Date: Wed, 15 Jan 2003 18:59:37 +0100 From: Ralf Schumacher <ralf_schumacher@gmx.net> To: current@freebsd.org Subject: privileged instruction fault with 5.0-RC3 Message-ID: <3E25A189.5040804@gmx.net>
next in thread | raw e-mail | index | archive | help
Hi!
As stated in the subject.
I get this error when booting 5.0-RC3.
Can someone give me a clue?
Best Regards
Ralf Schumacher
->
normal:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC3 #0: Fri Jan 10 23:09:54 GMT 2003
root@cypress:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0aab000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0aab0a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0aab0ec.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2859416320 Hz
CPU: Pentium 4 (2859.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
avail memory = 510132224 (486 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062675c
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31
Using $PIR table, 10 entries at 0xc00fdeb0
acpi0: power button is handled as a fixed feature programming model
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xd8000000-0xdbffffff at
device 0.0
on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f
irq 5 at d
evice 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB Controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Microsoft SideWinder Precision 2 Joystick, rev 1.10/1.05, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f
irq 10 at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f
irq 11 at
device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem
0xdf000000-0xdf0000ff ir
q 10 at device 0.0 on pci2
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: xx:xx:xx:xx:xx:xx <- Edited by me
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia> at device 5.0 (no driver attached)
atapci0: <HighPoint HPT372 ATA133 controller> port 0xa400-0xa4ff,
0xa000-0xa003,0
x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at device 6.0 on pci2
ata2: at 0x9400 on atapci0
ata3: at 0x9c00 on atapci0
isab0: <PCI-ISA brige> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0
x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Fatal trap 1: privileged instruction fault while in vm86 mode
instruction pointer = 0xcc00:0xe3
stack pointer = 0x0:0xff8
frame pointer = 0x0:0x0
code segment = base 0x0, limit 0x0, type 0x0
DPL 0, pres 0, def32 0, gran 0
processor eflags = interrupt enabled, resume, vm86, IOPL = 0
current process = 0 (swapper)
trap number = 1
panic: privileged instruction fault
->
with "unset acpi_load":
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC3 #0: Fri Jan 10 23:09:54 GMT 2003
root@cypress:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a60000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0a600a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2859415228 Hz
CPU: Pentium 4 (2859.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
avail memory = 510455808 (486 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062675c
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 10 entries at 0xc00fdeb0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xd8000000-0xdbffffff at
device 0.0
on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f
irq 5 at d
evice 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB Controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Microsoft SideWinder Precision 2 Joystick, rev 1.10/1.05, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f
irq 10 at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f
irq 11 at
device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem
0xdf000000-0xdf0000ff ir
q 10 at device 0.0 on pci2
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: xx:xx:xx:xx:xx:xx <- Edited by me
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia> at device 5.0 (no driver attached)
atapci0: <HighPoint HPT372 ATA133 controller> port 0xa400-0xa4ff,
0xa000-0xa003,0
x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at device 6.0 on pci2
ata2: at 0x9400 on atapci0
ata3: at 0x9c00 on atapci0
isab0: <PCI-ISA brige> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0
x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Fatal trap 1: privileged instruction fault while in vm86 mode
instruction pointer = 0xcc00:0xe3
stack pointer = 0x0:0xff8
frame pointer = 0x0:0x0
code segment = base 0x0, limit 0x0, type 0x0
DPL 0, pres 0, def32 0, gran 0
processor eflags = interrupt enabled, resume, vm86, IOPL = 0
current process = 0 (swapper)
trap number = 1
panic: privileged instruction fault
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E25A189.5040804>