Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 24 May 2005 12:10:14 -0500
From:      "Fafa Hafiz Krantz" <fteg@london.com>
To:        questions@freebsd.org
Subject:   Files corrupt after copy!!!
Message-ID:  <20050524171015.396DC1F50B1@ws1-2.us4.outblaze.com>

next in thread | raw e-mail | index | archive | help

Hey!

I just copied my entire "home" directory from my Windows XP harddrive (ad6)
running NTFS over to my FreeBSD harddrive (ad4) running UFS2:

ad4: 152627MB <ST3160023AS/3.20> [310101/16/63] at ata2-master SATA150
ad6: 152627MB <ST3160023AS/3.20> [310101/16/63] at ata3-master SATA150

But when I go through my MP3 files, they're full of skips.
And the simple file verification (SFV) file states:

talvin_singh_-_traveller_(kid_locos_once_upon_a_time_in_the_east_mix).mp3 :=
 crc does not match (8f84cd1d!=3D85d34bd8)

All I did to copy was a cp -Rv /mnt/fafa /usr/home/fafa, and it displayed n=
o errors
while copying. How can this be, my harddrives are new!

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #5: Wed May 18 12:52:43 CEST 2005
    fafa@urban.bleed.lan:/usr/obj/usr/src/sys/URBAN
MPTable: <COMPAQ               >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf34  Stepping =3D 4
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  =3D 1073610752 (1023 MB)
avail memory =3D 1045262336 (996 MB)
ioapic0: Changing APIC ID to 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 28.0 on pci0
pci32: <PCI bus> on pcib2
pcib3: <MPTable PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci64: <PCI bus> on pcib3
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xf0400000-=
0xf040ffff irq 17 at device 0.0 on pci64
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000b=
aseTX-FDX, auto
bge0: Ethernet address: 00:11:85:df:7d:9b
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x4440-0x=
445f irq 20 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x4460-0x=
447f irq 18 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x4480-0x=
449f irq 21 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x44a0-0x=
44bf irq 22 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib4
pci5: <multimedia, audio> at device 4.0 (no driver attached)
pci5: <input device> at device 4.1 (no driver attached)
pci5: <simple comms> at device 9.0 (no driver attached)
fwohci0: <Lucent FW322/323> mem 0xf0a00000-0xf0a00fff irq 22 at device 11.0=
 on pci5
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:00:d1:00:80:77:cd:a9
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x44e0-0x44ef,0x376,0x170-0x1=
77,0x3f6,0x1f0-0x1f7 irq 17 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0x44f0-0x44ff,0x482c-0x482f,0=
x4818-0x481f,0x4828-0x482b,0x4810-0x4817 irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pnpbios: error 0/82 getting device count/size limit
orm0: <ISA Option ROMs> at iomem 0xce000-0xcffff,0xcd000-0xcdfff,0xc0000-0x=
ccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ulpt0: hp photosmart 7700 series, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
umass0: hp photosmart 7700 series, rev 2.00/1.00, addr 2
ukbd0: Chicony Compaq Wireless HID Receiver, rev 1.10/2.10, addr 3, iclass =
3/1
kbd1 at ukbd0
uhid0: Chicony Compaq Wireless HID Receiver, rev 1.10/2.10, addr 3, iclass =
3/1
ums0: Chicony Compaq Wireless HID Receiver, rev 1.10/2.10, addr 3, iclass 3=
/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 3192016368 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0B15> at ata0-master PIO4
acd1: DVDR <HP DVD Writer 630/AH26> at ata0-slave PIO4
ad4: 152627MB <ST3160023AS/3.20> [310101/16/63] at ata2-master SATA150
ad6: 152627MB <ST3160023AS/3.20> [310101/16/63] at ata3-master SATA150
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDR8163B 0B15> Removable CD-ROM SCSI-0 device=20
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <HP DVD Writer 630c AH26> Removable CD-ROM SCSI-0 device=20
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HP photosmart 7700 1.00> Removable Direct Access SCSI-2 device=20
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad4s1a

Thanks!

--

Fafa Hafiz Krantz
  Research Designer @ http://www.home.no/barbershop
  Enlightened @ http://www.home.no/barbershop/smart/sharon.pdf



--=20
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050524171015.396DC1F50B1>