Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Jul 2007 11:19:12 +0100
From:      Thomas Sparrevohn <Thomas.Sparrevohn@btinternet.com>
To:        freebsd-acpi@freebsd.org
Subject:   Re: (no subject)
Message-ID:  <200707121119.12670.Thomas.Sparrevohn@btinternet.com>
In-Reply-To: <82CDCEB3-E236-40FC-929A-410CD73A90C8@uos.de>
References:  <82CDCEB3-E236-40FC-929A-410CD73A90C8@uos.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 11 July 2007 20:04:24 Ivaylo Mateev wrote:
> 			,
> 
> I have some Problems when I power off or reboot my Computer.
> 
> It doesn't matter if I do "reboot", "halt", "shutdown -p now". The  
> Computer stay on
> with the Message:
> All Bufferes synced
> Uptime XXXXXXXX
> 
> Everything seems to be O.K. but it just wont power off or reboot
> 
> Some info:
> 
> ----------------
> uname -a:
> 
> FreeBSD heavymetal 6.2-STABLE FreeBSD 6.2-STABLE #4: Tue Jul 10  
> 14:46:47 CEST 2007 root@:/usr/obj/usr/src/sys/HEAVYMETAL i386
> 
> ------------------


I think it is due to the USB - Could you try to boot without USB? - I found
that it something to do with usb.ko - e.g the ohci or ehci driver - but I have not had
time to debug it further


> 
> -------------------
> [strato@heavymetal ~]$ sudo sysctl hw.acpi
> hw.acpi.supported_sleep_state: S3 S4 S5
> hw.acpi.power_button_state: S5
> hw.acpi.sleep_button_state: S3
> hw.acpi.lid_switch_state: NONE
> hw.acpi.standby_state: S1
> hw.acpi.suspend_state: S3
> hw.acpi.sleep_delay: 1
> hw.acpi.s4bios: 0
> hw.acpi.verbose: 0
> hw.acpi.disable_on_reboot: 0
> hw.acpi.handle_reboot: 0
> hw.acpi.reset_video: 0
> hw.acpi.cpu.cx_lowest: C1
> hw.acpi.thermal.min_runtime: 0
> hw.acpi.thermal.polling_rate: 10
> hw.acpi.thermal.user_override: 0
> hw.acpi.thermal.tz0.temperature: 48.0C
> hw.acpi.thermal.tz0.active: -1
> hw.acpi.thermal.tz0.passive_cooling: 1
> hw.acpi.thermal.tz0.thermal_flags: 0
> hw.acpi.thermal.tz0._PSV: 80.0C
> hw.acpi.thermal.tz0._HOT: -1
> hw.acpi.thermal.tz0._CRT: 90.0C
> hw.acpi.thermal.tz0._ACx: 80.0C -1 -1 -1 -1 -1 -1 -1 -1 -1
> [strato@heavymetal ~]$
> -------------------
> 
> -----------------------
> hier dmesg
> 
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-STABLE #4: Tue Jul 10 14:46:47 CEST 2007
>      root@:/usr/obj/usr/src/sys/HEAVYMETAL
> ACPI APIC Table: <Nvidia AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2375.02-MHz 686- 
> class CPU)
>    Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
>     
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>    Features2=0x2001<SSE3,CX16>
>    AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>    AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
>    Cores per package: 2
> real memory  = 804192256 (766 MB)
> avail memory = 769056768 (733 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff  
> on acpi0
> Timecounter "HPET" frequency 25000000 Hz quality 2000
> acpi0: Power Button (fixed)
> acpi0: reservation of feff0000, 100 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory, RAM> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> pci0: <memory, RAM> at device 1.2 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq  
> 21 at device 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 5 ports with 5 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff  
> irq 22 at device 2.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 12 ports each: usb0
> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub1: 5 ports with 5 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq  
> 23 at device 4.0 on pci0
> ohci1: [GIANT-LOCKED]
> usb2: OHCI version 1.0, legacy support
> usb2: <OHCI (generic) USB controller> on ohci1
> usb2: USB revision 1.0
> uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 5 ports with 5 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff  
> irq 20 at device 4.1 on pci0
> ehci1: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controller, 12 ports each: usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci1
> usb3: USB revision 2.0
> uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 5 ports with 5 removable, self powered
> atapci0: <GENERIC ATA controller> port  
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcm0: <NVidia (Unknown) High Definition Audio Controller> mem  
> 0xfe020000-0xfe023fff irq 21 at device 7.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> atapci1: <GENERIC ATA controller> port  
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem  
> 0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem  
> 0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq  
> 23 at device 10.0 on pci0
> miibus0: <MII bus> on nfe0
> e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
> 1000baseTX-FDX, auto
> nfe0: Ethernet address: 00:50:8d:9f:27:19
> nfe0: [FAST]
> pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> nvidia0: <GeForce 7025 / NVIDIA nForce 630a> mem  
> 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq  
> 20 at device 18.0 on pci0
> nvidia0: [GIANT-LOCKED]
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
> isa0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> Timecounters tick every 1.000 msec
> acd0: DVDROM <TEAC DV-516GA/G4S3> at ata0-master UDMA33
> ad7: 152627MB <SAMSUNG HD161HJ JF100-15> at ata3-slave UDMA33
> pcm0: <HDA Codec: Realtek ALC888>
> pcm0: <HDA Driver Revision: 20070619_0045>
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad7s1a
> ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <JetFlash TS1GJFV10 0.00> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)
> 
> ---------------------------
> 
> Thanx for the help
> 
> Ivo
> 
> _______________________________________________
> freebsd-acpi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
> 





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707121119.12670.Thomas.Sparrevohn>