From owner-freebsd-wireless@freebsd.org Sun Oct 18 04:06:31 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 944C7A0F660 for ; Sun, 18 Oct 2015 04:06:31 +0000 (UTC) (envelope-from woodsb02@gmail.com) Received: from mailman.ysv.freebsd.org (mailman.ysv.freebsd.org [IPv6:2001:1900:2254:206a::50:5]) by mx1.freebsd.org (Postfix) with ESMTP id 743C99DD for ; Sun, 18 Oct 2015 04:06:31 +0000 (UTC) (envelope-from woodsb02@gmail.com) Received: by mailman.ysv.freebsd.org (Postfix) id 71AF4A0F655; Sun, 18 Oct 2015 04:06:31 +0000 (UTC) Delivered-To: wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 570F7A0F651; Sun, 18 Oct 2015 04:06:31 +0000 (UTC) (envelope-from woodsb02@gmail.com) Received: from mail-vk0-x22c.google.com (mail-vk0-x22c.google.com [IPv6:2607:f8b0:400c:c05::22c]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 148789D5; Sun, 18 Oct 2015 04:06:31 +0000 (UTC) (envelope-from woodsb02@gmail.com) Received: by vkaw128 with SMTP id w128so88197559vka.0; Sat, 17 Oct 2015 21:06:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=osod9ANNKz41RlOGoj9AOR2wl42OGwqHL1+jQqfq9dY=; b=NK6Yyr/PObApJAo4cmPf3J7U+ZnrD6CPrShFYzJMzj5x/n4cC56R/ap+eRn0ud5P9V Eh7TekzghBk+uE482e1JteDeDLNUqDT4BqiKDjA6mWfAOwL/4yPuqusAKTYb6UKP10f7 T9FU9x668kg9Is8tpdwEMsOYmyHDK7dGD5gLtRiROddpEGeEqy09Ux5IPR8bk/bac9e3 GfY31niDAixKBg91DoB/Ny4c15FpV2Cg8NrqPSHA4Ixyv73EdvQ20ueqKq1KF5+DwCSf afvoZEgCxP/DadMd9glbRl/exnFEJpulEHRc73ahafndW4O4Tr8wRuNgrNhDTJnbMP/a fU4Q== MIME-Version: 1.0 X-Received: by 10.31.50.205 with SMTP id y196mr15994790vky.150.1445141189827; Sat, 17 Oct 2015 21:06:29 -0700 (PDT) Received: by 10.31.77.130 with HTTP; Sat, 17 Oct 2015 21:06:29 -0700 (PDT) In-Reply-To: <1444798812.3234.58.camel@me.com> References: <1444798812.3234.58.camel@me.com> Date: Sun, 18 Oct 2015 12:06:29 +0800 Message-ID: Subject: Re: CFT: wpa_supplicant/hostapd 2.5 From: Ben Woods To: Rui Paulo Cc: current@freebsd.org, "freebsd-wireless@freebsd.org" Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Oct 2015 04:06:31 -0000 On 14 October 2015 at 13:00, Rui Paulo wrote: > Hi, > > Please download and test the wpa_supplicant/hostapd import patch: > > http://people.freebsd.org/~rpaulo/patches/wpa-2.5.diff > > > Changelog: > > http://w1.fi/cgit/hostap/plain/hostapd/ChangeLog > http://w1.fi/cgit/hostap/plain/wpa_supplicant/ChangeLog > > > Please report success/failures. > > Thanks, > -- > Rui Paulo > Hi Rui, I've build FreeBSD head with your patch and have been using it on my home wireless router for a couple of days now (running on a Netgate RCC-VE 8860 running FreeBSD head amd64 with AR9280 wifi chip). All working fine for me. Thanks for your work. Regards, Ben -- From: Benjamin Woods woodsb02@gmail.com From owner-freebsd-wireless@freebsd.org Sun Oct 18 19:53:36 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9C62CA18104 for ; Sun, 18 Oct 2015 19:53:36 +0000 (UTC) (envelope-from sbruno@freebsd.org) Received: from mailman.ysv.freebsd.org (mailman.ysv.freebsd.org [IPv6:2001:1900:2254:206a::50:5]) by mx1.freebsd.org (Postfix) with ESMTP id 867A5C0E for ; Sun, 18 Oct 2015 19:53:36 +0000 (UTC) (envelope-from sbruno@freebsd.org) Received: by mailman.ysv.freebsd.org (Postfix) id 8368EA18103; Sun, 18 Oct 2015 19:53:36 +0000 (UTC) Delivered-To: wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 8214EA18102 for ; Sun, 18 Oct 2015 19:53:36 +0000 (UTC) (envelope-from sbruno@freebsd.org) Received: from mail.ignoranthack.me (ignoranthack.me [199.102.79.106]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 6400CC0D for ; Sun, 18 Oct 2015 19:53:36 +0000 (UTC) (envelope-from sbruno@freebsd.org) Received: from [192.168.200.208] (unknown [50.136.155.142]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: sbruno@ignoranthack.me) by mail.ignoranthack.me (Postfix) with ESMTPSA id B594E1934F2; Sun, 18 Oct 2015 19:53:28 +0000 (UTC) Subject: Re: CFT: wpa_supplicant/hostapd 2.5 To: Rui Paulo , wireless@freebsd.org References: <1444798812.3234.58.camel@me.com> From: Sean Bruno Message-ID: <5623F8B7.1030704@freebsd.org> Date: Sun, 18 Oct 2015 12:53:27 -0700 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.3.0 MIME-Version: 1.0 In-Reply-To: <1444798812.3234.58.camel@me.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Oct 2015 19:53:36 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 On 10/13/15 22:00, Rui Paulo wrote: > Hi, > > Please download and test the wpa_supplicant/hostapd import patch: > > http://people.freebsd.org/~rpaulo/patches/wpa-2.5.diff > > > Changelog: > > http://w1.fi/cgit/hostap/plain/hostapd/ChangeLog > http://w1.fi/cgit/hostap/plain/wpa_supplicant/ChangeLog > > > Please report success/failures. > > Thanks, > Not the most useful information, but for MIPS this all seems to compile/work great. sean -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQF8BAEBCgBmBQJWI/izXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXRCQUFENDYzMkU3MTIxREU4RDIwOTk3REQx MjAxRUZDQTFFNzI3RTY0AAoJEBIB78oecn5kDb0IAKbLWtBRSrHQwaV2cW0BK3mE GSFUQXao38GEyIKHBb5Hioq9cKmlnMFz3vDrwuwLo8B+1QPYmsxW90byyOpUPXQc ybDp9aIdL1Naq3PiXOBbbPvx2ag7m5TSgnmNNzVvaWEsEbA8FAauS0C3ehSRJs2J 3GcrN36R09nRW2Cc8dHUzl2zUxF8H4EJ1W0zhP93czjwJCgZ5d3uICqggzDvgYkF oMq1yMihBQGTJ9vdiZ6vCA1522S9LF0e6sW9TYX7/7kw5fWxboaJc6ZwVxWI6uN8 XHqX+ZusWF3FO98870WZd6G7/5jbo6Kq7YPnqg72dtfgeRBgE3qjmfJUPt7ULoQ= =8bD6 -----END PGP SIGNATURE----- From owner-freebsd-wireless@freebsd.org Sun Oct 18 21:00:28 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 823D5A18136 for ; Sun, 18 Oct 2015 21:00:28 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7574E7CE for ; Sun, 18 Oct 2015 21:00:28 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9IL0Sv0081798 for ; Sun, 18 Oct 2015 21:00:28 GMT (envelope-from bugzilla-noreply@FreeBSD.org) Message-Id: <201510182100.t9IL0Sv0081798@kenobi.freebsd.org> From: bugzilla-noreply@FreeBSD.org To: freebsd-wireless@FreeBSD.org Subject: Problem reports for freebsd-wireless@FreeBSD.org that need special attention X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 Date: Sun, 18 Oct 2015 21:00:28 +0000 Content-Type: text/plain; charset="UTF-8" X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Oct 2015 21:00:28 -0000 To view an individual PR, use: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=(Bug Id). The following is a listing of current problems submitted by FreeBSD users, which need special attention. These represent problem reports covering all versions including experimental development code and obsolete releases. Status | Bug Id | Description ------------+-----------+--------------------------------------------------- Open | 154598 | [ath] Atheros 5424/2424 can't connect to WPA netw Open | 163312 | [panic] [ath] kernel panic: page fault with ath0 Open | 166190 | [ath] TX hangs and frames stuck in TX queue Open | 166357 | [ath] 802.11n TX stall when the first frame in th Open | 169362 | [ath] AR5416: radar pulse PHY errors sometimes in 5 problems total for which you should take action. From owner-freebsd-wireless@freebsd.org Mon Oct 19 08:44:29 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 5C197A12598 for ; Mon, 19 Oct 2015 08:44:29 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 2DE05226 for ; Mon, 19 Oct 2015 08:44:29 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9J8iT4R059482 for ; Mon, 19 Oct 2015 08:44:29 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Mon, 19 Oct 2015 08:44:28 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_status Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Oct 2015 08:44:29 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 Hans Petter Selasky changed: What |Removed |Added ---------------------------------------------------------------------------- Status|New |In Progress --- Comment #3 from Hans Petter Selasky --- Hi, Over the weekend I've imported Nathanial Sloss's A2DP code into my virtual OSS backend for FreeBSD. If someone wants to do recording support, would be great. How to connect: 0) Add your device to /etc/bluetooth/hcsecd.conf device { bdaddr xx:xx:xx:xx:xx:xx; name "BT audio device"; key nokey; pin "0000"; } 1) /etc/rc.d/hcsecd onestart 2) hccontrol -n ubt0hci write_authentication_enable 1 3) Now switch on pairing 4) hccontrol -n ubt0hci create_connection xx:xx:xx:xx:xx:xx 5) Install cuse4bsd-kmod from ports or set HAVE_CUSE=YES for 11-current. 6) kldload cuse4bsd or cuse 7) svn --username anonsvn --password anonsvn \ checkout svn://svn.turbocat.net/i4b/trunk/virtual_oss cd virtual_oss make HAVE_BLUETOOTH=YES all # Disable kernel's /dev/dsp sysctl hw.snd.basename_clone=0 # Create new /dev/dsp ./virtual_oss -C 2 -c 2 -r 48000 -b 16 -s 1024 -R /dev/null -P /dev/bluetooth/xx:xx:xx:xx:xx:xx -d dsp Assuming you have sox installed: play test.wav Or use VLC and select OSS audio backend. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Mon Oct 19 08:56:21 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 45F23A12B76 for ; Mon, 19 Oct 2015 08:56:21 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 32539DD4 for ; Mon, 19 Oct 2015 08:56:21 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9J8uLSo080210 for ; Mon, 19 Oct 2015 08:56:21 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Mon, 19 Oct 2015 08:56:20 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Oct 2015 08:56:21 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #4 from Hans Petter Selasky --- What's missing from recording support is simply the SBC audio decoder. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Mon Oct 19 18:15:30 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 5F0A5A19617 for ; Mon, 19 Oct 2015 18:15:30 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 43E311E65 for ; Mon, 19 Oct 2015 18:15:30 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9JIFU4g039511 for ; Mon, 19 Oct 2015 18:15:30 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203875] Kernel panic when destroying wlan0 iwn 6205 Date: Mon, 19 Oct 2015 18:15:30 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: new X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tim@orgizm.net X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_id short_desc product version rep_platform op_sys bug_status bug_severity priority component assigned_to reporter Message-ID: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Oct 2015 18:15:30 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203875 Bug ID: 203875 Summary: Kernel panic when destroying wlan0 iwn 6205 Product: Base System Version: 11.0-CURRENT Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: wireless Assignee: freebsd-wireless@FreeBSD.org Reporter: tim@orgizm.net Kernel panics when I do "ifconfig wlan0 destroy". running 11-CURRENT r289562 on a Thinkpad x220t. Panic happens both when wlan0 is part of lagg interface or when it is not. Also wpa_supplicant won't work unless I wait for 10sec after creating the interface. core.txt.1: http://tim.tek42.de/core.txt.1 And I get this lock order reversal message when creating a lagg interface: wlan0: Ethernet address: a0:88:b4:97:62:b8 Created wlan(4) interfaces: wlan0. Created clone interfaces: lagg0. iwn0: iwn_read_firmware: ucode rev=0x12a80601 lock order reversal: lagg0: link state changed to DOWN 1st 0xfffff80010f6fa08 if_lagg rmlock (if_lagg rmlock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1445 2nd 0xfffff80010f73190 if_addr_lock (if_addr_lock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1549 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe046272f5f0 witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe046272f670 _rw_wlock_cookie() at _rw_wlock_cookie+0x6e/frame 0xfffffe046272f6b0 lagg_ether_cmdmulti() at lagg_ether_cmdmulti+0x5c/frame 0xfffffe046272f6f0 lagg_ioctl() at lagg_ioctl+0x1175/frame 0xfffffe046272f7d0 ifioctl() at ifioctl+0x10c6/frame 0xfffffe046272f860 kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe046272f8c0 sys_ioctl() at sys_ioctl+0x17e/frame 0xfffffe046272f9a0 amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe046272fab0 Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe046272fab0 --- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011f316a, rsp = 0x7fffffffe3d8, rbp = 0x7fffffffe450 --- iwn0: iwn_read_firmware: ucode rev=0x12a80601 lock order reversal: 1st 0xfffff80010f6fa08 if_lagg rmlock (if_lagg rmlock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1498 2nd 0xfffffe0000f576c0 em0 (EM Core Lock) @ /usr/src/sys/dev/e1000/if_em.c:1223 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe046272f010 witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe046272f090 __mtx_lock_flags() at __mtx_lock_flags+0xa4/frame 0xfffffe046272f0e0 em_ioctl() at em_ioctl+0x94/frame 0xfffffe046272f120 lagg_port_ioctl() at lagg_port_ioctl+0xde/frame 0xfffffe046272f190 if_addmulti() at if_addmulti+0x253/frame 0xfffffe046272f210 lagg_ether_cmdmulti() at lagg_ether_cmdmulti+0x158/frame 0xfffffe046272f250 lagg_ioctl() at lagg_ioctl+0xed/frame 0xfffffe046272f330 if_addmulti() at if_addmulti+0x253/frame 0xfffffe046272f3b0 in6_mc_join_locked() at in6_mc_join_locked+0x1a6/frame 0xfffffe046272f440 in6_joingroup() at in6_joingroup+0x75/frame 0xfffffe046272f480 in6_update_ifa() at in6_update_ifa+0x1228/frame 0xfffffe046272f620 in6_ifattach() at in6_ifattach+0x45a/frame 0xfffffe046272f7d0 ifioctl() at ifioctl+0xf2b/frame 0xfffffe046272f860 kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe046272f8c0 sys_ioctl() at sys_ioctl+0x17e/frame 0xfffffe046272f9a0 amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe046272fab0 Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe046272fab0 --- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011f316a, rsp = 0x7fffffffe448, rbp = 0x7fffffffe4a0 --- Starting Network: lo0 em0 wlan0 lagg0. ----------- /boot/loader.conf: autoboot_delay="3" zfs_load="YES" i915kms_load="YES" usb_quirk_load="YES" kern.vty="vt" hint.p4tcc.0.disabled=1 hint.p4tcc.1.disabled=1 hint.acpi_throttle.0.disabled=1 hint.acpi_throttle.1.disabled=1 kern.hz=100 drm.i915.enable_rc6=7 hint.ahcich.0.pm_level=5 hint.ahcich.1.pm_level=5 #hint.ehci.0.wake=1 #hint.ehci.1.wake=1 vfs.zfs.arc_max="8192M" acpi_ibm_load="YES" cuse4bsd_load="YES" hint.psm.0.flags="0x3000" hw.psm.synaptics_support=1 ---------- root@xolotl:~ # uname -a FreeBSD xolotl.youpr0n.org 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r289562: Mon Oct 19 15:59:05 CEST 2015 root@xolotl.youpr0n.org:/usr/obj/usr/src/sys/GENERIC amd64 -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Mon Oct 19 19:12:56 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B063BA19574 for ; Mon, 19 Oct 2015 19:12:56 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9D7442E5 for ; Mon, 19 Oct 2015 19:12:56 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9JJCu1T068496 for ; Mon, 19 Oct 2015 19:12:56 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Mon, 19 Oct 2015 19:12:56 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: lme@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: cc Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Oct 2015 19:12:56 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 Lars Engels changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |lme@FreeBSD.org --- Comment #5 from Lars Engels --- I tried your instructions with a Teufel Bamster bluetooth speaker. It all went fine until I start virtual_oss: # ./virtual_oss -C 2 -c 2 -r 48000 -b 16 -s 1024 -R /dev/null -P /dev/bluetooth/a0:e9:db:00:32:0d -d dsp virtual_oss: AUTOCONFIG FAILED: No error: 0 virtual_oss: AUTOCONFIG FAILED: No error: 0 virtual_oss: AUTOCONFIG FAILED: No error: 0 virtual_oss: AUTOCONFIG FAILED: No error: 0 virtual_oss: AUTOCONFIG FAILED: No error: 0 The message is emitted every second and the speaker shortly beeps at the same time. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Mon Oct 19 20:38:50 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B2704A19B46 for ; Mon, 19 Oct 2015 20:38:50 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 96D2215E3 for ; Mon, 19 Oct 2015 20:38:50 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9JKco3O045480 for ; Mon, 19 Oct 2015 20:38:50 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Mon, 19 Oct 2015 20:38:50 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tony@git-pull.com X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 19 Oct 2015 20:38:50 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D203745 --- Comment #6 from Tony Narlock --- Fantastic news to brighten a tough day. Thank you Hans. Here is what I get. Is there anything I can do to give you better informat= ion? Same sennheiser Urbanite bluetooth headset. # freebsd-version; uname -a 11.0-CURRENT FreeBSD z600 11.0-CURRENT FreeBSD 11.0-CURRENT #5: Mon Oct 19 13:26:50 CDT = 2015 root@z600:/usr/obj/usr/src/sys/GENERIC amd64 =E2=9E=9C virtual_oss sudo hccontrol -n ubt0hci read_connection_list Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State 00:16:94:14:13:ae 12 ACL 0 MAST NONE 0 0 OPEN =E2=9E=9C virtual_oss ./virtual_oss -C 2 -c 2 -r 48000 -b 16 -s 1024 -R /= dev/null -P /dev/bluetooth/00:16:94:xx:xx:xx -d dsp virtual_oss: Could not connect to cuse module =E2=9E=9C virtual_oss sudo ./virtual_oss -C 2 -c 2 -r 48000 -b 16 -s 1024= -R /dev/null -P /dev/bluetooth/00:16:94:XX:XX:XX -d dsp=20 Password: virtual_oss: Could not connect to HC: Input/output error virtual_oss: Could not connect to HC: Input/output error virtual_oss: Could not connect to HC: Input/output error virtual_oss: Could not connect to HC: Input/output error virtual_oss: Could not connect to HC: Input/output error ^C%=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20 = =E2=9E=9C=20 virtual_oss sudo hccontrol -n ubt0hci read_connection_list=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State 00:16:94:xx:xx:xx 12 ACL 0 MAST NONE 0 0 OPEN =E2=9E=9C virtual_oss sudo ./virtual_oss -C 2 -c 2 -r 48000 -b 16 -s 1024= -R /dev/null -P /dev/bluetooth/00:16:94:XX:XX:XX -d dsp virtual_oss: Could not open SDP: Host is down virtual_oss: PSM not found: Host is down virtual_oss: Could not open SDP: Permission denied virtual_oss: PSM not found: Permission denied virtual_oss: Could not open SDP: Permission denied virtual_oss: PSM not found: Permission denied virtual_oss: Could not open SDP: Permission denied virtual_oss: PSM not found: Permission denied --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Tue Oct 20 08:00:48 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 67C5EA1AAED for ; Tue, 20 Oct 2015 08:00:48 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 5416911C7 for ; Tue, 20 Oct 2015 08:00:48 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9K80msD002059 for ; Tue, 20 Oct 2015 08:00:48 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 08:00:47 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 08:00:48 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #7 from Hans Petter Selasky --- (In reply to Lars Engels from comment #5) Hi, Possibly 48000 is not supported. Try 44100. Or add debug prints in the "avdtpAutoConfig" function. --HPS -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 08:02:41 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id E48DCA1ACF1 for ; Tue, 20 Oct 2015 08:02:41 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D0B611511 for ; Tue, 20 Oct 2015 08:02:41 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9K82fVa033760 for ; Tue, 20 Oct 2015 08:02:41 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 08:02:42 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 08:02:42 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #8 from Hans Petter Selasky --- (In reply to Tony Narlock from comment #6) Hi, This error code, simply means the speaker and BT dongle are not properly paired. Try experimenting with /etc/bluetooth/hcsecd.conf and ensure the hcsecd daemon is started. virtual_oss: Could not connect to HC: Input/output error --HPS -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 08:40:45 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 768F1A194BB for ; Tue, 20 Oct 2015 08:40:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 62F9F119D for ; Tue, 20 Oct 2015 08:40:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9K8ejH7091483 for ; Tue, 20 Oct 2015 08:40:45 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 08:40:45 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: lme@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 08:40:45 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #9 from Lars Engels --- BTW I used erdgeist's bluetooth-config script from https://reviews.freebsd.org/D3778 to pair with the speaker. Works pretty well! -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 10:19:24 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 6CF58A1852F for ; Tue, 20 Oct 2015 10:19:24 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 516DF850 for ; Tue, 20 Oct 2015 10:19:24 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KAJO1V060561 for ; Tue, 20 Oct 2015 10:19:24 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203887] Integer divide panic Date: Tue, 20 Oct 2015 10:19:24 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: new X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 10.1-RELEASE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Some People X-Bugzilla-Who: ml@netfence.it X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_id short_desc product version rep_platform op_sys bug_status bug_severity priority component assigned_to reporter Message-ID: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 10:19:24 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D203887 Bug ID: 203887 Summary: Integer divide panic Product: Base System Version: 10.1-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: wireless Assignee: freebsd-wireless@FreeBSD.org Reporter: ml@netfence.it Hello. My laptop just had a panic: I was not there at the time, so I just found ou= t it had rebooted. kgdb says: > Unread portion of the kernel message buffer: >=20 >=20 > Fatal trap 18: integer divide fault while in kernel mode > cpuid =3D 0; apic id =3D 00 > instruction pointer =3D 0x20:0xffffffff803788bd > stack pointer =3D 0x28:0xfffffe0110e988e0 > frame pointer =3D 0x28:0xfffffe0110e98930 > code segment =3D base 0x0, limit 0xfffff, type 0x1b > =3D DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags =3D interrupt enabled, resume, IOPL =3D 0 > current process =3D 11 (swi4: clock) > trap number =3D 18 > panic: integer divide fault > cpuid =3D 0 > KDB: stack backtrace: > #0 0xffffffff8056ef60 at kdb_backtrace+0x60 > #1 0xffffffff80537685 at panic+0x155 > #2 0xffffffff807cc2bf at trap_fatal+0x38f > #3 0xffffffff807cbf1c at trap+0x75c > #4 0xffffffff807b1df2 at calltrap+0x8 > #5 0xffffffff803824e8 at ar9300_ani_poll_freebsd+0x48 > #6 0xffffffff80330676 at ath_calibrate+0xf6 > #7 0xffffffff8054c747 at softclock_call_cc+0x177 > #8 0xffffffff8054cb84 at softclock+0x94 > #9 0xffffffff8050b7eb at intr_event_execute_handlers+0xab > #10 0xffffffff8050bc36 at ithread_loop+0x96 > #11 0xffffffff8050940a at fork_exit+0x9a > #12 0xffffffff807b232e at fork_trampoline+0xe > Uptime: 3h0m33s I guess the problem is in /usr/src/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_ani.c:1180: 1175 */ 1176 if (!DO_ANI(ah)) { 1177 return; 1178 } 1179=20=20=20=20 1180 ofdm_phy_err_rate =3D 1181 ani_state->ofdm_phy_err_count * 1000 / ani_state->listen_ti= me; 1182 cck_phy_err_rate =3D 1183 ani_state->cck_phy_err_count * 1000 / ani_state->listen_tim= e; Probably ani_state->listen_time is zero, but kgdb won't let me check. This is 10.1/amd64 with=20 ath0@pci0:3:0:0: class=3D0x028000 card=3D0xe052105b chip=3D0x0034168c re= v=3D0x01 hdr=3D0x00 vendor =3D 'Atheros Communications Inc.' device =3D 'AR9462 Wireless Network Adapter' class =3D network Hope this is the needed info to track this down; otherwise, I'm willing to provide. This crash is quite rare, since my laptop usually works fine. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Tue Oct 20 15:16:34 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 45F8AA1AB2F for ; Tue, 20 Oct 2015 15:16:34 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 31CBC6C1 for ; Tue, 20 Oct 2015 15:16:34 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KFGYDW069613 for ; Tue, 20 Oct 2015 15:16:34 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203105] [new driver] Port openbsd rtwn, new rtl8188ce driver Date: Tue, 20 Oct 2015 15:16:34 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: kevlo@FreeBSD.org X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 15:16:34 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203105 --- Comment #10 from Kevin Lo --- I finally got my rtl8188ce wifi adapter. I'm working on it, please stay tuned! -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 18:24:45 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 14A14A1A06A for ; Tue, 20 Oct 2015 18:24:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0138D1542 for ; Tue, 20 Oct 2015 18:24:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KIOiiu011459 for ; Tue, 20 Oct 2015 18:24:44 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203887] Integer divide panic Date: Tue, 20 Oct 2015 18:24:45 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 10.1-RELEASE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Some People X-Bugzilla-Who: adrian@freebsd.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_status cc Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 18:24:45 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203887 Adrian Chadd changed: What |Removed |Added ---------------------------------------------------------------------------- Status|New |In Progress CC| |adrian@freebsd.org --- Comment #1 from Adrian Chadd --- I'm guessing its: /* XXX beware of overflow? */ ani_state->listen_time += listen_time; in that function. Just add this underneath: if (ani_state->listen_time == 0) { /* restart ANI period if listen_time is invalid */ HALDEBUG(ah, HAL_DEBUG_ANI, "%s: listen_time=%d - calling ar9300_ani_restart\n", __func__, listen_time); ar9300_ani_restart(ah); return; } i bet that fixes it! -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 18:26:08 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id A2E06A1A0DE for ; Tue, 20 Oct 2015 18:26:08 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8F59A15AD for ; Tue, 20 Oct 2015 18:26:08 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KIQ8He012805 for ; Tue, 20 Oct 2015 18:26:08 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 18:26:08 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tony@git-pull.com X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 18:26:08 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #10 from Tony Narlock --- (In reply to Lars Engels from comment #9) Lars, that script was excellent. Is there a bugzilla tracker ticket for that? -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 19:22:10 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 96AC3A188B1 for ; Tue, 20 Oct 2015 19:22:10 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 833EC130A for ; Tue, 20 Oct 2015 19:22:10 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KJMAwH037950 for ; Tue, 20 Oct 2015 19:22:10 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 19:22:10 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tony@git-pull.com X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 19:22:10 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D203745 --- Comment #11 from Tony Narlock --- (In reply to Hans Petter Selasky from comment #7) Thank you. I'm getting the "AUTOCONFIG FAILED" error now. Trying with 44100 doesn't help. I am new to gdb, but tried giving that a go too. It seems that AutoConfig never gets passed avdtpGetCapabilities. avdtpCheckResponse ends up skipping `else if ((len % AVDTP_LEN_SUCCESS) 2, = len - 2)` and returning response_invalid. (gdb) info args recvfd =3D trans =3D signalId =3D 1 pkt_type =3D (int *) 0xac2060d861b6f7f9 data =3D (uint8_t *) 0x7fffffffe0e0 " =C3=A1=C3=BF=C3=BF\005" datasize =3D (size_t *) 0x7fffffffe0d8 (gdb) info locals buffer =3D 0x7fffffffe040 "2\001\024\b\004\b" len =3D 6 data: 140737488347312 datasize: 140737488347296 --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Tue Oct 20 19:31:54 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3E06EA18D5D for ; Tue, 20 Oct 2015 19:31:54 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 2AAC31BB8 for ; Tue, 20 Oct 2015 19:31:54 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KJVsaL052909 for ; Tue, 20 Oct 2015 19:31:54 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 19:31:54 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 19:31:54 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #12 from Hans Petter Selasky --- (In reply to Tony Narlock from comment #11) Could you try to just fake a "return (0);" instead of "return (EINVAL);" for now and see if you get further? -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 20:18:14 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 07C4AA0A1EE for ; Tue, 20 Oct 2015 20:18:14 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E84C7CA for ; Tue, 20 Oct 2015 20:18:13 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KKIDRh058382 for ; Tue, 20 Oct 2015 20:18:13 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 20:18:13 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: lme@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 20:18:14 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #13 from Lars Engels --- (In reply to Hans Petter Selasky from comment #12) At least for me s/EINVAL/0/ doesn't change anything. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Tue Oct 20 20:20:57 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 9A9BCA0A373 for ; Tue, 20 Oct 2015 20:20:57 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 87B5823B for ; Tue, 20 Oct 2015 20:20:57 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9KKKvRF061138 for ; Tue, 20 Oct 2015 20:20:57 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Tue, 20 Oct 2015 20:20:57 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: hselasky@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Oct 2015 20:20:57 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #14 from Hans Petter Selasky --- (In reply to Lars Engels from comment #13) Right. I'm not an SDP expert. What you could do is to dump that buffer in GDB like this: print /x buffer So that it shows in HEX instead of a string. Maybe someone here knows what's wrong. The SDP code was copied from the one provided by NetBSD. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Wed Oct 21 22:29:46 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 93307A1B0DB for ; Wed, 21 Oct 2015 22:29:46 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7670979E for ; Wed, 21 Oct 2015 22:29:46 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9LMTksF091010 for ; Wed, 21 Oct 2015 22:29:46 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Wed, 21 Oct 2015 22:29:46 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tony@git-pull.com X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 21 Oct 2015 22:29:46 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #15 from Tony Narlock --- (In reply to Hans Petter Selasky from comment #14) Like this? (lldb) frame v buffer -f hex (uint8_t [64]) buffer = { [0] = 0x40 [1] = 0x02 [2] = 0x14 [3] = 0x08 [4] = 0x04 [5] = 0x08 [6] = 0x00 [7] = 0x00 [8] = 0x2f [9] = 0x69 [10] = 0x6b [11] = 0x01 [12] = 0x08 [13] = 0x00 [14] = 0x00 [15] = 0x00 [16] = 0x1b [17] = 0x60 [18] = 0xdc [19] = 0x01 [20] = 0x08 [21] = 0x00 [22] = 0x00 [23] = 0x00 [24] = 0x07 [25] = 0x00 [26] = 0x00 [27] = 0x1e [28] = 0x00 [29] = 0x1b [30] = 0x00 [31] = 0x00 [32] = 0x48 [33] = 0xe1 [34] = 0xff [35] = 0xff [36] = 0xff [37] = 0x7f [38] = 0x00 [39] = 0x00 [40] = 0x07 [41] = 0x00 [42] = 0x00 [43] = 0x00 [44] = 0x00 [45] = 0x00 [46] = 0x00 [47] = 0x00 [48] = 0xa0 [49] = 0xe1 [50] = 0xff [51] = 0xff [52] = 0xff [53] = 0x7f [54] = 0x00 [55] = 0x00 [56] = 0xe9 [57] = 0x9a [58] = 0xe4 [59] = 0x00 [60] = 0x08 [61] = 0x00 [62] = 0x00 [63] = 0x00 } -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Wed Oct 21 22:30:53 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 1E50CA1B136 for ; Wed, 21 Oct 2015 22:30:53 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0BBF280C for ; Wed, 21 Oct 2015 22:30:53 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9LMUq5A093402 for ; Wed, 21 Oct 2015 22:30:52 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Wed, 21 Oct 2015 22:30:53 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tony@git-pull.com X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 21 Oct 2015 22:30:53 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #16 from Tony Narlock --- Are either of you two on IRC? Lars to confirm, you're getting the same issue still? AUTOCONFIG FAILED: No error: 0 -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Thu Oct 22 10:31:21 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 5BABBA1A5CC for ; Thu, 22 Oct 2015 10:31:21 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 48A501C07 for ; Thu, 22 Oct 2015 10:31:21 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9MAVLGT096121 for ; Thu, 22 Oct 2015 10:31:21 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203745] A2DP Support for Bluetooth Headphone Audio Date: Thu, 22 Oct 2015 10:31:20 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: lme@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 10:31:21 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203745 --- Comment #17 from Lars Engels --- (In reply to Tony Narlock from comment #16) Yes, no news unfortunately. -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Thu Oct 22 17:57:56 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id BB1F4A1C011; Thu, 22 Oct 2015 17:57:56 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from webmail2.jnielsen.net (webmail2.jnielsen.net [50.114.224.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "webmail2.jnielsen.net", Issuer "freebsdsolutions.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 960A11FDE; Thu, 22 Oct 2015 17:57:56 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from [10.10.1.196] (office.betterlinux.com [199.58.199.60]) (authenticated bits=0) by webmail2.jnielsen.net (8.15.1/8.15.1) with ESMTPSA id t9MHvrrx037489 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 22 Oct 2015 11:57:55 -0600 (MDT) (envelope-from lists@jnielsen.net) X-Authentication-Warning: webmail2.jnielsen.net: Host office.betterlinux.com [199.58.199.60] claimed to be [10.10.1.196] From: John Nielsen Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Subject: looking for suggestions for a small router/appliance board/SoC Date: Thu, 22 Oct 2015 11:57:52 -0600 Message-Id: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> Cc: freebsd-embedded@freebsd.org To: freebsd-wireless@freebsd.org Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 17:57:56 -0000 Hi- I=E2=80=99m working on a proof-of-concept for a kind of networking swiss = army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). - Small form factor (SoC, probably) - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. - Has at least 2 free USB ports after meeting previous requirements - Serial port or header (or GPIO pins that can be used as one? Not too = familiar with that) - Low power consumption (within reason taking the above into account) - Low cost (again, within reason) I may just start with a PC Engines apu1d, but if there are boards that = are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. I know that might be asking a lot, so I=E2=80=99m also open to any = suggestions that are most of the way there. Thanks! JN From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:00:03 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id ECCFCA1C081; Thu, 22 Oct 2015 18:00:03 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-ig0-x22a.google.com (mail-ig0-x22a.google.com [IPv6:2607:f8b0:4001:c05::22a]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id BA52710A0; Thu, 22 Oct 2015 18:00:03 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by igbhv6 with SMTP id hv6so65376698igb.0; Thu, 22 Oct 2015 11:00:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=ElCK0reYSjvCImZyq4lfrbFbU0vDjBJYerJae14Aqys=; b=JuLaegxTdjbcMn1DO1qzCReRpgnxD8umT3lxRnSbxjL8+HLeKBmphNG+PrgbxeXd/f +wD9GoJEVhpAq3l06mM92ryCpo4HuYVF8kAo7JGNlj8z4ECjoqXKIjflYOx5mCM1xFUf KU6t2Pw6OSn+FOTbmFoDCdJvFeQI+JmuDL18Vg40NL7F/2cCauIczP9Y+P3n/9xirO1l T303d9VumfhiVb7oHcjIDn5SMKSDtXYdjyW0BZkMbHxOZOrk9KjuD0RRyX57dTZYWA06 dQBjMO+3XKFhRedW0zcetm2J5JBBGpNqHMxqA0/40C3X3FrQbdx4AMa5MxqtjgikOal/ Y2sQ== MIME-Version: 1.0 X-Received: by 10.50.178.141 with SMTP id cy13mr17064366igc.61.1445536803079; Thu, 22 Oct 2015 11:00:03 -0700 (PDT) Received: by 10.36.46.66 with HTTP; Thu, 22 Oct 2015 11:00:03 -0700 (PDT) In-Reply-To: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> Date: Thu, 22 Oct 2015 11:00:03 -0700 Message-ID: Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Adrian Chadd To: John Nielsen Cc: "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:00:04 -0000 hi! The PC engines boards are your best bet to begin with. There's updated ARM hardware from Gateworks but I don't recall if we ever got a port fully working on it. -a On 22 October 2015 at 10:57, John Nielsen wrote: > Hi- > > I=E2=80=99m working on a proof-of-concept for a kind of networking swiss = army knife. Can anyone suggest a board that meets the following requirement= s? CPU arch doesn=E2=80=99t matter as long as it will run FreeBSD (Atom, AR= M, MIPS, etc). > > - Small form factor (SoC, probably) > - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any combinat= ion of chip-integrated and mini PCI-e slots. Prefer to avoid USB if possibl= e) > - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with switchin= g functionality > - Storage not super constrained. Built-in storage (if any) can be small= (which I=E2=80=99m arbitrarily defining as less than 128MB) if there is al= so an SD card slot or similar. USB storage will do in a pinch. > - Has at least 2 free USB ports after meeting previous requirements > - Serial port or header (or GPIO pins that can be used as one? Not too = familiar with that) > - Low power consumption (within reason taking the above into account) > - Low cost (again, within reason) > > I may just start with a PC Engines apu1d, but if there are boards that ar= e smaller, cheaper, have lower power requirements and/or have integrated wi= fi or switch capabilities I=E2=80=99d like to look in to them as well. > > I know that might be asking a lot, so I=E2=80=99m also open to any sugges= tions that are most of the way there. Thanks! > > JN > > _______________________________________________ > freebsd-embedded@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-embedded > To unsubscribe, send any mail to "freebsd-embedded-unsubscribe@freebsd.or= g" From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:11:17 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 8CA3DA1C2EA; Thu, 22 Oct 2015 18:11:17 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-io0-x22b.google.com (mail-io0-x22b.google.com [IPv6:2607:f8b0:4001:c06::22b]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 589F41611; Thu, 22 Oct 2015 18:11:17 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by ioll68 with SMTP id l68so100757752iol.3; Thu, 22 Oct 2015 11:11:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=M4d10epzK+eDSXsP241jSQx09AEciy7xZPvoEU8+2e4=; b=Yc2IURIdto3OXEjsyyEEqptfYVr+8RaJ+X8d5Yb6GNFe/FoFcIsBMf1J5Ny2g2JBEt LppFl3sYUKBLUL9iGXIi5Fr2O7xSJDCiNsf/5gziYxGmQ22arG5BgSDCsQRpo0ajujEN RMvptW0FZ/9AZ/A30sVZ9Te5FUPOkKtHsqfFlQilMfd+pDD6hZTThxieb58usiZ1XPka 1LrpExrZEzQVWZNJN8KA96p+TLXKlcXELSOojh6KTUovaKpGgwQSuI82YDV4xEwcsIky VuuODfvS6YGfDlXlOYdiO42/OI4oGSsG2PZd5lUZ7a+I+T6aZH7vIPULMdVV7wN3b9AP w4Lg== MIME-Version: 1.0 X-Received: by 10.107.152.2 with SMTP id a2mr7148440ioe.123.1445537476609; Thu, 22 Oct 2015 11:11:16 -0700 (PDT) Received: by 10.36.46.66 with HTTP; Thu, 22 Oct 2015 11:11:16 -0700 (PDT) In-Reply-To: <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> Date: Thu, 22 Oct 2015 11:11:16 -0700 Message-ID: Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Adrian Chadd To: Jeff Meegan Cc: John Nielsen , "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:11:17 -0000 i have avila/cambria stuff too, but it's old (PCI, no PCIe.) -a On 22 October 2015 at 11:06, Jeff Meegan wrote: > I have a couple of Gateworks Avila boards that at least boot. > > On Oct 22, 2015, at 11:00 AM, Adrian Chadd wrote= : > > hi! > > The PC engines boards are your best bet to begin with. There's updated > ARM hardware from Gateworks but I don't recall if we ever got a port > fully working on it. > > > -a > > > On 22 October 2015 at 10:57, John Nielsen wrote: > > Hi- > > I=E2=80=99m working on a proof-of-concept for a kind of networking swiss = army knife. > Can anyone suggest a board that meets the following requirements? CPU arc= h > doesn=E2=80=99t matter as long as it will run FreeBSD (Atom, ARM, MIPS, e= tc). > > - Small form factor (SoC, probably) > - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any combinati= on > of chip-integrated and mini PCI-e slots. Prefer to avoid USB if possible) > - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with switching > functionality > - Storage not super constrained. Built-in storage (if any) can be small > (which I=E2=80=99m arbitrarily defining as less than 128MB) if there is a= lso an SD > card slot or similar. USB storage will do in a pinch. > - Has at least 2 free USB ports after meeting previous requirements > - Serial port or header (or GPIO pins that can be used as one? Not too > familiar with that) > - Low power consumption (within reason taking the above into account) > - Low cost (again, within reason) > > I may just start with a PC Engines apu1d, but if there are boards that ar= e > smaller, cheaper, have lower power requirements and/or have integrated wi= fi > or switch capabilities I=E2=80=99d like to look in to them as well. > > I know that might be asking a lot, so I=E2=80=99m also open to any sugges= tions that > are most of the way there. Thanks! > > JN > > _______________________________________________ > freebsd-embedded@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-embedded > To unsubscribe, send any mail to "freebsd-embedded-unsubscribe@freebsd.or= g" > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g" > > From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:13:10 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 8727EA1C439 for ; Thu, 22 Oct 2015 18:13:10 +0000 (UTC) (envelope-from jeffm@frob.org) Received: from server283.com (server283.com [64.14.68.91]) by mx1.freebsd.org (Postfix) with ESMTP id 42D0F1A58 for ; Thu, 22 Oct 2015 18:13:09 +0000 (UTC) (envelope-from jeffm@frob.org) Received: (qmail 27267 invoked by uid 503); 22 Oct 2015 18:06:29 -0000 Received: from unknown (HELO ?192.168.100.131?) (jeffm@98.203.199.57) by server283.com with ESMTPA; 22 Oct 2015 18:06:29 -0000 Mime-Version: 1.0 (Mac OS X Mail 9.0 \(3094\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Jeff Meegan In-Reply-To: Date: Thu, 22 Oct 2015 11:06:27 -0700 Cc: John Nielsen , "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Message-Id: <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> To: Adrian Chadd X-Mailer: Apple Mail (2.3094) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:13:10 -0000 I have a couple of Gateworks Avila boards that at least boot. > On Oct 22, 2015, at 11:00 AM, Adrian Chadd = wrote: >=20 > hi! >=20 > The PC engines boards are your best bet to begin with. There's updated > ARM hardware from Gateworks but I don't recall if we ever got a port > fully working on it. >=20 >=20 > -a >=20 >=20 > On 22 October 2015 at 10:57, John Nielsen > wrote: >> Hi- >>=20 >> I=E2=80=99m working on a proof-of-concept for a kind of networking = swiss army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). >>=20 >> - Small form factor (SoC, probably) >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality >> - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. >> - Has at least 2 free USB ports after meeting previous requirements >> - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) >> - Low power consumption (within reason taking the above into = account) >> - Low cost (again, within reason) >>=20 >> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. >>=20 >> I know that might be asking a lot, so I=E2=80=99m also open to any = suggestions that are most of the way there. Thanks! >>=20 >> JN >>=20 >> _______________________________________________ >> freebsd-embedded@freebsd.org = mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-embedded = >> To unsubscribe, send any mail to = "freebsd-embedded-unsubscribe@freebsd.org = " > _______________________________________________ > freebsd-wireless@freebsd.org = mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless = > To unsubscribe, send any mail to = "freebsd-wireless-unsubscribe@freebsd.org = " From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:19:58 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 383CFA1C6E9 for ; Thu, 22 Oct 2015 18:19:58 +0000 (UTC) (envelope-from jim@netgate.com) Received: from mail-ob0-x22c.google.com (mail-ob0-x22c.google.com [IPv6:2607:f8b0:4003:c01::22c]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id ECBD91EC5 for ; Thu, 22 Oct 2015 18:19:57 +0000 (UTC) (envelope-from jim@netgate.com) Received: by obctp1 with SMTP id tp1so47939115obc.2 for ; Thu, 22 Oct 2015 11:19:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=netgate.com; s=google; h=content-type:mime-version:subject:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to; bh=wMMb1SQXRZxGULnwtkSzd5xaHHQRcnD68r3oCMGn6zc=; b=ezFN7kxEu/k2zrdali1Ykm0CthntSM5169D4ld9snH0hINht6nnJ1yagqNH9tYOui5 js8qoLHwky8RfzSUixfFPTW8/pl8l3EVopA+VsMHWBLo4A50AGskyXvRWff58WvN3XMA Ig8eloRafz2Idyvyz0w+DT7wftDO/Zec2wIH8= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:content-type:mime-version:subject:from :in-reply-to:date:cc:content-transfer-encoding:message-id:references :to; bh=wMMb1SQXRZxGULnwtkSzd5xaHHQRcnD68r3oCMGn6zc=; b=Jwyr3Foq9VYCCSFo9JRhFF7Ez9pK6FE7tQv6DvpbkrbXIva1hHKpyzzQ5RyqrYNGsR uvB68udUfHVnRM/eOwDKk6Bkgb8PzjxfG8TKa0ojsoq4Sw0t1Dvp1Uu4hYK/33MvcpGg TlMN1fJwOOKibiMhQzTWYxutQakVUa/Iu4wt5b1HuS8loRNNVfSpXo/B50nVlJpsmpMC pl//O4aDGMG8uMFru1K3++EAYp0gp6rwgzbrew7zCFWwsrSCJVDlGEvwOvSqho6sPGK+ HSnmBHObRqw744lsM1ny1eG2d3ISvxfvQNWxKxWHR4i2JPCmw2U0+WcSaePkb/3019of BstQ== X-Gm-Message-State: ALoCoQnubYUlFjDKezmNQ4uyTQCLuSRI9NaW1WDcrDRyoPsL+gFrvymDqvOqbQ0xzLBG6zh1E8pL X-Received: by 10.182.247.99 with SMTP id yd3mr11387142obc.37.1445537997325; Thu, 22 Oct 2015 11:19:57 -0700 (PDT) Received: from ?IPv6:2610:160:11:33:c192:fa36:e098:5284? ([2610:160:11:33:c192:fa36:e098:5284]) by smtp.gmail.com with ESMTPSA id o185sm6406312oif.5.2015.10.22.11.19.56 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 22 Oct 2015 11:19:56 -0700 (PDT) Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Jim Thompson In-Reply-To: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> Date: Thu, 22 Oct 2015 13:19:56 -0500 Cc: freebsd-wireless@freebsd.org, freebsd-embedded@freebsd.org Content-Transfer-Encoding: quoted-printable Message-Id: References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> To: John Nielsen X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:19:58 -0000 > On Oct 22, 2015, at 12:57 PM, John Nielsen wrote: >=20 > Hi- >=20 > I=E2=80=99m working on a proof-of-concept for a kind of networking = swiss army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). >=20 > - Small form factor (SoC, probably) > - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) I openly question your need or the desirability for 3 802.11 adapters. = It can be made to work, but you=E2=80=99re going to have some intermod. > - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality > - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. > - Has at least 2 free USB ports after meeting previous requirements > - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) > - Low power consumption (within reason taking the above into account) > - Low cost (again, within reason) >=20 > I may just start with a PC Engines apu1d, but if there are boards that = are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. you can probably get APU in low-volume, but quantity is very constrained = these days (it=E2=80=99s been true all year). We do have the RCC-VE and RCC-DFF units available. http://store.netgate.com/Desktop-Systems-C83.aspx Jim From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:21:30 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id C7F3AA1C854; Thu, 22 Oct 2015 18:21:30 +0000 (UTC) (envelope-from jmg@gold.funkthat.com) Received: from gold.funkthat.com (gate2.funkthat.com [208.87.223.18]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "gold.funkthat.com", Issuer "gold.funkthat.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 9DB8A1FCF; Thu, 22 Oct 2015 18:21:30 +0000 (UTC) (envelope-from jmg@gold.funkthat.com) Received: from gold.funkthat.com (localhost [127.0.0.1]) by gold.funkthat.com (8.14.5/8.14.5) with ESMTP id t9MILSFF058497 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 22 Oct 2015 11:21:28 -0700 (PDT) (envelope-from jmg@gold.funkthat.com) Received: (from jmg@localhost) by gold.funkthat.com (8.14.5/8.14.5/Submit) id t9MILSmi058496; Thu, 22 Oct 2015 11:21:28 -0700 (PDT) (envelope-from jmg) Date: Thu, 22 Oct 2015 11:21:28 -0700 From: John-Mark Gurney To: Jeff Meegan Cc: Adrian Chadd , "freebsd-wireless@freebsd.org" , John Nielsen , "freebsd-embedded@freebsd.org" Subject: Re: looking for suggestions for a small router/appliance board/SoC Message-ID: <20151022182128.GY65715@funkthat.com> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> X-Operating-System: FreeBSD 9.1-PRERELEASE amd64 X-PGP-Fingerprint: 54BA 873B 6515 3F10 9E88 9322 9CB1 8F74 6D3F A396 X-Files: The truth is out there X-URL: http://resnet.uoregon.edu/~gurney_j/ X-Resume: http://resnet.uoregon.edu/~gurney_j/resume.html X-TipJar: bitcoin:13Qmb6AeTgQecazTWph4XasEsP7nGRbAPE X-to-the-FBI-CIA-and-NSA: HI! HOW YA DOIN? can i haz chizburger? User-Agent: Mutt/1.5.21 (2010-09-15) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (gold.funkthat.com [127.0.0.1]); Thu, 22 Oct 2015 11:21:28 -0700 (PDT) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:21:31 -0000 Jeff Meegan wrote this message on Thu, Oct 22, 2015 at 11:06 -0700: > I have a couple of Gateworks Avila boards that at least boot. And only 100mbit ethernet, so failes the gige part of the requirements... > > On Oct 22, 2015, at 11:00 AM, Adrian Chadd wrote: > > > > The PC engines boards are your best bet to begin with. There's updated > > ARM hardware from Gateworks but I don't recall if we ever got a port > > fully working on it. > > > > On 22 October 2015 at 10:57, John Nielsen > wrote: > >> Hi- > >> > >> I???m working on a proof-of-concept for a kind of networking swiss army knife. Can anyone suggest a board that meets the following requirements? CPU arch doesn???t matter as long as it will run FreeBSD (Atom, ARM, MIPS, etc). > >> > >> - Small form factor (SoC, probably) > >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB if possible) > >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with switching functionality > >> - Storage not super constrained. Built-in storage (if any) can be small (which I???m arbitrarily defining as less than 128MB) if there is also an SD card slot or similar. USB storage will do in a pinch. > >> - Has at least 2 free USB ports after meeting previous requirements > >> - Serial port or header (or GPIO pins that can be used as one? Not too familiar with that) > >> - Low power consumption (within reason taking the above into account) > >> - Low cost (again, within reason) > >> > >> I may just start with a PC Engines apu1d, but if there are boards that are smaller, cheaper, have lower power requirements and/or have integrated wifi or switch capabilities I???d like to look in to them as well. > >> > >> I know that might be asking a lot, so I???m also open to any suggestions that are most of the way there. Thanks! -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." From owner-freebsd-wireless@freebsd.org Thu Oct 22 18:22:57 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 1E962A1C89E for ; Thu, 22 Oct 2015 18:22:57 +0000 (UTC) (envelope-from jeffm@frob.org) Received: from server283.com (server283.com [64.14.68.91]) by mx1.freebsd.org (Postfix) with ESMTP id BF31B1193 for ; Thu, 22 Oct 2015 18:22:56 +0000 (UTC) (envelope-from jeffm@frob.org) Received: (qmail 3792 invoked by uid 503); 22 Oct 2015 18:22:55 -0000 Received: from unknown (HELO ?192.168.100.131?) (jeffm@98.203.199.57) by server283.com with ESMTPA; 22 Oct 2015 18:22:55 -0000 Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 9.0 \(3094\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Jeff Meegan In-Reply-To: <20151022182128.GY65715@funkthat.com> Date: Thu, 22 Oct 2015 11:22:52 -0700 Cc: Adrian Chadd , "freebsd-wireless@freebsd.org" , John Nielsen , "freebsd-embedded@freebsd.org" Content-Transfer-Encoding: quoted-printable Message-Id: References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <2F3D00CB-C270-4A98-B9C1-554B43574CF1@frob.org> <20151022182128.GY65715@funkthat.com> To: John-Mark Gurney X-Mailer: Apple Mail (2.3094) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 18:22:57 -0000 Right. Adrian said that he was not sure if Gateworks were supported, so I was just adding my experience. > On Oct 22, 2015, at 11:21 AM, John-Mark Gurney = wrote: >=20 > Jeff Meegan wrote this message on Thu, Oct 22, 2015 at 11:06 -0700: >> I have a couple of Gateworks Avila boards that at least boot. >=20 > And only 100mbit ethernet, so failes the gige part of the = requirements... >=20 >>> On Oct 22, 2015, at 11:00 AM, Adrian Chadd = wrote: >>>=20 >>> The PC engines boards are your best bet to begin with. There's = updated >>> ARM hardware from Gateworks but I don't recall if we ever got a port >>> fully working on it. >>>=20 >>> On 22 October 2015 at 10:57, John Nielsen > wrote: >>>> Hi- >>>>=20 >>>> I???m working on a proof-of-concept for a kind of networking swiss = army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn???t matter as long as it will run FreeBSD = (Atom, ARM, MIPS, etc). >>>>=20 >>>> - Small form factor (SoC, probably) >>>> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) >>>> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality >>>> - Storage not super constrained. Built-in storage (if any) can be = small (which I???m arbitrarily defining as less than 128MB) if there is = also an SD card slot or similar. USB storage will do in a pinch. >>>> - Has at least 2 free USB ports after meeting previous requirements >>>> - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) >>>> - Low power consumption (within reason taking the above into = account) >>>> - Low cost (again, within reason) >>>>=20 >>>> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I???d like to look in to them as = well. >>>>=20 >>>> I know that might be asking a lot, so I???m also open to any = suggestions that are most of the way there. Thanks! >=20 > --=20 > John-Mark Gurney Voice: +1 415 225 5579 >=20 > "All that I will do, has been done, All that I have, has not." From owner-freebsd-wireless@freebsd.org Thu Oct 22 19:39:23 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 35F05A1C6A4; Thu, 22 Oct 2015 19:39:23 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from webmail2.jnielsen.net (webmail2.jnielsen.net [50.114.224.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "webmail2.jnielsen.net", Issuer "freebsdsolutions.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id F20D91355; Thu, 22 Oct 2015 19:39:22 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from [10.10.1.196] (office.betterlinux.com [199.58.199.60]) (authenticated bits=0) by webmail2.jnielsen.net (8.15.1/8.15.1) with ESMTPSA id t9MJdIx6050606 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 22 Oct 2015 13:39:21 -0600 (MDT) (envelope-from lists@jnielsen.net) X-Authentication-Warning: webmail2.jnielsen.net: Host office.betterlinux.com [199.58.199.60] claimed to be [10.10.1.196] Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: John Nielsen In-Reply-To: Date: Thu, 22 Oct 2015 13:39:18 -0600 Cc: freebsd-wireless@freebsd.org, freebsd-embedded@freebsd.org Content-Transfer-Encoding: quoted-printable Message-Id: <7D3FEA1A-0EAF-4B0A-867D-49DCEF34D0CC@jnielsen.net> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> To: Jim Thompson X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 19:39:23 -0000 On Oct 22, 2015, at 12:19 PM, Jim Thompson wrote: >> On Oct 22, 2015, at 12:57 PM, John Nielsen = wrote: >>=20 >> Hi- >>=20 >> I=E2=80=99m working on a proof-of-concept for a kind of networking = swiss army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). >>=20 >> - Small form factor (SoC, probably) >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) >=20 > I openly question your need or the desirability for 3 802.11 adapters. = It can be made to work, but you=E2=80=99re going to have some intermod. I don=E2=80=99t mind being questioned. :) I haven=E2=80=99t yet had to = worry much about intermod; can you educate me? One or two of the radios = would be in the 5GHz band at any given time. One scenario (out of = several) where I envisioned having 3 radios is taking a wireless uplink = (STA in either 2.4 or 5 GHz band) and repeating it (HOSTAP) on both 2.4 = and 5 GHz. Totally crazy? >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality >> - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. >> - Has at least 2 free USB ports after meeting previous requirements >> - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) >> - Low power consumption (within reason taking the above into account) >> - Low cost (again, within reason) >>=20 >> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. >=20 > you can probably get APU in low-volume, but quantity is very = constrained these days (it=E2=80=99s been true all year). Good to know. > We do have the RCC-VE and RCC-DFF units available. >=20 > http://store.netgate.com/Desktop-Systems-C83.aspx Thanks for the link! From owner-freebsd-wireless@freebsd.org Thu Oct 22 19:48:21 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 77B27A1C8B9; Thu, 22 Oct 2015 19:48:21 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from webmail2.jnielsen.net (webmail2.jnielsen.net [50.114.224.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "webmail2.jnielsen.net", Issuer "freebsdsolutions.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 3A4F9198D; Thu, 22 Oct 2015 19:48:20 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from [10.10.1.196] (office.betterlinux.com [199.58.199.60]) (authenticated bits=0) by webmail2.jnielsen.net (8.15.1/8.15.1) with ESMTPSA id t9MJmIRN061773 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 22 Oct 2015 13:48:20 -0600 (MDT) (envelope-from lists@jnielsen.net) X-Authentication-Warning: webmail2.jnielsen.net: Host office.betterlinux.com [199.58.199.60] claimed to be [10.10.1.196] Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: John Nielsen In-Reply-To: Date: Thu, 22 Oct 2015 13:48:17 -0600 Cc: "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Content-Transfer-Encoding: quoted-printable Message-Id: <8B2138DA-A660-413F-B25A-D99398D587C3@jnielsen.net> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> To: Adrian Chadd X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 19:48:21 -0000 On Oct 22, 2015, at 12:00 PM, Adrian Chadd = wrote: > On 22 October 2015 at 10:57, John Nielsen wrote: >> I=E2=80=99m working on a proof-of-concept for a kind of networking = swiss army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). >>=20 >> - Small form factor (SoC, probably) >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality >> - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. >> - Has at least 2 free USB ports after meeting previous requirements >> - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) >> - Low power consumption (within reason taking the above into = account) >> - Low cost (again, within reason) >>=20 >> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. >>=20 >> I know that might be asking a lot, so I=E2=80=99m also open to any = suggestions that are most of the way there. Thanks! > The PC engines boards are your best bet to begin with. There's updated > ARM hardware from Gateworks but I don't recall if we ever got a port > fully working on it. Thanks for the pointer. Good to know the Avila boards boot. A Ventana = board plus one or more expansion modules actually looks very versatile = and capable of meeting all my requirements (except maybe cost :). The = Laguna boards also look interesting, though probably not quite versatile = enough for this particular project. Can anyone jog Adrian=E2=80=99s = memory on the status of FreeBSD on either of those Gateworks board = families? JN From owner-freebsd-wireless@freebsd.org Thu Oct 22 19:57:41 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 718B6A1CAF4; Thu, 22 Oct 2015 19:57:41 +0000 (UTC) (envelope-from jmg@gold.funkthat.com) Received: from gold.funkthat.com (gate2.funkthat.com [208.87.223.18]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "gold.funkthat.com", Issuer "gold.funkthat.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 495121D50; Thu, 22 Oct 2015 19:57:41 +0000 (UTC) (envelope-from jmg@gold.funkthat.com) Received: from gold.funkthat.com (localhost [127.0.0.1]) by gold.funkthat.com (8.14.5/8.14.5) with ESMTP id t9MJve29059603 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 22 Oct 2015 12:57:40 -0700 (PDT) (envelope-from jmg@gold.funkthat.com) Received: (from jmg@localhost) by gold.funkthat.com (8.14.5/8.14.5/Submit) id t9MJveFG059602; Thu, 22 Oct 2015 12:57:40 -0700 (PDT) (envelope-from jmg) Date: Thu, 22 Oct 2015 12:57:40 -0700 From: John-Mark Gurney To: John Nielsen Cc: Adrian Chadd , "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Subject: Re: looking for suggestions for a small router/appliance board/SoC Message-ID: <20151022195740.GA65715@funkthat.com> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <8B2138DA-A660-413F-B25A-D99398D587C3@jnielsen.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <8B2138DA-A660-413F-B25A-D99398D587C3@jnielsen.net> X-Operating-System: FreeBSD 9.1-PRERELEASE amd64 X-PGP-Fingerprint: 54BA 873B 6515 3F10 9E88 9322 9CB1 8F74 6D3F A396 X-Files: The truth is out there X-URL: http://resnet.uoregon.edu/~gurney_j/ X-Resume: http://resnet.uoregon.edu/~gurney_j/resume.html X-TipJar: bitcoin:13Qmb6AeTgQecazTWph4XasEsP7nGRbAPE X-to-the-FBI-CIA-and-NSA: HI! HOW YA DOIN? can i haz chizburger? User-Agent: Mutt/1.5.21 (2010-09-15) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.7 (gold.funkthat.com [127.0.0.1]); Thu, 22 Oct 2015 12:57:40 -0700 (PDT) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 19:57:41 -0000 John Nielsen wrote this message on Thu, Oct 22, 2015 at 13:48 -0600: > On Oct 22, 2015, at 12:00 PM, Adrian Chadd wrote: > > > On 22 October 2015 at 10:57, John Nielsen wrote: > >> I???m working on a proof-of-concept for a kind of networking swiss army knife. Can anyone suggest a board that meets the following requirements? CPU arch doesn???t matter as long as it will run FreeBSD (Atom, ARM, MIPS, etc). > >> > >> - Small form factor (SoC, probably) > >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB if possible) > >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with switching functionality > >> - Storage not super constrained. Built-in storage (if any) can be small (which I???m arbitrarily defining as less than 128MB) if there is also an SD card slot or similar. USB storage will do in a pinch. > >> - Has at least 2 free USB ports after meeting previous requirements > >> - Serial port or header (or GPIO pins that can be used as one? Not too familiar with that) > >> - Low power consumption (within reason taking the above into account) > >> - Low cost (again, within reason) > >> > >> I may just start with a PC Engines apu1d, but if there are boards that are smaller, cheaper, have lower power requirements and/or have integrated wifi or switch capabilities I???d like to look in to them as well. > >> > >> I know that might be asking a lot, so I???m also open to any suggestions that are most of the way there. Thanks! > > > The PC engines boards are your best bet to begin with. There's updated > > ARM hardware from Gateworks but I don't recall if we ever got a port > > fully working on it. > > Thanks for the pointer. Good to know the Avila boards boot. A Ventana board plus one or more expansion modules actually looks very versatile and capable of meeting all my requirements (except maybe cost :). The Laguna boards also look interesting, though probably not quite versatile enough for this particular project. Can anyone jog Adrian???s memory on the status of FreeBSD on either of those Gateworks board families? I know that the AVILA boards work fine: FreeBSD avila.funkthat.com 11.0-CURRENT FreeBSD 11.0-CURRENT #3 r283010M: Sun May 17 10:16:08 PDT 2015 jmg@carbon.funkthat.com:/a/obj/arm.armeb/a/home/jmg/FreeBSD.svn/HEAD/sys/AVILA arm I can't find info on the Laguna boards... There is a wiki page on that status of the Ventana board: https://wiki.freebsd.org/FreeBSD/arm/Ventana But, the PCI slots and second gige aren't supported according to that page... So, if you're willing to spend as much money on a Ventana board, I'd recommend going w/ the Netgate RCC-VE 4860... It has much faster CPU, tons more memory and get better support by being an amd64 based platform... -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." From owner-freebsd-wireless@freebsd.org Thu Oct 22 19:59:47 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3556AA1CBA6; Thu, 22 Oct 2015 19:59:47 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-io0-x236.google.com (mail-io0-x236.google.com [IPv6:2607:f8b0:4001:c06::236]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 0021A1E8C; Thu, 22 Oct 2015 19:59:46 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by iofz202 with SMTP id z202so103182720iof.2; Thu, 22 Oct 2015 12:59:46 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=Un4VM0s78n5cpsV9zKNHV+DXWnldikF+vxhsmDAln+0=; b=HNkziM7o1t/QGfVukuJjN9QQ8gNDXiJnBWN7Y3gHFeNY3vsQOFl/wmSXExbvTARGW6 YH07RxxmZLB0eESvHIDttosPEwMm8q+WrdJbRpuRkPDKfCSgFZEvJlanQuOJ7tSW/O1W YLof2pvJq7R5SByPvc60aZlEN8u8DWynQxYKk8K8kDDWanJiVfLUYcv0MGDqacEhILqy +ICQOYZeczGKuRDh5rFet89TmcoOB+XpIt1JC7tFeIWpCOPLp95hswbOnJjBmJvOLYOd cwW9JNBOymvQGTpyyaB6cz5m1zOKyCEE5Rf5W9/1SWQifXjOAm9TPBcPCboQtP/vWZ1m sN/Q== MIME-Version: 1.0 X-Received: by 10.107.3.72 with SMTP id 69mr17432842iod.75.1445543986336; Thu, 22 Oct 2015 12:59:46 -0700 (PDT) Received: by 10.36.46.66 with HTTP; Thu, 22 Oct 2015 12:59:46 -0700 (PDT) In-Reply-To: <20151022195740.GA65715@funkthat.com> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <8B2138DA-A660-413F-B25A-D99398D587C3@jnielsen.net> <20151022195740.GA65715@funkthat.com> Date: Thu, 22 Oct 2015 12:59:46 -0700 Message-ID: Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Adrian Chadd To: John-Mark Gurney Cc: John Nielsen , "freebsd-wireless@freebsd.org" , "freebsd-embedded@freebsd.org" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 19:59:47 -0000 If someone's interested in finishing off the vertana work then let's have a chat with Rui and see if he's interested in a short term contract or something. -a On 22 October 2015 at 12:57, John-Mark Gurney wrote: > John Nielsen wrote this message on Thu, Oct 22, 2015 at 13:48 -0600: >> On Oct 22, 2015, at 12:00 PM, Adrian Chadd wrot= e: >> >> > On 22 October 2015 at 10:57, John Nielsen wrote: >> >> I???m working on a proof-of-concept for a kind of networking swiss ar= my knife. Can anyone suggest a board that meets the following requirements?= CPU arch doesn???t matter as long as it will run FreeBSD (Atom, ARM, MIPS,= etc). >> >> >> >> - Small form factor (SoC, probably) >> >> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any combi= nation of chip-integrated and mini PCI-e slots. Prefer to avoid USB if poss= ible) >> >> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with switc= hing functionality >> >> - Storage not super constrained. Built-in storage (if any) can be sm= all (which I???m arbitrarily defining as less than 128MB) if there is also = an SD card slot or similar. USB storage will do in a pinch. >> >> - Has at least 2 free USB ports after meeting previous requirements >> >> - Serial port or header (or GPIO pins that can be used as one? Not t= oo familiar with that) >> >> - Low power consumption (within reason taking the above into account= ) >> >> - Low cost (again, within reason) >> >> >> >> I may just start with a PC Engines apu1d, but if there are boards tha= t are smaller, cheaper, have lower power requirements and/or have integrate= d wifi or switch capabilities I???d like to look in to them as well. >> >> >> >> I know that might be asking a lot, so I???m also open to any suggesti= ons that are most of the way there. Thanks! >> >> > The PC engines boards are your best bet to begin with. There's updated >> > ARM hardware from Gateworks but I don't recall if we ever got a port >> > fully working on it. >> >> Thanks for the pointer. Good to know the Avila boards boot. A Ventana bo= ard plus one or more expansion modules actually looks very versatile and ca= pable of meeting all my requirements (except maybe cost :). The Laguna boar= ds also look interesting, though probably not quite versatile enough for th= is particular project. Can anyone jog Adrian???s memory on the status of Fr= eeBSD on either of those Gateworks board families? > > I know that the AVILA boards work fine: > FreeBSD avila.funkthat.com 11.0-CURRENT FreeBSD 11.0-CURRENT #3 r283010M:= Sun May 17 10:16:08 PDT 2015 jmg@carbon.funkthat.com:/a/obj/arm.armeb/= a/home/jmg/FreeBSD.svn/HEAD/sys/AVILA arm > > I can't find info on the Laguna boards... > > There is a wiki page on that status of the Ventana board: > https://wiki.freebsd.org/FreeBSD/arm/Ventana > > But, the PCI slots and second gige aren't supported according to that > page... > > So, if you're willing to spend as much money on a Ventana board, > I'd recommend going w/ the Netgate RCC-VE 4860... It has much faster > CPU, tons more memory and get better support by being an amd64 based > platform... > > -- > John-Mark Gurney Voice: +1 415 225 5579 > > "All that I will do, has been done, All that I have, has not." From owner-freebsd-wireless@freebsd.org Thu Oct 22 20:15:08 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 60B73A1CE97 for ; Thu, 22 Oct 2015 20:15:08 +0000 (UTC) (envelope-from jim@netgate.com) Received: from mail-oi0-x230.google.com (mail-oi0-x230.google.com [IPv6:2607:f8b0:4003:c06::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 1917215B1 for ; Thu, 22 Oct 2015 20:15:08 +0000 (UTC) (envelope-from jim@netgate.com) Received: by oiad129 with SMTP id d129so54435224oia.0 for ; Thu, 22 Oct 2015 13:15:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=netgate.com; s=google; h=content-type:mime-version:subject:from:in-reply-to:date:cc :content-transfer-encoding:message-id:references:to; bh=H3n7BGuMTpUONP4HJJUg9/rvJRYXOnDsw/oE6asve0c=; b=ct+zTYnh4Cj8q4bNeFe69pSQFMmiFqtzjA+k68dOCkP6CuhpO90Ps0ICV251QLrkK5 gVOOvm7DlLGNsNCasy0KTISr2+XZkUf1XAJOBIFiXpvMyS7m+t4aME4S2jSeTSHBlUiV qN0HclDu0mQ39EE1wSxmeCPHCyzzsZgT1d+mU= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:content-type:mime-version:subject:from :in-reply-to:date:cc:content-transfer-encoding:message-id:references :to; bh=H3n7BGuMTpUONP4HJJUg9/rvJRYXOnDsw/oE6asve0c=; b=Z7MrlCGAmpVaedSV4x8ION3yakS9bzDOjsaKZO4s4orm/HKZMvpAE0N10f49QZ4VGi YSKh3gwL7dn98Fu8ZR43gkUFbboCVOk391Qs1YIPz8L2VFumYlNA1hDefD/hUPyypWAN Jztiv5rTi83DjEcb99HV6zrOSMcnxAL+49MvbRbZNdLExTQzvTDi1fNTm66UGsweSgsi G6Y26b76MWwZ6KilZo0chr01MO5eDrgPoz6JE/zXFJzZ5pdVXeBGzFRmIyQ2882bg7EE zLTcQyWAuZIly8oROj80/ojkQC7QSR//qaj+FcMBtVeCv4CKUUsxplNmVy8TadBNzmrP 6iNQ== X-Gm-Message-State: ALoCoQnkEK8ZvIB4X0oTL37Fnr1r8QIUlV75aU8aMFk69xkY8ooyyfY1kL7alfX5NHoXn3fDv/3g X-Received: by 10.202.87.3 with SMTP id l3mr11849879oib.3.1445544907266; Thu, 22 Oct 2015 13:15:07 -0700 (PDT) Received: from ?IPv6:2610:160:11:33:c192:fa36:e098:5284? ([2610:160:11:33:c192:fa36:e098:5284]) by smtp.gmail.com with ESMTPSA id cu1sm6511437oeb.1.2015.10.22.13.15.05 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 22 Oct 2015 13:15:05 -0700 (PDT) Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: Jim Thompson In-Reply-To: <7D3FEA1A-0EAF-4B0A-867D-49DCEF34D0CC@jnielsen.net> Date: Thu, 22 Oct 2015 15:15:04 -0500 Cc: freebsd-wireless@freebsd.org, freebsd-embedded@freebsd.org Content-Transfer-Encoding: quoted-printable Message-Id: References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <7D3FEA1A-0EAF-4B0A-867D-49DCEF34D0CC@jnielsen.net> To: John Nielsen X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 22 Oct 2015 20:15:08 -0000 > On Oct 22, 2015, at 2:39 PM, John Nielsen wrote: >=20 > On Oct 22, 2015, at 12:19 PM, Jim Thompson wrote: >=20 >>> On Oct 22, 2015, at 12:57 PM, John Nielsen = wrote: >>>=20 >>> Hi- >>>=20 >>> I=E2=80=99m working on a proof-of-concept for a kind of networking = swiss army knife. Can anyone suggest a board that meets the following = requirements? CPU arch doesn=E2=80=99t matter as long as it will run = FreeBSD (Atom, ARM, MIPS, etc). >>>=20 >>> - Small form factor (SoC, probably) >>> - Can support at least 2 802.11a/b/g/n adapters, prefer 3 (any = combination of chip-integrated and mini PCI-e slots. Prefer to avoid USB = if possible) >>=20 >> I openly question your need or the desirability for 3 802.11 = adapters. It can be made to work, but you=E2=80=99re going to have some = intermod. >=20 > I don=E2=80=99t mind being questioned. :) I haven=E2=80=99t yet had to = worry much about intermod; can you educate me? One or two of the radios = would be in the 5GHz band at any given time. One scenario (out of = several) where I envisioned having 3 radios is taking a wireless uplink = (STA in either 2.4 or 5 GHz band) and repeating it (HOSTAP) on both 2.4 = and 5 GHz. Totally crazy? Many people believe that there are =E2=80=9Cthree non-overlapping=E2=80=9D= channels for use with 802.11b/802.11g/802.11n in 2.4GHz. While the transmit masks don=E2=80=99t overlap, the selectivity of the = receiver (especially after the industry turned to direct conversion = architectures around the advent of 802.11g) is not sufficient to operate even two radios in = any given bad (2.4GHz, etc.) It=E2=80=99s all been covered before. You=E2=80=99ve unknowingly hit = =E2=80=9CJim=E2=80=99s favorite point of banter=E2=80=9D. = https://lists.freebsd.org/pipermail/freebsd-wireless/2013-December/004158.= html http://seclists.org/interesting-people/2009/Oct/77 http://www.ietf.org/mail-archive/web/manet/current/msg05757.html http://lists.shmoo.com/pipermail/hostap/2004-April/006524.html Even where you can operate in separate bands, there are mixing products = that can greatly interfere with correct reception. Receivers live under constant bombardment of signals which enter through = the antenna port. Some of these signals are immediately attenuated due = to front-end filtering, (aka pre-selection). When the remaining signals = reach a non-linear element, such as a detector, mixer or amplifier, = harmonics of the signals are generated. Most of the harmonics are well = outside the pass band of RF and IF filters and cause no problems. However there are some frequencies where the mixing products =E2=80=93 = intermodulation products =E2=80=93 of the various signals fall on or = near the desired receive frequency range. The intermodulation products = that tend to cause the most problems are the so-called odd-order = products. This is true because odd-order products of signals near your = desired receive frequency also are near your receive frequency. 802.11 = systems tend to suffer more from these issues due to the uniform spacing = of the channels. (Remember that OFDM separates the signal out into many = sub-channels.) With DC receivers, the intermediate frequency is zero and the image to = the desired channel (for all but single-sideband signals) is the channel = itself. This means=20 only one local oscillator (LO) is required, which means only one phase = noise contribution, and as such, the need for the bulky off-chip filters = is consequently removed. Filtering now only occurs at low frequencies = (baseband) with some amplification, which means less current consumption = than at higher frequencies (to drive device parasitics), fewer = components and lower cost. This is all good, and contributes the much = lower cost for today=E2=80=99s 802.11 radios, though the largest = contributor here is the absence of SAW filters at the IF in a superhet = receiver. Practically, however, strong out-of-band interference or blocking = signals may need to be removed prior to down-conversion in order to = avoid desensitizing the receiver by saturating subsequent stages, as = well as producing harmonics and intermodulation terms which will then = appear in the baseband. =20 In direct conversion, as the signal of interest is converted to baseband = very early in the receive chain, without any filtering other than RF = band-selection, various phenomena contribute to the creation of DC = signals, which directly appear as interfering signals in the band of = interest. The LO may be conducted or radiated through an unintended = path to the mixer's RF input port, thus effectively mixing with itself, = producing an unwanted DC component at the mixer output. Worse still, = this LO leakage may reach the LNA input, producing an even stronger = result. This effect presents a high barrier against the integration of = LO, mixer and LNA on a single silicon substrate, where numerous = mechanisms can contribute to poor isolation. These include substrate = coupling, ground bounce, bond wire radiation, and capacitive and = magnetic coupling. I=E2=80=99ve seen LO signals cross over the PCI bus = lines. (Vivato had a design with 14 802.11b (superhet) radios on the = same PCB. I improved that to 6 802.11g (DC, Atheros) radios on discrete = cards.) Conversely, a strong in-band interference signal, once amplified by the = LNA, may find a path to the LO-input port of the mixer, thus once again = producing self-mixing.=20 Some amount of LO power will be conducted through the mixer and LNA (due = to their non-ideal reverse isolation) to the antenna. The radiated = power, appearing as an interferer to other receivers in the = corresponding band, may violate emissions standards of the given system. = It is important to note that since the LO frequency is inside the = receive band, the front-end filters do nothing to suppress this LO = emission. Additionally, the radiated LO signal can then be reflected by = buildings or moving objects and re-captured by the antenna. This effect, = however, is not of significant importance compared to the aforementioned = LO self-mixing and blocking signal self-mixing.=20 The leakage of LO or RF signals to the opposite mixer port is not the = only way in which unwanted DC can be produced. Any stage that exhibits = even-order nonlinearity will also generate a DC output. Suffice it to state that many people have this idea, but few actually = endure the engineering to make it a) work and b) be legal in a given = (set of) regulatory domain(s). >>> - Has or supports at least 2 1GbE ports. Prefer 3-5 ports with = switching functionality >>> - Storage not super constrained. Built-in storage (if any) can be = small (which I=E2=80=99m arbitrarily defining as less than 128MB) if = there is also an SD card slot or similar. USB storage will do in a = pinch. >>> - Has at least 2 free USB ports after meeting previous requirements >>> - Serial port or header (or GPIO pins that can be used as one? Not = too familiar with that) >>> - Low power consumption (within reason taking the above into = account) >>> - Low cost (again, within reason) >>>=20 >>> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. >>=20 >> you can probably get APU in low-volume, but quantity is very = constrained these days (it=E2=80=99s been true all year). >=20 > Good to know. >=20 >> We do have the RCC-VE and RCC-DFF units available. >>=20 >> http://store.netgate.com/Desktop-Systems-C83.aspx >=20 > Thanks for the link! You could also look at Minnowboard Max (quite difficult to get) or = Minnowboard Turbot. http://www.minnowboard.org/meet-minnowboard-max/ From owner-freebsd-wireless@freebsd.org Fri Oct 23 11:23:07 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 56DECA1C52F; Fri, 23 Oct 2015 11:23:07 +0000 (UTC) (envelope-from huubsch@xs4all.nl) Received: from lb2-smtp-cloud3.xs4all.net (lb2-smtp-cloud3.xs4all.net [194.109.24.26]) (using TLSv1 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (Client CN "*.xs4all.nl", Issuer "GlobalSign Domain Validation CA - SHA256 - G2" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id C64D91C55; Fri, 23 Oct 2015 11:23:06 +0000 (UTC) (envelope-from huubsch@xs4all.nl) Received: from iMac-van-Huub.fritz.box ([83.160.119.88]) by smtp-cloud3.xs4all.net with ESMTP id YbMs1r00F1uXTTF01bMtqT; Fri, 23 Oct 2015 13:21:54 +0200 Subject: Re: looking for suggestions for a small router/appliance board/SoC To: freebsd-wireless@freebsd.org, freebsd-embedded@freebsd.org References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> From: Huub Schuurmans Message-ID: <562A1850.9040602@xs4all.nl> Date: Fri, 23 Oct 2015 13:21:52 +0200 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:38.0) Gecko/20100101 Thunderbird/38.3.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Oct 2015 11:23:07 -0000 Op 22/10/15 om 20:19 schreef Jim Thompson: >> >> I may just start with a PC Engines apu1d, but if there are boards that are smaller, cheaper, have lower power requirements and/or have integrated wifi or switch capabilities I’d like to look in to them as well. > > you can probably get APU in low-volume, but quantity is very constrained these days (it’s been true all year). > APU meets all your specifications, we have never had a problem in getting these from PCEngines. Acoording to their website they have some 500 in stock now. Huub From owner-freebsd-wireless@freebsd.org Fri Oct 23 14:47:14 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id EACD2A1DB85 for ; Fri, 23 Oct 2015 14:47:14 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D734110F for ; Fri, 23 Oct 2015 14:47:14 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9NElEhr023868 for ; Fri, 23 Oct 2015 14:47:14 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203887] Integer divide panic Date: Fri, 23 Oct 2015 14:47:15 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 10.1-RELEASE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Some People X-Bugzilla-Who: ml@netfence.it X-Bugzilla-Status: In Progress X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Oct 2015 14:47:15 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203887 --- Comment #2 from ml@netfence.it --- I rebuilt my kernel with this patch and had no error. I'll report back in case I see this panic again, altough it was very rare in any case (so no panic doesn't mean problem fixed). -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Fri Oct 23 17:08:46 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id BF1B3A1CE67 for ; Fri, 23 Oct 2015 17:08:46 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id AD09568A for ; Fri, 23 Oct 2015 17:08:46 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9NH8kJo002474 for ; Fri, 23 Oct 2015 17:08:46 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203875] Kernel panic when destroying wlan0 iwn 6205 Date: Fri, 23 Oct 2015 17:08:46 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: tim@orgizm.net X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Oct 2015 17:08:46 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=203875 --- Comment #1 from tim@orgizm.net --- Hi, The wpa_supplicant not working unless waiting for 10secs after creating the wlan interface issue seems to be fixed in r289718 The kernel panic issue when destroying the wlan interface however does persist, not always though, when the system had been up for hours I have not been able to reproduce it at all, when I had just booted it, it crashed at every try. Fatal trap 9: general protection fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff80b3ff48 stack pointer = 0x28:0xfffffe0460f20940 frame pointer = 0x28:0xfffffe0460f20960 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (iwn0 net80211 taskq) Please excuse my English and many thanks Tim Beikuefner -- You are receiving this mail because: You are the assignee for the bug. From owner-freebsd-wireless@freebsd.org Fri Oct 23 22:41:32 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 40279A1D0DD; Fri, 23 Oct 2015 22:41:32 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from webmail2.jnielsen.net (webmail2.jnielsen.net [50.114.224.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "webmail2.jnielsen.net", Issuer "freebsdsolutions.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 177DE829; Fri, 23 Oct 2015 22:41:31 +0000 (UTC) (envelope-from lists@jnielsen.net) Received: from [10.10.1.196] (office.betterlinux.com [199.58.199.60]) (authenticated bits=0) by webmail2.jnielsen.net (8.15.1/8.15.1) with ESMTPSA id t9NMfMp7054491 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 23 Oct 2015 16:41:25 -0600 (MDT) (envelope-from lists@jnielsen.net) X-Authentication-Warning: webmail2.jnielsen.net: Host office.betterlinux.com [199.58.199.60] claimed to be [10.10.1.196] Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.1 \(3096.5\)) Subject: Re: looking for suggestions for a small router/appliance board/SoC From: John Nielsen In-Reply-To: <562A1850.9040602@xs4all.nl> Date: Fri, 23 Oct 2015 16:41:22 -0600 Content-Transfer-Encoding: quoted-printable Message-Id: <315B1E0A-8658-432E-8DBC-CBBB6FC7D0D3@jnielsen.net> References: <2EB47812-4744-48B5-BEBF-B2074D9EEA8F@jnielsen.net> <562A1850.9040602@xs4all.nl> To: freebsd-wireless@freebsd.org, freebsd-embedded@freebsd.org X-Mailer: Apple Mail (2.3096.5) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 23 Oct 2015 22:41:32 -0000 On Oct 23, 2015, at 5:21 AM, Huub Schuurmans wrote: > Op 22/10/15 om 20:19 schreef Jim Thompson: >=20 >>>=20 >>> I may just start with a PC Engines apu1d, but if there are boards = that are smaller, cheaper, have lower power requirements and/or have = integrated wifi or switch capabilities I=E2=80=99d like to look in to = them as well. >>=20 >> you can probably get APU in low-volume, but quantity is very = constrained these days (it=E2=80=99s been true all year). >=20 > APU meets all your specifications, we have never had a problem in > getting these from PCEngines. Acoording to their website they have = some > 500 in stock now. Yes, I=E2=80=99ll probably stick with an APU for now since I can get it = with dual wireless cards and a 4GB SD card for just over $200 US. I=E2=80=99d still like something smaller if possible, though. It looks = like there are some MIPS wireless access points that could fit the bill = if I revise my requirements (especially storage). I see there are = freebsd-wifi-build scripts for the TP-Link TL-WDR3600, so it might be a = good starting point. Has anyone tried a newer TP-Link like the WDR4300? = Other suggestions? Thanks! Revised requirements: - Capable of running FreeBSD - Dual band wifi with adapters supported by FreeBSD in HOSTAP mode = (Qualcomm/Atheros good, Broadcom bad?) - 3+ GbE ports - 8+ MB of storage (if Adrian=E2=80=99s scripts can still do an image = that small with some headroom), more is better - 64+ MB of RAM, more is better - 2 USB ports JN From owner-freebsd-wireless@freebsd.org Sat Oct 24 08:44:14 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B2D3EA1C06E for ; Sat, 24 Oct 2015 08:44:14 +0000 (UTC) (envelope-from ish@amail.plala.or.jp) Received: from msa03b.plala.or.jp (msa03.plala.or.jp [58.93.240.3]) by mx1.freebsd.org (Postfix) with ESMTP id F04B47BD for ; Sat, 24 Oct 2015 08:44:13 +0000 (UTC) (envelope-from ish@amail.plala.or.jp) Received: from msc01.plala.or.jp ([172.23.12.31]) by msa03b.plala.or.jp with ESMTP id <20151024084405.SCNH3812.msa03b.plala.or.jp@msc01.plala.or.jp> for ; Sat, 24 Oct 2015 17:44:05 +0900 Received: from localhost ([121.117.75.1]) by msc01.plala.or.jp with ESMTP id <20151024084405.JPUB13235.msc01.plala.or.jp@localhost> for ; Sat, 24 Oct 2015 17:44:05 +0900 Date: Sat, 24 Oct 2015 17:42:11 +0900 (JST) Message-Id: <20151024.174211.874653407366474985.ish@amail.plala.or.jp> To: freebsd-wireless@freebsd.org Subject: iwm fail to auth after one hour From: Masachika ISHIZUKA X-Mailer: Mew version 6.6 on Emacs 24.5 / Mule 6.0 (HANACHIRUSATO) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-VirusScan: Outbound; msa03m; Sat, 24 Oct 2015 17:44:05 +0900 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 24 Oct 2015 08:44:14 -0000 Hello. My dell PC(XPS12 9Q33) has intel AC 7260 wireless adaptor and it can work on iwm driver with WPA2-enterprise at FreeBSD 11.0-current. It is working about one hour, and then not working as follows. (1) Bootup time % ifconfig lo0: flags=8049 metric 0 mtu 16384 options=600003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21 groups: lo ue0: flags=8843 metric 0 mtu 1500 options=8000b ether XX:XX:XX:XX:XX:XX nd6 options=29 media: Ethernet autoselect (1000baseT ) status: active wlan0: flags=8843 metric 0 mtu 1500 ether XX:XX:XX:XX:XX:XX nd6 options=29 media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g status: associated ssid XXXXXXXXXXXX channel 3 (2422 MHz 11g) bssid XX:XX:XX:XX:XX:XX regdomain JAPAN country JP authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit txpower 23 bmiss 10 scanvalid 60 protmode CTS wme roaming MANUAL groups: wlan lagg0: flags=8843 metric 0 mtu 1500 ether XX:XX:XX:XX:XX:XX inet XXX.XXX.XXX.XXX netmask 0xffffff00 broadcast XXX.XXX.XXX.XXX inet6 fe80::XXXX:XXXX:XXXX:XXXX%lagg0 prefixlen 64 scopeid 0x4 inet6 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX prefixlen 64 autoconf nd6 options=23 media: Ethernet autoselect status: active groups: lagg laggproto failover lagghash l2,l3,l4 laggport: ue0 flags=5 laggport: wlan0 flags=0<> (2) About one hour later % ifconfig lo0: flags=8049 metric 0 mtu 16384 options=600003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21 groups: lo ue0: flags=8843 metric 0 mtu 1500 options=8000b ether XX:XX:XX:XX:XX:XX nd6 options=29 media: Ethernet autoselect (1000baseT ) status: active wlan0: flags=8843 metric 0 mtu 1500 ether XX:XX:XX:XX:XX:XX nd6 options=29 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 3 (2422 MHz 11g) regdomain JAPAN country JP authmode WPA2/802.11i privacy ON deftxkey UNDEF txpower 23 bmiss 10 scanvalid 60 protmode CTS wme roaming MANUAL groups: wlan lagg0: flags=8843 metric 0 mtu 1500 ether XX:XX:XX:XX:XX:XX inet XXX.XXX.XXX.XXX netmask 0xffffff00 broadcast XXX.XXX.XXX.XXX inet6 fe80::XXXX:XXXX:XXXX:XXXX%lagg0 prefixlen 64 scopeid 0x4 inet6 XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX prefixlen 64 autoconf nd6 options=23 media: Ethernet autoselect status: active groups: lagg laggproto failover lagghash l2,l3,l4 laggport: ue0 flags=5 laggport: wlan0 flags=0<> While about first one hour, if I unplugged ethernet cable then I can communicate with wifi(lagg0 over wlan0). After about one hour later, I can not communicate with wifi. (3) /var/log/messages Oct 24 13:33:43 carrot kernel: Copyright (c) 1992-2015 The FreeBSD Project. Oct 24 13:33:43 carrot kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Oct 24 13:33:43 carrot kernel: The Regents of the University of California. All rights reserved. Oct 24 13:33:43 carrot kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Oct 24 13:33:43 carrot kernel: FreeBSD 11.0-CURRENT #0 r289783: Fri Oct 23 19:41:03 JST 2015 Oct 24 13:33:43 carrot kernel: ishizuka@carrot.ish.org:/usr/obj/usr/src/sys/GENERIC amd64 Oct 24 13:33:43 carrot kernel: FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906 Oct 24 13:33:43 carrot kernel: WARNING: WITNESS option enabled, expect reduced performance. Oct 24 13:33:43 carrot kernel: VT(efifb): resolution 1920x1080 Oct 24 13:33:43 carrot kernel: info: [drm] Initialized drm 1.1.0 20060810 Oct 24 13:33:43 carrot kernel: CPU: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (2394.51-MHz K8-class CPU) Oct 24 13:33:43 carrot kernel: Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Oct 24 13:33:43 carrot kernel: Features=0xbfebfbff Oct 24 13:33:43 carrot kernel: Features2=0x7fdafbbf Oct 24 13:33:43 carrot kernel: AMD Features=0x2c100800 Oct 24 13:33:43 carrot kernel: AMD Features2=0x21 Oct 24 13:33:43 carrot kernel: Structured Extended Features=0x27ab Oct 24 13:33:43 carrot kernel: XSAVE Features=0x1 Oct 24 13:33:43 carrot kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID Oct 24 13:33:43 carrot kernel: TSC: P-state invariant, performance statistics Oct 24 13:33:43 carrot kernel: real memory = 8589934592 (8192 MB) Oct 24 13:33:43 carrot kernel: avail memory = 8162115584 (7784 MB) Oct 24 13:33:43 carrot kernel: Event timer "LAPIC" quality 600 Oct 24 13:33:43 carrot kernel: ACPI APIC Table: Oct 24 13:33:43 carrot kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Oct 24 13:33:43 carrot kernel: FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads Oct 24 13:33:43 carrot kernel: cpu0 (BSP): APIC ID: 0 Oct 24 13:33:43 carrot kernel: cpu1 (AP): APIC ID: 1 Oct 24 13:33:43 carrot kernel: cpu2 (AP): APIC ID: 2 Oct 24 13:33:43 carrot kernel: cpu3 (AP): APIC ID: 3 Oct 24 13:33:43 carrot kernel: random: unblocking device. Oct 24 13:33:43 carrot kernel: ioapic0 irqs 0-39 on motherboard Oct 24 13:33:43 carrot kernel: random: entropy device external interface Oct 24 13:33:43 carrot kernel: kbd1 at kbdmux0 Oct 24 13:33:43 carrot kernel: netmap: loaded module Oct 24 13:33:43 carrot kernel: module_register_init: MOD_LOAD (vesa, 0xffffffff80edc440, 0) error 19 Oct 24 13:33:43 carrot kernel: random: registering fast source Intel Secure Key RNG Oct 24 13:33:43 carrot kernel: random: fast provider: "Intel Secure Key RNG" Oct 24 13:33:43 carrot kernel: cryptosoft0: on motherboard Oct 24 13:33:43 carrot kernel: acpi0: on motherboard Oct 24 13:33:43 carrot kernel: acpi0: Power Button (fixed) Oct 24 13:33:43 carrot kernel: cpu0: on acpi0 Oct 24 13:33:43 carrot kernel: cpu1: on acpi0 Oct 24 13:33:43 carrot kernel: cpu2: on acpi0 Oct 24 13:33:43 carrot kernel: cpu3: on acpi0 Oct 24 13:33:43 carrot kernel: hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Oct 24 13:33:43 carrot kernel: Timecounter "HPET" frequency 14318180 Hz quality 950 Oct 24 13:33:43 carrot kernel: Event timer "HPET" frequency 14318180 Hz quality 550 Oct 24 13:33:43 carrot kernel: Event timer "HPET1" frequency 14318180 Hz quality 440 Oct 24 13:33:43 carrot kernel: Event timer "HPET2" frequency 14318180 Hz quality 440 Oct 24 13:33:43 carrot kernel: Event timer "HPET3" frequency 14318180 Hz quality 440 Oct 24 13:33:43 carrot kernel: Event timer "HPET4" frequency 14318180 Hz quality 440 Oct 24 13:33:43 carrot kernel: atrtc0: port 0x70-0x77 irq 8 on acpi0 Oct 24 13:33:43 carrot kernel: atrtc0: Warning: Couldn't map I/O. Oct 24 13:33:43 carrot kernel: Event timer "RTC" frequency 32768 Hz quality 0 Oct 24 13:33:43 carrot kernel: attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Oct 24 13:33:43 carrot kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Oct 24 13:33:43 carrot kernel: Event timer "i8254" frequency 1193182 Hz quality 100 Oct 24 13:33:43 carrot kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 Oct 24 13:33:43 carrot kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 Oct 24 13:33:43 carrot kernel: acpi_ec0: port 0x62,0x66 on acpi0 Oct 24 13:33:43 carrot kernel: pcib0: port 0xcf8-0xcff on acpi0 Oct 24 13:33:43 carrot kernel: pci0: on pcib0 Oct 24 13:33:43 carrot kernel: vgapci0: port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 Oct 24 13:33:43 carrot kernel: acpi_video0: on vgapci0 Oct 24 13:33:43 carrot kernel: vgapci0: Boot video device Oct 24 13:33:43 carrot kernel: hdac0: mem 0xf7d14000-0xf7d17fff irq 16 at device 3.0 on pci0 Oct 24 13:33:43 carrot kernel: xhci0: mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 Oct 24 13:33:43 carrot kernel: xhci0: 32 bytes context size, 64-bit DMA Oct 24 13:33:43 carrot kernel: xhci0: Port routing mask set to 0xffffffff Oct 24 13:33:43 carrot kernel: usbus0 on xhci0 Oct 24 13:33:43 carrot kernel: pci0: at device 22.0 (no driver attached) Oct 24 13:33:43 carrot kernel: hdac1: mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 Oct 24 13:33:43 carrot kernel: pcib1: irq 16 at device 28.0 on pci0 Oct 24 13:33:43 carrot kernel: pci1: on pcib1 Oct 24 13:33:43 carrot kernel: pcib2: irq 18 at device 28.2 on pci0 Oct 24 13:33:43 carrot kernel: pci2: on pcib2 Oct 24 13:33:43 carrot kernel: iwm0: mem 0xf7c00000-0xf7c01fff irq 18 at device 0.0 on pci2 Oct 24 13:33:43 carrot kernel: ehci0: mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0 Oct 24 13:33:43 carrot kernel: usbus1: EHCI version 1.0 Oct 24 13:33:43 carrot kernel: usbus1 on ehci0 Oct 24 13:33:43 carrot kernel: isab0: at device 31.0 on pci0 Oct 24 13:33:43 carrot kernel: isa0: on isab0 Oct 24 13:33:43 carrot kernel: ahci0: port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0 Oct 24 13:33:43 carrot kernel: ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported Oct 24 13:33:43 carrot kernel: ahcich0: at channel 0 on ahci0 Oct 24 13:33:43 carrot kernel: acpi_button0: on acpi0 Oct 24 13:33:43 carrot kernel: acpi_lid0: on acpi0 Oct 24 13:33:43 carrot kernel: atkbdc0: port 0x60,0x64 irq 1 on acpi0 Oct 24 13:33:43 carrot kernel: atkbd0: irq 1 on atkbdc0 Oct 24 13:33:43 carrot kernel: kbd0 at atkbd0 Oct 24 13:33:43 carrot kernel: atkbd0: [GIANT-LOCKED] Oct 24 13:33:43 carrot kernel: psm0: irq 12 on atkbdc0 Oct 24 13:33:43 carrot kernel: psm0: [GIANT-LOCKED] Oct 24 13:33:43 carrot kernel: psm0: model Generic PS/2 mouse, device ID 0 Oct 24 13:33:43 carrot kernel: battery0: on acpi0 Oct 24 13:33:43 carrot kernel: acpi_acad0: on acpi0 Oct 24 13:33:43 carrot kernel: ppc0: cannot reserve I/O port range Oct 24 13:33:43 carrot kernel: est0: on cpu0 Oct 24 13:33:43 carrot kernel: est1: on cpu1 Oct 24 13:33:43 carrot kernel: est2: on cpu2 Oct 24 13:33:43 carrot kernel: est3: on cpu3 Oct 24 13:33:43 carrot kernel: fuse-freebsd: version 0.4.4, FUSE ABI 7.8 Oct 24 13:33:43 carrot kernel: Timecounters tick every 1.000 msec Oct 24 13:33:43 carrot kernel: IPsec: Initialized Security Association Processing. Oct 24 13:33:43 carrot kernel: hdacc0: at cad 0 on hdac0 Oct 24 13:33:43 carrot kernel: hdaa0: at nid 1 on hdacc0 Oct 24 13:33:43 carrot kernel: pcm0: at nid 3 on hdaa0 Oct 24 13:33:43 carrot kernel: hdacc1: at cad 0 on hdac1 Oct 24 13:33:43 carrot kernel: hdaa1: at nid 1 on hdacc1 Oct 24 13:33:43 carrot kernel: pcm1: at nid 20,21 and 18 on hdaa1 Oct 24 13:33:43 carrot kernel: usbus0: 5.0Gbps Super Speed USB v3.0 Oct 24 13:33:43 carrot kernel: usbus1: 480Mbps High Speed USB v2.0 Oct 24 13:33:43 carrot kernel: ugen0.1: <0x8086> at usbus0 Oct 24 13:33:43 carrot kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Oct 24 13:33:43 carrot kernel: ugen1.1: at usbus1 Oct 24 13:33:43 carrot kernel: uhub1: on usbus1 Oct 24 13:33:43 carrot kernel: iwm0: revision: 0x140, firmware 25.228 (API ver. 9) Oct 24 13:33:43 carrot kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 Oct 24 13:33:43 carrot kernel: ada0: ATA8-ACS SATA 3.x device Oct 24 13:33:43 carrot kernel: ada0: Serial Number TW0XXM305508536E0419 Oct 24 13:33:43 carrot kernel: ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Oct 24 13:33:43 carrot kernel: ada0: Command Queueing enabled Oct 24 13:33:43 carrot kernel: ada0: 244198MB (500118192 512 byte sectors) Oct 24 13:33:43 carrot kernel: SMP: AP CPU #1 Launched! Oct 24 13:33:43 carrot kernel: SMP: AP CPU #2 Launched! Oct 24 13:33:43 carrot kernel: SMP: AP CPU #3 Launched! Oct 24 13:33:43 carrot kernel: Timecounter "TSC-low" frequency 1197252750 Hz quality 1000 Oct 24 13:33:43 carrot kernel: WARNING: WITNESS option enabled, expect reduced performance. Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus1 usbus0 Oct 24 13:33:43 carrot kernel: uhub0: 13 ports with 13 removable, self powered Oct 24 13:33:43 carrot kernel: uhub1: 2 ports with 2 removable, self powered Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus1 usbus0 Oct 24 13:33:43 carrot kernel: ugen1.2: at usbus1 Oct 24 13:33:43 carrot kernel: uhub2: on usbus1 Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus1 usbus0 Oct 24 13:33:43 carrot kernel: uhub2: 8 ports with 8 removable, self powered Oct 24 13:33:43 carrot kernel: ugen0.2: at usbus0 Oct 24 13:33:43 carrot kernel: uhub3: on usbus0 Oct 24 13:33:43 carrot kernel: uhub3: MTT enabled Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: uhub3: 4 ports with 1 removable, self powered Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: ugen0.3: at usbus0 Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored) Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored) Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT Oct 24 13:33:43 carrot kernel: ugen0.4: at usbus0 (disconnected) Oct 24 13:33:43 carrot kernel: uhub_reattach_port: could not allocate new device Oct 24 13:33:43 carrot kernel: ugen0.4: at usbus0 Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: ugen0.5: at usbus0 Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: ugen0.6: at usbus0 Oct 24 13:33:43 carrot kernel: uhub4: <> on usbus0 Oct 24 13:33:43 carrot kernel: uhub4: 4 ports with 1 removable, self powered Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: ugen0.7: at usbus0 Oct 24 13:33:43 carrot kernel: axge0: on usbus0 Oct 24 13:33:43 carrot kernel: miibus0: on axge0 Oct 24 13:33:43 carrot kernel: rgephy0: PHY 3 on miibus0 Oct 24 13:33:43 carrot kernel: rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow Oct 24 13:33:43 carrot kernel: ue0: on axge0 Oct 24 13:33:43 carrot kernel: ue0: Ethernet address: XX:XX:XX:XX:XX:XX Oct 24 13:33:43 carrot kernel: Root mount waiting for: usbus0 Oct 24 13:33:43 carrot kernel: ugen0.8: at usbus0 Oct 24 13:33:43 carrot kernel: umass0: on usbus0 Oct 24 13:33:43 carrot kernel: umass0: SCSI over Bulk-Only; quirks = 0x0100 Oct 24 13:33:43 carrot kernel: umass0:1:0: Attached to scbus1 Oct 24 13:33:43 carrot kernel: Trying to mount root from ufs:/dev/da0p3 [rw]... Oct 24 13:33:43 carrot kernel: mountroot: waiting for device /dev/da0p3 ... Oct 24 13:33:43 carrot kernel: (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 Oct 24 13:33:43 carrot kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error Oct 24 13:33:43 carrot kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition Oct 24 13:33:43 carrot kernel: (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) Oct 24 13:33:43 carrot kernel: (probe0:umass-sim0:0:0:0): Error 22, Unretryable error Oct 24 13:33:43 carrot kernel: da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 Oct 24 13:33:43 carrot kernel: da0: Fixed Direct Access SPC-4 SCSI device Oct 24 13:33:43 carrot kernel: da0: Serial Number 444182F62010 Oct 24 13:33:43 carrot kernel: da0: 400.000MB/s transfers Oct 24 13:33:43 carrot kernel: da0: 1907729MB (3907029164 512 byte sectors) Oct 24 13:33:43 carrot kernel: da0: quirks=0x2 Oct 24 13:33:43 carrot kernel: lock order reversal: Oct 24 13:33:43 carrot kernel: 1st 0xfffff80008b79418 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2231 Oct 24 13:33:43 carrot kernel: 2nd 0xfffffe01ea82ba40 bufwait (bufwait) @ /usr/src/sys/ufs/ffs/ffs_vnops.c:263 Oct 24 13:33:43 carrot kernel: 3rd 0xfffff80008c64068 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2231 Oct 24 13:33:43 carrot kernel: KDB: stack backtrace: Oct 24 13:33:43 carrot kernel: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0233b31d40 Oct 24 13:33:43 carrot kernel: witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe0233b31dc0 Oct 24 13:33:43 carrot kernel: __lockmgr_args() at __lockmgr_args+0xd3b/frame 0xfffffe0233b31e70 Oct 24 13:33:43 carrot kernel: ffs_lock() at ffs_lock+0xa6/frame 0xfffffe0233b31ec0 Oct 24 13:33:43 carrot kernel: VOP_LOCK1_APV() at VOP_LOCK1_APV+0x100/frame 0xfffffe0233b31ef0 Oct 24 13:33:43 carrot kernel: _vn_lock() at _vn_lock+0x9a/frame 0xfffffe0233b31f60 Oct 24 13:33:43 carrot kernel: vget() at vget+0x63/frame 0xfffffe0233b31fb0 Oct 24 13:33:43 carrot kernel: vfs_hash_get() at vfs_hash_get+0xcc/frame 0xfffffe0233b32000 Oct 24 13:33:43 carrot kernel: ffs_vgetf() at ffs_vgetf+0x40/frame 0xfffffe0233b32090 Oct 24 13:33:43 carrot kernel: softdep_sync_buf() at softdep_sync_buf+0xad1/frame 0xfffffe0233b32170 Oct 24 13:33:43 carrot kernel: ffs_syncvnode() at ffs_syncvnode+0x256/frame 0xfffffe0233b321f0 Oct 24 13:33:43 carrot kernel: ffs_truncate() at ffs_truncate+0x6cd/frame 0xfffffe0233b323e0 Oct 24 13:33:43 carrot kernel: ufs_direnter() at ufs_direnter+0x7bb/frame 0xfffffe0233b324b0 Oct 24 13:33:43 carrot kernel: ufs_makeinode() at ufs_makeinode+0x5f3/frame 0xfffffe0233b32670 Oct 24 13:33:43 carrot kernel: ufs_create() at ufs_create+0x2d/frame 0xfffffe0233b32690 Oct 24 13:33:43 carrot kernel: VOP_CREATE_APV() at VOP_CREATE_APV+0xf1/frame 0xfffffe0233b326c0 Oct 24 13:33:43 carrot kernel: vn_open_cred() at vn_open_cred+0x2f8/frame 0xfffffe0233b32830 Oct 24 13:33:43 carrot kernel: kern_openat() at kern_openat+0x25c/frame 0xfffffe0233b329a0 Oct 24 13:33:43 carrot kernel: amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe0233b32ab0 Oct 24 13:33:43 carrot kernel: Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0233b32ab0 Oct 24 13:33:43 carrot kernel: --- syscall (499, FreeBSD ELF64, sys_openat), rip = 0x800b5cb0a, rsp = 0x7fffffffd538, rbp = 0x7fffffffd620 --- Oct 24 13:33:43 carrot kernel: wlan0: Ethernet address: XX:XX:XX:XX:XX:XX Oct 24 13:33:43 carrot kernel: ue0: link state changed to DOWN Oct 24 13:33:43 carrot kernel: lock order reversal: Oct 24 13:33:43 carrot kernel: 1st 0xfffff80008799a08 if_lagg rmlock (if_lagg rmlock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1445 Oct 24 13:33:43 carrot kernel: 2nd 0xfffff80008a69990 if_addr_lock (if_addr_lock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1549 Oct 24 13:33:43 carrot kernel: KDB: stack backtrace: Oct 24 13:33:43 carrot kernel: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0233ba05f0 Oct 24 13:33:43 carrot kernel: witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe0233ba0670 Oct 24 13:33:43 carrot kernel: _rw_wlock_cookie() at _rw_wlock_cookie+0x6e/frame 0xfffffe0233ba06b0 Oct 24 13:33:43 carrot kernel: lagg_ether_cmdmulti() at lagg_ether_cmdmulti+0x5c/frame 0xfffffe0233ba06f0 Oct 24 13:33:43 carrot kernel: lagg_ioctl() at lagg_ioctl+0x1175/frame 0xfffffe0233ba07d0 Oct 24 13:33:43 carrot kernel: ifioctl() at ifioctl+0x10c6/frame 0xfffffe0233ba0860 Oct 24 13:33:43 carrot kernel: kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe0233ba08c0 Oct 24 13:33:43 carrot kernel: sys_ioctl() at sys_ioctl+0x17e/frame 0xfffffe0233ba09a0 Oct 24 13:33:43 carrot kernel: amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe0233ba0ab0 Oct 24 13:33:43 carrot kernel: Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0233ba0ab0 Oct 24 13:33:43 carrot kernel: --- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011f316a, rsp = 0x7fffffffe3a8, rbp = 0x7fffffffe420 --- Oct 24 13:33:43 carrot kernel: lagg0: link state changed to DOWN Oct 24 13:33:43 carrot kernel: lock order reversal: Oct 24 13:33:43 carrot kernel: 1st 0xfffff80008799a08 if_lagg rmlock (if_lagg rmlock) @ /usr/src/sys/modules/if_lagg/../../net/if_lagg.c:1498 Oct 24 13:33:43 carrot kernel: 2nd 0xfffff80008861ac0 axge0 (axge0) @ /usr/src/sys/modules/usb/uether/../../../dev/usb/net/usb_ethernet.c:518 Oct 24 13:33:43 carrot kernel: KDB: stack backtrace: Oct 24 13:33:43 carrot kernel: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0233ba0310 Oct 24 13:33:43 carrot kernel: witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe0233ba0390 Oct 24 13:33:43 carrot kernel: __mtx_lock_flags() at __mtx_lock_flags+0xa4/frame 0xfffffe0233ba03e0 Oct 24 13:33:43 carrot kernel: uether_ioctl() at uether_ioctl+0x5a/frame 0xfffffe0233ba0410 Oct 24 13:33:43 carrot kernel: lagg_port_ioctl() at lagg_port_ioctl+0xde/frame 0xfffffe0233ba0480 Oct 24 13:33:43 carrot kernel: if_addmulti() at if_addmulti+0x253/frame 0xfffffe0233ba0500 Oct 24 13:33:43 carrot kernel: lagg_ether_cmdmulti() at lagg_ether_cmdmulti+0x158/frame 0xfffffe0233ba0540 Oct 24 13:33:43 carrot kernel: lagg_ioctl() at lagg_ioctl+0xed/frame 0xfffffe0233ba0620 Oct 24 13:33:43 carrot kernel: if_addmulti() at if_addmulti+0x253/frame 0xfffffe0233ba06a0 Oct 24 13:33:43 carrot kernel: in_joingroup_locked() at in_joingroup_locked+0x116/frame 0xfffffe0233ba0720 Oct 24 13:33:43 carrot kernel: in_joingroup() at in_joingroup+0x42/frame 0xfffffe0233ba0750 Oct 24 13:33:43 carrot kernel: in_control() at in_control+0x9e7/frame 0xfffffe0233ba07d0 Oct 24 13:33:43 carrot kernel: ifioctl() at ifioctl+0x10c6/frame 0xfffffe0233ba0860 Oct 24 13:33:43 carrot kernel: kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe0233ba08c0 Oct 24 13:33:43 carrot kernel: sys_ioctl() at sys_ioctl+0x17e/frame 0xfffffe0233ba09a0 Oct 24 13:33:43 carrot kernel: amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe0233ba0ab0 Oct 24 13:33:43 carrot kernel: Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0233ba0ab0 Oct 24 13:33:43 carrot kernel: --- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8011f316a, rsp = 0x7fffffffe428, rbp = 0x7fffffffe470 --- Oct 24 13:33:43 carrot kernel: ue0: link state changed to UP Oct 24 13:33:43 carrot kernel: lagg0: link state changed to UP Oct 24 13:33:43 carrot kernel: ums0: on usbus0 Oct 24 13:33:43 carrot kernel: ums0: 4 buttons and [XYZ] coordinates ID=0 Oct 24 13:33:43 carrot kernel: uhid0: on usbus0 Oct 24 13:33:43 carrot kernel: iwm0: iwm_update_edca: called Oct 24 13:33:43 carrot kernel: iwm0: iwm_update_edca: called Oct 24 13:33:43 carrot kernel: wlan0: link state changed to UP Oct 24 13:33:43 carrot kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Oct 24 13:33:45 carrot kernel: . Oct 24 13:33:46 carrot ntpd[893]: ntpd 4.2.8p4-a (1): Starting Oct 24 13:33:46 carrot kernel: . Oct 24 13:33:46 carrot ntpd[894]: leapsecond file ('/etc/ntp/leap-seconds'): good hash signature Oct 24 13:33:46 carrot kernel: . Oct 24 13:33:46 carrot ntpd[894]: leapsecond file ('/etc/ntp/leap-seconds'): loaded, expire=2015-12-28T00:00:00Z last=2015-07-01T00:00:00Z ofs=36 Oct 24 13:33:50 carrot dbus[939]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper) Oct 24 13:33:51 carrot dbus[939]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper) Oct 24 13:33:52 carrot dbus[939]: [system] Successfully activated service 'org.freedesktop.PolicyKit1' Oct 24 13:33:52 carrot dbus[939]: [system] Successfully activated service 'org.freedesktop.ConsoleKit' Oct 24 14:33:37 carrot wpa_supplicant[340]: wlan0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX:XX reason=0 Oct 24 14:33:37 carrot kernel: wlan0: link state changed to DOWN Oct 24 14:33:37 carrot kernel: wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost Oct 24 14:33:37 carrot kernel: iwm0: iwm_update_edca: called Oct 24 14:33:37 carrot wpa_supplicant[340]: wlan0: Trying to associate with XX:XX:XX:XX:XX:XX (SSID='XXXXXXXXXXXXXX' freq=2422 MHz) Oct 24 14:33:37 carrot kernel: iwm0: iwm_update_edca: called Oct 24 14:33:37 carrot kernel: iwm0: dumping device error log Oct 24 14:33:37 carrot kernel: iwm0: Start IWL Error Log Dump: Oct 24 14:33:37 carrot kernel: iwm0: Status: 0x3, count: 6 Oct 24 14:33:37 carrot kernel: iwm0: 0x00003001 | ADVANCED_SYSASSERT Oct 24 14:33:37 carrot kernel: iwm0: 000002A0 | uPc Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | branchlink1 Oct 24 14:33:37 carrot kernel: iwm0: 00000BA4 | branchlink2 Oct 24 14:33:37 carrot kernel: iwm0: 0001626C | interruptlink1 Oct 24 14:33:37 carrot kernel: iwm0: 008A1088 | interruptlink2 Oct 24 14:33:37 carrot kernel: iwm0: 00000001 | data1 Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | data2 Oct 24 14:33:37 carrot kernel: iwm0: DEADBEEF | data3 Oct 24 14:33:37 carrot kernel: iwm0: 003FC926 | beacon time Oct 24 14:33:37 carrot kernel: iwm0: 000036D9 | tsf low Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | tsf hi Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | time gp1 Oct 24 14:33:37 carrot kernel: iwm0: 000036DA | time gp2 Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | time gp3 Oct 24 14:33:37 carrot kernel: iwm0: 000419E4 | uCode version Oct 24 14:33:37 carrot kernel: iwm0: 00000144 | hw version Oct 24 14:33:37 carrot kernel: iwm0: 00009004 | board version Oct 24 14:33:37 carrot kernel: iwm0: 091F002B | hcmd Oct 24 14:33:37 carrot kernel: iwm0: 00022081 | isr0 Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | isr1 Oct 24 14:33:37 carrot kernel: iwm0: 00000002 | isr2 Oct 24 14:33:37 carrot kernel: iwm0: 0041DCC0 | isr3 Oct 24 14:33:37 carrot kernel: iwm0: 00000001 | isr4 Oct 24 14:33:37 carrot kernel: iwm0: 01002112 | isr_pref Oct 24 14:33:37 carrot kernel: iwm0: 00000000 | wait_event Oct 24 14:33:37 carrot kernel: iwm0: 000000D4 | l2p_control Oct 24 14:33:37 carrot kernel: iwm0: 00018020 | l2p_duration Oct 24 14:33:37 carrot kernel: iwm0: 00000007 | l2p_mhvalid Oct 24 14:33:37 carrot kernel: iwm0: 00000081 | l2p_addr_match Oct 24 14:33:37 carrot kernel: iwm0: 00000005 | lmpm_pmg_sel Oct 24 14:33:37 carrot kernel: iwm0: 20111734 | timestamp Oct 24 14:33:37 carrot kernel: iwm0: 00002028 | flow_handler Oct 24 14:33:37 carrot kernel: iwm0: driver status: Oct 24 14:33:37 carrot kernel: iwm0: tx ring 0: qid=0 cur=2 queued=2 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 1: qid=1 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 2: qid=2 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 3: qid=3 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 4: qid=4 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 5: qid=5 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 6: qid=6 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 7: qid=7 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 8: qid=8 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 9: qid=9 cur=32 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 10: qid=10 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 11: qid=11 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 12: qid=12 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 13: qid=13 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 14: qid=14 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 15: qid=15 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 16: qid=16 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 17: qid=17 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 18: qid=18 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: tx ring 19: qid=19 cur=0 queued=0 Oct 24 14:33:37 carrot kernel: iwm0: rx ring: cur=33 Oct 24 14:33:37 carrot kernel: iwm0: 802.11 state 2 Oct 24 14:33:37 carrot kernel: iwm0: fatal firmware error Oct 24 14:33:38 carrot kernel: iwm0: iwm_auth: binding cmd Oct 24 14:33:38 carrot kernel: iwm0: iwm_newstate: could not move to auth state: 35 Oct 24 14:33:47 carrot wpa_supplicant[340]: wlan0: Authentication with XX:XX:XX:XX:XX:XX timed out. Oct 24 14:33:47 carrot wpa_supplicant[340]: wlan0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX:XX reason=3 locally_generated=1 Oct 24 14:33:47 carrot kernel: iwm0: could not initiate scan -- Masachika ISHIZUKA From owner-freebsd-wireless@freebsd.org Sat Oct 24 19:25:58 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 67AC4A1DA94 for ; Sat, 24 Oct 2015 19:25:58 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 378B597A for ; Sat, 24 Oct 2015 19:25:58 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id t9OJPwQL097972 for ; Sat, 24 Oct 2015 19:25:58 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 203271] Wi-Fi no longer driven on some hardware with 11.0-CURRENT Date: Sat, 24 Oct 2015 19:25:56 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: regression X-Bugzilla-Severity: Affects Some People X-Bugzilla-Who: grahamperrin@gmail.com X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 24 Oct 2015 19:25:58 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D203271 --- Comment #10 from Graham Perrin --- I had symptoms of what may be the same bug on a different machine, an Ergo Vista 621 https://forums.pcbsd.org/thread-20235.html and in this case, the = GUI to the Wi-Fi adapter was:=20 * present with 11.0-CURRENTOCT2015 updated from an earlier version of the OS * not present with a clean installation of 11.0-CURRENTOCT2015 Following advice from LooX in irc://chat.freenode.net/#pcbsd I added a line= to=20 /etc/rc.conf wlans_wpi0=3D"wlan0" =E2=80=93 then a restart of the OS, and then Wi-Fi was configurable.=20 Now:=20 $ date ; freebsd-version ; uname -a ; cat /etc/rc.conf Sat 24 Oct 2015 20:17:54 BST 11.0-CURRENTOCT2015 FreeBSD cces3-gjp4-pc-bsd-ergovista621.university.brighton.ac.uk 11.0-CURRENTOCT2015 FreeBSD 11.0-CURRENTOCT2015 #1 9551f87(master): Fri Sep= 25 21:43:02 UTC 2015=20=20=20=20 root@devastator:/usr/obj/net/executor/builds/git/freebsd-11-current/sys/GEN= ERIC amd64 # Auto-Enabled NICs from pc-sysinstall ifconfig_re0=3D"DHCP" # Auto-Enabled NICs from pc-sysinstall ifconfig_re0_ipv6=3D"inet6 accept_rtadv" hostname=3D"cces3-gjp4-pc-bsd-ergovista621.university.brighton.ac.uk" pcsysconfig_enable=3D"YES" zfs_enable=3D"YES" sshd_enable=3D"YES" # https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D203271 and advice fro= m LooX wlans_wpi0=3D"wlan0" ifconfig_wlan0=3D"WPA SYNCDHCP" $ --=20 You are receiving this mail because: You are the assignee for the bug.=