Date: Thu, 17 Oct 2002 12:47:49 +0200 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Josh Tolbert <hemi@scoundrelz.net> Cc: freebsd-alpha@FreeBSD.ORG Subject: Re: Machine Check when booting dqa0? Message-ID: <20021017124749.A39487@freebie.xs4all.nl> In-Reply-To: <20021017013934.Y5784-100000@view.scoundrelz.net>; from hemi@scoundrelz.net on Thu, Oct 17, 2002 at 01:43:10AM -0500 References: <20021017013934.Y5784-100000@view.scoundrelz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 17, 2002 at 01:43:10AM -0500, Josh Tolbert wrote: Inquiring minds would like to know what Alpha model you use.. > Hi again, > I've managed to get FreeBSD installed (twice) on two separate IDE > drives. Unfortunately, when I go to boot the IDE drives, I get a Machine > Check halt. I'm not sure why I'm having a problem booting from the drive, > cause FreeBSD installs to the drive just fine. > Both drives are WDs (ugh, I don't like WDs, but it's what I had > laying around) of the 3.2G and 6.4G variety. The device (dqa0) shows up > along with the CD-ROM drive when I do a "show devices," but there's no > device model number or name like the CD-ROM's entry has. > I'm going to try moving the hard drive to the secondary channel > and using the CD-ROM on the primary channel to see if that makes any > difference, but I'm open to other suggestions. > > Thanks, > Josh > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message ---end of quoted text--- -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, the Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021017124749.A39487>