Date: Fri, 21 Aug 2009 13:37:50 +0200 From: Martin Laabs <mailinglists@martinlaabs.de> To: freebsd-questions@freebsd.org Subject: g_vfs_done() WRITE error Message-ID: <4A8E870E.70205@martinlaabs.de>
next in thread | raw e-mail | index | archive | help
Hi,
I have a brand new HDD and I copied my system and home directory to it.
While copying my home directory I got the following errors at dmesg and
/var/log/messages:
Aug 21 08:49:16 pc kernel: g_vfs_done():ufs/home[WRITE(offset=50879299584,
length=32768)]error = 1
Aug 21 08:49:51 pc last message repeated 12 times
Aug 21 08:51:51 pc last message repeated 19 times
Aug 21 08:55:25 pc last message repeated 35 times
Aug 21 08:55:29 pc kernel: g_vfs_done():ufs/home[WRITE(offset=50879315968,
length=16384)]error = 1
Aug 21 08:55:29 pc last message repeated 4 times
Errno 1 would mean access denied. However - this makes no sense to me for
the hardware access to the harddisk.
The partition is encrypted via gbde. So /dev/ufs/home points to the same
partition /dev/label/home.bde which is the "decrypted" /dev/label/home.
(And /dev/label/home points to /dev/ad4s4e)
smartctrl -a /dev/ad4 reports no errors (i.e. sector defects)
uname -a:
FreeBSD pc.martinlaabs.de 7.2-STABLE FreeBSD 7.2-STABLE #1: Sat Aug 15
18:48:58 CEST 2009
martin@pc.martinlaabs.de:/usr/obj/usr/src/sys/GENERIC i386
Can you explain me that error?
Thank you,
Martin L.
PS:
Here is my dmesg (the "medium not present" error at sa0 is ok since it is a
streamer without a tape)
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #1: Sat Aug 15 18:48:58 CEST 2009
martin@pc.martinlaabs.de:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/uftdi already exists!
Module uhub/uftdi failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) II X2 240 Processor (2795.97-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x100f62 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!
>
AMD
Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,
SKINIT,WDT>
TSC: P-state invariant
Cores per package: 2
real memory = 2012938240 (1919 MB)
avail memory = 1947013120 (1856 MB)
ACPI APIC Table: <040909 APIC1950>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <040909 RSDT1950> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fefe1000, 1000 (3) failed
acpi0: reservation of fee01000, ff000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1f00-0x1fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfbe7f000-0xfbe7ffff irq 22 at
devic
e 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 6 ports with 6 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbe7ec00-0xfbe7ecff irq 23
at d
evice 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 6 ports with 6 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfbe7d000-0xfbe7dfff irq 20 at
devic
e 4.0 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbe7e800-0xfbe7e8ff irq 21
at d
evice 4.1 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
atapci0: <nVidia nForce MCP67 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0
x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
hdac0: <NVidia MCP67 High Definition Audio Controller> mem
0xfbe78000-0xfbe7bfff
irq 22 at device 7.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 10.0 on pci1
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xf6000000-0xf7ffffff irq 10 at
device 10.
1 on pci1
asr0: [GIANT-LOCKED]
asr0: [ITHREAD]
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
atapci1: <nVidia nForce MCP67 SATA300 controller> port
0xf80-0xf87,0xf00-0xf03,0
xe80-0xe87,0xe00-0xe03,0xdc00-0xdc0f mem 0xfbe76000-0xfbe77fff irq 23 at
device
9.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd880-0xd887 mem
0xfbe7c000
-0xfbe7cfff,0xfbe7e400-0xfbe7e4ff,0xfbe7e000-0xfbe7e00f irq 20 at device
10.0 on
pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 3 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-F
DX, auto
nfe0: Ethernet address: 00:19:66:db:c0:ec
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci9: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> mem
0xfa000000-0xfaffffff,0xe0000000-0xeffffff
f,0xf9000000-0xf9ffffff irq 21 at device 18.0 on pci0
nvidia0: <GeForce 7050 PV / nForce 630a> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 flags 0x10 on
acpi
0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi
0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Mouse, class 0/0, rev 1.10/6.20, addr 2> on uhub0
ums0: 3 buttons and Z dir.
uhub4: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 2> on
uhub2
uhub4: 4 ports with 4 removable, bus powered
ugen0: <SafeNet Inc. SafeNet Sentinel, class 255/0, rev 2.00/1.01, addr 3>
on uh
ub4
ugen1: <AKS Hardlock USB 1.02, class 255/0, rev 1.00/1.00, addr 4> on uhub4
uhid0: <Logitech Logitech Extreme 3D, class 0/0, rev 1.10/2.04, addr 5> on
uhub2
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master UDMA100
ad1: 76319MB <SAMSUNG SP0842N BH900-41> at ata0-slave UDMA133
ad4: 476940MB <SAMSUNG HD502HI 1AG01118> at ata2-master SATA300
hdac0: HDA Codec #0: Realtek ALC662
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0
(probe0:asr0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:asr0:0:0:0): CAM Status: SCSI Status Error
(probe0:asr0:0:0:0): SCSI Status: Check Condition
(probe0:asr0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:asr0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:asr0:0:0:0): Retrying Command (per Sense Data)
(probe0:asr0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:asr0:0:0:0): CAM Status: SCSI Status Error
(probe0:asr0:0:0:0): SCSI Status: Check Condition
(probe0:asr0:0:0:0): NOT READY asc:3a,0
(probe0:asr0:0:0:0): Medium not present
(probe0:asr0:0:0:0): Unretryable error
sa0 at asr0 bus 0 target 0 lun 0
sa0: <SEAGATE DAT 9SP40-000 910B> Removable Sequential Access SCSI-3 device
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad1s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
nfe0: link state changed to UP
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
WARNING: /media was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: R/W mount of /ns denied. Filesystem is not clean - run fsck
g_vfs_done():ufs/home[WRITE(offset=50879299584, length=32768)]error = 1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A8E870E.70205>