Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Jul 2020 18:21:10 +0100
From:      Arthur Chance <freebsd@qeng-ho.org>
To:        Ernie Luzar <luzar722@gmail.com>
Cc:        "freebsd-questions@FreeBSD.org" <freebsd-questions@freebsd.org>
Subject:   Re: Command to create multiple virtual NIC
Message-ID:  <1f381b92-150c-14c0-ce51-e0addcd7b904@qeng-ho.org>
In-Reply-To: <5F0C8F94.6080207@gmail.com>
References:  <5F0BABA9.9090105@gmail.com> <CADy1Ce6tiZxri5x-4Q9bxC_DD7y5qJB=4AYm-0H0BeoWHv1=Bg@mail.gmail.com> <5F0C83B0.1060004@gmail.com> <CAOyJeZRPHq1bw+aq9sDoJsqMFfyy7yqh2LOhGm2RrWVwqQaaWw@mail.gmail.com> <5F0C8F94.6080207@gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 13/07/2020 17:45, Ernie Luzar wrote:
> Shamim Shahriar wrote:
>>
>>
>> On Mon, 13 Jul 2020, 16:54 Ernie Luzar, <luzar722@gmail.com
>> <mailto:luzar722@gmail.com>> wrote:
>>
>>     Kurt Buff - GSEC, GCIH wrote:
>>      > What are you trying to accomplish?
>>      >
>>      > On Sun, Jul 12, 2020 at 6:33 PM Ernie Luzar <luzar722@gmail.com
>>     <mailto:luzar722@gmail.com>> wrote:
>>      >> Hello List;
>>      >> I have hardware interface em0 and want to create em1 and em2.
>>      >> What is command to do that?
>>      >>
>>      >> Thanks
>>      >
>>
>>     Looking for command to create multiple virtual NICs to hand vlans
>>     off of.
>>     __________________
>>
>>
>>
>> https://www.freebsd.org/doc/handbook/network-vlan.html
>>
>> Does it answer your question?
>>
>> Regards
>>
> 
> NO it does not. It does not tell you what 192.168.20.20/24 is suppose to
> represent. Is that suppose to be the hosts public routables ip address
> or an ip address from one of the reserved private lan non-public
> routable ip address ranges.

Any address beginning 192.168 is an RFC 1918 private address (as are
10.* and 172.16-31.*). If you're not familiar with something that basic
you might want to read up a bit more about networking before getting
into vlans.


-- 
Fat Earther: One who believes the world is round but has put on too
much weight round the middle.



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?1f381b92-150c-14c0-ce51-e0addcd7b904>