Date: Thu, 02 May 2002 22:32:58 -0400 From: Andrew Lankford <arlankfo@141.com> To: freebsd-stable@freebsd.org Subject: Latest stable appears to break waveplay, wavplay. Message-ID: <200205022033171.SM02232@141.com>
next in thread | raw e-mail | index | archive | help
I've found I can't play .wav files anymore since the last buildworld
a few hours ago. I don't know quite when it stopped working, but
waveplay and wavplay in ports just produces a "chit chit chit..." sound
to the speakers. writing .au files to /dev/audio works just fine,
writing .wav files to /dev/dsp plays everything at the veeery slooowly,
but that appears to be an improvement over last time I tried doing that.
All the games I've tried so far work as well as ever. Anyway, looks
to me like someone's been making a few changes to newpcm. Hope this is
useful feedback.
Andrew Lankford
#cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Creative CT5880-C> at io 0xd000 irq 5 (1p/1r/0v channels duplex)
(Ensoniq AudioPCI)
#dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-PRERELEASE #3: Thu May 2 21:40:44 EDT 2002
root@bogushost2:/usr/obj/usr/src/sys/ARL0402
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (737.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535736320 (523180K bytes)
avail memory = 502448128 (490672K bytes)
Preloaded elf kernel "kernel" at 0xc1218000.
Preloaded elf module "vesa.ko" at 0xc121809c.
Preloaded elf module "green_saver.ko" at 0xc1218138.
Preloaded elf module "snd_es137x.ko" at 0xc12181dc.
Preloaded elf module "snd_pcm.ko" at 0xc1218280.
Preloaded elf module "usb.ko" at 0xc1218320.
Preloaded elf module "ugen.ko" at 0xc12183bc.
Preloaded elf module "uhid.ko" at 0xc1218458.
Preloaded elf module "ums.ko" at 0xc12184f4.
Preloaded elf module "agp.ko" at 0xc1218590.
Preloaded elf module "md.ko" at 0xc121862c.
Preloaded md_image "/modules/mytmp.ko" at 0xc12186c8.
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc02b8362 (1000022)
VESA: Intel(R) 815 Chipset Video BIOS
Pentium Pro MTRR support enabled
md0: Preloaded image </modules/mytmp.ko> 15728640 bytes at 0xc03161c0
md1: Malloc disk
Using $PIR table, 10 entries at 0xc00f1310
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
sis0: <NatSemi DP83815 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 9 at device 9.0 on pci1
sis0: Ethernet address: 00:02:e3:1c:cf:9e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1
xl0: Ethernet address: 00:01:02:73:ee:49
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 5 at device 14.0 on pci1
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: Logitech Camera, rev 1.00/1.00, addr 3
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iicbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 5 packets/entry by default
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master PIO4
acd1: DVD-ROM <HITACHI DVD-ROM GD-7500> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200205022033171.SM02232>