Date: Tue, 19 Jul 2011 11:20:31 -0700 From: "Thomas D. Dean" <tomdean@speakeasy.org> To: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Install 8.2-Release AMD64 on Laptop with Raid0 Message-ID: <1311099631.2262.20.camel@asus>
next in thread | raw e-mail | index | archive | help
I have not used RAID before.
I have a laptop (new to me) with windows 7 and RAID0.
I want to install 8.2-Release and retain the Raid0.
I booted the 8.2-Release AMD64 DVD and exited to Fixit.
pciconf -lv shows
atapci0@pci0:0:31:2: class=0x010400 card=0x159b103c chip=0x282a8086
rev=0x05 hdr=0x00
class= mass storage
subclass=RAID
I attached portions of dmesg below.
sysinstall shows 3 choices for disk drives. ad4(600G), ad6(600G),
ar0(RAID0)
I want to use RAID0 and use the entire disk, partitioned by 'A'.
Which disk do I select for installation?
tomdean
>From dmesg,
ad4: 610480MB <TOSHIBA MK6461GSYN MH000C> at ata2-master UDMA100 SATA
3Gb/s
ad4: 1250263728 sectors [1240341C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: new disk ad4
battery0: battery initialization done, tried 1 times
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.0.00>
checksum 0x18a624f5
config_size 0x000001e0
config_id 0x07e20939
generation 0x00000067
total_disks 2
total_volumes 1
DISK# serial disk_sectors disk_id flags
0 <61ABD08TB> 1250263728 0x00000000 0x0000053a
1 <61ABD08SB> 1250263728 0x00010000 0x0000053a
name RAID-0
total_sectors 2500517888
state 4108
reserved 0
offset 0
disk_sectors 1250259208
stripe_count 19535296
stripe_sectors 64
status 0
type RAID0
total_disks 2
magic[0] 0x01
magic[1] 0xff
magic[2] 0x01
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad6: setting UDMA100
ad6: 610480MB <TOSHIBA MK6461GSYN MH000C> at ata3-master UDMA100 SATA
3Gb/s
ad6: 1250263728 sectors [1240341C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: ad4: partition 4 does not start on a track boundary.
GEOM: ad4: partition 4 does not end on a track boundary.
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not start on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
GEOM: new disk ad6
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.0.00>
checksum 0x18a624f5
config_size 0x000001e0
config_id 0x07e20939
generation 0x00000067
total_disks 2
total_volumes 1
DISK# serial disk_sectors disk_id flags
0 <61ABD08TB> 1250263728 0x00000000 0x0000053a
1 <61ABD08SB> 1250263728 0x00010000 0x0000053a
name RAID-0
total_sectors 2500517888
state 4108
reserved 0
offset 0
disk_sectors 1250259208
stripe_count 19535296
stripe_sectors 64
status 0
type RAID0
total_disks 2
magic[0] 0x01
magic[1] 0xff
magic[2] 0x01
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ata4: Identifying devices: 00010000
ata4: New devices: 00010000
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: setting UDMA100
ata4: device_reset timeout=590us
acd0: <hp BDDVDRW CA30N/EC03> DVDR drive at ata4 as master
acd0: read 10820KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB
buffer, UDMA100 SATA 1.5Gb/s
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: DVD 120mm data disc
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format Intel MatrixRAID
type RAID0
flags 0x01 1<READY>
magic_0 0x0000000007e20939
magic_1 0x0000000000000000
generation 103
total_sectors 2500517888
offset_sectors 0
heads 255
sectors 63
cylinders 155650
width 2
interleave 64
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 1250263728
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 1250263728
=================================================
ar0: 1220956MB <Intel MatrixRAID RAID0 (stripe 32 KB)> status: READY
ar0: 2500517888 sectors [155650C/255H/63S] <RAID-0> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1311099631.2262.20.camel>