 lun 0 > Oct 27 17:13:16 elibm kernel: da6 at mps0 bus 0 scbus0 target 14 lun 0 > Oct 27 17:13:16 elibm kernel: da10 at mps0 bus 0 scbus0 target 19 lun 0 > Oct 27 17:13:16 elibm kernel: da7 at mps0 bus 0 scbus0 target 16 lun 0 > Oct 27 17:13:16 elibm kernel: da9 at mps0 bus 0 scbus0 target 18 lun 0 > Oct 27 17:13:16 elibm kernel: da8 at mps0 bus 0 scbus0 target 17 lun 0 > Oct 27 17:13:16 elibm kernel: da11 at mps0 bus 0 scbus0 target 20 lun 0 > Oct 27 17:13:16 elibm kernel: da12 at mps0 bus 0 scbus0 target 21 lun 0 > > > > > > sas2ircu output showing the SAS devices, which are mostly SATA disks. The > setup is > satisfactorily functional with the P19 firmware. > > > > > root@elibm:~ # sas2ircu 0 display > LSI Corporation SAS2 IR Configuration Utility. > Version 18.00.00.00 (2013.11.18) > Copyright (c) 2009-2013 LSI Corporation. All rights reserved. > > Read configuration has been initiated for controller 0 > ------------------------------------------------------------------------ > Controller information > ------------------------------------------------------------------------ > Controller type : SAS2008 > BIOS version : 7.37.00.00 > Firmware version : 19.00.00.00 > Channel description : 1 Serial Attached SCSI > Initiator ID : 0 > Maximum physical devices : 255 > Concurrent commands supported : 3432 > Slot : Unknown > Segment : 0 > Bus : 17 > Device : 0 > Function : 0 > RAID Support : No > ------------------------------------------------------------------------ > IR Volume information > ------------------------------------------------------------------------ > ------------------------------------------------------------------------ > Physical device information > ------------------------------------------------------------------------ > Initiator at ID #0 > > Device is a Hard disk > Enclosure # : 2 > Slot # : 16 > SAS Address : 5000c50-0-05b5-ce25 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02W5L > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 17 > SAS Address : 5005076-0-3e8e-81a2 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08549F > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 18 > SAS Address : 5005076-0-3e8e-81a3 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08548T > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 19 > SAS Address : 5005076-0-3e8e-81a4 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08568E > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 20 > SAS Address : 5005076-0-3e8e-81a5 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08547X > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 21 > SAS Address : 5005076-0-3e8e-81a6 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08518Y > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 22 > SAS Address : 5005076-0-3e8e-81a7 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08556K > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Enclosure services device > Enclosure # : 2 > Slot # : 255 > SAS Address : 5005076-0-3e8e-81b9 > State : Standby (SBY) > Manufacturer : IBM-ESXS > Model Number : SAS EXP BP > Firmware Revision : 61A6 > Serial No : 00000006 > GUID : N/A > Protocol : SAS > Device Type : Enclosure services device > > Device is a Hard disk > Enclosure # : 3 > Slot # : 0 > SAS Address : 5005076-0-3e8e-86e9 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08550R > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 1 > SAS Address : 5005076-0-3e8e-86ea > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08911Y > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 2 > SAS Address : 5005076-0-3e8e-86eb > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08811L > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 13 > SAS Address : 5000c50-0-05b5-e531 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02STR > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 14 > SAS Address : 5000c50-0-05b5-d489 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02TV1 > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 15 > SAS Address : 5000c50-0-05b5-f0ad > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD03F4C > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Enclosure services device > Enclosure # : 3 > Slot # : 255 > SAS Address : 5005076-0-3e8e-86f9 > State : Standby (SBY) > Manufacturer : IBM-ESXS > Model Number : SAS EXP BP > Firmware Revision : 61A6 > Serial No : 00000006 > GUID : N/A > Protocol : SAS > Device Type : Enclosure services device > ------------------------------------------------------------------------ > Enclosure information > ------------------------------------------------------------------------ > Enclosure# : 1 > Logical ID : 500605b0:07ba2100 > Numslots : 8 > StartSlot : 0 > Enclosure# : 2 > Logical ID : 50050760:3e8e81a0 > Numslots : 25 > StartSlot : 0 > Enclosure# : 3 > Logical ID : 50050760:3e8e86e0 > Numslots : 25 > StartSlot : 0 > ------------------------------------------------------------------------ > SAS2IRCU: Command DISPLAY Completed Successfully. > SAS2IRCU: Utility Completed Successfully. > root@elibm:~ # > >