Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 Nov 2006 18:53:16 -0700 (MST)
From:      "M. Warner Losh" <imp@bsdimp.com>
To:        daimon@dev-random.org
Cc:        freebsd-arm@freebsd.org
Subject:   Re: Question about "make trampoline" on FreeBSD
Message-ID:  <20061123.185316.-1717446433.imp@bsdimp.com>
In-Reply-To: <20061124013156.GI2324@mail.secure.net>
References:  <20061124002310.GA2324@mail.secure.net> <20061123.175756.-1398301896.imp@bsdimp.com> <20061124013156.GI2324@mail.secure.net>

next in thread | previous in thread | raw e-mail | index | archive | help
In message: <20061124013156.GI2324@mail.secure.net>
            David Sharp <daimon@dev-random.org> writes:
: On 2006.11.23 17:57:56 +0000, M. Warner Losh wrote:
: > SD root isn't that slow.  I get from power on to login prompt in 1
: > minute on the machines at work as well as the KB9202 boards.  Over NFS
: > root it takes about the same amount of time.  Maybe there's something
: > weird in your setup...
: 
: NFS is quite a bit faster than SD for me, so as you suggest my hw is
: prolly broken.  i think i got all the pullups in the right place.  it
: has not failed to load but is just slow to read/write.  perhaps 
: another sd card might fix things.  are the ...bus width to 1 messages
: normal?
: 
: Timecounter "AT91RM9200 timer" frequency 32768 Hz quality 1000
: Timecounters tick every 7.812 msec
: at91_mci0: Setting controller bus width to 1
: at91_mci0: Setting controller bus width to 1
: at91_mci0: Setting controller bus width to 1
: at91_mci0: Setting controller bus width to 1
: at91_mci0: Setting controller bus width to 1
: at91_mci0: Setting controller bus width to 1
: SD CARD: 500695040 bytes
: at91_mci0: Setting controller bus width to 1
: mmcsd0: <mmc or sd flash card> on mmc0
: mmc0: setting transfer rate to 30.000MHz
: at91_mci0: Setting controller bus width to 1
: Trying to mount root from ufs:mmcsd0s1a

Yes.  the bus width messages are normal, but I should likely add
support for 4bit too.  It isn't that hard, I just haven't had a chance
to do it.

Warner



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061123.185316.-1717446433.imp>