Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 27 Aug 1998 03:24:31 +0800
From:      chas <panda@peace.com.my>
To:        freebsd-questions@FreeBSD.ORG
Subject:   SCSI card is killing my NIC.
Message-ID:  <3.0.32.19980827032431.00730aa0@mail.peace.com.my>

next in thread | raw e-mail | index | archive | help
I have a FBSD box which has been running very well on FBSD 2.2.6
I'm now trying to install a first SCSI card to it so that I can
attach a tape drive but whenever the SCSI card is present, all
networking either : (1) dies or (2) slows down to 10000+ ms pings.

I've attached the dmesg output in the hope that someone can spot
what might be the problem. (I know the 3Com 3509 is a bit 
dodgy with FBSD - eg. I need a script to ping out from the box after
any restart otherwise the machine remains invisible to the network !
After this ping, everything works fine... that's been the case with 
all my 3com NICs !). However, adding the SCSI just kills the NIC 
totally - no matter of pinging out gets it out of sloth/zombie mode.

Thanking you in advance,

chas

Dmesg output when SCSI card is present :
----------------------------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

FreeBSD 2.2.6-RELEASE #0: Wed Aug 19 13:25:30 MYT 1998
    chas@freebie.neuronet.com.my:/usr/src/sys/compile/FREEBIEK
CPU: Pentium (166.19-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32768K bytes)
avail memory = 30986240 (30260K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:13:0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:4:0): "WangDAT Model 3400DX 125F" type 1 removable SCSI 2
st0(ahc0:4:0): Sequential-Access density code 0x13,  drive empty
vga0 <VGA-compatible display device> rev 67 int a irq 11 on pci0:16:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 82160D2>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
aha0 not found at 0x330
wt0 not found at 0x300
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: utp[*UTP*] address 00:c0:4f:db:48:d1
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
WARNING: / was not properly dismounted.




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19980827032431.00730aa0>