From owner-freebsd-wireless@freebsd.org Sun May 28 21:00:29 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id F06D1D86F43 for ; Sun, 28 May 2017 21:00:29 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id E73AE18C4 for ; Sun, 28 May 2017 21:00:29 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id v4SL015Z035962 for ; Sun, 28 May 2017 21:00:29 GMT (envelope-from bugzilla-noreply@FreeBSD.org) Message-Id: <201705282100.v4SL015Z035962@kenobi.freebsd.org> From: bugzilla-noreply@FreeBSD.org To: freebsd-wireless@FreeBSD.org Subject: Problem reports for freebsd-wireless@FreeBSD.org that need special attention Date: Sun, 28 May 2017 21:00:29 +0000 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2017 21:00:30 -0000 To view an individual PR, use: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=(Bug Id). The following is a listing of current problems submitted by FreeBSD users, which need special attention. These represent problem reports covering all versions including experimental development code and obsolete releases. Status | Bug Id | Description ------------+-----------+--------------------------------------------------- New | 206801 | iwn(4) page fault on netif restart Open | 154598 | [ath] Atheros 5424/2424 can't connect to WPA netw Open | 163312 | [panic] [ath] kernel panic: page fault with ath0 Open | 166190 | [ath] TX hangs and frames stuck in TX queue Open | 166357 | [ath] 802.11n TX stall when the first frame in th Open | 169362 | [ath] AR5416: radar pulse PHY errors sometimes in Open | 169433 | [iwn] iwn(4) doesn't support 6235 chip. Open | 211689 | panic with lagg failover wireless ath and iwm 8 problems total for which you should take action. From owner-freebsd-wireless@freebsd.org Mon May 29 06:11:43 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 7121CD86C48 for ; Mon, 29 May 2017 06:11:43 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: from mail-oi0-x230.google.com (mail-oi0-x230.google.com [IPv6:2607:f8b0:4003:c06::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 475E21984 for ; Mon, 29 May 2017 06:11:43 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: by mail-oi0-x230.google.com with SMTP id l18so67997592oig.2 for ; Sun, 28 May 2017 23:11:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to; bh=GLvBwUO0Y38zJqJtTvF79+y61zVZMMLpB+giP4OZmvA=; b=ptoNQd7+V9Hsu5N+ElOQf8X6o1SjqTbqLGM2K2pshKdwTRfzuzWRQh7oWinxIP+opk BzONFYseW08c3PEXw3w2Ux13jJRXgqGH/V1zg2LMq97+L07JAXiW+HLMqYnmWpXY+HHp 6bYPIkDOJin/XzWYX9nqPr1+uH6ZI62ZwJLmyoZ11I9xCCPiHiFgI7sXjJPb7DnAb54A 42YKg6Rgv3xCQS69SzjR7AjKTLTwcenDOU5+mB+/W59mxPN/gN44nQcGLBRaf6PiqBwr oUgb/au57t077/QO9Rvwml/0k7RbmtLu+iR0Lnr3lvRKdld5Ebsm7eZ2TDBVVHg0DE+N D7RA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to; bh=GLvBwUO0Y38zJqJtTvF79+y61zVZMMLpB+giP4OZmvA=; b=tjikloE5vzlHICmYirV4Ah+DFFzJiMgqBNKhOgOD32LhPOxVzwSmXX+bIKJiD5Ymln pze4gu9YfRl6YTuKQajedAD0TevtFWD7YYZbkImOgPe56px8ANb3xIUOzQUId2btZcE1 YeIMBGqfgws+roRq4dBjqnQmG0eTRANmF0unFHmp3aIddUaPdgyLhM2fjvfgjsTn75Ni ydobUom8zllDIvBWa7O/Z5fX31E3lX3ATSXDHoQ5tyTaRQb8r5rkmUq9Yy42xTfnLct4 GbVbGA4Yql0vf63HwN3EB++SGGAU0+0oZ4N7bkhq6txBWl7U0QBHM7MF4j6erj0HRg55 /ViQ== X-Gm-Message-State: AODbwcBi51mL29k/4ZJJ4DSDut5CcJW6mzY4mNQWaXkGZ6MtzSm8xnqG naPPTeaxKEFNQaI+Jf9Mm2QasD7fiA== X-Received: by 10.202.56.212 with SMTP id f203mr6018516oia.146.1496038302473; Sun, 28 May 2017 23:11:42 -0700 (PDT) MIME-Version: 1.0 Received: by 10.157.21.104 with HTTP; Sun, 28 May 2017 23:11:41 -0700 (PDT) Received: by 10.157.21.104 with HTTP; Sun, 28 May 2017 23:11:41 -0700 (PDT) In-Reply-To: References: From: Pietro Sammarco Date: Mon, 29 May 2017 01:11:41 -0500 Message-ID: Subject: No IEEE80211N in HOSTAPD 11-Release To: freebsd-wireless@freebsd.org Content-Type: text/plain; charset="UTF-8" X-Content-Filtered-By: Mailman/MimeDel 2.1.23 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2017 06:11:43 -0000 Hello folks. I recently bought a APU2C4 for the solely purpose to have it as a all in one FreeBSD router, firewall, HOSTAPD. It has got two mini PCIe Compex WLE200NX, which uses the Atheros AR9280 chipset. ath0: mem 0xfe400000-0xfe40ffff at device 0.0 on pci1 ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 However though, I am running into a sort of nightmare with getting 802.11n to work with hostapd. Line 6: unknown configuration item 'ieee80211n' I could be totally wrong, but from what I understood IEEE80211N is disabled both from the hostapd binary included with system base(I am on FreeBSD 11-relese p9), as well as from the one in ports/pkg. Does this mean that I won't be getting no 802.11n love? If so, is there any reason of why 802.11n has been disabled from hostapd? If this turns out to be true, I honestly don't know whether is worth to venture compiling hostapd from source or rather going with pfsense, since they got it patched some 3 years ago. I appreciate your help. Thanks, Pietro From owner-freebsd-wireless@freebsd.org Mon May 29 06:38:28 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 00EF9CB904B for ; Mon, 29 May 2017 06:38:28 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-wm0-x230.google.com (mail-wm0-x230.google.com [IPv6:2a00:1450:400c:c09::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 8BD7112EE for ; Mon, 29 May 2017 06:38:27 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by mail-wm0-x230.google.com with SMTP id e127so45407779wmg.1 for ; Sun, 28 May 2017 23:38:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc; bh=7Mj6R1Ucv8rvVxPD/LdTZtH8GEAmJkeHDS+v0+15BdU=; b=m3HYggzqrVhkNwe/MEWUKzBiN5HA0bJOs9uM3RHUw6IiAovDoc3SYdOcEUNe5A5xoU arKzN+Gc7epB5Rtbvzerey7XCmxgtSlVUKHKcz7k7AfapPjvjc8Hadj0NFZ/mHw4So/R dy33l1xia7VDx7rrSxpHrY+FRRPjROh9dS1w6hN7JzoxLYtDes+iUL1LpkGM1+h7TB/H oinf8cplHMZsCLL+1Pbg5DNo3HGll1MJWhd5iykct9KVcxlGYjiQ/go8CQ4xDqJaL+pW 1sQLPLPSE6cQ0uIe9SqYTXO85HEuTjY0tf8qHxLYoC8/PB3CPJwvWRJmWDcjC8jRk9No MkRw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc; bh=7Mj6R1Ucv8rvVxPD/LdTZtH8GEAmJkeHDS+v0+15BdU=; b=bJTH5Qo1gE6egX29lfClygszHiSkuIwQMFmDvP30T0U+xQAwG++3jbrnmr6Yq25Pvm v2dVfMo8a7MEDCbwQfd97RlLh2cArhSC78VOYniC6gcbRNGI+NnST+px3/1a5zZxscuZ IoQxlrGBgeg1d00iyrldEe3oMK45lBc5OWdEyHVXa4Qzciot0VbjZKXUn/aqeFjZwoa/ XHVlOgwO98m5+C+agY8Ah1FoEBuybsSCADeaN4j1Z0nMGgpDA2rolDTzmFElOK724HSV Ao1Ytzf+SDeMcYMHTTHtI6DwAy1KtksMbp+z/mKQwukl9JwtMUR0cbz7aZps4sfskG4I jwLQ== X-Gm-Message-State: AODbwcBzKLU8t4aN6F++po2y5+HwmSiGmyk4t3zZCWTg5v6tNXu4Dlmb TQCcJ0vHN6/kSIohi27hXwFkkOVU6g== X-Received: by 10.28.50.65 with SMTP id y62mr3885648wmy.5.1496039906010; Sun, 28 May 2017 23:38:26 -0700 (PDT) MIME-Version: 1.0 Received: by 10.28.193.134 with HTTP; Sun, 28 May 2017 23:38:25 -0700 (PDT) In-Reply-To: References: From: Adrian Chadd Date: Sun, 28 May 2017 23:38:25 -0700 Message-ID: Subject: Re: No IEEE80211N in HOSTAPD 11-Release To: Pietro Sammarco Cc: "freebsd-wireless@freebsd.org" Content-Type: text/plain; charset="UTF-8" X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2017 06:38:28 -0000 hi, the TL;DR is - we do support 11n, it's just done in net80211. So no, you don't need to tell hostapd anything special about it for now. -a On 28 May 2017 at 23:11, Pietro Sammarco via freebsd-wireless wrote: > Hello folks. I recently bought a APU2C4 for the solely purpose to have it > as a all in one FreeBSD router, firewall, HOSTAPD. > > It has got two mini PCIe Compex WLE200NX, which uses the Atheros AR9280 > chipset. > > ath0: mem 0xfe400000-0xfe40ffff at device 0.0 on pci1 > ath0: [HT] enabling HT modes > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > However though, I am running into a sort of nightmare with getting 802.11n > to work with hostapd. > > Line 6: unknown configuration item 'ieee80211n' > > I could be totally wrong, but from what I understood IEEE80211N is disabled > both from the hostapd binary included with system base(I am on FreeBSD > 11-relese p9), as well as from the one in ports/pkg. > > Does this mean that I won't be getting no 802.11n love? > > If so, is there any reason of why 802.11n has been disabled from hostapd? > > If this turns out to be true, I honestly don't know whether is worth to > venture compiling hostapd from source or rather going with pfsense, since > they got it patched some 3 years ago. > > I appreciate your help. > > Thanks, > Pietro > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" From owner-freebsd-wireless@freebsd.org Mon May 29 16:05:02 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3C650D77333 for ; Mon, 29 May 2017 16:05:02 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: from mail-wm0-x22f.google.com (mail-wm0-x22f.google.com [IPv6:2a00:1450:400c:c09::22f]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id C4ACD803D3 for ; Mon, 29 May 2017 16:05:01 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: by mail-wm0-x22f.google.com with SMTP id 7so61206083wmo.1 for ; Mon, 29 May 2017 09:05:01 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=subject:to:cc:references:from:message-id:date:user-agent :mime-version:in-reply-to:content-transfer-encoding:content-language; bh=WwHkGUFJmEVxPK1uMl/tPgg8VMiJZe+TUYMD1oQ/ORQ=; b=hwkRZseCi9nAk+ZW8ee0yAzLDlsM6j1Txfi3xnyHXMapOfTAjWGdEmIvnJkD7x8UoY FW09dtifrMbkPj9yqoLMGajp7m64OSnGkGAbqdqfv8jA/udV5c4sK0kKcRlRMq83apl9 KYddeZWbAXzvyp2Y7az/W3BAItgHmeEo1bBVowWrgn1s5+PVQmQUXHQmEpiCq6tJjkWB VGSFoKgVzNonP/4g2E4rP56dVwAb5WI6IRzN/kdfzbSnfpLCsAqSbJxd7ljfe/TPIrl5 sbVKg1CNH5IPS55b0O1YVQQx37Vzf16538ACZNxUEYoQ7ooM8uAvVB63Us3pEMrkLUL9 rsHg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:cc:references:from:message-id:date :user-agent:mime-version:in-reply-to:content-transfer-encoding :content-language; bh=WwHkGUFJmEVxPK1uMl/tPgg8VMiJZe+TUYMD1oQ/ORQ=; b=lG3t9YMGzcvgR49cM2ggw2zPbKNRDhhUnf/HEc8i99E2xacye6xo6jccardhJSIlE6 1MRIqlIjEzhfQkBMN0AKCMa5Jqznj5933ahBByTgHKOEHa5qn8HKFZKmtlQJnzHUwrmG pbzk1GCUcYWQnhLUgz7ZaQIpq4Ir2m0ZBQix2ybC4gZOHm74VYrvgYyx2yYDoOlwDV0x huWwHioQ0j/XSYdsARaQf//DfPrym814EboL++Uqpjfmexra3EMrbzYk8o2ao2weOQTK Ojohb8GEtm/pW8T2rNJIHOoBb+akKvza7bdfQXz01yzIPIitKtRycoijjsSvwVT/St9C 7Acg== X-Gm-Message-State: AODbwcDQFelyiTtfQtmyn74UPWDNHlo/6Xo8nboCs7SmTztEWh5gRT0V O5A1tDlhW9zgTIGSD5I= X-Received: by 10.28.238.67 with SMTP id m64mr21172677wmh.57.1496073899539; Mon, 29 May 2017 09:04:59 -0700 (PDT) Received: from [192.168.1.195] ([189.216.190.74]) by smtp.gmail.com with ESMTPSA id y17sm9370514wrb.39.2017.05.29.09.04.57 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 29 May 2017 09:04:58 -0700 (PDT) Subject: Re: No IEEE80211N in HOSTAPD 11-Release To: Adrian Chadd Cc: "freebsd-wireless@freebsd.org" References: From: Pietro Sammarco Message-ID: Date: Mon, 29 May 2017 11:04:56 -0500 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Content-Language: en-US X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2017 16:05:02 -0000 Hey Adrian. Thank you so much for clarifying this. It honestly felt way to strange that FreeBSD didn't support HOSTAPD 802.11n. Best Regards, Pietro Sammarco On 05/29/2017 01:38 AM, Adrian Chadd wrote: > hi, > > the TL;DR is - we do support 11n, it's just done in net80211. So no, > you don't need to tell hostapd anything special about it for now. > > > -a > > On 28 May 2017 at 23:11, Pietro Sammarco via freebsd-wireless > wrote: >> Hello folks. I recently bought a APU2C4 for the solely purpose to have it >> as a all in one FreeBSD router, firewall, HOSTAPD. >> >> It has got two mini PCIe Compex WLE200NX, which uses the Atheros AR9280 >> chipset. >> >> ath0: mem 0xfe400000-0xfe40ffff at device 0.0 on pci1 >> ath0: [HT] enabling HT modes >> ath0: [HT] 1 stream STBC receive enabled >> ath0: [HT] 1 stream STBC transmit enabled >> ath0: [HT] 2 RX streams; 2 TX streams >> ath0: AR9280 mac 128.2 RF5133 phy 13.0 >> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 >> >> However though, I am running into a sort of nightmare with getting 802.11n >> to work with hostapd. >> >> Line 6: unknown configuration item 'ieee80211n' >> >> I could be totally wrong, but from what I understood IEEE80211N is disabled >> both from the hostapd binary included with system base(I am on FreeBSD >> 11-relese p9), as well as from the one in ports/pkg. >> >> Does this mean that I won't be getting no 802.11n love? >> >> If so, is there any reason of why 802.11n has been disabled from hostapd? >> >> If this turns out to be true, I honestly don't know whether is worth to >> venture compiling hostapd from source or rather going with pfsense, since >> they got it patched some 3 years ago. >> >> I appreciate your help. >> >> Thanks, >> Pietro >> _______________________________________________ >> freebsd-wireless@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" From owner-freebsd-wireless@freebsd.org Wed May 31 12:09:23 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 8668DAFF3ED for ; Wed, 31 May 2017 12:09:23 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 7454375E46 for ; Wed, 31 May 2017 12:09:23 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id v4VC9NGj037787 for ; Wed, 31 May 2017 12:09:23 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 219683] Since r318216 iwm firmware loading aborts with "unknown firmware section 512" Date: Wed, 31 May 2017 12:09:23 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: new X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: iz-rpi03@hs-karlsruhe.de X-Bugzilla-Status: New X-Bugzilla-Resolution: X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_id short_desc product version rep_platform op_sys bug_status bug_severity priority component assigned_to reporter Message-ID: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2017 12:09:23 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D219683 Bug ID: 219683 Summary: Since r318216 iwm firmware loading aborts with "unknown firmware section 512" Product: Base System Version: CURRENT Hardware: i386 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: wireless Assignee: freebsd-wireless@FreeBSD.org Reporter: iz-rpi03@hs-karlsruhe.de After changing the wireless card in a laptop running 32 bit FreeBSD 12.0 in= to a Intel 7260 I get a firmware loading error. The kernel messages are # kldload if_iwm iwm0: mem 0xf69fe000-0xf69fffff irq 1= 7 at device 0.0 on pci1 iwm0: iwm_read_firmware: unknown firmware section 512, abort iwm0: firmware parse error 22, section type 512 iwm0: iwm_read_firmware: failed 22 iwm0: Failed to start INIT ucode: 22 # Using the older, 16th, version of the firmware causes the same error messag= e. So I think it is not firmware version related. Going back to r318215 fixes the firmware loading, while with r318216 the er= ror shows up. The r318216 log message is related to iwm's firmware handling: [iwm] Sync iwm_read_firmware()'s loop to iwlwifi's code. Obtained from: dragonflybsd.git d1c10ccfcf2d6d2a664f17197add0b4f93333181 Regards Ralf --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Wed May 31 17:57:34 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B8CA7B7FD78 for ; Wed, 31 May 2017 17:57:34 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A6A2022E0 for ; Wed, 31 May 2017 17:57:34 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id v4VHvYhO099924 for ; Wed, 31 May 2017 17:57:34 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 219683] Since r318216 iwm firmware loading aborts with "unknown firmware section 512" Date: Wed, 31 May 2017 17:57:34 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: CURRENT X-Bugzilla-Keywords: regression X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: linimon@FreeBSD.org X-Bugzilla-Status: New X-Bugzilla-Resolution: X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: adrian@freebsd.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: keywords assigned_to Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2017 17:57:34 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D219683 Mark Linimon changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |regression Assignee|freebsd-wireless@FreeBSD.or |adrian@freebsd.org |g | --- Comment #1 from Mark Linimon --- Over to committer of r318215. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jun 3 02:35:49 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 89BE7B7B5C3 for ; Sat, 3 Jun 2017 02:35:49 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: from mail-wm0-x243.google.com (mail-wm0-x243.google.com [IPv6:2a00:1450:400c:c09::243]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id DF4777FADE for ; Sat, 3 Jun 2017 02:35:48 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: by mail-wm0-x243.google.com with SMTP id b84so21463651wmh.0 for ; Fri, 02 Jun 2017 19:35:48 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=from:to:cc:subject:message-id:date:user-agent:mime-version :content-language; bh=BSTCMg2UwfoRSN+uRb8ceP/szxRI8XEyi2tWvSvRZGA=; b=rtV2ZeRachVpVjG1MZx7CtKl1O3IIZ9dEtU0oi0wtoz3OUkgzRsWX2HrKWqoHK3xde MUawuvgy9XtA9C4KDK7Md5mQO1t5X8VQAQOWiUk5iXZmN3A6POFYd7SQ1vA7uO+Y1Bfv HD2PcCfSV+Jl5zmL+w8670ab3Ysnni6TZAjHwiwLM+v17ky4lGcZOizFBxaIIvwHKmL7 BrjotHNKjI/9TJQ706W4ED1XD0IuY2ToK7FixyOR0VP+wVpILKQo0P2QGaESix/pqPky uYhgOKyZPm9QLJ6BH7HV9TMsBVraUncFyjdPJZN703+eHKysfuCibN8AASxxJ/UtLiEo JzEQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:message-id:date:user-agent :mime-version:content-language; bh=BSTCMg2UwfoRSN+uRb8ceP/szxRI8XEyi2tWvSvRZGA=; b=tjX/2bixdeJ/1Zigc3dKbORnUMaJEmnWmvgQdGP3JMuisE5f3Ii49xubcwW45hHsfe TLcFFCG9QVRaNatriOKmmXLZyUOxb5dB6ejUPjDpgIvojOmm2NP/zRTK3Z8z0xWtNkT7 9ym1I5aK31lgFbzsix4Nk2t8lEA76S+KLt9XZ0YfwJC1jdEPYrSnQs2PZPrkIkmqz1UB y3DpMiCsJ0tIhvgh8LV044iRWUMbLIjUG3+BlB/9sHUWy7nlu5KHYOHjOimo4wXPMiz6 lIUEBXMJQucW/T/OjzjiuISgM4nsrQ31jS704y3hIvIkgco3LcKP7BRd/SjjJ03G55IM YV/w== X-Gm-Message-State: AODbwcAGD2nszvOt+hJHDkXg2RGhIAlLAzre/FCv5wmLtqytYnlzckfp 9prVa44eDbDpQw== X-Received: by 10.28.166.204 with SMTP id p195mr1261852wme.23.1496457345855; Fri, 02 Jun 2017 19:35:45 -0700 (PDT) Received: from [10.1.0.55] ([189.216.190.202]) by smtp.gmail.com with ESMTPSA id x126sm4531522wme.12.2017.06.02.19.35.43 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 02 Jun 2017 19:35:44 -0700 (PDT) From: Pietro Sammarco To: "freebsd-wireless@freebsd.org" Cc: Adrian Chadd , mike@reifenberger.com Subject: RE: More than one SSID doesn't fully work with AR9280 (ath or hostapd bug?) Message-ID: <169a202d-df73-82ca-c0c1-57556d434cde@googlemail.com> Date: Fri, 2 Jun 2017 21:35:40 -0500 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 Content-Language: en-US Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.23 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2017 02:35:49 -0000 Hey, I have also faced the same exact issue last week when setting up two=20 wireless cards in hostapd and freebsd 11. In the end I decided to run=20 two instances of hostapd.conf, one per wireless card. I took hint from this guy here=20 https://lists.freebsd.org/pipermail/freebsd-wireless/2015-October/006204.= html=20 Please let me know sure there be a cleaner way to do it. Best Regards, Pietro Sammarco *> Adrian Chadd*adrian at=20 freebsd.org /> Wed Apr 19 18:28:34 UTC 2017/ ------------------------------------------------------------------------ > hiya, > > I used to run multiple SSIDs at home. I'll set it up again in a couple > days and use it to see what happens. :) > > >-a > On 19 April 2017 at 06:23, Michael > wrote: >/Hi, />/with a current Opnsense, based on FreeBSD-11 its working (two SS= ID's) now />/for me. />//>/Greetings />/--- />/Mike />//>//>/Am 19. April= 2017 15:03:13 MESZ schrieb Valentin VERGEZ />/>: />>//>>/H= i, />>//>>/I experienced the same issue on 10.3 />>/With two SSID, the AS= SOC events are treated twice by hostapd, which />>/discard the first when= starting to process the second. />>/So only the second SSID can establis= h an association. />>//>>/It still works if the first interface handles a= n OPEN SSID. />>//>>/By the way, I will soon work on HEAD and try to repr= oduce too. />>//>>/--- />>//>>/Valentin VERGEZ />>//>>//>>/______________= __________________ />>//>>/De: "Adrian Chadd" > />>/=C3=80= : "Michael Reifenberger" > />>/Cc: fr= eebsd-wireless at freebsd.org=20 />>/Envoy=C3= =A9: Mercredi 14 Septembre 2016 18:00:32 />>/Objet: Re: More than one SSI= D doesn't fully work with AR9280 (ath or />>/hostapd bug?) />>//>>/hi, />= >//>>/I'll have to try it on -head. I tohught we fixed these issues! />>/= />>//>>/-a />>//>>//>>/On 14 September 2016 at 08:27, Michael Reifenberge= r />>/> wrote: />>= / > Hi, />>/ > />>/ > I'm using pfsense (FreeBSD fw.rm-i.net 10.3-RELEASE= -p7 FreeBSD />>/ > 10.3-RELEASE-p7 #0 a0a18f4(stable/16.7): Mon Aug 15 06= :35:28 CEST 2016 />>/ > root at sensey64=20 :/usr/obj/us= r/src/sys/SMP=20 amd64) and a Ubiquiti SR71-E on />>/ > a />>/ > APU.2C4 to get the follow= ing: />>/ > />>/ > I want two interfaces ath0_wlan1 and ath0_wlan2 with d= ifferent SSID's />>/ > and />>/ > PSK's in order to implement />>/ > two = different access filters. />>/ > />>/ > The configuration works. I see: /= >>/ > ath0: flags=3D8843 metric 0= mtu />>/ > 2290 />>/ > ether 00:15:6d:85:e3:00 />>/ > nd6 options=3D21 />>/ > media: IEEE 802.11 Wireless Ethernet aut= oselect mode 11ng />>/ > />>/ > status: running />>/ > ath0_wlan= 1: flags=3D8843 metric 0 />>/ > m= tu />>/ > 1500 />>/ > ether 00:15:6d:85:e3:00 />>/ > inet6 fe80::215:6dff= :fe85:e300%ath0_wlan1 prefixlen 64 scopeid />>/ > 0x9 />>/ > inet 10.0.4.= 1 netmask 0xffffff00 broadcast 10.0.4.255 />>/ > nd6 options=3D21 />>/ > media: IEEE 802.11 Wireless Ethernet autoselec= t mode 11ng />>/ > />>/ > status: running />>/ > ssid WL1 channe= l 2 (2417 MHz 11g ht/40+) bssid 00:15:6d:85:e3:00 />>/ > country US ecm a= uthmode WPA2/802.11i privacy MIXED deftxkey 2 />>/ > AES-CCM 2:128-bit AE= S-CCM 3:128-bit txpower 27 scanvalid 60 />>/ > protmode RTSCTS ampdulimit= 64k ampdudensity 8 shortgi wme burst />>/ > -apbridge dtimperiod 1 -dfs = />>/ > ath0_wlan2: flags=3D8843 m= etric 0 />>/ > mtu />>/ > 1500 />>/ > ether 06:15:6d:85:e3:00 />>/ > inet= 6 fe80::415:6dff:fe85:e300%ath0_wlan2 prefixlen 64 scopeid />>/ > 0xa />>= / > inet 10.0.5.1 netmask 0xffffff00 broadcast 10.0.5.255 />>/ > nd6 opti= ons=3D21 />>/ > media: IEEE 802.11 Wireless Et= hernet autoselect mode 11ng />>/ > />>/ > status: running />>/ >= ssid WL2 channel 2 (2417 MHz 11g ht/40+) bssid 06:15:6d:85:e3:00 />>/ > = country US ecm authmode WPA2/802.11i privacy MIXED deftxkey 2 />>/ > AES-= CCM 2:128-bit AES-CCM 3:128-bit txpower 27 scanvalid 60 />>/ > protmode R= TSCTS ampdulimit 64k ampdudensity 8 shortgi wme burst />>/ > -apbridge dt= imperiod 1 -dfs />>/ > />>/ > Both hostapd.conf's seem reasonable: />>/ >= root at fw=20 :/var/etc # = diff -u2 hostapd_ath0_wlan1.conf />>/ > hostapd_ath0_wlan2.conf />>/ > --= - hostapd_ath0_wlan1.conf 2016-03-07 02:00:58.528705000 +0100 />>/ > +++ = hostapd_ath0_wlan2.conf 2016-03-07 02:01:00.348875000 +0100 />>/ > @@ -1,= 3 +1,3 @@ />>/ > -interface=3Dath0_wlan1 />>/ > +interface=3Dath0_wlan2 /= >>/ > driver=3Dbsd />>/ > logger_syslog=3D-1 />>/ > @@ -5,11 +5,11 @@ />>= / > logger_stdout=3D-1 />>/ > logger_stdout_level=3D0 />>/ > -dump_file=3D= /tmp/hostapd_ath0_wlan1.dump />>/ > +dump_file=3D/tmp/hostapd_ath0_wlan2.= dump />>/ > ctrl_interface=3D/var/run/hostapd />>/ > ctrl_interface_group= =3Dwheel />>/ > -#accept_mac_file=3D/tmp/hostapd_ath0_wlan1.accept />>/ >= -#deny_mac_file=3D/tmp/hostapd_ath0_wlan1.deny />>/ > +#accept_mac_file=3D= /tmp/hostapd_ath0_wlan2.accept />>/ > +#deny_mac_file=3D/tmp/hostapd_ath0= _wlan2.deny />>/ > #macaddr_acl=3D />>/ > -ssid=3DWL1 />>/ > +ssid=3DWL2 = />>/ > debug=3D />>/ > auth_algs=3D1 />>/ > />>/ > The problem: />>/ > On= ly one of the interfaces works fully at the same time />>/ > Either the f= irst one or the second one, but not both together. />>/ > />>/ > If enabl= ing both at the same time, I see both SSID's on the WLAN, />>/ > can auth= enticate to one of the interfaces (probably the first=20 configured />>/ > one) but not />>/ > to the other. The other allways giv= es an authentification failure. />>/ > />>/ > How can I debug this issue = further? />>/ > />>/ > BTW (if it's related): />>/ > Over time I see some= of the following errors in dmesg: />>/ > ... />>/ > ath0: stuck beacon; = resetting (bmiss count 4) />>/ > ath0: stuck beacon; resetting (bmiss cou= nt 4) />>/ > ath0: stuck beacon; resetting (bmiss count 4) />>/ > ath0: s= tuck beacon; resetting (bmiss count 4) />>/ > ath0: stuck beacon; resetti= ng (bmiss count 4) />>/ > .... />>/ > />>/ > />>/ > In the wireless logfi= le I see during an unsuccessfull authentification: />>/ > ... />>/ > Sep = 14 17:19:53 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802= =2E11: />>/ > associated />>/ > Sep 14 17:19:53 fw hostapd: ath0_wlan2: S= TA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > associated />>/ > Sep 14 = 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 1 />>/ > notification />>/ > Sep 14 17:19:53 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 start />>/ > authentication />>/ > Sep 14 17:19:53 fw hostapd: ath0_wlan2= : STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing port />>= / > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />= >/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17:19:54 fw = hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Key />>/ > t= imeout />>/ > Sep 14 17:19:54 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:= f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17= :19:55 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Ke= y />>/ > timeout />>/ > Sep 14 17:19:55 fw hostapd: ath0_wlan2: STA c4:85= :08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ >= Sep 14 17:19:56 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ = > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:19:56 fw hostapd: ath0_wlan2:= STA c4:85:08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handsh= ake />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = WPA: />>/ > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:19:57 fw hostapd: a= th0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > PTKSTART: />>/ > Retry limit= 4 reached />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a= :cf:f0 WPA:=20 event />>/ > 3 />>/ > notification />>/ > Sep 14 17:19:57 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = MLME: />>/ > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) />>/ > = Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: />>/ = > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) />>/ > Sep 14 17:19:57 fw ho= stapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > disas= sociated />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:c= f:f0 IEEE />>/ > 802.11: />>/ > disassociated />>/ > Sep 14 17:19:57 fw h= ostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 2 />>/ > notification />>/ > Sep 14 17:19:57 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 = IEEE />>/ > 802.11: />>/ > associated />>/ > Sep 14 17:19:57 fw hostapd: = ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > associated /= >>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: = event />>/ > 1 />>/ > notification />>/ > Sep 14 17:19:57 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 start />>/ > authentication />>/ > Sep 14 17:19:57 fw hostapd: ath0_wlan2= : STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing port />>= / > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />= >/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17:19:58 fw = hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Key />>/ > t= imeout />>/ > Sep 14 17:19:58 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:= f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17= :19:59 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Ke= y />>/ > timeout />>/ > Sep 14 17:19:59 fw hostapd: ath0_wlan2: STA c4:85= :08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ >= Sep 14 17:20:00 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ = > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:00 fw hostapd: ath0_wlan2:= STA c4:85:08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handsh= ake />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = WPA: />>/ > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:01 fw hostapd: a= th0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > PTKSTART: />>/ > Retry limit= 4 reached />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a= :cf:f0 WPA:=20 event />>/ > 3 />>/ > notification />>/ > Sep 14 17:20:01 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = MLME: />>/ > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) />>/ > = Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: />>/ = > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) />>/ > Sep 14 17:20:01 fw ho= stapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > disas= sociated />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan1: STA c4:85:08:3a:c= f:f0 IEEE />>/ > 802.11: />>/ > disassociated />>/ > Sep 14 17:20:01 fw h= ostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 2 />>/ > notification />>/ > Sep 14 17:20:01 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 = IEEE />>/ > 802.11: />>/ > associated />>/ > Sep 14 17:20:01 fw hostapd: = ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > associated /= >>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: = event />>/ > 1 />>/ > notification />>/ > Sep 14 17:20:01 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 start />>/ > authentication />>/ > Sep 14 17:20:01 fw hostapd: ath0_wlan2= : STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing port />>= / > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />= >/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17:20:02 fw = hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Key />>/ > t= imeout />>/ > Sep 14 17:20:02 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:= f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17= :20:03 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Ke= y />>/ > timeout />>/ > Sep 14 17:20:03 fw hostapd: ath0_wlan2: STA c4:85= :08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ >= Sep 14 17:20:04 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ = > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:04 fw hostapd: ath0_wlan2:= STA c4:85:08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handsh= ake />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = WPA: />>/ > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:05 fw hostapd: a= th0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > PTKSTART: />>/ > Retry limit= 4 reached />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a= :cf:f0 WPA:=20 event />>/ > 3 />>/ > notification />>/ > Sep 14 17:20:05 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = MLME: />>/ > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) />>/ > = Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: />>/ = > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) />>/ > Sep 14 17:20:05 fw ho= stapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > disas= sociated />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:c= f:f0 WPA:=20 event />>/ > 2 />>/ > notification />>/ > Sep 14 17:20:05 fw hostapd: ath= 0_wlan1: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > disassociated /= >>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE = />>/ > 802.1X: />>/ > unauthorizing port />>/ > Sep 14 17:20:05 fw hostap= d: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > associate= d />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IE= EE />>/ > 802.11: />>/ > associated />>/ > Sep 14 17:20:05 fw hostapd: at= h0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 1 />>/ > notification />>/ > Sep 14 17:20:05 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 start />>/ > authentication />>/ > Sep 14 17:20:05 fw hostapd: ath0_wlan2= : STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing port />>= / > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />= >/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17:20:06 fw = hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Key />>/ > t= imeout />>/ > Sep 14 17:20:06 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:= f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17= :20:07 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Ke= y />>/ > timeout />>/ > Sep 14 17:20:07 fw hostapd: ath0_wlan2: STA c4:85= :08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ >= Sep 14 17:20:08 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ = > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:08 fw hostapd: ath0_wlan2:= STA c4:85:08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handsh= ake />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = WPA: />>/ > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:09 fw hostapd: a= th0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > PTKSTART: />>/ > Retry limit= 4 reached />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a= :cf:f0 WPA:=20 event />>/ > 3 />>/ > notification />>/ > Sep 14 17:20:09 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 = IEEE />>/ > 802.11: />>/ > disassociated />>/ > Sep 14 17:20:09 fw hostap= d: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: />>/ > MLME-DEAUTHENTICATE.ind= ication(c4:85:08:3a:cf:f0, 2) />>/ > Sep 14 17:20:09 fw hostapd: ath0_wla= n2: STA c4:85:08:3a:cf:f0 MLME: />>/ > MLME-DELETEKEYS.request(c4:85:08:3= a:cf:f0) />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:c= f:f0 IEEE />>/ > 802.11: />>/ > disassociated />>/ > Sep 14 17:20:09 fw h= ostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 2 />>/ > notification />>/ > Sep 14 17:20:09 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = IEEE />>/ > 802.11: />>/ > associated />>/ > Sep 14 17:20:09 fw hostapd: = ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > associated /= >>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: = event />>/ > 1 />>/ > notification />>/ > Sep 14 17:20:09 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 start />>/ > authentication />>/ > Sep 14 17:20:09 fw hostapd: ath0_wlan2= : STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing port />>= / > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />= >/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17:20:10 fw = hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Key />>/ > t= imeout />>/ > Sep 14 17:20:10 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:= f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ > Sep 14 17= :20:11 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > EAPOL-Ke= y />>/ > timeout />>/ > Sep 14 17:20:11 fw hostapd: ath0_wlan2: STA c4:85= :08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handshake />>/ >= Sep 14 17:20:12 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ = > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:12 fw hostapd: ath0_wlan2:= STA c4:85:08:3a:cf:f0 WPA: />>/ > sending />>/ > 1/4 msg of 4-Way Handsh= ake />>/ > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = WPA: />>/ > EAPOL-Key />>/ > timeout />>/ > Sep 14 17:20:13 fw hostapd: a= th0_wlan2: STA c4:85:08:3a:cf:f0 WPA: />>/ > PTKSTART: />>/ > Retry limit= 4 reached />>/ > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a= :cf:f0 WPA:=20 event />>/ > 3 />>/ > notification />>/ > Sep 14 17:20:13 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 = MLME: />>/ > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) />>/ > = Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: />>/ = > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) />>/ > Sep 14 17:20:13 fw ho= stapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.11: />>/ > disas= sociated />>/ > Sep 14 17:20:13 fw hostapd: ath0_wlan1: STA c4:85:08:3a:c= f:f0 IEEE />>/ > 802.11: />>/ > disassociated />>/ > Sep 14 17:20:13 fw h= ostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA:=20 event />>/ > 2 />>/ > notification />>/ > Sep 14 17:20:13 fw hostapd: ath= 0_wlan2: STA c4:85:08:3a:cf:f0 IEEE />>/ > 802.1X: />>/ > unauthorizing p= ort />>/ > ... />>/ > />>/ > Any clues? />>/ > />>/ > Thanks in advance! = />>/ > --- />>/ > mike mr at freebsd.org=20 />>/ > />>/= > />>/ > Gru=C3=9F />>/ > --- />>/ > Michael Reifenberger />>/ > />>/___= ____________________________________________ />>/freebsd-wireless at free= bsd.org=20 mailing lis= t />>/https://lists.freebsd.org/mailman/listinfo/freebsd-wireless />>/To = unsubscribe, send any mail to />>/"freebsd-wireless-unsubscribe at freebs= d.org=20 " />>//>>//>= //>/Gru=C3=9F />/--- />/Michael/ From owner-freebsd-wireless@freebsd.org Sat Jun 3 02:37:25 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 6E39CB7B6FC for ; Sat, 3 Jun 2017 02:37:25 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-wr0-x233.google.com (mail-wr0-x233.google.com [IPv6:2a00:1450:400c:c0c::233]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id E98E67FB3F for ; Sat, 3 Jun 2017 02:37:24 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by mail-wr0-x233.google.com with SMTP id v111so8014035wrc.3 for ; Fri, 02 Jun 2017 19:37:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-transfer-encoding; bh=SlcyDAUqTco7YU44+vA2a6LV5xbX9UQc8Lh2yk1Z5xw=; b=UFdlYo1CFBDNnAy4N490BowvdsdIjtY9FtJtYlW3Z6RyqfUVNz2nytZQ/cPIl8HjMA JuV8H9D0RxEeLeQmA8ZhmeTXh7ef57oeo/ZXPWL2Q7f90ykTuJBcheL3YLe7LPCyLSbm p58a5cOYkeQfZM0c69POcuNtW5sMSSyLD9HiPkcqrLt9q0jNTy2IcgDtG9bUC2nPO55M qbacoUp5TGS9f5r0d6DxBldQRtlNnYyjdWqhLYHXcOXl2baZ7H2vmsvHp2Cu7KujLHB3 TDUj/Z6V8c1cqaswnJWJKi1ktd2v45pudgzLB3oRzuXDW+gTpusoML8jzr8diiFdr3/+ mL8A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc:content-transfer-encoding; bh=SlcyDAUqTco7YU44+vA2a6LV5xbX9UQc8Lh2yk1Z5xw=; b=oXfVi87M6eQGgApytWf5255oka5ofd2mPCNquXRDyqzkVszwbU1viprCrqegfh53aa 3NOL2ZgEnANESflhC/3IJDjuUsbbnZbuuQstl+dVL2X3XWsffDePgg9kVp7op6DUhZWc oJkcpt+9582Arltr6ZDjFe4ETY6NiMqcwDj4xwBnSsIyITvD9dXYAIQ4X8+/+id5qkCt +b9nL7/LeRl/Ur39jMbke3Ls3bk0t5p5jl1S+lOdikWeSYyoS/PEU9786UBAYjSYul+W PlWBNBqMnoXW8D/3X9+Yr9z+mRkvv20uLbbUwKQabBx/bAGnvJRDY0RoTRzgvzf8kwSo Tv9w== X-Gm-Message-State: AODbwcAbK25aHr0MmEU528RzUXDYi8YmT8LBcG9jgwbG789BJc5RWwRk /EPJ21UEJr7C7EkN6igjMs7BDw6AGg== X-Received: by 10.223.152.52 with SMTP id v49mr6668267wrb.60.1496457443117; Fri, 02 Jun 2017 19:37:23 -0700 (PDT) MIME-Version: 1.0 Received: by 10.28.193.134 with HTTP; Fri, 2 Jun 2017 19:37:22 -0700 (PDT) In-Reply-To: <169a202d-df73-82ca-c0c1-57556d434cde@googlemail.com> References: <169a202d-df73-82ca-c0c1-57556d434cde@googlemail.com> From: Adrian Chadd Date: Fri, 2 Jun 2017 19:37:22 -0700 Message-ID: Subject: Re: More than one SSID doesn't fully work with AR9280 (ath or hostapd bug?) To: Pietro Sammarco Cc: "freebsd-wireless@freebsd.org" , Michael Reifenberger Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2017 02:37:25 -0000 hiya, I had to run two copies of hostapd. -a On 2 June 2017 at 19:35, Pietro Sammarco w= rote: > Hey, > > I have also faced the same exact issue last week when setting up two > wireless cards in hostapd and freebsd 11. In the end I decided to run two > instances of hostapd.conf, one per wireless card. > > I took hint from this guy here > https://lists.freebsd.org/pipermail/freebsd-wireless/2015-October/006204.= html > > Please let me know sure there be a cleaner way to do it. > > Best Regards, > Pietro Sammarco > >> Adrian Chadd adrian at freebsd.org >> Wed Apr 19 18:28:34 UTC 2017 > > ________________________________ > >> hiya, >> >> I used to run multiple SSIDs at home. I'll set it up again in a couple >> days and use it to see what happens. :) >> >> >>-a >> > > On 19 April 2017 at 06:23, Michael wrote: >> Hi, >> with a current Opnsense, based on FreeBSD-11 its working (two SSID's) no= w >> for me. >> >> Greetings >> --- >> Mike >> >> >> Am 19. April 2017 15:03:13 MESZ schrieb Valentin VERGEZ >> : >>> >>> Hi, >>> >>> I experienced the same issue on 10.3 >>> With two SSID, the ASSOC events are treated twice by hostapd, which >>> discard the first when starting to process the second. >>> So only the second SSID can establish an association. >>> >>> It still works if the first interface handles an OPEN SSID. >>> >>> By the way, I will soon work on HEAD and try to reproduce too. >>> >>> --- >>> >>> Valentin VERGEZ >>> >>> >>> ________________________________ >>> >>> De: "Adrian Chadd" >>> =C3=80: "Michael Reifenberger" >>> Cc: freebsd-wireless at freebsd.org >>> Envoy=C3=A9: Mercredi 14 Septembre 2016 18:00:32 >>> Objet: Re: More than one SSID doesn't fully work with AR9280 (ath or >>> hostapd bug?) >>> >>> hi, >>> >>> I'll have to try it on -head. I tohught we fixed these issues! >>> >>> >>> -a >>> >>> >>> On 14 September 2016 at 08:27, Michael Reifenberger >>> wrote: >>> > Hi, >>> > >>> > I'm using pfsense (FreeBSD fw.rm-i.net 10.3-RELEASE-p7 FreeBSD >>> > 10.3-RELEASE-p7 #0 a0a18f4(stable/16.7): Mon Aug 15 06:35:28 CEST 201= 6 >>> > root at sensey64:/usr/obj/usr/src/sys/SMP amd64) and a Ubiquiti SR71= -E >>> > on >>> > a >>> > APU.2C4 to get the following: >>> > >>> > I want two interfaces ath0_wlan1 and ath0_wlan2 with different SSID's >>> > and >>> > PSK's in order to implement >>> > two different access filters. >>> > >>> > The configuration works. I see: >>> > ath0: flags=3D8843 metric 0 m= tu >>> > 2290 >>> > ether 00:15:6d:85:e3:00 >>> > nd6 options=3D21 >>> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >>> > >>> > status: running >>> > ath0_wlan1: flags=3D8843 metr= ic 0 >>> > mtu >>> > 1500 >>> > ether 00:15:6d:85:e3:00 >>> > inet6 fe80::215:6dff:fe85:e300%ath0_wlan1 prefixlen 64 scopei= d >>> > 0x9 >>> > inet 10.0.4.1 netmask 0xffffff00 broadcast 10.0.4.255 >>> > nd6 options=3D21 >>> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >>> > >>> > status: running >>> > ssid WL1 channel 2 (2417 MHz 11g ht/40+) bssid >>> > 00:15:6d:85:e3:00 >>> > country US ecm authmode WPA2/802.11i privacy MIXED deftxkey 2 >>> > AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 27 scanvalid 60 >>> > protmode RTSCTS ampdulimit 64k ampdudensity 8 shortgi wme bur= st >>> > -apbridge dtimperiod 1 -dfs >>> > ath0_wlan2: flags=3D8843 metr= ic 0 >>> > mtu >>> > 1500 >>> > ether 06:15:6d:85:e3:00 >>> > inet6 fe80::415:6dff:fe85:e300%ath0_wlan2 prefixlen 64 scopei= d >>> > 0xa >>> > inet 10.0.5.1 netmask 0xffffff00 broadcast 10.0.5.255 >>> > nd6 options=3D21 >>> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >>> > >>> > status: running >>> > ssid WL2 channel 2 (2417 MHz 11g ht/40+) bssid >>> > 06:15:6d:85:e3:00 >>> > country US ecm authmode WPA2/802.11i privacy MIXED deftxkey 2 >>> > AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 27 scanvalid 60 >>> > protmode RTSCTS ampdulimit 64k ampdudensity 8 shortgi wme bur= st >>> > -apbridge dtimperiod 1 -dfs >>> > >>> > Both hostapd.conf's seem reasonable: >>> > root at fw:/var/etc # diff -u2 hostapd_ath0_wlan1.conf >>> > hostapd_ath0_wlan2.conf >>> > --- hostapd_ath0_wlan1.conf 2016-03-07 02:00:58.528705000 +0100 >>> > +++ hostapd_ath0_wlan2.conf 2016-03-07 02:01:00.348875000 +0100 >>> > @@ -1,3 +1,3 @@ >>> > -interface=3Dath0_wlan1 >>> > +interface=3Dath0_wlan2 >>> > driver=3Dbsd >>> > logger_syslog=3D-1 >>> > @@ -5,11 +5,11 @@ >>> > logger_stdout=3D-1 >>> > logger_stdout_level=3D0 >>> > -dump_file=3D/tmp/hostapd_ath0_wlan1.dump >>> > +dump_file=3D/tmp/hostapd_ath0_wlan2.dump >>> > ctrl_interface=3D/var/run/hostapd >>> > ctrl_interface_group=3Dwheel >>> > -#accept_mac_file=3D/tmp/hostapd_ath0_wlan1.accept >>> > -#deny_mac_file=3D/tmp/hostapd_ath0_wlan1.deny >>> > +#accept_mac_file=3D/tmp/hostapd_ath0_wlan2.accept >>> > +#deny_mac_file=3D/tmp/hostapd_ath0_wlan2.deny >>> > #macaddr_acl=3D >>> > -ssid=3DWL1 >>> > +ssid=3DWL2 >>> > debug=3D >>> > auth_algs=3D1 >>> > >>> > The problem: >>> > Only one of the interfaces works fully at the same time >>> > Either the first one or the second one, but not both together. >>> > >>> > If enabling both at the same time, I see both SSID's on the WLAN, >>> > can authenticate to one of the interfaces (probably the first >>> > configured >>> > one) but not >>> > to the other. The other allways gives an authentification failure. >>> > >>> > How can I debug this issue further? >>> > >>> > BTW (if it's related): >>> > Over time I see some of the following errors in dmesg: >>> > ... >>> > ath0: stuck beacon; resetting (bmiss count 4) >>> > ath0: stuck beacon; resetting (bmiss count 4) >>> > ath0: stuck beacon; resetting (bmiss count 4) >>> > ath0: stuck beacon; resetting (bmiss count 4) >>> > ath0: stuck beacon; resetting (bmiss count 4) >>> > .... >>> > >>> > >>> > In the wireless logfile I see during an unsuccessfull authentificatio= n: >>> > ... >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 1 >>> > notification >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > start >>> > authentication >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:19:53 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:54 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:54 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:55 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:55 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:56 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:56 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > PTKSTART: >>> > Retry limit 4 reached >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 3 >>> > notification >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 2 >>> > notification >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 1 >>> > notification >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > start >>> > authentication >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:19:57 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:58 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:58 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:19:59 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:19:59 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:00 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:00 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > PTKSTART: >>> > Retry limit 4 reached >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 3 >>> > notification >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 2 >>> > notification >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 1 >>> > notification >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > start >>> > authentication >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:01 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:02 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:02 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:03 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:03 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:04 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:04 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > PTKSTART: >>> > Retry limit 4 reached >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 3 >>> > notification >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 2 >>> > notification >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 1 >>> > notification >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > start >>> > authentication >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:05 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:06 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:06 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:07 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:07 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:08 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:08 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > PTKSTART: >>> > Retry limit 4 reached >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 3 >>> > notification >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 2 >>> > notification >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > associated >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 1 >>> > notification >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > start >>> > authentication >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:09 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:10 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:10 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:11 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:11 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:12 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:12 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > sending >>> > 1/4 msg of 4-Way Handshake >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > EAPOL-Key >>> > timeout >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > PTKSTART: >>> > Retry limit 4 reached >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 3 >>> > notification >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DEAUTHENTICATE.indication(c4:85:08:3a:cf:f0, 2) >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 MLME: >>> > MLME-DELETEKEYS.request(c4:85:08:3a:cf:f0) >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan1: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.11: >>> > disassociated >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 WPA: >>> > event >>> > 2 >>> > notification >>> > Sep 14 17:20:13 fw hostapd: ath0_wlan2: STA c4:85:08:3a:cf:f0 IEEE >>> > 802.1X: >>> > unauthorizing port >>> > ... >>> > >>> > Any clues? >>> > >>> > Thanks in advance! >>> > --- >>> > mike mr at freebsd.org >>> > >>> > >>> > Gru=C3=9F >>> > --- >>> > Michael Reifenberger >>> > >>> _______________________________________________ >>> freebsd-wireless at freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>> To unsubscribe, send any mail to >>> "freebsd-wireless-unsubscribe at freebsd.org" >>> >>> >> >> Gru=C3=9F >> --- >> Michael From owner-freebsd-wireless@freebsd.org Sat Jun 3 20:53:05 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id D951BBF8FA3 for ; Sat, 3 Jun 2017 20:53:05 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: from mail-wr0-x231.google.com (mail-wr0-x231.google.com [IPv6:2a00:1450:400c:c0c::231]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 6BB6A7DD48 for ; Sat, 3 Jun 2017 20:53:05 +0000 (UTC) (envelope-from pietro.sammarco@googlemail.com) Received: by mail-wr0-x231.google.com with SMTP id v104so21298040wrb.0 for ; Sat, 03 Jun 2017 13:53:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=to:from:subject:message-id:date:user-agent:mime-version :content-language; bh=E3h3SK5eOgUgzJpt4BuGsl/XBSXCSGttZL8H8R/b32I=; b=Vebv2sNeLr09+SkIOVXBkWtGk8/YgbFV5hZJ7t2JVLuqNQN2kVaSWh7rGXpFdX4G6i q2ho0JMgkutX87fuziS8tkZbkO7xLUZGG8vuoVsaXE2FOQb/RgE/ssU7u9gVu8RvtTgy eeC76ZXdfGlq2sMpTMiGEzIyOOTSfoIxgE1N0w9irIDi4yT9Glpfrbq8gvXhYjWEvi5d vV4gCIc/2D4b+O8+9ulMAAvGje53hMN7Jh8pZfHgfVSmV++GHuLCaaUwRqGxvJik/OIk fgOqQJ1UYG6y/HaZyMH+NnUVGyAbvXfNMOf0na8UYMtdMUcxj9YoCjzMD2K8BQbTqHoA WRvQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:to:from:subject:message-id:date:user-agent :mime-version:content-language; bh=E3h3SK5eOgUgzJpt4BuGsl/XBSXCSGttZL8H8R/b32I=; b=gYsA3SBcfobZzkSUByTZf+eYcFvbNuZLG3Ral75r6Ch976pQiCoeddWy7sCN+rE+9+ 8dQhe9xYafdItx4EzacjPFZvsRK+IW5DpjV/x13AP+T9Jtxfzsb4ZXC6GvJse+ahcOGs Ix8QNkDRZN3ghm/+OA1GtcrMEW2VZsV9DIgMgPuvEBKcMhwnPghAF6ENtHYIGC97T2fd 7BEimfPzjzzqTr2hQrbpmBU7POw0AutVxG5YjJG3E6BvezXnVYtFAGkp/Vy3e1ttyLwJ 8ieBn87FCU0XG5yqVC/VaQsI309zS9lPKkmREuJP/xONPwiANydDZmE36Y4WCzDgggXd DFbQ== X-Gm-Message-State: AODbwcCcWFULkJ7ug2ww9stk0TREThFOt7NIGY6KSRellMx1wXHdle5L 9xITG8tf8y29YzNBnxU= X-Received: by 10.223.134.46 with SMTP id 43mr10625465wrv.123.1496523183742; Sat, 03 Jun 2017 13:53:03 -0700 (PDT) Received: from [10.1.0.55] ([189.216.190.202]) by smtp.gmail.com with ESMTPSA id 140sm6876536wmu.23.2017.06.03.13.53.01 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sat, 03 Jun 2017 13:53:03 -0700 (PDT) To: "freebsd-wireless@freebsd.org" From: Pietro Sammarco Subject: How do I enable 802.11n in HOSTAPD for Atheros 9280? Message-ID: <3ddb68d1-f1a0-6e11-7d31-7413559d17cb@googlemail.com> Date: Sat, 3 Jun 2017 15:52:59 -0500 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 Content-Language: en-US Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.23 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2017 20:53:05 -0000 Hello folks. I am here once again trying to figure out how to enable 802.11n in HOSTAPD for the Atheros 9280 wireless chip on FreeBSD 11. Although "ieee80211n" is not recognized by FreeBSD's HOSTAPD, If I am not mistaken I was told that it would handle 802.11n tx/rx automatically on supported interfaces, and based on https://wiki.freebsd.org/dev/ath(4)/80211n mine appear to be supported. Still, the antennas are transferring in G mode. Do I need to build a custom kernel with "options ATH_ENABLE_11N" enabled? Also, do I need to be on -HEAD for this to work? I have downloaded 11-STABLE branch sources and "options ATH_ENABLE_11N" seems to be enabled by default with GENERIC kernel, I could be wrong though. Right now I am on FreeBSD 11-RELEASE p9. $ sudo dmesg |grep ath Password: ath0: mem 0xfe400000-0xfe40ffff at device 0.0 on pci1 [ath] enabling AN_TOP2_FIXUP ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ath1: mem 0xfe800000-0xfe80ffff at device 0.0 on pci5 [ath] enabling AN_TOP2_FIXUP ath1: [HT] enabling HT modes ath1: [HT] 1 stream STBC receive enabled ath1: [HT] 1 stream STBC transmit enabled ath1: [HT] 2 RX streams; 2 TX streams ath1: AR9280 mac 128.2 RF5133 phy 13.0 ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 $ ifconfig wlan0 && ifconfig wlan0 list caps wlan0: flags=8943 metric 0 mtu 1500 ether 04:f0:21:2e:54:4a nd6 options=29 media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: running ssid WirelessFreedom channel 11 (2462 MHz 11g) bssid 04:f0:21:2e:54:4a regdomain FCC country US ecm authmode WPA2/802.11i privacy MIXED deftxkey 3 TKIP 2:128-bit TKIP 3:128-bit txpower 30 scanvalid 60 protmode CTS wme burst dtimperiod 1 -dfs groups: wlan drivercaps=4f8def41 cryptocaps=1f htcaps=701ce $ cat /etc/hostapd-wlan0.conf interface=wlan0 bssid=04:f0:21:2e:54:4a channel=11 country_code=US # the country code ctrl_interface=/var/run/hostapd ctrl_interface_group=0 logger_syslog=-1 logger_syslog_level=2 ssid=WirelessFreedom wpa=2 max_num_sta=255 beacon_int=100 #wmm_enabled=1 # spaces between beginning and end of the password will be counted as part of it!!! wpa_passphrase=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXe wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP $ cat /etc/rc.conf |grep wlan0 wlans_ath0="wlan0" create_args_wlan0="wlanmode hostap" ifconfig_wlan0="up" $ cat /boot/loader.conf |grep ath if_ath_load="YES" Thanks for your help Regards, Pietro ** From owner-freebsd-wireless@freebsd.org Sat Jun 3 21:50:10 2017 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B5CD5BF9A2E for ; Sat, 3 Jun 2017 21:50:10 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-wr0-x22a.google.com (mail-wr0-x22a.google.com [IPv6:2a00:1450:400c:c0c::22a]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4BF7E7EFF5 for ; Sat, 3 Jun 2017 21:50:10 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by mail-wr0-x22a.google.com with SMTP id g76so21596460wrd.1 for ; Sat, 03 Jun 2017 14:50:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc; bh=i/aOpnSoI+gzhsHhpoVhdF/WwwgzXkhL3nsUQDPLgVo=; b=N7e/Fbirn5O4vdOMzxWJnokR0BMbdIpXv0JTXan8bViiyEnODHJoFOd2N8CyQIvsSo v8ugse/ZG5NVHY+KZj6weHb7azxSLWTwbGdVdTp6ZvD0w1MLNgmXmnxwKeiwyhNKgNlg b0hdiXL8Qwr5j6tTe0v4bHDHuzh2Xp9+OibBLBNUNwovCGpisX30r/nWYmKs/Kcdgi+g lDB5BRGL6V+llmCm1z2buken7c8HM7huiIdh4UXlV7ovcTqZkqqEPXNKGWQnYzjoroIw 72hgv/VK/YO+MLMQu2N7xO9WITtlPLSr04MCJgJgbuA3tzJALsX90HeK34aqwlZDi+zs HneA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc; bh=i/aOpnSoI+gzhsHhpoVhdF/WwwgzXkhL3nsUQDPLgVo=; b=BvMJe9MEEDUYkSL6AwvwZNeVX2BpeU6NyBhSyJtx/gkQ8sBamt0B+1rljThugrkaAv kCnWy5CFRfITc+aIM8NFlYDkhLlG/u1qvUVc8jUUBWe/0SVqVsS56gv2WWW30fK2TEWA 0hnWwqI0iF5r3l3qrvfTBdoi6uij1AaqRo83l9G7V0N+O63W20EYHgT+WBkGAmzpo+pt Na9eIRwC13ICyay8T9wsgbACeDiQN6bGsDRMOkxB8WzqKvFnR2SDU1ddwQg5z+CDAaIp 0fWhP0oUYrtjotP2erdCyAOPMcRHlX+NDnLfsGwc+F5rpMcx3MWcvo6ZqLXl7D2EY4ie xJIw== X-Gm-Message-State: AODbwcDw+foPC7kTP5gMx84YumNsRee4/8dfO0nNvzbj0+13LBdDUTAj v2V02m3oGSYSJ0Ksxg9V+fGt3R/iTC4Q X-Received: by 10.223.171.24 with SMTP id q24mr4604262wrc.89.1496526608586; Sat, 03 Jun 2017 14:50:08 -0700 (PDT) MIME-Version: 1.0 Received: by 10.28.193.134 with HTTP; Sat, 3 Jun 2017 14:50:07 -0700 (PDT) In-Reply-To: <3ddb68d1-f1a0-6e11-7d31-7413559d17cb@googlemail.com> References: <3ddb68d1-f1a0-6e11-7d31-7413559d17cb@googlemail.com> From: Adrian Chadd Date: Sat, 3 Jun 2017 14:50:07 -0700 Message-ID: Subject: Re: How do I enable 802.11n in HOSTAPD for Atheros 9280? To: Pietro Sammarco Cc: "freebsd-wireless@freebsd.org" Content-Type: text/plain; charset="UTF-8" X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2017 21:50:10 -0000 hi, you should just be able to configure the channel as 11:ht/20 before you start hostapd. -a On 3 June 2017 at 13:52, Pietro Sammarco via freebsd-wireless wrote: > Hello folks. > > I am here once again trying to figure out how to enable 802.11n in HOSTAPD > for the Atheros 9280 wireless chip on FreeBSD 11. > > Although "ieee80211n" is not recognized by FreeBSD's HOSTAPD, If I am not > mistaken I was told that it would handle 802.11n tx/rx automatically on > supported interfaces, and based on > https://wiki.freebsd.org/dev/ath(4)/80211n mine appear to be supported. > Still, the antennas are transferring in G mode. > > Do I need to build a custom kernel with "options ATH_ENABLE_11N" enabled? > Also, do I need to be on -HEAD for this to work? I have downloaded 11-STABLE > branch sources and "options ATH_ENABLE_11N" seems to be enabled by default > with GENERIC kernel, I could be wrong though. Right now I am on FreeBSD > 11-RELEASE p9. > > $ sudo dmesg |grep ath > Password: > ath0: mem 0xfe400000-0xfe40ffff at device 0.0 on pci1 > [ath] enabling AN_TOP2_FIXUP > ath0: [HT] enabling HT modes > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > ath1: mem 0xfe800000-0xfe80ffff at device 0.0 on pci5 > [ath] enabling AN_TOP2_FIXUP > ath1: [HT] enabling HT modes > ath1: [HT] 1 stream STBC receive enabled > ath1: [HT] 1 stream STBC transmit enabled > ath1: [HT] 2 RX streams; 2 TX streams > ath1: AR9280 mac 128.2 RF5133 phy 13.0 > ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > $ ifconfig wlan0 && ifconfig wlan0 list caps > wlan0: flags=8943 metric 0 > mtu 1500 > ether 04:f0:21:2e:54:4a > nd6 options=29 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g > status: running > ssid WirelessFreedom channel 11 (2462 MHz 11g) bssid 04:f0:21:2e:54:4a > regdomain FCC country US ecm authmode WPA2/802.11i privacy MIXED > deftxkey 3 TKIP 2:128-bit TKIP 3:128-bit txpower 30 scanvalid 60 > protmode CTS wme burst dtimperiod 1 -dfs > groups: wlan > drivercaps=4f8def41 > cryptocaps=1f > htcaps=701ce > > $ cat /etc/hostapd-wlan0.conf > interface=wlan0 > bssid=04:f0:21:2e:54:4a > channel=11 > country_code=US # the country code > ctrl_interface=/var/run/hostapd > ctrl_interface_group=0 > logger_syslog=-1 > logger_syslog_level=2 > ssid=WirelessFreedom > wpa=2 > max_num_sta=255 > beacon_int=100 > #wmm_enabled=1 > # spaces between beginning and end of the password will be counted as part > of it!!! > wpa_passphrase=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXe > wpa_key_mgmt=WPA-PSK > wpa_pairwise=TKIP CCMP > > $ cat /etc/rc.conf |grep wlan0 > wlans_ath0="wlan0" > create_args_wlan0="wlanmode hostap" > ifconfig_wlan0="up" > > $ cat /boot/loader.conf |grep ath > if_ath_load="YES" > > Thanks for your help > > Regards, > Pietro > ** > > > > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"