Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Aug 2003 21:13:00 -0600
From:      "Andrew Lankford" <arlankfo@141.com>
To:        <current@freebsd.org>
Cc:        Soren Schmidt <sos@spider.deepcore.dk>
Message-ID:  <200308272113.AA1883570432@141.com>

next in thread | raw e-mail | index | archive | help
------------------------------------------------------------------------
This mail message contains standard MIME attachments.  If you see this
note, your e-mail program does not support MIME.  You may need a MIME-
compliant mail reader to read any non-text attachments in this message.
------------------------------------------------------------------------

--==IMail_v8.0==
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

OK, after checking out Soren's version 1.6 ata-lowlevel.c,
rebuilding the kernel, and rebooting I got the following 
kernel boot message (attached).  The output of "atacontrol list"
is about the same as before as well.  My last build (using
1.4 ata-lowlevel) booted up ok and at least my slave DVDROM
on the secondary channel probed ok.  Now both the master
CDRW device and the DVDROM no longer probe ok.

My last good kernel (pre-ATAng with atapicam enabled) boot is also attached.
 


 
                   

--==IMail_v8.0==
Content-Type: text/plain; name="gooddmesg"
Content-Transfer-Encoding: 7bit


Good pre-ATAng kernel with atapicam:

cam: using minimum scsi_delay (100ms)
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #16: Wed Aug 20 00:06:46 EDT 2003
    root@bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL
Preloaded elf kernel "/boot/kernel.good/kernel" at 0xc046e000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc046e230.
Calibrating clock(s) ... i8254 clock: 1193155 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 737022840 Hz
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 535736320 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000495000 - 0x000000001f5c9fff, 521359360 bytes (127285 pages)
avail memory = 515514368 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f1430
bios32: Entry = 0xf0bf0 (c00f0bf0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdf0
pnpbios: Found PnP BIOS data at 0xc00fc070
pnpbios: Entry = f0000:c0a0  Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   CUSL2   > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1360
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
slot 7    254    0    A   0x60  3 4 5 7 9 10 11 12
slot 7    254    0    B   0x61  3 4 5 7 9 10 11 12
embedded    0    2    A   0x60  3 4 5 7 9 10 11 12
embedded    0   31    A   0x60  3 4 5 7 9 10 11 12
embedded    0   31    B   0x61  3 4 5 7 9 10 11 12
embedded    0   31    C   0x6b  3 4 5 7 9 10 11 12
embedded    0   31    D   0x63  3 4 5 7 9 10 11 12
slot 1      1    9    A   0x69  3 4 5 7 9 10 11 12
slot 1      1    9    B   0x6a  3 4 5 7 9 10 11 12
slot 1      1    9    C   0x6b  3 4 5 7 9 10 11 12
slot 1      1    9    D   0x68  3 4 5 7 9 10 11 12
slot 2      1   10    A   0x6a  3 4 5 7 9 10 11 12
slot 2      1   10    B   0x6b  3 4 5 7 9 10 11 12
slot 2      1   10    C   0x68  3 4 5 7 9 10 11 12
slot 2      1   10    D   0x69  3 4 5 7 9 10 11 12
slot 3      1   11    A   0x6b  3 4 5 7 9 10 11 12
slot 3      1   11    B   0x68  3 4 5 7 9 10 11 12
slot 3      1   11    C   0x69  3 4 5 7 9 10 11 12
slot 3      1   11    D   0x6a  3 4 5 7 9 10 11 12
slot 4      1   12    A   0x68  3 4 5 7 9 10 11 12
slot 4      1   12    B   0x69  3 4 5 7 9 10 11 12
slot 4      1   12    C   0x6a  3 4 5 7 9 10 11 12
slot 4      1   12    D   0x6b  3 4 5 7 9 10 11 12
slot 5      1   13    A   0x69  3 4 5 7 9 10 11 12
slot 5      1   13    B   0x6a  3 4 5 7 9 10 11 12
slot 5      1   13    C   0x6b  3 4 5 7 9 10 11 12
slot 5      1   13    D   0x68  3 4 5 7 9 10 11 12
slot 6      1   14    A   0x62  3 4 5 7 9 10 11 12
slot 6      1   14    B   0x63  3 4 5 7 9 10 11 12
slot 6      1   14    C   0x60  3 4 5 7 9 10 11 12
slot 6      1   14    D   0x61  3 4 5 7 9 10 11 12
embedded    1    8    A   0x68  3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD  min = 3, max = 786, width = 783
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 795, width = 792
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 785, width = 782
ACPI timer looks BAD  min = 3, max = 784, width = 781
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 812, width = 809
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x1130, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base f8000000, size 26, enabled
	map[14]: type 1, range 32, base f7000000, size 19, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1132, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x244e, revid=0x01
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2440, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000b800, size  4, enabled
found->	vendor=0x8086, dev=0x244b, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000b400, size  5, enabled
pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD)
pcib0: slot 31 INTD is routed to irq 9
found->	vendor=0x8086, dev=0x2442, revid=0x01
	bus=0, slot=31, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	map[20]: type 4, range 32, base 0000e800, size  4, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 10
found->	vendor=0x8086, dev=0x2443, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type 4, range 32, base 0000b000, size  5, enabled
pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH)
pcib0: slot 31 INTC is routed to irq 9
found->	vendor=0x8086, dev=0x2444, revid=0x01
	bus=0, slot=31, func=4
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=9
pci0: <display, VGA> at device 2.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xdfff
pcib1:   memory decode     0xf6000000-0xf6ffffff
pcib1:   prefetched decode 0xf7f00000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.8.0
---- before setting priority for links ------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11    12    14    15
	penalty:	  1550  1550   650  1550  1550  2450   750   850  1550 10550 10550
	references:	5
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11    12    14    15
	penalty:	  1550  1550   650  1550  1550  2450   750   850  1550 10550 10550
	references:	5
	priority:	15250
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.8.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 1, range 32, base f6800000, size 12, enabled
pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKF)
pcib1: slot 9 INTA is routed to irq 9
found->	vendor=0x100b, dev=0x0020, revid=0x00
	bus=1, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d400, size  7, enabled
	map[14]: type 1, range 32, base f6000000, size  7, enabled
pcib1: matched entry for 1.12.INTA (source \\_SB_.LNKE)
pcib1: slot 12 INTA is routed to irq 9
found->	vendor=0x10b7, dev=0x9200, revid=0x74
	bus=1, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  6, enabled
pcib1: matched entry for 1.14.INTA (source \\_SB_.LNKC)
pcib1: slot 14 INTA is routed to irq 5
found->	vendor=0x1274, dev=0x5880, revid=0x02
	bus=1, slot=14, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=5
	powerspec 1  supports D0 D2 D3  current D3
pci1: <network, ethernet> at device 9.0 (no driver attached)
pci1: <network, ethernet> at device 12.0 (no driver attached)
pci1: <multimedia, audio> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 31.2 (no driver attached)
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pci0: <serial bus, USB> at device 31.4 (no driver attached)
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 737022840 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
IPv6 packet filtering initialized, default to accept, logging limited to 1 packets/entry
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: success setting UDMA100 on Intel ICH2 chip
ad0: <IBM-DTLA-307030/TX4OA5AA> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on Intel ICH2 chip
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
acd0: <PLEXTOR CD-R PX-W8432T/1.09> CD-RW drive at ata1 as master
acd0: read 5512KB/s (3271KB/s) write 1377KB/s (1377KB/s), 4096KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
ata1-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-slave: success setting PIO4 on Intel ICH2 chip
acd1: <HITACHI DVD-ROM GD-7500/0005> DVD-ROM drive at ata1 as slave
acd1: read 2412KB/s (36026KB/s), 512KB buffer, PIO4
acd1: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd1: Writes:
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: 120mm data disc
(probe2:ata0:0:0:0): CAM Status 0x39
(probe2:ata0:0:0:0): Retrying Command
(probe3:ata0:0:1:0): CAM Status 0x39
(probe3:ata0:0:1:0): Retrying Command
(probe2:ata0:0:0:0): CAM Status 0x39
(probe2:ata0:0:0:0): Retrying Command
(probe3:ata0:0:1:0): CAM Status 0x39
(probe3:ata0:0:1:0): Retrying Command
(probe2:ata0:0:0:0): CAM Status 0x39
(probe2:ata0:0:0:0): Retrying Command
(probe3:ata0:0:1:0): CAM Status 0x39
(probe3:ata0:0:1:0): Retrying Command
(probe2:ata0:0:0:0): CAM Status 0x39
(probe2:ata0:0:0:0): Retrying Command
(probe3:ata0:0:1:0): CAM Status 0x39
(probe3:ata0:0:1:0): Retrying Command
(probe2:ata0:0:0:0): error 5
(probe2:ata0:0:0:0): Retries Exhausted
(probe3:ata0:0:1:0): error 5
(probe3:ata0:0:1:0): Retries Exhausted
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe1:ata1:0:1:0): error 22
(probe1:ata1:0:1:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <PLEXTOR CD-R   PX-W8432T 1.09> Removable CD-ROM SCSI-0 device 
pass0: 16.000MB/s transfers
pass1 at ata1 bus 0 target 1 lun 0
pass1: <HITACHI DVD-ROM GD-7500 0005> Removable CD-ROM SCSI-0 device 
pass1: 16.000MB/s transfers
[0] f:00 typ:7 s(cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R   PX-W8432T 1.09> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: cd present [39180 x 2048 byte records]
CHS):0/1/1 e(CHS):565/8/63 s:63 l:15020712
[1] f:00 typ:12 s(CHS):565/9/1 e(CHS):605/5/63 s:15020775 l:2104515cd1 at ata1 bus 0 target 1 lun 0
cd1: <HITACHI DVD-ROM GD-7500 0005> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers
cd1: cd present [3841168 x 2048 byte records]

[2] f:00 typ:7 s(CHS):605/6/1 e(CHS):106/15/63 s:17125290 l:12916134
[3] f:80 typ:165 s(CHS):107/2/1 e(CHS):167/15/63 s:30041550 l:29994930
GEOM: Configure ad0s1, start 32256 length 7690604544 end 7690636799
GEOM: Configure ad0s2, start 7690636800 length 1077511680 end 8768148479
GEOM: Configure ad0s3, start 8768148480 length 6613060608 end 15381209087
GEOM: Configure ad0s4, start 15381273600 length 15357404160 end 30738677759
GEOM: Configure ad0s4a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s4b, start 209715200 length 1073741824 end 1283457023
GEOM: Configure ad0s4c, start 0 length 15357404160 end 15357404159
GEOM: Configure ad0s4f, start 1283457024 length 209715200 end 1493172223
GEOM: Configure ad0s4g, start 1493172224 length 13864231936 end 15357404159
Mounting root from ufs:/dev/ad0s4a
start_init: trying /sbin/init

--==IMail_v8.0==
Content-Type: text/plain; name="newdmesg"
Content-Transfer-Encoding: 7bit


new ATAng kernel (ata-lowlevel 1.6, no atapicam):

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #20: Wed Aug 27 22:16:12 EDT 2003
    root@bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e2000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04e2228.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04e22d4.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc04e2380.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc04e242c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04e24d8.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04e2584.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc04e2634.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04e26dc.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc04e2784.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e282c.
Calibrating clock(s) ... i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 737022609 Hz
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 535736320 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000509000 - 0x000000001f5c9fff, 520884224 bytes (127169 pages)
avail memory = 515031040 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f1430
bios32: Entry = 0xf0bf0 (c00f0bf0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdf0
pnpbios: Found PnP BIOS data at 0xc00fc070
pnpbios: Entry = f0000:c0a0  Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 
00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01 
00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 
00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 
VESA: 20 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03fdc62 (1000022)
VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   CUSL2   > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1360
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
slot 7    254    0    A   0x60  3 4 5 7 9 10 11 12
slot 7    254    0    B   0x61  3 4 5 7 9 10 11 12
embedded    0    2    A   0x60  3 4 5 7 9 10 11 12
embedded    0   31    A   0x60  3 4 5 7 9 10 11 12
embedded    0   31    B   0x61  3 4 5 7 9 10 11 12
embedded    0   31    C   0x6b  3 4 5 7 9 10 11 12
embedded    0   31    D   0x63  3 4 5 7 9 10 11 12
slot 1      1    9    A   0x69  3 4 5 7 9 10 11 12
slot 1      1    9    B   0x6a  3 4 5 7 9 10 11 12
slot 1      1    9    C   0x6b  3 4 5 7 9 10 11 12
slot 1      1    9    D   0x68  3 4 5 7 9 10 11 12
slot 2      1   10    A   0x6a  3 4 5 7 9 10 11 12
slot 2      1   10    B   0x6b  3 4 5 7 9 10 11 12
slot 2      1   10    C   0x68  3 4 5 7 9 10 11 12
slot 2      1   10    D   0x69  3 4 5 7 9 10 11 12
slot 3      1   11    A   0x6b  3 4 5 7 9 10 11 12
slot 3      1   11    B   0x68  3 4 5 7 9 10 11 12
slot 3      1   11    C   0x69  3 4 5 7 9 10 11 12
slot 3      1   11    D   0x6a  3 4 5 7 9 10 11 12
slot 4      1   12    A   0x68  3 4 5 7 9 10 11 12
slot 4      1   12    B   0x69  3 4 5 7 9 10 11 12
slot 4      1   12    C   0x6a  3 4 5 7 9 10 11 12
slot 4      1   12    D   0x6b  3 4 5 7 9 10 11 12
slot 5      1   13    A   0x69  3 4 5 7 9 10 11 12
slot 5      1   13    B   0x6a  3 4 5 7 9 10 11 12
slot 5      1   13    C   0x6b  3 4 5 7 9 10 11 12
slot 5      1   13    D   0x68  3 4 5 7 9 10 11 12
slot 6      1   14    A   0x62  3 4 5 7 9 10 11 12
slot 6      1   14    B   0x63  3 4 5 7 9 10 11 12
slot 6      1   14    C   0x60  3 4 5 7 9 10 11 12
slot 6      1   14    D   0x61  3 4 5 7 9 10 11 12
embedded    1    8    A   0x68  3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 783, width = 780
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 790, width = 787
ACPI timer looks BAD  min = 3, max = 689, width = 686
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD  min = 3, max = 782, width = 779
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 0.31.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x1130, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base f8000000, size 26, enabled
	map[14]: type 1, range 32, base f7000000, size 19, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1132, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x244e, revid=0x01
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2440, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000b800, size  4, enabled
found->	vendor=0x8086, dev=0x244b, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000b400, size  5, enabled
pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD)
pcib0: slot 31 INTD is routed to irq 9
found->	vendor=0x8086, dev=0x2442, revid=0x01
	bus=0, slot=31, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	map[20]: type 4, range 32, base 0000e800, size  4, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 10
found->	vendor=0x8086, dev=0x2443, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type 4, range 32, base 0000b000, size  5, enabled
pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH)
pcib0: slot 31 INTC is routed to irq 9
found->	vendor=0x8086, dev=0x2444, revid=0x01
	bus=0, slot=31, func=4
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=9
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xdfff
pcib1:   memory decode     0xf6000000-0xf6ffffff
pcib1:   prefetched decode 0xf7f00000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.8.0
---- before setting priority for links ------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11    12    14    15
	penalty:	  1550  1550   650  1550  1550  2450   750   850  1550 10550 10550
	references:	5
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11    12    14    15
	penalty:	  1550  1550   650  1550  1550  2450   750   850  1550 10550 10550
	references:	5
	priority:	15250
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq   5: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq  10: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq   9: [  3  4  5  6  7  9 10 11 12 14 15] low,level,sharable 1.8.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 1, range 32, base f6800000, size 12, enabled
pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKF)
pcib1: slot 9 INTA is routed to irq 9
found->	vendor=0x100b, dev=0x0020, revid=0x00
	bus=1, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d400, size  7, enabled
	map[14]: type 1, range 32, base f6000000, size  7, enabled
pcib1: matched entry for 1.12.INTA (source \\_SB_.LNKE)
pcib1: slot 12 INTA is routed to irq 9
found->	vendor=0x10b7, dev=0x9200, revid=0x74
	bus=1, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  6, enabled
pcib1: matched entry for 1.14.INTA (source \\_SB_.LNKC)
pcib1: slot 14 INTA is routed to irq 5
found->	vendor=0x1274, dev=0x5880, revid=0x02
	bus=1, slot=14, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=5
	powerspec 1  supports D0 D2 D3  current D3
sis0: <NatSemi DP83815 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 9 at device 9.0 on pci1
pcib1: device sis0 requested decoded I/O range 0xd800-0xd8ff
sis0: Ethernet address: 00:02:e3:1c:cf:9e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1
pcib1: device xl0 requested decoded memory range 0xf6000000-0xf600007f
xl0: using memory mapped I/O
xl0: Ethernet address: 00:01:02:73:ee:49
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 5 at device 14.0 on pci1
pcib1: device pcm0 requested decoded I/O range 0xd000-0xd03f
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 6e1000, 1000; 0xc404d000 -> 6e1000
pcm0: sndbuf_setmap 6ff000, 1000; 0xc404b000 -> 6ff000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI 00 00
ata0-master: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=00
ata1-slave: ATA 01 a5
ata1: devices=06
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 737022609 Hz quality 800
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 1 packets/entry
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH2 chip
ad0: <IBM-DTLA-307030/TX4OA5AA> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED>
ata1-master: pio=0x08 wdma=0x22 udma=0xffffffff cable=80pin
ata1: spurious interrupt - status=0x58 error=0x01 reason=0x02
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):565/8/63 s:63 l:15020712
[1] f:00 typ:12 s(CHS):565/9/1 e(CHS):605/5/63 s:15020775 l:2104515
[2] f:00 typ:7 s(CHS):605/6/1 e(CHS):106/15/63 s:17125290 l:12916134
[3] f:80 typ:165 s(CHS):107/2/1 e(CHS):167/15/63 s:30041550 l:29994930
GEOM: Configure ad0s1, start 32256 length 7690604544 end 7690636799
GEOM: Configure ad0s2, start 7690636800 length 1077511680 end 8768148479
GEOM: Configure ad0s3, start 8768148480 length 6613060608 end 15381209087
GEOM: Configure ad0s4, start 15381273600 length 15357404160 end 30738677759
GEOM: Configure ad0s4a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s4b, start 209715200 length 1073741824 end 1283457023
GEOM: Configure ad0s4c, start 0 length 15357404160 end 15357404159
GEOM: Configure ad0s4f, start 1283457024 length 209715200 end 1493172223
GEOM: Configure ad0s4g, start 1493172224 length 13864231936 end 15357404159
Mounting root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
tun0: bpf attached
splash: image decoder found: green_saver
Linux ELF exec handler installed

# atacontrol list

ATA channel 0:
    Master:  ad0 <IBM-DTLA-307030/TX4OA5AA> ATA/ATAPI rev 5
    Slave:       no device present
ATA channel 1:
    Master:      <ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ/ÿ ÿ ÿ ÿ> ATA/ATAPI rev 15
    Slave:       no device present


--==IMail_v8.0==--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308272113.AA1883570432>