Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Jun 1999 09:15:49 -0500
From:      "Andrew Fleming" <afleming@tiger.fhsu.edu>
To:        freebsd-questions@FreeBSD.ORG
Subject:   SCSI card / Drive errors
Message-ID:  <86256799.004E5ADC.00@tiger.fhsu.edu>

next in thread | raw e-mail | index | archive | help


Help!

I recently upgraded a FreeBSD 2.27 system to 3.1.  After the upgrade I started
seeing this message show up.  Usually when it shows up it gives me the same
message multiple times, and the system has locked up a number of times after
receiving this message.

 kernel log messages:
> TPHASE == 0x1, SEQADDR == 0x9
> (da0:ahc0:0:0:0): Queuing a BDR SCB
> (da0:ahc0:0:0:0): Bus Device Reset Message Sent
> (da0:ahc0:0:0:0): no longer in timeout, status = 353
> Unexpected busfree.  LASTPHASE == 0xa0
> SEQADDR == 0x155
> (da0:ahc0:0:0:0): SCB 0x10 - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0xb
> (da0:ahc0:0:0:0): Queuing a BDR SCB
> (da0:ahc0:0:0:0): Bus Device Reset Message Sent
> (da0:ahc0:0:0:0): no longer in timeout, status = 353
> Unexpected busfree.  LASTPHASE == 0xa0
> SEQADDR == 0x155
> (da0:ahc0:0:0:0): SCB 0x1d - timed out while idle, LASTPHASE == 0x1, SEQADDR
== 0x9

 If I add at least 15 users in a row with the pw command, I can get it to happen
 every time  I think it is a problem with the
SCSI Card, Driver, or Hard Drive.  Can anyone verify this?  Do I need to rebuild
 the kernel with the Old SCSI driver?
Do I have a SCSI controller, or Hard Drive going bad?    Any suggestions about
what is going on would be appreciated.

Thanks

Andrew Fleming
afleming@tiger.fhsu.edu




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86256799.004E5ADC.00>