Date: Fri, 13 May 2011 17:53:43 -0500 From: Antonio Olivares <olivares14031@gmail.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: automounting of usb disks not working how to troubleshoot Message-ID: <BANLkTikPyLd0rT6SVqxb%2BT=HZBW61e5bFQ@mail.gmail.com> In-Reply-To: <BANLkTin3AYjMC2Hv1HN9hi0kr6EJBVp8Tg@mail.gmail.com> References: <BANLkTin3AYjMC2Hv1HN9hi0kr6EJBVp8Tg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 12, 2011 at 7:33 PM, Antonio Olivares <olivares14031@gmail.com> wrote: > Dear folks, > > I have recently successfully updated an amd 64 bit machine from 8.1 to > 8.2 release and reinstalled most of the previously installed ports. > Now, I tried to use my usb disk and it is not automounting :( =A0I like > the convenience of automounting and I checked hal and dbus and they > are both enabled and to be safe I deinstalled and installed them again > and still does not automount. > > ugen5.2: <HP> at usbus5 > umass0: <HP c310w, class 0/0, rev 2.00/1.00, addr 2> on usbus5 > umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000 > umass0:2:0:-1: Attached to scbus2 > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 > da0: <HP c310w 1.00> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: 3819MB (7823296 512 byte sectors: 255H 63S/T 486C) > > > [olivares@grullahighschool ~]$ ls /media/.hal-mtab > /media/.hal-mtab > > [olivares@grullahighschool ~]$ cat /usr/local/etc/PolicyKit/PolicyKit.con= f > <?xml version=3D"1.0" encoding=3D"UTF-8"?> <!-- -*- XML -*- --> > > <!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.= 0//EN" > "http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">; > > <!-- See the manual page PolicyKit.conf(5) for file format --> > > <config version=3D"0.1"> > =A0 =A0 =A0 =A0<define_admin_auth group=3D"operator"/> > =A0 =A0 =A0 =A0 =A0<match action=3D"org.freedesktop.hal.storage.mount-rem= ovable"> > =A0 =A0 =A0 =A0 =A0 =A0<return result=3D"yes"/> > =A0 =A0 =A0 =A0 =A0</match> > =A0 =A0 =A0 =A0 =A0<match action=3D"org.freedesktop.hal.storage.mount-fix= ed"> > =A0 =A0 =A0 =A0 =A0 =A0<return result=3D"yes"/> > =A0 =A0 =A0 =A0 =A0</match> > =A0 =A0 =A0 =A0 =A0<match action=3D"org.freedesktop.hal.storage.eject"> > =A0 =A0 =A0 =A0 =A0 =A0<return result=3D"yes"/> > =A0 =A0 =A0 =A0 =A0</match> > </config> > > Thank you for any pointers/advice/suggestions. > > Regards, > > Antonio > Dear folks, I am trying out several things and reading and I have found several sites: http://gezeiten.org/post/2011/01/Xfce-4.8-on-BSD-flavors http://www.unix.com/unix-dummies-questions-answers/117249-using-usb-sticks-= freebsd.html http://forums.freebsd.org/showthread.php?t=3D19410 Have not found any relevant information. Installed automounter from ports in sysutils/automount but still does not work. dbus and hald are enabled and installed. I just like the convenience of using automounting. If it is not going to be working, then I am fine with it. Thanks, Antonio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTikPyLd0rT6SVqxb%2BT=HZBW61e5bFQ>