Date: Sat, 28 Jun 2008 20:54:36 -0500 From: "Edwin L. Culp" <eculp@casasponti.net> To: freebsd-questions@freebsd.org Subject: Re: Howto get k3b to detect my Burner Message-ID: <20080628205436.57696utq5kx3stgk@pontinet.casasponti.net> In-Reply-To: <200806290934.29645.shinjii@maydias.com> References: <200806281902.47156.shinjii@maydias.com> <200806282215.33399.shinjii@maydias.com> <20080628073503.11496ruvfwxy3x0c@pontinet.casasponti.net> <200806290934.29645.shinjii@maydias.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Warren Liddell <shinjii@maydias.com> escribi=F3: >> Your running kernel is compiled with the "device atapicam" option >> because AFAIK k3b only works with scsi. > yes i have that in my kernel > >> I have the following lines in this computers /etc/devfs.conf >> > link acd0 cdrom > link acd0 cd0 > perm acd0 0777 > perm cd0 0777 > perm xpt0 0777 > perm pass0 0777 > > i have the above in my devfs file > >> I am running > > cdrtools-devel > k3b-1.0.4_3 > > I also have vfs.usermount=3D1 set in my sysctl.conf > > I have a line in my fstab > /dev/cd0 /cdrom cd9660 ro,noauto 0 0 > /dev/cd0 /usr/home/<user>/cdrom cd9660 ro,noauto,nodev,nos= uid > 0 0 > > And yet with all this, it dosent detect it and wheni try to manually add t= he > device through configure in k3b it dosent see it. > > Since adding atapicam in the kernel rather then a manual load my dmesg has > this error... > > acd0: DVDR <TSSTcorp CDDVDW SH-S203D/SB00> at ata2-master SATA150 > pcm0: <HDA Codec: Realtek ALC883> > pcm0: <HDA Driver Revision: 20071129_0050> > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <LEXAR JUMPDRIVE SECURE 3000> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: 991MB (2030592 512 byte sectors: 64H 32S/T 991C) > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <TSSTcorp CDDVDW SH-S203D SB00> Removable CD-ROM SCSI-0 device > cd0: 3.300MB/s transfers > cd0: cd present [278528 x 2048 byte records] It doesn't look any worse than my working DVDR and DVDROM. acd1: FAILURE - READ_BIG HARDWARE ERROR asc=3D0x3e ascq=3D0x02 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 I don't think that is the problem. Have you tried it as root just as =20 a test even though it gives you warnings. I don't know what else to suggest right now. ed > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.or= g" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080628205436.57696utq5kx3stgk>