Date: Thu, 12 Aug 2010 10:22:55 -0700 (PDT) From: Youri Adonis <vrtuff@yahoo.com> To: Luiz Otavio O Souza <lists.br@gmail.com> Cc: freebsd-mips@freebsd.org Subject: Reporting success with FreeBSD on Netgear WNDR3700 Message-ID: <40010.49671.qm@web33207.mail.mud.yahoo.com> In-Reply-To: <746AF81F-05D4-400A-842C-75B3346E915E@gmail.com> References: <AANLkTimykzp%2Bv-x1V_u%2Bp3Q9BUW=vdbv84D0e%2BTwJ1Em@mail.gmail.com> <AANLkTimXKCPUWvmitNADEakCRxDks51Bd3-0MqhR=kwb@mail.gmail.com> <AANLkTikiTun2GXNnLs%2BwftBBJqjaMr73CXGghbgcLkW5@mail.gmail.com> <AANLkTi=xnCRZPdM8b0kwLjSM_0RPMLf2D2wZp%2BHgFFYy@mail.gmail.com> <AANLkTi=2x%2BSkzUZLL9wWbfsCHL4NfwUwFonop2_zwj6j@mail.gmail.com> <AANLkTim8r9xEMYz9PO%2BYwYEyVphQQ%2Bd4vZFhFZsVE9Hx@mail.gmail.com> <AANLkTi==cx1EVOPH-zto9bVa4fBb_Hgz5RMjmt%2BpUfkM@mail.gmail.com> <AANLkTi=cj5boi_wjqJYr10r4tNEG14mmOJFfhsLtjWHH@mail.gmail.com> <677389.94707.qm@web33207.mail.mud.yahoo.com> <746AF81F-05D4-400A-842C-75B3346E915E@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Luiz.
I can only get arge1 detected with 0xa0 with a bogus MAC address, not the
actual one. Nothing came up for arge0.
Flash is being ack'd as well
Thanks
Youri
See below dmesg:
**************************************************************
Starting kernel ...
platform frequency: 680000000
arguments:
a0 = 00000006
a1 = a3f5ffb0
a2 = a3f60450
a3 = 00000008
Cache info:
picache_stride = 4096
picache_loopcount = 16
pdcache_stride = 4096
pdcache_loopcount = 8
cpu0: MIPS Technologies processor v116.147
MMU: Standard TLB, 16 entries
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config3=0x20
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #61: Thu Aug 12 16:59:08 UTC 2010
root@hollu.lan:/usr/wndr3700-current-obj/mips.mips/usr/src/freebsd-current/src/sys/WNDR3700
mips
real memory = 67108864 (65536K bytes)
avail memory = 59379712 (56MB)
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
clock0: [FILTER]
Timecounter "MIPS32" frequency 340000000 Hz quality 800
Event timer "MIPS32" frequency 340000000 Hz quality 800
apb0 at mem 0x18000000-0x18ffffff irq 4 on nexus0
apb0: [FILTER]
uart0: <16550 or compatible> on apb0
uart0: [FILTER]
uart0: console (115200,n,8,1)
ohci0: <AR71XX integrated OHCI controller> on apb0
ohci0: [ITHREAD]
usbus0 on ohci0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000000-0x1bffffff irq 1
on nexus0
ehci0: [ITHREAD]
usbus1: set host controller mode
usbus1: EHCI version 1.0
usbus1: set host controller mode
usbus1: <AR71XX Integrated USB 2.0 controller> on ehci0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0xb9000000-0xb9000fff
irq 2 on nexus0
arge0: No PHY specified, using mask 16
arge0: MII without any phy!
device_attach: arge0 attach returned 6
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0xba000000-0xba000fff
irq 3 on nexus0
arge1: Ethernet address: 62:73:64:9b:19:68
arge1: [FILTER+ITHREAD]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
mx25l0: mx25ll64, sector 65536 bytes, 128 sectors
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
cryptosoft0: <software crypto> on nexus0
Starting kernel event timers: MIPS32 @ 2000Hz, NONE @ 0Hz
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding enabled,
default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Atheros> at usbus0
uhub0: <Atheros OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Atheros> at usbus1
uhub1: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/da0s1
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:
set vfs.root.mountfrom.options=rw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=
vfs.root.mountfrom.options=
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. zfs:tank
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
----- Original Message ----
From: Luiz Otavio O Souza <lists.br@gmail.com>
To: false <vrtuff@yahoo.com>
Cc: freebsd-mips@freebsd.org
Sent: Thu, August 12, 2010 9:33:08 AM
Subject: Re: Reporting success with FreeBSD on Netgear WNDR3700
On Aug 12, 2010, at 12:21 AM, false wrote:
> In my search to run pf from a consumer device.
> It is closely related to RB450
>
> full dmesg:
>
> ************************************************************
>
> Starting kernel ...
>
> platform frequency: 680000000
> arguments:
> a0 = 00080410
> a1 = 804448ac
> a2 = 00000010
> a3 = 804b2180
> Cache info:
> picache_stride = 4096
> picache_loopcount = 16
> pdcache_stride = 4096
> pdcache_loopcount = 8
> cpu0: MIPS Technologies processor v116.147
> MMU: Standard TLB, 16 entries
> L1 i-cache: 4 ways of 512 sets, 32 bytes per line
> L1 d-cache: 4 ways of 256 sets, 32 bytes per line
> Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
> Config3=0x20
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-CURRENT #16: Wed Aug 11 06:27:58 UTC 2010
>
>root@hollu.lan:/usr/wndr3700-current-obj/mips.mips/usr/src/freebsd-current/src/sys/WNDR3700
>0
> mips
> real memory = 67108864 (65536K bytes)
> avail memory = 59437056 (56MB)
> nexus0: <MIPS32 root nexus>
> Either maddr or msize hint is missing for apb0
> Either maddr or msize hint is missing for pcib0
> clock0: <Generic MIPS32 ticker> on nexus0
> clock0: [FILTER]
> Timecounter "MIPS32" frequency 340000000 Hz quality 800
> Event timer "MIPS32" frequency 340000000 Hz quality 800
> apb0 at irq 4 on nexus0
> apb0: [FILTER]
> uart0: <16550 or compatible> on apb0
> uart0: [FILTER]
> uart0: console (115200,n,8,1)
> ohci0: <AR71XX integrated OHCI controller> on apb0
> ohci0: [ITHREAD]
> usbus0 on ohci0
> ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000000-0x1bffffff irq
>3
>
> on nexus0
> ehci0: [ITHREAD]
> usbus1: set host controller mode
> usbus1: EHCI version 1.0
> usbus1: set host controller mode
> usbus1: <AR71XX Integrated USB 2.0 controller> on ehci0
> pcib0 at irq 0 on nexus0
> pcib0: [FILTER]
> pci0: <PCI bus> on pcib0
> pci0: <old, non-VGA display device> at device 0.0 (no driver attached)
> pci0: <network, ethernet> at device 17.0 (no driver attached)
> pci0: <network, ethernet> at device 18.0 (no driver attached)
> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
> spibus0: <spibus bus> on spi0
> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
> cryptosoft0: <software crypto> on nexus0
> Starting kernel event timers: MIPS32 @ 2000Hz, NONE @ 0Hz
> Timecounters tick every 1.000 msec
> IPsec: Initialized Security Association Processing.
> ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding enabled,
>
> default to accept, logging disabled
> DUMMYNET 0 with IPv6 initialized (100409)
> load_dn_sched dn_sched RR loaded
> load_dn_sched dn_sched WF2Q+ loaded
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1: <Atheros> at usbus0
> uhub0: <Atheros OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Atheros> at usbus1
> uhub1: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> Trying to mount root from ufs:da0s1
> ROOT MOUNT ERROR:
> If you have invalid mount options, reboot, and first try the following from
> the loader prompt:
>
> set vfs.root.mountfrom.options=rw
>
> and then remove invalid mount options from /etc/fstab.
>
> Loader variables:
> vfs.root.mountfrom=
> vfs.root.mountfrom.options=
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. zfs:tank
> eg. ufs:/dev/da0s1a
> eg. cd9660:/dev/acd0
> This is equivalent to: mount -t cd9660 /dev/acd0 /
>
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot>
>
> **************************************************
>
> Hopefully the board will help with getting the switch/ethernet/wifi working
>
> Thanks
> YA
Cool !
You should be able to use the arge1 interface (WAN port) by setting the correct
phy mask on hints (0x10 for arge1 on WNDR3700).
Looks like the arge0 is connected to a RTL8366 gigabit switch which, at least,
has a public available datasheet:
http://realtek.info/pdf/rtl8366_8369_datasheet_1-1.pdf
Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40010.49671.qm>