Date: Sun, 13 Oct 2002 16:07:00 -0400 From: Roger Savard <Unix@henoc.com> To: Ian Dowse <iedowse@maths.tcd.ie> Cc: freebsd-stable@freebsd.org Subject: Re: 4,7 Kernel panic Message-ID: <200210131607.00448.Unix@henoc.com> In-Reply-To: <200210132014.aa67467@salmon.maths.tcd.ie> References: <200210132014.aa67467@salmon.maths.tcd.ie>
next in thread | previous in thread | raw e-mail | index | archive | help
On October 13, 2002 03:14 pm, Ian Dowse wrote: > In message <200210131410.30799.Unix@henoc.com>, Roger Savard writes: > >Even with the latest : > > > >nexus_print_all_ressources(... > > That is the other 4.7 problem that people have been reporting > recently, but only on some hardware. You could try reverting John > Baldwin's latest change to src/sys/i386/i386/nexus.c by grabbing > version 1.26.2.6 of that file from > > =09http://www.freebsd.org/cgi/cvsweb.cgi/~checkout~/src/sys/i386/i386/n= exus.c >?rev=3D1.26.2.6 > > Ian Yep, it works for me , reverting back nexus.c dit it. %uname -a FreeBSD freebee.henocoffice.com 4.7-STABLE FreeBSD 4.7-STABLE #7: Sun Oct= 13=20 15:49:03 EDT 2002 =20 root@freebee.henocoffice.com:/data/obj/.amd_mnt/haydn/host/usr/src/sys/Th= eMatrix =20 i386 Here is my /var/run/dmesg.boot file: syncing disks... 2 1=20 done Uptime: 7m7s Rebooting... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #7: Sun Oct 13 15:49:03 EDT 2002 =20 root@freebee.henocoffice.com:/data/obj/.amd_mnt/haydn/host/usr/src/sys/Th= eMatrix Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (745.25-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10 =20 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 266862592 (260608K bytes) avail memory =3D 253816832 (247868K bytes) Preloaded elf kernel "kernel" at 0xc05a0000. Preloaded elf module "splash_bmp.ko" at 0xc05a009c. Preloaded splash_image_data "/boot/splash.bmp" at 0xc05a0140. Preloaded elf module "linux.ko" at 0xc05a0190. Preloaded elf module "snd_ich.ko" at 0xc05a0230. Preloaded elf module "snd_pcm.ko" at 0xc05a02d0. Preloaded elf module "usb.ko" at 0xc05a0370. Preloaded elf module "umass.ko" at 0xc05a040c. Preloaded elf module "agp.ko" at 0xc05a04ac. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem=20 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 2.0 on pci0 pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D2448)> at device 30.0 o= n pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=3D0x104c, dev=3D0x8021) at 0.0 irq 9 pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 2.0 on pci1 pcic0: PCI Memory allocated: 0x88000000 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4104000-0xf4104f= ff=20 irq 9 at device 8.0 on pci1 fxp0: Ethernet address 08:00:46:40:c3:b4 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=3D8086 device=3D244c)> at device 31.0 o= n pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1= on=20 pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f= irq=20 9 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2443) at 31.3 irq 9 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f= irq=20 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 pcm0: <Intel 82801BA (ICH2)> port 0x1880-0x18bf,0x1c00-0x1cff irq 9 at de= vice=20 31.5 on pci0 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2446) at 31.6 irq 9 eisa0: <EISA bus> on motherboard eisa0: unknown card @H@0000 (0x01000000) at slot 1 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff,0xdc000-0xdf= fff=20 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 IP packet filtering initialized, divert enabled, rule-based forwarding=20 enabled, default to accept, unlimited logging ad0: 14403MB <TOSHIBA MK1517GAP> [29264/16/63] at ata0-master UDMA100 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present Mounting root from ufs:/dev/ad0s1a Thanks again. Great crowd. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210131607.00448.Unix>