Date: Wed, 06 Jul 2005 13:54:42 -0400 From: Mike Tancsa <mike@sentex.net> To: Scott Long <scottl@samsco.org> Cc: freebsd-current@freebsd.org Subject: Re: 6.0-CURRENT SNAP004 hangs on amr (long) Message-ID: <6.2.1.2.0.20050706134748.07ca1ab8@64.7.153.2> In-Reply-To: <6.2.1.2.0.20050706115824.07a58588@64.7.153.2> References: <70e8236f05070208212e36c375@mail.gmail.com> <42C6DA5F.9070303@gneto.com> <6.2.1.2.0.20050703212843.07889088@64.7.153.2> <20050705011650.R80892@lexi.siliconlandmark.com> <70e8236f050706002655cd9a0c@mail.gmail.com> <42CBE7F4.9040106@samsco.org> <83fb4207210a3f028b8ee2d2289573c4@xcllnt.net> <42CBFC36.1040406@samsco.org> <6.2.1.2.0.20050706115146.07a59d08@64.7.153.2> <6.2.1.2.0.20050706115824.07a58588@64.7.153.2>
next in thread | previous in thread | raw e-mail | index | archive | help
At 12:23 PM 06/07/2005, Mike Tancsa wrote:
>At 11:53 AM 06/07/2005, Mike Tancsa wrote:
>>At 11:43 AM 06/07/2005, Scott Long wrote:
>>
>>>According to the original dmesg, the hang happens well after bus
>>>enumeration is complete and interrupts have been enabled. It's
>>>happening on a taste I/O from GEOM.
>>
>>Here is a boot -v that is a little more upto date. I am just netbooting
>>with various kernel configs to try and sort out whats going on.
And here is the box booting up with RELENG_5 off the disk. I did at one
point install HEAD on the disk, but it was the same behaviour as I see with
a netboot.
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=01 base=0000000000100000 len=000000007fefe000
SMAP type=02 base=000000007fffe000 len=0000000000002000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000010000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Thu Jun 30 19:15:07 EDT 2005
mdtancsa@hippo.sentex.ca:/usr/obj/usr/src/sys/hippo
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08be000.
Calibrating clock(s) ... i8254 clock: 1193226 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 500019284 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147475456 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000007dbcdfff, 2096783360 bytes (511910 pages)
avail memory = 2096033792 (1998 MB)
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MPTable enumerator.
SMP: Added CPU 3 (BSP)
SMP: Added CPU 0 (AP)
SMP: Added CPU 1 (AP)
SMP: Added CPU 2 (AP)
MPTable: <DELL PowerEdge 83>
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
cpu2 (AP): APIC ID: 1
cpu3 (AP): APIC ID: 2
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xcc4e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
ioapic0: Changing APIC ID to 4
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 bus ISA
ioapic0: intpin 9 trigger: edge
ioapic0: intpin 9 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 20 bus PCI
ioapic0: intpin 20 trigger: level
ioapic0: intpin 20 polarity: low
ioapic0: intpin 20 bus PCI
ioapic0: intpin 20 trigger: level
ioapic0: intpin 20 polarity: low
ioapic0: intpin 20 bus PCI
ioapic0: intpin 20 trigger: level
ioapic0: intpin 20 polarity: low
ioapic0: intpin 20 bus PCI
ioapic0: intpin 20 trigger: level
ioapic0: intpin 20 polarity: low
ioapic0: intpin 21 bus PCI
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 22 bus PCI
ioapic0: intpin 22 trigger: level
ioapic0: intpin 22 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: active-high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: active-high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040011 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 2 [class=060100] [hdr=80] is there (id=71108086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fc7a0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x64 14
embedded 0 2 B 0x65 15
embedded 0 2 D 0x63 3 4 5 6 7 10 11 12 14
embedded 1 4 A 0x65 3 4 5 6 7 10 11 12 14
embedded 1 6 A 0x66 3 4 5 6 7 10 11 12 14
embedded 1 8 A 0x64 3 4 5 6 7 10 11 12 14
slot 1 0 6 A 0x69 3 4 5 6 7 10 11 12 14
slot 1 0 6 B 0x64 3 4 5 6 7 10 11 12 14
slot 1 0 6 C 0x67 3 4 5 6 7 10 11 12 14
slot 1 0 6 D 0x68 3 4 5 6 7 10 11 12 14
slot 2 0 8 A 0x68 3 4 5 6 7 10 11 12 14
slot 2 0 8 B 0x69 3 4 5 6 7 10 11 12 14
slot 2 0 8 C 0x64 3 4 5 6 7 10 11 12 14
slot 2 0 8 D 0x67 3 4 5 6 7 10 11 12 14
slot 3 0 10 A 0x67 3 4 5 6 7 10 11 12 14
slot 3 0 10 B 0x68 3 4 5 6 7 10 11 12 14
slot 3 0 10 C 0x69 3 4 5 6 7 10 11 12 14
slot 3 0 10 D 0x64 3 4 5 6 7 10 11 12 14
slot 4 2 1 A 0x63 3 4 5 6 7 10 11 12 14
slot 4 2 1 B 0x60 3 4 5 6 7 10 11 12 14
slot 4 2 1 C 0x61 3 4 5 6 7 10 11 12 14
slot 4 2 1 D 0x62 3 4 5 6 7 10 11 12 14
slot 5 2 3 A 0x62 3 4 5 6 7 10 11 12 14
slot 5 2 3 B 0x63 3 4 5 6 7 10 11 12 14
slot 5 2 3 C 0x60 3 4 5 6 7 10 11 12 14
slot 5 2 3 D 0x61 3 4 5 6 7 10 11 12 14
slot 6 2 5 A 0x61 3 4 5 6 7 10 11 12 14
slot 6 2 5 B 0x62 3 4 5 6 7 10 11 12 14
slot 6 2 5 C 0x63 3 4 5 6 7 10 11 12 14
slot 6 2 5 D 0x60 3 4 5 6 7 10 11 12 14
slot 7 2 7 A 0x60 3 4 5 6 7 10 11 12 14
slot 7 2 7 B 0x61 3 4 5 6 7 10 11 12 14
slot 7 2 7 C 0x62 3 4 5 6 7 10 11 12 14
slot 7 2 7 D 0x63 3 4 5 6 7 10 11 12 14
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00000000, size 4, port disabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=2, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00000000, size 5, port disabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=2, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
map[90]: type 4, range 32, base 00000850, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=2, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base ee000000, size 24, enabled
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
map[18]: type 1, range 32, base eff00000, size 12, enabled
found-> vendor=0x1002, dev=0x4749, revid=0x5c
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x00a7, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84ca, revid=0x03
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x02
bus=0, slot=18, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x02
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x02
bus=0, slot=20, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 2.2 (no driver attached)
piix0: <PIIX Timecounter> port 0x850-0x85f at device 2.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base feb20000, size 17, enabled
map[14]: type 1, range 32, base feb00000, size 17, enabled
map[18]: type 4, range 32, base 0000ecc0, size 6, enabled
pcib2: slot 3 INTA routed to irq 18
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0xb154, revid=0x00
bus=2, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xecc0-0xecff mem 0xfeb00000-0xfeb1ffff,0xfeb20000-0xfeb3ffff ir2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeb20000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xecc0
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:5d:f8:ca
em0: Speed:N/A Duplex:N/A
pcib3: <MPTable PCI-PCI bridge> at device 7.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 4
pcib3: I/O decode 0xf000-0xffff
pcib3: memory decode 0xfe800000-0xfeafffff
pcib3: prefetched decode 0xf0000000-0xf7ffffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0xb154, revid=0x00
bus=3, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000fc00, size 8, enabled
pcib3: device (null) requested decoded I/O range 0xfc00-0xfcff
map[14]: type 1, range 32, base fe8ff000, size 12, enabled
pcib3: device (null) requested decoded memory range 0xfe8ff000-0xfe8fffff
pcib3: slot 1 INTA routed to irq 17
found-> vendor=0x1077, dev=0x1216, revid=0x06
bus=3, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
powerspec 1 supports D0 D3 current D0
pcib4: <MPTable PCI-PCI bridge> at device 0.0 on pci3
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfea00000-0xfeafffff
pcib4: prefetched decode 0xf0000000-0xf7ffffff
pci4: <PCI bus> on pcib4
pci4: physical bus=4
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib4: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
pcib3: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
pcib4: slot 0 INTA routed to irq 16
found-> vendor=0x101e, dev=0x1960, revid=0x20
bus=4, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf7ffffff irq 16 at device
0.0 on pci4
amr0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
amr0: [MPSAFE]
amr0: <LSILogic PERC 3/DC> Firmware 161J, BIOS 3.17, 128MB RAM
pci3: <mass storage, SCSI> at device 1.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
pnpbios: 16 devices, largest 179 bytes
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c02: adding fixed memory32 range 0x100000-0x7fffffff, size=0x7ff00000
PNP0c02: adding fixed memory32 range 0xff000000-0xffffffff, size=0x1000000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding io range 0x800-0x83f, size=0x40, align=0x1
PNP0c02: adding io range 0x850-0x85f, size=0x10, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0x2c00-0x2c7f, size=0x80, align=0x1
PNP0c02: adding irq mask 0x8000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
pnpbios: handle 1 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
pnpbios: handle 2 device ID PNP0501 (0105d041)
pnpbios: handle 3 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding dma mask 0x4
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 5 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 6 device ID PNP0a03 (030ad041)
PNP0c02: adding irq mask 0x200
pnpbios: handle 7 device ID PNP0c02 (020cd041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 12 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
pnpbios: handle 14 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 15 device ID PNP0c04 (040cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x2001 0x2009 0x2001 0x2001
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x850-0x85f,0x800-0x83f iomem
0xf0000-0xfffff,0xff000000-0xffffffff,0x100000-0x7fffffff,0-0x9ffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
ppc1: parallel port not found.
unknown: <ECP parallel printer port> failed to probe on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is
0x330. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is
0x100. Failing probe.
Device configuration finished.
Reducing kern.maxvnodes 134373 -> 100000
procfs registered
Timecounter "TSC" frequency 500019284 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34556MB (70770688 sectors) RAID 5 (optimal)
GEOM: new disk amrd0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:70766262
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure amrd0s1, start 32256 length 36232326144 end 36232358399
GEOM: Configure amrd0s1a, start 0 length 524288000 end 524287999
GEOM: Configure amrd0s1b, start 524288000 length 4294967296 end 4819255295
GEOM: Configure amrd0s1c, start 0 length 36232326144 end 36232326143
GEOM: Configure amrd0s1d, start 4819255296 length 5368709120 end 10187964415
GEOM: Configure amrd0s1e, start 10187964416 length 1073741824 end 11261706239
GEOM: Configure amrd0s1f, start 11261706240 length 24970619904 end 36232326143
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
(probe2:amr0:0:2:0): error 22
(probe2:amr0:0:2:0): Unretryable Error
(probe1:amr0:0:1:0): error 22
(probe1:amr0:0:1:0): Unretryable Error
(probe0:amr0:0:0:0): error 22
(probe0:amr0:0:0:0): Unretryable Error
(probe16:amr0:1:1:0): error 22
(probe16:amr0:1:1:0): Unretryable Error
(probe7:amr0:0:8:0): error 22
(probe7:amr0:0:8:0): Unretryable Error
(probe17:amr0:1:2:0): error 22
(probe17:amr0:1:2:0): Unretryable Error
(probe8:amr0:0:9:0): error 22
(probe8:amr0:0:9:0): Unretryable Error
(probe18:amr0:1:3:0): error 22
(probe18:amr0:1:3:0): Unretryable Error
(probe9:amr0:0:10:0): error 22
(probe9:amr0:0:10:0): Unretryable Error
(probe19:amr0:1:4:0): error 22
(probe19:amr0:1:4:0): Unretryable Error
(probe10:amr0:0:11:0): error 22
(probe10:amr0:0:11:0): Unretryable Error
(probe20:amr0:1:5:0): error 22
(probe20:amr0:1:5:0): Unretryable Error
(probe11:amr0:0:12:0): error 22
(probe11:amr0:0:12:0): Unretryable Error
(probe21:amr0:1:6:0): error 22
(probe21:amr0:1:6:0): Unretryable Error
(probe12:amr0:0:13:0): error 22
(probe12:amr0:0:13:0): Unretryable Error
(probe22:amr0:1:8:0): error 22
(probe22:amr0:1:8:0): Unretryable Error
(probe13:amr0:0:14:0): error 22
(probe13:amr0:0:14:0): Unretryable Error
(probe26:amr0:1:12:0): error 22
(probe26:amr0:1:12:0): Unretryable Error
(probe14:amr0:0:15:0): error 22
(probe14:amr0:0:15:0): Unretryable Error
(probe27:amr0:1:13:0): error 22
(probe27:amr0:1:13:0): Unretryable Error
(probe3:amr0:0:3:0): error 22
(probe3:amr0:0:3:0): Unretryable Error
(probe28:amr0:1:14:0): error 22
(probe28:amr0:1:14:0): Unretryable Error
(probe4:amr0:0:4:0): error 22
(probe4:amr0:0:4:0): Unretryable Error
(probe29:amr0:1:15:0): error 22
(probe29:amr0:1:15:0): Unretryable Error
(probe5:amr0:0:5:0): error 22
(probe5:amr0:0:5:0): Unretryable Error
(probe6:amr0:0:6:0): error 22
(probe6:amr0:0:6:0): Unretryable Error
(probe15:amr0:1:0:0): error 22
(probe15:amr0:1:0:0): Unretryable Error
(probe23:amr0:1:9:0): error 22
(probe23:amr0:1:9:0): Unretryable Error
(probe24:amr0:1:10:0): error 22
(probe24:amr0:1:10:0): Unretryable Error
(probe25:amr0:1:11:0): error 22
(probe25:amr0:1:11:0): Unretryable Error
pass0 at amr0 bus 0 target 6 lun 0
pass0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x02000000 VER: 0x00040011 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
Mounting root from ufs:/dev/amrd0s1a
start_init: trying /sbin/init
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/amrd0s1b as swap device
Starting file system checks:
/dev/amrd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1a: clean, 220341 free (661 frags, 27460 blocks, 0.3% fragmentation)
/dev/amrd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1e: clean, 506481 free (41 frags, 63305 blocks, 0.0% fragmentation)
/dev/amrd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1f: clean, 11257855 free (34775 frags, 1402885 blocks, 0.3%
fragmentation)
/dev/amrd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1d: clean, 2528833 free (369 frags, 316058 blocks, 0.0%
fragmentation)
Setting hostname: hippo.sentex.ca.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
Starting dhclient.
em0: Link is up 1000 Mbps Full Duplex
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet6 fe80::20e:cff:fe5d:f8ca%em0 prefixlen 64 scopeid 0x1
inet 192.168.5.107 netmask 0xffffff00 broadcast 192.168.5.255
ether 00:0e:0c:5d:f8:ca
media: Ethernet autoselect
status: no carrier
Additional routing options: IP gateway=YES.
Starting devd.
Mounting NFS file systems:.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Recovering vi editor sessions:em0: Link is up 1000 Mbps Full Duplex
.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:.
Wed Jul 6 17:51:12 EDT 2005
FreeBSD/i386 (hippo.sentex.ca) (ttyd0)
login:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050706134748.07ca1ab8>