Date: Wed, 22 Oct 2003 19:47:14 +0200 From: Sven Esbjerg <esbjerg@xbsd.net> To: freebsd-current@freebsd.org Subject: SCSI cd errors Message-ID: <20031022174714.GA17131@gosling.home.xbsd.net>
next in thread | raw e-mail | index | archive | help
--huq684BweRXVnRxX
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I upgraded my PC yesterday and have experienced "hangs" in boot. It seems
like something has changed in the SCSI or GEOM code. I have an Advansys SCSI
controller with two plextor CD drivers attached as well as a HP scanner.
When the CD drives are detected the system hangs. Booting with verbose output
shows errors and timeouts.
The errors:
(probe2:adv0:0:2:0): Retrying Command
(probe2:adv0:0:2:0): error 22
(probe2:adv0:0:2:0): Unretryable Error
(probe4:adv0:0:4:0): error 22
(probe4:adv0:0:4:0): Unretryable Error
(probe6:adv0:0:6:0): error 22
(probe6:adv0:0:6:0): Unretryable Error
GEOM: create disk cd0 dp=0xc68d9e00
GEOM: create disk cd1 dp=0xc6916e00
pass0 at adv0 bus 0 target 2 lun 0
pass0: <HP C7670A 3925> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
pass1 at adv0 bus 0 target 4 lun 0
pass1: <PLEXTOR CD-R PX-W1210S 1.00> Removable CD-ROM SCSI-2 device
pass1: 10.000MB/s transfers (10.000MHz, offset 15)
pass2 at adv0 bus 0 target 6 lun 0
pass2: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 15)
pass0 at adv0 bus 0 target 2 lun 0
pass0: <HP C7670A 3925> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
GEOM: new disk cd0
GEOM: new disk cd1
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
(cd0:adv0:0:4:0): Retrying Command
(cd1:adv0:0:6:0): Retrying Command
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
cd0 at adv0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R PX-W1210S 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
cd1 at adv0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
It hangs after announcing it has launched CPU #1 when it prints:
(cd0:adv0:0:4:0): Retrying Command
uname -an
FreeBSD enzo.home.xbsd.net 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Tue Oct 21
21:39:57 CEST 2003 root@enzo.home.xbsd.net:/usr/obj/usr/src/sys/ENZO i386
Full dmesg attached.
If any other info is needed please ask.
Sven Esbjerg
--huq684BweRXVnRxX
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.v"
0000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30911106)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdef0
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 7 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 7 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 7 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 1 0 7 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 8 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 8 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 8 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 8 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 9 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 3 0 9 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 9 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 9 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 10 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 10 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 10 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 10 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.2
\\_SB_.PCI0.LNKD irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 26, enabled
found-> vendor=0x1106, dev=0x3091, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
IOAPIC #0 intpin 11 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 00009000, size 8, enabled
map[14]: type 1, range 32, base fa221000, size 8, enabled
found-> vendor=0x10cd, dev=0x1300, revid=0x03
bus=0, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=2
IOAPIC #0 intpin 10 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 00009400, size 5, enabled
found-> vendor=0x1102, dev=0x0002, revid=0x06
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009800, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x06
bus=0, slot=8, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
IOAPIC #0 intpin 5 -> irq 10
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 1, range 32, base fa000000, size 20, enabled
found-> vendor=0x1105, dev=0x8300, revid=0x02
bus=0, slot=10, func=0
class=04-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 00009c00, size 3, enabled
map[14]: type 4, range 32, base 0000a000, size 2, enabled
map[18]: type 4, range 32, base 0000a400, size 3, enabled
map[1c]: type 4, range 32, base 0000a800, size 2, enabled
map[20]: type 4, range 32, base 0000ac00, size 6, enabled
map[24]: type 1, range 32, base fa200000, size 17, enabled
found-> vendor=0x105a, dev=0x4d30, revid=0x02
bus=0, slot=12, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
IOAPIC #0 intpin 12 -> irq 11
Freeing (NOT implemented) redirected PCI irq 12.
map[10]: type 1, range 32, base fa220000, size 12, enabled
map[14]: type 4, range 32, base 0000b000, size 6, enabled
map[18]: type 1, range 32, base fa100000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3074, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b400, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 12.
map[20]: type 4, range 32, base 0000b800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 12.
map[20]: type 4, range 32, base 0000bc00, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 12.
map[20]: type 4, range 32, base 0000c000, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf6000000-0xf8ffffff
pcib1: prefetched decode 0xf4000000-0xf5ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 3, range 32, base f4000000, size 25, enabled
map[14]: type 1, range 32, base f6000000, size 14, enabled
map[18]: type 1, range 32, base f7000000, size 23, enabled
found-> vendor=0x102b, dev=0x2527, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0x9000-0x90ff mem 0xfa221000-0xfa2210ff irq 2 at device 7.0 on pci0
adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 16
pcm0: <Creative EMU10K1> port 0x9400-0x941f irq 5 at device 8.0 on pci0
emu: setmap (272000, 800), nseg=1, error=0
emu: setmap (26f000, 1000), nseg=1, error=0
pcm0: <TriTech TR28602 AC97 Codec (id = 0x54524123)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
emu: setmap (2e6000, 1000), nseg=1, error=0
emu: setmap (2e4000, 1000), nseg=1, error=0
emu: setmap (262000, 1000), nseg=1, error=0
emu: setmap (3e200000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 27b000, 1000; 0xc6927000 -> 27b000
pcm0: sndbuf_setmap 279000, 1000; 0xc6925000 -> 279000
pci0: <multimedia> at device 10.0 (no driver attached)
atapci0: <Promise PDC20267 UDMA100 controller> port 0xac00-0xac3f,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c07 mem 0xfa200000-0xfa21ffff irq 5 at device 12.0 on pci0
atapci0: [MPSAFE]
ata2: reset tp1 mask=03 ostat0=00 ostat1=00
ata2-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata2-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata2: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata2: at 0x9c00 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=03 ostat0=00 ostat1=00
ata3-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata3: at 0xa400 on atapci0
ata3: [MPSAFE]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb000-0xb03f mem 0xfa100000-0xfa1fffff,0xfa220000-0xfa220fff irq 11 at device 13.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:30:48:41:b9:ba
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0xb400-0xb40f at device 17.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=01 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 3
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 4, iclass 3/1
ums0: 4 buttons and Z dir.
ukbd0: Sun Microsystems Type 6 USB keyboard, rev 1.00/1.02, addr 5, iclass 3/1
kbd0 at ukbd0
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 11 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 11 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xc441 0xc451 0xc441 0xc441
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc441 0xc449 0xc441 0xc441
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
adv: adv0 already exists; skipping it
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd8000-0xdffff,0xd4000-0xd7fff,0xcc000-0xd3fff,0xc0000-0xc8fff on isa0
pmtimer0 on isa0
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 2, 3, 4, 6, 7, 9, 14, 15, apic_imen: 0xffff3d23
Device configuration finished.
linprocfs registered
procfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 801822610 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on VIA 8233 chip
GEOM: create disk ad0 dp=0xc69f8b70
ad0: <ST380021A/3.10> ATA-5 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:40965687
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:40965750 l:115330635
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 20974431744 end 20974463999
GEOM: Configure ad0s2, start 20974464000 length 59049285120 end 80023749119
GEOM: Configure ad0s2a, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s2b, start 1073741824 length 3221225472 end 4294967295
GEOM: Configure ad0s2c, start 0 length 59049285120 end 59049285119
GEOM: Configure ad0s2d, start 4294967296 length 12884901888 end 17179869183
GEOM: Configure ad0s2e, start 17179869184 length 4294967296 end 21474836479
GEOM: Configure ad0s2f, start 21474836480 length 1073741824 end 22548578303
GEOM: Configure ad0s2g, start 22548578304 length 36500706816 end 59049285119
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
acd0: setting PIO4 on VIA 8233 chip
acd0: <CREATIVE DVD-ROM DVD6240E/0101> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe2:adv0:0:2:0): Retrying Command
(probe2:adv0:0:2:0): error 22
(probe2:adv0:0:2:0): Unretryable Error
(probe4:adv0:0:4:0): error 22
(probe4:adv0:0:4:0): Unretryable Error
(probe6:adv0:0:6:0): error 22
(probe6:adv0:0:6:0): Unretryable Error
GEOM: create disk cd0 dp=0xc68d9e00
GEOM: create disk cd1 dp=0xc6916e00
pass0 at adv0 bus 0 target 2 lun 0
pass0: <HP C7670A 3925> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
pass1 at adv0 bus 0 target 4 lun 0
pass1: <PLEXTOR CD-R PX-W1210S 1.00> Removable CD-ROM SCSI-2 device
pass1: 10.000MB/s transfers (10.000MHz, offset 15)
pass2 at adv0 bus 0 target 6 lun 0
pass2: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 15)
pass0 at adv0 bus 0 target 2 lun 0
pass0: <HP C7670A 3925> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
GEOM: new disk cd0
GEOM: new disk cd1
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
(cd0:adv0:0:4:0): Retrying Command
(cd1:adv0:0:6:0): Retrying Command
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
cd0 at adv0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-R PX-W1210S 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
cd1 at adv0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
(cd0:adv0:0:4:0): error 6
(cd0:adv0:0:4:0): Unretryable Error
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
(cd1:adv0:0:6:0): error 6
(cd1:adv0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
WARNING: driver "rtc" used unreserved major device number 202
WARNING: driver "vmmon" used unreserved major device number 200
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570+ $
/dev/vmmon: Module vmmon: initialized
vmnet1: bpf attached
fxp0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
drm0: <Matrox G550 (AGP)> mem 0xf7000000-0xf77fffff,0xf6000000-0xf6003fff,0xf4000000-0xf5ffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xf0000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
drm0: [MPSAFE]
cd9660: RockRidge Extension
--huq684BweRXVnRxX--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031022174714.GA17131>