Date: Sat, 4 Oct 2014 14:06:53 +0200 From: Baptiste Daroussin <bapt@FreeBSD.org> To: xtremyst inxtremo <xtremyst.in.xtremo@gmail.com> Cc: freebsd-x11@freebsd.org Subject: Re: Issue with DRI after latest update Message-ID: <20141004120652.GF53855@ivaldir.etoilebsd.net> In-Reply-To: <CAOrhW_DqcV3Pab_mu450VObMABCXB9NPpLKtXX8jUy%2BaZO4=rA@mail.gmail.com> References: <CAOrhW_Bimf1W=46tNwu01%2Bt-yVcTsTd%2BJo56JTWrPHyOhf81%2BA@mail.gmail.com> <CAOrhW_DqcV3Pab_mu450VObMABCXB9NPpLKtXX8jUy%2BaZO4=rA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--BzCohdixPhurzSK4 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Oct 04, 2014 at 02:50:55PM +0300, xtremyst inxtremo wrote: > I think I solved it, I added WITHOUT_NEW_XORG=3Dyes at my /etc/make.conf, > rebuild xorg-server and the xorg-drivers I needed and DRI is enabled agai= n. > With this configuration xorg-server fails to start some times (after star= tx > I get a blank screen and my monitor turns off so I have to reset my > computer) but that's an old issue I've been dealing with > from the first day I installed FreeBSD. Anyway, I hope this might help > someone else with the same problem. > Best regards! >=20 > On Fri, Oct 3, 2014 at 8:18 PM, xtremyst inxtremo < > xtremyst.in.xtremo@gmail.com> wrote: >=20 > > Hello everyone, I'm fairly new to FreeBSD but really excited about this > > OS. I currently have FreeBSD 10 p9 running on my AMD desktop with ATI 2= 100 > > as my graphics card. After the latest update (packages updated were > > xf86-video-ati, xorg-server, dri libGL, dri3proto, libglapi, presentpro= to, > > linxsshmference, xf86-inpu-mouse and xf86-input-keyboard) DRI is disabl= ed > > and I can no longer use xv as video output driver with mplayer. > > > > Running dmesg gives me some errors: > > drmn0: info: WB enabled > > drmn0: info: fence driver on ring 0 use gpu addr 0x0000000060000000 and > > cpu addr 0x0xfffff80007750000 > > info: [drm] Loading RS690/RS740 Microcode > > info: [drm] radeon: ring at 0x0000000060001000 > > error: [drm:pid1976:r100_ring_test] *ERROR* radeon: ring test failed > > (scratch(0x15E4)=3D0xCAFEDEAD) > > error: [drm:pid1976:r100_cp_init] *ERROR* radeon: cp isn't working (-22= ). > > drmn0: error: failed initializing CP (-22). > > drmn0: error: Disabling GPU acceleration > > error: [drm:pid1976:r100_cp_fini] *ERROR* Wait for CP idle timeout, > > shutting down CP. > > error: [drm:pid1976:r100_cp_disable] *ERROR* Failed to wait GUI idle wh= ile > > programming pipes. Bad things might happen. > > info: [drm] radeon: cp finalized > > info: [drm] radeon_device_init: Taking over the fictitious range > > 0xf0000000-0xf8000000 > > iicbus0: <Philips I2C bus> on iicbb0 addr 0xff > > iic0: <I2C generic I/O> on iicbus0 > > iicbus1: <Philips I2C bus> on iicbb1 addr 0xff > > iic1: <I2C generic I/O> on iicbus1 > > iicbus2: <Philips I2C bus> on iicbb2 addr 0xff > > iic2: <I2C generic I/O> on iicbus2 > > iicbus3: <Philips I2C bus> on iicbb3 addr 0xff > > iic3: <I2C generic I/O> on iicbus3 > > info: [drm] Radeon Display Connectors > > info: [drm] Connector 0: > > info: [drm] VGA-1 > > info: [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7= e4c > > info: [drm] Encoders: > > info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 > > error: [drm:pid1976:rs600_irq_set] *ERROR* Can't enable IRQ/MSI because= no > > handler is installed > > info: [drm] Initialized radeon 2.29.0 20080528 > > > > Also cat /var/log/Xorg.0.log | grep DRI gives me: > > [ 75.845] (II) Loading extension DRI2>> DRI > > [ 75.903] (II) Loading extension XFree86-DRI > > [ 80.166] (II) AIGLX: Screen 0 is not DRI2 capable > > [ 80.166] (II) AIGLX: Screen 0 is not DRI capable > > [ 80.825] (II) GLX: Initialized DRISWRAST GL provider for screen 0 > > > > And finally cat /var/log/Xorg.1.log | grep DRI: > > (II) Loading extension XFree86-DRI > > (II) Loading extension DRI2 > > (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module > > version 1.31.0 > > (EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI. > > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > > > > Is there anyway to get DRI back? Without it I can't watch any videos > > fullscreen because audio and video get out of sync. > > > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" if you have the ability to try new xorg again, can you try with the ati-ums driver? regards, Bapt --BzCohdixPhurzSK4 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlQv4twACgkQ8kTtMUmk6EycDACfT4B7sM/DJDptFJY/32nxRXUI IOYAnjBkyGxluS7fCpdLtKlO05lvQNqb =WDYb -----END PGP SIGNATURE----- --BzCohdixPhurzSK4--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141004120652.GF53855>