Date: Thu, 8 Mar 2001 22:42:50 -0500 From: Lee Cremeans <lcremeans@erols.com> To: David Kelly <dkelly@hiwaay.net> Cc: Lee Cremeans <lcremeans@erols.com>, Andrew Hesford <ajh3@chmod.ath.cx>, questions@freebsd.org, stable@freebsd.org Subject: Re: ABIT KT7 and temp monitoring Message-ID: <20010308224250.A3951@lcremeans.homeip.net> In-Reply-To: <200103090243.f292hke00262@grumpy.dyndns.org>; from dkelly@hiwaay.net on Thu, Mar 08, 2001 at 08:43:45PM -0600 References: <lcremeans@erols.com> <200103090243.f292hke00262@grumpy.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Mar 08, 2001 at 08:43:45PM -0600, David Kelly wrote: > Lee Cremeans writes: > > On Thu, Mar 08, 2001 at 03:29:49PM -0600, Andrew Hesford wrote: > > > You do have smbus and all that good stuff in your kernel, right? > > > > > > Without that stuff in my kernel, lmmon tells me my processor runs at 255 > > > degrees C, and the fans spin at 0 rpm. With that stuff in, my kernel > > > panics. :| > > > > I do, but I don't see any smb devices come up (to be expected, since this > > board uses a VIA chipset and there's no SMB driver for it yet :/), and ISA > > detection returns a chip ID of 255 either way. > > On an Asus A7V (VIA chipset) I get this far but as with the original > posting about the KT7, lmmon and healthd don't read sane answers. > > Extract from dmesg: > > pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0 > iicbus0: <Philips I2C bus> on pcf0 addr 0xaa > iicsmb0: <I2C to SMB bridge> on iicbus0 > smbus0: <System Management Bus> on iicsmb0 > smb0: <SMBus general purpose I/O> on smbus0 > iic0: <I2C general purpose I/O> on iicbus0 > Hmm. I'll have to try the pcf driver, it looks like. I'll let everyone know how it goes. -lee -- +--------------------------------------------------------------------+ | Lee Cremeans -- Manassas, VA, USA (WakkyMouse on WTnet) | | lcremeans@erols.com | http://wakky.dyndns.org/~lee | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010308224250.A3951>