Date: Mon, 29 Aug 2016 12:07:34 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: Stanislav Galabov <sgalabov@gmail.com>, Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: sys/mips/mediatek kernel crash on RT3050 Message-ID: <125460.52837.qm@web101714.mail.ssk.yahoo.co.jp> In-Reply-To: <81B9B540-B1CB-406F-9F51-FDBDB451B4FC@gmail.com> References: <705503.18629.qm@web101707.mail.ssk.yahoo.co.jp> <CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ@mail.gmail.com> <81B9B540-B1CB-406F-9F51-FDBDB451B4FC@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi=0A=0AI build for BCM box at sys/mips/brodecom today.=0A=0AThis build hav= e same panic.=0A=0ACFE> boot -raw -z -addr=3D0x80001000 -max=3D0x3a0000 fla= sh0.os:=0ALoader:raw Filesys:raw Dev:flash0.os File: Options:(null)=0ALoadi= ng: ........... 3446116 bytes read=0AEntry at 0x80001000=0AClosing network.= =0AStarting program at 0x80001000=0Aentry: mips_init()=0ACache info:=0A=A0 = picache_stride=A0 =A0 =3D 4096=0A=A0 picache_loopcount =3D 4=0A=A0 pdcache_= stride=A0 =A0 =3D 4096=0A=A0 pdcache_loopcount =3D 4=0Acpu0: Broadcom proce= ssor v41.144=0A=A0 MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M= 64M 256M pg sizes)=0A=A0 L1 i-cache: 4 ways of 256 sets, 16 bytes per line= =0A=A0 L1 d-cache: 2 ways of 512 sets, 16 bytes per line=0A=A0 L2 cache: di= sabled=0A=A0 Config1=3D0x3e9b6c86<MIPS16,EJTAG>=0AKDB: debugger backends: d= db=0AKDB: current backend: ddb=0ACopyright (c) 1992-2016 The FreeBSD Projec= t.=0ACopyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 19= 94=0A=A0 =A0 =A0 =A0 The Regents of the University of California. All right= s reserved.=0AFreeBSD is a registered trademark of The FreeBSD Foundation.= =0AFreeBSD 12.0-CURRENT #3 7c2f7cf(zrouter)-dirty: Mon Aug 29 11:41:45 JST = 2016=0A=A0 =A0 hiroki@microserver:/storage/home/hiroki/obj/storage/home/hir= oki/zrouter/tmp/=0Amips.mipsel/storage/home/hiroki/freebsd/sys/Buffalo_WHR-= HP-G54 mips=0Agcc version 4.2.1 20070831 patched [FreeBSD]=0Areal memory=A0= =3D 16125952 (15748K bytes)=0Aavail memory =3D 11137024 (10MB)=0Anexus0: <= MIPS32 root nexus>=0Abhnd0: <BCM5354 SIBA bus> at mem 0x18000000-0x180fffff= on nexus0=0Abhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 20> mem = 0x18000000-0x18000=0Adff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a00= 0000-0x1bffffff at core 0=A0=0Aon bhnd0=0Abhnd_mips0: <Broadcom MIPS3302 Co= re, rev 8> mem 0x18002000-0x18002dff at core 2=A0=0Aon bhnd0=0Acpupic0: <MI= PS32 Interrupt Controller> on nexus0=0Abhnd_pmu0: <Broadcom ChipCommon PMU,= rev 0> on bhnd_chipc0=0Abhnd0: error reading BOARDVENDOR: 19=0Abhnd_pmu0: = error fetching board info: 19=0Adevice_attach: bhnd_pmu0 attach returned 6= =0Anvram2env0: Found NVRAM at 0x1fc00400=0Anvram2env0: <NVRAM to ENV pseudo= -device> on nexus0=0Anvram2env0: sig =3D 0x48534c46=0Anvram2env0: size =3D = 0x2f0=0Anvram2env1: Found NVRAM at 0x1c7f8000=0Anvram2env1: <NVRAM to ENV p= seudo-device> on nexus0=0Anvram2env1: sig =3D 0x48534c46=0Anvram2env1: size= =3D 0x344=0Aclock0: <Generic MIPS32 ticker> on nexus0=0Apanic: Unable to a= dd hard IRQ 7 handler=0AKDB: enter: panic=0A[ thread pid 0 tid 100000 ]=0AS= topped at=A0 =A0 =A0 kdb_enter+0x4c: lui =A0 =A0 at,0x8036=0A=0A=0A----- Or= iginal Message -----=0A> From: Stanislav Galabov <sgalabov@gmail.com>=0A> T= o: Adrian Chadd <adrian.chadd@gmail.com>=0A> Cc: Mori Hiroki <yamori813@yah= oo.co.jp>; "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>=0A> Date: = 2016/8/26, Fri 01:31=0A> Subject: Re: sys/mips/mediatek kernel crash on RT3= 050=0A> =0A> Hi all,=0A> =0A> I am currently on vacation and will be back n= ext week. I guess I'll find =0A> some time to look at this then if needed.= =0A> =0A> Best wishes,=0A> Stanislav=0A> =0A>> On Aug 25, 2016, at 18:25, = Adrian Chadd <adrian.chadd@gmail.com> =0A> wrote:=0A>> =0A>> Hm, does it r= equire INTRNG these days?=0A>> =0A>> =0A>> -a=0A>> =0A>> =0A>>> On 24 Aug= ust 2016 at 18:11, Mori Hiroki <yamori813@yahoo.co.jp> =0A> wrote:=0A>>> H= i=0A>>> =0A>>> I build sys/mips/mediatek for RT3050 box at few days before= head.=0A>>> =0A>>> This kernel crash.=0A>>> =0A>>> This build based on r= t3050.dtsi.=0A>>> =0A>>> Some one know this problem ?=0A>>> =0A>>> Thanks= .=0A>>> =0A>>> Starting kernel ...=0A>>> =0A>>> FDT DTB=A0 at: 0x802ce6f0= =0A>>> CPU=A0 clock:=A0 320MHz=0A>>> Timer clock:=A0 160MHz=0A>>> UART= =A0 clock:=A0 106MHz=0A>>> =0A>>> U-Boot args (from 0 args):=0A>>> =A0 =A0= =A0 =A0 None=0A>>> Environment:=0A>>> entry: mips_init()=0A>>> RAM size= : 32MB (assumed)=0A>>> Cache info:=0A>>> =A0 picache_stride=A0 =A0 =3D 409= 6=0A>>> =A0 picache_loopcount =3D 8=0A>>> =A0 pdcache_stride=A0 =A0 =3D 409= 6=0A>>> =A0 pdcache_loopcount =3D 4=0A>>> cpu0: MIPS Technologies processo= r v76.150=0A>>> =A0 MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 6= 4M 256M pg =0A> sizes)=0A>>> =A0 L1 i-cache: 4 ways of 256 sets, 32 bytes p= er line=0A>>> =A0 L1 d-cache: 4 ways of 128 sets, 32 bytes per line=0A>>> = =A0 L2 cache: disabled=0A>>> =A0 Config1=3D0xbea3319e<PerfCount,WatchRegs,M= IPS16,EJTAG>=0A>>> =A0 Config2=3D0x80000000=0A>>> =A0 Config3=3D0x420=0A>>>= Physical memory chunk(s):=0A>>> 0x334000 - 0x1ffffff, 30195712 bytes (73= 72 pages)=0A>>> Maxmem is 0x2000000=0A>>> Copyright (c) 1992-2016 The Fre= eBSD Project.=0A>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991= , 1992, 1993, =0A> 1994=0A>>> =A0 =A0 =A0 =A0 The Regents of the University= of California. All rights =0A> reserved.=0A>>> FreeBSD is a registered tr= ademark of The FreeBSD Foundation.=0A>>> FreeBSD 12.0-CURRENT #1 ed1832a(z= router): Sun Aug 21 12:19:54 JST 2016=0A>>> =A0 =A0 =0A> hiroki@microserver= :/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/=0A>>> mips.mips= el/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT mips=0A>>> gcc version= 4.2.1 20070831 patched [FreeBSD]=0A>>> Preloaded elf kernel "kernel" at 0= x8032afb0.=0A>>> real memory=A0 =3D 33554432 (32768K bytes)=0A>>> Physica= l memory chunk(s):=0A>>> 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pag= es)=0A>>> avail memory =3D 28397568 (27MB)=0A>>> ULE: setup cpu 0=0A>>> = random: entropy device external interface=0A>>> firmware: 'rt2860fw' versi= on 0: 8192 bytes loaded at 0x802d86d0=0A>>> firmware: 'rt2561fw' version 0= : 8192 bytes loaded at 0x802d2550=0A>>> firmware: 'rt2561sfw' version 0: 8= 192 bytes loaded at =0A> 0x802d45d0=0A>>> wlan: <802.11 Link Layer>=0A>>> = firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x802d6650=0A>>> nul= l: <full device, null device, zero device>=0A>>> openfirm: <Open Firmware = control device>=0A>>> mem: <memory>=0A>>> nexus0: <MIPS32 root nexus>=0A>= >> random: harvesting attach, 8 bytes (4 bits) from nexus0=0A>>> ofwbus0:= <Open Firmware Device Tree> on nexus0=0A>>> palmbus0: <MTK Palmbus> mem 0= x10000000-0x101fffff on ofwbus0=0A>>> random: harvesting attach, 8 bytes (= 4 bits) from palmbus0=0A>>> random: harvesting attach, 8 bytes (4 bits) fr= om ofwbus0=0A>>> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0=0A>>> = random: harvesting attach, 8 bytes (4 bits) from cpupic0=0A>>> sysc0: <MTK= System Controller> mem 0-0xff on palmbus0=0A>>> random: harvesting attach= , 8 bytes (4 bits) from sysc0=0A>>> pinctrl0: <MTK Pin Controller> on ofwb= us0=0A>>> pinctrl0: GPIO mode start: 0x0000029d=0A>>> Processing 1 pin-co= nfig node(s) in pinctrl-0 for spi@b00=0A>>> Processing 1 pin-config node(s= ) in pinctrl-0 for uartlite@c00=0A>>> Processing 1 pin-config node(s) in p= inctrl-0 for pinctrl=0A>>> pinctrl0: GPIO mode end=A0 : 0x0000005d=0A>>> = random: harvesting attach, 8 bytes (4 bits) from pinctrl0=0A>>> rstctrl0: = <MTK Reset Controller> on ofwbus0=0A>>> random: harvesting attach, 8 bytes= (4 bits) from rstctrl0=0A>>> clkctrl0: <MTK Clock Controller> on ofwbus0= =0A>>> random: harvesting attach, 8 bytes (4 bits) from clkctrl0=0A>>> in= tc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on =0A> palmbus0= =0A>>> random: harvesting attach, 8 bytes (4 bits) from intc0=0A>>> gpio0= : <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on =0A> palmbus0=0A>>> = gpiobus0: <OFW GPIO bus> on gpio0=0A>>> random: harvesting attach, 8 bytes= (4 bits) from gpiobus0=0A>>> random: harvesting attach, 8 bytes (4 bits) = from gpio0=0A>>> palmbus0: <timer@100> mem 0x100-0x11f irq 4 compat =0A> r= alink,rt3050-timer (no drive=0A>>> r attached)=0A>>> palmbus0: <watchdog@= 120> mem 0x120-0x12f irq 5 compat =0A> ralink,rt3050-wdt (no driv=0A>>> er= attached)=0A>>> palmbus0: <memc@300> mem 0x300-0x3ff irq 7 compat =0A> ra= link,rt3050-memc (no driver=0A>>> attached)=0A>>> palmbus0: <uart@500> me= m 0x500-0x5ff irq 8 disabled compat =0A> ralink,rt3050-uart (n=0A>>> o dri= ver attached)=0A>>> gpioled0: <GPIO led> at pin 14 on gpiobus0=0A>>> rand= om: harvesting attach, 8 bytes (4 bits) from gpioled0=0A>>> gpioled1: <GPI= O led> at pin 11 on gpiobus0=0A>>> random: harvesting attach, 8 bytes (4 b= its) from gpioled1=0A>>> gpioled2: <GPIO led> at pin 9 on gpiobus0=0A>>> = random: harvesting attach, 8 bytes (4 bits) from gpioled2=0A>>> gpioled3: = <GPIO led> at pin 12 on gpiobus0=0A>>> random: harvesting attach, 8 bytes = (4 bits) from gpioled3=0A>>> gpioc0: <GPIO controller> on gpio0=0A>>> ran= dom: harvesting attach, 8 bytes (4 bits) from gpioc0=0A>>> palmbus0: <gpio= @638> mem 0x638-0x65b disabled compat =0A> ralink,rt3050-gpio (no driv=0A>>= > er attached)=0A>>> palmbus0: <gpio@660> mem 0x660-0x683 disabled compat= =0A> ralink,rt3050-gpio (no driv=0A>>> er attached)=0A>>> spi0: <MTK SPI= Controller (v1)> mem 0xb00-0xbff on palmbus0=0A>>> spibus0: <OFW SPI bus>= on spi0=0A>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0=0A>= >> mx25l0: mx25ll64, sector 65536 bytes, 128 sectors=0A>>> random: harves= ting attach, 8 bytes (4 bits) from mx25l0=0A>>> random: harvesting attach,= 8 bytes (4 bits) from spibus0=0A>>> random: harvesting attach, 8 bytes (4= bits) from spi0=0A>>> uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10= on palmbus0=0A>>> uart0: console (57971,n,8,1)=0A>>> uart0: fast interru= pt=0A>>> uart0: PPS capture mode: DCDinvalid=0A>>> random: harvesting att= ach, 8 bytes (4 bits) from uart0=0A>>> ofwbus0: <usbphy> compat ralink,rt3= 050-usbphy (no driver =0A> attached)=0A>>> rt0: <Ralink RT3050 onChip Ethe= rnet driver> mem =0A> 0x10100000-0x1010ffff irq 0 on o=0A>>> fwbus0=0A>>> = rt0: RT305XF Ethernet MAC (rev 0x00000000)=0A>>> rt0: use hardcoded 00:18= :e7:d5:83:90 macaddr=0A>>> rt0: bpf attached=0A>>> rt0: Ethernet address:= 00:18:e7:d5:83:90=0A>>> random: harvesting attach, 8 bytes (4 bits) from = rt0=0A>>> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 = =0A> on ofwbus0=0A>>> miibus0: <MII bus> on mtkswitch0=0A>>> ukphy0: <Gen= eric IEEE 802.3u media interface> PHY 0 on miibus0=0A>>> ukphy0: OUI 0x000= c43, model 0x0001, rev. 7=0A>>> ukphy0:=A0 none, 10baseT, 10baseT-FDX, 100= baseTX, 100baseTX-FDX, auto=0A>>> random: harvesting attach, 8 bytes (4 bi= ts) from ukphy0=0A>>> random: harvesting attach, 8 bytes (4 bits) from mii= bus0=0A>>> miibus1: <MII bus> on mtkswitch0=0A>>> ukphy1: <Generic IEEE 8= 02.3u media interface> PHY 1 on miibus1=0A>>> ukphy1: OUI 0x000c43, model = 0x0001, rev. 7=0A>>> ukphy1:=A0 none, 10baseT, 10baseT-FDX, 100baseTX, 100= baseTX-FDX, auto=0A>>> random: harvesting attach, 8 bytes (4 bits) from uk= phy1=0A>>> random: harvesting attach, 8 bytes (4 bits) from miibus1=0A>>> = miibus2: <MII bus> on mtkswitch0=0A>>> ukphy2: <Generic IEEE 802.3u media= interface> PHY 2 on miibus2=0A>>> ukphy2: OUI 0x000c43, model 0x0001, rev= . 7=0A>>> ukphy2:=A0 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,= auto=0A>>> random: harvesting attach, 8 bytes (4 bits) from ukphy2=0A>>> = random: harvesting attach, 8 bytes (4 bits) from miibus2=0A>>> miibus3: <= MII bus> on mtkswitch0=0A>>> ukphy3: <Generic IEEE 802.3u media interface>= PHY 3 on miibus3=0A>>> ukphy3: OUI 0x000c43, model 0x0001, rev. 7=0A>>> = ukphy3:=A0 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A>>>= random: harvesting attach, 8 bytes (4 bits) from ukphy3=0A>>> random: ha= rvesting attach, 8 bytes (4 bits) from miibus3=0A>>> miibus4: <MII bus> on= mtkswitch0=0A>>> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on m= iibus4=0A>>> ukphy4: OUI 0x000c43, model 0x0001, rev. 7=0A>>> ukphy4:=A0 = none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A>>> random: h= arvesting attach, 8 bytes (4 bits) from ukphy4=0A>>> random: harvesting at= tach, 8 bytes (4 bits) from miibus4=0A>>> etherswitch0: <Switch controller= > on mtkswitch0=0A>>> random: harvesting attach, 8 bytes (4 bits) from eth= erswitch0=0A>>> mdio0: <MDIO> on mtkswitch0=0A>>> random: harvesting atta= ch, 8 bytes (4 bits) from mdio0=0A>>> random: harvesting attach, 8 bytes (= 4 bits) from mtkswitch0=0A>>> ofwbus0: <wmac@10180000> mem 0x10180000-0x10= 1bffff irq 2 compat =0A> ralink,rt3050-wm=0A>>> ac (no driver attached)=0A= >>> ofwbus0: <otg@101c0000> mem 0x101c0000-0x101fffff irq 3 disabled =0A> = compat ralink,r=0A>>> t3050-otg (no driver attached)=0A>>> ofwbus0: <gpio= -leds> compat gpio-leds (no driver attached)=0A>>> ofwbus0: <gpio-keys-pol= led> compat gpio-keys-polled (no driver =0A> attached)=0A>>> clock0: <Gene= ric MIPS32 ticker> on nexus0=0A>>> panic: Unable to add hard IRQ 7 handler= =0A>>> Uptime: 1s=0A>>> Automatic reboot in 15 seconds - press a key on t= he console to abort=0A>>> Rebooting...=0A>>> ____________________________= ___________________=0A>>> freebsd-mips@freebsd.org mailing list=0A>>> htt= ps://lists.freebsd.org/mailman/listinfo/freebsd-mips=0A>>> To unsubscribe,= send any mail to =0A> "freebsd-mips-unsubscribe@freebsd.org"=0A>> _______= ________________________________________=0A>> freebsd-mips@freebsd.org mai= ling list=0A>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips=0A>= > To unsubscribe, send any mail to =0A> "freebsd-mips-unsubscribe@freebsd.= org"=0A>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?125460.52837.qm>