Date: Sun, 14 Jul 2002 11:51:00 -0700 (PDT) From: Vaclav Musil <musil@kn.vutbr.cz> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/40564: SMP kernel panic on Intel SE7500CW2 Message-ID: <200207141851.g6EIp0xQ011537@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 40564 >Category: i386 >Synopsis: SMP kernel panic on Intel SE7500CW2 >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jul 14 12:00:08 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Vaclav Musil >Release: 4.6 >Organization: VUT v Brne >Environment: FreeBSD intel.kn.vutbr.cz 4.6-STABLE FreeBSD 4.6-STABLE #3: Sat Jul 13 19:35:25 GMT 2002 root@intel.kn.vutbr.cz:/usr/obj/usr/src/sys/01 i386 >Description: I'm trying to use SMP kernel on system http://www.intel.com/support/motherboards/server/SE7500CW2/ the kernel is not able to use second CPU. ======================================================== system board: Intel SE7500CW2 chipset: E7500 bios: Phoenix 4.0 release 6.0 version 1.11 CPU: 2 pieces of Intel Xeon 1.8GHz/512kB/FSB400MHz ======================================================== dmesg output: (look at line 16) ---------------- i386 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #3: Sat Jul 13 19:35:25 GMT 2002 root@intel.kn.vutbr.cz:/usr/obj/usr/src/sys/01 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 1073217536 (1048064K bytes) avail memory = 1039933440 (1015560K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 AP #1 (PHY# 6) failed! panic y/n? [y] FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 6, version: 0x00000000, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Preloaded elf kernel "kernel" at 0xc047e000. md0: Malloc disk Using $PIR table, 17 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 17 -> irq 2 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 pci2: <PCI bus> on pcib2 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 IOAPIC #2 intpin 0 -> irq 11 pci3: <PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.8> port 0x7000-0x701f mem 0xfc200000-0xfc21ffff,0xfc220000-0xfc23ffff irq 11 at device 1.0 on pci3 em0: Speed:N/A Duplex:N/A pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 IOAPIC #0 intpin 21 -> irq 12 IOAPIC #0 intpin 20 -> irq 16 IOAPIC #0 intpin 23 -> irq 17 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 12 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x8400-0x843f mem 0xfc300000-0xfc31ffff,0xfc341000-0xfc341fff irq 16 at device 4.0 on pci4 fxp0: Ethernet address 00:02:b3:b0:ea:cd inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x8440-0x847f mem 0xfc320000-0xfc33ffff,0xfc342000-0xfc342fff irq 17 at device 5.0 on pci4 fxp1: Ethernet address 00:02:b3:b0:eb:8a inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x6c20-0x6c2f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 2 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe3800-0xe3fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, unlimited logging ad0: 76319MB <WDC WD800BB-22CAA0> [155061/16/63] at ata0-master UDMA100 acd0: CDROM <LTN526D> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a >How-To-Repeat: compile+install SMP kernel and reboot. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207141851.g6EIp0xQ011537>