Date: Fri, 29 Jul 2016 07:54:32 +0100 From: "Joe Holden" <mail@m.jwh.me.uk> To: <freebsd-mips@freebsd.org> Subject: MIPS64/ERL Message-ID: <002401d1e966$0f79c6b0$2e6d5410$@m.jwh.me.uk>
next in thread | raw e-mail | index | archive | help
Hi guys,
Just build 11.0-BETA2 for Edgerouter LIte coming from 10.x and there appears
to be some issues:
Observing sporadic panics on one acting as a router (Remote, can't easily
get serial console to it), and lockups on one I am using to build packages
with poudriere (doesn't emit anything on serial, just doesn't respond with
eg top running), neither will boot with WITNESS et al enabled so can't
really give much more info, just wondering if there is anything likely to
have broken it, boot attached for poudriere:
root@nas:~ # cu -l /dev/cuau0 -s 115200
Connected
Looking for valid bootloader image....
Jumping to start of image at address 0xbfc80000
U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 -
15:48:
51)
BIST check passed.
UBNT_E100 r1:2, r2:12, serial #: DC9FDB29A0A7
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 512 MB
Clearing DRAM....... done
Flash: 4 MB
Net: octeth0, octeth1, octeth2
USB: (port 0) scanning bus for devices... 1 USB Devices found
scanning bus for storage devices...
Device 0: Vendor: Verbatim Prod.: STORE N GO Rev: 1100
Type: Removable Hard Disk
Capacity: 3840.0 MB = 3.7 GB (7864320 x 512)
0
reading kernel
...........................................
....
9556888 bytes read
argv[2]: coremask=0x3
ELF file is 64 bit
Allocating memory for ELF segment: addr: 0xffffffff80100080 (adjusted to:
0x100080), size 0x82d2c0
Allocated memory for ELF segment: addr: 0xffffffff80100080, size 0x82d2c0
Processing PHDR 0
Loading 7a624c bytes at ffffffff80100080
Clearing 87074 bytes at ffffffff808a62cc
## Loading Linux kernel with entry point: 0xffffffff80100080 ...
Bootloader: Done loading app on coremask: 0x3
Using runtime CPU model checks.
CPU Model: CN5020p1.1-500-SCP
CPU clock: 500MHz Core Mask: 0x3
Board: CUST_UBIQUITI_E100
Board Type: 20002 Revision: 2/12
Serial number: DC9FDB29A0A7
MAC address base: dc:9f:db:29:a0:a7 (3 configured)
Cache info:
icache is virtual
picache_stride = 8192
picache_loopcount = 4
pdcache_stride = 256
pdcache_loopcount = 64
cpu0: Cavium processor v1.6
MMU: Standard TLB, 64 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 64 sets, 128 bytes per line
L1 d-cache: 64 ways of 2 sets, 128 bytes per line
L2 cache: disabled
Config1=0xfe3303da<COP2,PerfCount,WatchRegs,EJTAG>
Config2=0x80000167
Config3=0x1080
Physical memory chunk(s):
0x92e000 - 0x802dfff, 124780544 bytes (30464 pages)
0x8101000 - 0xff00fff, 132120576 bytes (32256 pages)
0x410000000 - 0x41fefffff, 267386880 bytes (65280 pages)
Maxmem is 0x41ff00000
pcpu is available at virtual address 0xc000000000000000.
Octeon SDK: Cavium Inc. OCTEON SDK version 2.3.0, build 427
Available Octeon features: SAAD CRYPTO USB
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-BETA2 #14 r303405M: Thu Jul 28 18:14:57 BST 2016
root@b:/usr/obj/mips.mips64/usr/src/sys/ERL mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0xffffffff80901c30.
real memory = 524288000 (512000K bytes)
Physical memory chunk(s):
0x00a4b000 - 0x0802dfff, 123613184 bytes (30179 pages)
0x08101000 - 0x0ff00fff, 132120576 bytes (32256 pages)
0x410000000 - 0x41f190fff, 253300736 bytes (61841 pages)
avail memory = 505479168 (482MB)
Create COP2 context zone
AP #1 started!
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
ULE: setup cpu 0
ULE: setup cpu 1
random: entropy device external interface
null: <full device, null device, zero device>
mem: <memory>
crypto: <crypto core>
nexus0: <MIPS32 root nexus>
random: harvesting attach, 8 bytes (4 bits) from nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 500000000 Hz quality 800
Event timer "MIPS32" frequency 500000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
rnd0: <Cavium Octeon Random Number Generator> on nexus0
random: harvesting attach, 8 bytes (4 bits) from rnd0
cryptocteon0: <Octeon Secure Coprocessor> on nexus0
crypto: assign cryptocteon0 driver id 0, flags 83886080
crypto: cryptocteon0 registers alg 6 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 7 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 1 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 2 flags 0 maxoplen 0
crypto: cryptocteon0 registers alg 11 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptocteon0
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 1, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
ciu0: <Cavium Octeon Central Interrupt Unit> on nexus0
obio0 on ciu0
uart1: <Octeon-16550 channel 1> on obio0
uart1: console (115200,n,8,1)
uart1: fast interrupt
uart1: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart1
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart0
random: harvesting attach, 8 bytes (4 bits) from obio0
octebus0: <Cavium Octeon Ethernet pseudo-bus> on ciu0
Interface 0 has 3 ports (RGMII)
Warning: Enabling IPD when IPD already enabled.
Warning: Enabling PKO when PKO already enabled.
octe0: <Cavium Octeon RGMII Ethernet> on octebus0
miibus0: <MII bus> on octe0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 7 on miibus0
atphy0: OUI 0x00c82e, model 0x0007, rev. 2
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from atphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
octe0: bpf attached
octe0: Ethernet address: dc:9f:db:29:a0:a7
random: harvesting attach, 8 bytes (4 bits) from octe0
octe1: <Cavium Octeon RGMII Ethernet> on octebus0
miibus1: <MII bus> on octe1
atphy1: <Atheros F1 10/100/1000 PHY> PHY 6 on miibus1
atphy1: OUI 0x00c82e, model 0x0007, rev. 2
atphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from atphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
octe1: bpf attached
octe1: Ethernet address: dc:9f:db:29:a0:a8
random: harvesting attach, 8 bytes (4 bits) from octe1
octe2: <Cavium Octeon RGMII Ethernet> on octebus0
miibus2: <MII bus> on octe2
atphy2: <Atheros F1 10/100/1000 PHY> PHY 5 on miibus2
atphy2: OUI 0x00c82e, model 0x0007, rev. 2
atphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from atphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
octe2: bpf attached
octe2: Ethernet address: dc:9f:db:29:a0:a9
random: harvesting attach, 8 bytes (4 bits) from octe2
random: harvesting attach, 8 bytes (4 bits) from octebus0
octusb0: <Cavium Octeon USB controller> on ciu0
usbus0 on octusb0
octusb0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from octusb0
gpio0: <Cavium Octeon GPIO driver> on ciu0
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [GIANT-LOCKED]
gpio0: [pin0] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin1] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin2] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin3] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin4] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin5] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin6] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin7] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin8] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin9] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin10] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin11] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin12] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin13] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin14] output=0, invinput=0, intr=0, intr_type=level
gpio0: [pin15] output=0, invinput=0, intr=0, intr_type=level
gpiobus0: <GPIO bus> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
random: harvesting attach, 8 bytes (4 bits) from gpio0
random: harvesting attach, 8 bytes (4 bits) from ciu0
Device configuration finished.
procfs registered
Timecounter "Octeon" frequency 500000000 Hz quality 900
Timecounters tick every 10.000 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
usbus0: 480Mbps High Speed USB v2.0
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 4096
SMP: AP CPU #1 launched.
Trying to mount root from ufs:/dev/ufs/root []...
Root mount waiting for: usbus0
ugen0.1: <Cavium Networks> at usbus0
uhub0: <Cavium Networks OCTUSB Root HUB, class 9/0, rev 2.00/1.00, addr 1>
on usbus0
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <Verbatim> at usbus0
umass0: <Verbatim STORE N GO, class 0/0, rev 2.00/11.00, addr 2> on usbus0
umass0:0:0: Attached to scbus0
random: harvesting attach, 8 bytes (4 bits) from umass0
(probe0:mountroot: waiting for device /dev/ufs/root...
umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <Verbatim STORE N GO 1100> Removable Direct Access SCSI device
pass0: Serial Number 9711080000013961
pass0: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Verbatim STORE N GO 1100> Removable Direct Access SCSI device
da0: Serial Number 9711080000013961
da0: 40.000MB/s transfers
da0: 3840MB (7864320 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
WARNING: / was not properly dismounted
WARNING: /: TRIM flag on fs but disk does not support TRIM
warning: no time-of-day clock registered, system time will not be set
accurately
start_init: trying /sbin/init
Setting hostuuid: 76ef854b-5405-11e6-82e6-dc9fdb29a0a7.
Setting hostid: 0x1064d44b.
Starting file system checks:
** SU+J Recovering /dev/ufs/root
** Reading 30638080 byte journal from inode 19473.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 17 journal records in 1024 bytes for 53.12% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.
***** FILE SYSTEM MARKED CLEAN *****
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/perl5/5.20/mach/CORE
random: unblocking device.
Setting hostname: erl-build1.
Setting up harvesting:
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTAC
H,CACHED
Feeding entropy: .
octe0: link state changed to DOWN
octe1: link state changed to DOWN
Starting Network: lo0 octe0 octe1 octe2.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
octe0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICASocte0: link
state changed to UP
T> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether dc:9f:db:29:a0:a7
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex,master>)
status: active
octe1: flags=8a43<UP,BROADCAST,RUNNINGocte1: link state changed to UP
,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether dc:9f:db:29:a0:a8
inet 10.99.1.1 netmask 0xfffffffc broadcast 10.99.1.3
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000bocte2: link state changed to DOWN
aseT <full-duplex,master>)
status: active
octe2: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether dc:9f:db:29:a0:a9
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
Starting Network: octe2.
octe2: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether dc:9f:db:29:a0:a9
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting dhclient.
DHCPREQUEST on octe0 to 255.255.255.255 port 67
DHCPACK from 172.21.88.254
bound to 172.21.88.17 -- renewal in 21600 seconds.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Starting iscsid.
Starting iscsictl.
iscsictl: /etc/iscsi.conf is world-readable
pass1 at iscsi1 bus 0 scbus1 target 0 lun 0
pass1: <FREEBSD CTLDISK 0001> Fixed Direct Access SPC-4 SCSI device
pass1: Serial Number MYSERIAL 2
pass1: 150.000MB/s transfers
pass1: Command Queueing enabled
GEOM: new disk da1
da1 at iscsi1 bus 0 scbus1 target 0 lun 0
da1: <FREEBSD CTLDISK 0001> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number MYSERIAL 2
da1: 150.000MB/s transfers
da1: Command Queueing enabled
da1: 307200MB (629145600 512 byte sectors)
da1: Delete methods: <NONE(*),ZERO>
Starting distccd.
Starting local daemons:** /dev/ufs/poudriere
USE JOURNAL? yes
** SU+J Recovering /dev/ufs/poudriere
** Reading 33554432 byte journal from inode 3.
RECOVER? yes
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
WRITE CHANGES? yes
** 32130 journal records in 1130496 bytes for 90.95% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.
***** FILE SYSTEM MARKED CLEAN *****
.
Updating motd:.
Mounting late filesystems:.
Starting ntpd.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Fri Jul 29 06:35:18 UTC 2016
FreeBSD/mips (erl-build1) (ttyu0)
login:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002401d1e966$0f79c6b0$2e6d5410$>