Date: Sun, 22 Mar 2015 14:31:27 +0100 From: Miltiadis Margaronis <mmargaron@gmail.com> To: Miguel Clara <miguelmclara@gmail.com> Cc: freebsd-usb@freebsd.org Subject: Re: Support for RTL8153 (USB 3.0 Ethernet) Message-ID: <CAGbxAaxwS0s90T-DqJfo9_9oqu8VvOsYA9FxSJSt10ek2QFtKw@mail.gmail.com> In-Reply-To: <ff57f70a-c539-4eda-9d4c-5c405a68642e@gmail.com> References: <alpine.DEB.2.02.1503190852060.5719@therion.localdomain> <ff57f70a-c539-4eda-9d4c-5c405a68642e@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, On Thu, Mar 19, 2015 at 7:02 PM, Miguel Clara <miguelmclara@gmail.com> wrote: > On quinta-feira, 19 de Mar=C3=A7o de 2015 08:10:35 WET, Miltiadis Margaro= nis > wrote: > >> Hi, >> >> In my case it worked as a normal Ethernet CDC device using the second >> configuration. If you still happen to have this device around, you can t= ry >> >> usbconfig -d ugenX.Y set_config 1 >> >> After entering this, I got a normal ueX device which worked for the shor= t >> time I used it. >> >> Please cc me, I am not subscribed. >> >> HTH, >> > > This is cool, I have "dodocool" around which I wasn't use much more than > for a usb SWITCH, but I have an Acer Laptop with wireless only, and I > didn't know I could use ue driver for this (I never really tried but its > sure nice to know). > > Same thing here. I'm using it temporarily on a laptop to bypass problems with the onboard NIC. It has a wireless .11ac card, also unsupported. > The only issue I find is that it seems to topspeed a bit higher then > 100Mbps > > Client connecting to yoda, TCP port 5001 > TCP window size: 32.5 KByte (default) > ------------------------------------------------------------ > [ 3] local 1.1.1.1 port 24383 connected with 1.1.1.2 port 5001 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.0 sec 143 MBytes 120 Mbits/sec > > ------------------------------------------------------------ > Client connecting to yoda, TCP port 5001 > TCP window size: 1.00 MByte (WARNING: requested 1.00 MByte) > ------------------------------------------------------------ > [ 3] local 1.1.1.1 port 24424 connected with 1.1.1.2 port 5001 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.0 sec 135 MBytes 114 Mbits/sec > > > I'm assuming this is just because ue is not ready to handle more then > that, but it would be nice if it could go close to the 1Gbits. > > Not something I would consider priority though as this devices are > probably only used as a alternative to main cards, and its far better tha= n > what I got with USB Wireless cards do the the fact that there's no 11n > support on those,, so I'm happy with this. > > I'm getting similar figures but I'm also not very worried about performance at this stage. Functionality matters more. Many thanks for sharing the 'usbconfig -d ugenX.Y set_config 1' trick. > > You're welcome, glad it was useful. -- Miltos --=20 > ----------------------------------------------- > Miguel Clara > IT - Sys Admin & Developer >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGbxAaxwS0s90T-DqJfo9_9oqu8VvOsYA9FxSJSt10ek2QFtKw>