From owner-freebsd-scsi Mon Mar 29 15:57:25 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from loki.iss.net (loki.iss.net [208.21.0.3]) by hub.freebsd.org (Postfix) with ESMTP id 0A72A15971 for ; Mon, 29 Mar 1999 15:57:17 -0800 (PST) (envelope-from rmooney@iss.net) Received: from arden.iss.net (IDENT:rmooney@arden.iss.net [208.21.0.8]) by loki.iss.net (8.9.3/8.9.3) with SMTP id SAA01496 for ; Mon, 29 Mar 1999 18:55:25 -0500 Date: Mon, 29 Mar 1999 18:56:54 -0500 (EST) From: Robert Mooney To: freebsd-scsi@freebsd.org Subject: 3.1-STABLE + Amanda + HP T4000 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I realize this was a topic of discussion earlier this month -- unfortunately, I wasn't actually on the SCSI list, and the archives don't seem to point to any resolution of the issue. Here's a repost of the question I had sent to freebsd-questions: ---------- Forwarded message ---------- Date: Sun, 28 Mar 1999 23:09:53 -0500 (EST) From: Robert Mooney To: freebsd-questions@freebsd.org Subject: 3.1-STABLE + Amanda + HP T4000 The system is running 3.1-STABLE w/ Amanda 2.4.1p1. While attempting to write a label to a TR4 (travan 4gb native) tape, I received the following error: Mar 28 21:14:45 earthtone /kernel: (sa0:ahc0:0:1:0): SPACE. CDB: 11 1 ff ff ff 0 Mar 28 21:14:45 earthtone /kernel: (sa0:ahc0:0:1:0): ILLEGAL REQUEST asc:2c,0 Mar 28 21:14:45 earthtone /kernel: (sa0:ahc0:0:1:0): Command sequence error Mar 28 21:14:45 earthtone /kernel: (sa0:ahc0:0:1:0): unable to backspace over one of double filemarks at EOD- opting for safety Mar 28 21:14:59 earthtone /kernel: (sa0:ahc0:0:1:0): SPACE. CDB: 11 1 ff ff ff 0 Mar 28 21:14:59 earthtone /kernel: (sa0:ahc0:0:1:0): ILLEGAL REQUEST asc:2c,0 Mar 28 21:14:59 earthtone /kernel: (sa0:ahc0:0:1:0): Command sequence error Mar 28 21:14:59 earthtone /kernel: (sa0:ahc0:0:1:0): unable to backspace over one of double filemarks at EOD- opting for safety Unfortunately, after I rebooted once, further attempts to use amlabel resulted in the command hanging (ie, CTRL-C, CTRL-Z, and kill were of no use). The drive is detected as follows: Mar 28 21:57:15 earthtone /kernel: sa0 at ahc0 bus 0 target 1 lun 0 Mar 28 21:57:15 earthtone /kernel: sa0: Removable Sequential Access SCSI-2 device Mar 28 21:57:15 earthtone /kernel: sa0: 3.300MB/s transfers I've done backups using the QIC-3095 (2gb native) tapes under FreeBSD 2.2.7. Unfortunately, the use of a larger tape and newer OS seems to have gotten me in a bind. The machine is stable as of 03/28. If anyone has had success with the T4000 and TR4 tape, please let me know. Thanks in advance, - Rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message