Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Oct 1998 14:22:26 +0200
From:      Lars =?iso-8859-1?Q?K=F6ller?= <lkoeller@cc.fh-lippe.de>
To:        freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG
Cc:        lkoeller@odie.lippe.de, Lars.Koeller@Uni-Bielefeld.DE
Subject:   Still freeze with 3.0-RELEASE, PLEASE give me any suggestions!!
Message-ID:  <199810221222.OAA01073@odie.lippe.de>

next in thread | raw e-mail | index | archive | help
This is a multipart MIME message.

--==_Exmh_-3533862440
Content-Type: text/plain; charset=us-ascii

--------

Hello again!

I've just upgraded my 3.0CAM SNAP to 3.0-RELEASE with no problems. 
But there are still a freeze of the system soon after I've enabled 
X11. This is not the kind of a proof X11 is responsibe for the 
problems, but more like an intuition.

Again, the hole system is running very very stable with 2.2.7!!

The hardware is a Tyan Titan Pro with 2x200 MHz PPro and 64MB RAM, 
Matrox Millenium (8MB). (Xserver version, etc. see attachment).

I also change the BIOS values to slower RAM access and disable 
some features, no change. Andreas Klemm which own the same Board has 
no such freezes with the same BIOS settings! I've also reserved 
IRQ 15 for the video card (could be set in the BIOS) cause else it's 
occupied by the Adaptec 2940:

ahc1 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 15 on pci0:13:0

Again no change (after this IRQ 15 is occupied by the vga device and 
the Adaptec is on IRQ 2)! 

The system freezes with both SMP and NO-SMP, I've also changed the 
RAM, the PPro slot 0->1, 1->0, no change at all. 2.2.7-RELEASE is stable, 
3.0 freezes with no message on the console, until today!!!

I've get the following panic:

kernel: type 12 trap, code = 0
Stopped at		_dasendorderedtag+0x15:	cmpl	$0,0xb4(%ebx)

db> show registers

 cs	       0x8
 ds	0x582a0010
 es	0xf01e0010	_vid_set_border+0xb8
 ss	      0x10
eax	0xc0000000
ecx	0xf1c9ec38
edx	         0
ebx	    0x306c
esp	0xf01ecf8c	_etext+0x2b4c
ebp	0xf01ecf90	_etext+0x2b50
esi	0xf01f1f8?	_dasendorderedtag       (sorry, address wrong noted)
edi	0xc0000000
eip	0xf010f20d	_dasendorderedtag+0x15
efl	   0x10286

The hole upgrade/install (aout to elf) was done with X11 disabled.

Any suggestions are welcome!

Thanks

Lars

E-Mail:                                     |  Lars Koeller
  Lars.Koeller@Uni-Bielefeld.DE              |  UNIX Sysadmin
  lkoeller@cc.fh-lippe.de                     |  Computing Center
PGP-key:                                       |  University of Bielefeld
  http://www.nic.surfnet.nl/pgp/pks-toplev.html |  Germany
----------- FreeBSD, what else? ---- http://www.freebsd.org -------------


--==_Exmh_-3533862440
Content-Type: text/plain ; name="messages"; charset=us-ascii
Content-Description: messages
Content-Disposition: attachment; filename="messages"

Oct 22 12:23:53 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc.
Oct 22 12:23:53 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Oct 22 12:23:53 odie /kernel: The Regents of the University of California. All rights reserved.
Oct 22 12:23:53 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998
Oct 22 12:23:53 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade
Oct 22 12:23:53 odie /kernel: Timecounter "i8254"  frequency 1193182 Hz  cost 3345 ns
Oct 22 12:23:53 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU)
Oct 22 12:23:53 odie /kernel: Origin = "GenuineIntel"  Id = 0x619  Stepping=9
Oct 22 12:23:53 odie /kernel: Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
Oct 22 12:23:53 odie /kernel: real memory  = 67108864 (65536K bytes)
Oct 22 12:23:53 odie /kernel: avail memory = 62799872 (61328K bytes)
Oct 22 12:23:53 odie /kernel: Probing for devices on PCI bus 0:
Oct 22 12:23:53 odie /kernel: Correcting Natoma config for non-SMP
Oct 22 12:23:53 odie /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
Oct 22 12:23:53 odie /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
Oct 22 12:23:53 odie /kernel: ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 14 on pci0.12.0
Oct 22 12:23:53 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
Oct 22 12:23:53 odie /kernel: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 15 on pci0.13.0
Oct 22 12:23:53 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id
Oct 22 12:23:53 odie /kernel: =7, 16/255 SCBs
Oct 22 12:23:53 odie /kernel: vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 255 on pci0.14.0
Oct 22 12:23:53 odie /kernel: Probing for devices on the ISA bus:
Oct 22 12:23:53 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Oct 22 12:23:53 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0>
Oct 22 12:23:53 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard
Oct 22 12:23:53 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0
Oct 22 12:23:53 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
Oct 22 12:23:53 odie /kernel: sio0: type 16550A
Oct 22 12:23:53 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Oct 22 12:23:53 odie /kernel: sio1: type 16550A
Oct 22 12:23:53 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa
Oct 22 12:23:53 odie /kernel: lpt0: Interrupt-driven port
Oct 22 12:23:53 odie /kernel: lp0: TCP/IP capable interface
Oct 22 12:23:53 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Oct 22 12:23:53 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold
Oct 22 12:23:53 odie /kernel: fd0: 1.44MB 3.5in
Oct 22 12:23:53 odie /kernel: fd1: 1.2MB 5.25in
Oct 22 12:23:53 odie /kernel: apm0 on isa
Oct 22 12:23:53 odie /kernel: apm: found APM BIOS version 1.2
Oct 22 12:23:53 odie /kernel: npx0 on motherboard
Oct 22 12:23:53 odie /kernel: npx0: INT 16 interface
Oct 22 12:23:53 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa
Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster 16 4.13>
Oct 22 12:23:53 odie /kernel: sbxvi0 at ? drq 5 on isa
Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster 16 4.13>
Oct 22 12:23:53 odie /kernel: sbmidi0 at 0x330 on isa
Oct 22 12:23:53 odie /kernel: snd0: <SoundBlaster MPU-401>
Oct 22 12:23:53 odie /kernel: awe0 at 0x620 on isa
Oct 22 12:23:53 odie /kernel: AWE32: not detected
Oct 22 12:23:53 odie /kernel:
Oct 22 12:23:54 odie /kernel: ccd0-3: Concatenated disk drivers
Oct 22 12:23:54 odie /kernel: Waiting 8 seconds for SCSI devices to settle
Oct 22 12:23:54 odie /kernel: ahc0:A:6: Missed busfree
Oct 22 12:23:54 odie /kernel: .
Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44
Oct 22 12:23:54 odie /kernel: SEQADDR == 0x8
Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13
Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): Queuing a BDR SCB
Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x44
Oct 22 12:23:54 odie /kernel: SEQADDR == 0x4
Oct 22 12:23:54 odie /kernel: SSTAT1 == 0x13
Oct 22 12:23:54 odie /kernel: (probe0:ahc0:0:0:2): no longer in timeout, status = 34b
Oct 22 12:23:54 odie /kernel: ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
Oct 22 12:23:54 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0
Oct 22 12:23:54 odie /kernel: sa1: <HP C1533A 9503> Removable Sequential Access SCSI2 device
Oct 22 12:23:54 odie /kernel: sa1: 3.300MB/s transfers
Oct 22 12:23:54 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0
Oct 22 12:23:54 odie /kernel: da2: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device
Oct 22 12:23:54 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
Oct 22 12:23:54 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C)
Oct 22 12:23:54 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0
Oct 22 12:23:54 odie /kernel: da3: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device
Oct 22 12:23:54 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
Oct 22 12:23:54 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C)
Oct 22 12:23:54 odie /kernel: changing root device to da0s2a
Oct 22 12:23:54 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0
Oct 22 12:23:54 odie /kernel:
Oct 22 12:23:54 odie /kernel: ch0: <ADIC DAT AutoChanger 0360> Removable Changer SCSI2 device
Oct 22 12:23:54 odie /kernel: ch0: 3.300MB/s transfers
Oct 22 12:23:54 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal
Oct 22 12:23:54 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0
Oct 22 12:23:54 odie /kernel: da1: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device
Oct 22 12:23:54 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
Oct 22 12:23:54 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
Oct 22 12:23:54 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0
Oct 22 12:23:54 odie /kernel: da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device
Oct 22 12:23:54 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
Oct 22 12:23:54 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): ILLEGAL REQUEST asc:25,0
Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): Logical unit not supported
Oct 22 12:23:54 odie /kernel: (da4:ahc0:0:6:3): fatal error, failed to attach to device(da4:ahc0:0:6:3): removing device entry
Oct 22 12:23:54 odie /kernel: WARNING: / was not properly dismounted
Oct 22 12:24:00 odie lpd[151]: restarted
Oct 22 12:24:05 odie /kernel: PCM device 1 not installed.
Oct 22 12:24:06 odie dattape: dattape: Using tapedevice /dev/nrsa1
Oct 22 12:24:06 odie dattape: dattape: Listening to port 620
Oct 22 12:24:20 odie login: ROOT LOGIN (root) ON ttyv0
Oct 22 12:27:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64
Oct 22 12:27:23 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63
Oct 22 12:44:15 odie /kernel: Copyright (c) 1992-1998 FreeBSD Inc.
Oct 22 12:44:15 odie /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Oct 22 12:44:15 odie /kernel: The Regents of the University of California. All rights reserved.
Oct 22 12:44:15 odie /kernel: FreeBSD 3.0-RELEASE #0: Thu Oct 22 10:32:22 CEST 1998
Oct 22 12:44:15 odie /kernel: root@odie.lippe.de:/usr/src/sys/compile/GENERICupgrade
Oct 22 12:44:15 odie /kernel: Timecounter "i8254"  frequency 1193182 Hz  cost 3342 ns
Oct 22 12:44:15 odie /kernel: CPU: Pentium Pro (199.43-MHz 686-class CPU)
Oct 22 12:44:15 odie /kernel: Origin = "GenuineIntel"  Id = 0x619  Stepping=9
Oct 22 12:44:15 odie /kernel: Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
Oct 22 12:44:15 odie /kernel: real memory  = 67108864 (65536K bytes)
Oct 22 12:44:15 odie /kernel: avail memory = 62799872 (61328K bytes)
Oct 22 12:44:15 odie /kernel: Probing for devices on PCI bus 0:
Oct 22 12:44:15 odie /kernel: Correcting Natoma config for non-SMP
Oct 22 12:44:15 odie /kernel: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
Oct 22 12:44:15 odie /kernel: chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
Oct 22 12:44:15 odie /kernel: ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 14 on pci0.12.0
Oct 22 12:44:15 odie /kernel: ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
Oct 22 12:44:15 odie /kernel: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 15 on pci0.13.0
Oct 22 12:44:15 odie /kernel: ahc1: aic7880 Wide Channel A, SCSI Id
Oct 22 12:44:15 odie /kernel: =7, 16/255 SCBs
Oct 22 12:44:15 odie /kernel: vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 255 on pci0.14.0
Oct 22 12:44:15 odie /kernel: Probing for devices on the ISA bus:
Oct 22 12:44:15 odie /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Oct 22 12:44:15 odie /kernel: sc0: VGA color <8 virtual consoles, flags=0x0>
Oct 22 12:44:15 odie /kernel: psm0 at 0x60-0x64 irq 12 on motherboard
Oct 22 12:44:15 odie /kernel: psm0: model Generic PS/2 mouse, device ID 0
Oct 22 12:44:16 odie /kernel: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
Oct 22 12:44:16 odie /kernel: sio0: type 16550A
Oct 22 12:44:16 odie /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Oct 22 12:44:16 odie /kernel: sio1: type 16550A
Oct 22 12:44:16 odie /kernel: lpt0 at 0x378-0x37f irq 7 on isa
Oct 22 12:44:16 odie /kernel: lpt0: Interrupt-driven port
Oct 22 12:44:16 odie /kernel: lp0: TCP/IP capable interface
Oct 22 12:44:16 odie /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Oct 22 12:44:16 odie /kernel: fdc0: FIFO enabled, 8 bytes threshold
Oct 22 12:44:16 odie /kernel: fd0: 1.44MB 3.5in
Oct 22 12:44:16 odie /kernel: fd1: 1.2MB 5.25in
Oct 22 12:44:16 odie /kernel: apm0 on isa
Oct 22 12:44:16 odie /kernel: apm: found APM BIOS version 1.2
Oct 22 12:44:16 odie /kernel: npx0 on motherboard
Oct 22 12:44:16 odie /kernel: npx0: INT 16 interface
Oct 22 12:44:16 odie /kernel: sb0 at 0x220 irq 5 drq 1 on isa
Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster 16 4.13>
Oct 22 12:44:16 odie /kernel: sbxvi0 at ? drq 5 on isa
Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster 16 4.13>
Oct 22 12:44:16 odie /kernel: sbmidi0 at 0x330 on isa
Oct 22 12:44:16 odie /kernel: snd0: <SoundBlaster MPU-401>
Oct 22 12:44:16 odie /kernel: awe0 at 0x620 on isa
Oct 22 12:44:16 odie /kernel: AWE32: not detected
Oct 22 12:44:16 odie /kernel:
Oct 22 12:44:16 odie /kernel: ccd0-3: Concatenated disk drivers
Oct 22 12:44:16 odie /kernel: Waiting 8 seconds for SCSI devices to settle
Oct 22 12:44:16 odie /kernel: sa0 at ahc0 bus 0 target
Oct 22 12:44:16 odie /kernel: 3 lun 0
Oct 22 12:44:16 odie /kernel: sa0: <ARCHIVE Python 28388-XXX 5ACB> Removable Sequential Access SCSI2 device
Oct 22 12:44:16 odie /kernel: sa0: 7.812MB/s transfers (7.812MHz, offset 15)
Oct 22 12:44:16 odie /kernel: sa1 at ahc0 bus 0 target 6 lun 0
Oct 22 12:44:16 odie /kernel: sa1: <HP C1533A 9503> Removable Sequential Access SCSI2 device
Oct 22 12:44:16 odie /kernel: sa1: 10.0MB/s transfers (10.0MHz, offset 8)
Oct 22 12:44:16 odie /kernel: da1 at ahc0 bus 0 target 1 lun 0
Oct 22 12:44:16 odie /kernel: da1: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI2 device
Oct 22 12:44:16 odie /kernel: da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
Oct 22 12:44:16 odie /kernel: da1: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
Oct 22 12:44:16 odie /kernel: da2 at ahc1 bus 0 target 8 lun 0
Oct 22 12:44:16 odie /kernel: da2: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device
Oct 22 12:44:16 odie /kernel: da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
Oct 22 12:44:16 odie /kernel: da2: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C)
Oct 22 12:44:16 odie /kernel: da3 at ahc1 bus 0 target 9 lun 0
Oct 22 12:44:16 odie /kernel: da3: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI2 device
Oct 22 12:44:16 odie /kernel: da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
Oct 22 12:44:16 odie /kernel: da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C)
Oct 22 12:44:16 odie /kernel: da0 at ahc0 bus 0 target 0 lun 0
Oct 22 12:44:16 odie /kernel: da0: <SEAGATE ST15150N 0017> Fixed D
Oct 22 12:44:16 odie /kernel: irect Access SCSI2 device
Oct 22 12:44:16 odie /kernel: da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
Oct 22 12:44:16 odie /kernel: da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
Oct 22 12:44:16 odie /kernel: cd0 at ahc0 bus 0 target 4 lun 0
Oct 22 12:44:16 odie /kernel: cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI2 device
Oct 22 12:44:16 odie /kernel: cd0: 10.0MB/s transfers (10.0MHz, offset 15)
Oct 22 12:44:16 odie /kernel: cd0: cd present [304767 x 2048 byte records]
Oct 22 12:44:16 odie /kernel: ch0 at ahc0 bus 0 target 5 lun 0
Oct 22 12:44:16 odie /kernel: ch0: <ADIC DAT AutoChanger 0360> Removable Changer SCSI2 device
Oct 22 12:44:16 odie /kernel: ch0: 3.300MB/s transfers
Oct 22 12:44:16 odie /kernel: ch0: 12 slots, 1 drive, 1 picker, 1 portal
Oct 22 12:44:16 odie /kernel: changing root device to da0s2a
Oct 22 12:44:16 odie /kernel: WARNING: / was not properly dismounted
Oct 22 12:44:19 odie lpd[196]: restarted
Oct 22 12:44:24 odie /kernel: PCM device 1 not installed.
Oct 22 12:44:25 odie dattape: dattape: Using tapedevice /dev/nrsa1
Oct 22 12:44:25 odie dattape: dattape: Listening to port 620
Oct 22 12:44:46 odie login: ROOT LOGIN (root) ON ttyv0
Oct 22 12:46:21 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 64
Oct 22 12:46:22 odie /kernel: (da0:ahc0:0:0:0): tagged openings now 63
Oct 22 12:46:44 odie login: ROOT LOGIN (root) ON ttyv1
Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 64
Oct 22 13:03:25 odie /kernel: (da2:ahc1:0:8:0): tagged openings now 63
Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 64
Oct 22 13:03:55 odie /kernel: (da3:ahc1:0:9:0): tagged openings now 63
Oct 22 13:31:37 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 64
Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 62
Oct 22 13:31:38 odie /kernel: (da1:ahc0:0:1:0): tagged openings now 61

--==_Exmh_-3533862440
Content-Type: text/plain ; name="ODIE"; charset=us-ascii
Content-Description: ODIE
Content-Disposition: attachment; filename="ODIE"

#
# ODIE kernel config file
#

machine		"i386"
cpu		"I686_CPU"		# aka Pentium Pro(tm)
ident		ODIE
maxusers	32

config		kernel	root on da1

# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
#    strings /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL
#
options         INCLUDE_CONFIG_FILE     # Include this file in kernel

# Create a SMP capable kernel (mandatory options):
#options         SMP             #Smmetric Multiprocessor Kernel
#options         APIC_IO         #Smmetric (APIC) I/O

# Lets always enable the kernel debugger for SMP.
options         DDB

#
# Certain applications can grow to be larger than the 128M limit
# that FreeBSD initially imposes.  Below are some options to
# allow that limit to grow to 256MB, and can be increased further
# with changing the parameters.  MAXDSIZ is the maximum that the
# limit can be set to, and the DFLDSIZ is the default value for
# the limit.  You might want to set the default lower than the
# max, and explicitly set the maximum with a shell command for processes
# that regularly exceed the limit like INND.
#
options         "MAXDSIZ=(256*1024*1024)"
options         "DFLDSIZ=(256*1024*1024)"

options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
#options		NFS			#Network Filesystem
#options		MFS			#Memory Filesystem
#options		MSDOSFS			#MSDOS Filesystem
#options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
#options		MROUTING		#Multicast routing
options 	MAXCONS=8		#Number of max. allowed virt. consoles
options         QUOTA                   #enable disk quotas
#options		COMPAT_LINUX		#Linux Emulator
#options		"COMPAT_IBCS2"		#SCO & SYSV Emulator
options		PERFMON			#Pentium (Pro) performance counters
options         SYSVSHM                 #System V shared memory support
options         SYSVSEM                 #System V Semophore support
options         SYSVMSG                 #System V Message support
options         UCONSOLE		#Allow ordinary users to take the
					#console - this is useful for X.
options		XSERVER			#include code for XFree86

options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor

options		SC_HISTORY_SIZE=512	#number of history buffer lines

#
# KTRACE enables the system-call tracing facility ktrace(2).
#
options         KTRACE                  #kernel tracing

#
# ISA devices
#
controller	isa0

options         "AUTO_EOI_1"
options         "AUTO_EOI_2"

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1

device 		apm0 	at isa?

#controller      pnp0

#
# PCI devices
#
controller	pci0

options         SCSI_DELAY=8000		# Be pessimistic about Joe SCSI device
options		SCSI_REPORT_GEOMETRY

# Adaptec 2940[U/UW] SCSI Adapter
controller	ahc0
controller      ahc1

# Devices connected
device		ch0
device		da0
device		sa0
device		cd0
device		pass0

# The syntax for wiring down devices is:
# AH2940 U
controller	scbus0	at ahc0
# Seagate ST15150N
disk            da0	at scbus0 target 0
disk            da1	at scbus0 target 1
# Seagate Python 28388, DDS2
tape            sa0	at scbus0 target 3
# PIONEER CD-ROM DR-U12X auf ID 4
device          cd0	at scbus?
# Adic Autochanger mit HP DAT, DDS2
device		ch0	at scbus0 target 5
tape            sa1	at scbus0 target 6

# AH 2940 UW
controller	scbus1	at ahc1
# Seagate ST32171W
disk            da2	at scbus1 target 8
disk            da3	at scbus1 target 9

# ps2 mouse
device		psm0	at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr

device		npx0	at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr

# sio1 (dcf-77)
# serial console
options         BREAK_TO_DEBUGGER	# a BREAK on a comconsole goes to DDB
options         CONSPEED=19200		#default speed for serial console (default 9600)
device		sio0	at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device ed0 at isa? port 0x280 net irq ? iomem 0xe8000 vector edintr

#
# Audio drivers: `snd', `sb', `pas', `gus', `pca'
#
controller	snd0
device	sb0	at isa? port 0x220 irq 5 drq 1 vector sbintr
device	sbxvi0	at isa? drq 5
device	sbmidi0 at isa? port 0x330
device	awe0	at isa? port 0x620

#device pcm0	at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr

pseudo-device	loop
pseudo-device	ether
pseudo-device   ccd		4
pseudo-device   snp             3  #Snoop device - to look at pty/vty/etc..
pseudo-device   bpfilter	4
pseudo-device	sl		2
# ijppp uses tun instead of ppp device
pseudo-device	ppp		2
pseudo-device	tun		3
pseudo-device	pty		128
pseudo-device	gzip		#Exec gzipped a.out's
pseudo-device   vn              #Vnode driver (turns a file into a device)

# i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
# note that the ``options'' and ``device'' lines must BOTH be defined !

# Teles S0/16.3
options "TEL_S0_16_3"
device  isic0 at isa? port 0xd80 net irq 10 flags 0x04 vector isicintr

# i4b passive cards D channel handling
# Q.921
pseudo-device   "i4bq921"
# Q.931
pseudo-device   "i4bq931"

# common passive and active layer 4
# layer 4
pseudo-device   "i4b"

# userland driver to do ISDN tracing (for passive cards oly)
pseudo-device   "i4btrc"        4
# userland driver to control the whole thing
pseudo-device   "i4bctl"
# userland driver for access to raw B channel
pseudo-device   "i4brbch"       4
# userland driver for telephony
pseudo-device   "i4btel"        2
# network driver for IP over raw HDLC ISDN
pseudo-device   "i4bipr"        4
# enable VJ header compression detection for ipr i/f
options         IPR_VJ
# network driver for sync PPP over ISDN
pseudo-device   "i4bisppp"      4
pseudo-device   sppp            4

--==_Exmh_-3533862440
Content-Type: text/plain ; name="xdm.log"; charset=us-ascii
Content-Description: xdm.log
Content-Disposition: attachment; filename="xdm.log"


XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 3.0-980221-SNAP i386 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
      tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
      tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
      clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
      clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
      clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
      oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
      cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
      s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
      ct64300, generic
Using syscons driver with X support (version 2.0)
(using VT number 5)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) module xf86Jstk.so successfully loaded from /usr/X11R6/lib/modules
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us-de"
(**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "Matrox Millenium 8MB"
(**) SVGA: Monitor ID: "ELSA ECOMO 21H95"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/freefont,/usr/local/lib/pcemu/font"
(--) SVGA: PCI: Matrox MGA 2064W rev 1, Memory @ 0xe0000000, 0xe1000000
(--) SVGA: Linear framebuffer at 0xE1000000
(--) SVGA: MMIO registers at 0xE0000000
(--) SVGA: Video BIOS info block at 0x000c7d00
(--) SVGA: chipset:  mga2064w
(--) SVGA: videoram: 8192k
(**) SVGA: Option "hw_cursor"
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Option "power_saver"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 220.000 MHz
(**) SVGA: Mode "1280x1024": mode clock = 157.500
(**) SVGA: Mode "1152x864": mode clock = 137.650
(**) SVGA: Mode "1024x768": mode clock = 115.500
(**) SVGA: Mode "800x600": mode clock =  69.650
(**) SVGA: Mode "640x480": mode clock =  45.800
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: MCLK set to 50.000 MHz
(--) SVGA: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 10 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments
xdm error (pid 335): fatal IO error 32 (Broken pipe)
X connection to :0.0 broken (explicit kill or server shutdown).

--==_Exmh_-3533862440--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199810221222.OAA01073>