Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 5 Jul 2006 23:23:39 -0700
From:      "Ted Mittelstaedt" <tedm@toybox.placo.com>
To:        "William" <willay@gmail.com>
Cc:        Antony Mawer <fbsd-questions@mawer.org>, freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 6.0 compat with DL320 G4
Message-ID:  <003601c6a0c4$b9437d80$3c01a8c0@coolf89ea26645>
References:  <a24358fb0605050239y1550f5d1o6bc461b4d3cc9472@mail.gmail.com><a24358fb0606292253h55590f33y9fe7828f1126d94e@mail.gmail.com><44A4BFA3.8090503@mawer.org><a24358fb0606292356p517ee8ccj239a1be8c0ecc62b@mail.gmail.com><20060630072718.GA69997@owl.midgard.homeip.net><44A862F5.80203@mawer.org><a24358fb0607031056o2dce9049ufe020702d1c1f7f1@mail.gmail.com><001b01c69f27$7a58f8f0$3c01a8c0@coolf89ea26645><a24358fb0607032305k3786b912xd84324a06d60f51c@mail.gmail.com><022601c69f49$7d6be5d0$3c01a8c0@coolf89ea26645> <a24358fb0607040247y75d725f8wa4b788b4c42fd57e@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help

Go here:

http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/em/

click on the file you want.  You will probably need all the files there
other than LICENSE and README

right-click download, save to disk, copy to your running freebsd system,
from that system copy to freebsd-formatted floppy disk, unmount floppy disk,
take disk to dl320, mount disk, copy to /usr/src/sys/dev/em/ and recompile
the kernel.

Ted

----- Original Message ----- 
From: "William" <willay@gmail.com>
To: "Ted Mittelstaedt" <tedm@toybox.placo.com>
Cc: "Antony Mawer" <fbsd-questions@mawer.org>;
<freebsd-questions@freebsd.org>
Sent: Tuesday, July 04, 2006 2:47 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4


> Ted,
>
> Apoligises for being difficult, I must be suffering from my super
> early mornings and information overload.
>
> Thank you for explaining it, my dealer has picked up on the fact that
> I'll require the PT instead of MT card that I suggested.
>
> Thanks again for your help, what would be the best way of grabbing the
> latest driver for em for the 1000PT card?
>
> Regards,
>
> Will
>
> On 04/07/06, Ted Mittelstaedt <tedm@toybox.placo.com> wrote:
> > I think your trying to second-guess very simple instructions and making
> > things very
> > hard for yourself.  I'll try to explain one last time then I'll throw my
> > hands up in
> > the air
> >
> > The HP DL320 G4 slots, whether PCI-X or PCI Express, to be accessible,
> > MUST USE A RISER CARD.  HP has TWO different riser cards available.
> >
> > BOTH riser cards have TWO slots, a half-height and a full height.
> >
> > The first riser card has a half-height PCI-Express slot, and a
full-height
> > PCI Express slot.  This is the riser card that is supplied by the
factory
> > and it comes with the server.
> >
> > The second riser card is OPTIONAL and it contains a half-height
> > PCI-Express slot and a full-height PCI-X slot.  It REPLACES the
> > factory-supplied riser card, if you use it.
> >
> >
> > The Intel MT card is a PCI-X card.  It will not fit in a PCI Express
slot.
> > It
> > works with FBSD 6.1
> >
> > The Intel PT card is a PCI Express card.  It will not fit in a PCI-X
slot.
> > It does not work with FBSD 6.1 unless you load the driver.
> >
> > You can either do ONE of the following:
> >
> > 1) Use the Intel MT card with the optional HP PCI-X riser card.  This
works
> > out
> > of box with FBSD 6.1
> >
> > 2) Use the Intel PT card with the HP riser card that ships with the
server.
> > This DOES
> > NOT work out of the box with FBSD 6.1  You MUST load the current driver
for
> > this to work.
> >
> > You CANNOT USE the MT card with the riser card that ships with the
server.
> >
> > You CANNOT use a low-profile PCI-X card because the optional PCI-X
> > riser card DOES NOT HAVE a low profile PCI-X slot.  It has a standard
> > height PCI-X slot ONLY.
> >
> > Incidentally the fact that your HP dealer cannot apparently explain this
to
> > you pretty much means YOUR HP DEALER SUCKS THE BIG WEENIE.
> >
> > Ted
> >
> > ----- Original Message -----
> > From: "William" <willay@gmail.com>
> > To: "Ted Mittelstaedt" <tedm@toybox.placo.com>
> > Cc: "Antony Mawer" <fbsd-questions@mawer.org>;
> > <freebsd-questions@freebsd.org>
> > Sent: Monday, July 03, 2006 11:05 PM
> > Subject: Re: FreeBSD 6.0 compat with DL320 G4
> >
> >
> > > Ok, I think its best I just order a Intel MT card with the low profile
> > > PCI-X adapter instead of flapping about with these riser cards and
> > > then just use 6-stable. All getting quite confusing.
> > >
> > > On 04/07/06, Ted Mittelstaedt <tedm@toybox.placo.com> wrote:
> > > >
> > > > Correct, it will not fit - unless you order the PCI-X riser card
from HP
> > and
> > > > replace the PCI-Express riser card that ships with the 320 with the
> > PCI-X
> > > > riser card.
> > > >
> > > > Ted
> > > >
> > > > ----- Original Message -----
> > > > From: "William" <willay@gmail.com>
> > > > To: "Antony Mawer" <fbsd-questions@mawer.org>
> > > > Cc: <freebsd-questions@freebsd.org>; "Ted Mittelstaedt"
> > > > <tedm@toybox.placo.com>
> > > > Sent: Monday, July 03, 2006 10:56 AM
> > > > Subject: Re: FreeBSD 6.0 compat with DL320 G4
> > > >
> > > >
> > > > > Did you guys say the card I've got in another box wont fit into a
320?
> > > > >
> > > > > On 03/07/06, Antony Mawer <fbsd-questions@mawer.org> wrote:
> > > > > > On 29/06/2006 9:27 PM, Erik Trulsson wrote:
> > > > > > > On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
> > > > > > >> Antony,
> > > > > > >>
> > > > > > >> I've got an Intel card in production already on a homebrew
box,
> > the
> > > > > > >> code is INTEL-PWLA8492MT and description is "Intel Dual Port
> > Server
> > > > > > >> Adapter 10/100/1000". Any idea if that will do?
> > > > > > >
> > > > > > > That is a PRO/1000 MT card, which is a PCI-X adapter and is
> > supported
> > > > > > > by the standard em(4) driver in FreeBSD 6.x,
> > > > > > >
> > > > > > > The PRO/1000 PT mentioned below is a PCI-Express adapter and
is
> > not
> > > > > > > supported by the standard driver in 6.x, but (as mentioned)
should
> > > > > > > be supported by the driver available from Intel.
> > > > > >
> > > > > > If you wish to utilise the PCI Express expansion slots by using
a
> > > > > > Pro/1000 PT network adapter, the procedure to follow might be
> > something
> > > > > > like be this:
> > > > > >
> > > > > > 1. Install 6.1-RELEASE from CD, being sure to install the kernel
> > source
> > > > > > 2. Obtain the latest Intel driver for FreeBSD 6.x (if it is
still
> > not
> > > > > > available on the website, email me and I will send it to you)
> > > > > > 3. Burn the driver onto a CD or other media and copy it onto the
> > server
> > > > > > 4. Extract the driver source, and copy the if_em* files across
into
> > > > > > /usr/src/sys/dev/em/
> > > > > > 5. Build a new kernel (GENERIC will suffice) which will utilise
the
> > new
> > > > > > driver source (cd /usr/src && make buildkernel)
> > > > > > 6. Install the kernel and reboot (make installkernel)
> > > > > >
> > > > > > You should now have a working network with your Pro/1000 PT...
> > > > > >
> > > > > > Regards
> > > > > > Antony
> > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > > freebsd-questions@freebsd.org mailing list
> > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > > To unsubscribe, send any mail to
> > > > "freebsd-questions-unsubscribe@freebsd.org"
> > > > >
> > > >
> > > >
> > > _______________________________________________
> > > freebsd-questions@freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > To unsubscribe, send any mail to
> > "freebsd-questions-unsubscribe@freebsd.org"
> > >
> >
> >
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003601c6a0c4$b9437d80$3c01a8c0>