Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Mar 2008 18:40:02 GMT
From:      "Manjunath R Gowda" <mgowda82@gmail.com>
To:        freebsd-bugs@FreeBSD.org
Subject:   Re: misc/121546: 3ware 9650SE-24M8 JBOD disks not seen
Message-ID:  <200803101840.m2AIe2XS035076@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/121546; it has been noted by GNATS.

From: "Manjunath R Gowda" <mgowda82@gmail.com>
To: "William Taylor" <williamt@sonic.net>
Cc: freebsd-gnats-submit@freebsd.org
Subject: Re: misc/121546: 3ware 9650SE-24M8 JBOD disks not seen
Date: Mon, 10 Mar 2008 11:14:45 -0700

 ------=_Part_14553_12272169.1205172885718
 Content-Type: text/plain; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 By default, If you leave individual drives unconfigured(JBOD), they will not
 be available to the operating system. If you want to be able to use
 individual
 drives, configure them as single-disk units.
 
 -Manjunath
 
 
 
 
 
 On 3/9/08, William Taylor <williamt@sonic.net> wrote:
 >
 >
 > >Number:         121546
 > >Category:       misc
 > >Synopsis:       3ware 9650SE-24M8 JBOD disks not seen
 > >Confidential:   no
 > >Severity:       non-critical
 > >Priority:       low
 > >Responsible:    freebsd-bugs
 > >State:          open
 > >Quarter:
 > >Keywords:
 > >Date-Required:
 > >Class:          sw-bug
 > >Submitter-Id:   current-users
 > >Arrival-Date:   Sun Mar 09 21:00:01 UTC 2008
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     William Taylor
 > >Release:        7.0-STABLE
 > >Organization:
 > Sonic.net
 > >Environment:
 > FreeBSD lds.napanet.net 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun Mar  9
 > 06:00:53 UTC 2008     root@lds.napanet.net
 > :/usr/src/sys/amd64/compile/LDS  amd64
 >
 > >Description:
 > Running FreeBSD 7.0 disks that are exported as JBOD on a 3ware 9650SE-24M8
 > controller (possibly other 3wares too) do not show up in FreeBSD.
 > Raid Arrays created in the controller do show up as da[0-?]
 > Have verified that JBOD disks do show up to CentOS distros w/ same
 > controller.
 >
 > Have tried disabling onboard sata controller on motherboard to see if it
 > makes a difference but it doesn't change anything.
 > dmesg output attached.
 > >How-To-Repeat:
 > Install a 3ware 9650SE-24M8 controller set the controller to export JBOD
 > disks.
 > >Fix:
 >
 >
 > Patch attached with submission follows:
 >
 > lds# dmesg
 > Copyright (c) 1992-2008 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 >        The Regents of the University of California. All rights reserved.
 > FreeBSD is a registered trademark of The FreeBSD Foundation.
 > FreeBSD 7.0-STABLE #0: Sun Mar  9 06:00:53 UTC 2008
 >    root@lds.napanet.net:/usr/src/sys/amd64/compile/LDS
 > Timecounter "i8254" frequency 1193182 Hz quality 0
 > CPU: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz (2333.34-MHz K8-class
 > CPU)
 > Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
 >
 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 >
 > Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
 > AMD Features=0x20100800<SYSCALL,NX,LM>
 > AMD Features2=0x1<LAHF>
 > Cores per package: 4
 > usable memory = 4281757696 (4083 MB)
 > avail memory  = 4120399872 (3929 MB)
 > ACPI APIC Table: <PTLTD          APIC  >
 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 > cpu0 (BSP): APIC ID:  0
 > cpu1 (AP): APIC ID:  1
 > cpu2 (AP): APIC ID:  2
 > cpu3 (AP): APIC ID:  3
 > ioapic0 <Version 2.0> irqs 0-23 on motherboard
 > ioapic1 <Version 2.0> irqs 24-47 on motherboard
 > kbd1 at kbdmux0
 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 > acpi0: <PTLTD   RSDT> on motherboard
 > acpi0: [ITHREAD]
 > acpi0: Power Button (fixed)
 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
 > cpu0: <ACPI CPU> on acpi0
 > est0: <Enhanced SpeedStep Frequency Control> on cpu0
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr 720072006000720
 > device_attach: est0 attach returned 6
 > p4tcc0: <CPU Frequency Thermal Control> on cpu0
 > cpu1: <ACPI CPU> on acpi0
 > est1: <Enhanced SpeedStep Frequency Control> on cpu1
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr 720072006000720
 > device_attach: est1 attach returned 6
 > p4tcc1: <CPU Frequency Thermal Control> on cpu1
 > cpu2: <ACPI CPU> on acpi0
 > est2: <Enhanced SpeedStep Frequency Control> on cpu2
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr 720072006000720
 > device_attach: est2 attach returned 6
 > p4tcc2: <CPU Frequency Thermal Control> on cpu2
 > cpu3: <ACPI CPU> on acpi0
 > est3: <Enhanced SpeedStep Frequency Control> on cpu3
 > est: CPU supports Enhanced Speedstep, but is not recognized.
 > est: cpu_vendor GenuineIntel, msr 720072006000720
 > device_attach: est3 attach returned 6
 > p4tcc3: <CPU Frequency Thermal Control> on cpu3
 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 > pci0: <ACPI PCI bus> on pcib0
 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
 > pci1: <ACPI PCI bus> on pcib1
 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
 > pci2: <ACPI PCI bus> on pcib2
 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
 > pci3: <ACPI PCI bus> on pcib3
 > pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
 > pci4: <ACPI PCI bus> on pcib4
 > pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
 > pci5: <ACPI PCI bus> on pcib5
 > pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
 > pci6: <ACPI PCI bus> on pcib6
 > em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
 > 0x2000-0x201f mem 0xda020000-0xda03ffff,0xda000000-0xda01ffff irq 18 at
 > device 0.0 on pci6
 > em0: Using MSI interrupt
 > em0: Ethernet address: 00:30:48:62:f4:62
 > em0: [FILTER]
 > em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
 > 0x2020-0x203f mem 0xda060000-0xda07ffff,0xda040000-0xda05ffff irq 19 at
 > device 0.1 on pci6
 > em1: Using MSI interrupt
 > em1: Ethernet address: 00:30:48:62:f4:63
 > em1: [FILTER]
 > pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
 > pci7: <ACPI PCI bus> on pcib7
 > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
 > pci8: <ACPI PCI bus> on pcib8
 > pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
 > pci9: <ACPI PCI bus> on pcib9
 > 3ware device driver for 9000 series storage controllers, version:
 > 3.70.05.001
 > twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem
 > 0xd8000000-0xd9ffffff,0xda300000-0xda300fff irq 18 at device 0.0 on pci9
 > twa0: [ITHREAD]
 > twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:
 > twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-24M8, 24
 > ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004
 > pci0: <base peripheral> at device 8.0 (no driver attached)
 > pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 > pci10: <ACPI PCI bus> on pcib10
 > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
 > 0x1800-0x181f irq 17 at device 29.0 on pci0
 > uhci0: [GIANT-LOCKED]
 > uhci0: [ITHREAD]
 > usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
 > usb0: USB revision 1.0
 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 > uhub0: 2 ports with 2 removable, self powered
 > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
 > 0x1820-0x183f irq 19 at device 29.1 on pci0
 > uhci1: [GIANT-LOCKED]
 > uhci1: [ITHREAD]
 > usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
 > usb1: USB revision 1.0
 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 > uhub1: 2 ports with 2 removable, self powered
 > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
 > 0x1840-0x185f irq 18 at device 29.2 on pci0
 > uhci2: [GIANT-LOCKED]
 > uhci2: [ITHREAD]
 > usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
 > usb2: USB revision 1.0
 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 > uhub2: 2 ports with 2 removable, self powered
 > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xda600000-0xda6003ff irq 17
 > at device 29.7 on pci0
 > ehci0: [GIANT-LOCKED]
 > ehci0: [ITHREAD]
 > usb3: EHCI version 1.0
 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 > usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
 > usb3: USB revision 2.0
 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
 > uhub3: 6 ports with 6 removable, self powered
 > pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 > pci11: <ACPI PCI bus> on pcib11
 > vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem
 > 0xd0000000-0xd7ffffff,0xda200000-0xda20ffff irq 18 at device 1.0 on pci11
 > isab0: <PCI-ISA bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci0: <Intel 63XXESB2 UDMA100 controller> port
 > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
 > ata0: <ATA channel 0> on atapci0
 > ata0: [ITHREAD]
 > ata1: <ATA channel 1> on atapci0
 > ata1: [ITHREAD]
 > atapci1: <Intel AHCI controller> port
 > 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem
 > 0xda600400-0xda6007ff irq 19 at device 31.2 on pci0
 > atapci1: [ITHREAD]
 > atapci1: AHCI Version 01.10 controller with 6 ports detected
 > ata2: <ATA channel 0> on atapci1
 > ata2: [ITHREAD]
 > ata3: <ATA channel 1> on atapci1
 > ata3: [ITHREAD]
 > ata4: <ATA channel 2> on atapci1
 > ata4: [ITHREAD]
 > ata5: <ATA channel 3> on atapci1
 > ata5: [ITHREAD]
 > ata6: <ATA channel 4> on atapci1
 > ata6: [ITHREAD]
 > ata7: <ATA channel 5> on atapci1
 > ata7: [ITHREAD]
 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 > acpi_button0: <Power Button> on acpi0
 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 > atkbd0: <AT Keyboard> irq 1 on atkbdc0
 > kbd0 at atkbd0
 > atkbd0: [GIANT-LOCKED]
 > atkbd0: [ITHREAD]
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: configured irq 4 not in bitmap of probed irqs 0
 > sio0: port may not be enabled
 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 > acpi0
 > sio0: type 16550A
 > sio0: [FILTER]
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > sio1: configured irq 3 not in bitmap of probed irqs 0
 > sio1: port may not be enabled
 > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
 > sio1: type 16550A
 > sio1: [FILTER]
 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
 > acpi0
 > fdc0: [FILTER]
 > ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 > ppc0: FIFO with 16/16/9 bytes threshold
 > ppbus0: <Parallel port bus> on ppc0
 > ppbus0: [ITHREAD]
 > plip0: <PLIP network interface> on ppbus0
 > lpt0: <Printer> on ppbus0
 > lpt0: Interrupt-driven port
 > ppi0: <Parallel I/O> on ppbus0
 > ppc0: [GIANT-LOCKED]
 > ppc0: [ITHREAD]
 > orm0: <ISA Option ROMs> at iomem
 > 0xc0000-0xcafff,0xcb000-0xccfff,0xcd000-0xcefff on isa0
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > Timecounters tick every 1.000 msec
 > ad4: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata2-master SATA300
 > ad6: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata3-master SATA300
 > ad8: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata4-master SATA300
 > ad10: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata5-master SATA300
 > ad12: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata6-master SATA300
 > ad14: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata7-master SATA300
 > SMP: AP CPU #1 Launched!
 > SMP: AP CPU #3 Launched!
 > SMP: AP CPU #2 Launched!
 > da0 at twa0 bus 0 target 0 lun 0
 > da0: <AMCC 9650SE-24M DISK 3.08> Fixed Direct Access SCSI-5 device
 > da0: 100.000MB/s transfers
 > da0: 5721984MB (11718623232 512 byte sectors: 255H 63S/T 729450C)
 > Trying to mount root from ufs:/dev/ad4s1a
 > em0: link state changed to UP
 > twa0: INFO: (0x04: 0x000C): Initialize started: unit=0
 >
 >
 > >Release-Note:
 > >Audit-Trail:
 > >Unformatted:
 > _______________________________________________
 > freebsd-bugs@freebsd.org mailing list
 > http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
 > To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org"
 >
 
 ------=_Part_14553_12272169.1205172885718
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 <div>&nbsp;</div>
 <div>By default, If you leave individual drives unconfigured(JBOD), they will not</div>
 <div>be available to the operating system. If you want to be able to use individual </div>
 <div>drives, configure them as single-disk units.</div>
 <div>&nbsp;</div>
 <div>-Manjunath</div>
 <div>&nbsp;</div>
 <div>&nbsp;</div>
 <div><br><br>&nbsp;</div>
 <div><span class="gmail_quote">On 3/9/08, <b class="gmail_sendername">William Taylor</b> &lt;<a href="mailto:williamt@sonic.net">williamt@sonic.net</a>&gt; wrote:</span>
 <blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"><br>&gt;Number:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 121546<br>&gt;Category:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; misc<br>&gt;Synopsis:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 3ware 9650SE-24M8 JBOD disks not seen<br>
 &gt;Confidential:&nbsp;&nbsp; no<br>&gt;Severity:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; non-critical<br>&gt;Priority:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; low<br>&gt;Responsible:&nbsp;&nbsp;&nbsp;&nbsp;freebsd-bugs<br>&gt;State:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;open<br>&gt;Quarter:<br>&gt;Keywords:<br>&gt;Date-Required:<br>&gt;Class:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;sw-bug<br>
 &gt;Submitter-Id:&nbsp;&nbsp; current-users<br>&gt;Arrival-Date:&nbsp;&nbsp; Sun Mar 09 21:00:01 UTC 2008<br>&gt;Closed-Date:<br>&gt;Last-Modified:<br>&gt;Originator:&nbsp;&nbsp;&nbsp;&nbsp; William Taylor<br>&gt;Release:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;7.0-STABLE<br>&gt;Organization:<br>
 <a href="http://Sonic.net">Sonic.net</a><br>&gt;Environment:<br>FreeBSD <a href="http://lds.napanet.net">lds.napanet.net</a>; 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun Mar&nbsp;&nbsp;9 06:00:53 UTC 2008&nbsp;&nbsp;&nbsp;&nbsp; root@lds.napanet.net:/usr/src/sys/amd64/compile/LDS&nbsp;&nbsp;amd64<br>
 <br>&gt;Description:<br>Running FreeBSD 7.0 disks that are exported as JBOD on a 3ware 9650SE-24M8 controller (possibly other 3wares too) do not show up in FreeBSD.<br>Raid Arrays created in the controller do show up as da[0-?]<br>
 Have verified that JBOD disks do show up to CentOS distros w/ same controller.<br><br>Have tried disabling onboard sata controller on motherboard to see if it makes a difference but it doesn&#39;t change anything.<br>dmesg output attached.<br>
 &gt;How-To-Repeat:<br>Install a 3ware 9650SE-24M8 controller set the controller to export JBOD disks.<br>&gt;Fix:<br><br><br>Patch attached with submission follows:<br><br>lds# dmesg<br>Copyright (c) 1992-2008 The FreeBSD Project.<br>
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The Regents of the University of California. All rights reserved.<br>FreeBSD is a registered trademark of The FreeBSD Foundation.<br>FreeBSD 7.0-STABLE #0: Sun Mar&nbsp;&nbsp;9 06:00:53 UTC 2008<br>
 &nbsp;&nbsp; root@lds.napanet.net:/usr/src/sys/amd64/compile/LDS<br>Timecounter &quot;i8254&quot; frequency 1193182 Hz quality 0<br>CPU: Intel(R) Xeon(R) CPU&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; E5410&nbsp;&nbsp;@ 2.33GHz (2333.34-MHz K8-class CPU)<br>Origin = &quot;GenuineIntel&quot;&nbsp;&nbsp;Id = 0x10676&nbsp;&nbsp;Stepping = 6<br>
 Features=0xbfebfbff&lt;FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE&gt;<br>Features2=0xce3bd&lt;SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,&lt;b19&gt;&gt;<br>
 AMD Features=0x20100800&lt;SYSCALL,NX,LM&gt;<br>AMD Features2=0x1&lt;LAHF&gt;<br>Cores per package: 4<br>usable memory = 4281757696 (4083 MB)<br>avail memory&nbsp;&nbsp;= 4120399872 (3929 MB)<br>ACPI APIC Table: &lt;PTLTD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;APIC&nbsp;&nbsp;&gt;<br>
 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs<br>cpu0 (BSP): APIC ID:&nbsp;&nbsp;0<br>cpu1 (AP): APIC ID:&nbsp;&nbsp;1<br>cpu2 (AP): APIC ID:&nbsp;&nbsp;2<br>cpu3 (AP): APIC ID:&nbsp;&nbsp;3<br>ioapic0 &lt;Version 2.0&gt; irqs 0-23 on motherboard<br>ioapic1 &lt;Version 2.0&gt; irqs 24-47 on motherboard<br>
 kbd1 at kbdmux0<br>ath_hal: <a href="http://0.9.20.3">0.9.20.3</a>; (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)<br>acpi0: &lt;PTLTD&nbsp;&nbsp; RSDT&gt; on motherboard<br>acpi0: [ITHREAD]<br>acpi0: Power Button (fixed)<br>
 Timecounter &quot;ACPI-fast&quot; frequency 3579545 Hz quality 1000<br>acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x1008-0x100b on acpi0<br>cpu0: &lt;ACPI CPU&gt; on acpi0<br>est0: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu0<br>
 est: CPU supports Enhanced Speedstep, but is not recognized.<br>est: cpu_vendor GenuineIntel, msr 720072006000720<br>device_attach: est0 attach returned 6<br>p4tcc0: &lt;CPU Frequency Thermal Control&gt; on cpu0<br>cpu1: &lt;ACPI CPU&gt; on acpi0<br>
 est1: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu1<br>est: CPU supports Enhanced Speedstep, but is not recognized.<br>est: cpu_vendor GenuineIntel, msr 720072006000720<br>device_attach: est1 attach returned 6<br>p4tcc1: &lt;CPU Frequency Thermal Control&gt; on cpu1<br>
 cpu2: &lt;ACPI CPU&gt; on acpi0<br>est2: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu2<br>est: CPU supports Enhanced Speedstep, but is not recognized.<br>est: cpu_vendor GenuineIntel, msr 720072006000720<br>device_attach: est2 attach returned 6<br>
 p4tcc2: &lt;CPU Frequency Thermal Control&gt; on cpu2<br>cpu3: &lt;ACPI CPU&gt; on acpi0<br>est3: &lt;Enhanced SpeedStep Frequency Control&gt; on cpu3<br>est: CPU supports Enhanced Speedstep, but is not recognized.<br>est: cpu_vendor GenuineIntel, msr 720072006000720<br>
 device_attach: est3 attach returned 6<br>p4tcc3: &lt;CPU Frequency Thermal Control&gt; on cpu3<br>pcib0: &lt;ACPI Host-PCI bridge&gt; port 0xcf8-0xcff on acpi0<br>pci0: &lt;ACPI PCI bus&gt; on pcib0<br>pcib1: &lt;ACPI PCI-PCI bridge&gt; at device 2.0 on pci0<br>
 pci1: &lt;ACPI PCI bus&gt; on pcib1<br>pcib2: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 0.0 on pci1<br>pci2: &lt;ACPI PCI bus&gt; on pcib2<br>pcib3: &lt;ACPI PCI-PCI bridge&gt; irq 16 at device 0.0 on pci2<br>pci3: &lt;ACPI PCI bus&gt; on pcib3<br>
 pcib4: &lt;ACPI PCI-PCI bridge&gt; at device 0.0 on pci3<br>pci4: &lt;ACPI PCI bus&gt; on pcib4<br>pcib5: &lt;ACPI PCI-PCI bridge&gt; at device 0.2 on pci3<br>pci5: &lt;ACPI PCI bus&gt; on pcib5<br>pcib6: &lt;ACPI PCI-PCI bridge&gt; irq 18 at device 2.0 on pci2<br>
 pci6: &lt;ACPI PCI bus&gt; on pcib6<br>em0: &lt;Intel(R) PRO/1000 Network Connection Version - 6.7.3&gt; port 0x2000-0x201f mem 0xda020000-0xda03ffff,0xda000000-0xda01ffff irq 18 at device 0.0 on pci6<br>em0: Using MSI interrupt<br>
 em0: Ethernet address: 00:30:48:62:f4:62<br>em0: [FILTER]<br>em1: &lt;Intel(R) PRO/1000 Network Connection Version - 6.7.3&gt; port 0x2020-0x203f mem 0xda060000-0xda07ffff,0xda040000-0xda05ffff irq 19 at device 0.1 on pci6<br>
 em1: Using MSI interrupt<br>em1: Ethernet address: 00:30:48:62:f4:63<br>em1: [FILTER]<br>pcib7: &lt;ACPI PCI-PCI bridge&gt; at device 0.3 on pci1<br>pci7: &lt;ACPI PCI bus&gt; on pcib7<br>pcib8: &lt;ACPI PCI-PCI bridge&gt; at device 4.0 on pci0<br>
 pci8: &lt;ACPI PCI bus&gt; on pcib8<br>pcib9: &lt;ACPI PCI-PCI bridge&gt; at device 6.0 on pci0<br>pci9: &lt;ACPI PCI bus&gt; on pcib9<br>3ware device driver for 9000 series storage controllers, version: <a href="http://3.70.05.001">3.70.05.001</a><br>;
 twa0: &lt;3ware 9000 series Storage Controller&gt; port 0x3000-0x30ff mem 0xd8000000-0xd9ffffff,0xda300000-0xda300fff irq 18 at device 0.0 on pci9<br>twa0: [ITHREAD]<br>twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:<br>
 twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-24M8, 24 ports, Firmware FE9X <a href="http://3.08.00.016">3.08.00.016</a>, BIOS BE9X <a href="http://3.08.00.004">3.08.00.004</a><br>pci0: &lt;base peripheral&gt; at device 8.0 (no driver attached)<br>
 pcib10: &lt;ACPI PCI-PCI bridge&gt; irq 17 at device 28.0 on pci0<br>pci10: &lt;ACPI PCI bus&gt; on pcib10<br>uhci0: &lt;Intel 631XESB/632XESB/3100 USB controller USB-1&gt; port 0x1800-0x181f irq 17 at device 29.0 on pci0<br>
 uhci0: [GIANT-LOCKED]<br>uhci0: [ITHREAD]<br>usb0: &lt;Intel 631XESB/632XESB/3100 USB controller USB-1&gt; on uhci0<br>usb0: USB revision 1.0<br>uhub0: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb0<br>
 uhub0: 2 ports with 2 removable, self powered<br>uhci1: &lt;Intel 631XESB/632XESB/3100 USB controller USB-2&gt; port 0x1820-0x183f irq 19 at device 29.1 on pci0<br>uhci1: [GIANT-LOCKED]<br>uhci1: [ITHREAD]<br>usb1: &lt;Intel 631XESB/632XESB/3100 USB controller USB-2&gt; on uhci1<br>
 usb1: USB revision 1.0<br>uhub1: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb1<br>uhub1: 2 ports with 2 removable, self powered<br>uhci2: &lt;Intel 631XESB/632XESB/3100 USB controller USB-3&gt; port 0x1840-0x185f irq 18 at device 29.2 on pci0<br>
 uhci2: [GIANT-LOCKED]<br>uhci2: [ITHREAD]<br>usb2: &lt;Intel 631XESB/632XESB/3100 USB controller USB-3&gt; on uhci2<br>usb2: USB revision 1.0<br>uhub2: &lt;Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1&gt; on usb2<br>
 uhub2: 2 ports with 2 removable, self powered<br>ehci0: &lt;Intel 63XXESB USB 2.0 controller&gt; mem 0xda600000-0xda6003ff irq 17 at device 29.7 on pci0<br>ehci0: [GIANT-LOCKED]<br>ehci0: [ITHREAD]<br>usb3: EHCI version 1.0<br>
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2<br>usb3: &lt;Intel 63XXESB USB 2.0 controller&gt; on ehci0<br>usb3: USB revision 2.0<br>uhub3: &lt;Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1&gt; on usb3<br>
 uhub3: 6 ports with 6 removable, self powered<br>pcib11: &lt;ACPI PCI-PCI bridge&gt; at device 30.0 on pci0<br>pci11: &lt;ACPI PCI bus&gt; on pcib11<br>vgapci0: &lt;VGA-compatible display&gt; port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xda200000-0xda20ffff irq 18 at device 1.0 on pci11<br>
 isab0: &lt;PCI-ISA bridge&gt; at device 31.0 on pci0<br>isa0: &lt;ISA bus&gt; on isab0<br>atapci0: &lt;Intel 63XXESB2 UDMA100 controller&gt; port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0<br>
 ata0: &lt;ATA channel 0&gt; on atapci0<br>ata0: [ITHREAD]<br>ata1: &lt;ATA channel 1&gt; on atapci0<br>ata1: [ITHREAD]<br>atapci1: &lt;Intel AHCI controller&gt; port 0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem 0xda600400-0xda6007ff irq 19 at device 31.2 on pci0<br>
 atapci1: [ITHREAD]<br>atapci1: AHCI Version 01.10 controller with 6 ports detected<br>ata2: &lt;ATA channel 0&gt; on atapci1<br>ata2: [ITHREAD]<br>ata3: &lt;ATA channel 1&gt; on atapci1<br>ata3: [ITHREAD]<br>ata4: &lt;ATA channel 2&gt; on atapci1<br>
 ata4: [ITHREAD]<br>ata5: &lt;ATA channel 3&gt; on atapci1<br>ata5: [ITHREAD]<br>ata6: &lt;ATA channel 4&gt; on atapci1<br>ata6: [ITHREAD]<br>ata7: &lt;ATA channel 5&gt; on atapci1<br>ata7: [ITHREAD]<br>pci0: &lt;serial bus, SMBus&gt; at device 31.3 (no driver attached)<br>
 acpi_button0: &lt;Power Button&gt; on acpi0<br>atkbdc0: &lt;Keyboard controller (i8042)&gt; port 0x60,0x64 irq 1 on acpi0<br>atkbd0: &lt;AT Keyboard&gt; irq 1 on atkbdc0<br>kbd0 at atkbd0<br>atkbd0: [GIANT-LOCKED]<br>atkbd0: [ITHREAD]<br>
 sio0: configured irq 4 not in bitmap of probed irqs 0<br>sio0: port may not be enabled<br>sio0: configured irq 4 not in bitmap of probed irqs 0<br>sio0: port may not be enabled<br>sio0: &lt;16550A-compatible COM port&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0<br>
 sio0: type 16550A<br>sio0: [FILTER]<br>sio1: configured irq 3 not in bitmap of probed irqs 0<br>sio1: port may not be enabled<br>sio1: configured irq 3 not in bitmap of probed irqs 0<br>sio1: port may not be enabled<br>sio1: &lt;16550A-compatible COM port&gt; port 0x2f8-0x2ff irq 3 on acpi0<br>
 sio1: type 16550A<br>sio1: [FILTER]<br>fdc0: &lt;floppy drive controller&gt; port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0<br>fdc0: [FILTER]<br>ppc0: &lt;Parallel port&gt; port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0<br>
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode<br>ppc0: FIFO with 16/16/9 bytes threshold<br>ppbus0: &lt;Parallel port bus&gt; on ppc0<br>ppbus0: [ITHREAD]<br>plip0: &lt;PLIP network interface&gt; on ppbus0<br>
 lpt0: &lt;Printer&gt; on ppbus0<br>lpt0: Interrupt-driven port<br>ppi0: &lt;Parallel I/O&gt; on ppbus0<br>ppc0: [GIANT-LOCKED]<br>ppc0: [ITHREAD]<br>orm0: &lt;ISA Option ROMs&gt; at iomem 0xc0000-0xcafff,0xcb000-0xccfff,0xcd000-0xcefff on isa0<br>
 sc0: &lt;System console&gt; at flags 0x100 on isa0<br>sc0: VGA &lt;16 virtual consoles, flags=0x300&gt;<br>vga0: &lt;Generic ISA VGA&gt; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br>Timecounters tick every 1.000 msec<br>
 ad4: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata2-master SATA300<br>ad6: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata3-master SATA300<br>ad8: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata4-master SATA300<br>
 ad10: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata5-master SATA300<br>ad12: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata6-master SATA300<br>ad14: 953869MB &lt;Hitachi HDS721010KLA330 GKAOA70M&gt; at ata7-master SATA300<br>
 SMP: AP CPU #1 Launched!<br>SMP: AP CPU #3 Launched!<br>SMP: AP CPU #2 Launched!<br>da0 at twa0 bus 0 target 0 lun 0<br>da0: &lt;AMCC 9650SE-24M DISK 3.08&gt; Fixed Direct Access SCSI-5 device<br>da0: 100.000MB/s transfers<br>
 da0: 5721984MB (11718623232 512 byte sectors: 255H 63S/T 729450C)<br>Trying to mount root from ufs:/dev/ad4s1a<br>em0: link state changed to UP<br>twa0: INFO: (0x04: 0x000C): Initialize started: unit=0<br><br><br>&gt;Release-Note:<br>
 &gt;Audit-Trail:<br>&gt;Unformatted:<br>_______________________________________________<br><a href="mailto:freebsd-bugs@freebsd.org">freebsd-bugs@freebsd.org</a> mailing list<br><a href="http://lists.freebsd.org/mailman/listinfo/freebsd-bugs">http://lists.freebsd.org/mailman/listinfo/freebsd-bugs</a><br>;
 To unsubscribe, send any mail to &quot;<a href="mailto:freebsd-bugs-unsubscribe@freebsd.org">freebsd-bugs-unsubscribe@freebsd.org</a>&quot;<br></blockquote></div><br>
 
 ------=_Part_14553_12272169.1205172885718--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200803101840.m2AIe2XS035076>