Date: Tue, 13 Apr 2021 22:05:21 -0300 (-03) From: Nilton Jose Rizzo <rizzo@i805.com.br> To: hps@selasky.org (Hans Petter Selasky) Cc: freebsd-current@freebsd.org Subject: Re: Problems with Webcam and USB 3.X Message-ID: <202104140105.13E15LOW041696@server.i805.com.br> In-Reply-To: <02f5664e-e503-96c6-2b57-68e6031eaf77@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> > On 4/14/21 2:49 AM, Nilton Jose Rizzo wrote: > > ugen1.3: <vendor 0x046d product 0x0825> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > > Hi, > > This webcam is connected VIA USB2.0 protocols only. No USB 3.x involved. I try to connect in 2.0, 3.0 and 3.1 ports, and nothing worked. > > Unstable picture may indicate a bandwidth problem. hummm, like a Nathan report. > > You can also compile webcamd with debugging and run it in the > foreground. Then webcamd will likely print the UVC decoding glitches. > > You may also try the following command to get more logs: > > usbdump -i usbus1 -f 3 22:02:42.653750 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.653763 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=16036,IVAL=0,ERR=0 22:02:42.669780 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.669806 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=78424,IVAL=0,ERR=0 22:02:42.685686 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.685709 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=34880,IVAL=0,ERR=0 22:02:42.701671 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.701677 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=1536,IVAL=0,ERR=0 22:02:42.717703 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.717711 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=6656,IVAL=0,ERR=0 22:02:42.733736 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:02:42.733765 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=77708,IVAL=0,ERR=0 22:02:42.735231 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=CANCELLED 22:02:42.755700 usbus1.3 SUBM-CTRL-EP=00000000,SPD=HIGH,NFR=1,SLEN=8,IVAL=0 22:02:42.755842 usbus1.3 DONE-CTRL-EP=00000000,SPD=HIGH,NFR=1,SLEN=0,IVAL=0,ERR=0 > > Then start for a few seconds till you get a picture: > > pwcview -d /dev/video0 -s vga > The same result 22:03:30.860068 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.860079 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=13608,IVAL=0,ERR=0 22:03:30.876112 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.876121 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=1536,IVAL=0,ERR=0 22:03:30.892141 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.892148 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=1536,IVAL=0,ERR=0 22:03:30.908173 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.908182 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=1536,IVAL=0,ERR=0 22:03:30.924075 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.924092 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=20912,IVAL=0,ERR=0 22:03:30.940107 usbus1.3 SUBM-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=0,IVAL=0 22:03:30.940116 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=128,SLEN=1536,IVAL=0,ERR=0 22:03:30.947355 usbus1.3 DONE-ISOC-EP=00000081,SPD=HIGH,NFR=0,SLEN=0,IVAL=0,ERR=CANCELLED 22:03:30.967771 usbus1.3 SUBM-CTRL-EP=00000000,SPD=HIGH,NFR=1,SLEN=8,IVAL=0 22:03:30.967918 usbus1.3 DONE-CTRL-EP=00000000,SPD=HIGH,NFR=1,SLEN=0,IVAL=0,ERR=0 I forgot report, I can't close the pwcview, only exit with <CTRL>+<C> and report this error % pwcview -d /dev/video0 -s vga Webcam set to: 640x480 (vga) at 5 fps ^Clibv4l2: error dequeuing buf: Device not configured Error reading from webcam: Device not configured > Have you tried another webcam on the same machine? > > --HPS > TIA Rizzo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202104140105.13E15LOW041696>