Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Feb 2003 17:45:22 -0500 (EST)
From:      Trish Lynch <trish@bsdunix.net>
To:        John Baldwin <jhb@FreeBSD.ORG>
Cc:        Slawek Zak <zaks@prioris.mini.pw.edu.pl>, freebsd-current@FreeBSD.ORG
Subject:   RE: HyperThreading not working?
Message-ID:  <20030226174154.G830-100000@femme>
In-Reply-To: <XFMail.20030226140551.jhb@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 26 Feb 2003, John Baldwin wrote:

>
> On 26-Feb-2003 Slawek Zak wrote:
> > Hi,
> >
> > I'm in the process of installing 5.0-RELEASE-p3 on a Dell PowerEdge
> > 2600 server. It has two HyperThreading Xeon 2.4Ghz processors, but
> > HyperThreading is not working in FreeBSD. I guess that four
> > processors should be visible in the system after boot. Yes - I've
> > enabled `Logical Processors' in BIOS. BIOS revision is the latest
> > available.
> >
> > Any thoughts? I attach full dmesg and mptable output. Kernel
> > config too.
>
> 5.0 doesn't support HyperThreading.  The upcoming 5.1 and 4.8 releases
> will support it.
>

it doesn't? I have a 5.0-R box that surely does support HTT.

-bash-2.05b$ uname -a
FreeBSD ecelerity-s1-3 5.0-RELEASE FreeBSD 5.0-RELEASE #3: Mon Jan 20
16:59:08 EST 2003
root@ecelerity-s1-3:/usr/obj/usr/src/sys/ECELERITY-5.0  i386

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #3: Mon Jan 20 16:59:08 EST 2003
    root@ecelerity-s1-3:/usr/obj/usr/src/sys/ECELERITY-5.0
Preloaded elf kernel "/boot/kernel/kernel" at 0xc069a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc069a0a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium 4 (1796.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P
GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>>
real memory  = 1073217536 (1023 MB)
avail memory = 1034719232 (986 MB)
Programming 24 pins in IOAPIC #0
OAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
 cpu2 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x00178020, at 0xfec80000
 io2 (APIC): apic id:  4, version: 0x00178020, at 0xfec80400
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 24 entries at 0xc00fde40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
attached
)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
attached
)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
IOAPIC #1 intpin 4 -> irq 16
IOAPIC #1 intpin 5 -> irq 17
IOAPIC #1 intpin 7 -> irq 18
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem
0xfc240000-0xfc240fff irq 16 at device 2.0 on pci3
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem
0xfc241000-0xfc241fff irq 17 at device 2.1 on pci3
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port
0x3800-0x381f
mem 0xfc200000-0xfc21ffff,0xfc220000-0xfc23ffff irq 18 at device 4.0 on
pci3
em0:  Speed:100 Mbps  Duplex:Full
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f
irq 2
at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f
irq 10
 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f
irq 11
 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
IOAPIC #0 intpin 17 -> irq 19
pci4: <display, VGA> at device 1.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x4400-0x443f mem
0xfc300000-0xfc31
ffff,0xfc321000-0xfc321fff irq 19 at device 2.0 on pci4
fxp0: Ethernet address 00:30:48:24:da:d4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x2060-0x206f,0x374-0x377,0x170-0x1
77,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfc000000-0xfc0003ff irq 0 at device 31.1
on pci
0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem
0xe0000-0xe3fff,0xdc000-0xdffff,0xc8000-0xc8fff,0xc
0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enable
d
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enable
d
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a

-Trish

--
Trish Lynch					   trish@bsdunix.net
Ecartis Core Team 			      trish@listmistress.org
EFNet IRC Operator @ efnet.demon.co.uk		      AilleCat@EFNet
EFNet IRC Operator/SysAdmin @ irc.dkom.at             Aille_AT@EFNet
Key fingerprint = 781D 2B47 AA4B FC88 B919  0CD6 26B2 1D62 6FC1 FF16


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030226174154.G830-100000>