Date: Tue, 11 Apr 2000 21:09:31 -0700 From: chip <chip@wiegand.org> To: Alfred Perlstein <bright@wintelcom.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: I'm at a loss for a way to mount this second harddrive Message-ID: <00041121362901.01762@chip.wiegand.org> References: <20000411211711.C4381@fw.wintelcom.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Okay, here are my results:
chip# fdisk wd3
******* Working on device /dev/rwd3 *******
parameters extracted from in-core disklabel are:
cylinders=341 heads=192 sectors/track=63 (12096 blks/cyl)
parameters to be used for BIOS calculations are:
cylinders=341 heads=192 sectors/track=63 (12096 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 4124673 (2014 Meg), flag 80 (active)
beg: cyl 0/ sector 1/ head 1;
end: cyl 340/ sector 63/ head 191
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
chip#
chip# disklabel wd3s1
# /dev/rwd3s1:
type: ESDI
disk: wd1s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 192
sectors/cylinder: 12096
cylinders: 340
sectors/unit: 4124673
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 204800 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 16*)
b: 262144 204800 swap # (Cyl. 16*- 38*)
c: 4124673 0 unused 0 0 # (Cyl. 0 - 340*)
e: 3657729 466944 4.2BSD 1024 8192 16 # (Cyl. 38*- 340*)
chip#
And my fstab -
# Device Mountpoint FStype Options Dump Pass#
/dev/wd1s1b none swap sw 0 0
/dev/wd1s1a / ufs rw 1 1
/dev/wd1s1e /usr ufs rw 2 2
/dev/acd0c /cdrom cd9660 ro,noauto 0 0
/dev/fd0 /usr/floppy msdos rw,noauto 0 0
/dev/wd0s1 /usr/windows msdos rw 0 0
proc /proc procfs rw 0 0
I may be wrong here but it looks like something is wrong in the
second section - disklabel wd3s1. It shows disk wd1s1 which is
already mounted as my working fbsd drive, as shown in the fstab file
above.
Then you last instruction is to mount the drive with the partition
number and letter, in my case
wd3s1a
but that doesn't exist if the /dev directory. wd3s1 and wd3a both
exist though. There are no wd_x_s_x_?_ types listed. And I get
failure messages trying any of the above.
Maybe my system is missing something?
--
Chip
www.wiegand.org
*****
Visit my web site -
Alternative Operating Systems - MS Windows isn't the only OS in town.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00041121362901.01762>