Date: Sat, 6 Apr 1996 09:56:40 -0800 (PST) From: Scott Blachowicz <scott@statsci.com> To: Jason T Glick <jason@cs.cs.miami.edu> Cc: questions@freebsd.org, korty@physics.purdue.edu Subject: Re: FreeBSD PPP & Slirp/PPP Message-ID: <Pine.BSF.3.92.960406094051.3492A-100000@one.sabami.seaslug.org> In-Reply-To: <31621FA3.5443@cs.miami.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
With a couple recent queries about FreeBSD PPP & Slirp/PPP I figured I'd post my configuration (which is a 2.1.0R FreeBSD box at home dialing into SunOS 4.x boxes at work). Here is part of my /etc/ppp/ppp.conf file (replace the *'s around login, password with real stuff and the phone number(s) and "PROMPT%" with your shell account prompt and use appropriate IP addresses...): # # Default setup. Executed always when PPP is invoked. # default: set device /dev/cuaa1 set speed 57600 set debug Chat set escape 0 disable lqr deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1%C1%M3&Q5S46=138S48=7S37=11 OK-AT-OK \\dATDT\\T TIMEOUT 50 CONNECT" sabslirp0: set phone ******* set dial "TIMEOUT 10 \"\" ATE0%C1%M3&Q5S46=138S48=7S37=11 OK-AT-OK \\dATDT\\T TIMEOUT 50 CONNECT-ATDT*******-CONNECT-ATDT*******-CONNECT" set login "TIMEOUT 30 login:-\\r-login: ******** word: ******** PROMPT% exec\\sslirp" set timeout 600 deny pred1 disable pred1 set ifaddr 10.0.2.15 198.145.127.9/22 add 0 255.255.255.0 198.145.127.9 ....and this is from the /etc/ppp/ppp.linkup file: # If we are invked with an argument ``iij-demand'', then # delete existing route entry and add peer as default gateway. # iij-demand: delete ALL add 0 0 HISADDR # # Otherwide, simply add peer as default gateway. # MYADDR: add 0 0 HISADDR ....and in my /etc/sysconfig I have this: network_interfaces="ed1 lo0 tun0" ifconfig_ed1="inet 10.0.0.1 netmask 0xffffff00" ifconfig_lo0="inet 127.0.0.1" ifconfig_tun0="" # use /etc/start_if.tun0 ....and this is my /etc/start_if.tun0 script: #! /bin/sh # # Script to start ppp daemon in autodialer mode. # echo "Starting auto-PPP link to StatSci on tun0:" > /dev/console ppp -auto sabslirp0 ....and this is my ~/.slirprc file on the SunOS box at work: -vj ppp baudrate 19200 mtu 552 mru 552 asyncmap 0 #debugppp initiate-options #ipcp-accept-remote redir X start 5 ....then there's DNS setup...in /etc/named.boot: directory /etc/namedb ; type domain source host/file backup file cache . db.cache primary 0.0.127.IN-ADDR.ARPA db.127.0.0 primary 0.IN-ADDR.ARPA db.0 primary 10.IN-ADDR.ARPA db.10 primary 255.IN-ADDR.ARPA db.255 ; not a "real" domain here vvvv primary sabami.seaslug.org db.sabami ; Forward to slirp DNS address forwarders 10.0.2.3 ....Hope that's enough to help some of y'all...I don't claim that it's optimal, but it does appear to work so I haven't messed with it too much. Scott Blachowicz Scott.Blachowicz@seaslug.org scott@statsci.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.92.960406094051.3492A-100000>