Date: Thu, 3 Oct 2002 17:08:13 +0100 From: Michael McGoldrick <mmcgoldrick@linuxdriven.net> To: current@freebsd.org Subject: GEOM Message-ID: <20021003160812.GA663@uriel.fakedomain.net>
next in thread | raw e-mail | index | archive | help
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Seems to work fine on this machine (dmesg attached) apart from an apparently
spurious kerneldump and a couple of odd lines in the dmesg.
--
Michael McGoldrick: mmcgoldrick@linuxdriven.net
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=geom
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #22: Thu Oct 3 15:45:12 BST 2002
root@uriel.fakedomain.net:/usr/obj/usr/src/sys/URIEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0536000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc05360a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05360f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 546618647 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (546.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 124379136 (121464K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Acer M1615 > on motherboard
ACPI-0466: *** Error: GPE0 block overlaps the GPE1 block
acpi0: could not enable ACPI: AE_BAD_VALUE
device_probe_and_attach: acpi0 attach returned 6
Using $PIR table, 8 entries at 0xc00f7900
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x90800000-0x90800fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x90500000-0x905fffff,0x90400000-0x90400fff irq 5 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x8400-0x840f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0x82100000-0x821000ff irq 10 at device 19.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:60:67:76:6e:bf
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pnpbios: error 0/82 getting device count/size limit
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master UDMA33
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata1-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRD-8120B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad2s2a
0000 00 01 c1 ff 0b fe ff ff 3f 00 00 00 3d 2e 53 02 |........?...=.S.|
[0] f:00 typ:11 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:39005757
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Kerneldump off=5373557760 len=524288000
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xc24e3cf0, 0) error 19
--Nq2Wo0NMKNjxTN9z--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021003160812.GA663>