Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 18 May 2000 11:33:23 -0400 (EDT)
From:      wietse@porcupine.org (Wietse Venema)
To:        freebsd-mobile@freebsd.org
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: Need FreeBSD 4.0 removable SCSI support
Message-ID:  <20000518153323.C01FC4563D@spike.porcupine.org>
In-Reply-To: <20000518170300.A6979@lpthe.jussieu.fr> from Michel Talon at "May 18, 0 05:03:00 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
Summary: I'm stuck at FreeBSD 2.2.8 because removable SCSI devices
are not supported in FreeBSD 3.4. Meanwhile, I need up-to-date
Linux emulation for Star Office, which does not run on FreeBSD 2.2.8.

At the suggestion of several respondents I installed FreeBSD
4.0-STABLE on my Thinkpad 600. I downloaded 4.0-20000518-STABLE
and installed the bin/* files including pre-compiled kernel.

I use IRQ 3+9 for pccard devices which works fine with the removable
modem and ethernet cards. See dmesg messages below.

When I insert the Adaptec 1460B SCSI controller, the machine locks
up after "camcontrol rescan 0", exactly like it did with FreeBSD
4.0-RELEASE yesterday.

On the other hand, SUSE Linux recognizes the controller and the
attached JAZ disk even before it has installed Linux. Star Office
runs on Linux, and I can use VMware to run Crap if I need to.

I can no longer afford to be stuck on FreeBSD 2.2.8. My best bet
is to migrate to 3.4 for just one month without SCSI, and then kiss
FreeBSD goodbye forever. Too bad, I liked running a real operating
system.

	Wietse

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-20000518-STABLE #0: Thu May 18 11:32:01 GMT 2000
    root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134021120 (130880K bytes)
avail memory = 126484480 (123520K bytes)
Preloaded elf kernel "kernel" at 0xc03c9000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 3.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device 7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
isa_compat: didn't get irq for lnc
ad0: 6149MB <IBM-DBCA-206480> [13328/15/63] at ata0-master using UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1702BC> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
pccard: card inserted, slot 1
aic1: <Adaptec 6260/6360 SCSI controller> at port 0x340-0x35f irq 3 slot 0 on pccard0
aic1: aic6360, dma, disconnection, parity check
ed1 at port 0x240-0x25f iomem 0xd4000-0xd7fff irq 9 slot 1 on pccard1
ed1: supplying EUI64: 00:04:ac:ff:fe:25:da:dd
ed1: address 00:04:ac:25:da:dd, type NE2000 (16 bit) 
ed1: starting DAD for fe80:000a::0204:acff:fe25:dadd
ed1: DAD complete for fe80:000a::0204:acff:fe25:dadd - no duplicates found
(probe0:aic1:0:0:0): ccb 0xc0b3c000 - timed out, phase 0xa6, state 1


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000518153323.C01FC4563D>