Date: Wed, 17 Sep 2003 16:56:46 +0800 (KRAST) From: Eugene Grosbein <eugen@www.svzserv.kemerovo.su> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/56944: 4.8 cannot boot on Intel Server Board SE7501HG2 with SCSI enabled Message-ID: <200309170856.h8H8ukxs013404@www.svzserv.kemerovo.su> Resent-Message-ID: <200309170900.h8H90dZr059037@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 56944
>Category: kern
>Synopsis: 4.8 cannot boot on Intel Server Board SE7501HG2 with SCSI enabled
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Sep 17 02:00:39 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Eugene Grosbein
>Release: FreeBSD 4.8-RELEASE i386
>Organization:
Svyaz Service JSC
>Environment:
System: tried FreeBSD 4.8-RELEASE ISO and
4.9-PRERELEASE-20030916-JPSNAP ISO images
>Description:
Mentioned versions of FreeBSD halt during device probing stage
while booting on Intel Server Board SE7501HG2. They do not
halt if Onboard SCSI is disabled using BIOS Setup,
that is not acceptable workaround.
Here comes reconstructed log of BIOS boot screens
and full 'boot -v' log of FreeBSD 4.8-RELEASE installation CD.
Serial Redir 2.0.5 [VT-100+]
ATI RAGE SDRAM BIOS P/N GR-xlints3y.09a-4.332
BIOS LAN Console 3.0
Copyright(C) 1997-2002 Intel Corporation
PXE-E61: Media test failure, check cable
AMBIOS (C)1985-2003 American Megatrends Inc.,
Copyright 1996-2003 Intel Corporation
S7501HG 0.86B.0047.P09.0307011125
S7501HG Production BIOS Version 9.00
BIOS Build 0047
2X Intel(R) Xeon(TM) CPU 2.66GHz
533MHz Front Side Bus
Testing system memory, memory size=1024MB
1024MB Extended Memory Passed
512K L2 Cache Enabled
LegacyKeyboard.... Detected
Press <F2> to enter SETUP, <F4> ServicePartition, <F12> Network
Fixed Disk 0: Maxtor 6Y120P0 (UDMA=100MHz)
ATAPI CD-ROM SONY CD-RW CRX225E
Adaptec SCSI BIOS v41003S2 (c) 2003 Adaptec,Inc. All Rights Reserved.
SlotChIDLUNVendorProductSizeBusStatus
---------------------------------------------------------------------
0 SEAGATE ST336753LW 37GB 1600B0
>How-To-Repeat:
Take that motherboard, boot 4.8-RELEASE.
>Fix:
Unknown to me. It boots if onboard SCSI is disabled.
>Release-Note:
>Audit-Trail:
>Unformatted:
>>FreeBSD/i386BOOT
Default:0:ad(0,a)/boot/loaderboot:-h
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 637kB/1047488kB available memory
boot -v
SMAP type=01 base=00000000 00000000 len=00000000 0009f400
SMAP type=02 base=00000000 0009f400 len=00000000 00000c00
SMAP type=02 base=00000000 000e8000 len=00000000 00018000
SMAP type=01 base=00000000 00100000 len=00000000 3fef0000
SMAP type=03 base=00000000 3fff0000 len=00000000 0000f000
SMAP type=04 base=00000000 3ffff000 len=00000000 00001000
SMAP type=02 base=00000000 fec00000 len=00000000 00100000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 fff00000 len=00000000 00100000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2657938544 Hz, i8254 clock: 1193114 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2658.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073676288 (1048512K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00544000 - 0x3ffe7fff, 1068122112 bytes (260772 pages)
config> di psm0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 1039847424 (1015476K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb20
bios32: Entry = 0xfdb34 (c00fdb34) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb55
pnpbios: Found PnP BIOS data at 0xc00f30c0
pnpbios: Entry = f0000:297d Rev = 1.0
Other BIOS signatures found:
ACPI: 000ff9b0
Preloaded elf kernel "kernel" at 0xc051d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc051d0a8.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80032000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086)
Using $PIR table, 18 entries at 0xc00f3590
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x254c, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2541, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2545, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=2
found-> vendor=0x8086, dev=0x2546, revid=0x01
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244e, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2480, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248b, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 000003a0, size 4
found-> vendor=0x8086, dev=0x2483, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=0
map[20]: type 1, range 32, base 00000580, size 5
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febe0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x1461, revid=0x04
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base febf0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
found-> vendor=0x8086, dev=0x1010, revid=0x01
class=02-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 64, base fea60000, size 17
map[20]: type 1, range 32, base 00003040, size 6
found-> vendor=0x8086, dev=0x1010, revid=0x01
class=02-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 64, base fea80000, size 17
map[20]: type 1, range 32, base 00003000, size 6
pci4: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x3040-0x307f mem 0xfea60000-0xfea7ffff irq 9 at device 5.0 on pci4
bpf: em0 attached
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x3000-0x303f mem 0xfea80000-0xfea9ffff irq 9 at device 5.1 on pci4
using shared irq9.
bpf: em1 attached
em1: Speed:N/A Duplex:N/A
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
found-> vendor=0x9005, dev=0x801f, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00002800, size 8
map[14]: type 1, range 64, base fe9e0000, size 13
map[1c]: type 1, range 32, base 00002c00, size 8
found-> vendor=0x9005, dev=0x801f, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 64, base fe9f0000, size 13
map[1c]: type 1, range 32, base 00002400, size 8
pci3: <PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xfe9e0000-0xfe9e1fff irq 9 at device 4.0 on pci3
ahd0: Defaulting to MEMIO on
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 716 instructions downloaded
ahd0: Features 0x101, Bugs 0xfffff, Flags 0x43f0
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xfe9f0000-0xfe9f1fff irq 9 at device 4.1 on pci3
ahd1: Defaulting to MEMIO on
ahd1: Reading SEEPROM...done.
ahd1: STPWLEVEL is on
ahd1: Manual Primary Termination
ahd1: Manual Secondary Termination
ahd1: Primary High byte termination Enabled
ahd1: Primary Low byte termination Enabled
ahd1: Secondary High byte termination Disabled
ahd1: Secondary Low byte termination Disabled
ahd1: Downloading Sequencer Program... 716 instructions downloaded
ahd1: Features 0x101, Bugs 0xfffff, Flags 0x43f0
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 00001000, size 8
map[18]: type 1, range 32, base fe5f0000, size 12
pci1: <PCI bus> on pcib4
pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x03a0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x03a8
ata1: mask=03 ostat0=7f ostat2=50
ata1-master: ATAPI 7f 7f
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=7f stat1=00
ata1-master: ATA 7f 7f
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
Here is halts hard. For example, keyboard "NumLock", "CapsLock"
lights do not switch.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309170856.h8H8ukxs013404>